MiniPC COOFUN C-N34 Apollo lake. external SD card support does not work.

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

MiniPC COOFUN C-N34 Apollo lake. external SD card support does not work.

victor
Hello all,

I've installed Release version OpenBSD 6.7 on a MiniPC COOFUN C-N34. It
is a fan-less 4 core, 4GB RAM, Apollo Lake machine. See dmesg output bellow.

This MiniPC has an internal 64GB eMMC, which works fine with 6.7
release. The OS is installed here. It is the only OS installed and uses
the entire disk.

This MiniPC also have an slot for an external SD card. In my case there
is a 128GB SD XC inserted there.

I get the this message at startup: 'sdmmc0: can't enable card' and the
disk is not recognized by 'sysctl hw.disknames', which only shows de
internal eMMC drive, sd0.

This happens with a fresh, default installation of the 6.7 release,
after fw_update and syspatch. No configuration files has been edited.
Default configuration for everything.

I get the same behavior with an old 2GB SD Card (not XC)

Does anybody know how to enable the external SD card?
Thanks in advance for any help you can give me.
Victor

dmesg output here:

OpenBSD 6.7 (RAMDISK_CD) #177: Thu May  7 11:19:02 MDT 2020
[hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 4099817472 (3909MB)
avail mem = 3971538944 (3787MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x79d71000 (55 entries)
bios0: vendor American Megatrends Inc. version "N3402" date 10/21/2019
bios0: BESSTAR (HK) LIMITED C-N34
acpi0 at bios0: ACPI 6.0
acpi0: tables DSDT FACP FPDT FIDT MSDM MCFG DBG2 DBGP HPET LPIT APIC
NPKT PRAM WSMT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT UEFI BGRT BERT WDAT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.79 MHz, 06-5c-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiec0 at acpi0
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
"PNP0A08" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"INT34C1" at acpi0 not configured
"NXP1001" at acpi0 not configured
"IMPJ0003" at acpi0 not configured
"BCM4752" at acpi0 not configured
"ID9001" at acpi0 not configured
acpicmos0 at acpi0
aplgpio0 at acpi0: GPO0 uid 1 addr 0xd0c50000/0x76c irq 14, 78 pins
aplgpio1 at acpi0: GPO1 uid 2 addr 0xd0c40000/0x764 irq 14, 77 pins
aplgpio2 at acpi0: GPO2 uid 3 addr 0xd0c70000/0x674 irq 14, 47 pins
aplgpio3 at acpi0: GPO3 uid 4 addr 0xd0c00000/0x654 irq 14, 43 pins
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"INT3400" at acpi0 not configured
"INT3406" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3407" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Apollo Lake Host" rev 0x0b
vendor "Intel", unknown product 0x5a8c (class DASP subclass
miscellaneous, rev 0x0b) at pci0 dev 0 function 1 not configured
"Intel HD Graphics 500" rev 0x0b at pci0 dev 2 function 0 not configured
"Intel Apollo Lake HD Audio" rev 0x0b at pci0 dev 14 function 0 not
configured
"Intel Apollo Lake TXE" rev 0x0b at pci0 dev 15 function 0 not configured
ahci0 at pci0 dev 18 function 0 "Intel Apollo Lake AHCI" rev 0x0b: msi,
AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: PHY offline on port 1
scsibus0 at ahci0: 32 targets
ppb0 at pci0 dev 19 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H
(0x5400), msi, address 00:e0:4c:04:00:75
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 20 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev
0x79, msi
xhci0 at pci0 dev 21 function 0 "Intel Apollo Lake xHCI" rev 0x0b: msi,
xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
dwiic0 at pci0 dev 22 function 0 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 27
iic0 at dwiic0
dwiic1 at pci0 dev 22 function 1 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 28
iic1 at dwiic1
"INT34C1" at iic1 addr 0x38 not configured
"NXP1001" at iic1 addr 0x29 not configured
dwiic2 at pci0 dev 22 function 2 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 29
iic2 at dwiic2
dwiic3 at pci0 dev 22 function 3 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 30
iic3 at dwiic3
dwiic4 at pci0 dev 23 function 0 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 31
iic4 at dwiic4
dwiic5 at pci0 dev 23 function 1 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 32
iic5 at dwiic5
dwiic6 at pci0 dev 23 function 2 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 33
iic6 at dwiic6
