|
|
|
|
Hi everybody,
I have installed OpenBSD on my USB flash memstick and when I inserted to my
PC USB port its X loaded without any errors.
But when I'm going to reboot my notebook (DELL E6410) by my USB memstick
its X did not load and the file /var/log/Xorg.0.log contain these below log:
==========================================================
/var/log/Xorg.0.log
[ 50.440] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
(Operation not permitted)
Check that you have set 'machdep.allowaperture=1'
in /etc/sysctl.conf and reboot your machine
refer to xf86(4) for details
[ 50.440] linear framebuffer access unavailable
[ 50.449] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility
mode (version 3.32)
[ 51.976]
X.Org X Server 1.16.4
Release Date: 2014-12-20
[ 51.976] X Protocol Version 11, Revision 0
[ 51.976] Build Operating System: OpenBSD 5.7 amd64
[ 51.976] Current Operating System: OpenBSD unix_usb.my.domain 5.7
GENERIC#825 amd64
[ 51.976] Build Date: 07 March 2015 03:49:57AM
[ 51.976]
[ 51.977] Current version of pixman: 0.32.6
[ 51.977] Before reporting problems, check http://wiki.x.orgto make sure that you have the latest version.
[ 51.977] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 51.977] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 14
16:59:53 2015
[ 51.984] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[ 51.990] (==) No Layout section. Using the first Screen section.
[ 51.990] (==) No screen section available. Using defaults.
[ 51.990] (**) |-->Screen "Default Screen Section" (0)
[ 51.992] (**) | |-->Monitor "<default monitor>"
[ 51.993] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 51.993] (==) Disabling SIGIO handlers for input devices
[ 51.995] (==) Automatically adding devices
[ 51.995] (==) Automatically enabling devices
[ 51.995] (==) Not automatically adding GPU devices
[ 52.028] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[ 52.028] (==) ModulePath set to "/usr/X11R6/lib/modules"
[ 52.028] (II) The server relies on wscons to provide the list of input
devices.
If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[ 52.029] (II) Loader magic: 0x1020c8e0b6e0
[ 52.029] (II) Module ABI versions:
[ 52.029] X.Org ANSI C Emulation: 0.4
[ 52.029] X.Org Video Driver: 18.0
[ 52.029] X.Org XInput driver : 21.0
[ 52.029] X.Org Server Extension : 8.0
[ 52.032] (--) PCI:*(0:1:0:0) 10de:0a6c:1028:040a rev 162, Mem @
0xe2000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @
0x00007000/128
[ 52.033] (II) LoadModule: "glx"
[ 52.041] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[ 52.160] (II) Module glx: vendor="X.Org Foundation"
[ 52.160] compiled for 1.16.4, module version = 1.0.0
[ 52.160] ABI class: X.Org Server Extension, version 8.0
[ 52.160] (==) AIGLX enabled
[ 52.160] (==) Matched nv as autoconfigured driver 0
[ 52.160] (==) Matched vesa as autoconfigured driver 1
[ 52.160] (==) Assigned the driver to the xf86ConfigLayout
[ 52.160] (II) LoadModule: "nv"
[ 52.160] (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.so
[ 52.169] (II) Module nv: vendor="X.Org Foundation"
[ 52.169] compiled for 1.16.4, module version = 2.1.20
[ 52.169] Module class: X.Org Video Driver
[ 52.169] ABI class: X.Org Video Driver, version 18.0
[ 52.169] (II) LoadModule: "vesa"
[ 52.169] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[ 52.172] (II) Module vesa: vendor="X.Org Foundation"
[ 52.172] compiled for 1.16.4, module version = 2.3.3
[ 52.172] Module class: X.Org Video Driver
[ 52.172] ABI class: X.Org Video Driver, version 18.0
[ 52.172] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA
TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
GeForce GTS 360M, Quadro FX 1800M
[ 52.173] (II) VESA: driver for VESA chipsets: vesa
[ 52.173] (--) NV: Found NVIDIA NVS 3100M at 01@00:00:0
[ 52.175] (WW) Falling back to old probe method for vesa
[ 52.175] (II) Loading sub module "int10"
[ 52.175] (II) LoadModule: "int10"
[ 52.178] (II) Loading /usr/X11R6/lib/modules/libint10.so
[ 52.187] (II) Module int10: vendor="X.Org Foundation"
[ 52.187] compiled for 1.16.4, module version = 1.0.0
[ 52.187] ABI class: X.Org Video Driver, version 18.0
[ 52.187] (II) NV(0): Initializing int10
[ 52.187] (EE) NV(0): Cannot read int vect
[ 52.187] (WW) NV(0): Failed to initialize the int10 module; the console
will not be restored.
