Not enough inodes on /usr for ports/xenocara

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

Not enough inodes on /usr for ports/xenocara

Marc Peters-3
Hi,

i just did an installation of a HP DL360 Gen9 to test UEFI installations
with 5.9. I just accepted most of the defaults and did this for the
disklabels, too. I wanted to checkout the sources to do release builds,
but the autolayout didn't create enough inodes to do so:

[snip]
U xenocara/xserver/composite/Makefile.am
U xenocara/xserver/composite/Makefile.in
U xenocara/xserver/composite/compalloc.c
U xenocara/xserver/composite/compext.c
U xenocara/xserver/composite/compinit.c
U xenocara/xserver/composite/compint.h
U xenocara/xserver/composite/compositeext.h
U xenocara/xserver/composite/compoverlay.c
U xenocara/xserver/composite/compwindow.c

/usr: create/symlink failed, no inodes free
cvs [checkout aborted]: cannot open
xenocara/xserver/config/CVS/Repository: No space left on device

The layout is:

/usr # df -ikl
Filesystem  1K-blocks      Used     Avail Capacity iused   ifree  %iused
 Mounted on
/dev/sd0a     1028878     53078    924358     5%    1767  154135     1%   /
/dev/sd0l   202395708         4 192275920     0%       1 12794877     0%
  /home
/dev/sd0d     4125390        10   3919112     0%       6  545656     0%
  /tmp
/dev/sd0f     2061054   1578084    379918    81%  285822       0   100%
  /usr
/dev/sd0g     1028878    214660    762776    22%    9218  146684     6%
  /usr/X11R6
/dev/sd0h    10318462     26502   9776038     0%    1820 1323362     0%
  /usr/local
/dev/sd0k     2061054         2   1958000     0%       1  285821     0%
  /usr/obj
/dev/sd0j     2061054    805962   1152040    41%  110019  175803    38%
  /usr/src
/dev/sd0e    36618012      5154  34781958     0%     186 4676932     0%
  /var

The disk is a 300G SAS:
/usr # dmesg | grep sd0
sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 1.18> SCSI3 0/direct
fixed
sd0: 286070MB, 512 bytes/sector, 585871964 sectors
root on sd0a (bd36a419525ca0cb.a) swap on sd0b dump on sd0b

Maybe the caclculation of the autolayout can be adjusted to provide
enough inodes to checkout the sources and build the system.


