SAS RAID Controller of SunFire X4150 causes trouble

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

SAS RAID Controller of SunFire X4150 causes trouble

Schafhauser, Florian
Hello,

the RAID Controller causes trouble with OpenBSD 4.5 and 4.6.

Reading and writing is quite slow. When I use I/O intensive applications like
squid, machine dies within next 30 minutes.
Only ping requests were answered.

Here a small write test:

Writing 102 MB (dd if=/dev/zero of=test bs=1024 count=100000):
SunFire X4150 Openbsd 4.6 i386:

102400000 bytes transferred in 15.978 secs (6408620 bytes/sec)
102400000 bytes transferred in 16.031 secs (6387525 bytes/sec)
102400000 bytes transferred in 16.011 secs (6395273 bytes/sec)

SunFire X4150 Gentoo Linux 64bit:

102400000 bytes (102 MB) copied, 1.45249 s, 70.5 MB/s
102400000 bytes (102 MB) copied, 1.59285 s, 64.3 MB/s
102400000 bytes (102 MB) copied, 1.58131 s, 64.8 MB/s

Any suggestions?

Thank you!

Florian

dmesg:
OpenBSD 4.6-stable (FWNODE) #0: Tue Feb 16 09:37:34 CET 2010
    [hidden email]:/usr/src/sys/arch/i386/compile/FWNODE
cpu0: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz ("GenuineIntel" 686-class) 2.33
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem  = 3757338624 (3583MB)
avail mem = 3648577536 (3479MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/03/09, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.4 @ 0xfccd0 (69 entries)
bios0: vendor American Megatrends Inc. version "1ADQW060" date 03/03/2009
bios0: Sun Microsystems SUN FIRE X4150
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR MCFG SSDT OEMB HPET TCPA SSDT EINJ BERT ERST
HEST
acpi0: wakeup devices SPE4(S1) SPE2(S1) SPE1(S5) P8PC(S5) P0P1(S1) UAR1(S5)
P0P5(S1) P0P6(S1) P0P7(S1) NPE4(S5) NPE5(S5) NPE6(S5) NPE7(S5) USB0(S1)
USB1(S1) USB2(S1) USB3(S1) EUSB(S1) BR1E(S5) OPH1(S5) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz ("GenuineIntel" 686-class) 2.33
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz ("GenuineIntel" 686-class) 2.33
GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz ("GenuineIntel" 686-class) 2.33
GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec80000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (NPE2)
acpiprt2 at acpi0: bus 2 (SPE4)
acpiprt3 at acpi0: bus -1 (SPE2)
acpiprt4 at acpi0: bus 3 (SPE1)
acpiprt5 at acpi0: bus 4 (P8PC)
acpiprt6 at acpi0: bus 15 (P0P1)
acpiprt7 at acpi0: bus -1 (P0P5)
acpiprt8 at acpi0: bus -1 (P0P6)
acpiprt9 at acpi0: bus -1 (P0P7)
acpiprt10 at acpi0: bus 7 (NPE4)
acpiprt11 at acpi0: bus 8 (NPE5)
acpiprt12 at acpi0: bus 9 (NPE6)
acpiprt13 at acpi0: bus 13 (NPE7)
acpiprt14 at acpi0: bus 14 (P0P4)
acpiprt15 at acpi0: bus 0 (BR1E)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x6800 0xc6800/0x1000 0xc7800/0x1000 0xc8800/0x5c00
0xce800/0x1000 0xcf800/0x1000 0xd0800/0x1000 0xd1800/0x1000
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 2328 MHz: speeds: 2336, 2003 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000P Host" rev 0xb1
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0xb1
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci2 dev 2 function 0 "Intel 6321ESB PCIE" rev 0x01
pci4 at ppb3 bus 4
em0 at pci4 dev 0 function 0 "Intel PRO/1000 PT (80003ES2)" rev 0x01: apic 4
int 18 (irq 11), address 00:23:8b:41:ba:4e
em1 at pci4 dev 0 function 1 "Intel PRO/1000 PT (80003ES2)" rev 0x01: apic 4
int 19 (irq 5), address 00:23:8b:41:ba:4f
ppb4 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci5 at ppb4 bus 5
ppb5 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
pci6 at ppb5 bus 6
ppb6 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0xb1
pci7 at ppb6 bus 7
mpi0 at pci7 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x04: apic 4 int 17
(irq 11)
scsibus0 at mpi0: 112 targets
sd0 at scsibus0 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct
fixed
sd0: 69618MB, 512 bytes/sec, 142577664 sec total
ppb7 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
pci8 at ppb7 bus 8
ppb8 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0xb1
pci9 at ppb8 bus 9
ppb9 at pci9 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
pci10 at ppb9 bus 10
ppb10 at pci10 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
pci11 at ppb10 bus 11
em2 at pci11 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 4
int 17 (irq 11), address 00:15:17:a9:ad:9d
em3 at pci11 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 4
int 16 (irq 10), address 00:15:17:a9:ad:9c
ppb11 at pci10 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
pci12 at ppb11 bus 12
em4 at pci12 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 4
int 19 (irq 5), address 00:15:17:a9:ad:9f
em5 at pci12 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 4
int 18 (irq 11), address 00:15:17:a9:ad:9e
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
pci13 at ppb12 bus 13
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09: apic 4 int 17
(irq 11)
pci14 at ppb13 bus 14
em6 at pci14 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 4
int 16 (irq 10), address 00:23:8b:41:ba:50
em7 at pci14 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 4
int 17 (irq 11), address 00:23:8b:41:ba:51
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 4 int 22
(irq 7)
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 4 int 23
(irq 6)
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 4 int 20
(irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 4 int 21
(irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 4 int 22
(irq 7)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb14 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci15 at ppb14 bus 15
vga1 at pci15 dev 5 function 0 "ASPEED Technology AST2000" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 6321ESB AHCI" rev 0x09: apic 4 int 21
(irq 5), AHCI 1.1
scsibus1 at ahci0: 32 targets
ichiic0 at pci0 dev 31 function 3 "Intel 6321ESB SMBus" rev 0x09: apic 4 int
22 (irq 11)
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 1 configuration 1 interface 0 "Texas Instruments
Incorporated 6250 FW: 04.02.02.22.562AD423" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd0 at scsibus2 targ 1 lun 0: <TSSTcorp, CD/DVDW TS-T632A, SR03> SCSI0 5/cdrom
removable
uhub5 at uhub0 port 6 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 3
uhidev0 at uhub2 port 2 configuration 1 interface 0 "American Megatrends Inc.
Virtual Keyboard and Mouse" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "American Megatrends Inc.
Virtual Keyboard and Mouse" rev 1.10/1.00 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
softraid0 at root
root on sd0a swap on sd0b dump on sd0b


Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: M|nchen  -  Registergericht: Amtsgericht M|nchen  -
Handelsregisternummer: HRA 57918
Persvnlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: M|nchen  -  Registergericht: Amtsgericht M|nchen  -
Handelsregisternummer: HRB 54477
Geschdftsf|hrer: Franz Kraus; Dr. Martin Prillmann

A new star is born - ALEXA the most versatile digital camera system.
Get all the latest information from arridigital.com and YouTube.

Reply | Threaded
Open this post in threaded view
|

Re: SAS RAID Controller of SunFire X4150 causes trouble

Stuart Henderson
On 2010-05-06, Schafhauser, Florian <[hidden email]> wrote:
> Hello,
>
> the RAID Controller causes trouble with OpenBSD 4.5 and 4.6.

First off, for mpi(4) you want one of these patches:

ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.5/common/015_mpi.patch
ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.6/common/009_mpi.patch
ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.7/common/002_mpi.patch

> Reading and writing is quite slow. When I use I/O intensive applications like
> squid, machine dies within next 30 minutes.

Are you sure about reading being slow? That speed seems about right
for write-cache being disabled on the volume.

http://old.nabble.com/Re%3A-HP-DL140-G3%2C-mpi%284%29-SAS1068-%28hotplug%29%2C-slow-disk-writes.-p17059402.html

> Only ping requests were answered.

Assuming you are running sshd: if you telnet to port 22 on that machine,
do you get something like:

Trying 11.22.33.44...
Connected to 11.22.33.44.
Escape character is '^]'.

(i.e. it answers the port, but no banner?)

If so, and you have a way to reliably reproduce the hang, please give
as many details as possible about what triggers it... Other people see
this hang but nobody I know of has a way to reproduce, it usually only
happens after the box has been running for a month or two.