[ 52.187] (II) NV(0): Creating default Display subsection in Screen
section
"Default Screen Section" for depth/fbbpp 24/32
[ 52.187] (==) NV(0): Depth 24, (--) framebuffer bpp 32
[ 52.187] (==) NV(0): RGB weight 888
[ 52.187] (==) NV(0): Default visual is TrueColor
[ 52.187] (==) NV(0): Using hardware cursor
[ 52.187] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 52.187] (EE) NV(0): Failed to map MMIO registers: Bad file descriptor
[ 52.187] (II) UnloadModule: "nv"
[ 52.187] (II) UnloadSubModule: "int10"
[ 52.187] (II) Unloading int10
[ 52.187] (EE) Screen(s) found, but none have a usable configuration.
[ 52.187] (EE)
Fatal server error:
[ 52.187] (EE) no screens found(EE)
[ 52.187] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org for help.
[ 52.187] (EE) Please also check the log file at "/var/log/Xorg.0.log"
for additional information.
[ 52.187] (EE)
[ 52.298] (EE) Server terminated with error (1). Closing log file.
|
|
|
On Sun, Jun 14, 2015 at 09:31:21AM BST, Mohammad BadieZadegan wrote:
> Hi everybody,
Hi Mohammad,
> I have installed OpenBSD on my USB flash memstick and when I inserted
> to my PC USB port its X loaded without any errors.
If you're not using USB 3.0, the performance might be quite poor but I'm
sure you already know that.
> But when I'm going to reboot my notebook (DELL E6410) by my USB memstick
> its X did not load and the file /var/log/Xorg.0.log contain these below log:
>
> ==========================================================
>
> /var/log/Xorg.0.log
>
>
> [ 50.440] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
> (Operation not permitted)
> Check that you have set 'machdep.allowaperture=1'
> in /etc/sysctl.conf and reboot your machine
> refer to xf86(4) for details
There's an advice at the top of the log file - try following it.
Since it's an Nvidia GPU, I wouldn't expect anything better than VESA.
Regards,
Raf
|
|
|
In reply to this post by Mohammad BadieZadegan
On Sun, Jun 14, 2015 at 12:01:21PM +0330, Mohammad BadieZadegan wrote:
> Hi everybody,
> I have installed OpenBSD on my USB flash memstick and when I inserted to my
> PC USB port its X loaded without any errors.
> But when I'm going to reboot my notebook (DELL E6410) by my USB memstick
> its X did not load and the file /var/log/Xorg.0.log contain these below log:
>
> ==========================================================
>
> /var/log/Xorg.0.log
>
>
> [ 50.440] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
> (Operation not permitted)
> Check that you have set 'machdep.allowaperture=1'
> in /etc/sysctl.conf and reboot your machine
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Did you check that ?
I guess that you don't have the same parameters in /etc/sysctl.conf on
your USB stick and on your machine's harddisk…
> refer to xf86(4) for details
> [ 50.440] linear framebuffer access unavailable
> [ 50.449] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility
> mode (version 3.32)
> [ 51.976]
> X.Org X Server 1.16.4
> Release Date: 2014-12-20
> [ 51.976] X Protocol Version 11, Revision 0
> [ 51.976] Build Operating System: OpenBSD 5.7 amd64
> [ 51.976] Current Operating System: OpenBSD unix_usb.my.domain 5.7
> GENERIC#825 amd64
> [ 51.976] Build Date: 07 March 2015 03:49:57AM
> [ 51.976]
> [ 51.977] Current version of pixman: 0.32.6
> [ 51.977] Before reporting problems, check http://wiki.x.org> to make sure that you have the latest version.
> [ 51.977] Markers: (--) probed, (**) from config file, (==) default
> setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [ 51.977] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jun 14
> 16:59:53 2015
> [ 51.984] (==) Using system config directory
> "/usr/X11R6/share/X11/xorg.conf.d"
> [ 51.990] (==) No Layout section. Using the first Screen section.
> [ 51.990] (==) No screen section available. Using defaults.
> [ 51.990] (**) |-->Screen "Default Screen Section" (0)
> [ 51.992] (**) | |-->Monitor "<default monitor>"
> [ 51.993] (==) No monitor specified for screen "Default Screen Section".
> Using a default monitor configuration.
> [ 51.993] (==) Disabling SIGIO handlers for input devices
> [ 51.995] (==) Automatically adding devices
> [ 51.995] (==) Automatically enabling devices
> [ 51.995] (==) Not automatically adding GPU devices
> [ 52.028] (==) FontPath set to:
> /usr/X11R6/lib/X11/fonts/misc/,
> /usr/X11R6/lib/X11/fonts/TTF/,
> /usr/X11R6/lib/X11/fonts/OTF/,
> /usr/X11R6/lib/X11/fonts/Type1/,
> /usr/X11R6/lib/X11/fonts/100dpi/,
> /usr/X11R6/lib/X11/fonts/75dpi/
> [ 52.028] (==) ModulePath set to "/usr/X11R6/lib/modules"
> [ 52.028] (II) The server relies on wscons to provide the list of input
> devices.
