Lenovo U350 panic when starting X

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|

Lenovo U350 panic when starting X

Raimo Niskanen-2
I just freed a Lenovo U350 IdeaPad from Windows 10 Home and installed
OpenBSD 6.5 on it (the installer gets better and better - now I installed
the sets via https and cdn.openbsd.org; really slick!), and when starting X
it panicked.

During the first installation I selected to start xenodm and at firstboot
it panicked right after firmware installation during kernel relinking.
Both firmware files and kernel appeared to be damaged after reboot and fsck.

So this is after a second installation where I selected to not start
xenodm, which allowed me to update firmware, syspatch reboot again
and wait for quiescent filesystem before starting xenodm, and then;
it panicked.

I hope it is simply not that machdep.allowaperture=0; if that was needed
Xorg should just refuse to start, right?

Here are screenshots from the panic, ddb> trace and ps output:

  https://mailfence.com/pub/docs/raimo_niskanen/web/panic.jpg
  https://mailfence.com/pub/docs/raimo_niskanen/web/trace-0.jpg
  https://mailfence.com/pub/docs/raimo_niskanen/web/trace-1.jpg
  https://mailfence.com/pub/docs/raimo_niskanen/web/ps-1.jpg
  https://mailfence.com/pub/docs/raimo_niskanen/web/ps-2.jpg
  https://mailfence.com/pub/docs/raimo_niskanen/web/ps-3.jpg

And here is the dmesg:

OpenBSD 6.5 (GENERIC.MP) #1: Mon May 27 18:27:59 CEST 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4105912320 (3915MB)
avail mem = 3971837952 (3787MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe3810 (24 entries)
bios0: vendor LENOVO version "1CCN24WW" date 11/10/2009
bios0: LENOVO IdeaPad U350
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET MCFG APIC BOOT SLIC SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1296.97 MHz, 06-17-0a
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
cpu0: apic clock running at 247MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1607.97 MHz, 06-17-0a
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
cpu1: 3MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 9 (P0P1)
acpiprt3 at acpi0: bus 2 (RP01)
acpiprt4 at acpi0: bus 3 (RP02)
acpiprt5 at acpi0: bus 8 (RP06)
acpiec0 at acpi0
acpicpu0 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 98 degC
acpipci0 at acpi0 PCI0: _OSC failed
acpicmos0 at acpi0
"SYN1031" at acpi0 not configured
"VPC2004" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "L901" serial   type LION oem "CPT-A28"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
acpials0 at acpi0: ALSD
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD03
cpu0: Enhanced SpeedStep 1296 MHz: speeds: 1300, 1200, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant/0x5066, Intel/0x2802, using Conexant/0x5066
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:24:d6:00:bb:7a
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
pci4 at ppb3 bus 6
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
pci5 at ppb4 bus 7
ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi
pci6 at ppb5 bus 8
bge0 at pci6 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1 (0x57780001): msi, address 00:26:9e:6f:23:48
brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci7 at ppb6 bus 9
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
ahci0: port 0: 3.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3200BEVT-2, 11.0> SCSI3 0/direct fixed naa.50014ee0ac4fd90e
sd0: 305245MB, 512 bytes/sector, 625142448 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xa40000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX (using slow L1TF mitigation)
uvideo0 at uhub0 port 5 configuration 1 interface 0 "BISON Corporation Lenovo EasyCamera" rev 2.00/3.17 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 281599MB, 512 bytes/sector, 576716655 sectors
root on sd1a (ade017f291cda44d.a) swap on sd1b dump on sd1b
--

/ Raimo Niskanen, Erlang/OTP, Ericsson AB

Reply | Threaded
Open this post in threaded view
|

Re: Lenovo U350 panic when starting X

Raimo Niskanen-2
On Thu, Jul 04, 2019 at 09:13:22AM +0200, Raimo Niskanen wrote:

> I just freed a Lenovo U350 IdeaPad from Windows 10 Home and installed
> OpenBSD 6.5 on it (the installer gets better and better - now I installed
> the sets via https and cdn.openbsd.org; really slick!), and when starting X
> it panicked.
>
> During the first installation I selected to start xenodm and at firstboot
> it panicked right after firmware installation during kernel relinking.
> Both firmware files and kernel appeared to be damaged after reboot and fsck.
>
> So this is after a second installation where I selected to not start
> xenodm, which allowed me to update firmware, syspatch reboot again
> and wait for quiescent filesystem before starting xenodm, and then;
> it panicked.
>
> I hope it is simply not that machdep.allowaperture=0; if that was needed
> Xorg should just refuse to start, right?