dwiic7 at pci0 dev 23 function 3 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 34
iic7 at dwiic7
"IMPJ0003" at iic7 addr 0x6e not configured
"Intel Apollo Lake HSUART" rev 0x0b at pci0 dev 24 function 0 not configured
"Intel Apollo Lake HSUART" rev 0x0b at pci0 dev 24 function 1 not configured
"Intel Apollo Lake HSUART" rev 0x0b at pci0 dev 24 function 2 not configured
"Intel Apollo Lake HSUART" rev 0x0b at pci0 dev 24 function 3 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 0 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 1 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 2 not configured
"Intel Apollo Lake PWM" rev 0x0b at pci0 dev 26 function 0 not configured
sdhc0 at pci0 dev 27 function 0 "Intel Apollo Lake SD/MMC" rev 0x0b:
apic 1 int 3
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
sdhc1 at pci0 dev 28 function 0 "Intel Apollo Lake eMMC" rev 0x0b: apic
1 int 39
sdhc1: SDHC 3.0, 200 MHz base clock
sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, dma
"Intel Apollo Lake LPC" rev 0x0b at pci0 dev 31 function 0 not configured
"Intel Apollo Lake SMBus" rev 0x0b at pci0 dev 31 function 1 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
efifb0 at mainbus0: 1920x1080, 32bpp
wsdisplay0 at efifb0 mux 1: console (std, vt100 emulation), using wskbd0
scsibus1 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Sandisk, DA4064, 0000> removable
sd0: 59640MB, 512 bytes/sector, 122142720 sectors
sdmmc0: can't enable card
uhub0: device problem, disabling port 2
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 6 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev1: iclass 3/1, 8 report ids
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
uhid at uhidev1 reportid 4 not configured
uhid at uhidev1 reportid 8 not configured
uhidev2 at uhub0 port 6 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid at uhidev2 reportid 16 not configured
uhid at uhidev2 reportid 17 not configured
uhid at uhidev2 reportid 32 not configured
uhid at uhidev2 reportid 33 not configured
umass0 at uhub0 port 7 configuration 1 interface 0 "Kingston
DataTraveler 2.0" rev 2.00/2.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00>
removable serial.09511603A921257D026A
sd1: 7692MB, 512 bytes/sector, 15753216 sectors
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
WARNING: CHECK AND RESET THE DATE!
iwm0: could not read firmware iwm-7265-17 (error 2)
iwm0: failed to load init firmware
syncing disks...
OpenBSD 6.7 (GENERIC.MP) #182: Thu May  7 11:11:58 MDT 2020
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4099817472 (3909MB)
avail mem = 3962941440 (3779MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x79d71000 (55 entries)
bios0: vendor American Megatrends Inc. version "N3402" date 10/21/2019
bios0: BESSTAR (HK) LIMITED C-N34
acpi0 at bios0: ACPI 6.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP FPDT FIDT MSDM MCFG DBG2 DBGP HPET LPIT APIC
NPKT PRAM WSMT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT UEFI BGRT WDAT
acpi0: wakeup devices LID0(S3) HDAS(S3) XHC_(S4) XDCI(S4) BRCM(S0)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
RP05(S4) PXSX(S4) RP06(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.79 MHz, 06-5c-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.48 MHz, 06-5c-09
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.48 MHz, 06-5c-09
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.48 MHz, 06-5c-09
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiec0 at acpi0
acpi0: GPE 0x2c already enabled
acpicpu0 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu1 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu2 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu3 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 100 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
"INT34C1" at acpi0 not configured
"NXP1001" at acpi0 not configured
"IMPJ0003" at acpi0 not configured
"BCM4752" at acpi0 not configured
"ID9001" at acpi0 not configured
acpicmos0 at acpi0
aplgpio0 at acpi0: GPO0 uid 1 addr 0xd0c50000/0x76c irq 14, 78 pins
aplgpio1 at acpi0: GPO1 uid 2 addr 0xd0c40000/0x764 irq 14, 77 pins
aplgpio2 at acpi0: GPO2 uid 3 addr 0xd0c70000/0x674 irq 14, 47 pins
aplgpio3 at acpi0: GPO3 uid 4 addr 0xd0c00000/0x654 irq 14, 43 pins
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"INT3400" at acpi0 not configured