> If no devices become available, reconfigure wscons or disable
> AutoAddDevices.
> [ 52.029] (II) Loader magic: 0x1020c8e0b6e0
> [ 52.029] (II) Module ABI versions:
> [ 52.029] X.Org ANSI C Emulation: 0.4
> [ 52.029] X.Org Video Driver: 18.0
> [ 52.029] X.Org XInput driver : 21.0
> [ 52.029] X.Org Server Extension : 8.0
> [ 52.032] (--) PCI:*(0:1:0:0) 10de:0a6c:1028:040a rev 162, Mem @
> 0xe2000000/16777216, 0xd0000000/268435456, 0xe0000000/33554432, I/O @
> 0x00007000/128
> [ 52.033] (II) LoadModule: "glx"
> [ 52.041] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
> [ 52.160] (II) Module glx: vendor="X.Org Foundation"
> [ 52.160] compiled for 1.16.4, module version = 1.0.0
> [ 52.160] ABI class: X.Org Server Extension, version 8.0
> [ 52.160] (==) AIGLX enabled
> [ 52.160] (==) Matched nv as autoconfigured driver 0
> [ 52.160] (==) Matched vesa as autoconfigured driver 1
> [ 52.160] (==) Assigned the driver to the xf86ConfigLayout
> [ 52.160] (II) LoadModule: "nv"
> [ 52.160] (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.so
> [ 52.169] (II) Module nv: vendor="X.Org Foundation"
> [ 52.169] compiled for 1.16.4, module version = 2.1.20
> [ 52.169] Module class: X.Org Video Driver
> [ 52.169] ABI class: X.Org Video Driver, version 18.0
> [ 52.169] (II) LoadModule: "vesa"
> [ 52.169] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
> [ 52.172] (II) Module vesa: vendor="X.Org Foundation"
> [ 52.172] compiled for 1.16.4, module version = 2.3.3
> [ 52.172] Module class: X.Org Video Driver
> [ 52.172] ABI class: X.Org Video Driver, version 18.0
> [ 52.172] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA
> TNT2,
> Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
> Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
> GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
> GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
> Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
> GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
> GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
> GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
> GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
> GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
> GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
> Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
> GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
> GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
> GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
> Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
> GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
> Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
> GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
> GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
> GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
> GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
> GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
> GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
> Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
> GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
> GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
> GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
> GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
> GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
> Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
> GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
> GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
> GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
> GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
> Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
> GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
> GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
> GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
> Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
> GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
> GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
> GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
> GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
> GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
> GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
> GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
> GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
> GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
> Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
> GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
> GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
> GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
> GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
> GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
> GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
> GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
> Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
> GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
> Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
> GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
> GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
> GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
> GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
> GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
> Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
> GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
> GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
> GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
> Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
> GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
> GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
> GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
> Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
> Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
> GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
> Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
> Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
> GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
> GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
> GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
> GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
> GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
> GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
> GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
> Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
> Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
> GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
> GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
> GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
> GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
> GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
> GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
> GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
> GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
> GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
> Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
> Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
> GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
> GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
> Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
> Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
> Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
> GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
> nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
> GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
> GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
> GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
> GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
> GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
> ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
> GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
> GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
> GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
> GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
> NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
> GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
> Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
> GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
> GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
> GeForce GTS 360M, Quadro FX 1800M
> [ 52.173] (II) VESA: driver for VESA chipsets: vesa
> [ 52.173] (--) NV: Found NVIDIA NVS 3100M at 01@00:00:0
> [ 52.175] (WW) Falling back to old probe method for vesa
> [ 52.175] (II) Loading sub module "int10"
> [ 52.175] (II) LoadModule: "int10"
> [ 52.178] (II) Loading /usr/X11R6/lib/modules/libint10.so
> [ 52.187] (II) Module int10: vendor="X.Org Foundation"
> [ 52.187] compiled for 1.16.4, module version = 1.0.0
> [ 52.187] ABI class: X.Org Video Driver, version 18.0
> [ 52.187] (II) NV(0): Initializing int10
> [ 52.187] (EE) NV(0): Cannot read int vect
> [ 52.187] (WW) NV(0): Failed to initialize the int10 module; the console
> will not be restored.
