Multi media keys on wired USB keyboard not responding

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

Multi media keys on wired USB keyboard not responding

Erling Westenvik-2
Hi,
I am unable to get the four multimedia keys (Play/Pause, Volume
Decrement/Increment, Mute) on my old'ish USB Microsoft Wired Keyboard
600 to respond.
I have tried to do my homework by reading man pages, like
usbhidaction(1) and usbhidctl(1), and I've been looking at how-tos on
the net [1], but to no prevail and I've decided to reach out to misc@
for guidance. dmesg(1) below [2].

This is what I have tried:

1. Identifying key strokes:

   $ usbhidctl -l -f /dev/uhid0
   Consumer_Control.Play/Pause=1
   Consumer_Control.No_Event=1
   Consumer_Control.0xfe03=0
   Consumer_Control.0xfe04=0
   Consumer_Control.0xff05=0
   Consumer_Control.0xff02=0
   
   Consumer_Control.Unassigned=1
   Consumer_Control.No_Event=1
   Consumer_Control.0xfe03=0
   Consumer_Control.0xfe04=0
   Consumer_Control.0xff05=0
   Consumer_Control.0xff02=0
   
   [...identical output (except for name) for the other four keys...]

2. usbhidaction(1) configuration file:

   $ cat ~/.usbhidaction.conf
   Consumer:Play/Pause 1 mixerctl outputs.master.mute=toggle
   Consumer:Volume_Decrement 1 mixerctl outputs.master=-8
   Consumer:Volume_Increment 1 mixerctl outputs.master=+8
   Consumer:Mute 1 mixerctl outputs.master.mute=toggle

3. Executing usbhidaction during xsession or from xterm..

   $ usbhidaction -c ~/.usbhidaction.conf -f /dev/uhid0

   ..exits without errors but keys are not responding.

Bwt:
- I used to have a PS/2 keyboard with multi media keys and it was
  working well with the machine in question.
- The current USB keyboard is tested and fully functional on another
  machine running Windows 7.
- None of the multi media keys gets detected by xev(1).


Regards,

Erling

---
[1] https://www.bsdhowto.ch/extrakeys.html
[2] $ dmesg
OpenBSD 6.6-beta (GENERIC.MP) #314: Mon Sep 16 19:13:24 MDT 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 12867665920 (12271MB)
avail mem = 12464992256 (11887MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfcdf0 (57 entries)
bios0: vendor American Megatrends Inc. version "V1.15" date 03/04/2011
bios0: MICRO-STAR INTERNATIONAL CO.,LTD MS-7599
acpi0 at bios0: ACPI 1.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT
acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) P0PC(S4) UHC1(S4) UHC2(S4) UHC3(S4) USB4(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD Athlon(tm) II X4 635 Processor, 2907.73 MHz, 10-05-03
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
tsc_timecounter_init: TSC skew=0 observed drift=0
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 200MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
TSC skew=3
cpu1: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
tsc_timecounter_init: TSC skew=3 observed drift=0
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
TSC skew=4
cpu2: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu2: AMD erratum 721 detected and fixed
tsc_timecounter_init: TSC skew=4 observed drift=0
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
TSC skew=-18
cpu3: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu3: AMD erratum 721 detected and fixed
tsc_timecounter_init: TSC skew=-18 observed drift=0
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PCE2)
acpiprt2 at acpi0: bus -1 (PCE3)
acpiprt3 at acpi0: bus -1 (PCE4)
acpiprt4 at acpi0: bus -1 (PCE5)
acpiprt5 at acpi0: bus 2 (PCE6)
acpiprt6 at acpi0: bus -1 (PCE7)
acpiprt7 at acpi0: bus -1 (PCE9)
acpiprt8 at acpi0: bus -1 (PCEA)
acpiprt9 at acpi0: bus -1 (PCEB)
acpiprt10 at acpi0: bus -1 (PCEC)
acpiprt11 at acpi0: bus 3 (P0PC)
acpicpu0 at acpi0: C1(@1 halt!), PSS
acpicpu1 at acpi0: C1(@1 halt!), PSS
acpicpu2 at acpi0: C1(@1 halt!), PSS
acpicpu3 at acpi0: C1(@1 halt!), PSS
acpipci0 at acpi0 PCI0: _OSC failed
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
cpu0: 2907 MHz: speeds: 2900 2200 1700 800 MHz
pci0 at mainbus0 bus 0
0:0:0: mem address conflict 0xe0000000/0x20000000
pchb0 at pci0 dev 0 function 0 "ATI RX780 Host" rev 0x00
ppb0 at pci0 dev 2 function 0 "ATI RD790 PCIE" rev 0x00
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 5770" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5700 Audio" rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 6 function 0 "ATI RD790 PCIE" rev 0x00
pci2 at ppb1 bus 2
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), msi, address 40:61:86:c6:16:49
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 22, AHCI 1.1
ahci0: port 0: 1.5Gb/s
ahci0: port 1: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST3250410AS, 3.AA> t10.ATA_ST3250410AS_9RY1SS4X
sd0: 238475MB, 512 bytes/sector, 488397168 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG HD403LJ, CT10> naa.50000f001b400584
sd1: 381554MB, 512 bytes/sector, 781422768 sectors
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 16, version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 16, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI
iic0 at piixpm0
iic0: addr 0x28 01=00 02=00 03=00 04=00 05=00 06=00 07=03 3e=03 41=00 42=00 43=00 44=00 45=00 46=00 47=03 81=00 82=00 83=00 84=00 85=00 86=00 87=03 c1=00 c2=00 c3=00 c4=00 c5=00 c6=00 c7=03 words 00=ff00 01=0000 02=0000 03=00ff 04=00ff 05=00ff 06=00ff 07=ffff
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
spdmem3 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 1 drive 0
scsibus2 at atapiscsi0: 2 targets
cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVDRAM GH40N, NV02> removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 4 int 16
azalia1: codecs: Realtek ALC888
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci3 at ppb2 bus 3
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: probed fifo depth: 15 bytes
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
vmm0 at mainbus0: SVM/RVI
uhidev0 at uhub3 port 3 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/27.20 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 8 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub4 port 3 configuration 1 interface 0 "Microsoft Wired Keyboard 600" rev 1.10/1.10 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub4 port 3 configuration 1 interface 1 "Microsoft Wired Keyboard 600" rev 1.10/1.10 addr 2
uhidev2: iclass 3/0, 3 report ids
uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
uhid1 at uhidev2 reportid 3: input=1, output=0, feature=0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
sd2: 238417MB, 512 bytes/sector, 488279018 sectors
root on sd2a (b14f96613fb578e5.a) swap on sd2b dump on sd2b
initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x1682:0x2990 0x00).
radeondrm0: 1920x1080, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
sd3 at scsibus4 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006>
sd3: 237382MB, 512 bytes/sector, 486158505 sectors

Reply | Threaded
Open this post in threaded view
|

Re: Multi media keys on wired USB keyboard not responding

Anatoli
Hi Erling,

Your problem is probably with the page name. Check it with usbhidctl -r
-f /dev/uhid0 (the value you're interested in is what is shown for
"Collection page").

Also, it's probably required for the actions to go on new lines in the
action config. And for dubugging I'd use something like `echo 1 >>
/tmp/uhid_debug` so you know that it's working, e.g.:

Consumer:Volume_Decrement 1
        echo 1 >> /tmp/uhid_debug

On the other hand, I'm working on a new driver that would make all this
usbhid* operations unnecessary, the keys would work natively.

