PC Engines apu.1b system board dmesg

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

PC Engines apu.1b system board dmesg

Byron Klippert
http://pcengines.ch/apu.htm


Introduction: Thank you for taking the time to test our first round
prototypes of the new apu system board. Since this is a prototype, there
are a few bugs... Use at your own risk, don't use these boards for
anything critical.


############ BIOS boot capture:

coreboot-EDK_2.08.00_20130410_221-1434-g871c820-dirty Tue Aug 20
15:46:42 MDT 2013 booting...
PCI: Left over static devices:
PCI: 00:15.1
PCI: 00:15.2
PCI: 00:15.3
PCI: Check your devicetree.cb.
APIC: 00 missing read_resources
APIC: 01 missing read_resources
Start bios (version ?-20130820_154629-owner-HP)
CPU Mhz=1001
Found 30 PCI devices (max PCI bus is 06)
Found 2 cpu(s) max supported 2 cpu(s)
Copying PIR from 0x7e16f000 to 0x000fdb40
Copying MPTABLE from 0x7e170000/7e170010 to 0x000fda00
Copying ACPI RSDP from 0x7e171000 to 0x000fd9e0
Copying SMBIOS entry point from 0x7e17c400 to 0x000fd9c0
Scan for VGA option rom
EHCI init on dev 00:12.2 (regs=0xfeb08420)
EHCI init on dev 00:13.2 (regs=0xfeb08520)
OHCI init on dev 00:14.5 (regs=0xfeb06000)
EHCI init on dev 00:16.2 (regs=0xfeb08620)
Found 1 lpt ports
Found 1 serial ports
ATA controller 1 at 1f0/3f4/4010 (irq 14 dev a1)
ATA controller 2 at 170/374/4018 (irq 15 dev a1)
AHCI controller at 11.0, iobase feb08000, irq 0
Searching bootorder for: /rom@img/sortbootorder
Searching bootorder for: /rom@img/memtest
Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
AHCI/0: registering: "AHCI/0: SuperSSpeed S238 16GB ATA-7 Hard-Disk
(15258 MiBytes)"
Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1
USB MSC vendor='Multiple' product='Card  Reader' rev='1.00' type=0
removable=1
Searching bootorder for: /pci@i0cf8/usb@12,2/storage@1/*@0/*@0,0
Searching bootorder for: /pci@i0cf8/usb@12,2/usb-*@1
USB MSC vendor='Lexar' product='JD FireFly' rev='1100' type=0
removable=1
USB MSC blksize=512 sectors=7831552
USB MSC blksize=512 sectors=7995392
All threads complete.
Scan for option roms
Press F12 for boot menu.

Select boot device:

1. USB MSC Drive Multiple Card  Reader 1.00
2. USB MSC Drive Lexar JD FireFly 1100
3. AHCI/0: SuperSSpeed S238 16GB ATA-7 Hard-Disk (15258 MiByte
4. Payload [sortbootorder]
5. Payload [memtest]

drive 0x000fd8d0: PCHS=0/0/0 translation=lba LCHS=971/128/63 s=7831552
drive 0x000fd900: PCHS=0/0/0 translation=lba LCHS=991/128/63 s=7995392
drive 0x000fd930: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
s=31248704
Space available for UMB: 000c0000-000ee000
Returned 49152 bytes of ZoneHigh
e820 map has 6 items:
  0: 0000000000000000 - 000000000009fc00 = 1 RAM
  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
  3: 0000000000100000 - 000000007e16ac00 = 1 RAM
  4: 000000007e16ac00 - 000000007efffc00 = 2 RESERVED
  5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED
enter handle_19:
  NULL
Booting from Hard Disk...
Booting from 0000:7c00
Using drive 0, partition 3.
Loading.....
probing: pc0 com0 apm pci mem[639K 2016M a20=on]
disk: hd0+ hd1+ hd2*
>> OpenBSD/i386 BOOT 3.21
boot> stty com0 115200
boot> set tty com0
switching console to com0



############ dmesg capture:

