|
Hi!
I reported troubles with this keypad on reddit and was asked to report
it on bugs@. Hope this is the right place :)
When connecting the Filco TenKeyPad USB numeric keypad to ThinkPad X201
with OpenBSD 6.3 the following happens.
When the keypad is connected the NumLock-light is off but all numeric
keys on the keypad works except the equal-sign-button. When I press
the equal-sign no key works afterwards.
When I press NumLock directly after connecting the light on the keypad
lights up and the keys Esc, Tab, BackSpace, -, + and Enter works as
expected but as soon any other key on the keypad is pressed it locks up
the same way as described above.
The NumLock-function for the internal keyboard works as it should.
The BIOS-setting for NumLock is set to Independent.
/var/log/messages reports:
Apr 14 09:41:26 bob /bsd: uhidev0 at uhub2 port 1 configuration 1 interface 0 "Cypress Cypress USB Keyboard / PS2 Mouse" rev 1.10/0.01 addr 3
Apr 14 09:41:26 bob /bsd: uhidev0: iclass 3/1
Apr 14 09:41:26 bob /bsd: ukbd0 at uhidev0: 8 variable keys, 6 key codes
Apr 14 09:41:26 bob /bsd: wskbd1 at ukbd0 mux 1
Apr 14 09:41:26 bob /bsd: wskbd1: connecting to wsdisplay0
pcidump reports:
Domain /dev/pci0:
0:0:0: Intel Core Host
0:2:0: Intel HD Graphics
0:22:0: Intel 3400 MEI
0:25:0: Intel 82577LM
0:26:0: Intel 3400 USB
0:27:0: Intel 3400 HD Audio
0:28:0: Intel 3400 PCIE
0:28:3: Intel 3400 PCIE
0:28:4: Intel 3400 PCIE
0:29:0: Intel 3400 USB
0:30:0: Intel 82801BAM Hub-to-PCI
0:31:0: Intel QM57 LPC
0:31:2: Intel 3400 SATA
0:31:3: Intel 3400 SMBus
0:31:5: Intel 3400 SATA
0:31:6: Intel 3400 Thermal
2:0:0: Intel Centrino Advanced-N 6200
255:0:0: Intel QuickPath
255:0:1: Intel QuickPath
255:2:0: Intel QPI Link
255:2:1: Intel QPI Physical
255:2:2: Intel Reserved
255:2:3: Intel Reserved
|