"INT3406" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3407" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1097 MHz: speeds: 2200, 2100, 2000, 1900, 1800,
1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Apollo Lake Host" rev 0x0b
vendor "Intel", unknown product 0x5a8c (class DASP subclass
miscellaneous, rev 0x0b) at pci0 dev 0 function 1 not configured
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 500" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi, BROXTON, gen 9
azalia0 at pci0 dev 14 function 0 "Intel Apollo Lake HD Audio" rev 0x0b: msi
azalia0: codecs: Realtek ALC269, Intel/0x280a, using Realtek ALC269
audio0 at azalia0
"Intel Apollo Lake TXE" rev 0x0b at pci0 dev 15 function 0 not configured
ahci0 at pci0 dev 18 function 0 "Intel Apollo Lake AHCI" rev 0x0b: msi,
AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: PHY offline on port 1
scsibus1 at ahci0: 32 targets
ppb0 at pci0 dev 19 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H
(0x5400), msi, address 00:e0:4c:04:00:75
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 20 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev
0x79, msi
xhci0 at pci0 dev 21 function 0 "Intel Apollo Lake xHCI" rev 0x0b: msi,
xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
dwiic0 at pci0 dev 22 function 0 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 27
iic0 at dwiic0
dwiic1 at pci0 dev 22 function 1 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 28
iic1 at dwiic1
"INT34C1" at iic1 addr 0x38 not configured
"NXP1001" at iic1 addr 0x29 not configured
dwiic2 at pci0 dev 22 function 2 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 29
iic2 at dwiic2
dwiic3 at pci0 dev 22 function 3 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 30
iic3 at dwiic3
dwiic4 at pci0 dev 23 function 0 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 31
iic4 at dwiic4
dwiic5 at pci0 dev 23 function 1 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 32
iic5 at dwiic5
dwiic6 at pci0 dev 23 function 2 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 33
iic6 at dwiic6
dwiic7 at pci0 dev 23 function 3 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 34
iic7 at dwiic7
"IMPJ0003" at iic7 addr 0x6e not configured
com4 at pci0 dev 24 function 0 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
com5 at pci0 dev 24 function 1 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
com6 at pci0 dev 24 function 2 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
com7 at pci0 dev 24 function 3 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 0 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 1 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 2 not configured
"Intel Apollo Lake PWM" rev 0x0b at pci0 dev 26 function 0 not configured
sdhc0 at pci0 dev 27 function 0 "Intel Apollo Lake SD/MMC" rev 0x0b:
apic 1 int 3
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
sdhc1 at pci0 dev 28 function 0 "Intel Apollo Lake eMMC" rev 0x0b: apic
1 int 39
sdhc1: SDHC 3.0, 200 MHz base clock
sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, dma
pcib0 at pci0 dev 31 function 0 "Intel Apollo Lake LPC" rev 0x0b
ichiic0 at pci0 dev 31 function 1 "Intel Apollo Lake SMBus" rev 0x0b:
polling
iic8 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
scsibus2 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Sandisk, DA4064, 0000> removable
sd0: 59640MB, 512 bytes/sector, 122142720 sectors
sdmmc0: can't enable card
uhub0: device problem, disabling port 2
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 6 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub0 port 6 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
umass0 at uhub0 port 7 configuration 1 interface 0 "Kingston
DataTraveler 2.0" rev 2.00/2.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00>
removable serial.09511603A921257D026A
sd1: 7692MB, 512 bytes/sector, 15753216 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (171ba141f5b2971d.a) swap on sd0b dump on sd0b
drm:pid30344:csr_load_work_fn *NOTICE* Failed to load DMC firmware
i915/bxt_dmc_ver1_07.bin. Disabling runtime power management.
drm:pid30344:csr_load_work_fn *NOTICE* DMC firmware homepage:
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915inteldrm0: 
1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: could not read firmware iwm-7265-17 (error 2)
iwm0: failed to load init firmware
syncing disks... done
rebooting...
