Random reboot PRC H330 raid controller Openbsd6.5

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Random reboot PRC H330 raid controller Openbsd6.5

Mohamed LAROUCI
Hi Folks,

I'd like to share our experience/troubles 🙂 that we are experiencing
with 4 PowerEdge R230 for few months.

Our servers are running Openbsd 6.5 OS and we have had several system
freezes (where only a hard reboot fixed the problem).

We identified the source of theses freezes, so that every time the
servers hanged, we find the error below in the Raid H330 logs.

"Assertion failure in ../../raid/mpthostcmd.c at line 656:MonTask: line
656 in file ../../raid/mpthostcmd.c Invader: sp=c00ae118 online reset -
no input needed_esram_initial_code:c02264d0 _io_path_code_start:c0233880
_io_path_code_end:c025fdd4

C0:online reset - wait for Reset to occur

montask 1

_MonTask: Online Controller Reset"

Has anyone run  into the same problem ?

I'm wondering, if a replace both disk and raid controllers by new ones.

Thank you for your feedbacks.

Server: PE R230

Raid Controller: H330

Disk: Toshiba DT01ACA0 - 500G SATA

You can find a dmeg output below.

Best regards,
Mohamed Larouci.

   ~# dmesg
OpenBSD 6.5 (GENERIC.MP) #1: Mon May 27 18:27:59 CEST 2019
     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4100808704 (3910MB)
avail mem = 3966902272 (3783MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x8ef68000 (43 entries)
bios0: vendor Dell Inc. version "2.6.1" date 12/06/2018
bios0: Dell Inc. PowerEdge R230
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP SSDT TPM2 BOOT SSDT SLIC HPET LPIT APIC MCFG
WDAT SSDT DBGP DBG2 SSDT SSDT SSDT SSDT SSDT SSDT PRAD HEST BERT ERST
EINJ DMAR FPDT
acpi0: wakeup devices PEGP(S0) PEG0(S0) PEGP(S0) PEG1(S0) PEGP(S0)
PEG2(S0) XHC_(S0) XDCI(S0) PXSX(S0) RP01(S0) PXSX(S0) RP02(S0)
PXSX(S0) RP03(S0) PXSX(S0) RP04(S0) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3692.78 MHz, 06-9e-09
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.35 MHz, 06-9e-09
cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 2, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.35 MHz, 06-9e-09
cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt0: no apic found for irq 32
acpiprt0: no apic found for irq 33
acpiprt0: no apic found for irq 34
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus 2 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus -1 (RP04)
acpiprt8 at acpi0: bus -1 (RP05)
acpiprt9 at acpi0: bus -1 (RP06)
acpiprt10 at acpi0: bus -1 (RP07)
acpiprt11 at acpi0: bus -1 (RP08)
acpiprt12 at acpi0: bus 3 (RP09)
acpiprt13 at acpi0: bus -1 (RP10)
acpiprt14 at acpi0: bus 4 (RP11)
acpiprt15 at acpi0: bus -1 (RP12)
acpiprt16 at acpi0: bus -1 (RP13)
acpiprt17 at acpi0: bus -1 (RP14)
acpiprt18 at acpi0: bus -1 (RP15)
acpiprt19 at acpi0: bus -1 (RP16)
acpiprt20 at acpi0: bus -1 (RP17)
acpiprt21 at acpi0: bus -1 (RP18)
acpiprt22 at acpi0: bus -1 (RP19)
acpiprt23 at acpi0: bus -1 (RP20)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
acpicpu4 at acpi0: C1(@1 halt!)
acpicpu5 at acpi0: C1(@1 halt!)
acpicpu6 at acpi0: C1(@1 halt!)
acpicpu7 at acpi0: C1(@1 halt!)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
"PNP0C33" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
ipmi at mainbus0 not configured
cpu0: using VERW MDS workaround
memory map conflict 0xe00fd000/0x1000
memory map conflict 0xfe000000/0x11000
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v6/7 Host" rev 0x05
ppb0 at pci0 dev 1 function 0 "Intel Core 6G PCIE" rev 0x05: msi
pci1 at ppb0 bus 1
mfii0 at pci1 dev 0 function 0 "Symbios Logic MegaRAID SAS3008" rev 0x02: msi
mfii0: "PERC H330 Adapter", firmware 25.5.5.0005
scsibus1 at mfii0: 32 targets
scsibus2 at mfii0: 256 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, TOSHIBA DT01ACA0, A810> SCSI4
0/direct fixed naa.5000039fd2e5488f
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
sd1 at scsibus2 targ 1 lun 0: <ATA, TOSHIBA DT01ACA0, A810> SCSI4
0/direct fixed naa.5000039fd2e51fc5
sd1: 476940MB, 512 bytes/sector, 976773168 sectors
ppb1 at pci0 dev 1 function 1 "Intel Core 6G PCIE" rev 0x05: msi
pci2 at ppb1 bus 2
ix0 at pci2 dev 0 function 0 "Intel 82599" rev 0x01: msi, address
90:e2:ba:7d:00:94
ix1 at pci2 dev 0 function 1 "Intel 82599" rev 0x01: msi, address
90:e2:ba:7d:00:95
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
"Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
"Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 1 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi,
AHCI 1.3.1
scsibus3 at ahci0: 32 targets
ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 3
3:0:0: mem address conflict 0xfffc0000/0x40000
3:0:1: mem address conflict 0xfffc0000/0x40000
bge0 at pci3 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0
(0x5720000), APE firmware NCSI 1.5.1.0: msi, address 50:9a:4c:7f:93:eb
brgphy0 at bge0 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0
bge1 at pci3 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0
(0x5720000), APE firmware NCSI 1.5.1.0: msi, address 50:9a:4c:7f:93:ec
brgphy1 at bge1 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 29 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
pci6 at ppb5 bus 6
ppb6 at pci6 dev 0 function 0 "Renesas SH7758 PCIE-PCI" rev 0x00
pci7 at ppb6 bus 7
vga1 at pci7 dev 0 function 0 "Matrox MGA G200eR" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel C236 LPC" rev 0x31
"Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31:
apic 2 int 16
iic0 at ichiic0
sdtemp0 at iic0 addr 0x19: stts2004
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhub1 at uhub0 port 3 configuration 1 interface 0 "no manufacturer
Gadget USB HUB" rev 2.00/0.00 addr 2
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent
Keyboard/Mouse Function" rev 2.00/0.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent
Keyboard/Mouse Function" rev 2.00/0.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub1 port 1 configuration 1 interface 2 "Avocent
Keyboard/Mouse Function" rev 2.00/0.00 addr 3
uhidev2: iclass 3/1
ums1 at uhidev2: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
ukbd0: was console keyboard
wskbd0 detached
ukbd0 detached
uhidev0 detached
wsmouse0 detached
ums0 detached
uhidev1 detached
wsmouse1 detached
ums1 detached
uhidev2 detached
root on sd0a (88f3411986a4bef8.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent
Keyboard/Mouse Function" rev 2.00/0.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent
Keyboard/Mouse Function" rev 2.00/0.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev2 at uhub1 port 1 configuration 1 interface 2 "Avocent
Keyboard/Mouse Function" rev 2.00/0.00 addr 3
uhidev2: iclass 3/1
ums1 at uhidev2: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
carp0: state transition: BACKUP -> MASTER
carp1: state transition: BACKUP -> MASTER
carp10: state transition: BACKUP -> MASTER
carp11: state transition: BACKUP -> MASTER
carp12: state transition: BACKUP -> MASTER
carp13: state transition: BACKUP -> MASTER
carp14: state transition: BACKUP -> MASTER
carp15: state transition: BACKUP -> MASTER
carp16: state transition: BACKUP -> MASTER
carp19: state transition: BACKUP -> MASTER
carp21: state transition: BACKUP -> MASTER
carp22: state transition: BACKUP -> MASTER
carp23: state transition: BACKUP -> MASTER
carp24: state transition: BACKUP -> MASTER
carp27: state transition: BACKUP -> MASTER
carp7: state transition: BACKUP -> MASTER
carp28: state transition: BACKUP -> MASTER
carp29: state transition: BACKUP -> MASTER
carp30: state transition: BACKUP -> MASTER
carp31: state transition: BACKUP -> MASTER
carp34: state transition: BACKUP -> MASTER
carp36: state transition: BACKUP -> MASTER
carp38: state transition: BACKUP -> MASTER
carp39: state transition: BACKUP -> MASTER
carp40: state transition: BACKUP -> MASTER
carp41: state transition: BACKUP -> MASTER
carp42: state transition: BACKUP -> MASTER
carp5: state transition: BACKUP -> MASTER
ukbd0: was console keyboard
wskbd0 detached
ukbd0 detached
uhidev0 detached
wsmouse0 detached
ums0 detached
uhidev1 detached
wsmouse1 detached
ums1 detached
uhidev2 detached

