Panic current/AMD64

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Panic current/AMD64

Sigfred Håversen
Snapshot dated 20th of february crashes. An ftp installation using
floppy was OK.

Attached a dmesg when booting from floppy as well.

/Sigfred


 >> OpenBSD/amd64 BOOT 2.11
boot> boot
booting hd0a:/bsd: 3697924+694534+601616+0+422832
[80+308328+189732]=0x9a508c
entry point at 0x1001e0 [7205c766, 34000004, 24448b12, ce60a304][ using
498912 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
         The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 3.9-beta (GENERIC) #444: Mon Feb 20 15:19:58 MST 2006
     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 536408064 (523836K)
avail mem = 448188416 (437684K)
using 13147 buffers containing 53850112 bytes (52588K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Dual Core AMD Opteron(tm) Processor 170, 2010.53 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
lm1 at iic1 addr 0x2f: W83791SD
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 11,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 12
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: irq 12,
nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3120026A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-4550A, 1.07> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA 1" rev 0xf3: DMA
pciide1: using irq 11 for native-PCI interrupt
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA 2" rev 0xf3: DMA
pciide2: using irq 5 for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 5
pciide3 at pci1 dev 10 function 0 "CMD Technology SiI3114 SATA" rev
0x02: DMA
pciide3: using irq 5 for native-PCI interrupt
"Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci1 dev 11 function
0 not configured
skc0 at pci1 dev 12 function 0 "Marvell Yukon 88E8001/8003/8010" rev
0x13, Marvell Yukon Lite (0x9): irq 3
sk0 at skc0 port A, address 00:15:f2:1d:2a:75
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 5,
address 00:15:f2:1d:13:63
eephy1 at nfe0 phy 9: Marvell 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 4
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 2
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 1
vga1 at pci5 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0panic: isadmaattach: can not create DMA map
Stopped at      Debugger+0x5:   leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> ps
    PID   PPID   PGRP    UID  S       FLAGS  WAIT       COMMAND
*    0     -1      0      0  7     0x80204             swapper
ddb> trace
Debugger() at Debugger+0x5
panic() at panic+0x12a
isadmaattach() at isadmaattach+0x87
config_attach() at config_attach+0x10f
isascan() at isascan+0x14d
config_scan() at config_scan+0xce
config_attach() at config_attach+0x10f
pcib_callback() at pcib_callback+0x4e
config_process_deferred_children() at config_process_deferred_children+0x5f
config_attach() at config_attach+0x117
mainbus_attach() at mainbus_attach+0x121
config_attach() at config_attach+0x10f
cpu_configure() at cpu_configure+0x1c
main() at main+0x35c
end trace frame: 0x0, count: -14






dmesg when using floppy39.fs:

boot> boot
booting fd0a:/bsd: 1012352+212070+2061280+0+303976=0x76d628
entry point at 0x1001e0 [7205c766, 34000004, 24448b12,
b2e0a304]Copyright (c) 1982, 1986, 1989, 1991, 1993
         The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 3.9-beta (RAMDISK) #659: Mon Feb 20 15:53:57 MST 2006
     [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK
real mem = 536408064 (523836K)
avail mem = 450465792 (439908K)
using 13147 buffers containing 53850112 bytes (52588K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Dual Core AMD Opteron(tm) Processor 170, 2010.53 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
"NVIDIA nForce4 ISA" rev 0xa3 at pci0 dev 1 function 0 not configured
"NVIDIA nForce4 SMBus" rev 0xa2 at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 11,
version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
"NVIDIA nForce4 USB" rev 0xa3 at pci0 dev 2 function 1 not configured
"NVIDIA nForce4 AC97" rev 0xa2 at pci0 dev 4 function 0 not configured
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3120026A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-4550A, 1.07> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA 1" rev 0xf3: DMA
pciide1: using irq 11 for native-PCI interrupt
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA 2" rev 0xf3: DMA
pciide2: using irq 5 for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 5
pciide3 at pci1 dev 10 function 0 "CMD Technology SiI3114 SATA" rev
0x02: DMA
pciide3: using irq 5 for native-PCI interrupt
"Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci1 dev 11 function
0 not configured
skc0 at pci1 dev 12 function 0 "Marvell Yukon 88E8001/8003/8010" rev
0x13, Marvell Yukon Lite (0x9): irq 3
sk0 at skc0 port A, address 00:15:f2:1d:2a:75
ukphy0 at sk0 phy 0: Generic IEEE 802.3u media interface, rev. 5: OUI
0x005043, model 0x0002
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 5,
address 00:15:f2:1d:13:63
ukphy1 at nfe0 phy 9: Generic IEEE 802.3u media interface, rev. 2: OUI
0x005043, model 0x000c
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 4
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 2
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 1
vga1 at pci5 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
rd0: fixed, 3584 blocks
dkcsum: wd0 matches BIOS drive 0x80
root on rd0a
rootdev=0x1100 rrootdev=0x2f00 rawdev=0x2f02
erase ^?, werase ^W, kill ^U, intr ^C, status ^T
(I)nstall, (U)pgrade or (S)hell?

