Rock64 miniroot66.fs init: single user shell terminated, restarting

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Rock64 miniroot66.fs init: single user shell terminated, restarting

Sebastian Reitenbach
Seems the latest arm64 snapshot miniroot66.fs doesn't go into single user, first kernel that seem to broke is from: Sun Feb  2 02:14:44 MST 2020, last working from: Fri Jan 31 21:54:51 MST 2020

every second it writes:
init: single user shell terminated, restarting

miniroot66.fs retrieved from archive from https://ftp.hostserver.de/archive/

The output from last working miniroot66.fs:

Scanning mmc 1:1...
33543 bytes read in 8 ms (4 MiB/s)
Found EFI removable media binary efi/boot/bootaa64.efi
Scanning disk [hidden email]...
** Unrecognized filesystem type **
Card did not respond to voltage select!
Scanning disk [hidden email]...
Disk [hidden email] not ready
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
165151 bytes read in 14 ms (11.2 MiB/s)
disks: sd0*
>> OpenBSD/arm64 BOOTAA64 0.20
boot>
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 2233624+626496+8770856+741272 [181074+109+524304+202392]=0xff02f0
type 0x2 pa 0x200000 va 0x200000 pages 0x4000 attr 0x8
type 0x7 pa 0x4200000 va 0x4200000 pages 0x3ef4 attr 0x8
type 0x4 pa 0x80f4000 va 0x80f4000 pages 0x18 attr 0x8
type 0x7 pa 0x810c000 va 0x810c000 pages 0x740af attr 0x8
type 0x2 pa 0x7c1bb000 va 0x7c1bb000 pages 0xc2c attr 0x8
type 0x4 pa 0x7cde7000 va 0x7cde7000 pages 0x1 attr 0x8
type 0x2 pa 0x7cde8000 va 0x7cde8000 pages 0x3 attr 0x8
type 0x7 pa 0x7cdeb000 va 0x7cdeb000 pages 0x1 attr 0x8
type 0x2 pa 0x7cdec000 va 0x7cdec000 pages 0x100 attr 0x8
type 0x1 pa 0x7ceec000 va 0x7ceec000 pages 0x29 attr 0x8
type 0x0 pa 0x7cf15000 va 0x7cf15000 pages 0x5 attr 0x8
type 0x4 pa 0x7cf1a000 va 0x7cf1a000 pages 0x1 attr 0x8
type 0x6 pa 0x7cf1b000 va 0xa3863000 pages 0x1 attr 0x8000000000000008
type 0x4 pa 0x7cf1c000 va 0x7cf1c000 pages 0x2 attr 0x8
type 0x0 pa 0x7cf1e000 va 0x7cf1e000 pages 0x4 attr 0x8
type 0x4 pa 0x7cf22000 va 0x7cf22000 pages 0x2 attr 0x8
type 0x0 pa 0x7cf24000 va 0x7cf24000 pages 0x2 attr 0x8
type 0x6 pa 0x7cf26000 va 0xa386e000 pages 0x1 attr 0x8000000000000008
type 0x0 pa 0x7cf27000 va 0x7cf27000 pages 0x1 attr 0x8
type 0x2 pa 0x7cf28000 va 0x7cf28000 pages 0x3008 attr 0x8
type 0x5 pa 0x7ff30000 va 0xa6878000 pages 0x10 attr 0x8000000000000008
type 0x2 pa 0x7ff40000 va 0x7ff40000 pages 0xc0 attr 0x8
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2020 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 6.6-current (RAMDISK) #422: Fri Jan 31 21:54:51 MST 2020
    [hidden email]:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem  = 2079993856 (1983MB)
avail mem = 1983299584 (1891MB)
mainbus0 at root: Pine64 Rock64
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 256KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.8
efi0: Das U-Boot rev 0x20200100
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
syscon0 at mainbus0: "syscon"
"io-domains" at syscon0 not configured
"grf-gpio" at syscon0 not configured
"power-controller" at syscon0 not configured
"reboot-mode" at syscon0 not configured
rkclock0 at mainbus0
syscon1 at mainbus0: "syscon"
"usb2-phy" at syscon1 not configured
ampintc0 at mainbus0 nirq 160, ncpu 4: "interrupt-controller"
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
"opp_table0" at mainbus0 not configured
simplebus0 at mainbus0: "amba"
"dmac" at simplebus0 not configured
"arm-pmu" at mainbus0 not configured
"display-subsystem" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 24000 KHz
"xin24m" at mainbus0 not configured
"spdif" at mainbus0 not configured
com0 at mainbus0: ns16550, no working fifo
com0: console
rkiic0 at mainbus0
iic0 at rkiic0
rkpmic0 at iic0 addr 0x18: RK805
"spi" at mainbus0 not configured
"watchdog" at mainbus0 not configured
"thermal-zones" at mainbus0 not configured
"tsadc" at mainbus0 not configured
"efuse" at mainbus0 not configured
"gpu" at mainbus0 not configured
"vop" at mainbus0 not configured
"iommu" at mainbus0 not configured
"hdmi" at mainbus0 not configured
"phy" at mainbus0 not configured
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, mmc high-speed, dma
dwmmc1 at mainbus0: 50 MHz base clock
sdmmc1 at dwmmc1: 8-bit, mmc high-speed, dma
dwge0 at mainbus0: address 7a:ff:31:d6:7e:bb
rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
"usb" at mainbus0 not configured
ehci0 at mainbus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci0 at mainbus0: version 1.0
"external-gmac-clock" at mainbus0 not configured
"sdmmc-regulator" at mainbus0 not configured
"vcc-host-5v-regulator" at mainbus0 not configured
"vcc-host1-5v-regulator" at mainbus0 not configured
"vcc-sys" at mainbus0 not configured
"sound" at mainbus0 not configured
"spdif-dit" at mainbus0 not configured
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, EB1QT, 0030> removable
sd0: 30528MB, 512 bytes/sector, 62521344 sectors
sdmmc1: can't enable card
softraid0 at root
scsibus1 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on rd0a swap on rd0b dump on rd0b
WARNING: preposterous clock chip time
WARNING: CHECK AND RESET THE DATE!
erase ^?, werase ^W, kill ^U, intr ^C, status ^T

