OpenBSD 5.0 panic on boot Dell R710

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

OpenBSD 5.0 panic on boot Dell R710

Oliver Seufer-2
A complete verbose boot log with "trace" and "show registers" can be downloaded here:
http://www.seufer.de/crash_report.gz

If I can do anything else please let me know.

>Synopsis:      kernel panic during boot on Dell Power Edge R710
>Category:      system i386
>Environment:
        System      : OpenBSD 5.0
        Details     : OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
                         [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC

        Architecture: OpenBSD.i386
        Machine     : i386
>Description:
        During the boot squence the system just stop booting with a panic. The
        system boots fine with OpenBSD 4.9.
>How-To-Repeat:
        Boot OpenBSD 5.0 on Dell Power Edge R710
>Fix:
        Non known

Here are the last messages:
>>> probing for pcic2
>>> probing for pcic2 failed
panic: ioapic1: can't alloc vector for pin 0 at level 60
Stopped at      Debugger+0x4:   popl    %ebp
Debugger(d3f12fc0,d0a1950c,d0be3ed8,d0be3ed4,d3f2ac00) at Debugger+0x4
panic(d07f6905,d3f13c14,0,60,d0a9ecd0) at panic+0x7a
apic_vectorset(d3f13c00,0,60,60,0) at apic_vectorset+0x7b
ioapic_enable(d0a737e4,0,d0be3f98,d035c468,d0b2e1b4) at ioapic_enable+0xb0
cpu_configure(d0b2e1b4,1,3,0,0) at cpu_configure+0x3c
main(d02004ba,d02004c2,0,0,0) at main+0x3ac
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> trace
Debugger(d3f12fc0,d0a1950c,d0be3ed8,d0be3ed4,d3f2ac00) at Debugger+0x4
panic(d07f6905,d3f13c14,0,60,d0a9ecd0) at panic+0x7a
apic_vectorset(d3f13c00,0,60,60,0) at apic_vectorset+0x7b
ioapic_enable(d0a737e4,0,d0be3f98,d035c468,d0b2e1b4) at ioapic_enable+0xb0
cpu_configure(d0b2e1b4,1,3,0,0) at cpu_configure+0x3c
main(d02004ba,d02004c2,0,0,0) at main+0x3ac
ddb> ps
   PID   PPID   PGRP    UID  S       FLAGS  WAIT          COMMAND
*    0     -1      0      0  7       0x200                swapper
ddb> show registers
ds                  0x10
es                  0x10
fs                  0x20
gs                     0
edi                 0x60
esi                0x100
ebp           0xd0be3ea8        end+0xb311c
ebx           0xd07f6905        mpbios_icu_table+0x16d
edx                    0
ecx           0xd0a0d67c        kprintf_mutex
eax                  0x1
eip           0xd049d8fc        Debugger+0x4
cs                   0x8
eflags             0x202
esp           0xd0be3ea8        end+0xb311c
ss                  0x10
Debugger+0x4:   popl    %ebp

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD 5.0 panic on boot Dell R710

Nick Holland
I have just confirmed the Dell Power Edge R710 I have here has no issue,
with either "just barely before release" and -current on both i386 and
amd64, and I've loaded older versions of OpenBSD on older R710s in the past.

I presume this hardware works with some other OS?

Firmware updates?  Some odd BIOS setting?

Nick.

