[PATCH] Add basic fan control support to smu

Previous Topic Next Topic
classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view

[PATCH] Add basic fan control support to smu

Dominic Marks

I bought a PowerMac8,1 and added this support, based on what I found in
tda(4). It's been lightly tested but it seems to work okay so far. One
thing I've noticed is that while the fan speeds are set independently
hw.sensors.smu0.fanX always shows a common value. I've not looked into that
further. Patch linked below because I believe Gmail will consume the tabs