No OpenBSD for Lenovo Thinkpad w500 4058CTO

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

No OpenBSD for Lenovo Thinkpad w500 4058CTO

Bill Maas-2
Hi,

First, and just for the record: while trying to set up an FTP server on
OpenBSD 4.2 I got this error message while trying to connect by any
other address than 'localhost':

421 Service not available, remote server has closed connection.

Reason, it turned out: a missing entry in /etc/hosts.allow. I had a hard
time finding anything relevant out there, so now at least the relation
between the error message and the missing entry is documented.


The reason I needed an FTP server is that I'm trying to install OpenBSD
4.5 on a Lenovo Thinkpad W500 model 4058-CTO, with no success. With obsd
4.4 it never got past hardware initialization, with 4.5 at least I get
the installer menu, but no for long:

[...]
Proceed with install? [n] y
[...]

No disks found
#

And no, I don't expect developers to _scramble to their laptops_ just
because I as an OpenBSD user am _entitled to have this fixed ASAP_ and
stuff like that. I was at least happy to see that the Fathers of OpenBSD
in their infinite wisdom decided to use plain ftp for downloading
packages, and not some custom-built single-purpose
binary-installer-builtin, so I could at least get a dmesg off the box (I
didn't manage to get a screen capture over USB).

The output from the 'dmesg' command run from the shell commandline is
listed below. I'm only an "index" list member, but feel free to contact
me offlist if you need more info. I'll be happy to help testing any
updates. And I'll be following any replies through the archives of
course.

An otherwise very happy OpenBSD user,


Bill


dmesg:
--------------------------------------------------------------------------
OpenBSD 4.5 (RAMDISK_CD) #1112: Sat Feb 28 15:06:26 MST 2009
    [hidden email]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel"
686-class) 2.53 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem  = 3214176256 (3065MB)
avail mem = 3115958272 (2971MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/24/08, BIOS32 rev. 0 @ 0xfdc80,
SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
bios0: vendor LENOVO version "6FET46WW (1.16 )" date 09/24/2008
bios0: LENOVO 4058CTO
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT
SSDT SSDT SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 265MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x1000 0xd1000/0x1000
0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16
(irq 11)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility Radeon HD 3650" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1
int 20 (irq 11), address 00:1c:25:97:34:61
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
20 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
21 (irq 11)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
22 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not
configured
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int
20 (irq 11)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int
21 (irq 11)
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300AGN" rev 0x00: apic 1
int 17 (irq 11), MIMO 3T3R, MoW, address 00:16:ea:a3:00:2c
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int
23 (irq 11)
pci4 at ppb3 bus 5
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int
20 (irq 11)
pci5 at ppb4 bus 13
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
16 (irq 11)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
17 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
19 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 21
cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int
16 (irq 11)
"Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 0 function 1 not configured
"Ricoh 5C822 SD/MMC" rev 0x21 at pci6 dev 0 function 2 not configured
"Ricoh 5C843 MMC" rev 0x11 at pci6 dev 0 function 3 not configured
"Ricoh 5C592 Memory Stick" rev 0x11 at pci6 dev 0 function 4 not
configured
"Ricoh 5C852 xD" rev 0x11 at pci6 dev 0 function 5 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 1 int 16 (irq 255) for native-PCI interrupt
pciide0: couldn't map channel 0 cmd regs
pciide0: couldn't map channel 1 cmd regs
"Intel 82801I SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3800 blocks
"Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2 at
uhub0 port 6 not configured
"Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev
2.00/3.52 addr 2 at uhub3 port 2 not configured
"Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 2 at uhub7 port
2 not configured
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
--------------------------------------------------------------------------

Reply | Threaded
Open this post in threaded view
|

Re: No OpenBSD for Lenovo Thinkpad w500 4058CTO

Jan Stary
Your message confuses me:

> The reason I needed an FTP server is that I'm trying to install OpenBSD
> 4.5 on a Lenovo Thinkpad W500 model 4058-CTO, with no success.

Why would you need to run your own FTP server just to install OpenBSD?

> With obsd
> 4.4 it never got past hardware initialization, with 4.5 at least I get
> the installer menu, but no for long:
>
> [...]
> Proceed with install? [n] y
> [...]
>
> No disks found
> #
>
> And no, I don't expect developers to _scramble to their laptops_ just
> because I as an OpenBSD user am _entitled to have this fixed ASAP_ and
> stuff like that. I was at least happy to see that the Fathers of OpenBSD
> in their infinite wisdom decided to use plain ftp for downloading
> packages, and not some custom-built single-purpose
> binary-installer-builtin, so I could at least get a dmesg off the box (I
> didn't manage to get a screen capture over USB).