Welcome to the OpenBSD/arm64 6.6 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? s
#

And here the first one, that seems to be broken:
U-Boot TPL 2020.01 (Jan 12 2020 - 02:16:54)
LPDDR3, 800MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2020.01 (Jan 12 2020 - 02:16:54 -0700)
Trying to boot from MMC1
NOTICE:  BL31: v2.2(debug):2.2
NOTICE:  BL31: Built : 02:07:28, Jan 12 2020
ERROR:   over or zero region, nr=4187432, max=10
NOTICE:  BL31:Rockchip release version: v1.2
INFO:    ARM GICv2 driver initialized
INFO:    plat_rockchip_pmu_init: pd status 0xe
INFO:    BL31: Initializing runtime services
WARNING: BL31: cortex_a53: CPU workaround for 855873 was missing!
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2020.01 (Jan 12 2020 - 02:16:54 -0700)

Model: Pine64 Rock64
DRAM:  2 GiB
PMIC:  RK8050 (on=0x40, off=0x00)
MMC:   rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial@ff130000
Out:   serial@ff130000
Err:   serial@ff130000
Model: Pine64 Rock64
Net:   eth0: ethernet@ff540000
Hit any key to stop autoboot:  0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
33543 bytes read in 7 ms (4.6 MiB/s)
Found EFI removable media binary efi/boot/bootaa64.efi
Scanning disk [hidden email]...
** Unrecognized filesystem type **
Card did not respond to voltage select!
Scanning disk [hidden email]...
Disk [hidden email] not ready
Found 3 disks
BootOrder not defined
EFI boot manager: Cannot load any image
165151 bytes read in 13 ms (12.1 MiB/s)
disks: sd0*
>> OpenBSD/arm64 BOOTAA64 0.20
boot>
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 2237720+628992+8766760+742312 [181100+109+524184+202359]=0xfef680
type 0x2 pa 0x200000 va 0x200000 pages 0x4000 attr 0x8
type 0x7 pa 0x4200000 va 0x4200000 pages 0x3ef4 attr 0x8
type 0x4 pa 0x80f4000 va 0x80f4000 pages 0x18 attr 0x8
type 0x7 pa 0x810c000 va 0x810c000 pages 0x740af attr 0x8
type 0x2 pa 0x7c1bb000 va 0x7c1bb000 pages 0xc2c attr 0x8
type 0x4 pa 0x7cde7000 va 0x7cde7000 pages 0x1 attr 0x8
type 0x2 pa 0x7cde8000 va 0x7cde8000 pages 0x3 attr 0x8
type 0x7 pa 0x7cdeb000 va 0x7cdeb000 pages 0x1 attr 0x8
type 0x2 pa 0x7cdec000 va 0x7cdec000 pages 0x100 attr 0x8
type 0x1 pa 0x7ceec000 va 0x7ceec000 pages 0x29 attr 0x8
type 0x0 pa 0x7cf15000 va 0x7cf15000 pages 0x5 attr 0x8
type 0x4 pa 0x7cf1a000 va 0x7cf1a000 pages 0x1 attr 0x8
type 0x6 pa 0x7cf1b000 va 0xa3863000 pages 0x1 attr 0x8000000000000008
type 0x4 pa 0x7cf1c000 va 0x7cf1c000 pages 0x2 attr 0x8
type 0x0 pa 0x7cf1e000 va 0x7cf1e000 pages 0x4 attr 0x8
type 0x4 pa 0x7cf22000 va 0x7cf22000 pages 0x2 attr 0x8
type 0x0 pa 0x7cf24000 va 0x7cf24000 pages 0x2 attr 0x8
type 0x6 pa 0x7cf26000 va 0xa386e000 pages 0x1 attr 0x8000000000000008
type 0x0 pa 0x7cf27000 va 0x7cf27000 pages 0x1 attr 0x8
type 0x2 pa 0x7cf28000 va 0x7cf28000 pages 0x3008 attr 0x8
type 0x5 pa 0x7ff30000 va 0xa6878000 pages 0x10 attr 0x8000000000000008
type 0x2 pa 0x7ff40000 va 0x7ff40000 pages 0xc0 attr 0x8