It was not.  With machdep.allowaperture=0 I get the same panic.

Suggestion, anyone?

/ Raimo Niskanen


>
> Here are screenshots from the panic, ddb> trace and ps output:
>
>   https://mailfence.com/pub/docs/raimo_niskanen/web/panic.jpg
>   https://mailfence.com/pub/docs/raimo_niskanen/web/trace-0.jpg
>   https://mailfence.com/pub/docs/raimo_niskanen/web/trace-1.jpg
>   https://mailfence.com/pub/docs/raimo_niskanen/web/ps-1.jpg
>   https://mailfence.com/pub/docs/raimo_niskanen/web/ps-2.jpg
>   https://mailfence.com/pub/docs/raimo_niskanen/web/ps-3.jpg
>
> And here is the dmesg:
>
> OpenBSD 6.5 (GENERIC.MP) #1: Mon May 27 18:27:59 CEST 2019
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 4105912320 (3915MB)
> avail mem = 3971837952 (3787MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe3810 (24 entries)
> bios0: vendor LENOVO version "1CCN24WW" date 11/10/2009
> bios0: LENOVO IdeaPad U350
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP HPET MCFG APIC BOOT SLIC SSDT SSDT SSDT
> acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1296.97 MHz, 06-17-0a
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> cpu0: 3MB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
> cpu0: apic clock running at 247MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1607.97 MHz, 06-17-0a
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> cpu1: 3MB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P2)
> acpiprt2 at acpi0: bus 9 (P0P1)
> acpiprt3 at acpi0: bus 2 (RP01)
> acpiprt4 at acpi0: bus 3 (RP02)
> acpiprt5 at acpi0: bus 8 (RP06)
> acpiec0 at acpi0
> acpicpu0 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS
> acpitz0 at acpi0: critical temperature is 98 degC
> acpipci0 at acpi0 PCI0: _OSC failed
> acpicmos0 at acpi0
> "SYN1031" at acpi0 not configured
> "VPC2004" at acpi0 not configured
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT1 model "L901" serial   type LION oem "CPT-A28"
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: PWRB
> acpibtn2 at acpi0: SLPB
> "PNP0C14" at acpi0 not configured
> acpials0 at acpi0: ALSD
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD03
> cpu0: Enhanced SpeedStep 1296 MHz: speeds: 1300, 1200, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> drm0 at inteldrm0
> intagp0 at inteldrm0
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0: msi
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> azalia0: codecs: Conexant/0x5066, Intel/0x2802, using Conexant/0x5066
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:24:d6:00:bb:7a
> ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
> pci3 at ppb2 bus 5
> ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
> pci4 at ppb3 bus 6
> ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
> pci5 at ppb4 bus 7
> ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi
> pci6 at ppb5 bus 8
> bge0 at pci6 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1 (0x57780001): msi, address 00:26:9e:6f:23:48
> brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci7 at ppb6 bus 9
> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> ahci0: port 0: 3.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3200BEVT-2, 11.0> SCSI3 0/direct fixed naa.50014ee0ac4fd90e
> sd0: 305245MB, 512 bytes/sector, 625142448 sectors
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
> spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xa40000
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX (using slow L1TF mitigation)
> uvideo0 at uhub0 port 5 configuration 1 interface 0 "BISON Corporation Lenovo EasyCamera" rev 2.00/3.17 addr 2
> video0 at uvideo0
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> sd1: 281599MB, 512 bytes/sector, 576716655 sectors
> root on sd1a (ade017f291cda44d.a) swap on sd1b dump on sd1b
> --
>
> / Raimo Niskanen, Erlang/OTP, Ericsson AB

--

/ Raimo Niskanen, Erlang/OTP, Ericsson AB

Reply | Threaded
Open this post in threaded view
|

Re: Lenovo U350 panic when starting X

Stuart Henderson
On 2019/07/08 09:50, Raimo Niskanen wrote:

> On Thu, Jul 04, 2019 at 09:13:22AM +0200, Raimo Niskanen wrote:
> > I just freed a Lenovo U350 IdeaPad from Windows 10 Home and installed
> > OpenBSD 6.5 on it (the installer gets better and better - now I installed
> > the sets via https and cdn.openbsd.org; really slick!), and when starting X
> > it panicked.
> >
> > During the first installation I selected to start xenodm and at firstboot
> > it panicked right after firmware installation during kernel relinking.
> > Both firmware files and kernel appeared to be damaged after reboot and fsck.
> >
> > So this is after a second installation where I selected to not start
> > xenodm, which allowed me to update firmware, syspatch reboot again
> > and wait for quiescent filesystem before starting xenodm, and then;
> > it panicked.
> >
> > I hope it is simply not that machdep.allowaperture=0; if that was needed
> > Xorg should just refuse to start, right?
>
> It was not.  With machdep.allowaperture=0 I get the same panic.
>
> Suggestion, anyone?

