SATA issues with HP Proliant DL140 server

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

SATA issues with HP Proliant DL140 server

Henrik Olsson
Hi

I would like to know if anyone of you out there ever installed OpenBSD
on the HP DL140 server? I had some initial trouble with the pciide
driver which had to be disabled on order to get the GENERIC kernel
started. Since im not going to use any PATA devices in my box i
decided to compile the kernel without pciide support and only use
the SATA controller. Said and done OpenBSD 3.8-current installed
nicely using PXE boot but when i boot the startup tells me that the
SATA disks are using BIOS timings.

In order to get a little bit more performance out of the disks i would
like the kernel set the drives to use PIO mode and Ultra-DMA mode.

Have anyone else out there solved this problem using this kind of
hardware? i have included the "dmesg" and "atactl wd0 identify"

/Henrik

---

OpenBSD 3.8 (xxxxxx) #0: Tue Nov 15 17:46:33 CET 2005
    root@xxxxxxxxx:/usr/src/sys/arch/i386/compile/xxxxxxx
cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,CNXT-ID
real mem  = 1072717824 (1047576K)
avail mem = 971841536 (949064K)
using 4278 buffers containing 53739520 bytes (52480K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(21) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xfd410
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xfd410/0xbf0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfde30/432 (25 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #8 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1600 0xc9800/0x1600
0xdc000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel E7710 SMCH" rev 0x0c
"Intel E7710 MCH ERR" rev 0x0c at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci1 at ppb0 bus 1
ppb1 at pci0 dev 4 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 5 address 00:15:60:09:d3:de
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 5 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci3 at ppb2 bus 3
bge1 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1
(0x4101): irq 5 address 00:15:60:09:d3:df
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 6 function 0 "Intel E7710 MCH PCIE" rev 0x0c
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci5 at ppb4 bus 5
ppb5 at pci5 dev 1 function 0 "Intel S21152BB PCI-PCI" rev 0x00
pci6 at ppb5 bus 6
ste0 at pci6 dev 4 function 0 "D-Link Systems 550TX" rev 0x15: irq 5
address 00:0d:88:53:3c:2c
ukphy0 at ste0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0090c3, model 0x0004, rev. 0
ste1 at pci6 dev 5 function 0 "D-Link Systems 550TX" rev 0x15: irq 10
address 00:0d:88:53:3c:2d
ukphy1 at ste1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0090c3, model 0x0004, rev. 0
ste2 at pci6 dev 6 function 0 "D-Link Systems 550TX" rev 0x15: irq 10
address 00:0d:88:53:3c:2e
ukphy2 at ste2 phy 1: Generic IEEE 802.3u media interface
ukphy2: OUI 0x0090c3, model 0x0004, rev. 0
ste3 at pci6 dev 7 function 0 "D-Link Systems 550TX" rev 0x15: irq 3
address 00:0d:88:53:3c:2f
ukphy3 at ste3 phy 1: Generic IEEE 802.3u media interface
ukphy3: OUI 0x0090c3, model 0x0004, rev. 0
vendor "Intel", unknown product 0x0326 (class system subclass interrupt,
rev 0x09) at pci4 dev 0 function 1 not configured
ppb6 at pci4 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci7 at ppb6 bus 7
vendor "Intel", unknown product 0x0327 (class system subclass interrupt,
rev 0x09) at pci4 dev 0 function 3 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801EB/ER USB" rev 0x02: irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801EB/ER USB" rev 0x02: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801EB/ER USB" rev 0x02: irq 11
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb7 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci8 at ppb7 bus 8
vga1 at pci8 dev 1 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
"Intel 82801EB SATA" rev 0x02 at pci0 dev 31 function 2 not configured
"Intel 82801EB/ER SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <Maxtor 6L080M0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(wdc0:0:0): using BIOS timings
wdc1 at isa0 port 0x170/8 irq 15
wd1 at wdc1 channel 0 drive 0: <Maxtor 6L080M0>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1(wdc1:0:0): using BIOS timings
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
biomask fbed netmask ffed ttymask ffef
pctr: user-level cycle counter enabled
Kernelized RAIDframe activated
raid0 (root): (RAID Level 1) total number of sectors is 6291840 (3072 MB)
raid1 (root): (RAID Level 1) total number of sectors is 144785920 (70696 MB)
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302


---------

Model: Maxtor 6L080M0, Rev: BANC1G10, Serial #: L20VXEBG
Device type: ATA, fixed
Cylinders: 16383, heads: 16, sec/track: 63, total sectors: 156301488
Device capabilities:
        ATA standby timer values
        IORDY operation
        IORDY disabling
Device supports the following standards:
ATA-1 ATA-2 ATA-3 ATA-4 ATA-5 ATA-6 ATA-7
Device supports the following command sets:
        NOP command
        READ BUFFER command
        WRITE BUFFER command
        Read look-ahead
        Write cache
        Power Management feature set
        SMART feature set
        Flush Cache Ext command
        Flush Cache command
        Device Configuration Overlay feature set
        48bit address feature set
        Set Max security extension commands
        Advanced Power Management feature set
        DOWNLOAD MICROCODE command
        SMART self-test
        SMART error logging
Device has enabled the following command sets/features:
        NOP command
        READ BUFFER command
        WRITE BUFFER command
        Read look-ahead
        Power Management feature set
        SMART feature set
        Flush Cache Ext command
        Flush Cache command
        Device Configuration Overlay feature set
        48bit address feature set
        DOWNLOAD MICROCODE command