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2020 OpenBSD. All rights reserved.  https://www.OpenBSD.org

OpenBSD 6.6-current (RAMDISK) #423: Sun Feb  2 02:14:44 MST 2020
    [hidden email]:/usr/src/sys/arch/arm64/compile/RAMDISK
real mem  = 2079993856 (1983MB)
avail mem = 1983303680 (1891MB)
mainbus0 at root: Pine64 Rock64
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
cpu0: 256KB 64b/line 16-way L2 cache
efi0 at mainbus0: UEFI 2.8
efi0: Das U-Boot rev 0x20200100
psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
syscon0 at mainbus0: "syscon"
"io-domains" at syscon0 not configured
"grf-gpio" at syscon0 not configured
"power-controller" at syscon0 not configured
"reboot-mode" at syscon0 not configured
rkclock0 at mainbus0
syscon1 at mainbus0: "syscon"
"usb2-phy" at syscon1 not configured
ampintc0 at mainbus0 nirq 160, ncpu 4: "interrupt-controller"
rkpinctrl0 at mainbus0: "pinctrl"
rkgpio0 at rkpinctrl0
rkgpio1 at rkpinctrl0
rkgpio2 at rkpinctrl0
rkgpio3 at rkpinctrl0
"opp_table0" at mainbus0 not configured
simplebus0 at mainbus0: "amba"
"dmac" at simplebus0 not configured
"arm-pmu" at mainbus0 not configured
"display-subsystem" at mainbus0 not configured
agtimer0 at mainbus0: tick rate 24000 KHz
"xin24m" at mainbus0 not configured
"spdif" at mainbus0 not configured
com0 at mainbus0: ns16550, no working fifo
com0: console
rkiic0 at mainbus0
iic0 at rkiic0
rkpmic0 at iic0 addr 0x18: RK805
"spi" at mainbus0 not configured
"watchdog" at mainbus0 not configured
"thermal-zones" at mainbus0 not configured
"tsadc" at mainbus0 not configured
"efuse" at mainbus0 not configured
"gpu" at mainbus0 not configured
"vop" at mainbus0 not configured
"iommu" at mainbus0 not configured
"hdmi" at mainbus0 not configured
"phy" at mainbus0 not configured
dwmmc0 at mainbus0: 50 MHz base clock
sdmmc0 at dwmmc0: 4-bit, sd high-speed, mmc high-speed, dma
dwmmc1 at mainbus0: 50 MHz base clock
sdmmc1 at dwmmc1: 8-bit, mmc high-speed, dma
dwge0 at mainbus0: address 7a:ff:31:d6:7e:bb
rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
"usb" at mainbus0 not configured
ehci0 at mainbus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
ohci0 at mainbus0: version 1.0
"external-gmac-clock" at mainbus0 not configured
"sdmmc-regulator" at mainbus0 not configured
"vcc-host-5v-regulator" at mainbus0 not configured
"vcc-host1-5v-regulator" at mainbus0 not configured
"vcc-sys" at mainbus0 not configured
"sound" at mainbus0 not configured
"spdif-dit" at mainbus0 not configured
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, EB1QT, 0030> removable
sd0: 30528MB, 512 bytes/sector, 62521344 sectors
sdmmc1: can't enable card
softraid0 at root
scsibus1 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on rd0a swap on rd0b dump on rd0b
WARNING: preposterous clock chip time
WARNING: CHECK AND RESET THE DATE!
init: single user shell terminated, restarting
init: single user shell terminated, restarting
init: single user shell terminated, restarting
init: single user shell terminated, restarting

