PandaBoard ES

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

PandaBoard ES

Manuel Pata
Hi,

This is a dmesg of a PandaBoard ES i got my hands on yesterday.
Didn't pass the 'root' argument as the sd is not properly formatted. Will try to do that tomorrow or during the weekend.

If anyone wants to test something on this board, just say..

Thanks!

Panda # reset
resetting ...

U-Boot SPL 2012.07 (Sep 22 2012 - 05:05:13)
OMAP4460 ES1.1
OMAP SD/MMC: 0
reading u-boot.img
reading u-boot.img


U-Boot 2012.07 (Sep 22 2012 - 05:05:13)

CPU  : OMAP4460 ES1.1
Board: OMAP4 Panda
I2C:   ready
DRAM:  1 GiB
MMC:   OMAP SD/MMC: 0
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   No ethernet found.
checking for preEnv.txt
reading preEnv.txt

** Unable to read "preEnv.txt" from mmc 0:1 **
Hit any key to stop autoboot:  0
Panda # fatload mmc 0 0x80800000 bsd.umg
reading bsd.umg

2764328 bytes read
Panda # bootm 0x80800000
## Booting kernel from Legacy Image at 80800000 ...
   Image Name:   boot
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2764264 Bytes = 2.6 MiB
   Load Address: 80300000
   Entry Point:  80300000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...


OpenBSD/beagle booting ...
arg0 0x0 arg1 0xae7 arg2 0x80000100
atag core flags 0 pagesize 0 rootdev 0
atag revision 00000020
atag mem start 0x80000000 size 0x40000000
bootfile:
bootargs:
memory size derived from u-boot
bootconf.mem[0].address = 80000000 pages 262144/0x40000000
Allocating page tables
freestart = 0x00619000, free_pages = 530919 (0x000819e7)
IRQ stack: p0x81fd1000 v0xc1fd1000
ABT stack: p0x81fd0000 v0xc1fd0000
UND stack: p0x81fcf000 v0xc1fcf000
SVC stack: p0x81fcd000 v0xc1fcd000
Creating L1 page table at 0x81ffc000
Mapping kernel
Constructing L2 page tables
undefined page pmap [ no symbol table formats found ]
board type: panda
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.2-current (GENERIC) #0: Tue Jan 22 18:17:38 WET 2013
    [hidden email]:/usr/src/sys/arch/beagle/compile/GENERIC
real mem  = 1073741824 (1024MB)
avail mem = 1044975616 (996MB)
mainbus0 at root
cpu0 at mainbus0: ARM Cortex A9 R2 rev 10 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(32b/l,4way) I-cache, 32KB(32b/l,4way) wr-back D-cache
omap0 at mainbus0: PandaBoard
ampintc0 at omap0 nirq 160
amptimer0 at omap0: tick rate 488281 KHz
omdog0 at omap0 rev 0.1
omgpio0 at omap0 rev 0.1
omgpio1 at omap0 rev 0.1
omgpio2 at omap0 rev 0.1
omgpio3 at omap0 rev 0.1
omgpio4 at omap0 rev 0.1
omgpio5 at omap0 rev 0.1
ommmc0 at omap0
sdmmc0 at ommmc0
com0 at omap0: ti16750, 64 byte fifo
com0: console
/dev/ksyms: Symbol table not valid.
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd0: 7647MB, 512 bytes/sector, 15661056 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
boot device: lookup '' failed.
root device:

--
Manuel Pata
[hidden email]