Quickly summarizing the panic message etc from the screenshot, it's an
"index out of bounds" panic in aml_parse:4042, called from acpivout_set_param.

As ever, first try a -current snapshot. If it still fails, run
sendbug -P > somefile as root (to generate a report including acpi tables)
and copy to a system you can conveniently email from, include information
from this report (so that the email is self-contained) and preferably
re-type the more important parts from panic.jpg (so it's in plaintext and
developers can more easily figure out if it's something they might know
about).

Maybe also worth trying the newer BIOS versions that are available
(1CCN25WW/1CCN26WW).

>
>
> >
> > Here are screenshots from the panic, ddb> trace and ps output:
> >
> >   https://mailfence.com/pub/docs/raimo_niskanen/web/panic.jpg
> >   https://mailfence.com/pub/docs/raimo_niskanen/web/trace-0.jpg
> >   https://mailfence.com/pub/docs/raimo_niskanen/web/trace-1.jpg
> >   https://mailfence.com/pub/docs/raimo_niskanen/web/ps-1.jpg
> >   https://mailfence.com/pub/docs/raimo_niskanen/web/ps-2.jpg
> >   https://mailfence.com/pub/docs/raimo_niskanen/web/ps-3.jpg
> >
> > And here is the dmesg:
> >
> > OpenBSD 6.5 (GENERIC.MP) #1: Mon May 27 18:27:59 CEST 2019
> >     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 4105912320 (3915MB)
> > avail mem = 3971837952 (3787MB)
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe3810 (24 entries)
> > bios0: vendor LENOVO version "1CCN24WW" date 11/10/2009
> > bios0: LENOVO IdeaPad U350
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP HPET MCFG APIC BOOT SLIC SSDT SSDT SSDT
> > acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) [...]
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpihpet0 at acpi0: 14318179 Hz
> > acpimcfg0 at acpi0
> > acpimcfg0: addr 0xe0000000, bus 0-255
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1296.97 MHz, 06-17-0a
> > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> > cpu0: 3MB 64b/line 8-way L2 cache
> > cpu0: smt 0, core 0, package 0
> > mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 247MHz
> > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1607.97 MHz, 06-17-0a
> > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> > cpu1: 3MB 64b/line 8-way L2 cache
> > cpu1: smt 0, core 1, package 0
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus -1 (P0P2)
> > acpiprt2 at acpi0: bus 9 (P0P1)
> > acpiprt3 at acpi0: bus 2 (RP01)
> > acpiprt4 at acpi0: bus 3 (RP02)
> > acpiprt5 at acpi0: bus 8 (RP06)
> > acpiec0 at acpi0
> > acpicpu0 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS
> > acpicpu1 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS
> > acpitz0 at acpi0: critical temperature is 98 degC
> > acpipci0 at acpi0 PCI0: _OSC failed
> > acpicmos0 at acpi0
> > "SYN1031" at acpi0 not configured
> > "VPC2004" at acpi0 not configured
> > acpiac0 at acpi0: AC unit online
> > acpibat0 at acpi0: BAT1 model "L901" serial   type LION oem "CPT-A28"
> > acpibtn0 at acpi0: LID_
> > acpibtn1 at acpi0: PWRB
> > acpibtn2 at acpi0: SLPB
> > "PNP0C14" at acpi0 not configured
> > acpials0 at acpi0: ALSD
> > acpivideo0 at acpi0: GFX0
> > acpivout0 at acpivideo0: DD03
> > cpu0: Enhanced SpeedStep 1296 MHz: speeds: 1300, 1200, 800 MHz
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> > inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> > drm0 at inteldrm0
> > intagp0 at inteldrm0
> > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> > inteldrm0: msi
> > inteldrm0: 1366x768, 32bpp
> > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21
> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19
> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> > azalia0: codecs: Conexant/0x5066, Intel/0x2802, using Conexant/0x5066
> > audio0 at azalia0
> > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
> > pci1 at ppb0 bus 2
> > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
> > pci2 at ppb1 bus 3
> > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:24:d6:00:bb:7a
> > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
> > pci3 at ppb2 bus 5
> > ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
> > pci4 at ppb3 bus 6
> > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
> > pci5 at ppb4 bus 7
> > ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi
> > pci6 at ppb5 bus 8
> > bge0 at pci6 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1 (0x57780001): msi, address 00:26:9e:6f:23:48
> > brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23
> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19
> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> > pci7 at ppb6 bus 9
> > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> > ahci0: port 0: 3.0Gb/s
> > scsibus1 at ahci0: 32 targets
> > sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3200BEVT-2, 11.0> SCSI3 0/direct fixed naa.50014ee0ac4fd90e
> > sd0: 305245MB, 512 bytes/sector, 625142448 sectors
> > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
> > iic0 at ichiic0
> > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
> > spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
> > usb2 at uhci0: USB revision 1.0
> > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > wsmouse0 at pms0 mux 0
> > pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xa40000
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > vmm0 at mainbus0: VMX (using slow L1TF mitigation)
> > uvideo0 at uhub0 port 5 configuration 1 interface 0 "BISON Corporation Lenovo EasyCamera" rev 2.00/3.17 addr 2
> > video0 at uvideo0
> > vscsi0 at root
> > scsibus2 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> > sd1: 281599MB, 512 bytes/sector, 576716655 sectors
> > root on sd1a (ade017f291cda44d.a) swap on sd1b dump on sd1b
> > --
> >
> > / Raimo Niskanen, Erlang/OTP, Ericsson AB
>
> --
>
> / Raimo Niskanen, Erlang/OTP, Ericsson AB
>