Marc

dmesg:
OpenBSD 5.9 (GENERIC.MP) #1888: Fri Feb 26 01:20:19 MST 2016
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34208731136 (32623MB)
avail mem = 33167773696 (31631MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x788cc000 (216 entries)
bios0: vendor HP version "P89" date 08/26/2014
bios0: HP ProLiant DL360 Gen9
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP UEFI MCEJ SSDT HEST BERT ERST EINJ HPET PMCT
WDDT APIC MCFG SLIT SRAT SPMI RASF SPCR MSCT BDAT PCCT DMAR SSDT SSDT
SSDT BGRT
acpi0: wakeup devices PEX4(S4) BR05(S4) BR03(S4) BR07(S4) BR11(S4)
BR13(S4) BR15(S4) BR17(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.53 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: failed to identify
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: failed to identify
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: failed to identify
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 8 (application processor)
cpu4: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: failed to identify
cpu4: smt 0, core 4, package 0
cpu5 at mainbus0: apid 10 (application processor)
cpu5: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: failed to identify
cpu5: smt 0, core 5, package 0
cpu6 at mainbus0: apid 16 (application processor)
cpu6: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: failed to identify
cpu6: smt 0, core 0, package 1
cpu7 at mainbus0: apid 18 (application processor)
cpu7: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: failed to identify
cpu7: smt 0, core 1, package 1
cpu8 at mainbus0: apid 20 (application processor)
cpu8: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu8:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu8: 256KB 64b/line 8-way L2 cache
cpu8: failed to identify
cpu8: smt 0, core 2, package 1
cpu9 at mainbus0: apid 22 (application processor)
cpu9: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu9:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu9: 256KB 64b/line 8-way L2 cache
cpu9: failed to identify
cpu9: smt 0, core 3, package 1
cpu10 at mainbus0: apid 24 (application processor)
cpu10: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu10:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu10: 256KB 64b/line 8-way L2 cache
cpu10: failed to identify
cpu10: smt 0, core 4, package 1
cpu11 at mainbus0: apid 26 (application processor)
cpu11: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu11:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu11: 256KB 64b/line 8-way L2 cache
cpu11: failed to identify
cpu11: smt 0, core 5, package 1
cpu12 at mainbus0: apid 1 (application processor)
cpu12: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu12:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu12: 256KB 64b/line 8-way L2 cache
cpu12: failed to identify
cpu12: smt 1, core 0, package 0
cpu13 at mainbus0: apid 3 (application processor)
cpu13: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu13:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu13: 256KB 64b/line 8-way L2 cache
cpu13: failed to identify
cpu13: smt 1, core 1, package 0
cpu14 at mainbus0: apid 5 (application processor)
cpu14: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu14:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu14: 256KB 64b/line 8-way L2 cache
cpu14: failed to identify
cpu14: smt 1, core 2, package 0
cpu15 at mainbus0: apid 7 (application processor)
cpu15: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu15:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu15: 256KB 64b/line 8-way L2 cache
cpu15: failed to identify
cpu15: smt 1, core 3, package 0
cpu16 at mainbus0: apid 9 (application processor)
cpu16: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu16:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu16: 256KB 64b/line 8-way L2 cache
cpu16: failed to identify
cpu16: smt 1, core 4, package 0
cpu17 at mainbus0: apid 11 (application processor)
cpu17: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu17:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu17: 256KB 64b/line 8-way L2 cache
cpu17: failed to identify
cpu17: smt 1, core 5, package 0
cpu18 at mainbus0: apid 17 (application processor)
cpu18: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu18:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu18: 256KB 64b/line 8-way L2 cache
cpu18: failed to identify
cpu18: smt 1, core 0, package 1
cpu19 at mainbus0: apid 19 (application processor)
cpu19: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu19:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu19: 256KB 64b/line 8-way L2 cache
cpu19: failed to identify
cpu19: smt 1, core 1, package 1
cpu20 at mainbus0: apid 21 (application processor)
cpu20: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu20:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu20: 256KB 64b/line 8-way L2 cache
cpu20: failed to identify
cpu20: smt 1, core 2, package 1
cpu21 at mainbus0: apid 23 (application processor)
cpu21: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu21:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu21: 256KB 64b/line 8-way L2 cache
cpu21: failed to identify
cpu21: smt 1, core 3, package 1
cpu22 at mainbus0: apid 25 (application processor)
cpu22: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu22:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu22: 256KB 64b/line 8-way L2 cache
cpu22: failed to identify
cpu22: smt 1, core 4, package 1
cpu23 at mainbus0: apid 27 (application processor)
cpu23: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
cpu23:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
cpu23: 256KB 64b/line 8-way L2 cache
cpu23: failed to identify
cpu23: smt 1, core 5, package 1
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec01000, version 20, 24 pins
ioapic2 at mainbus0: apid 10 pa 0xfec40000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0x80000000, bus 0-255
acpiprt0 at acpi0: bus 127 (UNC0)
acpiprt1 at acpi0: bus 255 (UNC1)
acpiprt2 at acpi0: bus 0 (PCI0)
acpiprt3 at acpi0: bus 1 (PEX2)
acpiprt4 at acpi0: bus 2 (PEX4)
acpiprt5 at acpi0: bus 3 (BR01)
acpiprt6 at acpi0: bus 4 (BR05)
acpiprt7 at acpi0: bus 5 (BR03)
acpiprt8 at acpi0: bus 8 (BR07)
acpiprt9 at acpi0: bus 128 (PCI1)
acpicpu0 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu1 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu2 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu3 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu4 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu5 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu6 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu7 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu8 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu9 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu10 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu11 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu12 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu13 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu14 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu15 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu16 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu17 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu18 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu19 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu20 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu21 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu22 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
acpicpu23 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel E5 v3 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel E5 v3 PCIE" rev 0x02
pci1 at ppb0 bus 3
ciss0 at pci1 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01:
apic 8 int 16
ciss0: 1 LD, HW rev 1, FW 1.18/1.18, 64bit fifo rro
scsibus1 at ciss0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 1.18> SCSI3 0/direct
fixed
sd0: 286070MB, 512 bytes/sector, 585871964 sectors
ppb1 at pci0 dev 1 function 1 "Intel E5 v3 PCIE" rev 0x02
pci2 at ppb1 bus 12
ppb2 at pci0 dev 2 function 0 "Intel E5 v3 PCIE" rev 0x02: msi
pci3 at ppb2 bus 5
ppb3 at pci0 dev 2 function 1 "Intel E5 v3 PCIE" rev 0x02
pci4 at ppb3 bus 13
ppb4 at pci0 dev 2 function 2 "Intel E5 v3 PCIE" rev 0x02
pci5 at ppb4 bus 4
ppb5 at pci0 dev 2 function 3 "Intel E5 v3 PCIE" rev 0x02
pci6 at ppb5 bus 14
ppb6 at pci0 dev 3 function 0 "Intel E5 v3 PCIE" rev 0x02: msi
pci7 at ppb6 bus 8
ppb7 at pci0 dev 3 function 1 "Intel E5 v3 PCIE" rev 0x02
pci8 at ppb7 bus 15
ppb8 at pci0 dev 3 function 2 "Intel E5 v3 PCIE" rev 0x02
pci9 at ppb8 bus 11
ppb9 at pci0 dev 3 function 3 "Intel E5 v3 PCIE" rev 0x02
pci10 at ppb9 bus 16
"Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 0 not configured
"Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 1 not configured
"Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 2 not configured
"Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 3 not configured
"Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 4 not configured
"Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 5 not configured
"Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 6 not configured
"Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 7 not configured
"Intel E5 v3 Address Map" rev 0x02 at pci0 dev 5 function 0 not configured
"Intel E5 v3 Hot Plug" rev 0x02 at pci0 dev 5 function 1 not configured
"Intel E5 v3 Error Reporting" rev 0x02 at pci0 dev 5 function 2 not
configured
"Intel E5 v3 I/O APIC" rev 0x02 at pci0 dev 5 function 4 not configured
"Intel C610 MS SPSR" rev 0x05 at pci0 dev 17 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel C610 xHCI" rev 0x05: apic 8 int 19
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
ppb10 at pci0 dev 28 function 0 "Intel C610 PCIE" rev 0xd5
pci11 at ppb10 bus 17
ppb11 at pci0 dev 28 function 2 "Intel C610 PCIE" rev 0xd5: msi
pci12 at ppb11 bus 1
"Hewlett-Packard iLO3 Slave" rev 0x06 at pci12 dev 0 function 0 not
configured
"Matrox MGA G200eH" rev 0x01 at pci12 dev 0 function 1 not configured
"Hewlett-Packard iLO3 Management" rev 0x06 at pci12 dev 0 function 2 not
configured
uhci0 at pci12 dev 0 function 4 "Hewlett-Packard USB" rev 0x03: apic 8
int 19
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1
ppb12 at pci0 dev 28 function 4 "Intel C610 PCIE" rev 0xd5: msi
pci13 at ppb12 bus 2
bge0 at pci13 dev 0 function 0 "Broadcom BCM5719" rev 0x01, unknown
BCM5719 (0x5719001), APE firmware NCSI 1.2.46.0: msi, address
c4:34:6b:b9:48:a0
brgphy0 at bge0 phy 1: BCM5719C 10/100/1000baseT PHY, rev. 0
bge1 at pci13 dev 0 function 1 "Broadcom BCM5719" rev 0x01, unknown
BCM5719 (0x5719001), APE firmware NCSI 1.2.46.0: msi, address
c4:34:6b:b9:48:a1
brgphy1 at bge1 phy 2: BCM5719C 10/100/1000baseT PHY, rev. 0
bge2 at pci13 dev 0 function 2 "Broadcom BCM5719" rev 0x01, unknown
BCM5719 (0x5719001), APE firmware NCSI 1.2.46.0: msi, address
c4:34:6b:b9:48:a2
brgphy2 at bge2 phy 3: BCM5719C 10/100/1000baseT PHY, rev. 0
bge3 at pci13 dev 0 function 3 "Broadcom BCM5719" rev 0x01, unknown
BCM5719 (0x5719001), APE firmware NCSI 1.2.46.0: msi, address
c4:34:6b:b9:48:a3
brgphy3 at bge3 phy 4: BCM5719C 10/100/1000baseT PHY, rev. 0
pcib0 at pci0 dev 31 function 0 "Intel C610 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel C610 AHCI" rev 0x05: msi, AHCI 1.3
ahci0: port 5: 1.5Gb/s
scsibus2 at ahci0: 32 targets
cd0 at scsibus2 targ 5 lun 0: <hp, DVDRAM GU90N, W901> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel C610 SMBus" rev 0x05: apic 8 int 18
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
pci14 at mainbus0 bus 127
127:30:3: mem address conflict 0x10/0x10
"Intel E5 v3 QPI" rev 0x02 at pci14 dev 8 function 0 not configured
