Re: kernel/5105: ral0 causes panic

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Re: kernel/5105: ral0 causes panic

Alexander Hall
Forgot dmesg... A slightly newer kernel. Same panic.

$ cat /var/run/dmesg.boot

OpenBSD 3.9-current (GENERIC) #737: Fri May 12 19:59:49 MDT 2006
     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) III Mobile CPU 866MHz ("GenuineIntel"
686-class) 864 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 670474240 (654760K)
avail mem = 603369472 (589228K)
using 4256 buffers containing 33628160 bytes (32840K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 05/16/03, BIOS32 rev. 0 @
0xffe90, SMBIOS rev. 2.3 @ 0xf76b0 (61 entries)
bios0: Dell Computer Corporation Inspiron 4100
apm0 at bios0: Power Management spec V1.2
apm0: battery life expectancy 100%
apm0: AC on, battery charge high, charging, estimated 3:54 hours
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbb90/208 (11 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE"
rev 0x00)
pcibios0: PCI bus #4 is the last bus
bios0: ROM list: 0xc0000/0x10000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82830MP CPU-I/O-1" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82830MP CPU-AGP" rev 0x02
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x41
pci2 at ppb1 bus 2
xl0 at pci2 dev 0 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11,
address 00:06:5b:36:f8:e1
exphy0 at xl0 phy 24: 3Com internal media interface
cbb0 at pci2 dev 1 function 0 "Texas Instruments PCI1420 CardBus" rev
0x00: irq 11
cbb1 at pci2 dev 1 function 1 "Texas Instruments PCI1420 CardBus" rev
0x00: irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x01: SpeedStep
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23CA-30>
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x01: irq
11, ICH3 AC97
ac97: codec id 0x4352595b (Cirrus Logic CS4205 rev 3)
ac97: codec features mic channel, tone, simulated stereo, bass boost, 20
bit DAC, 18 bit ADC, SRS 3D
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x01 at pci0 dev 31 function 6 not configured
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
fd1 at fdc0 drive 1: density unknown
biomask ef65 netmask ef65 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
ral0 at cardbus1 dev 0 function 0 "Ralink Technology, Inc., RT2500,
802.11  CardBus Reference Card": irq 11, address 00:14:85:b8:4e:0b
ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted

Reply | Threaded
Open this post in threaded view
|

Re: kernel/5105: ral0 causes panic

Alexander Hall
The following reply was made to PR kernel/5105; it has been noted by GNATS.

From: Alexander Hall <[hidden email]>
To: [hidden email], [hidden email]
Cc:  
Subject: Re: kernel/5105: ral0 causes panic
Date: Mon, 15 May 2006 23:07:12 +0200

 Forgot dmesg... A slightly newer kernel. Same panic.
 
 $ cat /var/run/dmesg.boot
 
 OpenBSD 3.9-current (GENERIC) #737: Fri May 12 19:59:49 MDT 2006
      [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
 cpu0: Intel(R) Pentium(R) III Mobile CPU 866MHz ("GenuineIntel"
 686-class) 864 MHz
 cpu0:
 FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
 real mem  = 670474240 (654760K)
 avail mem = 603369472 (589228K)
 using 4256 buffers containing 33628160 bytes (32840K) of memory
 mainbus0 (root)
 bios0 at mainbus0: AT/286+(00) BIOS, date 05/16/03, BIOS32 rev. 0 @
 0xffe90, SMBIOS rev. 2.3 @ 0xf76b0 (61 entries)
 bios0: Dell Computer Corporation Inspiron 4100
 apm0 at bios0: Power Management spec V1.2
 apm0: battery life expectancy 100%
 apm0: AC on, battery charge high, charging, estimated 3:54 hours
 apm0: flags 30102 dobusy 0 doidle 1
 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfbb90/208 (11 entries)
 pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE"
 rev 0x00)
 pcibios0: PCI bus #4 is the last bus
 bios0: ROM list: 0xc0000/0x10000
 cpu0 at mainbus0
 pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
 pchb0 at pci0 dev 0 function 0 "Intel 82830MP CPU-I/O-1" rev 0x02
 ppb0 at pci0 dev 1 function 0 "Intel 82830MP CPU-AGP" rev 0x02
 pci1 at ppb0 bus 1
 vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M6 LY" rev 0x00
 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
 wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
 uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x01: irq 11
 usb0 at uhci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x41
 pci2 at ppb1 bus 2
 xl0 at pci2 dev 0 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 11,
 address 00:06:5b:36:f8:e1
 exphy0 at xl0 phy 24: 3Com internal media interface
 cbb0 at pci2 dev 1 function 0 "Texas Instruments PCI1420 CardBus" rev
 0x00: irq 11
 cbb1 at pci2 dev 1 function 1 "Texas Instruments PCI1420 CardBus" rev
 0x00: irq 11
 cardslot0 at cbb0 slot 0 flags 0
 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0x20
 pcmcia0 at cardslot0
 cardslot1 at cbb1 slot 1 flags 0
 cardbus1 at cardslot1: bus 4 device 0 cacheline 0x8, lattimer 0x20
 pcmcia1 at cardslot1
 ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x01: SpeedStep
 pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x01: DMA,
 channel 0 configured to compatibility, channel 1 configured to compatibility
 wd0 at pciide0 channel 0 drive 0: <HITACHI_DK23CA-30>
 wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
 wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
 pciide0: channel 1 ignored (disabled)
 auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x01: irq
 11, ICH3 AC97
 ac97: codec id 0x4352595b (Cirrus Logic CS4205 rev 3)
 ac97: codec features mic channel, tone, simulated stereo, bass boost, 20
 bit DAC, 18 bit ADC, SRS 3D
 audio0 at auich0
 "Intel 82801CA/CAM Modem" rev 0x01 at pci0 dev 31 function 6 not configured
 isa0 at ichpcib0
 isadma0 at isa0
 pckbc0 at isa0 port 0x60/5
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pms0 at pckbc0 (aux slot)
 pckbc0: using irq 12 for aux slot
 wsmouse0 at pms0 mux 0
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: <PC speaker>
 spkr0 at pcppi0
 lpt0 at isa0 port 0x378/4 irq 7
 npx0 at isa0 port 0xf0/16: using exception 16
 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
 pccom0: console
 pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
 fd1 at fdc0 drive 1: density unknown
 biomask ef65 netmask ef65 ttymask ffe7
 pctr: 686-class user-level performance counters enabled
 mtrr: Pentium Pro MTRR support
 ral0 at cardbus1 dev 0 function 0 "Ralink Technology, Inc., RT2500,
 802.11  CardBus Reference Card": irq 11, address 00:14:85:b8:4e:0b
 ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525
 dkcsum: wd0 matches BIOS drive 0x80
 root on wd0a
 rootdev=0x0 rrootdev=0x300 rawdev=0x302
 WARNING: / was not properly unmounted

Reply | Threaded
Open this post in threaded view
|

Re: kernel/5105: ral0 causes panic

Alexander Hall
In reply to this post by Alexander Hall
The following reply was made to PR kernel/5105; it has been noted by GNATS.

From: Alexander Hall <[hidden email]>
To: [hidden email]
Cc:  
Subject: Re: kernel/5105: ral0 causes panic
Date: Sun, 21 May 2006 16:19:47 +0200

 --WORKAROUND--
 
 Forcing 11b mode ("media autoselect mode 11b") makes the panics not appear.