Reply | Threaded
Open this post in threaded view
|

Re: SAS RAID Controller of SunFire X4150 causes trouble

J.C. Roberts-3
On Fri, 7 May 2010 09:35:06 +0000 (UTC) Stuart Henderson
<[hidden email]> wrote:

> On 2010-05-06, Schafhauser, Florian <[hidden email]> wrote:
> > Hello,
> >
> > the RAID Controller causes trouble with OpenBSD 4.5 and 4.6.
>
> First off, for mpi(4) you want one of these patches:
>
> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.5/common/015_mpi.patch
> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.6/common/009_mpi.patch
> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.7/common/002_mpi.patch


Also, if you decide to run -current to get all the newest mpi goodness,
the following was committed just a few hours ago:

On Sun, 9 May 2010 16:03:57 -0600 (MDT) David Gwynne
<dlg cvs.openbsd.org> wrote:

> CVSROOT: /cvs
> Module name: src
> Changes by: dlg cvs.openbsd.org 2010/05/09 16:03:57
>
> Modified files:
> sys/dev/ic     : mpi.c
>
> Log message:
> back out 1.143, it causes data corruption on the mpis in sun v20z
> boxes, but i suspect it is common to all SPI mpi parts.
>
> problem found and problem diff verified by landry.
>
> ok krw@ landry@ jasper@

I'm not sure when this will hit snapshots, but if you have a snap
between Apr 19 and now, then you should wait until a new snapshot has
been created including the above, or build your own.

        jcr

--
The OpenBSD Journal - http://www.undeadly.org

Reply | Threaded
Open this post in threaded view
|

Re: SAS RAID Controller of SunFire X4150 causes trouble

Stuart Henderson
On 2010/05/09 21:09, J.C. Roberts wrote:
> Also, if you decide to run -current to get all the newest mpi goodness,
> the following was committed just a few hours ago:

> On Sun, 9 May 2010 16:03:57 -0600 (MDT) David Gwynne
> <dlg cvs.openbsd.org> wrote:
> > back out 1.143, it causes data corruption on the mpis in sun v20z
> > boxes, but i suspect it is common to all SPI mpi parts.

SPI = SCSI Parallel Interface

don't worry about this for the X4150.

Reply | Threaded
Open this post in threaded view
|

Re: SAS RAID Controller of SunFire X4150 causes trouble

Schafhauser, Florian
In reply to this post by Stuart Henderson
Am 07.05.2010 11:35, schrieb Stuart Henderson:

> On 2010-05-06, Schafhauser, Florian <[hidden email]> wrote:
>> Hello,
>>
>> the RAID Controller causes trouble with OpenBSD 4.5 and 4.6.
>
> First off, for mpi(4) you want one of these patches:
>
> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.5/common/015_mpi.patch
> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.6/common/009_mpi.patch
> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.7/common/002_mpi.patch
>
>> Reading and writing is quite slow. When I use I/O intensive applications
like
>> squid, machine dies within next 30 minutes.

I applied the patch in this way:
cvsup -g -L2 /etc/cvsup
patch -p1 < 009_mpi.patch
rebuild the kernel
reboot

102400000 bytes transferred in 15.936 secs (6425378 bytes/sec)
102400000 bytes transferred in 16.173 secs (6331465 bytes/sec)
102400000 bytes transferred in 16.004 secs (6398081 bytes/sec)

Writing speed is still the same.

Which information do you need to analyze the problem?