Regards,
Anatoli

On 2/10/19 09:54, Erling Westenvik wrote:

> Hi,
> I am unable to get the four multimedia keys (Play/Pause, Volume
> Decrement/Increment, Mute) on my old'ish USB Microsoft Wired Keyboard
> 600 to respond.
> I have tried to do my homework by reading man pages, like
> usbhidaction(1) and usbhidctl(1), and I've been looking at how-tos on
> the net [1], but to no prevail and I've decided to reach out to misc@
> for guidance. dmesg(1) below [2].
>
> This is what I have tried:
>
> 1. Identifying key strokes:
>
>    $ usbhidctl -l -f /dev/uhid0
>    Consumer_Control.Play/Pause=1
>    Consumer_Control.No_Event=1
>    Consumer_Control.0xfe03=0
>    Consumer_Control.0xfe04=0
>    Consumer_Control.0xff05=0
>    Consumer_Control.0xff02=0
>    
>    Consumer_Control.Unassigned=1
>    Consumer_Control.No_Event=1
>    Consumer_Control.0xfe03=0
>    Consumer_Control.0xfe04=0
>    Consumer_Control.0xff05=0
>    Consumer_Control.0xff02=0
>    
>    [...identical output (except for name) for the other four keys...]
>
> 2. usbhidaction(1) configuration file:
>
>    $ cat ~/.usbhidaction.conf
>    Consumer:Play/Pause 1 mixerctl outputs.master.mute=toggle
>    Consumer:Volume_Decrement 1 mixerctl outputs.master=-8
>    Consumer:Volume_Increment 1 mixerctl outputs.master=+8
>    Consumer:Mute 1 mixerctl outputs.master.mute=toggle
>
> 3. Executing usbhidaction during xsession or from xterm..
>
>    $ usbhidaction -c ~/.usbhidaction.conf -f /dev/uhid0
>
>    ..exits without errors but keys are not responding.
>
> Bwt:
> - I used to have a PS/2 keyboard with multi media keys and it was
>   working well with the machine in question.
> - The current USB keyboard is tested and fully functional on another
>   machine running Windows 7.
> - None of the multi media keys gets detected by xev(1).
>
>
> Regards,
>
> Erling
>
> ---
> [1] https://www.bsdhowto.ch/extrakeys.html
> [2] $ dmesg
> OpenBSD 6.6-beta (GENERIC.MP) #314: Mon Sep 16 19:13:24 MDT 2019
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 12867665920 (12271MB)
> avail mem = 12464992256 (11887MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfcdf0 (57 entries)
> bios0: vendor American Megatrends Inc. version "V1.15" date 03/04/2011
> bios0: MICRO-STAR INTERNATIONAL CO.,LTD MS-7599
> acpi0 at bios0: ACPI 1.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT
> acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) P0PC(S4) UHC1(S4) UHC2(S4) UHC3(S4) USB4(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD Athlon(tm) II X4 635 Processor, 2907.73 MHz, 10-05-03
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> cpu0: AMD erratum 721 detected and fixed
> tsc_timecounter_init: TSC skew=0 observed drift=0
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 200MHz
> cpu0: mwait min=64, max=64, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> TSC skew=3
> cpu1: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
> cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> cpu1: AMD erratum 721 detected and fixed
> tsc_timecounter_init: TSC skew=3 observed drift=0
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> TSC skew=4
> cpu2: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
> cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
> cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> cpu2: AMD erratum 721 detected and fixed
> tsc_timecounter_init: TSC skew=4 observed drift=0
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> TSC skew=-18
> cpu3: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
> cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
> cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> cpu3: AMD erratum 721 detected and fixed
> tsc_timecounter_init: TSC skew=-18 observed drift=0
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpihpet0 at acpi0: 14318180 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 1 (PCE2)
> acpiprt2 at acpi0: bus -1 (PCE3)
> acpiprt3 at acpi0: bus -1 (PCE4)
> acpiprt4 at acpi0: bus -1 (PCE5)
> acpiprt5 at acpi0: bus 2 (PCE6)
> acpiprt6 at acpi0: bus -1 (PCE7)
> acpiprt7 at acpi0: bus -1 (PCE9)
> acpiprt8 at acpi0: bus -1 (PCEA)
> acpiprt9 at acpi0: bus -1 (PCEB)
> acpiprt10 at acpi0: bus -1 (PCEC)
> acpiprt11 at acpi0: bus 3 (P0PC)
> acpicpu0 at acpi0: C1(@1 halt!), PSS
> acpicpu1 at acpi0: C1(@1 halt!), PSS
> acpicpu2 at acpi0: C1(@1 halt!), PSS
> acpicpu3 at acpi0: C1(@1 halt!), PSS
> acpipci0 at acpi0 PCI0: _OSC failed
> acpicmos0 at acpi0
> acpibtn0 at acpi0: PWRB
> "PNP0C14" at acpi0 not configured
> cpu0: 2907 MHz: speeds: 2900 2200 1700 800 MHz
> pci0 at mainbus0 bus 0
> 0:0:0: mem address conflict 0xe0000000/0x20000000
> pchb0 at pci0 dev 0 function 0 "ATI RX780 Host" rev 0x00
> ppb0 at pci0 dev 2 function 0 "ATI RD790 PCIE" rev 0x00
> pci1 at ppb0 bus 1
> radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 5770" rev 0x00
> drm0 at radeondrm0
> radeondrm0: msi
> azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5700 Audio" rev 0x00: msi
> azalia0: no supported codecs
> ppb1 at pci0 dev 6 function 0 "ATI RD790 PCIE" rev 0x00
> pci2 at ppb1 bus 2
> re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), msi, address 40:61:86:c6:16:49
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 22, AHCI 1.1
> ahci0: port 0: 1.5Gb/s
> ahci0: port 1: 3.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, ST3250410AS, 3.AA> t10.ATA_ST3250410AS_9RY1SS4X
> sd0: 238475MB, 512 bytes/sector, 488397168 sectors
> sd1 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG HD403LJ, CT10> naa.50000f001b400584
> sd1: 381554MB, 512 bytes/sector, 781422768 sectors
> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 16, version 1.0, legacy support
> ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 16, version 1.0, legacy support
> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
> ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 19
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI
> iic0 at piixpm0
> iic0: addr 0x28 01=00 02=00 03=00 04=00 05=00 06=00 07=03 3e=03 41=00 42=00 43=00 44=00 45=00 46=00 47=03 81=00 82=00 83=00 84=00 85=00 86=00 87=03 c1=00 c2=00 c3=00 c4=00 c5=00 c6=00 c7=03 words 00=ff00 01=0000 02=0000 03=00ff 04=00ff 05=00ff 06=00ff 07=ffff
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
> spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
> spdmem3 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
> pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus2 at atapiscsi0: 2 targets
> cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVDRAM GH40N, NV02> removable
> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
> azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 4 int 16
> azalia1: codecs: Realtek ALC888
> audio0 at azalia1
> pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
> ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
> pci3 at ppb2 bus 3
> ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
> pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
> pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
> pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
> km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
> pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
> usb2 at ohci0: USB revision 1.0
> uhub2 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> usb3 at ohci1: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> usb4 at ohci2: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> usb5 at ohci3: USB revision 1.0
> uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: probed fifo depth: 15 bytes
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> usb6 at ohci4: USB revision 1.0
> uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> vmm0 at mainbus0: SVM/RVI
> uhidev0 at uhub3 port 3 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/27.20 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 8 buttons, Z and W dir
> wsmouse0 at ums0 mux 0
> uhidev1 at uhub4 port 3 configuration 1 interface 0 "Microsoft Wired Keyboard 600" rev 1.10/1.10 addr 2
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> uhidev2 at uhub4 port 3 configuration 1 interface 1 "Microsoft Wired Keyboard 600" rev 1.10/1.10 addr 2
> uhidev2: iclass 3/0, 3 report ids
> uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
> uhid1 at uhidev2 reportid 3: input=1, output=0, feature=0
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
> sd2: 238417MB, 512 bytes/sector, 488279018 sectors
> root on sd2a (b14f96613fb578e5.a) swap on sd2b dump on sd2b
> initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x1682:0x2990 0x00).
> radeondrm0: 1920x1080, 32bpp
> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> sd3 at scsibus4 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd3: 237382MB, 512 bytes/sector, 486158505 sectors
>

Reply | Threaded
Open this post in threaded view
|

Re: Multi media keys on wired USB keyboard not responding

Erling Westenvik-2
On Thu, Oct 03, 2019 at 03:08:54PM -0300, Anatoli wrote:
> Hi Erling,
Hi Anatoli, sorry for the late reply. Your answer somehow ended up in
in Gmail spam.
 
