OpenBSD don't work on Supermicro 5015M-T ( Intel E7230 chipset )

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view

OpenBSD don't work on Supermicro 5015M-T ( Intel E7230 chipset )

        We have problems on Supermicro 5015M-T server. Kernel started, but hangs  
up after pcibios0: find. We try OpenBSD 3.7, 3.8, and 3.9 snapshot, result  
the same. It's OpenBSD 3.8 (started from floppy "floppy3.8.fs") output :

probing: pc0 com0 mem[628K 509M a20=on]
disk: fd0 hd0+* hd1+*
>> OpenBSD/i386 BOOT 2.10
booting fd0a:/bsd: 3263620+282448=0x361d1c
entry point at 0x100120

Copyright (c) 1982, 1986, 1989, 1991, 1993
         The Regents of the University of California. All rights reserverd.
Copyright (c) 1995-2005 OpenBSD. All rights reserverd.

OpenBSD 3.8 (RAMDISK) #793: Sat Sep 10 16:02:31 MDT 2005
     [hidden email]:/usr/src/sys/arch/i386/compile/RAMDISK
cpu0: Intel(R) Pentium(R) 4 CPU 3.20GHz ("GenuineIntel" 686-class) 3.20 GHz
real mem  = 535265280 (522720K)
avail mem = 484155392 (472808K)
using 4278 buffers containing 26865664 bytes (26236K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(da) BIOS, date 12/14/05, BIOS32 rev. 0 @ 0xfd470
pcibios0 at bios0: rev 2.1 @ 0xfd470/0xb90
pcibios0: PCI BIOS has 20 Interrupt Routing table entries
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GB LPC" rev 0x00)
pcibios0: PCI bus #6 is the last bus

        On this moment kernel hangs up and does nothing. On Linux and FreeBSD  
this server works normaly. Our server specification: Supermicro 5015M-T,  
motherboard PDSMi ( Intel E7230 chipset,  ICH7R SATA controller ), P4  
3.2GHz/800MHz/2Mb, 512MB DDRII 533, 1x 64 PCI-X 133MHz, Dualport  
Intel82573V Gb PCIE Ethernet, ATI Rage XL 8MB PCI graphic, CDROM, Floppy,  
        It's FreeBSD 6 dmesg :

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
     [hidden email]:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <PTLTD          APIC  >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.02-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
   AMD Features=0x20100000<NX,LM>
   Hyperthreading: 2 logical CPUs
real memory  = 535691264 (510 MB)
avail memory = 514863104 (491 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pci2: <base peripheral, interrupt controller> at device 0.1 (no driver  
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port  
0x4000-0x401f mem 0xed200000-0xed21ffff irq 16 at device 0.0 on pc
em0: Ethernet address: 00:30:48:56:75:7a
em0:  Speed:N/A  Duplex:N/A
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <network, ethernet> at device 0.0 (no driver attached)
uhci0: <UHCI (generic) USB controller> port 0x3000-0x301f irq 23 at device  
29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x3020-0x303f irq 19 at device  
29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x3040-0x305f irq 18 at device  
29.2 on pci0
usb2: <UHCI (generic) USB controller> on uhci2usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x3060-0x307f irq 16 at device  
29.3 on pci0
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xed000000-0xed0003ff irq  
23 at device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci10: <ACPI PCI bus> on pcib6
pci10: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port  
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x30a0-0x30af at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA150 controller> port  
0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem  
xed0007ff irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on  
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 3  
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem  
0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 3192024032 Hz quality 800Timecounters tick  
every 1.000 msec
acd0: CDROM <CD-224E-N/1.AA> at ata0-master UDMA33
ad4: 76319MB <Seagate ST3808110AS 3.AAE> at ata2-master SATA150
ad4: Intel calc=ed31a146 meta=f698d0a3
ad6: 76319MB <Seagate ST3808110AS 3.AAE> at ata3-master SATA150
ad6: Intel calc=ed31a146 meta=f698d0a3
ar0: 76316MB <Intel MatrixRAID RAID1> status: READY
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
Trying to mount root from ufs:/dev/ad4s1a
em0: link state changed to UP

Aleksejs Jelisejevs