switching console to com0
                          òzÁ¹  M½i386 BOOT 3.21
boot> boot bsd.rd.amd64.snapshot
booting hd0a:bsd.rd.amd64.snapshot: 3118100+960644+2897040+0+528720
[80+338136+2                                                            
                           19474]=0xbb16d0
entry point at 0x10001e0
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights
        reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 5.4-current (RAMDISK_CD) #147: Mon Dec  9 16:39:35 MST 2013
    [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error
ff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
real mem = 2098634752 (2001MB)
avail mem = 2037907456 (1943MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7e17c420 (6 entries)
bios0: vendor coreboot version
"EDK_2.08.00_20130410_221-1434-g871c820-dirty" date 08/20/2013
bios0: PC Engines APU
acpi0 at bios0: rev 0, ACPI control unavailable
mpbios at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD G-T40N Processor, 1000.13 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully
associative
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: couldn't map
interrupt
ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00
pci2 at ppb1 bus 2
re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: couldn't map
interrupt
ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00
pci3 at ppb2 bus 3
re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: couldn't map
interrupt
ppb3 at pci0 dev 7 function 0 "AMD AMD64 14h PCIE" rev 0x00
pci4 at ppb3 bus 4
athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: can't map
interrupt
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: unable to map
interrupt
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: couldn't map
interrupt
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: couldn't map
interrupt
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: couldn't map
interrupt
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: couldn't map
interrupt
"ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
"ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured
ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci5 at ppb4 bus 5
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: couldn't map
interrupt
ppb5 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
pci6 at ppb5 bus 6
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: couldn't map
interrupt
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: couldn't map
interrupt
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb6 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb7 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb8 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
softraid0 at root
scsibus0 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
erase ^?, werase ^W, kill ^U, intr ^C, status ^T

Welcome to the OpenBSD/amd64 5.4 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?



--
Byron Klippert      
  [hidden email]
  c. 867-336-1306

Reply | Threaded
Open this post in threaded view
|

Re: PC Engines apu.1b system board dmesg

emigrant-2
Wow new Alix, cant wait :)

On 16 Dec 2013, at 22:19, Byron Klippert <[hidden email]> wrote:

> http://pcengines.ch/apu.htm
>
>
> Introduction: Thank you for taking the time to test our first round
> prototypes of the new apu system board. Since this is a prototype, there
> are a few bugs... Use at your own risk, don't use these boards for
> anything critical.
>
>
> ############ BIOS boot capture:
>
> coreboot-EDK_2.08.00_20130410_221-1434-g871c820-dirty Tue Aug 20
> 15:46:42 MDT 2013 booting...
> PCI: Left over static devices:
> PCI: 00:15.1
> PCI: 00:15.2
> PCI: 00:15.3
> PCI: Check your devicetree.cb.
> APIC: 00 missing read_resources
> APIC: 01 missing read_resources
> Start bios (version ?-20130820_154629-owner-HP)
> CPU Mhz=1001
> Found 30 PCI devices (max PCI bus is 06)
> Found 2 cpu(s) max supported 2 cpu(s)
> Copying PIR from 0x7e16f000 to 0x000fdb40
> Copying MPTABLE from 0x7e170000/7e170010 to 0x000fda00
> Copying ACPI RSDP from 0x7e171000 to 0x000fd9e0
> Copying SMBIOS entry point from 0x7e17c400 to 0x000fd9c0
> Scan for VGA option rom
> EHCI init on dev 00:12.2 (regs=0xfeb08420)
> EHCI init on dev 00:13.2 (regs=0xfeb08520)
> OHCI init on dev 00:14.5 (regs=0xfeb06000)
> EHCI init on dev 00:16.2 (regs=0xfeb08620)
> Found 1 lpt ports
> Found 1 serial ports
> ATA controller 1 at 1f0/3f4/4010 (irq 14 dev a1)
> ATA controller 2 at 170/374/4018 (irq 15 dev a1)
> AHCI controller at 11.0, iobase feb08000, irq 0
> Searching bootorder for: /rom@img/sortbootorder
> Searching bootorder for: /rom@img/memtest
> Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
> AHCI/0: registering: "AHCI/0: SuperSSpeed S238 16GB ATA-7 Hard-Disk
> (15258 MiBytes)"
> Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0
> Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1
> USB MSC vendor='Multiple' product='Card  Reader' rev='1.00' type=0
> removable=1
> Searching bootorder for: /pci@i0cf8/usb@12,2/storage@1/*@0/*@0,0
> Searching bootorder for: /pci@i0cf8/usb@12,2/usb-*@1
> USB MSC vendor='Lexar' product='JD FireFly' rev='1100' type=0
> removable=1
> USB MSC blksize=512 sectors=7831552
> USB MSC blksize=512 sectors=7995392
> All threads complete.
> Scan for option roms
> Press F12 for boot menu.
>
> Select boot device:
>
> 1. USB MSC Drive Multiple Card  Reader 1.00
> 2. USB MSC Drive Lexar JD FireFly 1100
> 3. AHCI/0: SuperSSpeed S238 16GB ATA-7 Hard-Disk (15258 MiByte
> 4. Payload [sortbootorder]
> 5. Payload [memtest]
>
> drive 0x000fd8d0: PCHS=0/0/0 translation=lba LCHS=971/128/63 s=7831552
> drive 0x000fd900: PCHS=0/0/0 translation=lba LCHS=991/128/63 s=7995392
> drive 0x000fd930: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
> s=31248704
> Space available for UMB: 000c0000-000ee000
> Returned 49152 bytes of ZoneHigh
> e820 map has 6 items:
>  0: 0000000000000000 - 000000000009fc00 = 1 RAM
>  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
>  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
>  3: 0000000000100000 - 000000007e16ac00 = 1 RAM
>  4: 000000007e16ac00 - 000000007efffc00 = 2 RESERVED
>  5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED
> enter handle_19:
>  NULL
> Booting from Hard Disk...
> Booting from 0000:7c00
> Using drive 0, partition 3.
> Loading.....
> probing: pc0 com0 apm pci mem[639K 2016M a20=on]
> disk: hd0+ hd1+ hd2*
>>> OpenBSD/i386 BOOT 3.21
> boot> stty com0 115200
> boot> set tty com0
> switching console to com0
>
>
>
> ############ dmesg capture:
>
> switching console to com0
>                          òzÁ¹  M½i386 BOOT 3.21
> boot> boot bsd.rd.amd64.snapshot
> booting hd0a:bsd.rd.amd64.snapshot: 3118100+960644+2897040+0+528720
> [80+338136+2                                                            
>                           19474]=0xbb16d0
> entry point at 0x10001e0
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>        The Regents of the University of California.  All rights
>        reserved.
> Copyright (c) 1995-2013 OpenBSD. All rights reserved.
> http://www.OpenBSD.org
>
> OpenBSD 5.4-current (RAMDISK_CD) #147: Mon Dec  9 16:39:35 MST 2013
>    [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> RTC BIOS diagnostic error
> ff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
> real mem = 2098634752 (2001MB)
> avail mem = 2037907456 (1943MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7e17c420 (6 entries)
> bios0: vendor coreboot version
> "EDK_2.08.00_20130410_221-1434-g871c820-dirty" date 08/20/2013
> bios0: PC Engines APU
> acpi0 at bios0: rev 0, ACPI control unavailable
> mpbios at bios0 not configured
> cpu0 at mainbus0: (uniprocessor)
> cpu0: AMD G-T40N Processor, 1000.13 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
> cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB
> 64b/line 16-way L2 cache
> cpu0: 8 4MB entries fully associative
> cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully
> associative
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
> ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00
> pci1 at ppb0 bus 1
> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: couldn't map
> interrupt
> ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00
> pci2 at ppb1 bus 2
> re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: couldn't map
> interrupt
> ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00
> pci3 at ppb2 bus 3
> re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: couldn't map
> interrupt
> ppb3 at pci0 dev 7 function 0 "AMD AMD64 14h PCIE" rev 0x00
> pci4 at ppb3 bus 4
> athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: can't map
> interrupt
> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: unable to map
> interrupt
> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: couldn't map
> interrupt
> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: couldn't map
> interrupt
> ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: couldn't map
> interrupt
> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: couldn't map
> interrupt
> "ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured
> pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> "ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured
> ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
> pci5 at ppb4 bus 5
> ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: couldn't map
> interrupt
> ppb5 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
> pci6 at ppb5 bus 6
> ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: couldn't map
> interrupt
> ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: couldn't map
> interrupt
> pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
> pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
> pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
> pchb4 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
> pchb5 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
> pchb6 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
> pchb7 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
> pchb8 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
> isa0 at mainbus0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> softraid0 at root
> scsibus0 at softraid0: 256 targets
> root on rd0a swap on rd0b dump on rd0b
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
>
> Welcome to the OpenBSD/amd64 5.4 installation program.
> (I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
>
>
>
> --
> Byron Klippert      
>  [hidden email]
>  c. 867-336-1306

Reply | Threaded
Open this post in threaded view
|

Re: PC Engines apu.1b system board dmesg

Byron Klippert
Question to the developers. Based on the dmesg below what would be a
good starting point for a noob to start poking around with driver
development.


Or better yet... anyone want this board to hack on?


- Byron


On Tue, Dec 17, 2013, at 3:21, emigrant wrote:

> Wow new Alix, cant wait :)
>
> On 16 Dec 2013, at 22:19, Byron Klippert <[hidden email]> wrote:
>
> > http://pcengines.ch/apu.htm
> >
> >
> > Introduction: Thank you for taking the time to test our first round
> > prototypes of the new apu system board. Since this is a prototype, there
> > are a few bugs... Use at your own risk, don't use these boards for
> > anything critical.
> >
> >
> > ############ BIOS boot capture:
> >
> > coreboot-EDK_2.08.00_20130410_221-1434-g871c820-dirty Tue Aug 20
> > 15:46:42 MDT 2013 booting...
> > PCI: Left over static devices:
> > PCI: 00:15.1
> > PCI: 00:15.2
> > PCI: 00:15.3
> > PCI: Check your devicetree.cb.
> > APIC: 00 missing read_resources
> > APIC: 01 missing read_resources
> > Start bios (version ?-20130820_154629-owner-HP)
> > CPU Mhz=1001
> > Found 30 PCI devices (max PCI bus is 06)
> > Found 2 cpu(s) max supported 2 cpu(s)
> > Copying PIR from 0x7e16f000 to 0x000fdb40
> > Copying MPTABLE from 0x7e170000/7e170010 to 0x000fda00
> > Copying ACPI RSDP from 0x7e171000 to 0x000fd9e0
> > Copying SMBIOS entry point from 0x7e17c400 to 0x000fd9c0
> > Scan for VGA option rom
> > EHCI init on dev 00:12.2 (regs=0xfeb08420)
> > EHCI init on dev 00:13.2 (regs=0xfeb08520)
> > OHCI init on dev 00:14.5 (regs=0xfeb06000)
> > EHCI init on dev 00:16.2 (regs=0xfeb08620)
> > Found 1 lpt ports
> > Found 1 serial ports
> > ATA controller 1 at 1f0/3f4/4010 (irq 14 dev a1)
> > ATA controller 2 at 170/374/4018 (irq 15 dev a1)
> > AHCI controller at 11.0, iobase feb08000, irq 0
> > Searching bootorder for: /rom@img/sortbootorder
> > Searching bootorder for: /rom@img/memtest
> > Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
> > AHCI/0: registering: "AHCI/0: SuperSSpeed S238 16GB ATA-7 Hard-Disk
> > (15258 MiBytes)"
> > Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0
> > Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1
> > USB MSC vendor='Multiple' product='Card  Reader' rev='1.00' type=0
> > removable=1
> > Searching bootorder for: /pci@i0cf8/usb@12,2/storage@1/*@0/*@0,0
> > Searching bootorder for: /pci@i0cf8/usb@12,2/usb-*@1
> > USB MSC vendor='Lexar' product='JD FireFly' rev='1100' type=0
> > removable=1
> > USB MSC blksize=512 sectors=7831552
> > USB MSC blksize=512 sectors=7995392
> > All threads complete.
> > Scan for option roms
> > Press F12 for boot menu.
> >
> > Select boot device:
> >
> > 1. USB MSC Drive Multiple Card  Reader 1.00
> > 2. USB MSC Drive Lexar JD FireFly 1100
> > 3. AHCI/0: SuperSSpeed S238 16GB ATA-7 Hard-Disk (15258 MiByte
> > 4. Payload [sortbootorder]
> > 5. Payload [memtest]
> >
> > drive 0x000fd8d0: PCHS=0/0/0 translation=lba LCHS=971/128/63 s=7831552
> > drive 0x000fd900: PCHS=0/0/0 translation=lba LCHS=991/128/63 s=7995392
> > drive 0x000fd930: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
> > s=31248704
> > Space available for UMB: 000c0000-000ee000
> > Returned 49152 bytes of ZoneHigh
> > e820 map has 6 items:
> >  0: 0000000000000000 - 000000000009fc00 = 1 RAM
> >  1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
> >  2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
> >  3: 0000000000100000 - 000000007e16ac00 = 1 RAM
> >  4: 000000007e16ac00 - 000000007efffc00 = 2 RESERVED
> >  5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED
> > enter handle_19:
> >  NULL
> > Booting from Hard Disk...
> > Booting from 0000:7c00
> > Using drive 0, partition 3.
> > Loading.....
> > probing: pc0 com0 apm pci mem[639K 2016M a20=on]
> > disk: hd0+ hd1+ hd2*
> >>> OpenBSD/i386 BOOT 3.21
> > boot> stty com0 115200
> > boot> set tty com0
> > switching console to com0
> >
> >
> >
> > ############ dmesg capture:
> >
> > switching console to com0
> >                          òzÁ¹  M½i386 BOOT 3.21
> > boot> boot bsd.rd.amd64.snapshot
> > booting hd0a:bsd.rd.amd64.snapshot: 3118100+960644+2897040+0+528720
> > [80+338136+2                                                            
> >                           19474]=0xbb16d0
> > entry point at 0x10001e0
> > Copyright (c) 1982, 1986, 1989, 1991, 1993
> >        The Regents of the University of California.  All rights
> >        reserved.
> > Copyright (c) 1995-2013 OpenBSD. All rights reserved.
> > http://www.OpenBSD.org
> >
> > OpenBSD 5.4-current (RAMDISK_CD) #147: Mon Dec  9 16:39:35 MST 2013
> >    [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> > RTC BIOS diagnostic error
> > ff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
> > real mem = 2098634752 (2001MB)
> > avail mem = 2037907456 (1943MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7e17c420 (6 entries)
> > bios0: vendor coreboot version
> > "EDK_2.08.00_20130410_221-1434-g871c820-dirty" date 08/20/2013
> > bios0: PC Engines APU
> > acpi0 at bios0: rev 0, ACPI control unavailable
> > mpbios at bios0 not configured
> > cpu0 at mainbus0: (uniprocessor)
> > cpu0: AMD G-T40N Processor, 1000.13 MHz
> > cpu0:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
> > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB
> > 64b/line 16-way L2 cache
> > cpu0: 8 4MB entries fully associative
> > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully
> > associative
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
> > ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00
> > pci1 at ppb0 bus 1
> > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: couldn't map
> > interrupt
> > ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00
> > pci2 at ppb1 bus 2
> > re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: couldn't map
> > interrupt
> > ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00
> > pci3 at ppb2 bus 3
> > re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: couldn't map
> > interrupt
> > ppb3 at pci0 dev 7 function 0 "AMD AMD64 14h PCIE" rev 0x00
> > pci4 at ppb3 bus 4
> > athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: can't map
> > interrupt
> > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: unable to map
> > interrupt
> > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: couldn't map
> > interrupt
> > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: couldn't map
> > interrupt
> > ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: couldn't map
> > interrupt
> > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: couldn't map
> > interrupt
> > "ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured
> > pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel
> > 0 configured to compatibility, channel 1 configured to compatibility
> > "ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured
> > ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
> > pci5 at ppb4 bus 5
> > ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: couldn't map
> > interrupt
> > ppb5 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
> > pci6 at ppb5 bus 6
> > ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: couldn't map
> > interrupt
> > ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: couldn't map
> > interrupt
> > pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
> > pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
> > pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
> > pchb4 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
> > pchb5 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
> > pchb6 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
> > pchb7 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
> > pchb8 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
> > isa0 at mainbus0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > com0: console
> > softraid0 at root
> > scsibus0 at softraid0: 256 targets
> > root on rd0a swap on rd0b dump on rd0b
> > erase ^?, werase ^W, kill ^U, intr ^C, status ^T
> >
> > Welcome to the OpenBSD/amd64 5.4 installation program.
> > (I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
> >
> >
> >
> > --
> > Byron Klippert      
> >  [hidden email]
> >  c. 867-336-1306
> >
>