OpenBSD 5.0 (GENERIC.MP) #44: Mon Aug  8 15:02:49 MDT 2011
     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
real mem  = 3476066304 (3315MB)
avail mem = 3409141760 (3251MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/31/11, BIOS32 rev. 0 @ 0xf9be0,
SMBIOS
rev. 2.6 @ 0xcf49c000 (84 entries)
bios0: vendor Dell Inc. version "3.0.0" date 01/31/2011
bios0: Dell Inc. PowerEdge R710
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST
BERT EINJ S
RAT TCPA SSDT
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 32 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 34 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
cpu2 at mainbus0: apid 50 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
cpu3 at mainbus0: apid 52 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
cpu4 at mainbus0: apid 33 (application processor)
cpu4: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu4:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
cpu5 at mainbus0: apid 35 (application processor)
cpu5: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu5:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
cpu6 at mainbus0: apid 51 (application processor)
cpu6: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu6:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
cpu7 at mainbus0: apid 53 (application processor)
cpu7: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel" 686-class)
2.40 GHz
cpu7:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX1)
acpiprt2 at acpi0: bus 2 (PEX3)
acpiprt3 at acpi0: bus 3 (PEX4)
acpiprt4 at acpi0: bus 4 (PEX5)
acpiprt5 at acpi0: bus 8 (PEX6)
acpiprt6 at acpi0: bus 12 (PEX7)
acpiprt7 at acpi0: bus 13 (PEX9)
acpiprt8 at acpi0: bus -1 (PEXA)
acpiprt9 at acpi0: bus -1 (SBEX)
acpiprt10 at acpi0: bus 14 (COMP)
acpicpu0 at acpi0: C3, C1
acpicpu1 at acpi0: C3, C1
acpicpu2 at acpi0: C3, C1
acpicpu3 at acpi0: C3, C1
acpicpu4 at acpi0: C3, C1
acpicpu5 at acpi0: C3, C1
acpicpu6 at acpi0: C3, C1
acpicpu7 at acpi0: C3, C1
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x2e00
0xcc000/0x6400 0xd
2800/0x1000! 0xec000/0x4000!
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x13
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
pci1 at ppb0 bus 1
bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 4
bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 16
ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
pci2 at ppb1 bus 2
bnx2 at pci2 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 0
bnx3 at pci2 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 10
ppb2 at pci0 dev 4 function 0 "Intel X58 PCIE" rev 0x13
pci3 at ppb2 bus 3
mfi0 at pci3 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04: apic 1
int 1, De
ll PERC 6/i integrated
mfi0: logical drives 1, version 6.3.0-0001, 256MB RAM
scsibus0 at mfi0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 6/i, 1.22> SCSI3 0/direct
fixed naa.67
82bcb0267de8001592800a39afa593
sd0: 7628800MB, 512 bytes/sector, 15623782400 sectors
ppb3 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
pci5 at ppb4 bus 5
ppb5 at pci5 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
pci6 at ppb5 bus 6
em0 at pci6 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
00:1b:21:ad:39:d0
em1 at pci6 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
00:1b:21:ad:39:d1
ppb6 at pci5 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
pci7 at ppb6 bus 7
em2 at pci7 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
00:1b:21:ad:39:d4
em3 at pci7 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
00:1b:21:ad:39:d5
ppb7 at pci0 dev 6 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21
pci8 at ppb7 bus 8
ppb8 at pci8 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
pci9 at ppb8 bus 9
ppb9 at pci9 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
pci10 at ppb9 bus 10
em4 at pci10 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
  00:1b:21:ad:2d:c0
em5 at pci10 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
  00:1b:21:ad:2d:c1
ppb10 at pci9 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
pci11 at ppb10 bus 11
em6 at pci11 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
  00:1b:21:ad:2d:c4
em7 at pci11 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
  00:1b:21:ad:2d:c5
ppb11 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21
pci12 at ppb11 bus 12
ppb12 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21
pci13 at ppb12 bus 13
"Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 17
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 21
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 20
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 21
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci14 at ppb13 bus 14
vga1 at pci14 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 c
onfigured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 23 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L633J, D150> ATAPI
5/cdrom r
emovable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub6 at uhub0 port 3 "Standard Microsystems product 0x2514" rev
2.00/0.00 addr
2
uhub7 at uhub6 port 1 "Dell Dell USB Keyboard Hub" rev 1.10/2.00 addr 3
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Dell Dell USB
Keyboard Hub"
  rev 1.10/2.00 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 1 configuration 1 interface 1 "Dell Dell USB
Keyboard Hub"
  rev 1.10/2.00 addr 4
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=1, feature=1
umass0 at uhub6 port 2 configuration 1 interface 0 "USB 2.0 USB Flash
Drive" rev
  2.00/11.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <USB 2.0, USB Flash Drive, 1100> SCSI0
0/direct re
movable serial.125f0000000000000449
sd1: 7728MB, 512 bytes/sector, 15826944 sectors
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd1a (c71dd7d60e25b2a6.a) swap on sd1b dump on sd1b
bnx0: address 78:2b:cb:27:b3:c4
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 78:2b:cb:27:b3:c6
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx2: address 78:2b:cb:27:b3:c8
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx3: address 78:2b:cb:27:b3:ca
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8