What does downloading packages have to do with getting a dmesg?
Am I right at guessing that you used the ftp command of the
semi-installed system to upload the dmesg output to some
other machine?

> OpenBSD 4.5 (RAMDISK_CD) #1112: Sat Feb 28 15:06:26 MST 2009

Is this really 4.5, as released on May 1st?

>     [hidden email]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel"
> 686-class) 2.53 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> real mem  = 3214176256 (3065MB)
> avail mem = 3115958272 (2971MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 09/24/08, BIOS32 rev. 0 @ 0xfdc80,
> SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
> bios0: vendor LENOVO version "6FET46WW (1.16 )" date 09/24/2008
> bios0: LENOVO 4058CTO
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT
> SSDT SSDT SSDT SSDT
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 265MHz
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus -1 (EXP2)
> acpiprt5 at acpi0: bus 5 (EXP3)
> acpiprt6 at acpi0: bus 13 (EXP4)
> acpiprt7 at acpi0: bus 21 (PCI1)
> bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x1000 0xd1000/0x1000
> 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16
> (irq 11)
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Mobility Radeon HD 3650" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1
> int 20 (irq 11), address 00:1c:25:97:34:61
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
> 20 (irq 11)
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
> 21 (irq 11)
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
> 22 (irq 11)
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
> 23 (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> "Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not
> configured
> ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int
> 20 (irq 11)
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int
> 21 (irq 11)
> pci3 at ppb2 bus 3
> iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300AGN" rev 0x00: apic 1
> int 17 (irq 11), MIMO 3T3R, MoW, address 00:16:ea:a3:00:2c
> ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int
> 23 (irq 11)
> pci4 at ppb3 bus 5
> ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int
> 20 (irq 11)
> pci5 at ppb4 bus 13
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
> 16 (irq 11)
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
> 17 (irq 11)
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
> 18 (irq 11)
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
> 19 (irq 11)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci6 at ppb5 bus 21
> cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int
> 16 (irq 11)
> "Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 0 function 1 not configured
> "Ricoh 5C822 SD/MMC" rev 0x21 at pci6 dev 0 function 2 not configured
> "Ricoh 5C843 MMC" rev 0x11 at pci6 dev 0 function 3 not configured
> "Ricoh 5C592 Memory Stick" rev 0x11 at pci6 dev 0 function 4 not
> configured
> "Ricoh 5C852 xD" rev 0x11 at pci6 dev 0 function 5 not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 1 int 16 (irq 255) for native-PCI interrupt
> pciide0: couldn't map channel 0 cmd regs
> pciide0: couldn't map channel 1 cmd regs
> "Intel 82801I SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> rd0: fixed, 3800 blocks
> "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2 at
> uhub0 port 6 not configured
> "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev
> 2.00/3.52 addr 2 at uhub3 port 2 not configured
> "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 2 at uhub7 port
> 2 not configured
> softraid0 at root
> root on rd0a swap on rd0b dump on rd0b
> --------------------------------------------------------------------------

Reply | Threaded
Open this post in threaded view
|

Re: No OpenBSD for Lenovo Thinkpad w500 4058CTO

Nick Guenther
In reply to this post by Bill Maas-2
Your disks aren't showing up in dmesg. Try tweaking your BIOS
settings--i know that I had to change from IDE emulation to AHCI when
I upgraded to 4.5.

On 05/05/2009, Bill Maas <[hidden email]> wrote:

> Hi,
>
> First, and just for the record: while trying to set up an FTP server on
> OpenBSD 4.2 I got this error message while trying to connect by any
> other address than 'localhost':
>
> 421 Service not available, remote server has closed connection.
>
> Reason, it turned out: a missing entry in /etc/hosts.allow. I had a hard
> time finding anything relevant out there, so now at least the relation
> between the error message and the missing entry is documented.
>
>
> The reason I needed an FTP server is that I'm trying to install OpenBSD
> 4.5 on a Lenovo Thinkpad W500 model 4058-CTO, with no success. With obsd
> 4.4 it never got past hardware initialization, with 4.5 at least I get
> the installer menu, but no for long:
>
> [...]
> Proceed with install? [n] y
> [...]
>
> No disks found
> #
>
> And no, I don't expect developers to _scramble to their laptops_ just
> because I as an OpenBSD user am _entitled to have this fixed ASAP_ and
> stuff like that. I was at least happy to see that the Fathers of OpenBSD
> in their infinite wisdom decided to use plain ftp for downloading
> packages, and not some custom-built single-purpose
> binary-installer-builtin, so I could at least get a dmesg off the box (I
> didn't manage to get a screen capture over USB).
>
> The output from the 'dmesg' command run from the shell commandline is
> listed below. I'm only an "index" list member, but feel free to contact
> me offlist if you need more info. I'll be happy to help testing any
> updates. And I'll be following any replies through the archives of
> course.
>
> An otherwise very happy OpenBSD user,
>
>
> Bill
>
>
> dmesg:
> --------------------------------------------------------------------------
> OpenBSD 4.5 (RAMDISK_CD) #1112: Sat Feb 28 15:06:26 MST 2009
>     [hidden email]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel"
> 686-class) 2.53 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> real mem  = 3214176256 (3065MB)
> avail mem = 3115958272 (2971MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 09/24/08, BIOS32 rev. 0 @ 0xfdc80,
> SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
> bios0: vendor LENOVO version "6FET46WW (1.16 )" date 09/24/2008
> bios0: LENOVO 4058CTO
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT
> SSDT SSDT SSDT SSDT
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 265MHz
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus -1 (EXP2)
> acpiprt5 at acpi0: bus 5 (EXP3)
> acpiprt6 at acpi0: bus 13 (EXP4)
> acpiprt7 at acpi0: bus 21 (PCI1)
> bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x1000 0xd1000/0x1000
> 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16
> (irq 11)
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Mobility Radeon HD 3650" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1
> int 20 (irq 11), address 00:1c:25:97:34:61
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
> 20 (irq 11)
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
> 21 (irq 11)
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
> 22 (irq 11)
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
> 23 (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> "Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not
> configured
> ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int
> 20 (irq 11)
> pci2 at ppb1 bus 2
> ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int
> 21 (irq 11)
> pci3 at ppb2 bus 3
> iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300AGN" rev 0x00: apic 1
> int 17 (irq 11), MIMO 3T3R, MoW, address 00:16:ea:a3:00:2c
> ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int
> 23 (irq 11)
> pci4 at ppb3 bus 5
> ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int
> 20 (irq 11)
> pci5 at ppb4 bus 13
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
> 16 (irq 11)
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
> 17 (irq 11)
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
> 18 (irq 11)
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
> 19 (irq 11)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci6 at ppb5 bus 21
> cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int
> 16 (irq 11)
> "Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 0 function 1 not configured
> "Ricoh 5C822 SD/MMC" rev 0x21 at pci6 dev 0 function 2 not configured
> "Ricoh 5C843 MMC" rev 0x11 at pci6 dev 0 function 3 not configured
> "Ricoh 5C592 Memory Stick" rev 0x11 at pci6 dev 0 function 4 not
> configured
> "Ricoh 5C852 xD" rev 0x11 at pci6 dev 0 function 5 not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA,
> channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 1 int 16 (irq 255) for native-PCI interrupt
> pciide0: couldn't map channel 0 cmd regs
> pciide0: couldn't map channel 1 cmd regs
> "Intel 82801I SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> rd0: fixed, 3800 blocks
> "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2 at
> uhub0 port 6 not configured
> "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev
> 2.00/3.52 addr 2 at uhub3 port 2 not configured
> "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 2 at uhub7 port
> 2 not configured
> softraid0 at root
> root on rd0a swap on rd0b dump on rd0b
> --------------------------------------------------------------------------

Reply | Threaded
Open this post in threaded view
|

Re: No OpenBSD for Lenovo Thinkpad w500 4058CTO

Tomas Bodzar-4
This is correct solution for this laptop.One of my friends has same
type and switching setup in BIOS help to see disks and then install
OpenBSD 4.4 and 4.5

2009/5/5 Nick Guenther <[hidden email]>:

> Your disks aren't showing up in dmesg. Try tweaking your BIOS
> settings--i know that I had to change from IDE emulation to AHCI when
> I upgraded to 4.5.
>
> On 05/05/2009, Bill Maas <[hidden email]> wrote:
>> Hi,
>>
>> First, and just for the record: while trying to set up an FTP server on
>> OpenBSD 4.2 I got this error message while trying to connect by any
>> other address than 'localhost':
>>
>> 421 Service not available, remote server has closed connection.
>>
>> Reason, it turned out: a missing entry in /etc/hosts.allow. I had a hard
>> time finding anything relevant out there, so now at least the relation
>> between the error message and the missing entry is documented.
>>
>>
>> The reason I needed an FTP server is that I'm trying to install OpenBSD
>> 4.5 on a Lenovo Thinkpad W500 model 4058-CTO, with no success. With obsd
>> 4.4 it never got past hardware initialization, with 4.5 at least I get
>> the installer menu, but no for long:
>>
>> [...]
>> Proceed with install? [n] y
>> [...]
>>
>> No disks found
>> #
>>
>> And no, I don't expect developers to _scramble to their laptops_ just
>> because I as an OpenBSD user am _entitled to have this fixed ASAP_ and
>> stuff like that. I was at least happy to see that the Fathers of OpenBSD
>> in their infinite wisdom decided to use plain ftp for downloading
>> packages, and not some custom-built single-purpose
>> binary-installer-builtin, so I could at least get a dmesg off the box (I
>> didn't manage to get a screen capture over USB).
>>
>> The output from the 'dmesg' command run from the shell commandline is
>> listed below. I'm only an "index" list member, but feel free to contact
>> me offlist if you need more info. I'll be happy to help testing any
>> updates. And I'll be following any replies through the archives of
>> course.
>>
>> An otherwise very happy OpenBSD user,
>>
>>
>> Bill
>>
>>
>> dmesg:
>> --------------------------------------------------------------------------
>> OpenBSD 4.5 (RAMDISK_CD) #1112: Sat Feb 28 15:06:26 MST 2009
>> B  B  [hidden email]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
>> cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel"
>> 686-class) 2.53 GHz
>> cpu0:
>>
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C
X16,xTPR

>> real mem B = 3214176256 (3065MB)
>> avail mem = 3115958272 (2971MB)
>> mainbus0 at root
>> bios0 at mainbus0: AT/286+ BIOS, date 09/24/08, BIOS32 rev. 0 @ 0xfdc80,
>> SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
>> bios0: vendor LENOVO version "6FET46WW (1.16 )" date 09/24/2008
>> bios0: LENOVO 4058CTO
>> acpi0 at bios0: rev 2
>> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT
>> SSDT SSDT SSDT SSDT
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: apic clock running at 265MHz
>> cpu at mainbus0: not configured
>> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
>> ioapic0: misconfigured as apic 2, remapped to apid 1
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus 1 (AGP_)
>> acpiprt2 at acpi0: bus 2 (EXP0)
>> acpiprt3 at acpi0: bus 3 (EXP1)
>> acpiprt4 at acpi0: bus -1 (EXP2)
>> acpiprt5 at acpi0: bus 5 (EXP3)
>> acpiprt6 at acpi0: bus 13 (EXP4)
>> acpiprt7 at acpi0: bus 21 (PCI1)
>> bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x1000 0xd1000/0x1000
>> 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
>> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
>> ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16
>> (irq 11)
>> pci1 at ppb0 bus 1
>> vga1 at pci1 dev 0 function 0 "ATI Mobility Radeon HD 3650" rev 0x00
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
>> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1
>> int 20 (irq 11), address 00:1c:25:97:34:61
>> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
>> 20 (irq 11)
>> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
>> 21 (irq 11)
>> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
>> 22 (irq 11)
>> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
>> 23 (irq 11)
>> usb0 at ehci0: USB revision 2.0
>> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> "Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not
>> configured
>> ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int
>> 20 (irq 11)
>> pci2 at ppb1 bus 2
>> ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int
>> 21 (irq 11)
>> pci3 at ppb2 bus 3
>> iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300AGN" rev 0x00: apic 1
>> int 17 (irq 11), MIMO 3T3R, MoW, address 00:16:ea:a3:00:2c
>> ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int
>> 23 (irq 11)
>> pci4 at ppb3 bus 5
>> ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int
>> 20 (irq 11)
>> pci5 at ppb4 bus 13
>> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
>> 16 (irq 11)
>> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
>> 17 (irq 11)
>> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
>> 18 (irq 11)
>> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
>> 19 (irq 11)
>> usb1 at ehci1: USB revision 2.0
>> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
>> pci6 at ppb5 bus 21
>> cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int
>> 16 (irq 11)
>> "Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 0 function 1 not configured
>> "Ricoh 5C822 SD/MMC" rev 0x21 at pci6 dev 0 function 2 not configured
>> "Ricoh 5C843 MMC" rev 0x11 at pci6 dev 0 function 3 not configured
>> "Ricoh 5C592 Memory Stick" rev 0x11 at pci6 dev 0 function 4 not
>> configured
>> "Ricoh 5C852 xD" rev 0x11 at pci6 dev 0 function 5 not configured
>> cardslot0 at cbb0 slot 0 flags 0
>> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
>> pcmcia0 at cardslot0
>> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
>> pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA,
>> channel 0 configured to native-PCI, channel 1 configured to native-PCI
>> pciide0: using apic 1 int 16 (irq 255) for native-PCI interrupt
>> pciide0: couldn't map channel 0 cmd regs
>> pciide0: couldn't map channel 1 cmd regs
>> "Intel 82801I SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
>> usb2 at uhci0: USB revision 1.0
>> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb3 at uhci1: USB revision 1.0
>> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb4 at uhci2: USB revision 1.0
>> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb5 at uhci3: USB revision 1.0
>> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb6 at uhci4: USB revision 1.0
>> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> usb7 at uhci5: USB revision 1.0
>> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> isa0 at pcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> rd0: fixed, 3800 blocks
>> "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2 at
>> uhub0 port 6 not configured
>> "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev
>> 2.00/3.52 addr 2 at uhub3 port 2 not configured
>> "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 2 at uhub7 port
>> 2 not configured
>> softraid0 at root
>> root on rd0a swap on rd0b dump on rd0b
>> --------------------------------------------------------------------------
>
>