OpenBSD 6.7 (GENERIC.MP) #2: Thu Jun  4 09:55:08 MDT 2020
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4099817472 (3909MB)
avail mem = 3962949632 (3779MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x79d71000 (55 entries)
bios0: vendor American Megatrends Inc. version "N3402" date 10/21/2019
bios0: BESSTAR (HK) LIMITED C-N34
acpi0 at bios0: ACPI 6.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP FPDT FIDT MSDM MCFG DBG2 DBGP HPET LPIT APIC
NPKT PRAM WSMT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT UEFI BGRT WDAT
acpi0: wakeup devices LID0(S3) HDAS(S3) XHC_(S4) XDCI(S4) BRCM(S0)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
RP05(S4) PXSX(S4) RP06(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.84 MHz, 06-5c-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.48 MHz, 06-5c-09
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.50 MHz, 06-5c-09
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.49 MHz, 06-5c-09
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiec0 at acpi0
acpi0: GPE 0x2c already enabled
acpicpu0 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu1 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu2 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu3 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 100 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
"INT34C1" at acpi0 not configured
"NXP1001" at acpi0 not configured
"IMPJ0003" at acpi0 not configured
"BCM4752" at acpi0 not configured
"ID9001" at acpi0 not configured
acpicmos0 at acpi0
aplgpio0 at acpi0: GPO0 uid 1 addr 0xd0c50000/0x76c irq 14, 78 pins
aplgpio1 at acpi0: GPO1 uid 2 addr 0xd0c40000/0x764 irq 14, 77 pins
aplgpio2 at acpi0: GPO2 uid 3 addr 0xd0c70000/0x674 irq 14, 47 pins
aplgpio3 at acpi0: GPO3 uid 4 addr 0xd0c00000/0x654 irq 14, 43 pins
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"INT3400" at acpi0 not configured
"INT3406" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3407" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1097 MHz: speeds: 2200, 2100, 2000, 1900, 1800,
1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Apollo Lake Host" rev 0x0b
vendor "Intel", unknown product 0x5a8c (class DASP subclass
miscellaneous, rev 0x0b) at pci0 dev 0 function 1 not configured
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 500" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi, BROXTON, gen 9
azalia0 at pci0 dev 14 function 0 "Intel Apollo Lake HD Audio" rev 0x0b: msi
azalia0: codecs: Realtek ALC269, Intel/0x280a, using Realtek ALC269
audio0 at azalia0
"Intel Apollo Lake TXE" rev 0x0b at pci0 dev 15 function 0 not configured
ahci0 at pci0 dev 18 function 0 "Intel Apollo Lake AHCI" rev 0x0b: msi,
AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: PHY offline on port 1
scsibus1 at ahci0: 32 targets
ppb0 at pci0 dev 19 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H
(0x5400), msi, address 00:e0:4c:04:00:75
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 20 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev
0x79, msi
xhci0 at pci0 dev 21 function 0 "Intel Apollo Lake xHCI" rev 0x0b: msi,
xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
dwiic0 at pci0 dev 22 function 0 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 27
iic0 at dwiic0
dwiic1 at pci0 dev 22 function 1 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 28
iic1 at dwiic1
"INT34C1" at iic1 addr 0x38 not configured
"NXP1001" at iic1 addr 0x29 not configured
dwiic2 at pci0 dev 22 function 2 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 29
iic2 at dwiic2
dwiic3 at pci0 dev 22 function 3 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 30
iic3 at dwiic3
dwiic4 at pci0 dev 23 function 0 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 31
iic4 at dwiic4
dwiic5 at pci0 dev 23 function 1 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 32
iic5 at dwiic5
dwiic6 at pci0 dev 23 function 2 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 33
iic6 at dwiic6
dwiic7 at pci0 dev 23 function 3 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 34
iic7 at dwiic7
"IMPJ0003" at iic7 addr 0x6e not configured
com4 at pci0 dev 24 function 0 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
com5 at pci0 dev 24 function 1 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
com6 at pci0 dev 24 function 2 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
com7 at pci0 dev 24 function 3 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 0 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 1 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 2 not configured
"Intel Apollo Lake PWM" rev 0x0b at pci0 dev 26 function 0 not configured
sdhc0 at pci0 dev 27 function 0 "Intel Apollo Lake SD/MMC" rev 0x0b:
apic 1 int 3
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
sdhc1 at pci0 dev 28 function 0 "Intel Apollo Lake eMMC" rev 0x0b: apic
1 int 39
sdhc1: SDHC 3.0, 200 MHz base clock
sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, dma
pcib0 at pci0 dev 31 function 0 "Intel Apollo Lake LPC" rev 0x0b
ichiic0 at pci0 dev 31 function 1 "Intel Apollo Lake SMBus" rev 0x0b:
polling
iic8 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
scsibus2 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Sandisk, DA4064, 0000> removable
sd0: 59640MB, 512 bytes/sector, 122142720 sectors
sdmmc0: can't enable card
uhub0: device problem, disabling port 2
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 6 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub0 port 6 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
umass0 at uhub0 port 7 configuration 1 interface 0 "Kingston
DataTraveler 2.0" rev 2.00/2.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <Kingston, DataTraveler 2.0, 1.00>
removable serial.09511603A921257D026A
sd1: 7692MB, 512 bytes/sector, 15753216 sectors
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (171ba141f5b2971d.a) swap on sd0b dump on sd0b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x210, fw ver 17.3216344376.0, address 50:eb:71:3f:15:51
sd1 detached
scsibus3 detached
umass0 detached
syncing disks... done
rebooting...