> Your problem is probably with the page name. Check it with usbhidctl -r
> -f /dev/uhid0 (the value you're interested in is what is shown for
> "Collection page").

$ usbhidctl -r -f /dev/uhid0
Report descriptor:
Collection page=Consumer usage=Consumer_Control
Input   size=16 count=1 Array page=Consumer usage=Unassigned..0x03ff, logical range 0..1023
Input   size=8 count=1 Array page=Keyboard usage=No_Event..0x00ff, logical range 0..255
Input   size=1 count=1 page=Microsoft usage=0xfe03, logical range 0..1
Input   size=1 count=1 page=Microsoft usage=0xfe04, logical range 0..1
Input   size=5 count=1 page=Microsoft usage=0xff05, logical range 0..31
Input   size=8 count=1 page=Microsoft usage=0xff02, logical range 0..255
End collection
Total   input size 7 bytes
Total  output size 0 bytes
Total feature size 0 bytes
>
> Also, it's probably required for the actions to go on new lines in the
> action config.

They do in my config. I just joined the lines in my original email
before sending. For no really good reason I admit.

>                And for dubugging I'd use something like `echo 1 >>
> /tmp/uhid_debug` so you know that it's working, e.g.:
> Consumer:Volume_Decrement 1
> echo 1 >> /tmp/uhid_debug

Absolutely no output. It's like the keys don't exist no matter what I
try. Are there ways to test for keyboard input at a lower level – like
in single user mode, before the USB driver potentially gets clogged by
other devices/processes?

> On the other hand, I'm working on a new driver that would make all this
> usbhid* operations unnecessary, the keys would work natively.

I'm looking forward to that! Please feel free to contact me for testing
diffs.

Regards,
Erling

>
> Regards,
> Anatoli
>
> On 2/10/19 09:54, Erling Westenvik wrote:
> > Hi,
> > I am unable to get the four multimedia keys (Play/Pause, Volume
> > Decrement/Increment, Mute) on my old'ish USB Microsoft Wired Keyboard
> > 600 to respond.
> > I have tried to do my homework by reading man pages, like
> > usbhidaction(1) and usbhidctl(1), and I've been looking at how-tos on
> > the net [1], but to no prevail and I've decided to reach out to misc@
> > for guidance. dmesg(1) below [2].
> >
> > This is what I have tried:
> >
> > 1. Identifying key strokes:
> >
> >    $ usbhidctl -l -f /dev/uhid0
> >    Consumer_Control.Play/Pause=1
> >    Consumer_Control.No_Event=1
> >    Consumer_Control.0xfe03=0
> >    Consumer_Control.0xfe04=0
> >    Consumer_Control.0xff05=0
> >    Consumer_Control.0xff02=0
> >    
> >    Consumer_Control.Unassigned=1
> >    Consumer_Control.No_Event=1
> >    Consumer_Control.0xfe03=0
> >    Consumer_Control.0xfe04=0
> >    Consumer_Control.0xff05=0
> >    Consumer_Control.0xff02=0
> >    
> >    [...identical output (except for name) for the other four keys...]
> >
> > 2. usbhidaction(1) configuration file:
> >
> >    $ cat ~/.usbhidaction.conf
> >    Consumer:Play/Pause 1 mixerctl outputs.master.mute=toggle
> >    Consumer:Volume_Decrement 1 mixerctl outputs.master=-8
> >    Consumer:Volume_Increment 1 mixerctl outputs.master=+8
> >    Consumer:Mute 1 mixerctl outputs.master.mute=toggle
> >
> > 3. Executing usbhidaction during xsession or from xterm..
> >
> >    $ usbhidaction -c ~/.usbhidaction.conf -f /dev/uhid0
> >
> >    ..exits without errors but keys are not responding.
> >
> > Bwt:
> > - I used to have a PS/2 keyboard with multi media keys and it was
> >   working well with the machine in question.
> > - The current USB keyboard is tested and fully functional on another
> >   machine running Windows 7.
> > - None of the multi media keys gets detected by xev(1).
> >
> >
> > Regards,
> >
> > Erling
> >
> > ---
> > [1] https://www.bsdhowto.ch/extrakeys.html
> > [2] $ dmesg
> > OpenBSD 6.6-beta (GENERIC.MP) #314: Mon Sep 16 19:13:24 MDT 2019
> >     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 12867665920 (12271MB)
> > avail mem = 12464992256 (11887MB)
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfcdf0 (57 entries)
> > bios0: vendor American Megatrends Inc. version "V1.15" date 03/04/2011
> > bios0: MICRO-STAR INTERNATIONAL CO.,LTD MS-7599
> > acpi0 at bios0: ACPI 1.0
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT
> > acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) P0PC(S4) UHC1(S4) UHC2(S4) UHC3(S4) USB4(S4) [...]
> > acpitimer0 at acpi0: 3579545 Hz, 32 bits
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: AMD Athlon(tm) II X4 635 Processor, 2907.73 MHz, 10-05-03
> > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
> > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
> > cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> > cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> > cpu0: AMD erratum 721 detected and fixed
> > tsc_timecounter_init: TSC skew=0 observed drift=0
> > cpu0: smt 0, core 0, package 0
> > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 200MHz
> > cpu0: mwait min=64, max=64, IBE
> > cpu1 at mainbus0: apid 1 (application processor)
> > TSC skew=3
> > cpu1: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
> > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
> > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
> > cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> > cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> > cpu1: AMD erratum 721 detected and fixed
> > tsc_timecounter_init: TSC skew=3 observed drift=0
> > cpu1: smt 0, core 1, package 0
> > cpu2 at mainbus0: apid 2 (application processor)
> > TSC skew=4
> > cpu2: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
> > cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
> > cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
> > cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> > cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> > cpu2: AMD erratum 721 detected and fixed
> > tsc_timecounter_init: TSC skew=4 observed drift=0
> > cpu2: smt 0, core 2, package 0
> > cpu3 at mainbus0: apid 3 (application processor)
> > TSC skew=-18
> > cpu3: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
> > cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
> > cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
> > cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> > cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> > cpu3: AMD erratum 721 detected and fixed
> > tsc_timecounter_init: TSC skew=-18 observed drift=0
> > cpu3: smt 0, core 3, package 0
> > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
> > acpimcfg0 at acpi0
> > acpimcfg0: addr 0xe0000000, bus 0-255
> > acpihpet0 at acpi0: 14318180 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 1 (PCE2)
> > acpiprt2 at acpi0: bus -1 (PCE3)
> > acpiprt3 at acpi0: bus -1 (PCE4)
> > acpiprt4 at acpi0: bus -1 (PCE5)
> > acpiprt5 at acpi0: bus 2 (PCE6)
> > acpiprt6 at acpi0: bus -1 (PCE7)
> > acpiprt7 at acpi0: bus -1 (PCE9)
> > acpiprt8 at acpi0: bus -1 (PCEA)
> > acpiprt9 at acpi0: bus -1 (PCEB)
> > acpiprt10 at acpi0: bus -1 (PCEC)
> > acpiprt11 at acpi0: bus 3 (P0PC)
> > acpicpu0 at acpi0: C1(@1 halt!), PSS
> > acpicpu1 at acpi0: C1(@1 halt!), PSS
> > acpicpu2 at acpi0: C1(@1 halt!), PSS
> > acpicpu3 at acpi0: C1(@1 halt!), PSS
> > acpipci0 at acpi0 PCI0: _OSC failed
> > acpicmos0 at acpi0
> > acpibtn0 at acpi0: PWRB
> > "PNP0C14" at acpi0 not configured
> > cpu0: 2907 MHz: speeds: 2900 2200 1700 800 MHz
> > pci0 at mainbus0 bus 0
> > 0:0:0: mem address conflict 0xe0000000/0x20000000
> > pchb0 at pci0 dev 0 function 0 "ATI RX780 Host" rev 0x00
> > ppb0 at pci0 dev 2 function 0 "ATI RD790 PCIE" rev 0x00
> > pci1 at ppb0 bus 1
> > radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 5770" rev 0x00
> > drm0 at radeondrm0
> > radeondrm0: msi
> > azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5700 Audio" rev 0x00: msi
> > azalia0: no supported codecs
> > ppb1 at pci0 dev 6 function 0 "ATI RD790 PCIE" rev 0x00
> > pci2 at ppb1 bus 2
> > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), msi, address 40:61:86:c6:16:49
> > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
> > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 22, AHCI 1.1
> > ahci0: port 0: 1.5Gb/s
> > ahci0: port 1: 3.0Gb/s
> > scsibus1 at ahci0: 32 targets
> > sd0 at scsibus1 targ 0 lun 0: <ATA, ST3250410AS, 3.AA> t10.ATA_ST3250410AS_9RY1SS4X
> > sd0: 238475MB, 512 bytes/sector, 488397168 sectors
> > sd1 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG HD403LJ, CT10> naa.50000f001b400584
> > sd1: 381554MB, 512 bytes/sector, 781422768 sectors
> > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 16, version 1.0, legacy support
> > ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 16, version 1.0, legacy support
> > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> > ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
> > ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
> > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 19
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI
> > iic0 at piixpm0
> > iic0: addr 0x28 01=00 02=00 03=00 04=00 05=00 06=00 07=03 3e=03 41=00 42=00 43=00 44=00 45=00 46=00 47=03 81=00 82=00 83=00 84=00 85=00 86=00 87=03 c1=00 c2=00 c3=00 c4=00 c5=00 c6=00 c7=03 words 00=ff00 01=0000 02=0000 03=00ff 04=00ff 05=00ff 06=00ff 07=ffff
> > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
> > spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
> > spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
> > spdmem3 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
> > pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
> > atapiscsi0 at pciide0 channel 1 drive 0
> > scsibus2 at atapiscsi0: 2 targets
> > cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVDRAM GH40N, NV02> removable
> > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
> > azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 4 int 16
> > azalia1: codecs: Realtek ALC888
> > audio0 at azalia1
> > pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
> > ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
> > pci3 at ppb2 bus 3
> > ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
> > pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
> > pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
> > pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
> > km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
> > pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
> > usb2 at ohci0: USB revision 1.0
> > uhub2 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at ohci1: USB revision 1.0
> > uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at ohci2: USB revision 1.0
> > uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at ohci3: USB revision 1.0
> > uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > com0: probed fifo depth: 15 bytes
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > usb6 at ohci4: USB revision 1.0
> > uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > vmm0 at mainbus0: SVM/RVI
> > uhidev0 at uhub3 port 3 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/27.20 addr 2
> > uhidev0: iclass 3/1
> > ums0 at uhidev0: 8 buttons, Z and W dir
> > wsmouse0 at ums0 mux 0
> > uhidev1 at uhub4 port 3 configuration 1 interface 0 "Microsoft Wired Keyboard 600" rev 1.10/1.10 addr 2
> > uhidev1: iclass 3/1
> > ukbd0 at uhidev1: 8 variable keys, 6 key codes
> > wskbd1 at ukbd0 mux 1
> > uhidev2 at uhub4 port 3 configuration 1 interface 1 "Microsoft Wired Keyboard 600" rev 1.10/1.10 addr 2
> > uhidev2: iclass 3/0, 3 report ids
> > uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
> > uhid1 at uhidev2 reportid 3: input=1, output=0, feature=0
> > vscsi0 at root
> > scsibus3 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus4 at softraid0: 256 targets
> > sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
> > sd2: 238417MB, 512 bytes/sector, 488279018 sectors
> > root on sd2a (b14f96613fb578e5.a) swap on sd2b dump on sd2b
> > initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x1682:0x2990 0x00).
> > radeondrm0: 1920x1080, 32bpp
> > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> > wskbd1: connecting to wsdisplay0
> > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > sd3 at scsibus4 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006>
> > sd3: 237382MB, 512 bytes/sector, 486158505 sectors
> >
>