--
http://www.openbsd.org/lyrics.html

Reply | Threaded
Open this post in threaded view
|

Re: No OpenBSD for Lenovo Thinkpad w500 4058CTO

Bill Maas-2
In reply to this post by Nick Guenther
Hi Nick,

On Tue, 2009-05-05 at 09:48 -0400, Nick Guenther wrote:
> Your disks aren't showing up in dmesg. Try tweaking your BIOS
> settings--i know that I had to change from IDE emulation to AHCI when
> I upgraded to 4.5.

That did the trick. Thanks. I'm hoping to replace my current GNOME
desktop with an OpenBSD-based one, so I can keep more in touch with this
excellent little system;).

Bill

> On 05/05/2009, Bill Maas <[hidden email]> wrote:
> > Hi,
> >
> > First, and just for the record: while trying to set up an FTP server on
> > OpenBSD 4.2 I got this error message while trying to connect by any
> > other address than 'localhost':
> >
> > 421 Service not available, remote server has closed connection.
> >
> > Reason, it turned out: a missing entry in /etc/hosts.allow. I had a hard
> > time finding anything relevant out there, so now at least the relation
> > between the error message and the missing entry is documented.
> >
> >
> > The reason I needed an FTP server is that I'm trying to install OpenBSD
> > 4.5 on a Lenovo Thinkpad W500 model 4058-CTO, with no success. With obsd
> > 4.4 it never got past hardware initialization, with 4.5 at least I get
> > the installer menu, but no for long:
> >
> > [...]
> > Proceed with install? [n] y
> > [...]
> >
> > No disks found
> > #
> >
> > And no, I don't expect developers to _scramble to their laptops_ just
> > because I as an OpenBSD user am _entitled to have this fixed ASAP_ and
> > stuff like that. I was at least happy to see that the Fathers of OpenBSD
> > in their infinite wisdom decided to use plain ftp for downloading
> > packages, and not some custom-built single-purpose
> > binary-installer-builtin, so I could at least get a dmesg off the box (I
> > didn't manage to get a screen capture over USB).
> >
> > The output from the 'dmesg' command run from the shell commandline is
> > listed below. I'm only an "index" list member, but feel free to contact
> > me offlist if you need more info. I'll be happy to help testing any
> > updates. And I'll be following any replies through the archives of
> > course.
> >
> > An otherwise very happy OpenBSD user,
> >
> >
> > Bill
> >
> >
> > dmesg:
> > --------------------------------------------------------------------------
> > OpenBSD 4.5 (RAMDISK_CD) #1112: Sat Feb 28 15:06:26 MST 2009
> >     [hidden email]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> > cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel"
> > 686-class) 2.53 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
> > real mem  = 3214176256 (3065MB)
> > avail mem = 3115958272 (2971MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 09/24/08, BIOS32 rev. 0 @ 0xfdc80,
> > SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
> > bios0: vendor LENOVO version "6FET46WW (1.16 )" date 09/24/2008
> > bios0: LENOVO 4058CTO
> > acpi0 at bios0: rev 2
> > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT
> > SSDT SSDT SSDT SSDT
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 265MHz
> > cpu at mainbus0: not configured
> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> > ioapic0: misconfigured as apic 2, remapped to apid 1
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (AGP_)
> > acpiprt2 at acpi0: bus 2 (EXP0)
> > acpiprt3 at acpi0: bus 3 (EXP1)
> > acpiprt4 at acpi0: bus -1 (EXP2)
> > acpiprt5 at acpi0: bus 5 (EXP3)
> > acpiprt6 at acpi0: bus 13 (EXP4)
> > acpiprt7 at acpi0: bus 21 (PCI1)
> > bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x1000 0xd1000/0x1000
> > 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> > ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16
> > (irq 11)
> > pci1 at ppb0 bus 1
> > vga1 at pci1 dev 0 function 0 "ATI Mobility Radeon HD 3650" rev 0x00
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1
> > int 20 (irq 11), address 00:1c:25:97:34:61
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
> > 20 (irq 11)
> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
> > 21 (irq 11)
> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
> > 22 (irq 11)
> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
> > 23 (irq 11)
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > "Intel 82801I HD Audio" rev 0x03 at pci0 dev 27 function 0 not
> > configured
> > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int
> > 20 (irq 11)
> > pci2 at ppb1 bus 2
> > ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int
> > 21 (irq 11)
> > pci3 at ppb2 bus 3
> > iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300AGN" rev 0x00: apic 1
> > int 17 (irq 11), MIMO 3T3R, MoW, address 00:16:ea:a3:00:2c
> > ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int
> > 23 (irq 11)
> > pci4 at ppb3 bus 5
> > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int
> > 20 (irq 11)
> > pci5 at ppb4 bus 13
> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
> > 16 (irq 11)
> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
> > 17 (irq 11)
> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
> > 18 (irq 11)
> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
> > 19 (irq 11)
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> > pci6 at ppb5 bus 21
> > cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int
> > 16 (irq 11)
> > "Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 0 function 1 not configured
> > "Ricoh 5C822 SD/MMC" rev 0x21 at pci6 dev 0 function 2 not configured
> > "Ricoh 5C843 MMC" rev 0x11 at pci6 dev 0 function 3 not configured
> > "Ricoh 5C592 Memory Stick" rev 0x11 at pci6 dev 0 function 4 not
> > configured
> > "Ricoh 5C852 xD" rev 0x11 at pci6 dev 0 function 5 not configured
> > cardslot0 at cbb0 slot 0 flags 0
> > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
> > pcmcia0 at cardslot0
> > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> > pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x03: DMA,
> > channel 0 configured to native-PCI, channel 1 configured to native-PCI
> > pciide0: using apic 1 int 16 (irq 255) for native-PCI interrupt
> > pciide0: couldn't map channel 0 cmd regs
> > pciide0: couldn't map channel 1 cmd regs
> > "Intel 82801I SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
> > usb2 at uhci0: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > rd0: fixed, 3800 blocks
> > "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2 at
> > uhub0 port 6 not configured
> > "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev
> > 2.00/3.52 addr 2 at uhub3 port 2 not configured
> > "Lenovo Integrated Smart Card Reader" rev 2.00/1.00 addr 2 at uhub7 port
> > 2 not configured
> > softraid0 at root
> > root on rd0a swap on rd0b dump on rd0b
> > --------------------------------------------------------------------------

