Re: SGI Indy DHCP problems since 5.6 and still in 6.0-current

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Re: SGI Indy DHCP problems since 5.6 and still in 6.0-current

Frank Scheiner
Many thanks for the patch!

As expected this also solves the RARP issues. Just booted my R4400 based
Indy with OpenBSD 6.0 with a patched kernel and it works like a charm now:

```
 >> bootp():AC100243.bootecoff bootp():AC100243.bsd.IP22
Setting $netaddr to 172.16.2.67 (from server )
Obtaining AC100243.bootecoff from server
37920+192+2592 entry: 0x880020f0

OpenBSD/sgi-IP22 ARCBios boot version 1.6
arg 0: bootp():AC100243.bootecoff
arg 1: bootp():AC100243.bsd.IP22
arg 2: ConsoleIn=serial(0)
arg 3: ConsoleOut=serial(0)
arg 4: SystemPartition=bootp():
arg 5: OSLoader=sash
arg 6: OSLoadPartition=bootp():
arg 7: OSLoadFilename=/bsd
Boot: bootp():AC100243.bsd.IP22
cannot open /etc/random.seed: Device not configured
Setting $netaddr to 172.16.2.67 (from server )
Obtaining AC100243.bsd.IP22 from server
Setting $netaddr to 172.16.2.67 (from server )
Obtaining AC100243.bsd.IP22 from server
3535496+964664Setting $netaddr to 172.16.2.67 (from server )
Obtaining AC100243.bsd.IP22 from server
  [78+240696+142363]=0x4a8628
ARCS32 Firmware Version 1.10
Found SGI-IP22, setting up.
Initial setup done, switching console.
[ using 383848 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
         The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 6.0 (GENERIC-IP22) #0: Fri Mar 10 20:11:50 CET 2017
     [hidden email]:/sd2a/6.0/src/sys/arch/sgi/compile/GENERIC-IP22
real mem = 201326592 (192MB)
rsvd mem = 802816 (1MB)
avail mem = 193511424 (184MB)
warning: no entropy supplied by boot loader
mainbus0 at root: Indy
cpu0 at mainbus0: MIPS R4400 CPU rev 3.0 150 MHz, R4010 FPC rev 0.0
cpu0: cache L1-I 16KB D 16KB direct, L2 1024KB direct
int0 at mainbus0 addr 0x1fbd9880
imc0 at mainbus0: revision 3
gio0 at imc0
hpc0 at gio0 addr 0x1fb80000: SGI HPC3 (onboard)
zs0 at hpc0 offset 0x00059830 irq 29: 85230
zstty0 at zs0 channel 1: console
zstty1 at zs0 channel 0
pckbc0 at hpc0 offset 0x00059840 irq 28
sq0 at hpc0 offset 0x00054000 irq 3: Seeq 80c03, address 08:00:69:11:22:33
wdsc0 at hpc0 offset 0x00044000 irq 1: WD33C93B, 20.0 MHz, burst DMA
wdsc0: microcode revision 0x0d, fast SCSI
scsibus0 at wdsc0: 8 targets, initiator 0
haltwo at hpc0 offset 0x00058000 irq 12 not configured
pione at hpc0 offset 0x00059800 irq 5 not configured
panel0 at hpc0 offset 0x00059850 irq 9: power and volume buttons
dsclock0 at hpc0 offset 0x00060000
clock0 at mainbus0: int 5
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
boot device: sq0
nfs_boot: using interface sq0, with revarp & bootparams
nfs_boot: client_addr=172.16.2.67
nfs_boot: server_addr=172.16.0.1 hostname=indy
root on 172.16.0.9:/srv/nfs/indy/root
swap on 172.16.0.9:/srv/nfs/indy/swap
Automatic boot in progress: starting file system checks.
setting tty flags
pf enabled
starting network
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
swapctl: adding 172.16.0.9:/srv/nfs/openbsd/6.0/sgi/indy/swap as swap
device at priority 0
savecore: no core dump (no dumpdev)
checking quotas: done.
clearing /tmp
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Fri Mar 10 13:04:28 MST 2017

OpenBSD/sgi (indy.domain.tld) (console)

login:
```