> [ 52.187] (II) NV(0): Creating default Display subsection in Screen
> section
> "Default Screen Section" for depth/fbbpp 24/32
> [ 52.187] (==) NV(0): Depth 24, (--) framebuffer bpp 32
> [ 52.187] (==) NV(0): RGB weight 888
> [ 52.187] (==) NV(0): Default visual is TrueColor
> [ 52.187] (==) NV(0): Using hardware cursor
> [ 52.187] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
> [ 52.187] (EE) NV(0): Failed to map MMIO registers: Bad file descriptor
> [ 52.187] (II) UnloadModule: "nv"
> [ 52.187] (II) UnloadSubModule: "int10"
> [ 52.187] (II) Unloading int10
> [ 52.187] (EE) Screen(s) found, but none have a usable configuration.
> [ 52.187] (EE)
> Fatal server error:
> [ 52.187] (EE) no screens found(EE)
> [ 52.187] (EE)
> Please consult the The X.Org Foundation support
> at http://wiki.x.org> for help.
> [ 52.187] (EE) Please also check the log file at "/var/log/Xorg.0.log"
> for additional information.
> [ 52.187] (EE)
> [ 52.298] (EE) Server terminated with error (1). Closing log file.
--
Matthieu Herrb
|
|
|
I set 'machdep.allowaperture=1'
> in /etc/sysctl.conf and reboot my notebook but my display goes to blank
screen!
Then, I can only power down by holdin power key!
How can I resolve this?
On Sun, Jun 14, 2015 at 12:24 PM, Raf Czlonka < [hidden email]> wrote:
> On Sun, Jun 14, 2015 at 09:31:21AM BST, Mohammad BadieZadegan wrote:
>
> > Hi everybody,
>
> Hi Mohammad,
>
> > I have installed OpenBSD on my USB flash memstick and when I inserted
> > to my PC USB port its X loaded without any errors.
>
> If you're not using USB 3.0, the performance might be quite poor but I'm
> sure you already know that.
>
> > But when I'm going to reboot my notebook (DELL E6410) by my USB memstick
> > its X did not load and the file /var/log/Xorg.0.log contain these below
> log:
> >
> > ==========================================================
> >
> > /var/log/Xorg.0.log
> >
> >
> > [ 50.440] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
> > (Operation not permitted)
> > Check that you have set 'machdep.allowaperture=1'
> > in /etc/sysctl.conf and reboot your machine
> > refer to xf86(4) for details
>
> There's an advice at the top of the log file - try following it.
>
> Since it's an Nvidia GPU, I wouldn't expect anything better than VESA.
>
> Regards,
>
> Raf
>
>
--
[image: See you on my WEB] < http://933k.ir>
|
|
|
I changed machdep.allowaperture to 2 after 1 and my blank screen did not
seen.
BTW, I connect other monitor to my notebook VGA port and see that the XDM
was loaded truely!
But now how can I get the XDM login screen on my notebook LCD (Not on VGA
port)?
On Sun, Jun 14, 2015 at 12:54 PM, Mohammad BadieZadegan < [hidden email]
> wrote:
> I set 'machdep.allowaperture=1'
> > in /etc/sysctl.conf and reboot my notebook but my display goes to blank
> screen!
> Then, I can only power down by holdin power key!
> How can I resolve this?
>
> On Sun, Jun 14, 2015 at 12:24 PM, Raf Czlonka < [hidden email]> wrote:
>
>> On Sun, Jun 14, 2015 at 09:31:21AM BST, Mohammad BadieZadegan wrote:
>>
>> > Hi everybody,
>>
>> Hi Mohammad,
>>
>> > I have installed OpenBSD on my USB flash memstick and when I inserted
>> > to my PC USB port its X loaded without any errors.
>>
>> If you're not using USB 3.0, the performance might be quite poor but I'm
>> sure you already know that.
>>
>> > But when I'm going to reboot my notebook (DELL E6410) by my USB memstick
>> > its X did not load and the file /var/log/Xorg.0.log contain these below
>> log:
>> >
>> > ==========================================================
>> >
>> > /var/log/Xorg.0.log
>> >
>> >
>> > [ 50.440] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
>> > (Operation not permitted)
>> > Check that you have set 'machdep.allowaperture=1'
>> > in /etc/sysctl.conf and reboot your machine
>> > refer to xf86(4) for details
>>
>> There's an advice at the top of the log file - try following it.
>>
>> Since it's an Nvidia GPU, I wouldn't expect anything better than VESA.
>>
>> Regards,
>>
>> Raf
>>
>>
--
[image: See you on my WEB] < http://933k.ir>
|
|
|
In reply to this post by Mohammad BadieZadegan
I configured xorg.conf.new and then copy it to /etc/X11/xorg.conf.
(With 2 new insert, *DefaultDepth 24 *and *Modes "1280x1024"*)
But still :
*(EE) NV(0): No valid initial configuration found*
How Resolve that?