Reply | Threaded
Open this post in threaded view
|

Re: Multi media keys on wired USB keyboard not responding

Erling Westenvik-2
Stupid me. The keyboard is working! For some reason I don't yet
understand, the usbhidaction(1) config file I created was set to "dos"
by vim(1) early in the process. Perhaps I copied in something I found on
the web. Anyway; hidden ^M's prevented mixerctl command executions, and
moreover; when Anatoli suggested I echo values into a dumpfile
/tmp/uhid_debug, I touch(1)ed that file before proceding, but then
usbhidaction created /tmp/uhid_debug^M instead and put its things in
there while I was busy looking at "tail -f /tmp/uhid_debug)"..
After changing filetype to "unix" everything works as expected. (Except
for my Print Screen key, but that was not covered by my OP anyway.)

Sorry for the noise! (..?! Curiously enough I discovered the "hidden"
debug file while testing noice(1)..)

Regards,

Erling

On Fri, Oct 04, 2019 at 04:39:18PM +0200, Erling Westenvik wrote:

> On Thu, Oct 03, 2019 at 03:08:54PM -0300, Anatoli wrote:
> > Hi Erling,
> Hi Anatoli, sorry for the late reply. Your answer somehow ended up in
> in Gmail spam.
>  
> > Your problem is probably with the page name. Check it with usbhidctl -r
> > -f /dev/uhid0 (the value you're interested in is what is shown for
> > "Collection page").
>
> $ usbhidctl -r -f /dev/uhid0
> Report descriptor:
> Collection page=Consumer usage=Consumer_Control
> Input   size=16 count=1 Array page=Consumer usage=Unassigned..0x03ff, logical range 0..1023
> Input   size=8 count=1 Array page=Keyboard usage=No_Event..0x00ff, logical range 0..255
> Input   size=1 count=1 page=Microsoft usage=0xfe03, logical range 0..1
> Input   size=1 count=1 page=Microsoft usage=0xfe04, logical range 0..1
> Input   size=5 count=1 page=Microsoft usage=0xff05, logical range 0..31
> Input   size=8 count=1 page=Microsoft usage=0xff02, logical range 0..255
> End collection
> Total   input size 7 bytes
> Total  output size 0 bytes
> Total feature size 0 bytes
> >
> > Also, it's probably required for the actions to go on new lines in the
> > action config.
>
> They do in my config. I just joined the lines in my original email
> before sending. For no really good reason I admit.
>
> >                And for dubugging I'd use something like `echo 1 >>
> > /tmp/uhid_debug` so you know that it's working, e.g.:
> > Consumer:Volume_Decrement 1
> > echo 1 >> /tmp/uhid_debug
>
> Absolutely no output. It's like the keys don't exist no matter what I
> try. Are there ways to test for keyboard input at a lower level – like
> in single user mode, before the USB driver potentially gets clogged by
> other devices/processes?
>
> > On the other hand, I'm working on a new driver that would make all this
> > usbhid* operations unnecessary, the keys would work natively.
>
> I'm looking forward to that! Please feel free to contact me for testing
> diffs.
>
> Regards,
> Erling
>
> >
> > Regards,
> > Anatoli
> >
> > On 2/10/19 09:54, Erling Westenvik wrote:
> > > Hi,
> > > I am unable to get the four multimedia keys (Play/Pause, Volume
> > > Decrement/Increment, Mute) on my old'ish USB Microsoft Wired Keyboard
> > > 600 to respond.
> > > I have tried to do my homework by reading man pages, like
> > > usbhidaction(1) and usbhidctl(1), and I've been looking at how-tos on
> > > the net [1], but to no prevail and I've decided to reach out to misc@
> > > for guidance. dmesg(1) below [2].
> > >
> > > This is what I have tried:
> > >
> > > 1. Identifying key strokes:
> > >
> > >    $ usbhidctl -l -f /dev/uhid0
> > >    Consumer_Control.Play/Pause=1
> > >    Consumer_Control.No_Event=1
> > >    Consumer_Control.0xfe03=0
> > >    Consumer_Control.0xfe04=0
> > >    Consumer_Control.0xff05=0
> > >    Consumer_Control.0xff02=0
> > >    
> > >    Consumer_Control.Unassigned=1
> > >    Consumer_Control.No_Event=1
> > >    Consumer_Control.0xfe03=0
> > >    Consumer_Control.0xfe04=0
> > >    Consumer_Control.0xff05=0
> > >    Consumer_Control.0xff02=0
> > >    
> > >    [...identical output (except for name) for the other four keys...]
> > >
> > > 2. usbhidaction(1) configuration file:
> > >
> > >    $ cat ~/.usbhidaction.conf
> > >    Consumer:Play/Pause 1 mixerctl outputs.master.mute=toggle
> > >    Consumer:Volume_Decrement 1 mixerctl outputs.master=-8
> > >    Consumer:Volume_Increment 1 mixerctl outputs.master=+8
> > >    Consumer:Mute 1 mixerctl outputs.master.mute=toggle
> > >
> > > 3. Executing usbhidaction during xsession or from xterm..
> > >
> > >    $ usbhidaction -c ~/.usbhidaction.conf -f /dev/uhid0
> > >
> > >    ..exits without errors but keys are not responding.
> > >
> > > Bwt:
> > > - I used to have a PS/2 keyboard with multi media keys and it was
> > >   working well with the machine in question.
> > > - The current USB keyboard is tested and fully functional on another
> > >   machine running Windows 7.
> > > - None of the multi media keys gets detected by xev(1).
> > >
> > >
> > > Regards,
> > >
> > > Erling
> > >
> > > ---
> > > [1] https://www.bsdhowto.ch/extrakeys.html
> > > [2] $ dmesg
> > > OpenBSD 6.6-beta (GENERIC.MP) #314: Mon Sep 16 19:13:24 MDT 2019
> > >     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > > real mem = 12867665920 (12271MB)
> > > avail mem = 12464992256 (11887MB)
> > > mpath0 at root
> > > scsibus0 at mpath0: 256 targets
> > > mainbus0 at root
> > > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfcdf0 (57 entries)
> > > bios0: vendor American Megatrends Inc. version "V1.15" date 03/04/2011
> > > bios0: MICRO-STAR INTERNATIONAL CO.,LTD MS-7599
> > > acpi0 at bios0: ACPI 1.0
> > > acpi0: sleep states S0 S3 S4 S5
> > > acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT
> > > acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) P0PC(S4) UHC1(S4) UHC2(S4) UHC3(S4) USB4(S4) [...]
> > > acpitimer0 at acpi0: 3579545 Hz, 32 bits
> > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > cpu0 at mainbus0: apid 0 (boot processor)
> > > cpu0: AMD Athlon(tm) II X4 635 Processor, 2907.73 MHz, 10-05-03
> > > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
> > > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
> > > cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> > > cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> > > cpu0: AMD erratum 721 detected and fixed
> > > tsc_timecounter_init: TSC skew=0 observed drift=0
> > > cpu0: smt 0, core 0, package 0
> > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > > cpu0: apic clock running at 200MHz
> > > cpu0: mwait min=64, max=64, IBE
> > > cpu1 at mainbus0: apid 1 (application processor)
> > > TSC skew=3
> > > cpu1: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
> > > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
> > > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
> > > cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> > > cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> > > cpu1: AMD erratum 721 detected and fixed
> > > tsc_timecounter_init: TSC skew=3 observed drift=0
> > > cpu1: smt 0, core 1, package 0
> > > cpu2 at mainbus0: apid 2 (application processor)
> > > TSC skew=4
> > > cpu2: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
> > > cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
> > > cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
> > > cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> > > cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> > > cpu2: AMD erratum 721 detected and fixed
> > > tsc_timecounter_init: TSC skew=4 observed drift=0
> > > cpu2: smt 0, core 2, package 0
> > > cpu3 at mainbus0: apid 3 (application processor)
> > > TSC skew=-18
> > > cpu3: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
> > > cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
> > > cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
> > > cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
> > > cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
> > > cpu3: AMD erratum 721 detected and fixed
> > > tsc_timecounter_init: TSC skew=-18 observed drift=0
> > > cpu3: smt 0, core 3, package 0
> > > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
> > > acpimcfg0 at acpi0
> > > acpimcfg0: addr 0xe0000000, bus 0-255
> > > acpihpet0 at acpi0: 14318180 Hz
> > > acpiprt0 at acpi0: bus 0 (PCI0)
> > > acpiprt1 at acpi0: bus 1 (PCE2)
> > > acpiprt2 at acpi0: bus -1 (PCE3)
> > > acpiprt3 at acpi0: bus -1 (PCE4)
> > > acpiprt4 at acpi0: bus -1 (PCE5)
> > > acpiprt5 at acpi0: bus 2 (PCE6)
> > > acpiprt6 at acpi0: bus -1 (PCE7)
> > > acpiprt7 at acpi0: bus -1 (PCE9)
> > > acpiprt8 at acpi0: bus -1 (PCEA)
> > > acpiprt9 at acpi0: bus -1 (PCEB)
> > > acpiprt10 at acpi0: bus -1 (PCEC)
> > > acpiprt11 at acpi0: bus 3 (P0PC)
> > > acpicpu0 at acpi0: C1(@1 halt!), PSS
> > > acpicpu1 at acpi0: C1(@1 halt!), PSS
> > > acpicpu2 at acpi0: C1(@1 halt!), PSS
> > > acpicpu3 at acpi0: C1(@1 halt!), PSS
> > > acpipci0 at acpi0 PCI0: _OSC failed
> > > acpicmos0 at acpi0
> > > acpibtn0 at acpi0: PWRB
> > > "PNP0C14" at acpi0 not configured
> > > cpu0: 2907 MHz: speeds: 2900 2200 1700 800 MHz
> > > pci0 at mainbus0 bus 0
> > > 0:0:0: mem address conflict 0xe0000000/0x20000000
> > > pchb0 at pci0 dev 0 function 0 "ATI RX780 Host" rev 0x00
> > > ppb0 at pci0 dev 2 function 0 "ATI RD790 PCIE" rev 0x00
> > > pci1 at ppb0 bus 1
> > > radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 5770" rev 0x00
> > > drm0 at radeondrm0
> > > radeondrm0: msi
> > > azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5700 Audio" rev 0x00: msi
> > > azalia0: no supported codecs
> > > ppb1 at pci0 dev 6 function 0 "ATI RD790 PCIE" rev 0x00
> > > pci2 at ppb1 bus 2
> > > re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), msi, address 40:61:86:c6:16:49
> > > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
> > > ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 22, AHCI 1.1
> > > ahci0: port 0: 1.5Gb/s
> > > ahci0: port 1: 3.0Gb/s
> > > scsibus1 at ahci0: 32 targets
> > > sd0 at scsibus1 targ 0 lun 0: <ATA, ST3250410AS, 3.AA> t10.ATA_ST3250410AS_9RY1SS4X
> > > sd0: 238475MB, 512 bytes/sector, 488397168 sectors
> > > sd1 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG HD403LJ, CT10> naa.50000f001b400584
> > > sd1: 381554MB, 512 bytes/sector, 781422768 sectors
> > > ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 16, version 1.0, legacy support
> > > ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 16, version 1.0, legacy support
> > > ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
> > > usb0 at ehci0: USB revision 2.0
> > > uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> > > ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
> > > ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
> > > ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 19
> > > usb1 at ehci1: USB revision 2.0
> > > uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
> > > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI
> > > iic0 at piixpm0
> > > iic0: addr 0x28 01=00 02=00 03=00 04=00 05=00 06=00 07=03 3e=03 41=00 42=00 43=00 44=00 45=00 46=00 47=03 81=00 82=00 83=00 84=00 85=00 86=00 87=03 c1=00 c2=00 c3=00 c4=00 c5=00 c6=00 c7=03 words 00=ff00 01=0000 02=0000 03=00ff 04=00ff 05=00ff 06=00ff 07=ffff
> > > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
> > > spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
> > > spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
> > > spdmem3 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
> > > pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
> > > atapiscsi0 at pciide0 channel 1 drive 0
> > > scsibus2 at atapiscsi0: 2 targets
> > > cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVDRAM GH40N, NV02> removable
> > > cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
> > > azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 4 int 16
> > > azalia1: codecs: Realtek ALC888
> > > audio0 at azalia1
> > > pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
> > > ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
> > > pci3 at ppb2 bus 3
> > > ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
> > > pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
> > > pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
> > > pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
> > > km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
> > > pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
> > > usb2 at ohci0: USB revision 1.0
> > > uhub2 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > > usb3 at ohci1: USB revision 1.0
> > > uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > > usb4 at ohci2: USB revision 1.0
> > > uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > > usb5 at ohci3: USB revision 1.0
> > > uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > > isa0 at pcib0
> > > isadma0 at isa0
> > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > > com0: probed fifo depth: 15 bytes
> > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > > pckbd0 at pckbc0 (kbd slot)
> > > wskbd0 at pckbd0: console keyboard
> > > pcppi0 at isa0 port 0x61
> > > spkr0 at pcppi0
> > > usb6 at ohci4: USB revision 1.0
> > > uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
> > > vmm0 at mainbus0: SVM/RVI
> > > uhidev0 at uhub3 port 3 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/27.20 addr 2
> > > uhidev0: iclass 3/1
> > > ums0 at uhidev0: 8 buttons, Z and W dir
> > > wsmouse0 at ums0 mux 0
> > > uhidev1 at uhub4 port 3 configuration 1 interface 0 "Microsoft Wired Keyboard 600" rev 1.10/1.10 addr 2
> > > uhidev1: iclass 3/1
> > > ukbd0 at uhidev1: 8 variable keys, 6 key codes
> > > wskbd1 at ukbd0 mux 1
> > > uhidev2 at uhub4 port 3 configuration 1 interface 1 "Microsoft Wired Keyboard 600" rev 1.10/1.10 addr 2
> > > uhidev2: iclass 3/0, 3 report ids
> > > uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
> > > uhid1 at uhidev2 reportid 3: input=1, output=0, feature=0
> > > vscsi0 at root
> > > scsibus3 at vscsi0: 256 targets
> > > softraid0 at root
> > > scsibus4 at softraid0: 256 targets
> > > sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
> > > sd2: 238417MB, 512 bytes/sector, 488279018 sectors
> > > root on sd2a (b14f96613fb578e5.a) swap on sd2b dump on sd2b
> > > initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x1682:0x2990 0x00).
> > > radeondrm0: 1920x1080, 32bpp
> > > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
> > > wskbd1: connecting to wsdisplay0
> > > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > > sd3 at scsibus4 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006>
> > > sd3: 237382MB, 512 bytes/sector, 486158505 sectors