Reply | Threaded
Open this post in threaded view
|

Re: Random reboot PRC H330 raid controller Openbsd6.5

xpetrl
Hi,

We have the same server running FreeBSD but the Perc card is configured
to pass through (ZFS). No problem so far, uptime 145 days.

>
> We identified the source of theses freezes, so that every time the
> servers hanged, we find the error below in the Raid H330 logs.
>
> "Assertion failure in ../../raid/mpthostcmd.c at line 656:MonTask: line
> 656 in file ../../raid/mpthostcmd.c Invader: sp=c00ae118 online reset -
> no input needed_esram_initial_code:c02264d0 _io_path_code_start:c0233880
> _io_path_code_end:c025fdd4
>
> C0:online reset - wait for Reset to occur
>
> montask 1
>
> _MonTask: Online Controller Reset"
>
> Has anyone run?? into the same problem ?

May it be an issue with the RAM?

In our case, before installing the sever in the datacenter, we tested
all HDD via burn-in (in github) and 1 week of memtest86.

>
> I'm wondering, if a replace both disk and raid controllers by new ones.
>
> Thank you for your feedbacks.
>
> Server: PE R230
>
> Raid Controller: H330
>
> Disk: Toshiba DT01ACA0 - 500G SATA
>
> You can find a dmeg output below.
>
> Best regards,
> Mohamed Larouci.
>
>  ?? ~# dmesg
> OpenBSD 6.5 (GENERIC.MP) #1: Mon May 27 18:27:59 CEST 2019
>      
> [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>
> real mem = 4100808704 (3910MB)
> avail mem = 3966902272 (3783MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x8ef68000 (43 entries)
> bios0: vendor Dell Inc. version "2.6.1" date 12/06/2018
> bios0: Dell Inc. PowerEdge R230
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S5
> acpi0: tables DSDT FACP SSDT TPM2 BOOT SSDT SLIC HPET LPIT APIC MCFG
> WDAT SSDT DBGP DBG2 SSDT SSDT SSDT SSDT SSDT SSDT PRAD HEST BERT ERST
> EINJ DMAR FPDT
> acpi0: wakeup devices PEGP(S0) PEG0(S0) PEGP(S0) PEG1(S0) PEGP(S0)
> PEG2(S0) XHC_(S0) XDCI(S0) PXSX(S0) RP01(S0) PXSX(S0) RP02(S0)
> PXSX(S0) RP03(S0) PXSX(S0) RP04(S0) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 23999999 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3692.78 MHz, 06-9e-09
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 23MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> cpu4 at mainbus0: apid 1 (application processor)
> cpu4: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
> cpu4:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>
> cpu4: 256KB 64b/line 8-way L2 cache
> cpu4: smt 1, core 0, package 0
> cpu5 at mainbus0: apid 3 (application processor)
> cpu5: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.35 MHz, 06-9e-09
> cpu5:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>
> cpu5: 256KB 64b/line 8-way L2 cache
> cpu5: smt 1, core 1, package 0
> cpu6 at mainbus0: apid 5 (application processor)
> cpu6: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
> cpu6:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>
> cpu6: 256KB 64b/line 8-way L2 cache
> cpu6: smt 1, core 2, package 0
> cpu7 at mainbus0: apid 7 (application processor)
> cpu7: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.35 MHz, 06-9e-09
> cpu7:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>
> cpu7: 256KB 64b/line 8-way L2 cache
> cpu7: smt 1, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt0: no apic found for irq 32
> acpiprt0: no apic found for irq 33
> acpiprt0: no apic found for irq 34
> acpiprt1 at acpi0: bus 1 (PEG0)
> acpiprt2 at acpi0: bus 2 (PEG1)
> acpiprt3 at acpi0: bus -1 (PEG2)
> acpiprt4 at acpi0: bus -1 (RP01)
> acpiprt5 at acpi0: bus -1 (RP02)
> acpiprt6 at acpi0: bus -1 (RP03)
> acpiprt7 at acpi0: bus -1 (RP04)
> acpiprt8 at acpi0: bus -1 (RP05)
> acpiprt9 at acpi0: bus -1 (RP06)
> acpiprt10 at acpi0: bus -1 (RP07)
> acpiprt11 at acpi0: bus -1 (RP08)
> acpiprt12 at acpi0: bus 3 (RP09)
> acpiprt13 at acpi0: bus -1 (RP10)
> acpiprt14 at acpi0: bus 4 (RP11)
> acpiprt15 at acpi0: bus -1 (RP12)
> acpiprt16 at acpi0: bus -1 (RP13)
> acpiprt17 at acpi0: bus -1 (RP14)
> acpiprt18 at acpi0: bus -1 (RP15)
> acpiprt19 at acpi0: bus -1 (RP16)
> acpiprt20 at acpi0: bus -1 (RP17)
> acpiprt21 at acpi0: bus -1 (RP18)
> acpiprt22 at acpi0: bus -1 (RP19)
> acpiprt23 at acpi0: bus -1 (RP20)
> acpicpu0 at acpi0: C1(@1 halt!)
> acpicpu1 at acpi0: C1(@1 halt!)
> acpicpu2 at acpi0: C1(@1 halt!)
> acpicpu3 at acpi0: C1(@1 halt!)
> acpicpu4 at acpi0: C1(@1 halt!)
> acpicpu5 at acpi0: C1(@1 halt!)
> acpicpu6 at acpi0: C1(@1 halt!)
> acpicpu7 at acpi0: C1(@1 halt!)
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> acpicmos0 at acpi0
> acpibtn0 at acpi0: SLPB
> "PNP0C14" at acpi0 not configured
> "PNP0C33" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> ipmi at mainbus0 not configured
> cpu0: using VERW MDS workaround
> memory map conflict 0xe00fd000/0x1000
> memory map conflict 0xfe000000/0x11000
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v6/7 Host" rev 0x05
> ppb0 at pci0 dev 1 function 0 "Intel Core 6G PCIE" rev 0x05: msi
> pci1 at ppb0 bus 1
> mfii0 at pci1 dev 0 function 0 "Symbios Logic MegaRAID SAS3008" rev
> 0x02: msi
> mfii0: "PERC H330 Adapter", firmware 25.5.5.0005