Reply | Threaded
Open this post in threaded view
|

Kernel panic while accessing ext3 partition

Bill Maas-2
Hi,

I got a "bad ref count" panic message while trying to access a directory
on a 45 GB ext3 partition. Below is what I managed to salvage. Any
workarounds for this? Anyway, got GNOME on OpenBSD up and running, made
very easy, great!

Bill

---------------------------------------------------------------------------------------------------------------------------
b5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 21
cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int
16 (irq 11)
"Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 0 function 1 not configured
sdhc0 at pci6 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int
18 (irq 11)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x11 at pci6 dev 0 function 3 not configured
"Ricoh 5C592 Memory Stick" rev 0x11 at pci6 dev 0 function 4 not
configured
"Ricoh 5C852 xD" rev 0x11 at pci6 dev 0 function 5 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int
16 (irq 11), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9320421AS, SD13> SCSI3 0/direct
fixed
sd0: 305245MB, 512 bytes/sec, 625142448 sec total
cd0 at scsibus0 targ 1 lun 0: <MATSHITA, DVD-RAM UJ862A, SB04> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1
int 23 (irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2
video0 at uvideo0
ubt0 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with
Enhanced Data Rate II" rev 2.00/3.52 addr 2
ugen0 at uhub7 port 2 "Lenovo Integrated Smart Card Reader" rev
2.00/1.00 addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
vrele: bad ref count: 0xd99ad788, type VBLK, use 0, write 0, hold 6,
flags (VBIOONFREELIST)
        tag VT_UFS, ino 1188, on dev 4, 0 flags 0x0, effnlink 1, nlink 1
        mode 060640, owner 0, group 5, size 0 not locked
panic: vrele: ref cnt
Stopped at Debugger+0x4: leave
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS
PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> ddb> Debugger(0,d991e550,df754ae0,d99ad788,d99b8008) at Debugger
+0x4
panic(d06f545f,d99ad788,0,d991e550,d99532e0) at panic+0x55
vrele(d99ad788,6,0,d0381e08) at vrele+0xa2
ext2fs_reclaim(df754b18,d08106a8,0,d991e550,d07a95e4) at ext2fs_reclaim
+0x89
VOP_RECLAIM(d991e550,d99b8008,d99b8008,0) at VOP_RECLAIM+0x28
vclean(d991e550,8,d99b8008,0,d3b36c00) at vclean+0x76
vgonel(d991e550,d99b8008,0,d99b8008,d94a6130) at vgonel+0x3e
vrecycle(d991e550,d99b8008,d99b8008,18f3) at vrecycle+0x20
ext2fs_inactive(df754c08,1780,df754c30,d037b6fd,d07a95d8) at
ext2fs_inactive+0xdc
VOP_INACTIVE(d991e550,d99b8008,df754c80,d0458b27,16) at VOP_INACTIVE
+0x28
vput(d991e550,df754c6c,d3b4b400,df754c70,1780) at vput+0x36
ext2fs_vget(d3e0d800,178001,df754d28,178001) at ext2fs_vget+0x167
ext2fs_lookup(df754d58,d99b8008,df754d70,d0380823,d07a94b8) at
ext2fs_lookup+0x62e
VOP_LOOKUP(d995af28,df754e58,df754e6c,20) at VOP_LOOKUP+0x2e
lookup(df754e48,d9814c00,400,df754e60) at lookup+0x1d0
namei(df754e48,20042,0,0) at namei+0x18c
sys_lstat(d99b8008,df754f68,df754f58,cfbc2810,d99b8008) at sys_lstat
+0x4a
syscall() at syscall+0x24e
--- syscall (number 293) ---
0x1c023f35:
ddb>    PID   PPID   PGRP    UID  S       FLAGS  WAIT
COMMAND        
  9152      1  24654   1000  3      0x4080  poll
notification-are
 19989      1  24654   1000  3      0x4080  poll
clock-applet    
 32558      1  24654   1000  3      0x4080  poll
mixer_applet2  
 30896      1  11290   1000  3      0x4080  poll
gvfsd-trash    
 19245      1  19245   1000  3        0x80  poll
gnome-screensave
 17846      1  24654   1000  3      0x4080  poll
wnck-applet    
 16498      1  11290   1000  3      0x4080  poll
gvfsd          
 17649  24037  24037   1000  3      0x4080  poll
