OpenBSD/i386 3.8 on a Compaq DL380 SMP with GENERIC.MP

classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|

OpenBSD/i386 3.8 on a Compaq DL380 SMP with GENERIC.MP

Bruno Carnazzi
  Hi all,

Everything seems to work fine but OpenBSD find only one CPU ! :(
Somebody know why and how can I use the 2 CPUs ?

Thank you,

Bruno.

Here is the dmesg :

OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 2147049472 (2096728K)
avail mem = 1953083392 (1907308K)
using 4278 buffers containing 107454464 bytes (104936K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4
SouthBridge" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x800
0xe8000/0x6000 0xee000/0x2000!
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
pci1 at pchb1 bus 3
cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: irq 10
Compaq Integrated Array
scsibus0 at cac0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <Compaq, RAID5 volume #, > SCSI2 0/direct fixed
sd0: 69455MB, 17432 cyl, 255 head, 32 sec, 512 bytes/sec, 142245120 sec total
fxp0 at pci0 dev 2 function 0 "Intel 82557" rev 0x08, i82559: irq 11,
address 00:02:a5:29:15:f0
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
xl0 at pci0 dev 5 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5,
address 00:0a:5e:5a:c9:a4
exphy0 at xl0 phy 24: 3Com internal media interface
pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x4f
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask f7c5 netmask ffe5 ttymask ffe7
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD/i386 3.8 on a Compaq DL380 SMP with GENERIC.MP

Marco Fretz
im really not sure, but i think the secound cpu is not found at the same
time in boot process as the first. i had an ibm intellisation with 2
cpus. the sec cpu was listed in dmesg after mounting fs.

you dont see sec cpu in # top?

any one knows thats ok?


On Mon, 2006-01-30 at 12:15 +0400, Bruno Carnazzi wrote:

>   Hi all,
>
> Everything seems to work fine but OpenBSD find only one CPU ! :(
> Somebody know why and how can I use the 2 CPUs ?
>
> Thank you,
>
> Bruno.
>
> Here is the dmesg :
>
> OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005
>     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> real mem  = 2147049472 (2096728K)
> avail mem = 1953083392 (1907308K)
> using 4278 buffers containing 107454464 bytes (104936K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
> pcibios0: PCI BIOS has 7 Interrupt Routing table entries
> pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4
> SouthBridge" rev 0x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x800
> 0xe8000/0x6000 0xee000/0x2000!
> cpu0 at mainbus0: (uniprocessor)
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
> pci1 at pchb1 bus 3
> cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: irq 10
> Compaq Integrated Array
> scsibus0 at cac0: 1 targets
> sd0 at scsibus0 targ 0 lun 0: <Compaq, RAID5 volume #, > SCSI2 0/direct fixed
> sd0: 69455MB, 17432 cyl, 255 head, 32 sec, 512 bytes/sec, 142245120 sec total
> fxp0 at pci0 dev 2 function 0 "Intel 82557" rev 0x08, i82559: irq 11,
> address 00:02:a5:29:15:f0
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
> xl0 at pci0 dev 5 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5,
> address 00:0a:5e:5a:c9:a4
> exphy0 at xl0 phy 24: 3Com internal media interface
> pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x4f
> pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask f7c5 netmask ffe5 ttymask ffe7
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD/i386 3.8 on a Compaq DL380 SMP with GENERIC.MP

Bruno Carnazzi
top show me only one CPU...

load averages:  0.09,  0.11,  0.06                                    
                                                                     
                14:23:20
24 processes:  23 idle, 1 on processor
CPU states:  0.0% user,  0.0% nice,  0.2% system,  2.0% interrupt, 97.8% idle
Memory: Real: 14M/172M act/tot  Free: 1842M  Swap: 0K/299M used/tot