Florian

# dmesg
OpenBSD 4.6-stable (FWNODE) #1: Mon May 10 11:59:56 CEST 2010
    [hidden email]:/usr/src/sys/arch/i386/compile/FWNODE
cpu0: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz ("GenuineIntel" 686-class) 2.33
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem  = 3757338624 (3583MB)
avail mem = 3648577536 (3479MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/03/09, BIOS32 rev. 0 @ 0xf0010,
SMBIOS rev. 2.4 @ 0xfccd0 (69 entries)
bios0: vendor American Megatrends Inc. version "1ADQW060" date 03/03/2009
bios0: Sun Microsystems SUN FIRE X4150
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR MCFG SSDT OEMB HPET TCPA SSDT EINJ BERT ERST
HEST
acpi0: wakeup devices SPE4(S1) SPE2(S1) SPE1(S5) P8PC(S5) P0P1(S1) UAR1(S5)
P0P5(S1) P0P6(S1) P0P7(S1) NPE4(S5) NPE5(S5) NPE6(S5) NPE7(S5) USB0(S1)
USB1(S1) USB2(S1) USB3(S1) EUSB(S1) BR1E(S5) OPH1(S5) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz ("GenuineIntel" 686-class) 2.33
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz ("GenuineIntel" 686-class) 2.33
GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz ("GenuineIntel" 686-class) 2.33
GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec80000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (NPE2)
acpiprt2 at acpi0: bus 2 (SPE4)
acpiprt3 at acpi0: bus -1 (SPE2)
acpiprt4 at acpi0: bus 3 (SPE1)
acpiprt5 at acpi0: bus 4 (P8PC)
acpiprt6 at acpi0: bus 15 (P0P1)
acpiprt7 at acpi0: bus -1 (P0P5)
acpiprt8 at acpi0: bus -1 (P0P6)
acpiprt9 at acpi0: bus -1 (P0P7)
acpiprt10 at acpi0: bus 7 (NPE4)
acpiprt11 at acpi0: bus 8 (NPE5)
acpiprt12 at acpi0: bus 9 (NPE6)
acpiprt13 at acpi0: bus 13 (NPE7)
acpiprt14 at acpi0: bus 14 (P0P4)
acpiprt15 at acpi0: bus 0 (BR1E)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0x6800 0xc6800/0x1000 0xc7800/0x1000 0xc8800/0x5c00
0xce800/0x1000 0xcf800/0x1000 0xd0800/0x1000 0xd1800/0x1000
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 2328 MHz: speeds: 2336, 2003 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000P Host" rev 0xb1
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0xb1
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 2
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 3
ppb3 at pci2 dev 2 function 0 "Intel 6321ESB PCIE" rev 0x01
pci4 at ppb3 bus 4
em0 at pci4 dev 0 function 0 "Intel PRO/1000 PT (80003ES2)" rev 0x01: apic 4
int 18 (irq 11), address 00:23:8b:41:ba:4e
em1 at pci4 dev 0 function 1 "Intel PRO/1000 PT (80003ES2)" rev 0x01: apic 4
int 19 (irq 5), address 00:23:8b:41:ba:4f
ppb4 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci5 at ppb4 bus 5
ppb5 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0xb1
pci6 at ppb5 bus 6
ppb6 at pci0 dev 4 function 0 "Intel 5000 PCIE x8" rev 0xb1
pci7 at ppb6 bus 7
mpi0 at pci7 dev 0 function 0 "Symbios Logic SAS1068E" rev 0x04: apic 4 int 17
(irq 11)
scsibus0 at mpi0: 112 targets
sd0 at scsibus0 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct
fixed
sd0: 69618MB, 512 bytes/sec, 142577664 sec total
ppb7 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0xb1
pci8 at ppb7 bus 8
ppb8 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0xb1
pci9 at ppb8 bus 9
ppb9 at pci9 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
pci10 at ppb9 bus 10
ppb10 at pci10 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
pci11 at ppb10 bus 11
em2 at pci11 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 4
int 17 (irq 11), address 00:15:17:a9:ad:9d
em3 at pci11 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 4
int 16 (irq 10), address 00:15:17:a9:ad:9c
ppb11 at pci10 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
pci12 at ppb11 bus 12
em4 at pci12 dev 0 function 0 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 4
int 19 (irq 5), address 00:15:17:a9:ad:9f
em5 at pci12 dev 0 function 1 "Intel PRO/1000 QP (82571EB)" rev 0x06: apic 4
int 18 (irq 11), address 00:15:17:a9:ad:9e
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0xb1
pci13 at ppb12 bus 13
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0xb1
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0xb1
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0xb1
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0xb1
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0xb1
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0xb1
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0xb1
ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09: apic 4 int 17
(irq 11)
pci14 at ppb13 bus 14
em6 at pci14 dev 0 function 0 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 4
int 16 (irq 10), address 00:23:8b:41:ba:50
em7 at pci14 dev 0 function 1 "Intel PRO/1000 PT (82571EB)" rev 0x06: apic 4
int 17 (irq 11), address 00:23:8b:41:ba:51
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 4 int 22
(irq 7)
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 4 int 23
(irq 6)
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 4 int 20
(irq 10)
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 4 int 21
(irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 4 int 22
(irq 7)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb14 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci15 at ppb14 bus 15
vga1 at pci15 dev 5 function 0 "ASPEED Technology AST2000" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 6321ESB AHCI" rev 0x09: apic 4 int 21
(irq 5), AHCI 1.1
scsibus1 at ahci0: 32 targets
ichiic0 at pci0 dev 31 function 3 "Intel 6321ESB SMBus" rev 0x09: apic 4 int
22 (irq 11)
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 1 configuration 1 interface 0 "Texas Instruments
Incorporated 6250 FW: 04.02.02.22.562AD423" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
cd0 at scsibus2 targ 1 lun 0: <TSSTcorp, CD/DVDW TS-T632A, SR03> SCSI0 5/cdrom
removable
uhub5 at uhub0 port 6 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 3
uhidev0 at uhub2 port 2 configuration 1 interface 0 "American Megatrends Inc.
Virtual Keyboard and Mouse" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 2 configuration 1 interface 1 "American Megatrends Inc.
Virtual Keyboard and Mouse" rev 1.10/1.00 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
softraid0 at root
root on sd0a swap on sd0b dump on sd0b