nautilus        
 24654      1  24654   1000  3      0x4080  poll
bonobo-activatio
  3705  24037  24037   1000  3      0x4080  poll
gnome-panel    
  7845  24037  24037   1000  3      0x4080  poll
metacity        
 23284      1  24037   1000  3        0x80  poll
gnome-keyring-da
 13936      1  13936   1000  3        0x80  poll
gnome-settings-d
 29729  24037  24037   1000  3      0x4080  poll
gnome-keyring-da
  9228      1  11290   1000  3      0x4080  poll
gconfd-2        
 11290      1  11290   1000  3        0x80  poll
dbus-daemon    
 30807      1  24037   1000  3        0x80  poll
dbus-launch    
 24037    397  24037   1000  3      0x4080  poll
gnome-session  
 24869  10607  10607      0  3     0x40180  netio
Xorg            
 18675      1  18675      0  3      0x4082  ttyin
getty          
 22989      1  22989      0  3      0x4082  ttyin
getty          
 20753      1  20753      0  3      0x4082  ttyin
getty          
 15769      1  15769      0  3      0x4082  ttyin
getty          
*28095      1  28095      0  7      0x4002
ksh            
  6922      1   6922      0  3        0x80  select
cron            
 10607    397  10607     35  3     0x44180  select
Xorg            
   397  13913    397      0  3       0x188  select
gdm-binary      
 13913      1  13913      0  3       0x188  poll
gdm-binary      
 24532      1  24532      0  3     0x40180  select
sendmail        
 32394      1  32394      0  3        0x80  select
sshd            
 19572      1  19572      0  3       0x180  select
inetd          
 12826  16107  20747     83  3       0x180  poll
ntpd            
 16107  20747  20747     83  3       0x180  poll
ntpd            
 20747      1  20747      0  3        0x80  poll
ntpd            
 30895  11469  11469     73  2       0x180
syslogd        
 11469      1  11469      0  3        0x88  netio
syslogd        
    22      0      0      0  3    0x100200  bored
crypto          
    21      0      0      0  3    0x100200  aiodoned
aiodoned        
    20      0      0      0  3    0x100200  syncer
update          
    19      0      0      0  2    0x100200
cleaner        
    18      0      0      0  3    0x100200  reaper
reaper          
    17      0      0      0  3    0x100200  pgdaemon
pagedaemon      
    16      0      0      0  3    0x100200  pftm
pfpurge        
    15      0      0      0  3    0x100200  usbevt
usb7            
    14      0      0      0  3    0x100200  usbevt
usb6            
    13      0      0      0  3    0x100200  usbevt
usb5            
    12      0      0      0  3    0x100200  usbevt
usb4            
    11      0      0      0  3    0x100200  usbevt
usb3            
    10      0      0      0  3    0x100200  usbevt
usb2            
     9      0      0      0  3    0x100200  mmctsk
sdmmc0          
     8      0      0      0  3    0x100200  usbevt
usb1            
     7      0      0      0  3    0x100200  usbtsk
usbtask        
     6      0      0      0  3    0x100200  usbevt
usb0            
     5      0      0      0  3    0x100200  ecwait
acpi0          
     4      0      0      0  3    0x100200  bored
syswq          
     3      0      0      0  3    0x100200
idle0          
     2      0      0      0  3    0x100200  kmalloc
kmthread        
     1      0      1      0  3      0x4080  wait
init            
     0     -1      0      0  3     0x80200  scheduler
swapper        
ddb> ds                  0x10
es            0xd0200010 kernel_text+0x10
fs            0xdf750058 end+0xee8a9d4
gs            0xdf750010 end+0xee8a98c
edi                0x100
esi           0xd06f545f netlck+0x9ec
ebp           0xdf754aa0 end+0xee8f41c
ebx           0xdf754acc end+0xee8f448
edx                    0
ecx           0xd07a8c58 kprintf_mutex
eax                  0x1