OpenBSD 6.7 (GENERIC.MP) #2: Thu Jun  4 09:55:08 MDT 2020
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4099817472 (3909MB)
avail mem = 3962920960 (3779MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x79d71000 (55 entries)
bios0: vendor American Megatrends Inc. version "N3402" date 10/21/2019
bios0: BESSTAR (HK) LIMITED C-N34
acpi0 at bios0: ACPI 6.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP FPDT FIDT MSDM MCFG DBG2 DBGP HPET LPIT APIC
NPKT PRAM WSMT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT UEFI BGRT WDAT
acpi0: wakeup devices LID0(S3) HDAS(S3) XHC_(S4) XDCI(S4) BRCM(S0)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
RP05(S4) PXSX(S4) RP06(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.97 MHz, 06-5c-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.48 MHz, 06-5c-09
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.50 MHz, 06-5c-09
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.48 MHz, 06-5c-09
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiec0 at acpi0
acpi0: GPE 0x2c already enabled
acpicpu0 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu1 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu2 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu3 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 100 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
"INT34C1" at acpi0 not configured
"NXP1001" at acpi0 not configured
"IMPJ0003" at acpi0 not configured
"BCM4752" at acpi0 not configured
"ID9001" at acpi0 not configured
acpicmos0 at acpi0
aplgpio0 at acpi0: GPO0 uid 1 addr 0xd0c50000/0x76c irq 14, 78 pins
aplgpio1 at acpi0: GPO1 uid 2 addr 0xd0c40000/0x764 irq 14, 77 pins
aplgpio2 at acpi0: GPO2 uid 3 addr 0xd0c70000/0x674 irq 14, 47 pins
aplgpio3 at acpi0: GPO3 uid 4 addr 0xd0c00000/0x654 irq 14, 43 pins
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"INT3400" at acpi0 not configured
"INT3406" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3407" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1097 MHz: speeds: 2200, 2100, 2000, 1900, 1800,
1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Apollo Lake Host" rev 0x0b
vendor "Intel", unknown product 0x5a8c (class DASP subclass
miscellaneous, rev 0x0b) at pci0 dev 0 function 1 not configured
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 500" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi, BROXTON, gen 9
azalia0 at pci0 dev 14 function 0 "Intel Apollo Lake HD Audio" rev 0x0b: msi
azalia0: codecs: Realtek ALC269, Intel/0x280a, using Realtek ALC269
audio0 at azalia0
"Intel Apollo Lake TXE" rev 0x0b at pci0 dev 15 function 0 not configured
ahci0 at pci0 dev 18 function 0 "Intel Apollo Lake AHCI" rev 0x0b: msi,
AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: PHY offline on port 1
scsibus1 at ahci0: 32 targets
ppb0 at pci0 dev 19 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H
(0x5400), msi, address 00:e0:4c:04:00:75
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 20 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev
0x79, msi
xhci0 at pci0 dev 21 function 0 "Intel Apollo Lake xHCI" rev 0x0b: msi,
xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
dwiic0 at pci0 dev 22 function 0 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 27
iic0 at dwiic0
dwiic1 at pci0 dev 22 function 1 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 28
iic1 at dwiic1
"INT34C1" at iic1 addr 0x38 not configured
"NXP1001" at iic1 addr 0x29 not configured
dwiic2 at pci0 dev 22 function 2 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 29
iic2 at dwiic2
dwiic3 at pci0 dev 22 function 3 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 30
iic3 at dwiic3
dwiic4 at pci0 dev 23 function 0 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 31
iic4 at dwiic4
dwiic5 at pci0 dev 23 function 1 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 32
iic5 at dwiic5
dwiic6 at pci0 dev 23 function 2 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 33
iic6 at dwiic6
dwiic7 at pci0 dev 23 function 3 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 34
iic7 at dwiic7
"IMPJ0003" at iic7 addr 0x6e not configured
com4 at pci0 dev 24 function 0 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