  PID USERNAME PRI NICE  SIZE   RES STATE    WAIT     TIME    CPU COMMAND
 5862 _squid     2    0 4136K 5968K sleep    poll     0:00  0.00% squid
31899 root       2    0 3312K 2120K idle     netio    0:00  0.00% sshd
19342 root       2    0  572K 1092K sleep    poll     0:00  0.00% top
12615 named      2    0 2092K 2344K idle     select   0:00  0.00% named
11338 root      18    0  396K  456K idle     pause    0:00  0.00% ksh
17509 bcarnazz   2    0 3288K 1392K sleep    select   0:00  0.00% sshd
13242 root       2    0 1188K 1132K sleep    select   0:00  0.00% sendmail
 4659 _ntp       2    0  348K  584K sleep    poll     0:00  0.00% ntpd
30535 bcarnazz  18    0  540K  468K sleep    pause    0:00  0.00% ksh
22523 _syslogd   2    0  356K  552K idle     poll     0:00  0.00% syslogd
31515 bcarnazz  28    0  400K 1024K onproc   -        0:00  0.00% top
10975 _squid    -6    0  184K  304K idle     piperd   0:00  0.00% unlinkd
    1 root      10    0  264K  308K idle     wait     0:00  0.00% init
 1079 root       2    0  440K  664K sleep    select   0:00  0.00% cron
26496 root       3    0  248K  524K idle     ttyin    0:00  0.00% getty
 6457 root       3    0  340K  524K idle     ttyin    0:00  0.00% getty
28005 root       3    0  352K  532K idle     ttyin    0:00  0.00% getty
 6209 root       3    0  228K  532K idle     ttyin    0:00  0.00% getty
  148 root       2    0  404K  620K idle     poll     0:00  0.00% ntpd
 3980 root      10    0  864K  568K idle     wait     0:00  0.00% squid
 2756 root       2    0  328K  512K idle     netio    0:00  0.00% syslogd
15677 root       2    0  556K  896K idle     select   0:00  0.00% sshd
 8774 root       2    0  280K  488K idle     select   0:00  0.00% inetd
  882 root       2    0 1476K  532K idle     netio    0:00  0.00% named


On 1/30/06, Marco Fretz <[hidden email]> wrote:

> im really not sure, but i think the secound cpu is not found at the same
> time in boot process as the first. i had an ibm intellisation with 2
> cpus. the sec cpu was listed in dmesg after mounting fs.
>
> you dont see sec cpu in # top?
>
> any one knows thats ok?
>
>
> On Mon, 2006-01-30 at 12:15 +0400, Bruno Carnazzi wrote:
> >   Hi all,
> >
> > Everything seems to work fine but OpenBSD find only one CPU ! :(
> > Somebody know why and how can I use the 2 CPUs ?
> >
> > Thank you,
> >
> > Bruno.
> >
> > Here is the dmesg :
> >
> > OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005
> >     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
> > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> > real mem  = 2147049472 (2096728K)
> > avail mem = 1953083392 (1907308K)
> > using 4278 buffers containing 107454464 bytes (104936K) of memory
> > mainbus0 (root)
> > bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
> > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
> > pcibios0: PCI BIOS has 7 Interrupt Routing table entries
> > pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4
> > SouthBridge" rev 0x00)
> > pcibios0: PCI bus #0 is the last bus
> > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x800
> > 0xe8000/0x6000 0xee000/0x2000!
> > cpu0 at mainbus0: (uniprocessor)
> > cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
> > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
> > pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
> > pci1 at pchb1 bus 3
> > cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: irq 10
> > Compaq Integrated Array
> > scsibus0 at cac0: 1 targets
> > sd0 at scsibus0 targ 0 lun 0: <Compaq, RAID5 volume #, > SCSI2 0/direct fixed
> > sd0: 69455MB, 17432 cyl, 255 head, 32 sec, 512 bytes/sec, 142245120 sec total
> > fxp0 at pci0 dev 2 function 0 "Intel 82557" rev 0x08, i82559: irq 11,
> > address 00:02:a5:29:15:f0
> > inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> > vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
> > xl0 at pci0 dev 5 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5,
> > address 00:0a:5e:5a:c9:a4
> > exphy0 at xl0 phy 24: 3Com internal media interface
> > pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x4f
> > pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
> > atapiscsi0 at pciide0 channel 0 drive 0
> > scsibus1 at atapiscsi0: 2 targets
> > cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom removable
> > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > midi0 at pcppi0: <PC speaker>
> > spkr0 at pcppi0
> > sysbeep0 at pcppi0
> > npx0 at isa0 port 0xf0/16: using exception 16
> > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > biomask f7c5 netmask ffe5 ttymask ffe7
> > pctr: 686-class user-level performance counters enabled
> > mtrr: Pentium Pro MTRR support
> > dkcsum: sd0 matches BIOS drive 0x80
> > root on sd0a
> > rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD/i386 3.8 on a Compaq DL380 SMP with GENERIC.MP