Reply | Threaded
Open this post in threaded view
|

Re: Rock64 miniroot66.fs init: single user shell terminated, restarting

Kurt Miller-4
On Mon, 2020-02-03 at 21:39 +0100, Sebastian Reitenbach wrote:
> Seems the latest arm64 snapshot miniroot66.fs doesn't go into single user, first kernel that seem to broke is from:
> Sun Feb  2 02:14:44 MST 2020, last working from: Fri Jan 31 21:54:51 MST 2020
>
> every second it writes:
> init: single user shell terminated, restarting

Thanks for reporting this. It was fixed yesterday, the next
snapshot should contain the fix.

>
> miniroot66.fs retrieved from archive from https://ftp.hostserver.de/archive/
>
> The output from last working miniroot66.fs:
>
> Scanning mmc 1:1...
> 33543 bytes read in 8 ms (4 MiB/s)
> Found EFI removable media binary efi/boot/bootaa64.efi
> Scanning disk [hidden email]...
> ** Unrecognized filesystem type **
> Card did not respond to voltage select!
> Scanning disk [hidden email]...
> Disk [hidden email] not ready
> Found 3 disks
> BootOrder not defined
> EFI boot manager: Cannot load any image
> 165151 bytes read in 14 ms (11.2 MiB/s)
> disks: sd0*
> >
> > >
> > > OpenBSD/arm64 BOOTAA64 0.20
> boot> 
> cannot open sd0a:/etc/random.seed: No such file or directory
> booting sd0a:/bsd: 2233624+626496+8770856+741272 [181074+109+524304+202392]=0xff02f0
> type 0x2 pa 0x200000 va 0x200000 pages 0x4000 attr 0x8
> type 0x7 pa 0x4200000 va 0x4200000 pages 0x3ef4 attr 0x8
> type 0x4 pa 0x80f4000 va 0x80f4000 pages 0x18 attr 0x8
> type 0x7 pa 0x810c000 va 0x810c000 pages 0x740af attr 0x8
> type 0x2 pa 0x7c1bb000 va 0x7c1bb000 pages 0xc2c attr 0x8
> type 0x4 pa 0x7cde7000 va 0x7cde7000 pages 0x1 attr 0x8
> type 0x2 pa 0x7cde8000 va 0x7cde8000 pages 0x3 attr 0x8
> type 0x7 pa 0x7cdeb000 va 0x7cdeb000 pages 0x1 attr 0x8
> type 0x2 pa 0x7cdec000 va 0x7cdec000 pages 0x100 attr 0x8
> type 0x1 pa 0x7ceec000 va 0x7ceec000 pages 0x29 attr 0x8
> type 0x0 pa 0x7cf15000 va 0x7cf15000 pages 0x5 attr 0x8
> type 0x4 pa 0x7cf1a000 va 0x7cf1a000 pages 0x1 attr 0x8
> type 0x6 pa 0x7cf1b000 va 0xa3863000 pages 0x1 attr 0x8000000000000008
> type 0x4 pa 0x7cf1c000 va 0x7cf1c000 pages 0x2 attr 0x8
> type 0x0 pa 0x7cf1e000 va 0x7cf1e000 pages 0x4 attr 0x8
> type 0x4 pa 0x7cf22000 va 0x7cf22000 pages 0x2 attr 0x8
> type 0x0 pa 0x7cf24000 va 0x7cf24000 pages 0x2 attr 0x8
> type 0x6 pa 0x7cf26000 va 0xa386e000 pages 0x1 attr 0x8000000000000008
> type 0x0 pa 0x7cf27000 va 0x7cf27000 pages 0x1 attr 0x8
> type 0x2 pa 0x7cf28000 va 0x7cf28000 pages 0x3008 attr 0x8
> type 0x5 pa 0x7ff30000 va 0xa6878000 pages 0x10 attr 0x8000000000000008
> type 0x2 pa 0x7ff40000 va 0x7ff40000 pages 0xc0 attr 0x8
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>         The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2020 OpenBSD. All rights reserved.  https://www.OpenBSD.org
>
> OpenBSD 6.6-current (RAMDISK) #422: Fri Jan 31 21:54:51 MST 2020
>     [hidden email]:/usr/src/sys/arch/arm64/compile/RAMDISK
> real mem  = 2079993856 (1983MB)
> avail mem = 1983299584 (1891MB)
> mainbus0 at root: Pine64 Rock64
> cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
> cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