OpenBSD 5.0-current (GENERIC.MP) #159: Tue Dec 20 11:02:37 MST 2011
     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 6428266496 (6130MB)
avail mem = 6243004416 (5953MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xcf49c000 (84 entries)
bios0: vendor Dell Inc. version "3.0.0" date 01/31/2011
bios0: Dell Inc. PowerEdge R710
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST
BERT EINJ S
RAT TCPA SSDT
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 32 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.32 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 34 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu1: 256KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 50 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu2: 256KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 52 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu3: 256KB 64b/line 8-way L2 cache
cpu4 at mainbus0: apid 33 (application processor)
cpu4: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu4: 256KB 64b/line 8-way L2 cache
cpu5 at mainbus0: apid 35 (application processor)
cpu5: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu5: 256KB 64b/line 8-way L2 cache
cpu6 at mainbus0: apid 51 (application processor)
cpu6: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu6: 256KB 64b/line 8-way L2 cache
cpu7 at mainbus0: apid 53 (application processor)
cpu7: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
cpu7: 256KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX1)
acpiprt2 at acpi0: bus 2 (PEX3)
acpiprt3 at acpi0: bus 3 (PEX4)
acpiprt4 at acpi0: bus 4 (PEX5)
acpiprt5 at acpi0: bus 8 (PEX6)
acpiprt6 at acpi0: bus 12 (PEX7)
acpiprt7 at acpi0: bus 13 (PEX9)
acpiprt8 at acpi0: bus -1 (PEXA)
acpiprt9 at acpi0: bus -1 (SBEX)
acpiprt10 at acpi0: bus 14 (COMP)
acpicpu0 at acpi0: C3, C1
acpicpu1 at acpi0: C3, C1
acpicpu2 at acpi0: C3, C1
acpicpu3 at acpi0: C3, C1
acpicpu4 at acpi0: C3, C1
acpicpu5 at acpi0: C3, C1
acpicpu6 at acpi0: C3, C1
acpicpu7 at acpi0: C3, C1
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x13
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
pci1 at ppb0 bus 1
bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 4
bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 16
ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
pci2 at ppb1 bus 2
bnx2 at pci2 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 0
bnx3 at pci2 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 10
ppb2 at pci0 dev 4 function 0 "Intel X58 PCIE" rev 0x13
pci3 at ppb2 bus 3
mfi0 at pci3 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04: apic 1
int 1, De
ll PERC 6/i integrated
mfi0: logical drives 1, version 6.3.0-0001, 256MB RAM
scsibus0 at mfi0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 6/i, 1.22> SCSI3 0/direct
fixed naa.67
82bcb0267de8001592800a39afa593
sd0: 7628800MB, 512 bytes/sector, 15623782400 sectors
ppb3 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13: msi
pci4 at ppb3 bus 4
ppb4 at pci4 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
pci5 at ppb4 bus 5
ppb5 at pci5 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
pci6 at ppb5 bus 6
em0 at pci6 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
00:1b:21:ad:39:d0
em1 at pci6 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
00:1b:21:ad:39:d1
ppb6 at pci5 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
pci7 at ppb6 bus 7
em2 at pci7 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
00:1b:21:ad:39:d4
em3 at pci7 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
00:1b:21:ad:39:d5
ppb7 at pci0 dev 6 function 0 "Intel X58 PCIE" rev 0x13: msi
pci8 at ppb7 bus 8
ppb8 at pci8 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
pci9 at ppb8 bus 9
ppb9 at pci9 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
pci10 at ppb9 bus 10
em4 at pci10 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
  00:1b:21:ad:2d:c0
em5 at pci10 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
  00:1b:21:ad:2d:c1
ppb10 at pci9 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
pci11 at ppb10 bus 11
em6 at pci11 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
  00:1b:21:ad:2d:c4
em7 at pci11 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01: msi,
address
  00:1b:21:ad:2d:c5
ppb11 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: msi
pci12 at ppb11 bus 12
ppb12 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13: msi
pci13 at ppb12 bus 13
"Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 17
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 21
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 20
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 21
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci14 at ppb13 bus 14
vga1 at pci14 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
channel 0 c
onfigured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 23 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L633J, D150> ATAPI
5/cdrom r
emovable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhub6 at uhub0 port 3 "Standard Microsystems product 0x2514" rev
2.00/0.00 addr
2
uhub7 at uhub6 port 1 "Dell Dell USB Keyboard Hub" rev 1.10/2.00 addr 3
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Dell Dell USB
Keyboard Hub"
  rev 1.10/2.00 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 1 configuration 1 interface 1 "Dell Dell USB
Keyboard Hub"
  rev 1.10/2.00 addr 4
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=1, feature=1
umass0 at uhub6 port 2 configuration 1 interface 0 "USB 2.0 USB Flash
Drive" rev
  2.00/11.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <USB 2.0, USB Flash Drive, 1100> SCSI0
0/direct re
movable serial.125f0000000000000449
sd1: 7728MB, 512 bytes/sector, 15826944 sectors
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (b36166f898b5a6c1.a) swap on sd0b dump on sd0b
bnx0: address 78:2b:cb:27:b3:c4
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address 78:2b:cb:27:b3:c6
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx2: address 78:2b:cb:27:b3:c8
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx3: address 78:2b:cb:27:b3:ca
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8