"Intel E5 v3 QPI" rev 0x02 at pci14 dev 8 function 3 not configured
"Intel E5 v3 QPI Monitor" rev 0x02 at pci14 dev 11 function 0 not configured
"Intel E5 v3 QPI Monitor" rev 0x02 at pci14 dev 11 function 1 not configured
"Intel E5 v3 QPI Monitor" rev 0x02 at pci14 dev 11 function 2 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci14 dev 12 function 0 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci14 dev 12 function 1 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci14 dev 12 function 2 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci14 dev 12 function 3 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci14 dev 12 function 4 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci14 dev 12 function 5 not configured
"Intel E5 v3 Ring Agent" rev 0x02 at pci14 dev 15 function 0 not configured
"Intel E5 v3 Ring Agent" rev 0x02 at pci14 dev 15 function 1 not configured
"Intel E5 v3 SAD" rev 0x02 at pci14 dev 15 function 4 not configured
"Intel E5 v3 SAD" rev 0x02 at pci14 dev 15 function 5 not configured
"Intel E5 v3 SAD" rev 0x02 at pci14 dev 15 function 6 not configured
"Intel E5 v3 PCIE Ring" rev 0x02 at pci14 dev 16 function 0 not configured
"Intel E5 v3 PCIE Monitor" rev 0x02 at pci14 dev 16 function 1 not
configured
"Intel E5 v3 Scratch" rev 0x02 at pci14 dev 16 function 5 not configured
"Intel E5 v3 Scratch" rev 0x02 at pci14 dev 16 function 6 not configured
"Intel E5 v3 Scratch" rev 0x02 at pci14 dev 16 function 7 not configured
"Intel E5 v3 Home Agent" rev 0x02 at pci14 dev 18 function 0 not configured
"Intel E5 v3 Home Agent" rev 0x02 at pci14 dev 18 function 1 not configured
"Intel E5 v3 Home Agent Debug" rev 0x02 at pci14 dev 18 function 2 not
configured
"Intel E5 v3 Memory" rev 0x02 at pci14 dev 19 function 0 not configured
"Intel E5 v3 RAS" rev 0x02 at pci14 dev 19 function 1 not configured
"Intel E5 v3 TAD" rev 0x02 at pci14 dev 19 function 2 not configured
"Intel E5 v3 TAD" rev 0x02 at pci14 dev 19 function 3 not configured
"Intel E5 v3 TAD" rev 0x02 at pci14 dev 19 function 4 not configured
"Intel E5 v3 TAD" rev 0x02 at pci14 dev 19 function 5 not configured
"Intel E5 v3 DDR Broadcast" rev 0x02 at pci14 dev 19 function 6 not
configured
"Intel E5 v3 DDR Broadcast" rev 0x02 at pci14 dev 19 function 7 not
configured
"Intel E5 v3 Thermal" rev 0x02 at pci14 dev 20 function 0 not configured
"Intel E5 v3 Thermal" rev 0x02 at pci14 dev 20 function 1 not configured
"Intel E5 v3 Error" rev 0x02 at pci14 dev 20 function 2 not configured
"Intel E5 v3 Error" rev 0x02 at pci14 dev 20 function 3 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci14 dev 20 function 6 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci14 dev 20 function 7 not configured
"Intel E5 v3 Thermal" rev 0x02 at pci14 dev 21 function 0 not configured
"Intel E5 v3 Thermal" rev 0x02 at pci14 dev 21 function 1 not configured
"Intel E5 v3 Error" rev 0x02 at pci14 dev 21 function 2 not configured
"Intel E5 v3 Error" rev 0x02 at pci14 dev 21 function 3 not configured
"Intel E5 v3 TA" rev 0x02 at pci14 dev 22 function 0 not configured
"Intel E5 v3 DDR Broadcast" rev 0x02 at pci14 dev 22 function 6 not
configured
"Intel E5 v3 DDR Broadcast" rev 0x02 at pci14 dev 22 function 7 not
configured
"Intel E5 v3 Thermal" rev 0x02 at pci14 dev 23 function 0 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci14 dev 23 function 4 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci14 dev 23 function 5 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci14 dev 23 function 6 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci14 dev 23 function 7 not configured
"Intel E5 v3 PCU" rev 0x02 at pci14 dev 30 function 0 not configured
"Intel E5 v3 PCU" rev 0x02 at pci14 dev 30 function 1 not configured
"Intel E5 v3 PCU" rev 0x02 at pci14 dev 30 function 2 not configured
"Intel E5 v3 PCU" rev 0x02 at pci14 dev 30 function 3 not configured
"Intel E5 v3 PCU" rev 0x02 at pci14 dev 30 function 4 not configured
"Intel E5 v3 VCU" rev 0x02 at pci14 dev 31 function 0 not configured
"Intel E5 v3 VCU" rev 0x02 at pci14 dev 31 function 2 not configured
pci15 at mainbus0 bus 255
255:30:3: mem address conflict 0x10/0x10
"Intel E5 v3 QPI" rev 0x02 at pci15 dev 8 function 0 not configured
"Intel E5 v3 QPI" rev 0x02 at pci15 dev 8 function 3 not configured
"Intel E5 v3 QPI Monitor" rev 0x02 at pci15 dev 11 function 0 not configured
"Intel E5 v3 QPI Monitor" rev 0x02 at pci15 dev 11 function 1 not configured
"Intel E5 v3 QPI Monitor" rev 0x02 at pci15 dev 11 function 2 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci15 dev 12 function 0 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci15 dev 12 function 1 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci15 dev 12 function 2 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci15 dev 12 function 3 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci15 dev 12 function 4 not configured
"Intel E5 v3 Unicast" rev 0x02 at pci15 dev 12 function 5 not configured
"Intel E5 v3 Ring Agent" rev 0x02 at pci15 dev 15 function 0 not configured
"Intel E5 v3 Ring Agent" rev 0x02 at pci15 dev 15 function 1 not configured
"Intel E5 v3 SAD" rev 0x02 at pci15 dev 15 function 4 not configured
"Intel E5 v3 SAD" rev 0x02 at pci15 dev 15 function 5 not configured
"Intel E5 v3 SAD" rev 0x02 at pci15 dev 15 function 6 not configured
"Intel E5 v3 PCIE Ring" rev 0x02 at pci15 dev 16 function 0 not configured
"Intel E5 v3 PCIE Monitor" rev 0x02 at pci15 dev 16 function 1 not
configured
"Intel E5 v3 Scratch" rev 0x02 at pci15 dev 16 function 5 not configured
"Intel E5 v3 Scratch" rev 0x02 at pci15 dev 16 function 6 not configured
"Intel E5 v3 Scratch" rev 0x02 at pci15 dev 16 function 7 not configured
"Intel E5 v3 Home Agent" rev 0x02 at pci15 dev 18 function 0 not configured
"Intel E5 v3 Home Agent" rev 0x02 at pci15 dev 18 function 1 not configured
"Intel E5 v3 Home Agent Debug" rev 0x02 at pci15 dev 18 function 2 not
configured
"Intel E5 v3 Memory" rev 0x02 at pci15 dev 19 function 0 not configured
"Intel E5 v3 RAS" rev 0x02 at pci15 dev 19 function 1 not configured
"Intel E5 v3 TAD" rev 0x02 at pci15 dev 19 function 2 not configured
"Intel E5 v3 TAD" rev 0x02 at pci15 dev 19 function 3 not configured
"Intel E5 v3 TAD" rev 0x02 at pci15 dev 19 function 4 not configured
"Intel E5 v3 TAD" rev 0x02 at pci15 dev 19 function 5 not configured
"Intel E5 v3 DDR Broadcast" rev 0x02 at pci15 dev 19 function 6 not
configured
"Intel E5 v3 DDR Broadcast" rev 0x02 at pci15 dev 19 function 7 not
configured
"Intel E5 v3 Thermal" rev 0x02 at pci15 dev 20 function 0 not configured
"Intel E5 v3 Thermal" rev 0x02 at pci15 dev 20 function 1 not configured
"Intel E5 v3 Error" rev 0x02 at pci15 dev 20 function 2 not configured
"Intel E5 v3 Error" rev 0x02 at pci15 dev 20 function 3 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci15 dev 20 function 6 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci15 dev 20 function 7 not configured
"Intel E5 v3 Thermal" rev 0x02 at pci15 dev 21 function 0 not configured
"Intel E5 v3 Thermal" rev 0x02 at pci15 dev 21 function 1 not configured
"Intel E5 v3 Error" rev 0x02 at pci15 dev 21 function 2 not configured
"Intel E5 v3 Error" rev 0x02 at pci15 dev 21 function 3 not configured
"Intel E5 v3 TA" rev 0x02 at pci15 dev 22 function 0 not configured
"Intel E5 v3 DDR Broadcast" rev 0x02 at pci15 dev 22 function 6 not
configured
"Intel E5 v3 DDR Broadcast" rev 0x02 at pci15 dev 22 function 7 not
configured
"Intel E5 v3 Thermal" rev 0x02 at pci15 dev 23 function 0 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci15 dev 23 function 4 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci15 dev 23 function 5 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci15 dev 23 function 6 not configured
"Intel E5 v3 DDRIO" rev 0x02 at pci15 dev 23 function 7 not configured
"Intel E5 v3 PCU" rev 0x02 at pci15 dev 30 function 0 not configured
"Intel E5 v3 PCU" rev 0x02 at pci15 dev 30 function 1 not configured
"Intel E5 v3 PCU" rev 0x02 at pci15 dev 30 function 2 not configured
"Intel E5 v3 PCU" rev 0x02 at pci15 dev 30 function 3 not configured
"Intel E5 v3 PCU" rev 0x02 at pci15 dev 30 function 4 not configured
"Intel E5 v3 VCU" rev 0x02 at pci15 dev 31 function 0 not configured
"Intel E5 v3 VCU" rev 0x02 at pci15 dev 31 function 2 not configured
pci16 at mainbus0 bus 128
ppb13 at pci16 dev 0 function 0 "Intel E5 v3 PCIE" rev 0x02
pci17 at ppb13 bus 139
ppb14 at pci16 dev 1 function 0 "Intel E5 v3 PCIE" rev 0x02
pci18 at ppb14 bus 129
ppb15 at pci16 dev 1 function 1 "Intel E5 v3 PCIE" rev 0x02
pci19 at ppb15 bus 136
ppb16 at pci16 dev 2 function 0 "Intel E5 v3 PCIE" rev 0x02
pci20 at ppb16 bus 130
ppb17 at pci16 dev 2 function 1 "Intel E5 v3 PCIE" rev 0x02
pci21 at ppb17 bus 137
ppb18 at pci16 dev 2 function 2 "Intel E5 v3 PCIE" rev 0x02
pci22 at ppb18 bus 131
ppb19 at pci16 dev 2 function 3 "Intel E5 v3 PCIE" rev 0x02
pci23 at ppb19 bus 138
ppb20 at pci16 dev 3 function 0 "Intel E5 v3 PCIE" rev 0x02
pci24 at ppb20 bus 132
ppb21 at pci16 dev 3 function 1 "Intel E5 v3 PCIE" rev 0x02
pci25 at ppb21 bus 133
ppb22 at pci16 dev 3 function 2 "Intel E5 v3 PCIE" rev 0x02
pci26 at ppb22 bus 134
ppb23 at pci16 dev 3 function 3 "Intel E5 v3 PCIE" rev 0x02
pci27 at ppb23 bus 135
"Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 0 not configured
"Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 1 not configured
"Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 2 not configured
"Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 3 not configured
"Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 4 not configured
"Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 5 not configured
"Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 6 not configured
"Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 7 not configured
"Intel E5 v3 Address Map" rev 0x02 at pci16 dev 5 function 0 not configured
"Intel E5 v3 Hot Plug" rev 0x02 at pci16 dev 5 function 1 not configured
"Intel E5 v3 Error Reporting" rev 0x02 at pci16 dev 5 function 2 not
configured
"Intel E5 v3 I/O APIC" rev 0x02 at pci16 dev 5 function 4 not configured
efifb0 at mainbus0
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uhub2 at uhub0 port 3 "Standard Microsystems product 0x2660" rev
2.00/8.01 addr 2
umass0 at uhub0 port 21 configuration 1 interface 0 "innostor USB 3.0"
rev 3.00/0.01 addr 3
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <IS917, innostor, 1.00> SCSI4 0/direct
removable serial.1f750917120722181203
sd1: 15000MB, 512 bytes/sector, 30720000 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (bd36a419525ca0cb.a) swap on sd0b dump on sd0b
uhidev0 at uhub1 port 1 configuration 1 interface 0 "BMC Virtual
Keyboard" rev 1.10/0.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "BMC Virtual
Keyboard" rev 1.10/0.02 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse0 detached
ums0 detached
uhidev1 detached
uhidev0 at uhub1 port 1 configuration 1 interface 0 "BMC Virtual
Keyboard" rev 1.10/0.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "BMC Virtual
Keyboard" rev 1.10/0.02 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse0 detached
ums0 detached
uhidev1 detached
uhidev0 at uhub1 port 1 configuration 1 interface 0 "BMC Virtual
Keyboard" rev 1.10/0.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "BMC Virtual
Keyboard" rev 1.10/0.02 addr 2
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons
wsmouse0 at ums0 mux 0
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev0 detached
wsmouse0 detached
ums0 detached
uhidev1 detached
uid 0 on /usr: out of inodes
uid 0 on /usr: out of inodes
uid 0 on /usr: out of inodes

