Raspberry Pi 3B UEFI Install

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Raspberry Pi 3B UEFI Install

Archimedes Gaviola
Hi,

With the same procedures in Raspberry Pi 4B UEFI installation and using the
https://github.com/pftf/RPi3/releases/tag/v1.29 firmware, Raspberry Pi 3B
can now be also installed without a serial console adapter. Just type "set
tty fb0" upon boot-up loading the kernel image. However the problem is in
the USB keyboard as it freezes after the kernel has been loaded
which you can't proceed (it's almost there).

UEFI firmware version: v1.29
Modes: Device Tree or ACPI+Device Tree
OpenBSD image snapshot: Sept 1, 2020 (OpenBSD 6.8-BETA)

The config.txt should have the line (in my case due to Dell monitor display)
hdmi_safe=1

Please see screenshots for your reference.

https://i.postimg.cc/5yZVSmMg/IMG-7074.jpg
https://i.postimg.cc/T1yxb4Bh/IMG-7075.jpg
https://i.postimg.cc/QMXrmtv2/IMG-7076.jpg
https://i.postimg.cc/CMtS0wf8/IMG-7081.jpg
https://i.postimg.cc/T3j6nmNj/IMG-7083.jpg
https://i.postimg.cc/Dw3hW56y/IMG-7085.jpg

Thanks and best regards,
Archimedes