Marco Fretz
ok, its not found =)

i saw something on the bsd.mp kernel page on openbsd.org about not
supported cpus / machines. may your machine is listed there

regards
marco

On Mon, 2006-01-30 at 14:26 +0400, Bruno Carnazzi wrote:

> top show me only one CPU...
>
> load averages:  0.09,  0.11,  0.06                                    
>                                                                      
>                 14:23:20
> 24 processes:  23 idle, 1 on processor
> CPU states:  0.0% user,  0.0% nice,  0.2% system,  2.0% interrupt, 97.8% idle
> Memory: Real: 14M/172M act/tot  Free: 1842M  Swap: 0K/299M used/tot
>
>   PID USERNAME PRI NICE  SIZE   RES STATE    WAIT     TIME    CPU COMMAND
>  5862 _squid     2    0 4136K 5968K sleep    poll     0:00  0.00% squid
> 31899 root       2    0 3312K 2120K idle     netio    0:00  0.00% sshd
> 19342 root       2    0  572K 1092K sleep    poll     0:00  0.00% top
> 12615 named      2    0 2092K 2344K idle     select   0:00  0.00% named
> 11338 root      18    0  396K  456K idle     pause    0:00  0.00% ksh
> 17509 bcarnazz   2    0 3288K 1392K sleep    select   0:00  0.00% sshd
> 13242 root       2    0 1188K 1132K sleep    select   0:00  0.00% sendmail
>  4659 _ntp       2    0  348K  584K sleep    poll     0:00  0.00% ntpd
> 30535 bcarnazz  18    0  540K  468K sleep    pause    0:00  0.00% ksh
> 22523 _syslogd   2    0  356K  552K idle     poll     0:00  0.00% syslogd
> 31515 bcarnazz  28    0  400K 1024K onproc   -        0:00  0.00% top
> 10975 _squid    -6    0  184K  304K idle     piperd   0:00  0.00% unlinkd
>     1 root      10    0  264K  308K idle     wait     0:00  0.00% init
>  1079 root       2    0  440K  664K sleep    select   0:00  0.00% cron
> 26496 root       3    0  248K  524K idle     ttyin    0:00  0.00% getty
>  6457 root       3    0  340K  524K idle     ttyin    0:00  0.00% getty
> 28005 root       3    0  352K  532K idle     ttyin    0:00  0.00% getty
>  6209 root       3    0  228K  532K idle     ttyin    0:00  0.00% getty
>   148 root       2    0  404K  620K idle     poll     0:00  0.00% ntpd
>  3980 root      10    0  864K  568K idle     wait     0:00  0.00% squid
>  2756 root       2    0  328K  512K idle     netio    0:00  0.00% syslogd
> 15677 root       2    0  556K  896K idle     select   0:00  0.00% sshd
>  8774 root       2    0  280K  488K idle     select   0:00  0.00% inetd
>   882 root       2    0 1476K  532K idle     netio    0:00  0.00% named
>
>
> On 1/30/06, Marco Fretz <[hidden email]> wrote:
> > im really not sure, but i think the secound cpu is not found at the same
> > time in boot process as the first. i had an ibm intellisation with 2
> > cpus. the sec cpu was listed in dmesg after mounting fs.
> >
> > you dont see sec cpu in # top?
> >
> > any one knows thats ok?
> >
> >
> > On Mon, 2006-01-30 at 12:15 +0400, Bruno Carnazzi wrote:
> > >   Hi all,
> > >
> > > Everything seems to work fine but OpenBSD find only one CPU ! :(
> > > Somebody know why and how can I use the 2 CPUs ?
> > >
> > > Thank you,
> > >
> > > Bruno.
> > >
> > > Here is the dmesg :
> > >
> > > OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005
> > >     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > > cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
> > > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> > > real mem  = 2147049472 (2096728K)
> > > avail mem = 1953083392 (1907308K)
> > > using 4278 buffers containing 107454464 bytes (104936K) of memory
> > > mainbus0 (root)
> > > bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
> > > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
> > > pcibios0: PCI BIOS has 7 Interrupt Routing table entries
> > > pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4
> > > SouthBridge" rev 0x00)
> > > pcibios0: PCI bus #0 is the last bus
> > > bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x800
> > > 0xe8000/0x6000 0xee000/0x2000!
> > > cpu0 at mainbus0: (uniprocessor)
> > > cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
> > > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
> > > pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> > > pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
> > > pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
> > > pci1 at pchb1 bus 3
> > > cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: irq 10
> > > Compaq Integrated Array
> > > scsibus0 at cac0: 1 targets
> > > sd0 at scsibus0 targ 0 lun 0: <Compaq, RAID5 volume #, > SCSI2 0/direct fixed
> > > sd0: 69455MB, 17432 cyl, 255 head, 32 sec, 512 bytes/sec, 142245120 sec total
> > > fxp0 at pci0 dev 2 function 0 "Intel 82557" rev 0x08, i82559: irq 11,
> > > address 00:02:a5:29:15:f0
> > > inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> > > vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
> > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > > "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
> > > xl0 at pci0 dev 5 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq 5,
> > > address 00:0a:5e:5a:c9:a4
> > > exphy0 at xl0 phy 24: 3Com internal media interface
> > > pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x4f
> > > pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
> > > atapiscsi0 at pciide0 channel 0 drive 0
> > > scsibus1 at atapiscsi0: 2 targets
> > > cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom removable
> > > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> > > isa0 at pcib0
> > > isadma0 at isa0
> > > pckbc0 at isa0 port 0x60/5
> > > pckbd0 at pckbc0 (kbd slot)
> > > pckbc0: using irq 1 for kbd slot
> > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > > pcppi0 at isa0 port 0x61
> > > midi0 at pcppi0: <PC speaker>
> > > spkr0 at pcppi0
> > > sysbeep0 at pcppi0
> > > npx0 at isa0 port 0xf0/16: using exception 16
> > > pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > > pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > > biomask f7c5 netmask ffe5 ttymask ffe7
> > > pctr: 686-class user-level performance counters enabled
> > > mtrr: Pentium Pro MTRR support
> > > dkcsum: sd0 matches BIOS drive 0x80
> > > root on sd0a
> > > rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD/i386 3.8 on a Compaq DL380 SMP with GENERIC.MP