Reply | Threaded
Open this post in threaded view
|

Re: Not enough inodes on /usr for ports/xenocara

Amit Kulkarni-5
On Tue, Jun 14, 2016 at 8:41 AM, Marc Peters <[hidden email]> wrote:

> Hi,
>
> i just did an installation of a HP DL360 Gen9 to test UEFI installations
> with 5.9. I just accepted most of the defaults and did this for the
> disklabels, too. I wanted to checkout the sources to do release builds,
> but the autolayout didn't create enough inodes to do so:
>
> [snip]
> U xenocara/xserver/composite/Makefile.am
> U xenocara/xserver/composite/Makefile.in
> U xenocara/xserver/composite/compalloc.c
> U xenocara/xserver/composite/compext.c
> U xenocara/xserver/composite/compinit.c
> U xenocara/xserver/composite/compint.h
> U xenocara/xserver/composite/compositeext.h
> U xenocara/xserver/composite/compoverlay.c
> U xenocara/xserver/composite/compwindow.c
>
> /usr: create/symlink failed, no inodes free
> cvs [checkout aborted]: cannot open
> xenocara/xserver/config/CVS/Repository: No space left on device
>
> The layout is:
>
> /usr # df -ikl
> Filesystem  1K-blocks      Used     Avail Capacity iused   ifree  %iused
>  Mounted on
> /dev/sd0a     1028878     53078    924358     5%    1767  154135     1%   /
> /dev/sd0l   202395708         4 192275920     0%       1 12794877     0%
>   /home
> /dev/sd0d     4125390        10   3919112     0%       6  545656     0%
>   /tmp
> /dev/sd0f     2061054   1578084    379918    81%  285822       0   100%
>   /usr
> /dev/sd0g     1028878    214660    762776    22%    9218  146684     6%
>   /usr/X11R6
> /dev/sd0h    10318462     26502   9776038     0%    1820 1323362     0%
>   /usr/local
> /dev/sd0k     2061054         2   1958000     0%       1  285821     0%
>   /usr/obj
> /dev/sd0j     2061054    805962   1152040    41%  110019  175803    38%
>   /usr/src
> /dev/sd0e    36618012      5154  34781958     0%     186 4676932     0%
>   /var
>
>
/usr/{src/obj} is usually allocated 2 GB, you have the same 2 GB allocated
for /usr (df -h might be friendlier to see and confirm). I usually mount
/usr/ports with 100 GB (thinking of splitting it some more), /usr/xenocara
with 1-2 GB, and /usr/xobj with 1-2 GB.

If this is a newly installed machine and you don't want to fiddle with it,
you can symlink /usr/xenocara to /home/marc/. But I would re-install with
the correct layout. It usually takes a few tries to get it right for your
workflow.

Good luck!
Reply | Threaded
Open this post in threaded view
|

Re: Not enough inodes on /usr for ports/xenocara

Jeremie Courreges-Anglas-2
Amit Kulkarni <[hidden email]> writes:

> On Tue, Jun 14, 2016 at 8:41 AM, Marc Peters <[hidden email]> wrote:
>
>> Hi,
>>
>> i just did an installation of a HP DL360 Gen9 to test UEFI installations
>> with 5.9. I just accepted most of the defaults and did this for the
>> disklabels, too. I wanted to checkout the sources to do release builds,
>> but the autolayout didn't create enough inodes to do so:
>>
>> [snip]
>> U xenocara/xserver/composite/Makefile.am
>> U xenocara/xserver/composite/Makefile.in
>> U xenocara/xserver/composite/compalloc.c
>> U xenocara/xserver/composite/compext.c
>> U xenocara/xserver/composite/compinit.c
>> U xenocara/xserver/composite/compint.h
>> U xenocara/xserver/composite/compositeext.h
>> U xenocara/xserver/composite/compoverlay.c
>> U xenocara/xserver/composite/compwindow.c
>>
>> /usr: create/symlink failed, no inodes free
>> cvs [checkout aborted]: cannot open
>> xenocara/xserver/config/CVS/Repository: No space left on device
>>
>> The layout is:
>>
>> /usr # df -ikl
>> Filesystem  1K-blocks      Used     Avail Capacity iused   ifree  %iused
>>  Mounted on
>> /dev/sd0a     1028878     53078    924358     5%    1767  154135     1%   /
>> /dev/sd0l   202395708         4 192275920     0%       1 12794877     0%
>>   /home
>> /dev/sd0d     4125390        10   3919112     0%       6  545656     0%
>>   /tmp
>> /dev/sd0f     2061054   1578084    379918    81%  285822       0   100%
>>   /usr
>> /dev/sd0g     1028878    214660    762776    22%    9218  146684     6%
>>   /usr/X11R6
>> /dev/sd0h    10318462     26502   9776038     0%    1820 1323362     0%
>>   /usr/local
>> /dev/sd0k     2061054         2   1958000     0%       1  285821     0%
>>   /usr/obj
>> /dev/sd0j     2061054    805962   1152040    41%  110019  175803    38%
>>   /usr/src
>> /dev/sd0e    36618012      5154  34781958     0%     186 4676932     0%
>>   /var
>>
>>
> /usr/{src/obj} is usually allocated 2 GB, you have the same 2 GB allocated
> for /usr (df -h might be friendlier to see and confirm). I usually mount
> /usr/ports with 100 GB (thinking of splitting it some more), /usr/xenocara
> with 1-2 GB,

Yup,

/dev/sd1l      982M    633M    300M    68%    /usr/xenocara

> and /usr/xobj with 1-2 GB.

An alternative:

  XOBJDIR = /usr/obj/xobj

in mk.conf(5)

> If this is a newly installed machine and you don't want to fiddle with it,
> you can symlink /usr/xenocara to /home/marc/. But I would re-install with
> the correct layout. It usually takes a few tries to get it right for your
> workflow.
>
> Good luck!

--
jca | PGP : 0x1524E7EE / 5135 92C1 AD36 5293 2BDF  DDCC 0DFA 74AE 1524 E7EE

Reply | Threaded
Open this post in threaded view
|

Re: Not enough inodes on /usr for ports/xenocara

Jeremie Courreges-Anglas-2
In reply to this post by Marc Peters-3
Marc Peters <[hidden email]> writes:

> Hi,
>
> i just did an installation of a HP DL360 Gen9 to test UEFI installations
> with 5.9. I just accepted most of the defaults and did this for the
> disklabels, too. I wanted to checkout the sources to do release builds,
> but the autolayout didn't create enough inodes to do so:
>
> [snip]

Quickfix: newfs -O 2.  FFS2 allocates inodes lazily.

--
jca | PGP : 0x1524E7EE / 5135 92C1 AD36 5293 2BDF  DDCC 0DFA 74AE 1524 E7EE

Reply | Threaded
Open this post in threaded view
|

Re: Not enough inodes on /usr for ports/xenocara

Otto Moerbeek
On Tue, Jun 14, 2016 at 06:14:05PM +0200, Jeremie Courreges-Anglas wrote:

> Marc Peters <[hidden email]> writes:
>
> > Hi,
> >
> > i just did an installation of a HP DL360 Gen9 to test UEFI installations
> > with 5.9. I just accepted most of the defaults and did this for the
> > disklabels, too. I wanted to checkout the sources to do release builds,
> > but the autolayout didn't create enough inodes to do so:
> >
> > [snip]
>
> Quickfix: newfs -O 2.  FFS2 allocates inodes lazily.

I do not believe that. Lazy allocation does not change the max.