Reply | Threaded
Open this post in threaded view
|

Re: Panic current/AMD64

Sigfred Håversen
Sigfred Heversen wrote:
> Snapshot dated 20th of february crashes. An ftp installation using
> floppy was OK.

By disabling isadma the machine will boot single processor AMD64
kernel, and seems to work fine. I can run X and various
applications with no problems. Sound works too.

For a MP AMD64 kernel shortly after boot there will be a
"kernel: page fault trap, code=0". Before the page fault there
are several errors reported for wd0. I changed the IDE cable,
but with same result.

For this motherboard (Asus A8N-SLI Premium) one must disable
pcibios to be able to boot with an i386 kernel. This is till
the case with a recent snapshot. This was reported before
to bugs@ :

http://marc.theaimsgroup.com/?t=112898486300001&r=1&w=2

dmesg for single processor and multiprocessor follows, along with
ps and trace for the MP kernel panic.

/Sigfred

OpenBSD 3.9-beta (GENERIC) #445: Thu Feb 23 17:20:59 MST 2006
     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 536408064 (523836K)
avail mem = 448188416 (437684K)
using 13147 buffers containing 53850112 bytes (52588K) of memory
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Dual Core AMD Opteron(tm) Processor 170 , 2010.53 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
lm1 at iic1 addr 0x2f: W83791SD
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: irq 10, version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: irq 12
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: irq 7, nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3120026A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-4550A, 1.07> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA 1" rev 0xf3: DMA
pciide1: using irq 11 for native-PCI interrupt
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA 2" rev 0xf3: DMA
pciide2: using irq 5 for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 5
"Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci1 dev 11 function 0 not configured
skc0 at pci1 dev 12 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x13, Marvell Yukon Lite (0x9): irq 12
sk0 at skc0 port A, address 00:15:f2:1d:2a:75
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: irq 3, address 00:15:f2:1d:13:63
eephy1 at nfe0 phy 9: Marvell 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 4
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 2
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 1
vga1 at pci5 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x290/8: IT87
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 1.10/16.00, addr 2, iclass 3/1
ums0 at uhidev0: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 3 configuration 1 interface 0
uhidev1: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 3, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 3 configuration 1 interface 1
uhidev2: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 3, iclass 3/0
uhidev2: no report descriptor
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302



