Openbsd broke my hard drive twice! Getting frustrated

classic Classic list List threaded Threaded
63 messages Options
1234
Reply | Threaded
Open this post in threaded view
|

Re: Openbsd broke my hard drive twice! Getting frustrated

Christoph Viethen-2
Hello,

on 04.05.2016 05:30, Gabriel Guzman wrote:

> I figured out the issue.  On my machine (DEL XPS 13) it was the "Intel
> Rapid Boot" option in BIOS.  Disabling that resolved all my boot issues.
> I can now boot with MBR or GPT off the internal SSD.  And, I can also
> access the BIOS with the internal SSD installed in the system (this was
> not possible before)

Ooouuhh ... Intel Rapid Start still messing up machines?

There was a well-publicised series of problems with a number of
ThinkPad models (T440p and many relatives) around the end of 2013 /
early 2014. If I recall correctly, one needed to turn off some sort of
UEFI mode (which disabled Intel Rapid Start at the same time) to
prevent bricking the mainboard when installing OSs which were not
sufficiently micro and soft. Seemed that the "feature" would read some
data from a particular area of the harddisk, expecting that "the right
data"(tm) would be there (why verify input, right?), and then just
flash it to NVRAM.

I'm aware your problem may be related to a different phenomenon. Just
meaning to say: Lenovo (and probably other large vendors as well)
released BIOS updates during 2014 to fix some rather nasty Intel Rapid
Start issues, so in case your machine is of sufficient age, you might
like to look into this.


Hope it helps ...

   Christoph

--
  [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: Openbsd broke my hard drive twice! Getting frustrated

Gabriel Guzman-2
On 05/04, Christoph Viethen wrote:

> Hello,
>
> on 04.05.2016 05:30, Gabriel Guzman wrote:
>
> > I figured out the issue.  On my machine (DEL XPS 13) it was the "Intel
> > Rapid Boot" option in BIOS.  Disabling that resolved all my boot issues.
> > I can now boot with MBR or GPT off the internal SSD.  And, I can also
> > access the BIOS with the internal SSD installed in the system (this was
> > not possible before)
>
> Ooouuhh ... Intel Rapid Start still messing up machines?
>
> I'm aware your problem may be related to a different phenomenon. Just
> meaning to say: Lenovo (and probably other large vendors as well) released
> BIOS updates during 2014 to fix some rather nasty Intel Rapid Start issues,
> so in case your machine is of sufficient age, you might like to look into
> this.

Thanks for the info!  Yeah, my machine is from right around then. My
BIOS version is from 2014, so it's possible this was fixed with a BIOS
update.

Thanks,
gabe.

Reply | Threaded
Open this post in threaded view
|

Re: Openbsd broke my hard drive twice! Getting frustrated

Gabriel Guzman-2
In reply to this post by Andrew Gwozdziewycz
On 05/04, Andrew Gwozdziewycz wrote:
> Hi Gabe,
>
> I found it possible to boot and install 5.9 on an XPS 13" (9333)[0], but
> had problems getting the all important suspend to RAM (or anything which
> allowed me to close the lid and reopen to resume work) to work. Were you
> successful in getting this necessary laptop functionality working correctly?
>
> If so, would you mind sharing your configs? I'd love to reinstall OpenBSD
> on this machine, but can't sacrifice that.

Hi Andrew --

Suspend just works for me.  No config necessary.  I just made sure apmd
was running and then either typing zzz, or closing the lid suspends the
machine and opening it wakes it back up. Maybe it was an issue that has
since been fixed?  My machine is also an XPS 13 9333. dmesg included for
good measuere.

gabe.