On Sun, Jun 14, 2015 at 12:54 PM, Mohammad BadieZadegan < [hidden email]
> wrote:
> I set 'machdep.allowaperture=1'
> > in /etc/sysctl.conf and reboot my notebook but my display goes to blank
> screen!
> Then, I can only power down by holdin power key!
> How can I resolve this?
>
> On Sun, Jun 14, 2015 at 12:24 PM, Raf Czlonka < [hidden email]> wrote:
>
>> On Sun, Jun 14, 2015 at 09:31:21AM BST, Mohammad BadieZadegan wrote:
>>
>> > Hi everybody,
>>
>> Hi Mohammad,
>>
>> > I have installed OpenBSD on my USB flash memstick and when I inserted
>> > to my PC USB port its X loaded without any errors.
>>
>> If you're not using USB 3.0, the performance might be quite poor but I'm
>> sure you already know that.
>>
>> > But when I'm going to reboot my notebook (DELL E6410) by my USB memstick
>> > its X did not load and the file /var/log/Xorg.0.log contain these below
>> log:
>> >
>> > ==========================================================
>> >
>> > /var/log/Xorg.0.log
>> >
>> >
>> > [ 50.440] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
>> > (Operation not permitted)
>> > Check that you have set 'machdep.allowaperture=1'
>> > in /etc/sysctl.conf and reboot your machine
>> > refer to xf86(4) for details
>>
>> There's an advice at the top of the log file - try following it.
>>
>> Since it's an Nvidia GPU, I wouldn't expect anything better than VESA.
>>
>> Regards,
>>
>> Raf
>>
>>
--
[image: See you on my WEB] < http://933k.ir>
|
|
|
On Sun, Jun 14, 2015 at 12:48:10PM BST, Mohammad BadieZadegan wrote:
> I configured xorg.conf.new and then copy it to /etc/X11/xorg.conf.
> (With 2 new insert, *DefaultDepth 24 *and *Modes "1280x1024"*)
> But still :
> *(EE) NV(0): No valid initial configuration found*
> How Resolve that?
>
> On Sun, Jun 14, 2015 at 12:54 PM, Mohammad BadieZadegan < [hidden email]
> > wrote:
>
> > I set 'machdep.allowaperture=1'
> > > in /etc/sysctl.conf and reboot my notebook but my display goes to blank
> > screen!
> > Then, I can only power down by holdin power key!
> > How can I resolve this?
1. Disable xdm and use xinit or startx.
2. Unplug the external monitor.
3. Delete the xorg.conf file - like I've mentioned before, you'll
probably won't get anything beyond VESA/SVGA (800x600).
4. machdep.allowaperture has four possible settings - 0-3. Have you
tried them all?
5. Send your dmesg, please.
Raf
|
|
|
Well,
I'm sorry to start working with OpenBSD and I'm newbe.
> 1. Disable xdm and use xinit or startx.
>
How can disabling xdm and replace startx?
> probably won't get anything beyond VESA/SVGA (800x600).
>
OK, I found the resolation parameter at xorg.conf BUT How can I set the
VESA?SVGA
|
|
|
On Mon, Jun 15, 2015 at 06:34:00AM BST, Mohammad BadieZadegan wrote:
> Well,
> I'm sorry to start working with OpenBSD and I'm newbe.
That's OK - we have all been newbies once.
> > 1. Disable xdm and use xinit or startx.
> >
> How can disabling xdm and replace startx?
>
> > probably won't get anything beyond VESA/SVGA (800x600).
> >
> OK, I found the resolation parameter at xorg.conf BUT How can I set the
> VESA?SVGA
I'm afraid this is where I have to draw the line - I'm more than happy
to help with "real" issues, but I'm not willing to provide free support.
Please do your homework first[0] and learn the basics!
This is not meant as a discouragement - quite the opposite. I'm doing
you a favour - trust me :^)
OpenBSD has one of the best I've seen, and up-to-date,
documentation[1][2] out there! Use it!
[0] http://www.catb.org/~esr/faqs/smart-questions.html#before[1] http://www.openbsd.org/faq/[2] http://www.openbsd.org/cgi-bin/man.cgiRegards,
Raf
|
|
|
Yes, Ofcourse reading FAQ pages will resolve most of Issues But I tried
more than ten times to review X11 FAQ pages and it was not clearly step by
step installing guidence.
Why OpenBSD did not collect these FAQ pages into one PDF under OpenBSD
Handbook(such as http://www.openbsd.org/faq/obsd-faq.txt) with release date?
Regards.