Reply | Threaded
Open this post in threaded view
|

Re: Multi media keys on wired USB keyboard not responding

Anatoli
Erling,

:) can happen to anyone. I supposed there was something like this going
on as if usbhidctl shows the keys, there's basically no way for
usbhidaction not to work for some internal issue as uhid devices are
sort of character pseudo-devices and you can even read some keypress
events with doas cat /dev/uhid0 | od -x (or even without od).

The only thing usbhidaction does is it checks at init for descriptor
pages to see whether all the requested keys are defined (could be
ignored with -i) and starts listening for keypress events on the
specified uhid instance.

My next suggestion would have been to play with -v and -d args to
usbhidaction, but you figured it out yourself.

With respect to the PrintScreen button, I was experiencing the same and
I almost have a fix for it. If you search the archive for my email
titled "HID keyboard + usbhidctl weirdness" you'll see I was reporting
the same issues, but I went further and started to mess with the kernel
XD. The issue is basically the scancode for keypress is masked in one of
the mapping tables in keyboard drivers. I already figured the table for
wscons, had to find it for X. I'll send you a diff to test when ready.

Meanwhile, could you please send me the output from usbdevs -v and lsusb
-v (pkg_add usbutils) that corresponds to your keyboard device (there
could be more than one entry at different addresses – you can see which
devices correspond to your keyboard by running tail -f /var/log/messages
while you unplug and plug it again)?

Regards,
Anatoli

On 5/10/19 21:06, Erling Westenvik wrote:

> Stupid me. The keyboard is working! For some reason I don't yet
> understand, the usbhidaction(1) config file I created was set to "dos"
> by vim(1) early in the process. Perhaps I copied in something I found on
> the web. Anyway; hidden ^M's prevented mixerctl command executions, and
> moreover; when Anatoli suggested I echo values into a dumpfile
> /tmp/uhid_debug, I touch(1)ed that file before proceding, but then
> usbhidaction created /tmp/uhid_debug^M instead and put its things in
> there while I was busy looking at "tail -f /tmp/uhid_debug)"..
> After changing filetype to "unix" everything works as expected. (Except
> for my Print Screen key, but that was not covered by my OP anyway.)
>
> Sorry for the noise! (..?! Curiously enough I discovered the "hidden"
> debug file while testing noice(1)..)
>
> Regards,
>
> Erling
>
> On Fri, Oct 04, 2019 at 04:39:18PM +0200, Erling Westenvik wrote:
>> On Thu, Oct 03, 2019 at 03:08:54PM -0300, Anatoli wrote:
>>> Hi Erling,
>> Hi Anatoli, sorry for the late reply. Your answer somehow ended up in
>> in Gmail spam.
>>  
>>> Your problem is probably with the page name. Check it with usbhidctl -r
>>> -f /dev/uhid0 (the value you're interested in is what is shown for
>>> "Collection page").
>>
>> $ usbhidctl -r -f /dev/uhid0
>> Report descriptor:
>> Collection page=Consumer usage=Consumer_Control
>> Input   size=16 count=1 Array page=Consumer usage=Unassigned..0x03ff, logical range 0..1023
>> Input   size=8 count=1 Array page=Keyboard usage=No_Event..0x00ff, logical range 0..255
>> Input   size=1 count=1 page=Microsoft usage=0xfe03, logical range 0..1
>> Input   size=1 count=1 page=Microsoft usage=0xfe04, logical range 0..1
>> Input   size=5 count=1 page=Microsoft usage=0xff05, logical range 0..31
>> Input   size=8 count=1 page=Microsoft usage=0xff02, logical range 0..255
>> End collection
>> Total   input size 7 bytes
>> Total  output size 0 bytes
>> Total feature size 0 bytes
>>>
>>> Also, it's probably required for the actions to go on new lines in the
>>> action config.
>>
>> They do in my config. I just joined the lines in my original email
>> before sending. For no really good reason I admit.
>>
>>>                And for dubugging I'd use something like `echo 1 >>
>>> /tmp/uhid_debug` so you know that it's working, e.g.:
>>> Consumer:Volume_Decrement 1
>>> echo 1 >> /tmp/uhid_debug
>>
>> Absolutely no output. It's like the keys don't exist no matter what I
>> try. Are there ways to test for keyboard input at a lower level – like
>> in single user mode, before the USB driver potentially gets clogged by
>> other devices/processes?
>>
>>> On the other hand, I'm working on a new driver that would make all this
>>> usbhid* operations unnecessary, the keys would work natively.
>>
>> I'm looking forward to that! Please feel free to contact me for testing
>> diffs.
>>
>> Regards,
>> Erling
>>
>>>
>>> Regards,
>>> Anatoli
>>>
>>> On 2/10/19 09:54, Erling Westenvik wrote:
>>>> Hi,
>>>> I am unable to get the four multimedia keys (Play/Pause, Volume
>>>> Decrement/Increment, Mute) on my old'ish USB Microsoft Wired Keyboard
>>>> 600 to respond.
>>>> I have tried to do my homework by reading man pages, like
>>>> usbhidaction(1) and usbhidctl(1), and I've been looking at how-tos on
>>>> the net [1], but to no prevail and I've decided to reach out to misc@
>>>> for guidance. dmesg(1) below [2].
>>>>
>>>> This is what I have tried:
>>>>
>>>> 1. Identifying key strokes:
>>>>
>>>>    $ usbhidctl -l -f /dev/uhid0
>>>>    Consumer_Control.Play/Pause=1
>>>>    Consumer_Control.No_Event=1
>>>>    Consumer_Control.0xfe03=0
>>>>    Consumer_Control.0xfe04=0
>>>>    Consumer_Control.0xff05=0
>>>>    Consumer_Control.0xff02=0
>>>>    
>>>>    Consumer_Control.Unassigned=1
>>>>    Consumer_Control.No_Event=1
>>>>    Consumer_Control.0xfe03=0
>>>>    Consumer_Control.0xfe04=0
>>>>    Consumer_Control.0xff05=0
>>>>    Consumer_Control.0xff02=0
>>>>    
>>>>    [...identical output (except for name) for the other four keys...]
>>>>
>>>> 2. usbhidaction(1) configuration file:
>>>>
>>>>    $ cat ~/.usbhidaction.conf
>>>>    Consumer:Play/Pause 1 mixerctl outputs.master.mute=toggle
>>>>    Consumer:Volume_Decrement 1 mixerctl outputs.master=-8
>>>>    Consumer:Volume_Increment 1 mixerctl outputs.master=+8
>>>>    Consumer:Mute 1 mixerctl outputs.master.mute=toggle
>>>>
>>>> 3. Executing usbhidaction during xsession or from xterm..
>>>>
>>>>    $ usbhidaction -c ~/.usbhidaction.conf -f /dev/uhid0
>>>>
>>>>    ..exits without errors but keys are not responding.
>>>>
>>>> Bwt:
>>>> - I used to have a PS/2 keyboard with multi media keys and it was
>>>>   working well with the machine in question.
>>>> - The current USB keyboard is tested and fully functional on another
>>>>   machine running Windows 7.
>>>> - None of the multi media keys gets detected by xev(1).
>>>>
>>>>
>>>> Regards,
>>>>
>>>> Erling
>>>>
>>>> ---
>>>> [1] https://www.bsdhowto.ch/extrakeys.html
>>>> [2] $ dmesg
>>>> OpenBSD 6.6-beta (GENERIC.MP) #314: Mon Sep 16 19:13:24 MDT 2019
>>>>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>>>> real mem = 12867665920 (12271MB)
>>>> avail mem = 12464992256 (11887MB)
>>>> mpath0 at root
>>>> scsibus0 at mpath0: 256 targets
>>>> mainbus0 at root
>>>> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfcdf0 (57 entries)
>>>> bios0: vendor American Megatrends Inc. version "V1.15" date 03/04/2011
>>>> bios0: MICRO-STAR INTERNATIONAL CO.,LTD MS-7599
>>>> acpi0 at bios0: ACPI 1.0
>>>> acpi0: sleep states S0 S3 S4 S5
>>>> acpi0: tables DSDT FACP APIC MCFG OEMB SRAT HPET SSDT
>>>> acpi0: wakeup devices PCE2(S4) PCE3(S4) PCE4(S4) PCE5(S4) PCE6(S4) PCE7(S4) PCE9(S4) PCEA(S4) PCEB(S4) PCEC(S4) SBAZ(S4) P0PC(S4) UHC1(S4) UHC2(S4) UHC3(S4) USB4(S4) [...]
>>>> acpitimer0 at acpi0: 3579545 Hz, 32 bits
>>>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>>>> cpu0 at mainbus0: apid 0 (boot processor)
>>>> cpu0: AMD Athlon(tm) II X4 635 Processor, 2907.73 MHz, 10-05-03
>>>> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
>>>> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
>>>> cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
>>>> cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
>>>> cpu0: AMD erratum 721 detected and fixed
>>>> tsc_timecounter_init: TSC skew=0 observed drift=0
>>>> cpu0: smt 0, core 0, package 0
>>>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
>>>> cpu0: apic clock running at 200MHz
>>>> cpu0: mwait min=64, max=64, IBE
>>>> cpu1 at mainbus0: apid 1 (application processor)
>>>> TSC skew=3
>>>> cpu1: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
>>>> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
>>>> cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
>>>> cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
>>>> cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
>>>> cpu1: AMD erratum 721 detected and fixed
>>>> tsc_timecounter_init: TSC skew=3 observed drift=0
>>>> cpu1: smt 0, core 1, package 0
>>>> cpu2 at mainbus0: apid 2 (application processor)
>>>> TSC skew=4
>>>> cpu2: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
>>>> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
>>>> cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
>>>> cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