        -Otto

Reply | Threaded
Open this post in threaded view
|

Re: Not enough inodes on /usr for ports/xenocara

Otto Moerbeek
In reply to this post by Marc Peters-3
On Tue, Jun 14, 2016 at 03:41:11PM +0200, Marc Peters wrote:

> Hi,
>
> i just did an installation of a HP DL360 Gen9 to test UEFI installations
> with 5.9. I just accepted most of the defaults and did this for the
> disklabels, too. I wanted to checkout the sources to do release builds,
> but the autolayout didn't create enough inodes to do so:
>
> [snip]
> U xenocara/xserver/composite/Makefile.am
> U xenocara/xserver/composite/Makefile.in
> U xenocara/xserver/composite/compalloc.c
> U xenocara/xserver/composite/compext.c
> U xenocara/xserver/composite/compinit.c
> U xenocara/xserver/composite/compint.h
> U xenocara/xserver/composite/compositeext.h
> U xenocara/xserver/composite/compoverlay.c
> U xenocara/xserver/composite/compwindow.c
>
> /usr: create/symlink failed, no inodes free
> cvs [checkout aborted]: cannot open
> xenocara/xserver/config/CVS/Repository: No space left on device
>
> The layout is:
>
> /usr # df -ikl
> Filesystem  1K-blocks      Used     Avail Capacity iused   ifree  %iused
>  Mounted on
> /dev/sd0a     1028878     53078    924358     5%    1767  154135     1%   /
> /dev/sd0l   202395708         4 192275920     0%       1 12794877     0%
>   /home
> /dev/sd0d     4125390        10   3919112     0%       6  545656     0%
>   /tmp
> /dev/sd0f     2061054   1578084    379918    81%  285822       0   100%
>   /usr
> /dev/sd0g     1028878    214660    762776    22%    9218  146684     6%
>   /usr/X11R6
> /dev/sd0h    10318462     26502   9776038     0%    1820 1323362     0%
>   /usr/local
> /dev/sd0k     2061054         2   1958000     0%       1  285821     0%
>   /usr/obj
> /dev/sd0j     2061054    805962   1152040    41%  110019  175803    38%
>   /usr/src
> /dev/sd0e    36618012      5154  34781958     0%     186 4676932     0%
>   /var
>
> The disk is a 300G SAS:
> /usr # dmesg | grep sd0
> sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 1.18> SCSI3 0/direct
> fixed
> sd0: 286070MB, 512 bytes/sector, 585871964 sectors
> root on sd0a (bd36a419525ca0cb.a) swap on sd0b dump on sd0b
>
> Maybe the caclculation of the autolayout can be adjusted to provide
> enough inodes to checkout the sources and build the system.

If you want to use a machine to build ports, you'll be needing much
more space anyway. Adding a separate /usr/ports is the way to go in
that case.