--
Byron Klippert      
  [hidden email]
  c. 867-336-1306

Reply | Threaded
Open this post in threaded view
|

Re: PC Engines apu.1b system board dmesg

Byron Klippert
In reply to this post by Byron Klippert
Updated dmesg(s)...


amd64:

OpenBSD 5.4-current (RAMDISK_CD) #167: Fri Dec 27 22:40:53 MST 2013
    [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error
ff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
real mem = 2098634752 (2001MB)
avail mem = 2037903360 (1943MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7e17c420 (6 entries)
bios0: vendor coreboot version
"EDK_2.08.00_20130410_221-1434-g871c820-dirty" date 08/20/2013
bios0: PC Engines APU
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S2 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC HEST SSDT SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGPB)
acpiprt2 at acpi0: bus -1 (PBR2)
acpiprt3 at acpi0: bus 1 (PBR4)
acpiprt4 at acpi0: bus 2 (PBR5)
acpiprt5 at acpi0: bus 3 (PBR6)
acpiprt6 at acpi0: bus 4 (PBR7)
acpiprt7 at acpi0: bus -1 (PBR9)
acpiprt8 at acpi0: bus -1 (PBRA)
acpiprt9 at acpi0: bus 6 (PE20)
acpiprt10 at acpi0: bus -1 (PE21)
acpiprt11 at acpi0: bus -1 (PE22)
acpiprt12 at acpi0: bus -1 (PE23)
acpiprt13 at acpi0: bus 5 (PIBR)
mpbios at bios0 not configured
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD G-T40N Processor, 1000.15 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully
associative
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00pci_intr_map:
bad interrupt line 16

pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06pci_intr_map: bad
interrupt line 16
: couldn't map interrupt
ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00pci_intr_map:
bad interrupt line 17

pci2 at ppb1 bus 2
re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06pci_intr_map: bad
interrupt line 17
: couldn't map interrupt
ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00pci_intr_map:
bad interrupt line 18

pci3 at ppb2 bus 3
re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06pci_intr_map: bad
interrupt line 18
: couldn't map interrupt
ppb3 at pci0 dev 7 function 0 "AMD AMD64 14h PCIE" rev 0x00pci_intr_map:
bad interrupt line 19