> scsibus1 at mfii0: 32 targets
> scsibus2 at mfii0: 256 targets
> sd0 at scsibus2 targ 0 lun 0: <ATA, TOSHIBA DT01ACA0, A810> SCSI4
> 0/direct fixed naa.5000039fd2e5488f
> sd0: 476940MB, 512 bytes/sector, 976773168 sectors
> sd1 at scsibus2 targ 1 lun 0: <ATA, TOSHIBA DT01ACA0, A810> SCSI4
> 0/direct fixed naa.5000039fd2e51fc5
> sd1: 476940MB, 512 bytes/sector, 976773168 sectors
> ppb1 at pci0 dev 1 function 1 "Intel Core 6G PCIE" rev 0x05: msi
> pci2 at ppb1 bus 2
> ix0 at pci2 dev 0 function 0 "Intel 82599" rev 0x01: msi, address
> 90:e2:ba:7d:00:94
> ix1 at pci2 dev 0 function 1 "Intel 82599" rev 0x01: msi, address
> 90:e2:ba:7d:00:95
> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi,
> xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
> "Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
> "Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 1 not configured
> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi,
> AHCI 1.3.1
> scsibus3 at ahci0: 32 targets
> ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
> pci3 at ppb2 bus 3
> 3:0:0: mem address conflict 0xfffc0000/0x40000
> 3:0:1: mem address conflict 0xfffc0000/0x40000
> bge0 at pci3 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0
> (0x5720000), APE firmware NCSI 1.5.1.0: msi, address 50:9a:4c:7f:93:eb
> brgphy0 at bge0 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0
> bge1 at pci3 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0
> (0x5720000), APE firmware NCSI 1.5.1.0: msi, address 50:9a:4c:7f:93:ec
> brgphy1 at bge1 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0
> ppb3 at pci0 dev 29 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
> pci5 at ppb4 bus 5
> ppb5 at pci5 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
> pci6 at ppb5 bus 6
> ppb6 at pci6 dev 0 function 0 "Renesas SH7758 PCIE-PCI" rev 0x00
> pci7 at ppb6 bus 7
> vga1 at pci7 dev 0 function 0 "Matrox MGA G200eR" rev 0x01
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 31 function 0 "Intel C236 LPC" rev 0x31
> "Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31:
> apic 2 int 16
> iic0 at ichiic0
> sdtemp0 at iic0 addr 0x19: stts2004
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> uhub1 at uhub0 port 3 configuration 1 interface 0 "no manufacturer
> Gadget USB HUB" rev 2.00/0.00 addr 2
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent
> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent
> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
> uhidev1: iclass 3/1
> ums0 at uhidev1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhidev2 at uhub1 port 1 configuration 1 interface 2 "Avocent
> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
> uhidev2: iclass 3/1
> ums1 at uhidev2: 3 buttons, Z dir
> wsmouse1 at ums1 mux 0
> vscsi0 at root
> scsibus4 at vscsi0: 256 targets
> softraid0 at root
> scsibus5 at softraid0: 256 targets
> ukbd0: was console keyboard
> wskbd0 detached
> ukbd0 detached
> uhidev0 detached
> wsmouse0 detached
> ums0 detached
> uhidev1 detached
> wsmouse1 detached
> ums1 detached
> uhidev2 detached
> root on sd0a (88f3411986a4bef8.a) swap on sd0b dump on sd0b
> WARNING: / was not properly unmounted
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent
> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent
> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
> uhidev1: iclass 3/1
> ums0 at uhidev1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhidev2 at uhub1 port 1 configuration 1 interface 2 "Avocent
> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
> uhidev2: iclass 3/1
> ums1 at uhidev2: 3 buttons, Z dir
> wsmouse1 at ums1 mux 0
> carp0: state transition: BACKUP -> MASTER
> carp1: state transition: BACKUP -> MASTER
> carp10: state transition: BACKUP -> MASTER
> carp11: state transition: BACKUP -> MASTER
> carp12: state transition: BACKUP -> MASTER
> carp13: state transition: BACKUP -> MASTER
> carp14: state transition: BACKUP -> MASTER
> carp15: state transition: BACKUP -> MASTER
> carp16: state transition: BACKUP -> MASTER
> carp19: state transition: BACKUP -> MASTER
> carp21: state transition: BACKUP -> MASTER
> carp22: state transition: BACKUP -> MASTER
> carp23: state transition: BACKUP -> MASTER
> carp24: state transition: BACKUP -> MASTER
> carp27: state transition: BACKUP -> MASTER
> carp7: state transition: BACKUP -> MASTER
> carp28: state transition: BACKUP -> MASTER
> carp29: state transition: BACKUP -> MASTER
> carp30: state transition: BACKUP -> MASTER
> carp31: state transition: BACKUP -> MASTER
> carp34: state transition: BACKUP -> MASTER
> carp36: state transition: BACKUP -> MASTER
> carp38: state transition: BACKUP -> MASTER
> carp39: state transition: BACKUP -> MASTER
> carp40: state transition: BACKUP -> MASTER
> carp41: state transition: BACKUP -> MASTER
> carp42: state transition: BACKUP -> MASTER
> carp5: state transition: BACKUP -> MASTER
> ukbd0: was console keyboard
> wskbd0 detached
> ukbd0 detached
> uhidev0 detached
> wsmouse0 detached
> ums0 detached
> uhidev1 detached
> wsmouse1 detached
> ums1 detached
> uhidev2 detached
>