On 12/21/2011 11:00 AM, Oliver Seufer wrote:

> A complete verbose boot log with "trace" and "show registers" can be downloaded here:
> http://www.seufer.de/crash_report.gz
>
> If I can do anything else please let me know.
>
>> Synopsis:      kernel panic during boot on Dell Power Edge R710
>> Category:      system i386
>> Environment:
>          System      : OpenBSD 5.0
>          Details     : OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
>                           [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
>
>          Architecture: OpenBSD.i386
>          Machine     : i386
>> Description:
>          During the boot squence the system just stop booting with a panic. The
>          system boots fine with OpenBSD 4.9.
>> How-To-Repeat:
>          Boot OpenBSD 5.0 on Dell Power Edge R710
>> Fix:
> Non known
>
> Here are the last messages:
>>>> probing for pcic2
>>>> probing for pcic2 failed
> panic: ioapic1: can't alloc vector for pin 0 at level 60
> Stopped at      Debugger+0x4:   popl    %ebp
> Debugger(d3f12fc0,d0a1950c,d0be3ed8,d0be3ed4,d3f2ac00) at Debugger+0x4
> panic(d07f6905,d3f13c14,0,60,d0a9ecd0) at panic+0x7a
> apic_vectorset(d3f13c00,0,60,60,0) at apic_vectorset+0x7b
> ioapic_enable(d0a737e4,0,d0be3f98,d035c468,d0b2e1b4) at ioapic_enable+0xb0
> cpu_configure(d0b2e1b4,1,3,0,0) at cpu_configure+0x3c
> main(d02004ba,d02004c2,0,0,0) at main+0x3ac
> RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
> DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
> ddb>  trace
> Debugger(d3f12fc0,d0a1950c,d0be3ed8,d0be3ed4,d3f2ac00) at Debugger+0x4
> panic(d07f6905,d3f13c14,0,60,d0a9ecd0) at panic+0x7a
> apic_vectorset(d3f13c00,0,60,60,0) at apic_vectorset+0x7b
> ioapic_enable(d0a737e4,0,d0be3f98,d035c468,d0b2e1b4) at ioapic_enable+0xb0
> cpu_configure(d0b2e1b4,1,3,0,0) at cpu_configure+0x3c
> main(d02004ba,d02004c2,0,0,0) at main+0x3ac
> ddb>  ps
>     PID   PPID   PGRP    UID  S       FLAGS  WAIT          COMMAND
> *    0     -1      0      0  7       0x200                swapper
> ddb>  show registers
> ds                  0x10
> es                  0x10
> fs                  0x20
> gs                     0
> edi                 0x60
> esi                0x100
> ebp           0xd0be3ea8        end+0xb311c
> ebx           0xd07f6905        mpbios_icu_table+0x16d
> edx                    0
> ecx           0xd0a0d67c        kprintf_mutex
> eax                  0x1
> eip           0xd049d8fc        Debugger+0x4
> cs                   0x8
> eflags             0x202
> esp           0xd0be3ea8        end+0xb311c
> ss                  0x10
> Debugger+0x4:   popl    %ebp

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD 5.0 panic on boot Dell R710

Oliver Seufer-2
As I mentioned the hardware runs fine with OpenBSD 4.9. I also tried the
latest snapshot (ftp://ftp.openbsd.org/pub/OpenBSD/snapshots/i386/cd50.iso)
Same problem. The hardware also runs without any problems with Debian Squeeze.

I haven't done any firmwareupdates and checked the BIOS settings. This is a
complete new system.

Compared to your BIOS version the system has a never BIOS:
bios0: vendor Dell Inc. version "6.0.7" date 08/18/2011

Which MPT2Bios version do you have?
MPT2Bios: 7.11.01.00 (2010.12.15)

The systeme has 20 network ports (5x4 ports), maybe that makes a difference.