boot> boot bsd.mp.orig -c
booting hd0a:bsd.mp.orig: 3780164+698155+610744+0+424688 [80+316248+195934]=0x9c0ef8
entry point at 0x1001e0 [7205c766, 34000004, 24448b12, 4e60a304][ using 513032 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
         The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.9-beta (GENERIC.MP) #719: Thu Feb 23 17:31:16 MST 2006
     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 536408064 (523836K)
avail mem = 448073728 (437572K)
using 13147 buffers containing 53850112 bytes (52588K) of memory
User Kernel Config
UKC> disable isadma
143 isadma0 disabled
UKC> exit
Continuing...
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 170 , 2010.53 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 201MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual Core AMD Opteron(tm) Processor 170 , 2010.30 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type ISA
ioapic0 at mainbus0 apid 2: pa 0xffff800000db7f24, version 11, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
lm1 at iic1 addr 0x2f: W83791SD
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 2 int 10 (irq 10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: apic 2 int 12 (irq 12)
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: apic 2 int 7 (irq 7), nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3120026A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-4550A, 1.07> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA 1" rev 0xf3: DMA
pciide1: using apic 2 int 5 (irq 11) for native-PCI interrupt
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA 2" rev 0xf3: DMA
pciide2: using apic 2 int 11 (irq 5) for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 5
"Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci1 dev 11 function 0 not configured
skc0 at pci1 dev 12 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x13, Marvell Yukon Lite (0x9): apic 2 int 12 (irq 12)
sk0 at skc0 port A, address 00:15:f2:1d:2a:75
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 2 int 3 (irq 3), address 00:15:f2:1d:13:63
eephy1 at nfe0 phy 9: Marvell 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 4
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 2
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 1
vga1 at pci5 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x290/8: IT87
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 1.10/16.00, addr 2, iclass 3/1
ums0 at uhidev0: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 3 configuration 1 interface 0
uhidev1: Microsoft Natural. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 3, iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 3 configuration 1 interface 1
uhidev2: Microsoft Natural. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 3, iclass 3/0
uhidev2: 1 report ids
uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
setting tty flags
kbd: keyboard mapping set to sv
machdep.allowaperture: 0 -> 2
starting network
starting system logger
starting initial daemons:wd0(pciide0:0:0): timeout
         type: ata
         c_bcount: 8192
         c_skip: 0
wd0e: device timeout writing fsbn 5626304 of 5626304-5626319 (wd0 bn 12442400; cn 12343 tn 10 sn 26), retrying
wd0: soft error (corrected)
wd0(pciide0:0:0): timeout
         type: ata
         c_bcount: 8192
         c_skip: 0
wd0: transfer error, downgrading to Ultra-DMA mode 4
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
wd0e: device timeout writing fsbn 5626304 of 5626304-5626319 (wd0 bn 12442400; cn 12343 tn 10 sn 26), retrying
wd0: soft error (corrected)
  ntpdwd0(pciide0:0:0): timeout
         type: ata
         c_bcount: 16384
         c_skip: 0
wd0: transfer error, downgrading to Ultra-DMA mode 3
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 3
wd0e: device timeout writing fsbn 5620736 of 5620736-5620767 (wd0 bn 12436832; cn 12338 tn 2 sn 2), retrying
wd0: soft error (corrected)
wd0(pciide0:0:0): timeout
         type: ata
         c_bcount: 2048
         c_skip: 0
wd0: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd0a: device timeout writing fsbn 16 of 16-19 (wd0 bn 79; cn 0 tn 1 sn 16), retrying
wd0: soft error (corrected)
wd0(pciide0:0:0): timeout
         type: ata
         c_bcount: 10240
         c_skip: 0
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1
wd0e: device timeout writing fsbn 5626304 of 5626304-5626323 (wd0 bn 12442400; cn 12343 tn 10 sn 26), retrying
wd0: soft error (corrected)
.
wd0(pciide0:0:0): timeout
         type: ata
         c_bcount: 10240
         c_skip: 0
wd0: transfer error, downgrading to Ultra-DMA mode 0
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 0
wd0e: device timeout writing fsbn 5626304 of 5626304-5626323 (wd0 bn 12442400; cn 12343 tn 10 sn 26), retrying
wd0: soft error (corrected)
wd0(pciide0:0:0): timeout
         type: ata
         c_bcount: 2048
         c_skip: 0
wd0: transfer error, downgrading to DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd0e: device timeout writing fsbn 16 of 16-19 (wd0 bn 6816112; cn 6762 tn 0 sn 16), retrying
wd0: soft error (corrected)
wd0(pciide0:0:0): timeout
         type: ata
         c_bcount: 10240
         c_skip: 0
wd0: transfer error, downgrading to PIO mode 4
kernel: page fault trap, code=0
Stopped at      nforce_setup_channel+0x1d3:     movzbl  wdc_pdc203xx_vtbl+0x14c
(%rax),%eax
ddb{0}> ps
    PID   PPID   PGRP    UID  S       FLAGS  WAIT       COMMAND
  27447  22179  22179      0  3   0x2004006  biowait    savecore
  11766  11523  11523     83  3   0x2000184  poll       ntpd
  11523      1  11523      0  3   0x2000084  poll       ntpd
   4628   8918   8918     73  3   0x2000104  ffs_fsync  syslogd
   8918      1   8918      0  3   0x2000084  netio      syslogd
  22179      1  22179      0  3   0x2004086  pause      sh
     12      0      0      0  3   0x2100204  crypto_wa  crypto
     11      0      0      0  3   0x2100204  aiodoned   aiodoned
     10      0      0      0  3   0x2100204  syncer     update
      9      0      0      0  3   0x2100204  cleaner    cleaner
      8      0      0      0  3    0x100204  reaper     reaper
      7      0      0      0  3   0x2100204  pgdaemon   pagedaemon
      6      0      0      0  3   0x2100204  pftm       pfpurge
      5      0      0      0  3   0x2100204  timeout    sensors
      4      0      0      0  3   0x2100204  usbevt     usb1
      3      0      0      0  3   0x2100204  usbtsk     usbtask
      2      0      0      0  3   0x2100204  usbevt     usb0
      1      0      1      0  3   0x2004084  wait       init
      0     -1      0      0  3   0x2080204  scheduler  swapper
ddb{0}> trace
nforce_setup_channel() at nforce_setup_channel+0x1d3
wdc_downgrade_mode() at wdc_downgrade_mode+0x9e
ata_dmaerr() at ata_dmaerr+0x3b
wdc_ata_bio_intr() at wdc_ata_bio_intr+0x222
wdctimeout() at wdctimeout+0xef
softclock() at softclock+0x21c
softintr_dispatch() at softintr_dispatch+0x5b
Xsoftclock() at Xsoftclock+0x32
--- interrupt ---
end of kernel
end trace frame: 0x2b0000000000000, count: -8
0:
ddb{0}>