eip           0xd0499848 Debugger+0x4
cs                   0x8
eflags             0x202
esp           0xdf754aa0 end+0xee8f41c
ss            0xdf750010 end+0xee8a98c
Debugger+0x4: leave
ddb> syncing disks... 5 5 done
WARNING: not updating battery clock
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel"
686-class) 2.53 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR
real mem  = 3214176256 (3065MB)
avail mem = 3114315776 (2970MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 09/24/08, BIOS32 rev. 0 @ 0xfdc80,
SMBIOS rev. 2.4 @ 0xe0010 (74 entries)
bios0: vendor LENOVO version "6FET46WW (1.16 )" date 09/24/2008
bios0: LENOVO 4058CTO
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT
SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "92P1133" serial   199 type LION oem
"Panasonic"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock at acpi0 not configured
acpivideo at acpi0 not configured
acpivideo at acpi0 not configured
bios0: ROM list: 0xc0000/0xfc00 0xd0000/0x1000 0xd1000/0x1000
0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617492506004925
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 19467 MHz (1292 mV): speeds: 19467, 1600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16
(irq 11)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Mobility Radeon HD 3650" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1
int 20 (irq 11), address 00:1c:25:97:34:61
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
20 (irq 11)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
21 (irq 11)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
22 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic
1 int 17 (irq 11)
azalia0: RIRB time out
azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant
CX20561
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int
20 (irq 11)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int
21 (irq 11)
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300AGN" rev 0x00: apic 1
int 17 (irq 11), MIMO 3T3R, MoW, address 00:16:ea:a3:00:2c
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int
23 (irq 11)
pci4 at ppb3 bus 5
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int
20 (irq 11)
pci5 at ppb4 bus 13
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int
16 (irq 11)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int
17 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int
18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int
19 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 21
cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int
16 (irq 11)
"Ricoh 5C832 Firewire" rev 0x04 at pci6 dev 0 function 1 not configured
sdhc0 at pci6 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int
18 (irq 11)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x11 at pci6 dev 0 function 3 not configured
"Ricoh 5C592 Memory Stick" rev 0x11 at pci6 dev 0 function 4 not
configured
"Ricoh 5C852 xD" rev 0x11 at pci6 dev 0 function 5 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int
16 (irq 11), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9320421AS, SD13> SCSI3 0/direct
fixed
sd0: 305245MB, 512 bytes/sec, 625142448 sec total
cd0 at scsibus0 targ 1 lun 0: <MATSHITA, DVD-RAM UJ862A, SB04> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1
int 23 (irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2
video0 at uvideo0
ubt0 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with
Enhanced Data Rate II" rev 2.00/3.52 addr 2
ugen0 at uhub7 port 2 "Lenovo Integrated Smart Card Reader" rev
2.00/1.00 addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
---------------------------------------------------------------------------------------------------------------------------