Bill Marquette
In reply to this post by Bruno Carnazzi
On 1/30/06, Bruno Carnazzi <[hidden email]> wrote:

>   Hi all,
>
> Everything seems to work fine but OpenBSD find only one CPU ! :(
> Somebody know why and how can I use the 2 CPUs ?
>
> Thank you,
>
> Bruno.
>
> Here is the dmesg :
<SNIP DMESG>

Works fine here on the DL380G4's  with -current (worked with release
too if I remember correctly).  From your dmesg, this looks like a
first generation box - there's numerous tweaks in the BIOS on these
machines.  Until recently I also had a DL360G1 running 3.7 with both
CPUs recognized - this should be more or less the same hardware you
have.

--Bill

dmesg from DL380G4:
OpenBSD 3.9-beta (GENERIC.MP) #1: Sat Jan 21 13:54:56 CST 2006
    root@isis-external:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2147033088 (2096712K)
avail mem = 1835864064 (1792836K)
using 22937 buffers containing 214913024 bytes (209876K) of memory
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (HP       PROLIANT    )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(TM) CPU 3.40GHz, 3400.56 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu0: 1MB 64b/line 8-way L2 cache
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 6 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.40GHz, 3400.13 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,NXE,LONG
cpu1: 1MB 64b/line 8-way L2 cache
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type PCI
mpbios: bus 4 is type PCI
mpbios: bus 5 is type PCI
mpbios: bus 6 is type PCI
mpbios: bus 10 is type PCI
mpbios: bus 32 is type ISA
ioapic0 at mainbus0 apid 8: pa 0xffff800003741f24, version 20, 24 pins
ioapic1 at mainbus0 apid 9: pa 0xffff800003741e24, version 20, 24 pins
ioapic2 at mainbus0 apid 10: pa 0xffff800003741d24, version 20, 24 pins
ioapic3 at mainbus0 apid 11: pa 0xffff800003741c24, version 20, 24 pins
ioapic4 at mainbus0 apid 12: pa 0xffff800003741b24, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel E7520 MCH" rev 0x0a
ppb0 at pci0 dev 2 function 0 "Intel MCH PCIE" rev 0x0a
pci1 at ppb0 bus 2
ppb1 at pci1 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci2 at ppb1 bus 3
bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 9 int 1 (irq 7), address 00:0f:20:f7:65:89
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 9 int 2 (irq 7), address 00:0f:20:f7:65:88
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
ppb2 at pci1 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 4
ppb3 at pci0 dev 6 function 0 "Intel MCH PCIE" rev 0x0a
pci4 at ppb3 bus 5
ppb4 at pci4 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci5 at ppb4 bus 6
ami0 at pci5 dev 2 function 0 "Symbios Logic MegaRAID" rev 0x01: apic
11 int 6 (irq 7) LSI 520 64b/lhc
ami0: FW 1L19, BIOS v1.04, 64MB RAM
ami0: 1 channels, 0 FC loops, 1 logical drives
scsibus0 at ami0: 40 targets
sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct fixed
sd0: 34731MB, 34731 cyl, 64 head, 32 sec, 512 bytes/sec, 71129088 sec total
scsibus1 at ami0: 16 targets
ppb5 at pci4 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci6 at ppb5 bus 10
ppb6 at pci6 dev 1 function 0 "IBM PCIX-PCIX" rev 0x02
pci7 at ppb6 bus 11
em0 at pci7 dev 4 function 0 "Intel PRO/1000MT QP (82546EB)" rev 0x01:
apic 8 int 7 (irq 7), address 00:04:23:b2:ab:48
em1 at pci7 dev 4 function 1 "Intel PRO/1000MT QP (82546EB)" rev 0x01:
apic 8 int 7 (irq 7), address 00:04:23:b2:ab:49
em2 at pci7 dev 6 function 0 "Intel PRO/1000MT QP (82546EB)" rev 0x01:
apic 8 int 7 (irq 7), address 00:04:23:b2:ab:4a
em3 at pci7 dev 6 function 1 "Intel PRO/1000MT QP (82546EB)" rev 0x01:
apic 8 int 7 (irq 7), address 00:04:23:b2:ab:4b
ppb7 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xc2
pci8 at ppb7 bus 1
vga1 at pci8 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x01 at pci8 dev 4 function 0 not configured
"Compaq iLO" rev 0x01 at pci8 dev 4 function 2 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801EB/ER LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801EB/ER IDE" rev 0x02:
DMA, channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <TEAC, DW-224E-B, C.6F> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD/i386 3.8 on a Compaq DL380 SMP with GENERIC.MP

Steven Surdock
[hidden email] wrote:
> On 1/30/06, Bruno Carnazzi <[hidden email]> wrote:
>>   Hi all,
>>
>> Everything seems to work fine but OpenBSD find only one CPU ! :(
>> Somebody know why and how can I use the 2 CPUs ?
>>
...
>
> Works fine here on the DL380G4's  with -current (worked with release
> too if I remember correctly).  From your dmesg, this looks like a
> first generation box - there's numerous tweaks in the BIOS on these
> machines.  Until recently I also had a DL360G1 running 3.7 with both
> CPUs recognized - this should be more or less the same hardware you
> have.
>
> --Bill

I have two dual DL360-G1's in a FW/CARP config running now.  I ended up
using the Compaq SmartStart CD (or whatever the bootable CD utility is
called) and set the OS to "Linux".  

-Steve S.