>
> Are you sure about reading being slow? That speed seems about right
> for write-cache being disabled on the volume.
>
>
<a href="http://old.nabble.com/Re%3A-HP-DL140-G3%2C-mpi%284%29-SAS1068-%28hotplug%29%2">http://old.nabble.com/Re%3A-HP-DL140-G3%2C-mpi%284%29-SAS1068-%28hotplug%29%2
C-slow-disk-writes.-p17059402.html

>
>> Only ping requests were answered.
>
> Assuming you are running sshd: if you telnet to port 22 on that machine,
> do you get something like:
>
> Trying 11.22.33.44...
> Connected to 11.22.33.44.
> Escape character is '^]'.
>
> (i.e. it answers the port, but no banner?)
>
> If so, and you have a way to reliably reproduce the hang, please give
> as many details as possible about what triggers it... Other people see
> this hang but nobody I know of has a way to reproduce, it usually only
> happens after the box has been running for a month or two.
>



Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: M|nchen  -  Registergericht: Amtsgericht M|nchen  -
Handelsregisternummer: HRA 57918
Persvnlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: M|nchen  -  Registergericht: Amtsgericht M|nchen  -
Handelsregisternummer: HRB 54477
Geschdftsf|hrer: Franz Kraus; Dr. Martin Prillmann

A new star is born - ALEXA the most versatile digital camera system.
Get all the latest information from arridigital.com and YouTube.

Reply | Threaded
Open this post in threaded view
|

Re: SAS RAID Controller of SunFire X4150 causes trouble

Stuart Henderson
On 2010-05-11, Schafhauser, Florian <[hidden email]> wrote:

> Am 07.05.2010 11:35, schrieb Stuart Henderson:
>> On 2010-05-06, Schafhauser, Florian <[hidden email]> wrote:
>>> Hello,
>>>
>>> the RAID Controller causes trouble with OpenBSD 4.5 and 4.6.
>>
>> First off, for mpi(4) you want one of these patches:
>>
>> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.5/common/015_mpi.patch
>> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.6/common/009_mpi.patch
>> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.7/common/002_mpi.patch
>>
>>> Reading and writing is quite slow. When I use I/O intensive applications
> like
>>> squid, machine dies within next 30 minutes.
>
> I applied the patch in this way:
> cvsup -g -L2 /etc/cvsup
> patch -p1 < 009_mpi.patch
> rebuild the kernel
> reboot
>
> 102400000 bytes transferred in 15.936 secs (6425378 bytes/sec)
> 102400000 bytes transferred in 16.173 secs (6331465 bytes/sec)
> 102400000 bytes transferred in 16.004 secs (6398081 bytes/sec)
>
> Writing speed is still the same.

This won't help writing speed but it would be very interesting to
know if it does anything to help with the freezes.



>> Are you sure about reading being slow? That speed seems about right
>> for write-cache being disabled on the volume.
>>
>>
> <a href="http://old.nabble.com/Re%3A-HP-DL140-G3%2C-mpi%284%29-SAS1068-%28hotplug%29%2">http://old.nabble.com/Re%3A-HP-DL140-G3%2C-mpi%284%29-SAS1068-%28hotplug%29%2
> C-slow-disk-writes.-p17059402.html

This (i.e. running the raid vendor's tool under linux and enabling
write-cache for the array) might help writing speed.

Reply | Threaded
Open this post in threaded view
|

Re: SAS RAID Controller of SunFire X4150 causes trouble

Stuart Henderson
Also: Do you run sensorsd on this system?