        -Otto

>
>
> Marc
>
> dmesg:
> OpenBSD 5.9 (GENERIC.MP) #1888: Fri Feb 26 01:20:19 MST 2016
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 34208731136 (32623MB)
> avail mem = 33167773696 (31631MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x788cc000 (216 entries)
> bios0: vendor HP version "P89" date 08/26/2014
> bios0: HP ProLiant DL360 Gen9
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S5
> acpi0: tables DSDT FACP UEFI MCEJ SSDT HEST BERT ERST EINJ HPET PMCT
> WDDT APIC MCFG SLIT SRAT SPMI RASF SPCR MSCT BDAT PCCT DMAR SSDT SSDT
> SSDT BGRT
> acpi0: wakeup devices PEX4(S4) BR05(S4) BR03(S4) BR07(S4) BR11(S4)
> BR13(S4) BR15(S4) BR17(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.53 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: failed to identify
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: failed to identify
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: failed to identify
> cpu3: smt 0, core 3, package 0
> cpu4 at mainbus0: apid 8 (application processor)
> cpu4: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu4:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu4: 256KB 64b/line 8-way L2 cache
> cpu4: failed to identify
> cpu4: smt 0, core 4, package 0
> cpu5 at mainbus0: apid 10 (application processor)
> cpu5: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu5:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu5: 256KB 64b/line 8-way L2 cache
> cpu5: failed to identify
> cpu5: smt 0, core 5, package 0
> cpu6 at mainbus0: apid 16 (application processor)
> cpu6: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu6:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu6: 256KB 64b/line 8-way L2 cache
> cpu6: failed to identify
> cpu6: smt 0, core 0, package 1
> cpu7 at mainbus0: apid 18 (application processor)
> cpu7: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu7:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu7: 256KB 64b/line 8-way L2 cache
> cpu7: failed to identify
> cpu7: smt 0, core 1, package 1
> cpu8 at mainbus0: apid 20 (application processor)
> cpu8: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu8:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu8: 256KB 64b/line 8-way L2 cache
> cpu8: failed to identify
> cpu8: smt 0, core 2, package 1
> cpu9 at mainbus0: apid 22 (application processor)
> cpu9: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu9:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu9: 256KB 64b/line 8-way L2 cache
> cpu9: failed to identify
> cpu9: smt 0, core 3, package 1
> cpu10 at mainbus0: apid 24 (application processor)
> cpu10: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu10:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu10: 256KB 64b/line 8-way L2 cache
> cpu10: failed to identify
> cpu10: smt 0, core 4, package 1
> cpu11 at mainbus0: apid 26 (application processor)
> cpu11: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu11:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu11: 256KB 64b/line 8-way L2 cache
> cpu11: failed to identify
> cpu11: smt 0, core 5, package 1
> cpu12 at mainbus0: apid 1 (application processor)
> cpu12: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu12:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu12: 256KB 64b/line 8-way L2 cache
> cpu12: failed to identify
> cpu12: smt 1, core 0, package 0
> cpu13 at mainbus0: apid 3 (application processor)
> cpu13: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu13:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu13: 256KB 64b/line 8-way L2 cache
> cpu13: failed to identify
> cpu13: smt 1, core 1, package 0
> cpu14 at mainbus0: apid 5 (application processor)
> cpu14: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu14:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu14: 256KB 64b/line 8-way L2 cache
> cpu14: failed to identify
> cpu14: smt 1, core 2, package 0
> cpu15 at mainbus0: apid 7 (application processor)
> cpu15: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu15:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu15: 256KB 64b/line 8-way L2 cache
> cpu15: failed to identify
> cpu15: smt 1, core 3, package 0
> cpu16 at mainbus0: apid 9 (application processor)
> cpu16: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu16:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu16: 256KB 64b/line 8-way L2 cache
> cpu16: failed to identify
> cpu16: smt 1, core 4, package 0
> cpu17 at mainbus0: apid 11 (application processor)
> cpu17: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu17:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu17: 256KB 64b/line 8-way L2 cache
> cpu17: failed to identify
> cpu17: smt 1, core 5, package 0
> cpu18 at mainbus0: apid 17 (application processor)
> cpu18: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu18:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu18: 256KB 64b/line 8-way L2 cache
> cpu18: failed to identify
> cpu18: smt 1, core 0, package 1
> cpu19 at mainbus0: apid 19 (application processor)
> cpu19: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu19:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu19: 256KB 64b/line 8-way L2 cache
> cpu19: failed to identify
> cpu19: smt 1, core 1, package 1
> cpu20 at mainbus0: apid 21 (application processor)
> cpu20: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu20:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu20: 256KB 64b/line 8-way L2 cache
> cpu20: failed to identify
> cpu20: smt 1, core 2, package 1
> cpu21 at mainbus0: apid 23 (application processor)
> cpu21: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu21:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu21: 256KB 64b/line 8-way L2 cache
> cpu21: failed to identify
> cpu21: smt 1, core 3, package 1
> cpu22 at mainbus0: apid 25 (application processor)
> cpu22: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu22:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu22: 256KB 64b/line 8-way L2 cache
> cpu22: failed to identify
> cpu22: smt 1, core 4, package 1
> cpu23 at mainbus0: apid 27 (application processor)
> cpu23: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz, 2397.23 MHz
> cpu23:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,SENSOR,ARAT
> cpu23: 256KB 64b/line 8-way L2 cache
> cpu23: failed to identify
> cpu23: smt 1, core 5, package 1
> ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0: apid 9 pa 0xfec01000, version 20, 24 pins
> ioapic2 at mainbus0: apid 10 pa 0xfec40000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0x80000000, bus 0-255
> acpiprt0 at acpi0: bus 127 (UNC0)
> acpiprt1 at acpi0: bus 255 (UNC1)
> acpiprt2 at acpi0: bus 0 (PCI0)
> acpiprt3 at acpi0: bus 1 (PEX2)
> acpiprt4 at acpi0: bus 2 (PEX4)
> acpiprt5 at acpi0: bus 3 (BR01)
> acpiprt6 at acpi0: bus 4 (BR05)
> acpiprt7 at acpi0: bus 5 (BR03)
> acpiprt8 at acpi0: bus 8 (BR07)
> acpiprt9 at acpi0: bus 128 (PCI1)
> acpicpu0 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu1 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu2 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu3 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu4 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu5 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu6 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu7 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu8 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu9 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu10 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu11 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu12 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu13 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu14 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu15 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu16 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu17 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu18 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu19 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu20 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu21 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu22 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> acpicpu23 at acpi0: C2(350@41 io@0x415), C1(1000@1 halt)
> ipmi at mainbus0 not configured
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel E5 v3 Host" rev 0x02
> ppb0 at pci0 dev 1 function 0 "Intel E5 v3 PCIE" rev 0x02
> pci1 at ppb0 bus 3
> ciss0 at pci1 dev 0 function 0 "Hewlett-Packard Smart Array" rev 0x01:
> apic 8 int 16
> ciss0: 1 LD, HW rev 1, FW 1.18/1.18, 64bit fifo rro
> scsibus1 at ciss0: 1 targets
> sd0 at scsibus1 targ 0 lun 0: <HP, LOGICAL VOLUME, 1.18> SCSI3 0/direct
> fixed
> sd0: 286070MB, 512 bytes/sector, 585871964 sectors
> ppb1 at pci0 dev 1 function 1 "Intel E5 v3 PCIE" rev 0x02
> pci2 at ppb1 bus 12
> ppb2 at pci0 dev 2 function 0 "Intel E5 v3 PCIE" rev 0x02: msi
> pci3 at ppb2 bus 5
> ppb3 at pci0 dev 2 function 1 "Intel E5 v3 PCIE" rev 0x02
> pci4 at ppb3 bus 13
> ppb4 at pci0 dev 2 function 2 "Intel E5 v3 PCIE" rev 0x02
> pci5 at ppb4 bus 4
> ppb5 at pci0 dev 2 function 3 "Intel E5 v3 PCIE" rev 0x02
> pci6 at ppb5 bus 14
> ppb6 at pci0 dev 3 function 0 "Intel E5 v3 PCIE" rev 0x02: msi
> pci7 at ppb6 bus 8
> ppb7 at pci0 dev 3 function 1 "Intel E5 v3 PCIE" rev 0x02
> pci8 at ppb7 bus 15
> ppb8 at pci0 dev 3 function 2 "Intel E5 v3 PCIE" rev 0x02
> pci9 at ppb8 bus 11
> ppb9 at pci0 dev 3 function 3 "Intel E5 v3 PCIE" rev 0x02
> pci10 at ppb9 bus 16
> "Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 0 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 1 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 2 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 3 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 4 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 5 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 6 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci0 dev 4 function 7 not configured
> "Intel E5 v3 Address Map" rev 0x02 at pci0 dev 5 function 0 not configured
> "Intel E5 v3 Hot Plug" rev 0x02 at pci0 dev 5 function 1 not configured
> "Intel E5 v3 Error Reporting" rev 0x02 at pci0 dev 5 function 2 not
> configured
> "Intel E5 v3 I/O APIC" rev 0x02 at pci0 dev 5 function 4 not configured
> "Intel C610 MS SPSR" rev 0x05 at pci0 dev 17 function 0 not configured
> xhci0 at pci0 dev 20 function 0 "Intel C610 xHCI" rev 0x05: apic 8 int 19
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> ppb10 at pci0 dev 28 function 0 "Intel C610 PCIE" rev 0xd5
> pci11 at ppb10 bus 17
> ppb11 at pci0 dev 28 function 2 "Intel C610 PCIE" rev 0xd5: msi
> pci12 at ppb11 bus 1
> "Hewlett-Packard iLO3 Slave" rev 0x06 at pci12 dev 0 function 0 not
> configured
> "Matrox MGA G200eH" rev 0x01 at pci12 dev 0 function 1 not configured
> "Hewlett-Packard iLO3 Management" rev 0x06 at pci12 dev 0 function 2 not
> configured
> uhci0 at pci12 dev 0 function 4 "Hewlett-Packard USB" rev 0x03: apic 8
> int 19
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Hewlett-Packard UHCI root hub" rev 1.00/1.00 addr 1
> ppb12 at pci0 dev 28 function 4 "Intel C610 PCIE" rev 0xd5: msi
> pci13 at ppb12 bus 2
> bge0 at pci13 dev 0 function 0 "Broadcom BCM5719" rev 0x01, unknown
> BCM5719 (0x5719001), APE firmware NCSI 1.2.46.0: msi, address
> c4:34:6b:b9:48:a0
> brgphy0 at bge0 phy 1: BCM5719C 10/100/1000baseT PHY, rev. 0
> bge1 at pci13 dev 0 function 1 "Broadcom BCM5719" rev 0x01, unknown
> BCM5719 (0x5719001), APE firmware NCSI 1.2.46.0: msi, address
> c4:34:6b:b9:48:a1
> brgphy1 at bge1 phy 2: BCM5719C 10/100/1000baseT PHY, rev. 0
> bge2 at pci13 dev 0 function 2 "Broadcom BCM5719" rev 0x01, unknown
> BCM5719 (0x5719001), APE firmware NCSI 1.2.46.0: msi, address
> c4:34:6b:b9:48:a2
> brgphy2 at bge2 phy 3: BCM5719C 10/100/1000baseT PHY, rev. 0
> bge3 at pci13 dev 0 function 3 "Broadcom BCM5719" rev 0x01, unknown
> BCM5719 (0x5719001), APE firmware NCSI 1.2.46.0: msi, address
> c4:34:6b:b9:48:a3
> brgphy3 at bge3 phy 4: BCM5719C 10/100/1000baseT PHY, rev. 0
> pcib0 at pci0 dev 31 function 0 "Intel C610 LPC" rev 0x05
> ahci0 at pci0 dev 31 function 2 "Intel C610 AHCI" rev 0x05: msi, AHCI 1.3
> ahci0: port 5: 1.5Gb/s
> scsibus2 at ahci0: 32 targets
> cd0 at scsibus2 targ 5 lun 0: <hp, DVDRAM GU90N, W901> ATAPI 5/cdrom
> removable
> ichiic0 at pci0 dev 31 function 3 "Intel C610 SMBus" rev 0x05: apic 8 int 18
> iic0 at ichiic0
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> com1: probed fifo depth: 0 bytes