com5 at pci0 dev 24 function 1 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
com6 at pci0 dev 24 function 2 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
com7 at pci0 dev 24 function 3 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 0 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 1 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 2 not configured
"Intel Apollo Lake PWM" rev 0x0b at pci0 dev 26 function 0 not configured
sdhc0 at pci0 dev 27 function 0 "Intel Apollo Lake SD/MMC" rev 0x0b:
apic 1 int 3
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
sdhc1 at pci0 dev 28 function 0 "Intel Apollo Lake eMMC" rev 0x0b: apic
1 int 39
sdhc1: SDHC 3.0, 200 MHz base clock
sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, dma
pcib0 at pci0 dev 31 function 0 "Intel Apollo Lake LPC" rev 0x0b
ichiic0 at pci0 dev 31 function 1 "Intel Apollo Lake SMBus" rev 0x0b:
polling
iic8 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
scsibus2 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Sandisk, DA4064, 0000> removable
sd0: 59640MB, 512 bytes/sector, 122142720 sectors
sdmmc0: can't enable card
uhub0: device problem, disabling port 2
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 6 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub0 port 6 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (171ba141f5b2971d.a) swap on sd0b dump on sd0b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x210, fw ver 17.3216344376.0, address 50:eb:71:3f:15:51
syncing disks... done
rebooting...
OpenBSD 6.7 (GENERIC.MP) #2: Thu Jun  4 09:55:08 MDT 2020
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4099817472 (3909MB)
avail mem = 3962945536 (3779MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x79d71000 (55 entries)
bios0: vendor American Megatrends Inc. version "N3402" date 10/21/2019
bios0: BESSTAR (HK) LIMITED C-N34
acpi0 at bios0: ACPI 6.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP FPDT FIDT MSDM MCFG DBG2 DBGP HPET LPIT APIC
NPKT PRAM WSMT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT UEFI BGRT WDAT
acpi0: wakeup devices LID0(S3) HDAS(S3) XHC_(S4) XDCI(S4) BRCM(S0)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
RP05(S4) PXSX(S4) RP06(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 19200000 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.84 MHz, 06-5c-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 1MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 19MHz
cpu0: mwait min=64, max=64, C-substates=0.2.0.2.4.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.47 MHz, 06-5c-09
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 1MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.49 MHz, 06-5c-09
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 1MB 64b/line 16-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Celeron(R) CPU N3450 @ 1.10GHz, 1097.48 MHz, 06-5c-09
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,MD_CLEAR,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 1MB 64b/line 16-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 120 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiec0 at acpi0
acpi0: GPE 0x2c already enabled
acpicpu0 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu1 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu2 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpicpu3 at acpi0: C3(10@150 mwait.1@0x60), C2(10@50 mwait.1@0x21),
C1(1000@1 mwait.1@0x1), PSS
acpipwrres0 at acpi0: FN00, resource for FAN0
acpitz0 at acpi0: critical temperature is 100 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
"INT34C1" at acpi0 not configured
"NXP1001" at acpi0 not configured
"IMPJ0003" at acpi0 not configured
"BCM4752" at acpi0 not configured
"ID9001" at acpi0 not configured
acpicmos0 at acpi0
aplgpio0 at acpi0: GPO0 uid 1 addr 0xd0c50000/0x76c irq 14, 78 pins
aplgpio1 at acpi0: GPO1 uid 2 addr 0xd0c40000/0x764 irq 14, 77 pins
aplgpio2 at acpi0: GPO2 uid 3 addr 0xd0c70000/0x674 irq 14, 47 pins
aplgpio3 at acpi0: GPO3 uid 4 addr 0xd0c00000/0x654 irq 14, 43 pins
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"INT3400" at acpi0 not configured