> cpu0: 256KB 64b/line 16-way L2 cache
> efi0 at mainbus0: UEFI 2.8
> efi0: Das U-Boot rev 0x20200100
> psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
> syscon0 at mainbus0: "syscon"
> "io-domains" at syscon0 not configured
> "grf-gpio" at syscon0 not configured
> "power-controller" at syscon0 not configured
> "reboot-mode" at syscon0 not configured
> rkclock0 at mainbus0
> syscon1 at mainbus0: "syscon"
> "usb2-phy" at syscon1 not configured
> ampintc0 at mainbus0 nirq 160, ncpu 4: "interrupt-controller"
> rkpinctrl0 at mainbus0: "pinctrl"
> rkgpio0 at rkpinctrl0
> rkgpio1 at rkpinctrl0
> rkgpio2 at rkpinctrl0
> rkgpio3 at rkpinctrl0
> "opp_table0" at mainbus0 not configured
> simplebus0 at mainbus0: "amba"
> "dmac" at simplebus0 not configured
> "arm-pmu" at mainbus0 not configured
> "display-subsystem" at mainbus0 not configured
> agtimer0 at mainbus0: tick rate 24000 KHz
> "xin24m" at mainbus0 not configured
> "spdif" at mainbus0 not configured
> com0 at mainbus0: ns16550, no working fifo
> com0: console
> rkiic0 at mainbus0
> iic0 at rkiic0
> rkpmic0 at iic0 addr 0x18: RK805
> "spi" at mainbus0 not configured
> "watchdog" at mainbus0 not configured
> "thermal-zones" at mainbus0 not configured
> "tsadc" at mainbus0 not configured
> "efuse" at mainbus0 not configured
> "gpu" at mainbus0 not configured
> "vop" at mainbus0 not configured
> "iommu" at mainbus0 not configured
> "hdmi" at mainbus0 not configured
> "phy" at mainbus0 not configured
> dwmmc0 at mainbus0: 50 MHz base clock
> sdmmc0 at dwmmc0: 4-bit, sd high-speed, mmc high-speed, dma
> dwmmc1 at mainbus0: 50 MHz base clock
> sdmmc1 at dwmmc1: 8-bit, mmc high-speed, dma
> dwge0 at mainbus0: address 7a:ff:31:d6:7e:bb
> rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
> "usb" at mainbus0 not configured
> ehci0 at mainbus0
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
> ohci0 at mainbus0: version 1.0
> "external-gmac-clock" at mainbus0 not configured
> "sdmmc-regulator" at mainbus0 not configured
> "vcc-host-5v-regulator" at mainbus0 not configured
> "vcc-host1-5v-regulator" at mainbus0 not configured
> "vcc-sys" at mainbus0 not configured
> "sound" at mainbus0 not configured
> "spdif-dit" at mainbus0 not configured
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
> scsibus0 at sdmmc0: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <SD/MMC, EB1QT, 0030> removable
> sd0: 30528MB, 512 bytes/sector, 62521344 sectors
> sdmmc1: can't enable card
> softraid0 at root
> scsibus1 at softraid0: 256 targets
> bootfile: sd0a:/bsd
> boot device: sd0
> root on rd0a swap on rd0b dump on rd0b
> WARNING: preposterous clock chip time
> WARNING: CHECK AND RESET THE DATE!
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
>
> Welcome to the OpenBSD/arm64 6.6 installation program.
> (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? s
> # 
>
> And here the first one, that seems to be broken:
> U-Boot TPL 2020.01 (Jan 12 2020 - 02:16:54)
> LPDDR3, 800MHz
> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
> Trying to boot from BOOTROM
> Returning to boot ROM...
>
> U-Boot SPL 2020.01 (Jan 12 2020 - 02:16:54 -0700)
> Trying to boot from MMC1