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> pci14 at mainbus0 bus 127
> 127:30:3: mem address conflict 0x10/0x10
> "Intel E5 v3 QPI" rev 0x02 at pci14 dev 8 function 0 not configured
> "Intel E5 v3 QPI" rev 0x02 at pci14 dev 8 function 3 not configured
> "Intel E5 v3 QPI Monitor" rev 0x02 at pci14 dev 11 function 0 not configured
> "Intel E5 v3 QPI Monitor" rev 0x02 at pci14 dev 11 function 1 not configured
> "Intel E5 v3 QPI Monitor" rev 0x02 at pci14 dev 11 function 2 not configured
> "Intel E5 v3 Unicast" rev 0x02 at pci14 dev 12 function 0 not configured
> "Intel E5 v3 Unicast" rev 0x02 at pci14 dev 12 function 1 not configured
> "Intel E5 v3 Unicast" rev 0x02 at pci14 dev 12 function 2 not configured
> "Intel E5 v3 Unicast" rev 0x02 at pci14 dev 12 function 3 not configured
> "Intel E5 v3 Unicast" rev 0x02 at pci14 dev 12 function 4 not configured
> "Intel E5 v3 Unicast" rev 0x02 at pci14 dev 12 function 5 not configured
> "Intel E5 v3 Ring Agent" rev 0x02 at pci14 dev 15 function 0 not configured
> "Intel E5 v3 Ring Agent" rev 0x02 at pci14 dev 15 function 1 not configured
> "Intel E5 v3 SAD" rev 0x02 at pci14 dev 15 function 4 not configured
> "Intel E5 v3 SAD" rev 0x02 at pci14 dev 15 function 5 not configured
> "Intel E5 v3 SAD" rev 0x02 at pci14 dev 15 function 6 not configured
> "Intel E5 v3 PCIE Ring" rev 0x02 at pci14 dev 16 function 0 not configured
> "Intel E5 v3 PCIE Monitor" rev 0x02 at pci14 dev 16 function 1 not
> configured
> "Intel E5 v3 Scratch" rev 0x02 at pci14 dev 16 function 5 not configured
> "Intel E5 v3 Scratch" rev 0x02 at pci14 dev 16 function 6 not configured
> "Intel E5 v3 Scratch" rev 0x02 at pci14 dev 16 function 7 not configured
> "Intel E5 v3 Home Agent" rev 0x02 at pci14 dev 18 function 0 not configured
> "Intel E5 v3 Home Agent" rev 0x02 at pci14 dev 18 function 1 not configured
> "Intel E5 v3 Home Agent Debug" rev 0x02 at pci14 dev 18 function 2 not
> configured
> "Intel E5 v3 Memory" rev 0x02 at pci14 dev 19 function 0 not configured
> "Intel E5 v3 RAS" rev 0x02 at pci14 dev 19 function 1 not configured
> "Intel E5 v3 TAD" rev 0x02 at pci14 dev 19 function 2 not configured
> "Intel E5 v3 TAD" rev 0x02 at pci14 dev 19 function 3 not configured
> "Intel E5 v3 TAD" rev 0x02 at pci14 dev 19 function 4 not configured
> "Intel E5 v3 TAD" rev 0x02 at pci14 dev 19 function 5 not configured
> "Intel E5 v3 DDR Broadcast" rev 0x02 at pci14 dev 19 function 6 not
> configured
> "Intel E5 v3 DDR Broadcast" rev 0x02 at pci14 dev 19 function 7 not
> configured
> "Intel E5 v3 Thermal" rev 0x02 at pci14 dev 20 function 0 not configured
> "Intel E5 v3 Thermal" rev 0x02 at pci14 dev 20 function 1 not configured
> "Intel E5 v3 Error" rev 0x02 at pci14 dev 20 function 2 not configured
> "Intel E5 v3 Error" rev 0x02 at pci14 dev 20 function 3 not configured
> "Intel E5 v3 DDRIO" rev 0x02 at pci14 dev 20 function 6 not configured
> "Intel E5 v3 DDRIO" rev 0x02 at pci14 dev 20 function 7 not configured
> "Intel E5 v3 Thermal" rev 0x02 at pci14 dev 21 function 0 not configured
> "Intel E5 v3 Thermal" rev 0x02 at pci14 dev 21 function 1 not configured
> "Intel E5 v3 Error" rev 0x02 at pci14 dev 21 function 2 not configured
> "Intel E5 v3 Error" rev 0x02 at pci14 dev 21 function 3 not configured
> "Intel E5 v3 TA" rev 0x02 at pci14 dev 22 function 0 not configured
> "Intel E5 v3 DDR Broadcast" rev 0x02 at pci14 dev 22 function 6 not
> configured
> "Intel E5 v3 DDR Broadcast" rev 0x02 at pci14 dev 22 function 7 not
> configured
> "Intel E5 v3 Thermal" rev 0x02 at pci14 dev 23 function 0 not configured
> "Intel E5 v3 DDRIO" rev 0x02 at pci14 dev 23 function 4 not configured
> "Intel E5 v3 DDRIO" rev 0x02 at pci14 dev 23 function 5 not configured
> "Intel E5 v3 DDRIO" rev 0x02 at pci14 dev 23 function 6 not configured
> "Intel E5 v3 DDRIO" rev 0x02 at pci14 dev 23 function 7 not configured
> "Intel E5 v3 PCU" rev 0x02 at pci14 dev 30 function 0 not configured
> "Intel E5 v3 PCU" rev 0x02 at pci14 dev 30 function 1 not configured
> "Intel E5 v3 PCU" rev 0x02 at pci14 dev 30 function 2 not configured
> "Intel E5 v3 PCU" rev 0x02 at pci14 dev 30 function 3 not configured
> "Intel E5 v3 PCU" rev 0x02 at pci14 dev 30 function 4 not configured
> "Intel E5 v3 VCU" rev 0x02 at pci14 dev 31 function 0 not configured
> "Intel E5 v3 VCU" rev 0x02 at pci14 dev 31 function 2 not configured
> pci15 at mainbus0 bus 255
> 255:30:3: mem address conflict 0x10/0x10
> "Intel E5 v3 QPI" rev 0x02 at pci15 dev 8 function 0 not configured
> "Intel E5 v3 QPI" rev 0x02 at pci15 dev 8 function 3 not configured
> "Intel E5 v3 QPI Monitor" rev 0x02 at pci15 dev 11 function 0 not configured
> "Intel E5 v3 QPI Monitor" rev 0x02 at pci15 dev 11 function 1 not configured
> "Intel E5 v3 QPI Monitor" rev 0x02 at pci15 dev 11 function 2 not configured
> "Intel E5 v3 Unicast" rev 0x02 at pci15 dev 12 function 0 not configured
> "Intel E5 v3 Unicast" rev 0x02 at pci15 dev 12 function 1 not configured
> "Intel E5 v3 Unicast" rev 0x02 at pci15 dev 12 function 2 not configured
> "Intel E5 v3 Unicast" rev 0x02 at pci15 dev 12 function 3 not configured
> "Intel E5 v3 Unicast" rev 0x02 at pci15 dev 12 function 4 not configured
> "Intel E5 v3 Unicast" rev 0x02 at pci15 dev 12 function 5 not configured
> "Intel E5 v3 Ring Agent" rev 0x02 at pci15 dev 15 function 0 not configured
> "Intel E5 v3 Ring Agent" rev 0x02 at pci15 dev 15 function 1 not configured
> "Intel E5 v3 SAD" rev 0x02 at pci15 dev 15 function 4 not configured
> "Intel E5 v3 SAD" rev 0x02 at pci15 dev 15 function 5 not configured
> "Intel E5 v3 SAD" rev 0x02 at pci15 dev 15 function 6 not configured
> "Intel E5 v3 PCIE Ring" rev 0x02 at pci15 dev 16 function 0 not configured
> "Intel E5 v3 PCIE Monitor" rev 0x02 at pci15 dev 16 function 1 not
> configured
> "Intel E5 v3 Scratch" rev 0x02 at pci15 dev 16 function 5 not configured
> "Intel E5 v3 Scratch" rev 0x02 at pci15 dev 16 function 6 not configured
> "Intel E5 v3 Scratch" rev 0x02 at pci15 dev 16 function 7 not configured
> "Intel E5 v3 Home Agent" rev 0x02 at pci15 dev 18 function 0 not configured
> "Intel E5 v3 Home Agent" rev 0x02 at pci15 dev 18 function 1 not configured
> "Intel E5 v3 Home Agent Debug" rev 0x02 at pci15 dev 18 function 2 not
> configured
> "Intel E5 v3 Memory" rev 0x02 at pci15 dev 19 function 0 not configured
> "Intel E5 v3 RAS" rev 0x02 at pci15 dev 19 function 1 not configured
> "Intel E5 v3 TAD" rev 0x02 at pci15 dev 19 function 2 not configured
> "Intel E5 v3 TAD" rev 0x02 at pci15 dev 19 function 3 not configured
> "Intel E5 v3 TAD" rev 0x02 at pci15 dev 19 function 4 not configured
> "Intel E5 v3 TAD" rev 0x02 at pci15 dev 19 function 5 not configured
> "Intel E5 v3 DDR Broadcast" rev 0x02 at pci15 dev 19 function 6 not
> configured
> "Intel E5 v3 DDR Broadcast" rev 0x02 at pci15 dev 19 function 7 not
> configured
> "Intel E5 v3 Thermal" rev 0x02 at pci15 dev 20 function 0 not configured
> "Intel E5 v3 Thermal" rev 0x02 at pci15 dev 20 function 1 not configured
> "Intel E5 v3 Error" rev 0x02 at pci15 dev 20 function 2 not configured
> "Intel E5 v3 Error" rev 0x02 at pci15 dev 20 function 3 not configured
> "Intel E5 v3 DDRIO" rev 0x02 at pci15 dev 20 function 6 not configured
> "Intel E5 v3 DDRIO" rev 0x02 at pci15 dev 20 function 7 not configured
> "Intel E5 v3 Thermal" rev 0x02 at pci15 dev 21 function 0 not configured
> "Intel E5 v3 Thermal" rev 0x02 at pci15 dev 21 function 1 not configured
> "Intel E5 v3 Error" rev 0x02 at pci15 dev 21 function 2 not configured
> "Intel E5 v3 Error" rev 0x02 at pci15 dev 21 function 3 not configured
> "Intel E5 v3 TA" rev 0x02 at pci15 dev 22 function 0 not configured
> "Intel E5 v3 DDR Broadcast" rev 0x02 at pci15 dev 22 function 6 not
> configured
> "Intel E5 v3 DDR Broadcast" rev 0x02 at pci15 dev 22 function 7 not
> configured
> "Intel E5 v3 Thermal" rev 0x02 at pci15 dev 23 function 0 not configured
> "Intel E5 v3 DDRIO" rev 0x02 at pci15 dev 23 function 4 not configured
> "Intel E5 v3 DDRIO" rev 0x02 at pci15 dev 23 function 5 not configured
> "Intel E5 v3 DDRIO" rev 0x02 at pci15 dev 23 function 6 not configured
> "Intel E5 v3 DDRIO" rev 0x02 at pci15 dev 23 function 7 not configured
> "Intel E5 v3 PCU" rev 0x02 at pci15 dev 30 function 0 not configured
> "Intel E5 v3 PCU" rev 0x02 at pci15 dev 30 function 1 not configured
> "Intel E5 v3 PCU" rev 0x02 at pci15 dev 30 function 2 not configured
> "Intel E5 v3 PCU" rev 0x02 at pci15 dev 30 function 3 not configured
> "Intel E5 v3 PCU" rev 0x02 at pci15 dev 30 function 4 not configured
> "Intel E5 v3 VCU" rev 0x02 at pci15 dev 31 function 0 not configured
> "Intel E5 v3 VCU" rev 0x02 at pci15 dev 31 function 2 not configured
> pci16 at mainbus0 bus 128
> ppb13 at pci16 dev 0 function 0 "Intel E5 v3 PCIE" rev 0x02
> pci17 at ppb13 bus 139
> ppb14 at pci16 dev 1 function 0 "Intel E5 v3 PCIE" rev 0x02
> pci18 at ppb14 bus 129
> ppb15 at pci16 dev 1 function 1 "Intel E5 v3 PCIE" rev 0x02
> pci19 at ppb15 bus 136
> ppb16 at pci16 dev 2 function 0 "Intel E5 v3 PCIE" rev 0x02
> pci20 at ppb16 bus 130
> ppb17 at pci16 dev 2 function 1 "Intel E5 v3 PCIE" rev 0x02
> pci21 at ppb17 bus 137
> ppb18 at pci16 dev 2 function 2 "Intel E5 v3 PCIE" rev 0x02
> pci22 at ppb18 bus 131
> ppb19 at pci16 dev 2 function 3 "Intel E5 v3 PCIE" rev 0x02
> pci23 at ppb19 bus 138
> ppb20 at pci16 dev 3 function 0 "Intel E5 v3 PCIE" rev 0x02
> pci24 at ppb20 bus 132
> ppb21 at pci16 dev 3 function 1 "Intel E5 v3 PCIE" rev 0x02
> pci25 at ppb21 bus 133
> ppb22 at pci16 dev 3 function 2 "Intel E5 v3 PCIE" rev 0x02
> pci26 at ppb22 bus 134
> ppb23 at pci16 dev 3 function 3 "Intel E5 v3 PCIE" rev 0x02
> pci27 at ppb23 bus 135
> "Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 0 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 1 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 2 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 3 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 4 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 5 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 6 not configured
> "Intel E5 v3 DMA" rev 0x02 at pci16 dev 4 function 7 not configured
> "Intel E5 v3 Address Map" rev 0x02 at pci16 dev 5 function 0 not configured
> "Intel E5 v3 Hot Plug" rev 0x02 at pci16 dev 5 function 1 not configured
> "Intel E5 v3 Error Reporting" rev 0x02 at pci16 dev 5 function 2 not
> configured
> "Intel E5 v3 I/O APIC" rev 0x02 at pci16 dev 5 function 4 not configured
> efifb0 at mainbus0
> wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> uhub2 at uhub0 port 3 "Standard Microsystems product 0x2660" rev
> 2.00/8.01 addr 2
> umass0 at uhub0 port 21 configuration 1 interface 0 "innostor USB 3.0"
> rev 3.00/0.01 addr 3
> umass0: using SCSI over Bulk-Only
> scsibus3 at umass0: 2 targets, initiator 0
> sd1 at scsibus3 targ 1 lun 0: <IS917, innostor, 1.00> SCSI4 0/direct
> removable serial.1f750917120722181203
> sd1: 15000MB, 512 bytes/sector, 30720000 sectors
> vscsi0 at root
> scsibus4 at vscsi0: 256 targets
> softraid0 at root
> scsibus5 at softraid0: 256 targets
> root on sd0a (bd36a419525ca0cb.a) swap on sd0b dump on sd0b
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "BMC Virtual
> Keyboard" rev 1.10/0.02 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "BMC Virtual
> Keyboard" rev 1.10/0.02 addr 2
> uhidev1: iclass 3/1
> ums0 at uhidev1: 3 buttons
> wsmouse0 at ums0 mux 0
> wskbd1: disconnecting from wsdisplay0
> wskbd1 detached
> ukbd0 detached
> uhidev0 detached
> wsmouse0 detached
> ums0 detached
> uhidev1 detached
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "BMC Virtual
> Keyboard" rev 1.10/0.02 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "BMC Virtual
> Keyboard" rev 1.10/0.02 addr 2
> uhidev1: iclass 3/1
> ums0 at uhidev1: 3 buttons
> wsmouse0 at ums0 mux 0
> wskbd1: disconnecting from wsdisplay0
> wskbd1 detached
> ukbd0 detached
> uhidev0 detached
> wsmouse0 detached
> ums0 detached
> uhidev1 detached
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "BMC Virtual
> Keyboard" rev 1.10/0.02 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "BMC Virtual
> Keyboard" rev 1.10/0.02 addr 2
> uhidev1: iclass 3/1
> ums0 at uhidev1: 3 buttons
> wsmouse0 at ums0 mux 0
> wskbd1: disconnecting from wsdisplay0
> wskbd1 detached
> ukbd0 detached
> uhidev0 detached
> wsmouse0 detached
> ums0 detached
> uhidev1 detached
> uid 0 on /usr: out of inodes
> uid 0 on /usr: out of inodes
> uid 0 on /usr: out of inodes