pci4 at ppb3 bus 4
athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: can't map
interrupt
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40pci_intr_map:
bad interrupt line 19
: unable to map interrupt
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00pci_intr_map:
bad interrupt line 18
: couldn't map interrupt
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00pci_intr_map:
bad interrupt line 17
: couldn't map interrupt
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00pci_intr_map:
bad interrupt line 18
: couldn't map interrupt
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00pci_intr_map:
bad interrupt line 17
: couldn't map interrupt
"ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
"ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured
ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci5 at ppb4 bus 5
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00pci_intr_map:
bad interrupt line 18
: couldn't map interrupt
ppb5 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
pci6 at ppb5 bus 6
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00pci_intr_map:
bad interrupt line 18
: couldn't map interrupt
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00pci_intr_map:
bad interrupt line 17
: couldn't map interrupt
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb6 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb7 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb8 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
softraid0 at root
scsibus0 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b



i386:

OpenBSD 5.4-current (RAMDISK_CD) #154: Fri Dec 27 10:46:12 MST 2013
    [hidden email]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
RTC BIOS diagnostic error
ff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
cpu0: AMD G-T40N Processor ("AuthenticAMD" 686-class, 512KB L2 cache)
1.01 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,NXE,MMXX,FFXSR,LONG,SSE3,MWAIT,SSSE3,CX16,POPCNT,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,WDT,ITSC
real mem  = 2114949120 (2016MB)
avail mem = 2073145344 (1977MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/23/99, BIOS32 rev. 0 @ 0xff046,
SMBIOS rev. 2.7 @ 0x7e17c420 (6 entries)
bios0: vendor coreboot version
"EDK_2.08.00_20130410_221-1434-g871c820-dirty" date 08/20/2013
bios0: PC Engines APU
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S2 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC HEST SSDT SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGPB)
acpiprt2 at acpi0: bus -1 (PBR2)
acpiprt3 at acpi0: bus 1 (PBR4)
acpiprt4 at acpi0: bus 2 (PBR5)
acpiprt5 at acpi0: bus 3 (PBR6)
acpiprt6 at acpi0: bus 4 (PBR7)
acpiprt7 at acpi0: bus -1 (PBR9)
acpiprt8 at acpi0: bus -1 (PBRA)
acpiprt9 at acpi0: bus 6 (PE20)
acpiprt10 at acpi0: bus -1 (PE21)
acpiprt11 at acpi0: bus -1 (PE22)
acpiprt12 at acpi0: bus -1 (PE23)
acpiprt13 at acpi0: bus 5 (PIBR)
mpbios at bios0 function 0x0 not configured
bios0: ROM list: 0xc0000/0xa00 0xee000/0x2000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00pci_intr_map:
bad interrupt line 16

pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06pci_intr_map: bad
interrupt line 16
: couldn't map interrupt
ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00pci_intr_map:
bad interrupt line 17

pci2 at ppb1 bus 2
re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06pci_intr_map: bad
interrupt line 17
: couldn't map interrupt
ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00pci_intr_map:
bad interrupt line 18

pci3 at ppb2 bus 3
re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06pci_intr_map: bad
interrupt line 18
: couldn't map interrupt
ppb3 at pci0 dev 7 function 0 "AMD AMD64 14h PCIE" rev 0x00pci_intr_map:
bad interrupt line 19

pci4 at ppb3 bus 4
athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: can't map
interrupt
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40pci_intr_map:
bad interrupt line 19
: unable to map interrupt
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00pci_intr_map:
bad interrupt line 18
: couldn't map interrupt
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00pci_intr_map:
bad interrupt line 17
: couldn't map interrupt
ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00pci_intr_map:
bad interrupt line 18
: couldn't map interrupt
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00pci_intr_map:
bad interrupt line 17
: couldn't map interrupt
"ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel
0 configured to compatibility, channel 1 configured to compatibility
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x40
ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
pci5 at ppb4 bus 5
ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00pci_intr_map:
bad interrupt line 18
: couldn't map interrupt
ppb5 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
pci6 at ppb5 bus 6
ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00pci_intr_map:
bad interrupt line 18
: couldn't map interrupt
ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00pci_intr_map:
bad interrupt line 17
: couldn't map interrupt
pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
pchb4 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
pchb6 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
pchb7 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
pchb8 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fdc0: drive 0: unknown device type 0xf0
fd0 at fdc0 drive 0: density unknown
fdc0: drive 1: unknown device type 0xf0
fd1 at fdc0 drive 1: density unknown
softraid0 at root
scsibus0 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b



On Mon, Dec 16, 2013, at 13:19, Byron Klippert wrote:

> http://pcengines.ch/apu.htm
>
>
> Introduction: Thank you for taking the time to test our first round
> prototypes of the new apu system board. Since this is a prototype, there
> are a few bugs... Use at your own risk, don't use these boards for
> anything critical.
>
>
> ############ BIOS boot capture:
>
> coreboot-EDK_2.08.00_20130410_221-1434-g871c820-dirty Tue Aug 20
> 15:46:42 MDT 2013 booting...
> PCI: Left over static devices:
> PCI: 00:15.1
> PCI: 00:15.2
> PCI: 00:15.3
> PCI: Check your devicetree.cb.
> APIC: 00 missing read_resources
> APIC: 01 missing read_resources
> Start bios (version ?-20130820_154629-owner-HP)
> CPU Mhz=1001
> Found 30 PCI devices (max PCI bus is 06)
> Found 2 cpu(s) max supported 2 cpu(s)
> Copying PIR from 0x7e16f000 to 0x000fdb40
> Copying MPTABLE from 0x7e170000/7e170010 to 0x000fda00
> Copying ACPI RSDP from 0x7e171000 to 0x000fd9e0
> Copying SMBIOS entry point from 0x7e17c400 to 0x000fd9c0
> Scan for VGA option rom
> EHCI init on dev 00:12.2 (regs=0xfeb08420)
> EHCI init on dev 00:13.2 (regs=0xfeb08520)
> OHCI init on dev 00:14.5 (regs=0xfeb06000)
> EHCI init on dev 00:16.2 (regs=0xfeb08620)
> Found 1 lpt ports
> Found 1 serial ports
> ATA controller 1 at 1f0/3f4/4010 (irq 14 dev a1)
> ATA controller 2 at 170/374/4018 (irq 15 dev a1)
> AHCI controller at 11.0, iobase feb08000, irq 0
> Searching bootorder for: /rom@img/sortbootorder
> Searching bootorder for: /rom@img/memtest
> Searching bootorder for: /pci@i0cf8/*@11/drive@0/disk@0
> AHCI/0: registering: "AHCI/0: SuperSSpeed S238 16GB ATA-7 Hard-Disk
> (15258 MiBytes)"
> Searching bootorder for: /pci@i0cf8/usb@16,2/storage@1/*@0/*@0,0
> Searching bootorder for: /pci@i0cf8/usb@16,2/usb-*@1
> USB MSC vendor='Multiple' product='Card  Reader' rev='1.00' type=0
> removable=1
> Searching bootorder for: /pci@i0cf8/usb@12,2/storage@1/*@0/*@0,0
> Searching bootorder for: /pci@i0cf8/usb@12,2/usb-*@1
> USB MSC vendor='Lexar' product='JD FireFly' rev='1100' type=0
> removable=1
> USB MSC blksize=512 sectors=7831552
> USB MSC blksize=512 sectors=7995392
> All threads complete.
> Scan for option roms
> Press F12 for boot menu.
>
> Select boot device:
>
> 1. USB MSC Drive Multiple Card  Reader 1.00
> 2. USB MSC Drive Lexar JD FireFly 1100
> 3. AHCI/0: SuperSSpeed S238 16GB ATA-7 Hard-Disk (15258 MiByte
> 4. Payload [sortbootorder]
> 5. Payload [memtest]
>
> drive 0x000fd8d0: PCHS=0/0/0 translation=lba LCHS=971/128/63 s=7831552
> drive 0x000fd900: PCHS=0/0/0 translation=lba LCHS=991/128/63 s=7995392
> drive 0x000fd930: PCHS=16383/16/63 translation=lba LCHS=1024/255/63
> s=31248704
> Space available for UMB: 000c0000-000ee000
> Returned 49152 bytes of ZoneHigh
> e820 map has 6 items:
>   0: 0000000000000000 - 000000000009fc00 = 1 RAM
>   1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED
>   2: 00000000000f0000 - 0000000000100000 = 2 RESERVED
>   3: 0000000000100000 - 000000007e16ac00 = 1 RAM
>   4: 000000007e16ac00 - 000000007efffc00 = 2 RESERVED
>   5: 00000000f8000000 - 00000000f9000000 = 2 RESERVED
> enter handle_19:
>   NULL
> Booting from Hard Disk...
> Booting from 0000:7c00
> Using drive 0, partition 3.
> Loading.....
> probing: pc0 com0 apm pci mem[639K 2016M a20=on]
> disk: hd0+ hd1+ hd2*
> >> OpenBSD/i386 BOOT 3.21
> boot> stty com0 115200
> boot> set tty com0
> switching console to com0
>
>
>
> ############ dmesg capture:
>
> switching console to com0
>                           òzÁ¹  M½i386 BOOT 3.21
> boot> boot bsd.rd.amd64.snapshot
> booting hd0a:bsd.rd.amd64.snapshot: 3118100+960644+2897040+0+528720
> [80+338136+2                                                            
>                            19474]=0xbb16d0
> entry point at 0x10001e0
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>         The Regents of the University of California.  All rights
>         reserved.
> Copyright (c) 1995-2013 OpenBSD. All rights reserved.
> http://www.OpenBSD.org
>
> OpenBSD 5.4-current (RAMDISK_CD) #147: Mon Dec  9 16:39:35 MST 2013
>     [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> RTC BIOS diagnostic error