Reply | Threaded
Open this post in threaded view
|

Re: Panic current/AMD64

Sigfred Håversen
Sigfred Heversen wrote:
[snip]
> For a MP AMD64 kernel shortly after boot there will be a
> "kernel: page fault trap, code=0". Before the page fault there
> are several errors reported for wd0. I changed the IDE cable,
> but with same result.

By using a PCI IDE card instead of the on-board IDE, I can boot
using MP kernel after disabling isadma. X also starts.

However, there is a problem with the PS2 keyboard stopping to
respond, and pressing NumLock or CapsLock does not make the
indicators light up. By plugging in an USB keyboard after the PS2
keyboard stopped working, I was able to type again for a short while.

The mouse is working even when the keyboard is not responding, so
I'm able to browse using Firefox.

Disabling devices in BIOS or moving the PCI IDE card to another
PCI slot did not help with the keyboard problem.

/Sigfred


OpenBSD 3.9-beta (GENERIC.MP) #719: Thu Feb 23 17:31:16 MST 2006
     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 536403968 (523832K)
avail mem = 448069632 (437568K)
using 13147 buffers containing 53850112 bytes (52588K) of memory
User Kernel Config
UKC> disable isadma
143 isadma0 disabled
UKC> exit
Continuing...
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 170 , 2010.53 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 201MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual Core AMD Opteron(tm) Processor 170 , 2010.30 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type ISA
ioapic0 at mainbus0 apid 2: pa 0xffff800000db7f24, version 11, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
lm1 at iic1 addr 0x2f: W83791SD
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 2 int 11 (irq 11), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: apic 2 int 10 (irq 10)
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: apic 2 int 7 (irq 7), nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-4550A, 1.07> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA 1" rev 0xf3: DMA
pciide1: using apic 2 int 5 (irq 11) for native-PCI interrupt
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA 2" rev 0xf3: DMA
pciide2: using apic 2 int 11 (irq 5) for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 5
pciide3 at pci1 dev 7 function 0 "Promise PDC20269" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide3: using apic 2 int 12 (irq 12) for native-PCI interrupt
wd0 at pciide3 channel 0 drive 0: <ST3120026A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide3:0:0): using PIO mode 4, Ultra-DMA mode 5
skc0 at pci1 dev 12 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x13, Marvell Yukon Lite (0x9): apic 2 int 12 (irq 12)
sk0 at skc0 port A, address 00:15:f2:1d:2a:75
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 2 int 3 (irq 3), address 00:15:f2:1d:13:63
eephy1 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 4
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 2
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 1
vga1 at pci5 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
it0 at isa0 port 0x290/8: IT87
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
uhidev0 at uhub0 port 4 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 1.10/16.00, addr 2, iclass 3/1
ums0 at uhidev0: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
uhidev0: at uhub0 port 4 (addr 2) disconnected
wsmouse0 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 4 configuration 1 interface 0
uhidev0: Logitech USB Receiver, rev 1.10/16.00, addr 2, iclass 3/1
ums0 at uhidev0: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev0: at uhub0 port 4 (addr 2) disconnected
wsmouse0 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1
uhidev1: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 2, iclass 3/0
uhidev1: 1 report ids
uhid0 at uhidev1 reportid 1: input=7, output=0, feature=0
uhidev2 at uhub0 port 4 configuration 1 interface 0
uhidev2: Logitech USB Receiver, rev 1.10/16.00, addr 3, iclass 3/1
ums0 at uhidev2: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
pckbc: cmd failed
pckbc: cmd failed
pckbc: cmd failed
pckbc: cmd failed
pckbc: cmd failed
pckbc: cmd failed
pckbc: cmd failed
pckbc: cmd failed
pckbc: cmd failed
pckbc: cmd failed