OpenBSD 5.9-current (GENERIC.MP) #2002: Sun May  1 06:35:58 MDT 2016
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8474284032 (8081MB)
avail mem = 8212860928 (7832MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe0fc0 (69 entries)
bios0: vendor Dell Inc. version "A06" date 11/07/2014
bios0: Dell Inc. XPS13 9333
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP ASF! HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT SSDT UEFI POAT BATB FPDT SLIC UEFI SSDT BGRT CSRT
acpi0: wakeup devices P0P1(S4) GLAN(S4) EHC1(S4) EHC2(S4) XHC_(S4) HDEF(S4) TPD4(S4) TPD7(S0) TPD8(S0) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz, 1596.56 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz, 1596.31 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz, 1596.31 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz, 1596.31 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP03)
acpiprt4 at acpi0: bus -1 (PEG0)
acpiprt5 at acpi0: bus -1 (PEG1)
acpiprt6 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@332 mwait.1@0x50), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@332 mwait.1@0x50), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@332 mwait.1@0x50), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@332 mwait.1@0x50), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 105 degC
acpitz1 at acpi0: critical temperature is 105 degC
"PNP0C14" at acpi0 not configured
"INT3F0D" at acpi0 not configured
"ACPI0008" at acpi0 not configured
"MSFT0001" at acpi0 not configured
"SYN0608" at acpi0 not configured
dwiic0 at acpi0: I2C1 addr 0xfe105000/0x1000 irq 7
iic0 at dwiic0
ihidev0 at iic0 addr 0x2c irq 39dwiic0: timed out reading remaining 29
, failed fetching initial HID descriptor
"DLL060A" at acpi0 not configured
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "Dell" serial 1727 type LION oem "SIMPLO"
"DELLABCE" at acpi0 not configured
"INT340E" at acpi0 not configured
"INT33A0" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1596 MHz: speeds: 2401, 2400, 2300, 2200, 2000, 1900, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 900, 800, 768 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1920x1080
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Realtek/0x0668
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0x6b, msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 2: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 2 lun 0: <ATA, LITEON IT LMT-12, HM71> SCSI3 0/direct fixed t10.ATA_LITEON_IT_LMT-128L9M-11_MSATA_128GB_TW0921PN5508544A1906
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic1 at ichiic0
iic1: addr 0x29 80=03 81=ad 82=ff 83=ff 8f=02 91=01 92=44 93=11 94=7c 96=64 98=53 9a=4e 9f=14 a0=03 a1=ad a2=ff a3=ff af=02 b1=01 b2=44 b3=11 b4=7c b6=64 b8=53 ba=4e bf=14 c0=03 c1=ad c2=ff c3=ff cf=02 d1=01 d2=44 d3=11 d4=7c d6=64 d8=53 da=4e df=14 e0=14 e1=14 e2=14 e3=14 e4=14 e5=14 e6=14 e7=14 e9=14 ea=14 eb=14 ec=14 ed=14 ee=14 ef=14 f0=14 f1=14 f2=14 f3=14 f4=14 f5=14 f6=14 f7=14 f8=14 f9=14 fa=14 fb=14 fd=14 ff=14 words 00=0000 01=0100 02=0200 03=0300 04=0400 05=0500 06=0600 07=0700
iic1: addr 0x4c 00=2a 01=2f 02=80 04=06 05=55 07=55 0a=06 0b=55 0d=55 10=c0 15=55 19=55 1a=55 1e=5b 20=55 21=0a 22=70 23=28 24=80 25=0f 26=0f 27=12 28=12 29=e0 60=06 70=06 71=07 72=07 a4=6f a5=c0 ac=28 ad=d4 ae=04 af=df b0=20 b1=20 fd=23 fe=5d ff=04 words 00=2aff 01=2fff 02=80ff 03=00ff 04=06ff 05=55ff 06=00ff 07=55ff
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: disable error
pms0: disable error
pms0: disable error
pms0: disable error
pms0: disable error
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
efifb at mainbus0 not configured
error: [drm:pid0:intel_uncore_check_errors] *ERROR* Unclaimed register before interrupt
uhidev0 at uhub0 port 3 configuration 1 interface 0 "SYNAPTICS Synaptics Large Touch Screen" rev 2.00/0.01 addr 2
uhidev0: iclass 3/0, 15 report ids
ums0 at uhidev0 reportid 1: 1 button, tip
wsmouse1 at ums0 mux 0
ums1 at uhidev0 reportid 2: 2 buttons
wsmouse2 at ums1 mux 0
ums2 at uhidev0 reportid 7
ums2: mouse has no X report
uhid0 at uhidev0 reportid 8: input=0, output=0, feature=1
uhid1 at uhidev0 reportid 9: input=0, output=63, feature=0
uhid2 at uhidev0 reportid 10: input=0, output=5, feature=0
uhid3 at uhidev0 reportid 11: input=61, output=0, feature=0
uhid4 at uhidev0 reportid 12: input=1, output=0, feature=0
uhid5 at uhidev0 reportid 15: input=0, output=0, feature=1
uvideo0 at uhub0 port 5 configuration 1 interface 0 "CN0Y2TKG724873CED0DKA00 Integrated_Webcam_HD" rev 2.01/39.02 addr 3
video0 at uvideo0
ugen0 at uhub0 port 6 "Intel product 0x07dc" rev 2.00/0.01 addr 4
uhub2 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (c0be31cb1e50e248.a) swap on sd0b dump on sd0b
iwm0: hw rev 0x140, fw ver 25.228 (API ver 9), address e8:2a:ea:ab:49:24
pckbc: command timeout
pckbc: command timeout
pms0: enable error
pms0: not in sync yet, discard input (state 0)
pckbc: command timeout
pms0: disable error
pckbc: command timeout
pckbc: command timeout
pms0: enable error
pms0: not in sync yet, discard input (state 0)
pckbc: command timeout
pms0: disable error
pckbc: command timeout
pckbc: command timeout
pms0: enable error

hw.sensors.cpu0.temp0=57.00 degC
hw.sensors.acpitz0.temp0=27.80 degC (zone temperature)
hw.sensors.acpitz1.temp0=29.80 degC (zone temperature)
hw.sensors.acpibtn1.indicator0=On (lid open)
hw.sensors.acpiac0.indicator0=Off (power supply)
hw.sensors.acpibat0.volt0=7.40 VDC (voltage)
hw.sensors.acpibat0.volt1=8.16 VDC (current voltage)
hw.sensors.acpibat0.current0=1.67 A (rate)
hw.sensors.acpibat0.amphour0=7.30 Ah (last full capacity)
hw.sensors.acpibat0.amphour1=0.73 Ah (warning capacity)
hw.sensors.acpibat0.amphour2=0.00 Ah (low capacity)
hw.sensors.acpibat0.amphour3=6.26 Ah (remaining capacity), OK
hw.sensors.acpibat0.amphour4=7.56 Ah (design capacity)
hw.sensors.acpibat0.raw0=1 (battery discharging), OK

1234