--
xpetrl

Reply | Threaded
Open this post in threaded view
|

Re: Random reboot PRC H330 raid controller Openbsd6.5

Otto Moerbeek
In reply to this post by Mohamed LAROUCI
On Fri, Nov 08, 2019 at 04:31:54PM +0100, Mohamed LAROUCI wrote:

> Hi Folks,
>
> I'd like to share our experience/troubles 🙂 that we are experiencing with 4
> PowerEdge R230 for few months.
>
> Our servers are running Openbsd 6.5 OS and we have had several system
> freezes (where only a hard reboot fixed the problem).
>
> We identified the source of theses freezes, so that every time the servers
> hanged, we find the error below in the Raid H330 logs.
>
> "Assertion failure in ../../raid/mpthostcmd.c at line 656:MonTask: line 656
> in file ../../raid/mpthostcmd.c Invader: sp=c00ae118 online reset - no input
> needed_esram_initial_code:c02264d0 _io_path_code_start:c0233880
> _io_path_code_end:c025fdd4

To be clear, this is an error message from the card's firmware, not
from OpenBSD.

        -Otto

>
> C0:online reset - wait for Reset to occur
>
> montask 1
>
> _MonTask: Online Controller Reset"
>
> Has anyone run  into the same problem ?
>
> I'm wondering, if a replace both disk and raid controllers by new ones.
>
> Thank you for your feedbacks.
>
> Server: PE R230
>
> Raid Controller: H330
>
> Disk: Toshiba DT01ACA0 - 500G SATA
>
> You can find a dmeg output below.
>
> Best regards,
> Mohamed Larouci.
>
>   ~# dmesg
> OpenBSD 6.5 (GENERIC.MP) #1: Mon May 27 18:27:59 CEST 2019
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 4100808704 (3910MB)
> avail mem = 3966902272 (3783MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x8ef68000 (43 entries)
> bios0: vendor Dell Inc. version "2.6.1" date 12/06/2018
> bios0: Dell Inc. PowerEdge R230
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S5
> acpi0: tables DSDT FACP SSDT TPM2 BOOT SSDT SLIC HPET LPIT APIC MCFG
> WDAT SSDT DBGP DBG2 SSDT SSDT SSDT SSDT SSDT SSDT PRAD HEST BERT ERST
> EINJ DMAR FPDT
> acpi0: wakeup devices PEGP(S0) PEG0(S0) PEGP(S0) PEG1(S0) PEGP(S0)
> PEG2(S0) XHC_(S0) XDCI(S0) PXSX(S0) RP01(S0) PXSX(S0) RP02(S0)
> PXSX(S0) RP03(S0) PXSX(S0) RP04(S0) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 23999999 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3692.78 MHz, 06-9e-09
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 23MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> cpu4 at mainbus0: apid 1 (application processor)
> cpu4: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
> cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu4: 256KB 64b/line 8-way L2 cache
> cpu4: smt 1, core 0, package 0
> cpu5 at mainbus0: apid 3 (application processor)
> cpu5: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.35 MHz, 06-9e-09
> cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu5: 256KB 64b/line 8-way L2 cache
> cpu5: smt 1, core 1, package 0
> cpu6 at mainbus0: apid 5 (application processor)
> cpu6: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
> cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu6: 256KB 64b/line 8-way L2 cache
> cpu6: smt 1, core 2, package 0
> cpu7 at mainbus0: apid 7 (application processor)
> cpu7: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.35 MHz, 06-9e-09
> cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu7: 256KB 64b/line 8-way L2 cache
> cpu7: smt 1, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt0: no apic found for irq 32
> acpiprt0: no apic found for irq 33
> acpiprt0: no apic found for irq 34
> acpiprt1 at acpi0: bus 1 (PEG0)
> acpiprt2 at acpi0: bus 2 (PEG1)
> acpiprt3 at acpi0: bus -1 (PEG2)
> acpiprt4 at acpi0: bus -1 (RP01)
> acpiprt5 at acpi0: bus -1 (RP02)
> acpiprt6 at acpi0: bus -1 (RP03)
> acpiprt7 at acpi0: bus -1 (RP04)
> acpiprt8 at acpi0: bus -1 (RP05)
> acpiprt9 at acpi0: bus -1 (RP06)
> acpiprt10 at acpi0: bus -1 (RP07)
> acpiprt11 at acpi0: bus -1 (RP08)
> acpiprt12 at acpi0: bus 3 (RP09)
> acpiprt13 at acpi0: bus -1 (RP10)
> acpiprt14 at acpi0: bus 4 (RP11)
> acpiprt15 at acpi0: bus -1 (RP12)
> acpiprt16 at acpi0: bus -1 (RP13)
> acpiprt17 at acpi0: bus -1 (RP14)
> acpiprt18 at acpi0: bus -1 (RP15)
> acpiprt19 at acpi0: bus -1 (RP16)
> acpiprt20 at acpi0: bus -1 (RP17)
> acpiprt21 at acpi0: bus -1 (RP18)
> acpiprt22 at acpi0: bus -1 (RP19)
> acpiprt23 at acpi0: bus -1 (RP20)
> acpicpu0 at acpi0: C1(@1 halt!)
> acpicpu1 at acpi0: C1(@1 halt!)
> acpicpu2 at acpi0: C1(@1 halt!)
> acpicpu3 at acpi0: C1(@1 halt!)
> acpicpu4 at acpi0: C1(@1 halt!)
> acpicpu5 at acpi0: C1(@1 halt!)
> acpicpu6 at acpi0: C1(@1 halt!)
> acpicpu7 at acpi0: C1(@1 halt!)
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> acpicmos0 at acpi0
> acpibtn0 at acpi0: SLPB
> "PNP0C14" at acpi0 not configured
> "PNP0C33" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> ipmi at mainbus0 not configured
> cpu0: using VERW MDS workaround
> memory map conflict 0xe00fd000/0x1000
> memory map conflict 0xfe000000/0x11000
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v6/7 Host" rev 0x05
> ppb0 at pci0 dev 1 function 0 "Intel Core 6G PCIE" rev 0x05: msi
> pci1 at ppb0 bus 1
> mfii0 at pci1 dev 0 function 0 "Symbios Logic MegaRAID SAS3008" rev 0x02: msi