>>>> cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
>>>> cpu2: AMD erratum 721 detected and fixed
>>>> tsc_timecounter_init: TSC skew=4 observed drift=0
>>>> cpu2: smt 0, core 2, package 0
>>>> cpu3 at mainbus0: apid 3 (application processor)
>>>> TSC skew=-18
>>>> cpu3: AMD Athlon(tm) II X4 635 Processor, 2907.34 MHz, 10-05-03
>>>> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
>>>> cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
>>>> cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
>>>> cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
>>>> cpu3: AMD erratum 721 detected and fixed
>>>> tsc_timecounter_init: TSC skew=-18 observed drift=0
>>>> cpu3: smt 0, core 3, package 0
>>>> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
>>>> acpimcfg0 at acpi0
>>>> acpimcfg0: addr 0xe0000000, bus 0-255
>>>> acpihpet0 at acpi0: 14318180 Hz
>>>> acpiprt0 at acpi0: bus 0 (PCI0)
>>>> acpiprt1 at acpi0: bus 1 (PCE2)
>>>> acpiprt2 at acpi0: bus -1 (PCE3)
>>>> acpiprt3 at acpi0: bus -1 (PCE4)
>>>> acpiprt4 at acpi0: bus -1 (PCE5)
>>>> acpiprt5 at acpi0: bus 2 (PCE6)
>>>> acpiprt6 at acpi0: bus -1 (PCE7)
>>>> acpiprt7 at acpi0: bus -1 (PCE9)
>>>> acpiprt8 at acpi0: bus -1 (PCEA)
>>>> acpiprt9 at acpi0: bus -1 (PCEB)
>>>> acpiprt10 at acpi0: bus -1 (PCEC)
>>>> acpiprt11 at acpi0: bus 3 (P0PC)
>>>> acpicpu0 at acpi0: C1(@1 halt!), PSS
>>>> acpicpu1 at acpi0: C1(@1 halt!), PSS
>>>> acpicpu2 at acpi0: C1(@1 halt!), PSS
>>>> acpicpu3 at acpi0: C1(@1 halt!), PSS
>>>> acpipci0 at acpi0 PCI0: _OSC failed
>>>> acpicmos0 at acpi0
>>>> acpibtn0 at acpi0: PWRB
>>>> "PNP0C14" at acpi0 not configured
>>>> cpu0: 2907 MHz: speeds: 2900 2200 1700 800 MHz
>>>> pci0 at mainbus0 bus 0
>>>> 0:0:0: mem address conflict 0xe0000000/0x20000000
>>>> pchb0 at pci0 dev 0 function 0 "ATI RX780 Host" rev 0x00
>>>> ppb0 at pci0 dev 2 function 0 "ATI RD790 PCIE" rev 0x00
>>>> pci1 at ppb0 bus 1
>>>> radeondrm0 at pci1 dev 0 function 0 "ATI Radeon HD 5770" rev 0x00
>>>> drm0 at radeondrm0
>>>> radeondrm0: msi
>>>> azalia0 at pci1 dev 0 function 1 "ATI Radeon HD 5700 Audio" rev 0x00: msi
>>>> azalia0: no supported codecs
>>>> ppb1 at pci0 dev 6 function 0 "ATI RD790 PCIE" rev 0x00
>>>> pci2 at ppb1 bus 2
>>>> re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), msi, address 40:61:86:c6:16:49
>>>> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2
>>>> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 4 int 22, AHCI 1.1
>>>> ahci0: port 0: 1.5Gb/s
>>>> ahci0: port 1: 3.0Gb/s
>>>> scsibus1 at ahci0: 32 targets
>>>> sd0 at scsibus1 targ 0 lun 0: <ATA, ST3250410AS, 3.AA> t10.ATA_ST3250410AS_9RY1SS4X
>>>> sd0: 238475MB, 512 bytes/sector, 488397168 sectors
>>>> sd1 at scsibus1 targ 1 lun 0: <ATA, SAMSUNG HD403LJ, CT10> naa.50000f001b400584
>>>> sd1: 381554MB, 512 bytes/sector, 781422768 sectors
>>>> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 16, version 1.0, legacy support
>>>> ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 16, version 1.0, legacy support
>>>> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 17
>>>> usb0 at ehci0: USB revision 2.0
>>>> uhub0 at usb0 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
>>>> ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
>>>> ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
>>>> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 4 int 19
>>>> usb1 at ehci1: USB revision 2.0
>>>> uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
>>>> piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3c: SMI
>>>> iic0 at piixpm0
>>>> iic0: addr 0x28 01=00 02=00 03=00 04=00 05=00 06=00 07=03 3e=03 41=00 42=00 43=00 44=00 45=00 46=00 47=03 81=00 82=00 83=00 84=00 85=00 86=00 87=03 c1=00 c2=00 c3=00 c4=00 c5=00 c6=00 c7=03 words 00=ff00 01=0000 02=0000 03=00ff 04=00ff 05=00ff 06=00ff 07=ffff
>>>> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600
>>>> spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
>>>> spdmem2 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600
>>>> spdmem3 at iic0 addr 0x53: 2GB DDR3 SDRAM PC3-10600
>>>> pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
>>>> atapiscsi0 at pciide0 channel 1 drive 0
>>>> scsibus2 at atapiscsi0: 2 targets
>>>> cd0 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVDRAM GH40N, NV02> removable
>>>> cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
>>>> azalia1 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 4 int 16
>>>> azalia1: codecs: Realtek ALC888
>>>> audio0 at azalia1
>>>> pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
>>>> ppb2 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
>>>> pci3 at ppb2 bus 3
>>>> ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 4 int 18, version 1.0, legacy support
>>>> pchb1 at pci0 dev 24 function 0 "AMD AMD64 10h HyperTransport" rev 0x00
>>>> pchb2 at pci0 dev 24 function 1 "AMD AMD64 10h Address Map" rev 0x00
>>>> pchb3 at pci0 dev 24 function 2 "AMD AMD64 10h DRAM Cfg" rev 0x00
>>>> km0 at pci0 dev 24 function 3 "AMD AMD64 10h Misc Cfg" rev 0x00
>>>> pchb4 at pci0 dev 24 function 4 "AMD AMD64 10h Link Cfg" rev 0x00
>>>> usb2 at ohci0: USB revision 1.0
>>>> uhub2 at usb2 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
>>>> usb3 at ohci1: USB revision 1.0
>>>> uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
>>>> usb4 at ohci2: USB revision 1.0
>>>> uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
>>>> usb5 at ohci3: USB revision 1.0
>>>> uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
>>>> isa0 at pcib0
>>>> isadma0 at isa0
>>>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>>>> com0: probed fifo depth: 15 bytes
>>>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>>>> pckbd0 at pckbc0 (kbd slot)
>>>> wskbd0 at pckbd0: console keyboard
>>>> pcppi0 at isa0 port 0x61
>>>> spkr0 at pcppi0
>>>> usb6 at ohci4: USB revision 1.0
>>>> uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
>>>> vmm0 at mainbus0: SVM/RVI
>>>> uhidev0 at uhub3 port 3 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/27.20 addr 2
>>>> uhidev0: iclass 3/1
>>>> ums0 at uhidev0: 8 buttons, Z and W dir
>>>> wsmouse0 at ums0 mux 0
>>>> uhidev1 at uhub4 port 3 configuration 1 interface 0 "Microsoft Wired Keyboard 600" rev 1.10/1.10 addr 2
>>>> uhidev1: iclass 3/1
>>>> ukbd0 at uhidev1: 8 variable keys, 6 key codes
>>>> wskbd1 at ukbd0 mux 1
>>>> uhidev2 at uhub4 port 3 configuration 1 interface 1 "Microsoft Wired Keyboard 600" rev 1.10/1.10 addr 2
>>>> uhidev2: iclass 3/0, 3 report ids
>>>> uhid0 at uhidev2 reportid 1: input=7, output=0, feature=0
>>>> uhid1 at uhidev2 reportid 3: input=1, output=0, feature=0
>>>> vscsi0 at root
>>>> scsibus3 at vscsi0: 256 targets
>>>> softraid0 at root
>>>> scsibus4 at softraid0: 256 targets
>>>> sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR RAID 1, 006>
>>>> sd2: 238417MB, 512 bytes/sector, 488279018 sectors
>>>> root on sd2a (b14f96613fb578e5.a) swap on sd2b dump on sd2b
>>>> initializing kernel modesetting (JUNIPER 0x1002:0x68B8 0x1682:0x2990 0x00).
>>>> radeondrm0: 1920x1080, 32bpp
>>>> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
>>>> wskbd1: connecting to wsdisplay0
>>>> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>>>> sd3 at scsibus4 targ 2 lun 0: <OPENBSD, SR CRYPTO, 006>
>>>> sd3: 237382MB, 512 bytes/sector, 486158505 sectors
>