On Mon, Jun 15, 2015 at 1:00 PM, Raf Czlonka < [hidden email]> wrote:
> On Mon, Jun 15, 2015 at 06:34:00AM BST, Mohammad BadieZadegan wrote:
>
> > Well,
> > I'm sorry to start working with OpenBSD and I'm newbe.
>
> That's OK - we have all been newbies once.
>
> > > 1. Disable xdm and use xinit or startx.
> > >
> > How can disabling xdm and replace startx?
> >
> > > probably won't get anything beyond VESA/SVGA (800x600).
> > >
> > OK, I found the resolation parameter at xorg.conf BUT How can I set the
> > VESA?SVGA
>
> I'm afraid this is where I have to draw the line - I'm more than happy
> to help with "real" issues, but I'm not willing to provide free support.
>
> Please do your homework first[0] and learn the basics!
> This is not meant as a discouragement - quite the opposite. I'm doing
> you a favour - trust me :^)
>
> OpenBSD has one of the best I've seen, and up-to-date,
> documentation[1][2] out there! Use it!
>
> [0] http://www.catb.org/~esr/faqs/smart-questions.html#before> [1] http://www.openbsd.org/faq/> [2] http://www.openbsd.org/cgi-bin/man.cgi>
> Regards,
>
> Raf
>
>
--
[image: See you on my WEB] < http://933k.ir>
|
|
|
Hi again,
I have re-installed OpenBSD without xdm installing at first installing boot.
Then I downloaded "
http://firmware.openbsd.org/firmware/5.7/radeondrm-firmware-20131002p0.tgz"
and extracted it to /etc/firmware.
Then run fw_update -a and I saw my new firmwares have installed correctly.
At now I installed vifm and see that vifm mesasge me:
"Vifm requires a console that can support color." and exit!
BTW: I have not resolved the last issue about X and maybe this new issue
relay to my last Xorg issue.
How can I (at least) install the vifm and then Xorg?
Can any one installing OpenBSD on the notebook?!
On Mon, Jun 15, 2015 at 2:43 PM, Mohammad BadieZadegan < [hidden email]>
wrote:
> Yes, Ofcourse reading FAQ pages will resolve most of Issues But I tried
> more than ten times to review X11 FAQ pages and it was not clearly step by
> step installing guidence.
> Why OpenBSD did not collect these FAQ pages into one PDF under OpenBSD
> Handbook(such as http://www.openbsd.org/faq/obsd-faq.txt) with release
> date?
> Regards.
>
>
> On Mon, Jun 15, 2015 at 1:00 PM, Raf Czlonka < [hidden email]> wrote:
>
>> On Mon, Jun 15, 2015 at 06:34:00AM BST, Mohammad BadieZadegan wrote:
>>
>> > Well,
>> > I'm sorry to start working with OpenBSD and I'm newbe.
>>
>> That's OK - we have all been newbies once.
>>
>> > > 1. Disable xdm and use xinit or startx.
>> > >
>> > How can disabling xdm and replace startx?
>> >
>> > > probably won't get anything beyond VESA/SVGA (800x600).
>> > >
>> > OK, I found the resolation parameter at xorg.conf BUT How can I set the
>> > VESA?SVGA
>>
>> I'm afraid this is where I have to draw the line - I'm more than happy
>> to help with "real" issues, but I'm not willing to provide free support.
>>
>> Please do your homework first[0] and learn the basics!
>> This is not meant as a discouragement - quite the opposite. I'm doing
>> you a favour - trust me :^)
>>
>> OpenBSD has one of the best I've seen, and up-to-date,
>> documentation[1][2] out there! Use it!
>>
>> [0] http://www.catb.org/~esr/faqs/smart-questions.html#before>> [1] http://www.openbsd.org/faq/>> [2] http://www.openbsd.org/cgi-bin/man.cgi>>
>> Regards,
>>
>> Raf
>>
>>
> --
[image: See you on my WEB] < http://933k.ir>
|
|
|
On 06/17/15 08:27, Mohammad BadieZadegan wrote:
> Hi again,
> I have re-installed OpenBSD without xdm installing at first installing boot.
> Then I downloaded "
> http://firmware.openbsd.org/firmware/5.7/radeondrm-firmware-20131002p0.tgz"
> and extracted it to /etc/firmware.
> Then run fw_update -a and I saw my new firmwares have installed correctly.
> At now I installed vifm and see that vifm mesasge me:
> "Vifm requires a console that can support color." and exit!
> BTW: I have not resolved the last issue about X and maybe this new issue
> relay to my last Xorg issue.
> How can I (at least) install the vifm and then Xorg?
> Can any one installing OpenBSD on the notebook?!
So what happens when you type startx?
Where is your dmesg?