On Thu, 22 Dec 2011, Nick Holland wrote:

> I have just confirmed the Dell Power Edge R710 I have here has no
> issue, with either "just barely before release" and -current on both
> i386 and amd64, and I've loaded older versions of OpenBSD on older
> R710s in the past.
>
> I presume this hardware works with some other OS?
>
> Firmware updates?  Some odd BIOS setting?
>
> Nick.
>
> OpenBSD 5.0 (GENERIC.MP) #44: Mon Aug  8 15:02:49 MDT 2011
>     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
> real mem  = 3476066304 (3315MB)
> avail mem = 3409141760 (3251MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 01/31/11, BIOS32 rev. 0 @
> 0xf9be0, SMBIOS
> rev. 2.6 @ 0xcf49c000 (84 entries)
> bios0: vendor Dell Inc. version "3.0.0" date 01/31/2011
> bios0: Dell Inc. PowerEdge R710
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S4 S5
> acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST
> BERT EINJ S
> RAT TCPA SSDT
> acpi0: wakeup devices PCI0(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 32 (boot processor)
> cpu0: apic clock running at 133MHz
> cpu1 at mainbus0: apid 34 (application processor)
> cpu1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
> cpu2 at mainbus0: apid 50 (application processor)
> cpu2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
> cpu3 at mainbus0: apid 52 (application processor)
> cpu3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
> cpu4 at mainbus0: apid 33 (application processor)
> cpu4: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu4: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
> cpu5 at mainbus0: apid 35 (application processor)
> cpu5: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu5: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
> cpu6 at mainbus0: apid 51 (application processor)
> cpu6: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu6: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
> cpu7 at mainbus0: apid 53 (application processor)
> cpu7: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz ("GenuineIntel"
> 686-class) 2.40 GHz
> cpu7: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins
> ioapic1: misconfigured as apic 0, remapped to apid 1
> acpihpet0 at acpi0: 14318179 Hz
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (PEX1)
> acpiprt2 at acpi0: bus 2 (PEX3)
> acpiprt3 at acpi0: bus 3 (PEX4)
> acpiprt4 at acpi0: bus 4 (PEX5)
> acpiprt5 at acpi0: bus 8 (PEX6)
> acpiprt6 at acpi0: bus 12 (PEX7)
> acpiprt7 at acpi0: bus 13 (PEX9)
> acpiprt8 at acpi0: bus -1 (PEXA)
> acpiprt9 at acpi0: bus -1 (SBEX)
> acpiprt10 at acpi0: bus 14 (COMP)
> acpicpu0 at acpi0: C3, C1
> acpicpu1 at acpi0: C3, C1
> acpicpu2 at acpi0: C3, C1
> acpicpu3 at acpi0: C3, C1
> acpicpu4 at acpi0: C3, C1
> acpicpu5 at acpi0: C3, C1
> acpicpu6 at acpi0: C3, C1
> acpicpu7 at acpi0: C3, C1
> bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1000 0xc9000/0x2e00
> 0xcc000/0x6400 0xd
> 2800/0x1000! 0xec000/0x4000!
> ipmi at mainbus0 not configured
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x13
> ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
> pci1 at ppb0 bus 1
> bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 4
> bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 16
> ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
> pci2 at ppb1 bus 2
> bnx2 at pci2 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 0
> bnx3 at pci2 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 10
> ppb2 at pci0 dev 4 function 0 "Intel X58 PCIE" rev 0x13
> pci3 at ppb2 bus 3
> mfi0 at pci3 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04: apic
> 1 int 1, De
> ll PERC 6/i integrated
> mfi0: logical drives 1, version 6.3.0-0001, 256MB RAM
> scsibus0 at mfi0: 1 targets
> sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 6/i, 1.22> SCSI3 0/direct
> fixed naa.67
> 82bcb0267de8001592800a39afa593
> sd0: 7628800MB, 512 bytes/sector, 15623782400 sectors
> ppb3 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci5 at ppb4 bus 5
> ppb5 at pci5 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci6 at ppb5 bus 6
> em0 at pci6 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
> 00:1b:21:ad:39:d0
> em1 at pci6 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
> 00:1b:21:ad:39:d1
> ppb6 at pci5 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci7 at ppb6 bus 7
> em2 at pci7 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
> 00:1b:21:ad:39:d4
> em3 at pci7 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
> 00:1b:21:ad:39:d5
> ppb7 at pci0 dev 6 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21
> pci8 at ppb7 bus 8
> ppb8 at pci8 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci9 at ppb8 bus 9
