Problem ripping audio CD in Liteon DVD-DL drive

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Problem ripping audio CD in Liteon DVD-DL drive

Tubnor, Jason B
Hi,

I have a problem ripping an audio CD with cdparanoia.  Software that I
am using is grip and cdparanoia from the 3.8 packages tree.  The drive
that I have is a Liteon DVD-DL (IDE).  When I put the audio CD in the
drive while grip is in operation, the CD spins up and is read, following
that a DB lookup is performed and the tracks are labelled correctly so
the CD is being read correctly though when I hit rip, it briefly reads
each track and then moves to the next track until the whole CD is read
in only a couple of seconds.  The error that is appearing while this is
happening is at the bottom of my dmesg trail.  I am currently following
the -current tree.  This problem was also able to be reproduced on the
3.8-release.  Sorry I do not have any previous versions of OpenBSD to
see if it has functioned correctly beforehand.  Data CD's mount
correctly and can be read without error on the same drive.

Any advice would be appreciated.

Cheers,

Jason.

----------

$ dmesg
OpenBSD 3.8-current (GENERIC) #0: Thu Nov  3 10:12:47 EST 2005
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 2400+ ("AuthenticAMD" 686-class, 256KB L2 cache)
2.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
MMX,FXSR,SSE
cpu0: AMD Powernow: TS
real mem  = 502833152 (491048K)
avail mem = 451862528 (441272K)
using 4278 buffers containing 25243648 bytes (24652K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 01/14/04, BIOS32 rev. 0 @
0xfa3a0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc744
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfc6b0/144 (7 entries)
pcibios0: PCI Exclusive IRQs: 5 6 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev
0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x7e00
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA VT8378 PCI" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA VT8378 VGA" rev 0x01: aperture at
0xd8000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x80: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x80: irq 6
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x80: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3 "VIA VT6202 USB" rev 0x82: irq 5
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8235 ISA" rev 0x00
pciide0 at pci0 dev 17 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD2000JB-00FUA0>
wd0: 16-sector PIO, LBA48, 190781MB, 390719855 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4163B, A100> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x50: irq 10
ac97: codec id 0x56494170 (VIA Technologies <70>)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x74: irq 11 address
00:0d:61:65:6d:b4
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 8: OUI
0x000008, model 0x4063
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
biomask ef65 netmask ef65 ttymask ffe7
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
umass0 at uhub3 port 5 configuration 1 interface 0
umass0: USB2.0 CardReader, rev 2.00/91.38, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <USB2.0, CBO CardReader, > SCSI0 0/direct
removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <USB2.0, CBO CardReader, > SCSI0 0/direct
removable
sd1: drive offline
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
lpt0: out of paper
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track
cd0(atapiscsi0:0:0): Check Condition (error 0x70) on opcode 0x28
    SENSE KEY: Illegal Request
               Incorrect Length Indicator Set
 COMMAND INFO: 0x280a0120
     ASC/ASCQ: Illegal Mode For This Track

Reply | Threaded
Open this post in threaded view
|

Re: Problem ripping audio CD in Liteon DVD-DL drive

Jacob Meuser
On Fri, Nov 04, 2005 at 03:25:48PM +1100, Tubnor, Jason B wrote:
> Hi,
>
> I have a problem ripping an audio CD with cdparanoia.  Software that I
> am using is grip and cdparanoia from the 3.8 packages tree.  The drive
> that I have is a Liteon DVD-DL (IDE).  When I put the audio CD in the

> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-4163B, A100> SCSI0
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2

that is an LG, not a LiteOn.  some searching on google found
other people having issues with these as well, but I also found a
page where the authors used several brands of DVD media and they
recommend the drive, but note "I have strong faith that with a
little more firmware tweaking, 16x single layer, and even dual
layer recording could be made quite stable and effective."
you appear to have a first generation firmware, "A100".  perhaps
your problem is related to that?

I can confirm that cdparanoia works correctly for me on -current
with a LiteOn "DVDRW SOHW-1633S" with same IDE controller as you,
"VIA VT82C571 IDE" rev 0x06.

if I were you, I'd try to update the firmware of the drive.

--
<[hidden email]>