> mfii0: "PERC H330 Adapter", firmware 25.5.5.0005
> scsibus1 at mfii0: 32 targets
> scsibus2 at mfii0: 256 targets
> sd0 at scsibus2 targ 0 lun 0: <ATA, TOSHIBA DT01ACA0, A810> SCSI4
> 0/direct fixed naa.5000039fd2e5488f
> sd0: 476940MB, 512 bytes/sector, 976773168 sectors
> sd1 at scsibus2 targ 1 lun 0: <ATA, TOSHIBA DT01ACA0, A810> SCSI4
> 0/direct fixed naa.5000039fd2e51fc5
> sd1: 476940MB, 512 bytes/sector, 976773168 sectors
> ppb1 at pci0 dev 1 function 1 "Intel Core 6G PCIE" rev 0x05: msi
> pci2 at ppb1 bus 2
> ix0 at pci2 dev 0 function 0 "Intel 82599" rev 0x01: msi, address
> 90:e2:ba:7d:00:94
> ix1 at pci2 dev 0 function 1 "Intel 82599" rev 0x01: msi, address
> 90:e2:ba:7d:00:95
> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
> "Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
> "Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 1 not configured
> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi,
> AHCI 1.3.1
> scsibus3 at ahci0: 32 targets
> ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
> pci3 at ppb2 bus 3
> 3:0:0: mem address conflict 0xfffc0000/0x40000
> 3:0:1: mem address conflict 0xfffc0000/0x40000
> bge0 at pci3 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0
> (0x5720000), APE firmware NCSI 1.5.1.0: msi, address 50:9a:4c:7f:93:eb
> brgphy0 at bge0 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0
> bge1 at pci3 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0
> (0x5720000), APE firmware NCSI 1.5.1.0: msi, address 50:9a:4c:7f:93:ec
> brgphy1 at bge1 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0
> ppb3 at pci0 dev 29 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
> pci5 at ppb4 bus 5
> ppb5 at pci5 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
> pci6 at ppb5 bus 6
> ppb6 at pci6 dev 0 function 0 "Renesas SH7758 PCIE-PCI" rev 0x00
> pci7 at ppb6 bus 7
> vga1 at pci7 dev 0 function 0 "Matrox MGA G200eR" rev 0x01
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 31 function 0 "Intel C236 LPC" rev 0x31
> "Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31:
> apic 2 int 16
> iic0 at ichiic0
> sdtemp0 at iic0 addr 0x19: stts2004
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> uhub1 at uhub0 port 3 configuration 1 interface 0 "no manufacturer
> Gadget USB HUB" rev 2.00/0.00 addr 2
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent
> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent
> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
> uhidev1: iclass 3/1
> ums0 at uhidev1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhidev2 at uhub1 port 1 configuration 1 interface 2 "Avocent
> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
> uhidev2: iclass 3/1
> ums1 at uhidev2: 3 buttons, Z dir
> wsmouse1 at ums1 mux 0
> vscsi0 at root
> scsibus4 at vscsi0: 256 targets
> softraid0 at root
> scsibus5 at softraid0: 256 targets
> ukbd0: was console keyboard
> wskbd0 detached
> ukbd0 detached
> uhidev0 detached
> wsmouse0 detached
> ums0 detached
> uhidev1 detached
> wsmouse1 detached
> ums1 detached
> uhidev2 detached
> root on sd0a (88f3411986a4bef8.a) swap on sd0b dump on sd0b
> WARNING: / was not properly unmounted
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent
> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent
> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
> uhidev1: iclass 3/1
> ums0 at uhidev1: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhidev2 at uhub1 port 1 configuration 1 interface 2 "Avocent
> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
> uhidev2: iclass 3/1
> ums1 at uhidev2: 3 buttons, Z dir
> wsmouse1 at ums1 mux 0
> carp0: state transition: BACKUP -> MASTER
> carp1: state transition: BACKUP -> MASTER
> carp10: state transition: BACKUP -> MASTER
> carp11: state transition: BACKUP -> MASTER
> carp12: state transition: BACKUP -> MASTER
> carp13: state transition: BACKUP -> MASTER
> carp14: state transition: BACKUP -> MASTER
> carp15: state transition: BACKUP -> MASTER
> carp16: state transition: BACKUP -> MASTER
> carp19: state transition: BACKUP -> MASTER
> carp21: state transition: BACKUP -> MASTER
> carp22: state transition: BACKUP -> MASTER
> carp23: state transition: BACKUP -> MASTER
> carp24: state transition: BACKUP -> MASTER
> carp27: state transition: BACKUP -> MASTER
> carp7: state transition: BACKUP -> MASTER
> carp28: state transition: BACKUP -> MASTER
> carp29: state transition: BACKUP -> MASTER
> carp30: state transition: BACKUP -> MASTER
> carp31: state transition: BACKUP -> MASTER
> carp34: state transition: BACKUP -> MASTER
> carp36: state transition: BACKUP -> MASTER
> carp38: state transition: BACKUP -> MASTER
> carp39: state transition: BACKUP -> MASTER
> carp40: state transition: BACKUP -> MASTER
> carp41: state transition: BACKUP -> MASTER
> carp42: state transition: BACKUP -> MASTER
> carp5: state transition: BACKUP -> MASTER
> ukbd0: was console keyboard
> wskbd0 detached
> ukbd0 detached
> uhidev0 detached
> wsmouse0 detached
> ums0 detached
> uhidev1 detached
> wsmouse1 detached
> ums1 detached
> uhidev2 detached
>