> NOTICE:  BL31: v2.2(debug):2.2
> NOTICE:  BL31: Built : 02:07:28, Jan 12 2020
> ERROR:   over or zero region, nr=4187432, max=10
> NOTICE:  BL31:Rockchip release version: v1.2
> INFO:    ARM GICv2 driver initialized
> INFO:    plat_rockchip_pmu_init: pd status 0xe
> INFO:    BL31: Initializing runtime services
> WARNING: BL31: cortex_a53: CPU workaround for 855873 was missing!
> INFO:    BL31: Preparing for EL3 exit to normal world
> INFO:    Entry point address = 0x200000
> INFO:    SPSR = 0x3c9
>
>
> U-Boot 2020.01 (Jan 12 2020 - 02:16:54 -0700)
>
> Model: Pine64 Rock64
> DRAM:  2 GiB
> PMIC:  RK8050 (on=0x40, off=0x00)
> MMC:   rksdmmc@ff500000: 1, rksdmmc@ff520000: 0
> Loading Environment from MMC... *** Warning - bad CRC, using default environment
>
> In:    serial@ff130000
> Out:   serial@ff130000
> Err:   serial@ff130000
> Model: Pine64 Rock64
> Net:   eth0: ethernet@ff540000
> Hit any key to stop autoboot:  0 
> Card did not respond to voltage select!
> switch to partitions #0, OK
> mmc1 is current device
> Scanning mmc 1:1...
> 33543 bytes read in 7 ms (4.6 MiB/s)
> Found EFI removable media binary efi/boot/bootaa64.efi
> Scanning disk [hidden email]...
> ** Unrecognized filesystem type **
> Card did not respond to voltage select!
> Scanning disk [hidden email]...
> Disk [hidden email] not ready
> Found 3 disks
> BootOrder not defined
> EFI boot manager: Cannot load any image
> 165151 bytes read in 13 ms (12.1 MiB/s)
> disks: sd0*
> >
> > >
> > > OpenBSD/arm64 BOOTAA64 0.20
> boot> 
> cannot open sd0a:/etc/random.seed: No such file or directory
> booting sd0a:/bsd: 2237720+628992+8766760+742312 [181100+109+524184+202359]=0xfef680
> type 0x2 pa 0x200000 va 0x200000 pages 0x4000 attr 0x8
> type 0x7 pa 0x4200000 va 0x4200000 pages 0x3ef4 attr 0x8
> type 0x4 pa 0x80f4000 va 0x80f4000 pages 0x18 attr 0x8
> type 0x7 pa 0x810c000 va 0x810c000 pages 0x740af attr 0x8
> type 0x2 pa 0x7c1bb000 va 0x7c1bb000 pages 0xc2c attr 0x8
> type 0x4 pa 0x7cde7000 va 0x7cde7000 pages 0x1 attr 0x8
> type 0x2 pa 0x7cde8000 va 0x7cde8000 pages 0x3 attr 0x8
> type 0x7 pa 0x7cdeb000 va 0x7cdeb000 pages 0x1 attr 0x8
> type 0x2 pa 0x7cdec000 va 0x7cdec000 pages 0x100 attr 0x8
> type 0x1 pa 0x7ceec000 va 0x7ceec000 pages 0x29 attr 0x8
> type 0x0 pa 0x7cf15000 va 0x7cf15000 pages 0x5 attr 0x8
> type 0x4 pa 0x7cf1a000 va 0x7cf1a000 pages 0x1 attr 0x8
> type 0x6 pa 0x7cf1b000 va 0xa3863000 pages 0x1 attr 0x8000000000000008
> type 0x4 pa 0x7cf1c000 va 0x7cf1c000 pages 0x2 attr 0x8
> type 0x0 pa 0x7cf1e000 va 0x7cf1e000 pages 0x4 attr 0x8
> type 0x4 pa 0x7cf22000 va 0x7cf22000 pages 0x2 attr 0x8
> type 0x0 pa 0x7cf24000 va 0x7cf24000 pages 0x2 attr 0x8
> type 0x6 pa 0x7cf26000 va 0xa386e000 pages 0x1 attr 0x8000000000000008
> type 0x0 pa 0x7cf27000 va 0x7cf27000 pages 0x1 attr 0x8
> type 0x2 pa 0x7cf28000 va 0x7cf28000 pages 0x3008 attr 0x8
> type 0x5 pa 0x7ff30000 va 0xa6878000 pages 0x10 attr 0x8000000000000008
> type 0x2 pa 0x7ff40000 va 0x7ff40000 pages 0xc0 attr 0x8
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>         The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2020 OpenBSD. All rights reserved.  https://www.OpenBSD.org
>