> ppb9 at pci9 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci10 at ppb9 bus 10
> em4 at pci10 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
>  00:1b:21:ad:2d:c0
> em5 at pci10 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
>  00:1b:21:ad:2d:c1
> ppb10 at pci9 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci11 at ppb10 bus 11
> em6 at pci11 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
>  00:1b:21:ad:2d:c4
> em7 at pci11 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
>  00:1b:21:ad:2d:c5
> ppb11 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21
> pci12 at ppb11 bus 12
> ppb12 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13: apic 1 int 21
> pci13 at ppb12 bus 13
> "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
> "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
> "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 17
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 18
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 19
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 21
> uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 20
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 21
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> pci14 at ppb13 bus 14
> vga1 at pci14 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02: PM disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
> channel 0 c
> onfigured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 0 int 23 for native-PCI interrupt
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L633J, D150>
> ATAPI 5/cdrom r
> emovable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> uhub6 at uhub0 port 3 "Standard Microsystems product 0x2514" rev
> 2.00/0.00 addr
> 2
> uhub7 at uhub6 port 1 "Dell Dell USB Keyboard Hub" rev 1.10/2.00 addr 3
> uhidev0 at uhub7 port 1 configuration 1 interface 0 "Dell Dell USB
> Keyboard Hub"
>  rev 1.10/2.00 addr 4
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub7 port 1 configuration 1 interface 1 "Dell Dell USB
> Keyboard Hub"
>  rev 1.10/2.00 addr 4
> uhidev1: iclass 3/0, 3 report ids
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
> uhid2 at uhidev1 reportid 3: input=3, output=1, feature=1
> umass0 at uhub6 port 2 configuration 1 interface 0 "USB 2.0 USB
> Flash Drive" rev
>  2.00/11.00 addr 5
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <USB 2.0, USB Flash Drive, 1100> SCSI0
> 0/direct re
> movable serial.125f0000000000000449
> sd1: 7728MB, 512 bytes/sector, 15826944 sectors
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd1a (c71dd7d60e25b2a6.a) swap on sd1b dump on sd1b
> bnx0: address 78:2b:cb:27:b3:c4
> brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> bnx1: address 78:2b:cb:27:b3:c6
> brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> bnx2: address 78:2b:cb:27:b3:c8
> brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> bnx3: address 78:2b:cb:27:b3:ca
> brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
>
> OpenBSD 5.0-current (GENERIC.MP) #159: Tue Dec 20 11:02:37 MST 2011
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 6428266496 (6130MB)
> avail mem = 6243004416 (5953MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xcf49c000 (84 entries)
> bios0: vendor Dell Inc. version "3.0.0" date 01/31/2011
> bios0: Dell Inc. PowerEdge R710
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S4 S5
> acpi0: tables DSDT FACP APIC SPCR HPET DM__ MCFG WD__ SLIC ERST HEST
> BERT EINJ S
> RAT TCPA SSDT
> acpi0: wakeup devices PCI0(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 32 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.32 MHz
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: apic clock running at 133MHz
> cpu1 at mainbus0: apid 34 (application processor)
> cpu1: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu2 at mainbus0: apid 50 (application processor)
> cpu2: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu3 at mainbus0: apid 52 (application processor)
> cpu3: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu4 at mainbus0: apid 33 (application processor)
> cpu4: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
> cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
> cpu4: 256KB 64b/line 8-way L2 cache
> cpu5 at mainbus0: apid 35 (application processor)
> cpu5: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
> cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
> cpu5: 256KB 64b/line 8-way L2 cache
> cpu6 at mainbus0: apid 51 (application processor)
> cpu6: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
> cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
> cpu6: 256KB 64b/line 8-way L2 cache
> cpu7 at mainbus0: apid 53 (application processor)