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD/i386 3.8 on a Compaq DL380 SMP with GENERIC.MP

Travers Buda
In reply to this post by Bruno Carnazzi
Those compaqs are odd ones at times. Several compaqs of mine have an
option in the BIOS to initialize the CPUs (the docs tell me that if I
change a CPU, it won't work until I use the BIOS feature.)

Poke around in there.

On Monday 30 January 2006 02:15, Bruno Carnazzi wrote:

>   Hi all,
>
> Everything seems to work fine but OpenBSD find only one CPU ! :(
> Somebody know why and how can I use the 2 CPUs ?
>
> Thank you,
>
> Bruno.
>
> Here is the dmesg :
>
> OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005
>    
> [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
>X,FXSR,SSE real mem  = 2147049472 (2096728K)
> avail mem = 1953083392 (1907308K)
> using 4278 buffers containing 107454464 bytes (104936K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @
> 0xf0000 pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
> pcibios0: PCI BIOS has 7 Interrupt Routing table entries
> pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4
> SouthBridge" rev 0x00)
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x800
> 0xe8000/0x6000 0xee000/0x2000!
> cpu0 at mainbus0: (uniprocessor)
> cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MM
>X,FXSR,SSE pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
> pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
> pci1 at pchb1 bus 3
> cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: irq
> 10 Compaq Integrated Array
> scsibus0 at cac0: 1 targets
> sd0 at scsibus0 targ 0 lun 0: <Compaq, RAID5 volume #, > SCSI2
> 0/direct fixed sd0: 69455MB, 17432 cyl, 255 head, 32 sec, 512
> bytes/sec, 142245120 sec total fxp0 at pci0 dev 2 function 0 "Intel
> 82557" rev 0x08, i82559: irq 11, address 00:02:a5:29:15:f0
> inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
> vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> "Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not
> configured xl0 at pci0 dev 5 function 0 "3Com 3c905C 100Base-TX" rev
> 0x78: irq 5, address 00:0a:5e:5a:c9:a4
> exphy0 at xl0 phy 24: 3Com internal media interface
> pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev
> 0x4f pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev
> 0x00: DMA atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom
> removable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> biomask f7c5 netmask ffe5 ttymask ffe7
> pctr: 686-class user-level performance counters enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: sd0 matches BIOS drive 0x80
> root on sd0a
> rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD/i386 3.8 on a Compaq DL380 SMP with GENERIC.MP

Steven Shockley
In reply to this post by Bruno Carnazzi
Bruno Carnazzi wrote:
> Everything seems to work fine but OpenBSD find only one CPU ! :(
> Somebody know why and how can I use the 2 CPUs ?

I have a DL380 G1 (as well as two 1850s) running OpenBSD, works fine
with dual CPUs.  As others mentioned, try changing the OS type to Linux
or Other.

This may also help:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=677558

You may also need the Smartstart CD:

http://h18007.www1.hp.com/support/files/server/us/download/22678.html

Personally I always install the setup partition on G1/tan Compaqs, but
if you keep the SmartStart CD handy you can get away without it.

The firmware CD may also come in handy:

http://h18023.www1.hp.com/support/files/server/us/download/23331.html

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD/i386 3.8 on a Compaq DL380 SMP with GENERIC.MP

Bruno Carnazzi
In reply to this post by Steven Surdock
Thank you guys,

Setting Linux as OS in the BIOS did the trick ! top(1) now reports 2 CPUs.
OS was previously setted at 'Other'.
Is there some stability/performance advantage in upgrading the
Proliant Firmware ?

Here's the new dmesg :

OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real mem  = 2147049472 (2096728K)
avail mem = 1953083392 (1907308K)
using 4278 buffers containing 107454464 bytes (104936K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x2000
pcibios0: PCI BIOS has 7 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:15:0 ("ServerWorks ROSB4
SouthBridge" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x800
0xe8000/0x6000 0xee000/0x2000!
mainbus0: Intel MP Specification (Version 1.4) (COMPAQ   PROLIANT    )
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: apic clock running at 132 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel Pentium III ("GenuineIntel" 686-class) 864 MHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
mainbus0: bus 0 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 9 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 11, 35 pins
ioapic0: misconfigured as apic 0, remapped to apic 8
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x05
pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x05
pci1 at pchb1 bus 3
cac0 at pci0 dev 1 function 0 "Symbios Logic 53c1510" rev 0x02: apic 8
int 10 (irq 10) Compaq Integrated Array
scsibus0 at cac0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <Compaq, RAID5 volume #, > SCSI2 0/direct fixed
sd0: 69455MB, 17432 cyl, 255 head, 32 sec, 512 bytes/sec, 142245120 sec total
fxp0 at pci0 dev 2 function 0 "Intel 82557" rev 0x08, i82559: apic 8
int 11 (irq 11), address 00:02:a5:29:15:f0
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
vga1 at pci0 dev 3 function 0 "ATI Mach64 GV" rev 0x7a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq Netelligent ASMC" rev 0x00 at pci0 dev 4 function 0 not configured
xl0 at pci0 dev 5 function 0 "3Com 3c905C 100Base-TX" rev 0x78: apic 8
int 5 (irq 5)xl0: reset didn't complete
, address 00:0a:5e:5a:c9:a4
exphy0 at xl0 phy 24: 3Com internal media interface
xl0: reset didn't complete
pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x4f
pciide0 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <COMPAQ, CD-224E, 9.0B> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask 0 netmask 0 ttymask 0
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: sd0 matches BIOS drive 0x80
root on sd0a
rootdev=0x400 rrootdev=0xd00 rawdev=0xd02

Bruno.

On 1/30/06, Steven S <[hidden email]> wrote:

> [hidden email] wrote:
> > On 1/30/06, Bruno Carnazzi <[hidden email]> wrote:
> >>   Hi all,
> >>
> >> Everything seems to work fine but OpenBSD find only one CPU ! :(
> >> Somebody know why and how can I use the 2 CPUs ?
> >>
> ...
> >
> > Works fine here on the DL380G4's  with -current (worked with release
> > too if I remember correctly).  From your dmesg, this looks like a
> > first generation box - there's numerous tweaks in the BIOS on these
> > machines.  Until recently I also had a DL360G1 running 3.7 with both
> > CPUs recognized - this should be more or less the same hardware you
> > have.
> >
> > --Bill
>
> I have two dual DL360-G1's in a FW/CARP config running now.  I ended up
> using the Compaq SmartStart CD (or whatever the bootable CD utility is
> called) and set the OS to "Linux".
>
> -Steve S.

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD/i386 3.8 on a Compaq DL380 SMP with GENERIC.MP

Steven Shockley
Bruno Carnazzi wrote:
> Is there some stability/performance advantage in upgrading the
> Proliant Firmware ?

Since it's not on HP's web site (that I can find), here's the firmware
changelog:

Version 2002.12.18B (Contains Bug Fixes)
Enhancements
Added support for Windows Server 2003.
Fixes
Updated to correct an issue where NetWare 6.0 would abend during a
shutdown when the ACPI PSM was installed.

Version 2002.12.18 (Contains Bug Fixes)
Enhancements
Added support for Windows Server 2003.
Fixes
Updated to correct an issue where NetWare 6.0 would abend during a
shutdown when the ACPI PSM was installed.

Version 2002.07.04B (Contains Bug Fixes)
Fixes
Updated the following:
Integration with Novell inter-processor communication.
Disabled Windows Server 2003 EMS by default. User will need to run a
special utility to enable EMS.

Version 2002.02.14B (Contains Bug Fixes)
Fixes
Updated the following:
Changed POST message for PCI Header Type 2 cards to be a warning rather
than a 106 error.
Installation speed of Windows Server 2003.
Resolved issue where the system could not boot from certain DVD drives.

Version 2001.08.04 (Enhancements)
Enhancements
08/04/2001 Maintenance Release

Version 2001.04.02B (Enhancements)
Enhancements
Online Flash Engine
Enhanced flash engine to remove requirement for a system partition on
the target server.

Version 2001.04.02 (Enhancements)
Enhancements
Added support for the latest Intel processors.

Version 2000.11.08A (Enhancements)
Enhancements
Inital release.