> OpenBSD 6.6-current (RAMDISK) #423: Sun Feb  2 02:14:44 MST 2020
>     [hidden email]:/usr/src/sys/arch/arm64/compile/RAMDISK
> real mem  = 2079993856 (1983MB)
> avail mem = 1983303680 (1891MB)
> mainbus0 at root: Pine64 Rock64
> cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
> cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache
> cpu0: 256KB 64b/line 16-way L2 cache
> efi0 at mainbus0: UEFI 2.8
> efi0: Das U-Boot rev 0x20200100
> psci0 at mainbus0: PSCI 1.1, SMCCC 1.1
> syscon0 at mainbus0: "syscon"
> "io-domains" at syscon0 not configured
> "grf-gpio" at syscon0 not configured
> "power-controller" at syscon0 not configured
> "reboot-mode" at syscon0 not configured
> rkclock0 at mainbus0
> syscon1 at mainbus0: "syscon"
> "usb2-phy" at syscon1 not configured
> ampintc0 at mainbus0 nirq 160, ncpu 4: "interrupt-controller"
> rkpinctrl0 at mainbus0: "pinctrl"
> rkgpio0 at rkpinctrl0
> rkgpio1 at rkpinctrl0
> rkgpio2 at rkpinctrl0
> rkgpio3 at rkpinctrl0
> "opp_table0" at mainbus0 not configured
> simplebus0 at mainbus0: "amba"
> "dmac" at simplebus0 not configured
> "arm-pmu" at mainbus0 not configured
> "display-subsystem" at mainbus0 not configured
> agtimer0 at mainbus0: tick rate 24000 KHz
> "xin24m" at mainbus0 not configured
> "spdif" at mainbus0 not configured
> com0 at mainbus0: ns16550, no working fifo
> com0: console
> rkiic0 at mainbus0
> iic0 at rkiic0
> rkpmic0 at iic0 addr 0x18: RK805
> "spi" at mainbus0 not configured
> "watchdog" at mainbus0 not configured
> "thermal-zones" at mainbus0 not configured
> "tsadc" at mainbus0 not configured
> "efuse" at mainbus0 not configured
> "gpu" at mainbus0 not configured
> "vop" at mainbus0 not configured
> "iommu" at mainbus0 not configured
> "hdmi" at mainbus0 not configured
> "phy" at mainbus0 not configured
> dwmmc0 at mainbus0: 50 MHz base clock
> sdmmc0 at dwmmc0: 4-bit, sd high-speed, mmc high-speed, dma
> dwmmc1 at mainbus0: 50 MHz base clock
> sdmmc1 at dwmmc1: 8-bit, mmc high-speed, dma
> dwge0 at mainbus0: address 7a:ff:31:d6:7e:bb
> rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6
> "usb" at mainbus0 not configured
> ehci0 at mainbus0
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1
> ohci0 at mainbus0: version 1.0
> "external-gmac-clock" at mainbus0 not configured
> "sdmmc-regulator" at mainbus0 not configured
> "vcc-host-5v-regulator" at mainbus0 not configured
> "vcc-host1-5v-regulator" at mainbus0 not configured
> "vcc-sys" at mainbus0 not configured
> "sound" at mainbus0 not configured
> "spdif-dit" at mainbus0 not configured
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1
> scsibus0 at sdmmc0: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <SD/MMC, EB1QT, 0030> removable
> sd0: 30528MB, 512 bytes/sector, 62521344 sectors
> sdmmc1: can't enable card
> softraid0 at root
> scsibus1 at softraid0: 256 targets
> bootfile: sd0a:/bsd
> boot device: sd0
> root on rd0a swap on rd0b dump on rd0b
> WARNING: preposterous clock chip time
> WARNING: CHECK AND RESET THE DATE!
> init: single user shell terminated, restarting
> init: single user shell terminated, restarting
> init: single user shell terminated, restarting
> init: single user shell terminated, restarting
>