> cpu7: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz, 2394.00 MHz
> cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CF
> LUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
> T,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG
> cpu7: 256KB 64b/line 8-way L2 cache
> ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins
> ioapic1: misconfigured as apic 0, remapped to apid 1
> acpihpet0 at acpi0: 14318179 Hz
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (PEX1)
> acpiprt2 at acpi0: bus 2 (PEX3)
> acpiprt3 at acpi0: bus 3 (PEX4)
> acpiprt4 at acpi0: bus 4 (PEX5)
> acpiprt5 at acpi0: bus 8 (PEX6)
> acpiprt6 at acpi0: bus 12 (PEX7)
> acpiprt7 at acpi0: bus 13 (PEX9)
> acpiprt8 at acpi0: bus -1 (PEXA)
> acpiprt9 at acpi0: bus -1 (SBEX)
> acpiprt10 at acpi0: bus 14 (COMP)
> acpicpu0 at acpi0: C3, C1
> acpicpu1 at acpi0: C3, C1
> acpicpu2 at acpi0: C3, C1
> acpicpu3 at acpi0: C3, C1
> acpicpu4 at acpi0: C3, C1
> acpicpu5 at acpi0: C3, C1
> acpicpu6 at acpi0: C3, C1
> acpicpu7 at acpi0: C3, C1
> ipmi at mainbus0 not configured
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x13
> ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
> pci1 at ppb0 bus 1
> bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 4
> bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 16
> ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
> pci2 at ppb1 bus 2
> bnx2 at pci2 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 0
> bnx3 at pci2 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 10
> ppb2 at pci0 dev 4 function 0 "Intel X58 PCIE" rev 0x13
> pci3 at ppb2 bus 3
> mfi0 at pci3 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04: apic
> 1 int 1, De
> ll PERC 6/i integrated
> mfi0: logical drives 1, version 6.3.0-0001, 256MB RAM
> scsibus0 at mfi0: 1 targets
> sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 6/i, 1.22> SCSI3 0/direct
> fixed naa.67
> 82bcb0267de8001592800a39afa593
> sd0: 7628800MB, 512 bytes/sector, 15623782400 sectors
> ppb3 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13: msi
> pci4 at ppb3 bus 4
> ppb4 at pci4 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci5 at ppb4 bus 5
> ppb5 at pci5 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci6 at ppb5 bus 6
> em0 at pci6 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
> 00:1b:21:ad:39:d0
> em1 at pci6 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
> 00:1b:21:ad:39:d1
> ppb6 at pci5 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci7 at ppb6 bus 7
> em2 at pci7 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
> 00:1b:21:ad:39:d4
> em3 at pci7 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
> 00:1b:21:ad:39:d5
> ppb7 at pci0 dev 6 function 0 "Intel X58 PCIE" rev 0x13: msi
> pci8 at ppb7 bus 8
> ppb8 at pci8 dev 0 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci9 at ppb8 bus 9
> ppb9 at pci9 dev 2 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci10 at ppb9 bus 10
> em4 at pci10 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
>  00:1b:21:ad:2d:c0
> em5 at pci10 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
>  00:1b:21:ad:2d:c1
> ppb10 at pci9 dev 4 function 0 "IDT 89HPES12N3A" rev 0x0e
> pci11 at ppb10 bus 11
> em6 at pci11 dev 0 function 0 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
>  00:1b:21:ad:2d:c4
> em7 at pci11 dev 0 function 1 "Intel PRO/1000 QP (82576)" rev 0x01:
> msi, address
>  00:1b:21:ad:2d:c5
> ppb11 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: msi
> pci12 at ppb11 bus 12
> ppb12 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13: msi
> pci13 at ppb12 bus 13
> "Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
> "Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
> "Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 17
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 18
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 19
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 21
> uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 20
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 21
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> pci14 at ppb13 bus 14
> vga1 at pci14 dev 3 function 0 "Matrox MGA G200eW" rev 0x0a
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02
> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA,
> channel 0 c
> onfigured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 0 int 23 for native-PCI interrupt
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L633J, D150>
> ATAPI 5/cdrom r
> emovable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> mtrr: Pentium Pro MTRR support
> uhub6 at uhub0 port 3 "Standard Microsystems product 0x2514" rev
> 2.00/0.00 addr
> 2