"INT3406" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3407" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 1097 MHz: speeds: 2200, 2100, 2000, 1900, 1800,
1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Apollo Lake Host" rev 0x0b
vendor "Intel", unknown product 0x5a8c (class DASP subclass
miscellaneous, rev 0x0b) at pci0 dev 0 function 1 not configured
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 500" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi, BROXTON, gen 9
azalia0 at pci0 dev 14 function 0 "Intel Apollo Lake HD Audio" rev 0x0b: msi
azalia0: codecs: Realtek ALC269, Intel/0x280a, using Realtek ALC269
audio0 at azalia0
"Intel Apollo Lake TXE" rev 0x0b at pci0 dev 15 function 0 not configured
ahci0 at pci0 dev 18 function 0 "Intel Apollo Lake AHCI" rev 0x0b: msi,
AHCI 1.3.1
ahci0: PHY offline on port 0
ahci0: PHY offline on port 1
scsibus1 at ahci0: 32 targets
ppb0 at pci0 dev 19 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x15: RTL8168H/8111H
(0x5400), msi, address 00:e0:4c:04:00:75
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 20 function 0 "Intel Apollo Lake PCIE" rev 0xfb: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev
0x79, msi
xhci0 at pci0 dev 21 function 0 "Intel Apollo Lake xHCI" rev 0x0b: msi,
xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
dwiic0 at pci0 dev 22 function 0 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 27
iic0 at dwiic0
dwiic1 at pci0 dev 22 function 1 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 28
iic1 at dwiic1
"INT34C1" at iic1 addr 0x38 not configured
"NXP1001" at iic1 addr 0x29 not configured
dwiic2 at pci0 dev 22 function 2 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 29
iic2 at dwiic2
dwiic3 at pci0 dev 22 function 3 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 30
iic3 at dwiic3
dwiic4 at pci0 dev 23 function 0 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 31
iic4 at dwiic4
dwiic5 at pci0 dev 23 function 1 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 32
iic5 at dwiic5
dwiic6 at pci0 dev 23 function 2 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 33
iic6 at dwiic6
dwiic7 at pci0 dev 23 function 3 "Intel Apollo Lake I2C" rev 0x0b: apic
1 int 34
iic7 at dwiic7
"IMPJ0003" at iic7 addr 0x6e not configured
com4 at pci0 dev 24 function 0 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
com5 at pci0 dev 24 function 1 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
com6 at pci0 dev 24 function 2 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
com7 at pci0 dev 24 function 3 "Intel Apollo Lake HSUART" rev 0x0b:
ns16550, no working fifo
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 0 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 1 not configured
"Intel Apollo Lake SPI" rev 0x0b at pci0 dev 25 function 2 not configured
"Intel Apollo Lake PWM" rev 0x0b at pci0 dev 26 function 0 not configured
sdhc0 at pci0 dev 27 function 0 "Intel Apollo Lake SD/MMC" rev 0x0b:
apic 1 int 3
sdhc0: SDHC 3.0, 200 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
sdhc1 at pci0 dev 28 function 0 "Intel Apollo Lake eMMC" rev 0x0b: apic
1 int 39
sdhc1: SDHC 3.0, 200 MHz base clock
sdmmc1 at sdhc1: 8-bit, sd high-speed, mmc high-speed, dma
pcib0 at pci0 dev 31 function 0 "Intel Apollo Lake LPC" rev 0x0b
ichiic0 at pci0 dev 31 function 1 "Intel Apollo Lake SMBus" rev 0x0b:
polling
iic8 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
scsibus2 at sdmmc1: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Sandisk, DA4064, 0000> removable
sd0: 59640MB, 512 bytes/sector, 122142720 sectors
sdmmc0: can't enable card
uhub0: device problem, disabling port 2
uhidev0 at uhub0 port 6 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 6 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub0 port 6 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/24.01 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (171ba141f5b2971d.a) swap on sd0b dump on sd0b
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x210, fw ver 17.3216344376.0, address 50:eb:71:3f:15:51
hw.sensors.cpu0.temp0=60.00 degC
hw.sensors.acpitz0.temp0=60.00 degC (zone temperature)
hw.sensors.acpiac0.indicator0=On (power supply)
hw.sensors.acpibtn0.indicator0=On (lid open)