These questions should be on misc@
Cheers
Fred
|
|
|
This is my first EE at Xorg.0.log:
[ 12287.170] (EE) NV(0): No valid initial configuration found
[ 12287.170] (II) UnloadModule: "nv"
[ 12287.170] (II) UnloadSubModule: "int10"
[ 12287.170] (II) Unloading int10
[ 12287.170] (EE) Screen(s) found, but none have a usable configuration.
[ 12287.170] (EE)
Fatal server error:
[ 12287.170] (EE) no screens found(EE)
Where can I find the initial configuration steps at FAQ page (1-15)?
On Wed, Jun 17, 2015 at 2:00 PM, Fred < [hidden email]> wrote:
> On 06/17/15 08:27, Mohammad BadieZadegan wrote:
>
>> Hi again,
>> I have re-installed OpenBSD without xdm installing at first installing
>> boot.
>> Then I downloaded "
>> http://firmware.openbsd.org/firmware/5.7/radeondrm-firmware-20131002p0.tgz>> "
>> and extracted it to /etc/firmware.
>> Then run fw_update -a and I saw my new firmwares have installed correctly.
>> At now I installed vifm and see that vifm mesasge me:
>> "Vifm requires a console that can support color." and exit!
>> BTW: I have not resolved the last issue about X and maybe this new issue
>> relay to my last Xorg issue.
>> How can I (at least) install the vifm and then Xorg?
>> Can any one installing OpenBSD on the notebook?!
>>
>
> So what happens when you type startx?
>
> Where is your dmesg?
>
> These questions should be on misc@
>
> Cheers
>
> Fred
>
--
[image: See you on my WEB] < http://933k.ir>
|
|
|
On 06/18/15 08:58, Mohammad BadieZadegan wrote:
> This is my first EE at Xorg.0.log:
>
> [ 12287.170] (EE) NV(0): No valid initial configuration found
> [ 12287.170] (II) UnloadModule: "nv"
> [ 12287.170] (II) UnloadSubModule: "int10"
> [ 12287.170] (II) Unloading int10
> [ 12287.170] (EE) Screen(s) found, but none have a usable configuration.
> [ 12287.170] (EE)
> Fatal server error:
> [ 12287.170] (EE) no screens found(EE)
>
> Where can I find the initial configuration steps at FAQ page (1-15)?
>
>
dmesg would tell us what video device you have in your machine.
There is not enough information here to help you to solve your problem.
man 4 nv might help you.
Fred
|
|
|
OpenBSD 5.7 (GENERIC.MP) #881: Sun Mar 8 11:04:17 MDT 2015
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 30<config_unit,memory_size>
real mem = 4200984576 (4006MB)
avail mem = 4085235712 (3895MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf2440 (67 entries)
bios0: vendor Dell Inc. version "A06" date 11/20/2010
bios0: Dell Inc. Latitude E6410
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SLIC SSDT
acpi0: wakeup devices AGP_(S4) P0P1(S4) DIGC(S3) UAR1(S3) HDEF(S4) PXSX(S4)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
RP05(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz, 3059.59 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz, 3058.97 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 2, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz, 3058.97 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz, 3058.97 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 2, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 12 (P0P1)
acpiprt3 at acpi0: bus 2 (RP01)
acpiprt4 at acpi0: bus 3 (RP02)
acpiprt5 at acpi0: bus 4 (RP03)
acpiprt6 at acpi0: bus 6 (RP04)
acpiprt7 at acpi0: bus -1 (RP05)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG3)
acpiprt11 at acpi0: bus -1 (PEG5)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpicpu2 at acpi0: C3, C1, PSS
acpicpu3 at acpi0: C3, C1, PSS
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpivideo0 at acpi0: VID_
acpivout0 at acpivideo0: LCD_
acpivideo1 at acpi0: VID_
acpivout1 at acpivideo1: LCD_
cpu0: Enhanced SpeedStep 3059 MHz: speeds: 2667, 2666, 2533, 2399, 2266,
2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 3400 PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0a6c rev
0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci1 dev 0 function 1 vendor "NVIDIA", unknown product 0x0be3
rev 0xa1: msi
azalia0: no supported codecs
em0 at pci0 dev 25 function 0 "Intel 82577LM" rev 0x05: msi, address
5c:26:0a:40:0d:d0
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia1 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: msi
azalia1: codecs: IDT 92HD81B1C
audio0 at azalia1
ppb1 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x05: msi
pci3 at ppb2 bus 3
"Broadcom BCM43224" rev 0x01 at pci3 dev 0 function 0 not configured