In gmane.os.openbsd.misc, I wrote:

> On 2010-05-11, Schafhauser, Florian <[hidden email]> wrote:
>> Am 07.05.2010 11:35, schrieb Stuart Henderson:
>>> On 2010-05-06, Schafhauser, Florian <[hidden email]> wrote:
>>>> Hello,
>>>>
>>>> the RAID Controller causes trouble with OpenBSD 4.5 and 4.6.
>>>
>>> First off, for mpi(4) you want one of these patches:
>>>
>>> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.5/common/015_mpi.patch
>>> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.6/common/009_mpi.patch
>>> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.7/common/002_mpi.patch
>>>
>>>> Reading and writing is quite slow. When I use I/O intensive applications
>> like
>>>> squid, machine dies within next 30 minutes.
>>
>> I applied the patch in this way:
>> cvsup -g -L2 /etc/cvsup
>> patch -p1 < 009_mpi.patch
>> rebuild the kernel
>> reboot
>>
>> 102400000 bytes transferred in 15.936 secs (6425378 bytes/sec)
>> 102400000 bytes transferred in 16.173 secs (6331465 bytes/sec)
>> 102400000 bytes transferred in 16.004 secs (6398081 bytes/sec)
>>
>> Writing speed is still the same.
>
> This won't help writing speed but it would be very interesting to
> know if it does anything to help with the freezes.
>
>
>
>>> Are you sure about reading being slow? That speed seems about right
>>> for write-cache being disabled on the volume.
>>>
>>>
>> <a href="http://old.nabble.com/Re%3A-HP-DL140-G3%2C-mpi%284%29-SAS1068-%28hotplug%29%2">http://old.nabble.com/Re%3A-HP-DL140-G3%2C-mpi%284%29-SAS1068-%28hotplug%29%2
>> C-slow-disk-writes.-p17059402.html
>
> This (i.e. running the raid vendor's tool under linux and enabling
> write-cache for the array) might help writing speed.

Reply | Threaded
Open this post in threaded view
|

Re: SAS RAID Controller of SunFire X4150 causes trouble

Schafhauser, Florian
Sensorsd is installed but not started.
# sysctl hw.sensors
hw.sensors.cpu0.temp0=37.00 degC
hw.sensors.mpi0.drive0=online (sd0), OK

How can I configure it to get helpful reports?

thanks

Florian
Am 13.05.2010 20:34, schrieb Stuart Henderson:

> Also: Do you run sensorsd on this system?
>
>
> In gmane.os.openbsd.misc, I wrote:
>> On 2010-05-11, Schafhauser, Florian <[hidden email]> wrote:
>>> Am 07.05.2010 11:35, schrieb Stuart Henderson:
>>>> On 2010-05-06, Schafhauser, Florian <[hidden email]> wrote:
>>>>> Hello,
>>>>>
>>>>> the RAID Controller causes trouble with OpenBSD 4.5 and 4.6.
>>>>
>>>> First off, for mpi(4) you want one of these patches:
>>>>
>>>> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.5/common/015_mpi.patch
>>>> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.6/common/009_mpi.patch
>>>> ftp://ftp.openbsd.org/pub/OpenBSD/patches/4.7/common/002_mpi.patch
>>>>
>>>>> Reading and writing is quite slow. When I use I/O intensive
applications

>>> like
>>>>> squid, machine dies within next 30 minutes.
>>>
>>> I applied the patch in this way:
>>> cvsup -g -L2 /etc/cvsup
>>> patch -p1 < 009_mpi.patch
>>> rebuild the kernel
>>> reboot
>>>
>>> 102400000 bytes transferred in 15.936 secs (6425378 bytes/sec)
>>> 102400000 bytes transferred in 16.173 secs (6331465 bytes/sec)
>>> 102400000 bytes transferred in 16.004 secs (6398081 bytes/sec)
>>>
>>> Writing speed is still the same.
>>
>> This won't help writing speed but it would be very interesting to
>> know if it does anything to help with the freezes.
>>
>>
>>
>>>> Are you sure about reading being slow? That speed seems about right
>>>> for write-cache being disabled on the volume.
>>>>
>>>>
>>>
<a href="http://old.nabble.com/Re%3A-HP-DL140-G3%2C-mpi%284%29-SAS1068-%28hotplug%29%2">http://old.nabble.com/Re%3A-HP-DL140-G3%2C-mpi%284%29-SAS1068-%28hotplug%29%2
>>> C-slow-disk-writes.-p17059402.html
>>
>> This (i.e. running the raid vendor's tool under linux and enabling
>> write-cache for the array) might help writing speed.
>>
>>

Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: M|nchen  -  Registergericht: Amtsgericht M|nchen  -
Handelsregisternummer: HRA 57918
Persvnlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: M|nchen  -  Registergericht: Amtsgericht M|nchen  -
Handelsregisternummer: HRB 54477
Geschdftsf|hrer: Franz Kraus; Dr. Martin Prillmann

A new star is born - ALEXA the most versatile digital camera system.
Get all the latest information from arridigital.com and YouTube.