> ff<clock_battery,ROM_cksum,config_unit,memory_size,fixed_disk,invalid_time>
> real mem = 2098634752 (2001MB)
> avail mem = 2037907456 (1943MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7e17c420 (6 entries)
> bios0: vendor coreboot version
> "EDK_2.08.00_20130410_221-1434-g871c820-dirty" date 08/20/2013
> bios0: PC Engines APU
> acpi0 at bios0: rev 0, ACPI control unavailable
> mpbios at bios0 not configured
> cpu0 at mainbus0: (uniprocessor)
> cpu0: AMD G-T40N Processor, 1000.13 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,SSSE3,CX16,POPCNT,NXE,MMXX,FFXSR,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,IBS,SKINIT,ITSC
> cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 512KB
> 64b/line 16-way L2 cache
> cpu0: 8 4MB entries fully associative
> cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully
> associative
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD AMD64 14h Host" rev 0x00
> ppb0 at pci0 dev 4 function 0 "AMD AMD64 14h PCIE" rev 0x00
> pci1 at ppb0 bus 1
> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x06: couldn't map
> interrupt
> ppb1 at pci0 dev 5 function 0 "AMD AMD64 14h PCIE" rev 0x00
> pci2 at ppb1 bus 2
> re1 at pci2 dev 0 function 0 "Realtek 8168" rev 0x06: couldn't map
> interrupt
> ppb2 at pci0 dev 6 function 0 "AMD AMD64 14h PCIE" rev 0x00
> pci3 at ppb2 bus 3
> re2 at pci3 dev 0 function 0 "Realtek 8168" rev 0x06: couldn't map
> interrupt
> ppb3 at pci0 dev 7 function 0 "AMD AMD64 14h PCIE" rev 0x00
> pci4 at ppb3 bus 4
> athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: can't map
> interrupt
> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x40: unable to map
> interrupt
> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: couldn't map
> interrupt
> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: couldn't map
> interrupt
> ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: couldn't map
> interrupt
> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: couldn't map
> interrupt
> "ATI SBx00 SMBus" rev 0x42 at pci0 dev 20 function 0 not configured
> pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x40: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> "ATI SB700 ISA" rev 0x40 at pci0 dev 20 function 3 not configured
> ppb4 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x40
> pci5 at ppb4 bus 5
> ohci2 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: couldn't map
> interrupt
> ppb5 at pci0 dev 21 function 0 "ATI SB800 PCIE" rev 0x00
> pci6 at ppb5 bus 6
> ohci3 at pci0 dev 22 function 0 "ATI SB700 USB" rev 0x00: couldn't map
> interrupt
> ehci2 at pci0 dev 22 function 2 "ATI SB700 USB2" rev 0x00: couldn't map
> interrupt
> pchb1 at pci0 dev 24 function 0 "AMD AMD64 14h Link Cfg" rev 0x43
> pchb2 at pci0 dev 24 function 1 "AMD AMD64 14h Address Map" rev 0x00
> pchb3 at pci0 dev 24 function 2 "AMD AMD64 14h DRAM Cfg" rev 0x00
> pchb4 at pci0 dev 24 function 3 "AMD AMD64 14h Misc Cfg" rev 0x00
> pchb5 at pci0 dev 24 function 4 "AMD AMD64 14h CPU Power" rev 0x00
> pchb6 at pci0 dev 24 function 5 "AMD AMD64 14h Reserved" rev 0x00
> pchb7 at pci0 dev 24 function 6 "AMD AMD64 14h NB Power" rev 0x00
> pchb8 at pci0 dev 24 function 7 "AMD AMD64 14h Reserved" rev 0x00
> isa0 at mainbus0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> softraid0 at root
> scsibus0 at softraid0: 256 targets
> root on rd0a swap on rd0b dump on rd0b
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
>
> Welcome to the OpenBSD/amd64 5.4 installation program.
> (I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
>
>
>
> --
> Byron Klippert      
>   [hidden email]
>   c. 867-336-1306
>


--
Byron Klippert      
  [hidden email]
  c. 867-336-1306

Reply | Threaded
Open this post in threaded view
|

Re: PC Engines apu.1b system board dmesg

Theo de Raadt
In reply to this post by Byron Klippert
It would be really nice if someone can get one of those systems to us
in the next two weeks.  If you are able to offer, please make sure you
tell us where you are so that we can pick the right person.

If we get one, we'll make it shine.