ppb3 at pci0 dev 28 function 2 "Intel 3400 PCIE" rev 0x05: msi
pci4 at ppb3 bus 4
cbb0 at pci4 dev 0 function 0 vendor "Ricoh", unknown product 0xe476 rev
0x02: apic 2 int 18
sdhc0 at pci4 dev 0 function 1 "Ricoh 5U822 SD/MMC" rev 0x03: apic 2 int 19
sdmmc0 at sdhc0
"Ricoh 5U832 Firewire" rev 0x03 at pci4 dev 0 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 5 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
ppb4 at pci0 dev 28 function 3 "Intel 3400 PCIE" rev 0x05: msi
pci5 at ppb4 bus 6
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 17
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5
pci6 at ppb5 bus 12
pcib0 at pci0 dev 31 function 0 "Intel QM57 LPC" rev 0x05
ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI 1.3
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MQ01ABD0, AX00> SCSI3 0/direct
fixed naa.5000039575784210
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVD-ROM DU30N, A100> ATAPI 5/cdrom
removable
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 2 int 18
iic0 at ichiic0
sdtemp0 at iic0 addr 0x18: mcp98243
sdtemp1 at iic0 addr 0x1a: mcp98243
lisa0 at iic0 addr 0x1d: lis331dl
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM with thermal
sensor
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 SO-DIMM with thermal
sensor
itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x05
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
pci7 at mainbus0 bus 63
pchb1 at pci7 dev 0 function 0 "Intel QuickPath" rev 0x02
pchb2 at pci7 dev 0 function 1 "Intel QuickPath" rev 0x02
pchb3 at pci7 dev 2 function 0 "Intel QPI Link" rev 0x02
pchb4 at pci7 dev 2 function 1 "Intel QPI Physical" rev 0x02
pchb5 at pci7 dev 2 function 2 "Intel Reserved" rev 0x02
pchb6 at pci7 dev 2 function 3 "Intel Reserved" rev 0x02
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uvideo0 at uhub2 port 4 configuration 1 interface 0 "CN06YWTK7248711G044C
Laptop_Integrated_Webcam_3M" rev 2.00/3.31 addr 3
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub3 port 4 configuration 1 interface 0 "SanDisk Cruzer Fit" rev
2.00/1.27 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SanDisk, Cruzer Fit, 1.27> SCSI4 0/direct
removable serial.07815571240124105543
sd1: 14907MB, 512 bytes/sector, 30529536 sectors
ugen0 at uhub3 port 8 "Broadcom Corp 5880" rev 1.10/1.01 addr 4
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd1a (23739fc71b57a060.a) swap on sd1b dump on sd1b
On Thu, Jun 18, 2015 at 11:56 AM, Fred < [hidden email]> wrote:
> On 06/18/15 08:58, Mohammad BadieZadegan wrote:
>
>> This is my first EE at Xorg.0.log:
>>
>> [ 12287.170] (EE) NV(0): No valid initial configuration found
>> [ 12287.170] (II) UnloadModule: "nv"
>> [ 12287.170] (II) UnloadSubModule: "int10"
>> [ 12287.170] (II) Unloading int10
>> [ 12287.170] (EE) Screen(s) found, but none have a usable configuration.
>> [ 12287.170] (EE)
>> Fatal server error:
>> [ 12287.170] (EE) no screens found(EE)
>>
>> Where can I find the initial configuration steps at FAQ page (1-15)?
>>
>>
>>
> dmesg would tell us what video device you have in your machine.
>
> There is not enough information here to help you to solve your problem.
>
> man 4 nv might help you.
>
> Fred
>
>
--
[image: See you on my WEB] < http://933k.ir>
|
|
|
On 06/18/15 09:29, Mohammad BadieZadegan wrote:
<snipped>
> vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0a6c rev
> 0xa2
</snipped>
This is your problem the device does not get recognised - their is no
entry for 0x0a6c in pcidevs.h so the system does not know which driver
to use to get your device to work.
|
|
|
Ohh, Well, At now I replace nv by vesa on /etc/X11/xorg.cong and it
resolved by vesa driver...
On Thu, Jun 18, 2015 at 12:38 PM, Mohammad BadieZadegan < [hidden email]
> wrote:
> Ok, Thanks alot, Is that a way to recognize it by OpenBSD or there is no
> way?
>
> On Thu, Jun 18, 2015 at 12:21 PM, Fred < [hidden email]> wrote:
>
>> On 06/18/15 09:29, Mohammad BadieZadegan wrote:
>> <snipped>
>>
>>> vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0a6c rev
>>> 0xa2
>>>
>> </snipped>
>>
>> This is your problem the device does not get recognised - their is no
>> entry for 0x0a6c in pcidevs.h so the system does not know which driver to
>> use to get your device to work.
>>
>>
>>
>>
>>
>
>
> --
> [image: See you on my WEB] < http://933k.ir>
>
--
[image: See you on my WEB] < http://933k.ir>
|
|
Locked