Reply | Threaded
Open this post in threaded view
|

Re: Random reboot PRC H330 raid controller Openbsd6.5

Mohamed LAROUCI
Ok, we thought is has something with openbsd drivers.

Thank's for your reply.

Le 08/11/2019 à 17:03, Otto Moerbeek a écrit :

> On Fri, Nov 08, 2019 at 04:31:54PM +0100, Mohamed LAROUCI wrote:
>
>> Hi Folks,
>>
>> I'd like to share our experience/troubles 🙂 that we are experiencing with 4
>> PowerEdge R230 for few months.
>>
>> Our servers are running Openbsd 6.5 OS and we have had several system
>> freezes (where only a hard reboot fixed the problem).
>>
>> We identified the source of theses freezes, so that every time the servers
>> hanged, we find the error below in the Raid H330 logs.
>>
>> "Assertion failure in ../../raid/mpthostcmd.c at line 656:MonTask: line 656
>> in file ../../raid/mpthostcmd.c Invader: sp=c00ae118 online reset - no input
>> needed_esram_initial_code:c02264d0 _io_path_code_start:c0233880
>> _io_path_code_end:c025fdd4
> To be clear, this is an error message from the card's firmware, not
> from OpenBSD.
>
> -Otto
>
>> C0:online reset - wait for Reset to occur
>>
>> montask 1
>>
>> _MonTask: Online Controller Reset"
>>
>> Has anyone run  into the same problem ?
>>
>> I'm wondering, if a replace both disk and raid controllers by new ones.
>>
>> Thank you for your feedbacks.
>>
>> Server: PE R230
>>
>> Raid Controller: H330
>>
>> Disk: Toshiba DT01ACA0 - 500G SATA
>>
>> You can find a dmeg output below.
>>
>> Best regards,
>> Mohamed Larouci.
>>
>>    ~# dmesg
>> OpenBSD 6.5 (GENERIC.MP) #1: Mon May 27 18:27:59 CEST 2019
>>      [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> real mem = 4100808704 (3910MB)
>> avail mem = 3966902272 (3783MB)
>> mpath0 at root
>> scsibus0 at mpath0: 256 targets
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x8ef68000 (43 entries)
>> bios0: vendor Dell Inc. version "2.6.1" date 12/06/2018
>> bios0: Dell Inc. PowerEdge R230
>> acpi0 at bios0: rev 2
>> acpi0: sleep states S0 S5
>> acpi0: tables DSDT FACP SSDT TPM2 BOOT SSDT SLIC HPET LPIT APIC MCFG
>> WDAT SSDT DBGP DBG2 SSDT SSDT SSDT SSDT SSDT SSDT PRAD HEST BERT ERST
>> EINJ DMAR FPDT
>> acpi0: wakeup devices PEGP(S0) PEG0(S0) PEGP(S0) PEG1(S0) PEGP(S0)
>> PEG2(S0) XHC_(S0) XDCI(S0) PXSX(S0) RP01(S0) PXSX(S0) RP02(S0)
>> PXSX(S0) RP03(S0) PXSX(S0) RP04(S0) [...]
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpihpet0 at acpi0: 23999999 Hz
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3692.78 MHz, 06-9e-09
>> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>> cpu0: 256KB 64b/line 8-way L2 cache
>> cpu0: smt 0, core 0, package 0
>> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
>> cpu0: apic clock running at 23MHz
>> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
>> cpu1 at mainbus0: apid 2 (application processor)
>> cpu1: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
>> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>> cpu1: 256KB 64b/line 8-way L2 cache
>> cpu1: smt 0, core 1, package 0
>> cpu2 at mainbus0: apid 4 (application processor)
>> cpu2: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
>> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>> cpu2: 256KB 64b/line 8-way L2 cache
>> cpu2: smt 0, core 2, package 0
>> cpu3 at mainbus0: apid 6 (application processor)
>> cpu3: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
>> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>> cpu3: 256KB 64b/line 8-way L2 cache
>> cpu3: smt 0, core 3, package 0
>> cpu4 at mainbus0: apid 1 (application processor)
>> cpu4: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
>> cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>> cpu4: 256KB 64b/line 8-way L2 cache
>> cpu4: smt 1, core 0, package 0
>> cpu5 at mainbus0: apid 3 (application processor)
>> cpu5: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.35 MHz, 06-9e-09
>> cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>> cpu5: 256KB 64b/line 8-way L2 cache
>> cpu5: smt 1, core 1, package 0
>> cpu6 at mainbus0: apid 5 (application processor)
>> cpu6: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.36 MHz, 06-9e-09
>> cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>> cpu6: 256KB 64b/line 8-way L2 cache
>> cpu6: smt 1, core 2, package 0
>> cpu7 at mainbus0: apid 7 (application processor)
>> cpu7: Intel(R) Xeon(R) CPU E3-1230 v6 @ 3.50GHz, 3691.35 MHz, 06-9e-09
>> cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
>> cpu7: 256KB 64b/line 8-way L2 cache
>> cpu7: smt 1, core 3, package 0
>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
>> acpimcfg0 at acpi0
>> acpimcfg0: addr 0xe0000000, bus 0-255
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt0: no apic found for irq 32
>> acpiprt0: no apic found for irq 33
>> acpiprt0: no apic found for irq 34
>> acpiprt1 at acpi0: bus 1 (PEG0)
>> acpiprt2 at acpi0: bus 2 (PEG1)
>> acpiprt3 at acpi0: bus -1 (PEG2)
>> acpiprt4 at acpi0: bus -1 (RP01)
>> acpiprt5 at acpi0: bus -1 (RP02)
>> acpiprt6 at acpi0: bus -1 (RP03)
>> acpiprt7 at acpi0: bus -1 (RP04)
>> acpiprt8 at acpi0: bus -1 (RP05)
>> acpiprt9 at acpi0: bus -1 (RP06)
>> acpiprt10 at acpi0: bus -1 (RP07)
>> acpiprt11 at acpi0: bus -1 (RP08)
>> acpiprt12 at acpi0: bus 3 (RP09)
>> acpiprt13 at acpi0: bus -1 (RP10)
>> acpiprt14 at acpi0: bus 4 (RP11)
>> acpiprt15 at acpi0: bus -1 (RP12)
>> acpiprt16 at acpi0: bus -1 (RP13)
>> acpiprt17 at acpi0: bus -1 (RP14)
>> acpiprt18 at acpi0: bus -1 (RP15)
>> acpiprt19 at acpi0: bus -1 (RP16)
>> acpiprt20 at acpi0: bus -1 (RP17)
>> acpiprt21 at acpi0: bus -1 (RP18)
>> acpiprt22 at acpi0: bus -1 (RP19)
>> acpiprt23 at acpi0: bus -1 (RP20)
>> acpicpu0 at acpi0: C1(@1 halt!)
>> acpicpu1 at acpi0: C1(@1 halt!)
>> acpicpu2 at acpi0: C1(@1 halt!)
>> acpicpu3 at acpi0: C1(@1 halt!)
>> acpicpu4 at acpi0: C1(@1 halt!)
>> acpicpu5 at acpi0: C1(@1 halt!)
>> acpicpu6 at acpi0: C1(@1 halt!)
>> acpicpu7 at acpi0: C1(@1 halt!)
>> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
>> acpicmos0 at acpi0
>> acpibtn0 at acpi0: SLPB
>> "PNP0C14" at acpi0 not configured
>> "PNP0C33" at acpi0 not configured
>> acpivideo0 at acpi0: GFX0
>> acpivout0 at acpivideo0: DD1F
>> ipmi at mainbus0 not configured
>> cpu0: using VERW MDS workaround
>> memory map conflict 0xe00fd000/0x1000
>> memory map conflict 0xfe000000/0x11000
>> pci0 at mainbus0 bus 0
>> pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v6/7 Host" rev 0x05
>> ppb0 at pci0 dev 1 function 0 "Intel Core 6G PCIE" rev 0x05: msi
>> pci1 at ppb0 bus 1
>> mfii0 at pci1 dev 0 function 0 "Symbios Logic MegaRAID SAS3008" rev 0x02: msi
>> mfii0: "PERC H330 Adapter", firmware 25.5.5.0005
>> scsibus1 at mfii0: 32 targets
>> scsibus2 at mfii0: 256 targets
>> sd0 at scsibus2 targ 0 lun 0: <ATA, TOSHIBA DT01ACA0, A810> SCSI4
>> 0/direct fixed naa.5000039fd2e5488f
>> sd0: 476940MB, 512 bytes/sector, 976773168 sectors
>> sd1 at scsibus2 targ 1 lun 0: <ATA, TOSHIBA DT01ACA0, A810> SCSI4
>> 0/direct fixed naa.5000039fd2e51fc5
>> sd1: 476940MB, 512 bytes/sector, 976773168 sectors
>> ppb1 at pci0 dev 1 function 1 "Intel Core 6G PCIE" rev 0x05: msi
>> pci2 at ppb1 bus 2
>> ix0 at pci2 dev 0 function 0 "Intel 82599" rev 0x01: msi, address
>> 90:e2:ba:7d:00:94
>> ix1 at pci2 dev 0 function 1 "Intel 82599" rev 0x01: msi, address
>> 90:e2:ba:7d:00:95
>> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi, xHCI 1.0
>> usb0 at xhci0: USB revision 3.0
>> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
>> 3.00/1.00 addr 1
>> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
>> "Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
>> "Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 1 not configured
>> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi,
>> AHCI 1.3.1
>> scsibus3 at ahci0: 32 targets
>> ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
>> pci3 at ppb2 bus 3
>> 3:0:0: mem address conflict 0xfffc0000/0x40000
>> 3:0:1: mem address conflict 0xfffc0000/0x40000
>> bge0 at pci3 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0
>> (0x5720000), APE firmware NCSI 1.5.1.0: msi, address 50:9a:4c:7f:93:eb
>> brgphy0 at bge0 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0
>> bge1 at pci3 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0
>> (0x5720000), APE firmware NCSI 1.5.1.0: msi, address 50:9a:4c:7f:93:ec
>> brgphy1 at bge1 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0