Reply | Threaded
Open this post in threaded view
|

Re: Panic current/AMD64

Sigfred Håversen
In reply to this post by Sigfred Håversen
Sigfred Heversen wrote:
[snip]
> For a MP AMD64 kernel shortly after boot there will be a
> "kernel: page fault trap, code=0". Before the page fault there
> are several errors reported for wd0. I changed the IDE cable,
> but with same result.

The onboard IDE now works in -current using amd64 MP kernel for
the Asus A8N-SLI Premium version 1.02 motherboard.

dmesg follows.

/Sigfred


OpenBSD 3.9-current (GENERIC.MP) #4: Sun Mar 12 17:28:28 CET 2006
     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2147020800 (2096700K)
avail mem = 1835737088 (1792712K)
using 22937 buffers containing 214908928 bytes (209872K) of memory
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (OEM00000 PROD00000000)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 170, 2010.53 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 201MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual Core AMD Opteron(tm) Processor 170, 2010.30 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type ISA
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
pci0 at mainbus0 bus 0: configuration mode 1
"NVIDIA nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "NVIDIA nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "NVIDIA nForce4 SMBus" rev 0xa2
iic0 at nviic0
iic1 at nviic0
lm1 at iic1 addr 0x2f: W83791SD
ohci0 at pci0 dev 2 function 0 "NVIDIA nForce4 USB" rev 0xa2: apic 2 int 11 (irq 11), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1 "NVIDIA nForce4 USB" rev 0xa3: apic 2 int 12 (irq 12)
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0 "NVIDIA nForce4 AC97" rev 0xa2: apic 2 int 12 (irq 12), nForce4 AC97
ac97: codec id 0x414c4790 (Avance Logic ALC850)
audio0 at auich0
pciide0 at pci0 dev 6 function 0 "NVIDIA nForce4 IDE" rev 0xf2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST3120026A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-4550A, 1.07> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
pciide1 at pci0 dev 7 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide1: using apic 2 int 5 (irq 11) for native-PCI interrupt
pciide2 at pci0 dev 8 function 0 "NVIDIA nForce4 SATA" rev 0xf3: DMA
pciide2: using apic 2 int 11 (irq 5) for native-PCI interrupt
ppb0 at pci0 dev 9 function 0 "NVIDIA nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 5
pciide3 at pci1 dev 10 function 0 "CMD Technology SiI3114 SATA" rev 0x02: DMA
pciide3: using apic 2 int 5 (irq 5) for native-PCI interrupt
"Texas Instruments TSB43AB22 FireWire" rev 0x00 at pci1 dev 11 function 0 not configured
skc0 at pci1 dev 12 function 0 "Marvell Yukon 88E8001/8003/8010" rev 0x13, Marvell Yukon Lite (0x9): apic 2 int 3 (irq 3)
sk0 at skc0 port A, address 00:15:f2:1d:2a:75
eephy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
nfe0 at pci0 dev 10 function 0 "NVIDIA CK804 LAN" rev 0xa3: apic 2 int 5 (irq 5), address 00:15:f2:1d:13:63
eephy1 at nfe0 phy 9: Marvell 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 11 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 4
ppb2 at pci0 dev 12 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
ppb3 at pci0 dev 13 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 2
ppb4 at pci0 dev 14 function 0 "NVIDIA nForce4 PCIE" rev 0xa3
pci5 at ppb4 bus 1
vga1 at pci5 dev 0 function 0 "NVIDIA GeForce 6600" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
it0 at isa0 port 0x290/8: IT87
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
uhidev0 at uhub0 port 1 configuration 1 interface 0
uhidev0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1
uhidev1: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 2, iclass 3/0
uhidev1: 1 report ids
uhid0 at uhidev1 reportid 1: input=7, output=0, feature=0
uhidev2 at uhub0 port 3 configuration 1 interface 0
uhidev2: Logitech USB Receiver, rev 1.10/16.00, addr 3, iclass 3/1
ums0 at uhidev2: 16 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302