> uhub7 at uhub6 port 1 "Dell Dell USB Keyboard Hub" rev 1.10/2.00 addr 3
> uhidev0 at uhub7 port 1 configuration 1 interface 0 "Dell Dell USB
> Keyboard Hub"
>  rev 1.10/2.00 addr 4
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub7 port 1 configuration 1 interface 1 "Dell Dell USB
> Keyboard Hub"
>  rev 1.10/2.00 addr 4
> uhidev1: iclass 3/0, 3 report ids
> uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
> uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0
> uhid2 at uhidev1 reportid 3: input=3, output=1, feature=1
> umass0 at uhub6 port 2 configuration 1 interface 0 "USB 2.0 USB
> Flash Drive" rev
>  2.00/11.00 addr 5
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <USB 2.0, USB Flash Drive, 1100> SCSI0
> 0/direct re
> movable serial.125f0000000000000449
> sd1: 7728MB, 512 bytes/sector, 15826944 sectors
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd0a (b36166f898b5a6c1.a) swap on sd0b dump on sd0b
> bnx0: address 78:2b:cb:27:b3:c4
> brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> bnx1: address 78:2b:cb:27:b3:c6
> brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> bnx2: address 78:2b:cb:27:b3:c8
> brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
> bnx3: address 78:2b:cb:27:b3:ca
> brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
>
>
>
>
>
>
>
> On 12/21/2011 11:00 AM, Oliver Seufer wrote:
> >A complete verbose boot log with "trace" and "show registers" can be downloaded here:
> >http://www.seufer.de/crash_report.gz
> >
> >If I can do anything else please let me know.
> >
> >>Synopsis:      kernel panic during boot on Dell Power Edge R710
> >>Category:      system i386
> >>Environment:
> >         System      : OpenBSD 5.0
> >         Details     : OpenBSD 5.0 (GENERIC) #43: Wed Aug 17 10:10:52 MDT 2011
> >                          [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
> >
> >         Architecture: OpenBSD.i386
> >         Machine     : i386
> >>Description:
> >         During the boot squence the system just stop booting with a panic. The
> >         system boots fine with OpenBSD 4.9.
> >>How-To-Repeat:
> >         Boot OpenBSD 5.0 on Dell Power Edge R710
> >>Fix:
> > Non known
> >
> >Here are the last messages:
> >>>>probing for pcic2
> >>>>probing for pcic2 failed
> >panic: ioapic1: can't alloc vector for pin 0 at level 60
> >Stopped at      Debugger+0x4:   popl    %ebp
> >Debugger(d3f12fc0,d0a1950c,d0be3ed8,d0be3ed4,d3f2ac00) at Debugger+0x4
> >panic(d07f6905,d3f13c14,0,60,d0a9ecd0) at panic+0x7a
> >apic_vectorset(d3f13c00,0,60,60,0) at apic_vectorset+0x7b
> >ioapic_enable(d0a737e4,0,d0be3f98,d035c468,d0b2e1b4) at ioapic_enable+0xb0
> >cpu_configure(d0b2e1b4,1,3,0,0) at cpu_configure+0x3c
> >main(d02004ba,d02004c2,0,0,0) at main+0x3ac
> >RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
> >DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
> >ddb>  trace
> >Debugger(d3f12fc0,d0a1950c,d0be3ed8,d0be3ed4,d3f2ac00) at Debugger+0x4
> >panic(d07f6905,d3f13c14,0,60,d0a9ecd0) at panic+0x7a
> >apic_vectorset(d3f13c00,0,60,60,0) at apic_vectorset+0x7b
> >ioapic_enable(d0a737e4,0,d0be3f98,d035c468,d0b2e1b4) at ioapic_enable+0xb0
> >cpu_configure(d0b2e1b4,1,3,0,0) at cpu_configure+0x3c
> >main(d02004ba,d02004c2,0,0,0) at main+0x3ac
> >ddb>  ps
> >    PID   PPID   PGRP    UID  S       FLAGS  WAIT          COMMAND
> >*    0     -1      0      0  7       0x200                swapper
> >ddb>  show registers
> >ds                  0x10
> >es                  0x10
> >fs                  0x20
> >gs                     0
> >edi                 0x60
> >esi                0x100
> >ebp           0xd0be3ea8        end+0xb311c
> >ebx           0xd07f6905        mpbios_icu_table+0x16d
> >edx                    0
> >ecx           0xd0a0d67c        kprintf_mutex
> >eax                  0x1
> >eip           0xd049d8fc        Debugger+0x4
> >cs                   0x8
> >eflags             0x202
> >esp           0xd0be3ea8        end+0xb311c
> >ss                  0x10
> >Debugger+0x4:   popl    %ebp

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD 5.0 panic on boot Dell R710

Mark Kettenis
> Date: Fri, 23 Dec 2011 08:33:52 +0100
> From: Oliver Seufer <[hidden email]>
>
> The systeme has 20 network ports (5x4 ports), maybe that makes a difference.

That is almost certainly the problem.  You might have more luck
running amd64 on that box.

Reply | Threaded
Open this post in threaded view
|

Re: OpenBSD 5.0 panic on boot Dell R710

Oliver Seufer-2
On Fri, 23 Dec 2011, Mark Kettenis wrote:
> > The systeme has 20 network ports (5x4 ports), maybe that makes a difference.
>
> That is almost certainly the problem.  You might have more luck
> running amd64 on that box.
amd64 works