>> ppb3 at pci0 dev 29 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
>> pci4 at ppb3 bus 4
>> ppb4 at pci4 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
>> pci5 at ppb4 bus 5
>> ppb5 at pci5 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
>> pci6 at ppb5 bus 6
>> ppb6 at pci6 dev 0 function 0 "Renesas SH7758 PCIE-PCI" rev 0x00
>> pci7 at ppb6 bus 7
>> vga1 at pci7 dev 0 function 0 "Matrox MGA G200eR" rev 0x01
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> pcib0 at pci0 dev 31 function 0 "Intel C236 LPC" rev 0x31
>> "Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
>> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31:
>> apic 2 int 16
>> iic0 at ichiic0
>> sdtemp0 at iic0 addr 0x19: stts2004
>> isa0 at pcib0
>> isadma0 at isa0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> vmm0 at mainbus0: VMX/EPT
>> uhub1 at uhub0 port 3 configuration 1 interface 0 "no manufacturer
>> Gadget USB HUB" rev 2.00/0.00 addr 2
>> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent
>> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
>> uhidev0: iclass 3/1
>> ukbd0 at uhidev0: 8 variable keys, 6 key codes
>> wskbd0 at ukbd0: console keyboard, using wsdisplay0
>> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent
>> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
>> uhidev1: iclass 3/1
>> ums0 at uhidev1: 3 buttons, Z dir
>> wsmouse0 at ums0 mux 0
>> uhidev2 at uhub1 port 1 configuration 1 interface 2 "Avocent
>> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
>> uhidev2: iclass 3/1
>> ums1 at uhidev2: 3 buttons, Z dir
>> wsmouse1 at ums1 mux 0
>> vscsi0 at root
>> scsibus4 at vscsi0: 256 targets
>> softraid0 at root
>> scsibus5 at softraid0: 256 targets
>> ukbd0: was console keyboard
>> wskbd0 detached
>> ukbd0 detached
>> uhidev0 detached
>> wsmouse0 detached
>> ums0 detached
>> uhidev1 detached
>> wsmouse1 detached
>> ums1 detached
>> uhidev2 detached
>> root on sd0a (88f3411986a4bef8.a) swap on sd0b dump on sd0b
>> WARNING: / was not properly unmounted
>> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent
>> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
>> uhidev0: iclass 3/1
>> ukbd0 at uhidev0: 8 variable keys, 6 key codes
>> wskbd0 at ukbd0: console keyboard, using wsdisplay0
>> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent
>> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
>> uhidev1: iclass 3/1
>> ums0 at uhidev1: 3 buttons, Z dir
>> wsmouse0 at ums0 mux 0
>> uhidev2 at uhub1 port 1 configuration 1 interface 2 "Avocent
>> Keyboard/Mouse Function" rev 2.00/0.00 addr 3
>> uhidev2: iclass 3/1
>> ums1 at uhidev2: 3 buttons, Z dir
>> wsmouse1 at ums1 mux 0
>> carp0: state transition: BACKUP -> MASTER
>> carp1: state transition: BACKUP -> MASTER
>> carp10: state transition: BACKUP -> MASTER
>> carp11: state transition: BACKUP -> MASTER
>> carp12: state transition: BACKUP -> MASTER
>> carp13: state transition: BACKUP -> MASTER
>> carp14: state transition: BACKUP -> MASTER
>> carp15: state transition: BACKUP -> MASTER
>> carp16: state transition: BACKUP -> MASTER
>> carp19: state transition: BACKUP -> MASTER
>> carp21: state transition: BACKUP -> MASTER
>> carp22: state transition: BACKUP -> MASTER
>> carp23: state transition: BACKUP -> MASTER
>> carp24: state transition: BACKUP -> MASTER
>> carp27: state transition: BACKUP -> MASTER
>> carp7: state transition: BACKUP -> MASTER
>> carp28: state transition: BACKUP -> MASTER
>> carp29: state transition: BACKUP -> MASTER
>> carp30: state transition: BACKUP -> MASTER
>> carp31: state transition: BACKUP -> MASTER
>> carp34: state transition: BACKUP -> MASTER
>> carp36: state transition: BACKUP -> MASTER
>> carp38: state transition: BACKUP -> MASTER
>> carp39: state transition: BACKUP -> MASTER
>> carp40: state transition: BACKUP -> MASTER
>> carp41: state transition: BACKUP -> MASTER
>> carp42: state transition: BACKUP -> MASTER
>> carp5: state transition: BACKUP -> MASTER
>> ukbd0: was console keyboard
>> wskbd0 detached
>> ukbd0 detached
>> uhidev0 detached
>> wsmouse0 detached
>> ums0 detached
>> uhidev1 detached
>> wsmouse1 detached
>> ums1 detached
>> uhidev2 detached
>>