Reply | Threaded
Open this post in threaded view
|

Re: Not enough inodes on /usr for ports/xenocara

Otto Moerbeek
In reply to this post by Jeremie Courreges-Anglas-2
On Tue, Jun 14, 2016 at 06:14:05PM +0200, Jeremie Courreges-Anglas wrote:

> Marc Peters <[hidden email]> writes:
>
> > Hi,
> >
> > i just did an installation of a HP DL360 Gen9 to test UEFI installations
> > with 5.9. I just accepted most of the defaults and did this for the
> > disklabels, too. I wanted to checkout the sources to do release builds,
> > but the autolayout didn't create enough inodes to do so:
> >
> > [snip]
>
> Quickfix: newfs -O 2.  FFS2 allocates inodes lazily.
>
> --
> jca | PGP : 0x1524E7EE / 5135 92C1 AD36 5293 2BDF  DDCC 0DFA 74AE 1524 E7EE

A 2G partition:

[otto@mini:14]$ sudo newfs sd0h
/dev/rsd0h: 2050.9MB in 4200256 sectors of 512 bytes
11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each

[otto@mini:15]$ sudo newfs -O2 sd0h
/dev/rsd0h: 2050.9MB in 4200256 sectors of 512 bytes
11 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each

No significant difference, Creating the fs with a higher inode density
is a way to get more inodes (but a separate /usr/ports is better):

[otto@mini:19]$ sudo newfs -i 4096 sd0h
/dev/rsd0h: 2050.9MB in 4200256 sectors of 512 bytes
13 cylinder groups of 168.72MB, 10798 blocks, 43264 inodes each

Reply | Threaded
Open this post in threaded view
|

Re: Not enough inodes on /usr for ports/xenocara

Jeremie Courreges-Anglas-2
Otto Moerbeek <[hidden email]> writes:

> On Tue, Jun 14, 2016 at 06:14:05PM +0200, Jeremie Courreges-Anglas wrote:
>
>> Marc Peters <[hidden email]> writes:
>>
>> > Hi,
>> >
>> > i just did an installation of a HP DL360 Gen9 to test UEFI installations
>> > with 5.9. I just accepted most of the defaults and did this for the
>> > disklabels, too. I wanted to checkout the sources to do release builds,
>> > but the autolayout didn't create enough inodes to do so:
>> >
>> > [snip]
>>
>> Quickfix: newfs -O 2.  FFS2 allocates inodes lazily.
>>
>> --
>> jca | PGP : 0x1524E7EE / 5135 92C1 AD36 5293 2BDF  DDCC 0DFA 74AE 1524 E7EE
>
> A 2G partition:
>
> [otto@mini:14]$ sudo newfs sd0h
> /dev/rsd0h: 2050.9MB in 4200256 sectors of 512 bytes
> 11 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
>
> [otto@mini:15]$ sudo newfs -O2 sd0h
> /dev/rsd0h: 2050.9MB in 4200256 sectors of 512 bytes
> 11 cylinder groups of 202.50MB, 12960 blocks, 25920 inodes each
>
> No significant difference, Creating the fs with a higher inode density
> is a way to get more inodes (but a separate /usr/ports is better):
>
> [otto@mini:19]$ sudo newfs -i 4096 sd0h
> /dev/rsd0h: 2050.9MB in 4200256 sectors of 512 bytes
> 13 cylinder groups of 168.72MB, 10798 blocks, 43264 inodes each

Duh, sorry Marc for the bad advice, and thanks Otto for the cluebat.

That's strange, there are probably reasons for this, but it just looked
like The Right Thing to me.  I should have verified this earlier. :-/

--
jca | PGP : 0x1524E7EE / 5135 92C1 AD36 5293 2BDF  DDCC 0DFA 74AE 1524 E7EE