Reply | Threaded
Open this post in threaded view
|

Re: Lenovo U350 panic when starting X

Raimo Niskanen-2
On Mon, Jul 08, 2019 at 04:40:19PM +0100, Stuart Henderson wrote:

> On 2019/07/08 09:50, Raimo Niskanen wrote:
> > On Thu, Jul 04, 2019 at 09:13:22AM +0200, Raimo Niskanen wrote:
> > > I just freed a Lenovo U350 IdeaPad from Windows 10 Home and installed
> > > OpenBSD 6.5 on it (the installer gets better and better - now I installed
> > > the sets via https and cdn.openbsd.org; really slick!), and when starting X
> > > it panicked.
> > >
> > > During the first installation I selected to start xenodm and at firstboot
> > > it panicked right after firmware installation during kernel relinking.
> > > Both firmware files and kernel appeared to be damaged after reboot and fsck.
> > >
> > > So this is after a second installation where I selected to not start
> > > xenodm, which allowed me to update firmware, syspatch reboot again
> > > and wait for quiescent filesystem before starting xenodm, and then;
> > > it panicked.
> > >
> > > I hope it is simply not that machdep.allowaperture=0; if that was needed
> > > Xorg should just refuse to start, right?
> >
> > It was not.  With machdep.allowaperture=0 I get the same panic.
> >
> > Suggestion, anyone?
>
> Quickly summarizing the panic message etc from the screenshot, it's an
> "index out of bounds" panic in aml_parse:4042, called from acpivout_set_param.
>
> As ever, first try a -current snapshot. If it still fails, run
> sendbug -P > somefile as root (to generate a report including acpi tables)
> and copy to a system you can conveniently email from, include information
> from this report (so that the email is self-contained) and preferably
> re-type the more important parts from panic.jpg (so it's in plaintext and
> developers can more easily figure out if it's something they might know
> about).

Ok.  Thank you!  I will do that.

>
> Maybe also worth trying the newer BIOS versions that are available
> (1CCN25WW/1CCN26WW).

Aah...  I saw that, but the only BIOS updates I can find are in the form of
Windows 7 .exe files, and I wiped the Windows installation.  So I see two
possible ways - either to try to reinstall Windows from an old restore DVD
that I seriously doubt to be readable, or to find a trustworthy download of
a Windows 7 Live CD (or maybe 8, but the places I have seen them feel
a bit shady).

Or are there other black magic ways to find and update Lenovo BIOS:es for
this machine generation?

/Raimo Niskanen


>
> >
> >
> > >
> > > Here are screenshots from the panic, ddb> trace and ps output:
> > >
> > >   https://mailfence.com/pub/docs/raimo_niskanen/web/panic.jpg
> > >   https://mailfence.com/pub/docs/raimo_niskanen/web/trace-0.jpg
> > >   https://mailfence.com/pub/docs/raimo_niskanen/web/trace-1.jpg
> > >   https://mailfence.com/pub/docs/raimo_niskanen/web/ps-1.jpg
> > >   https://mailfence.com/pub/docs/raimo_niskanen/web/ps-2.jpg
> > >   https://mailfence.com/pub/docs/raimo_niskanen/web/ps-3.jpg
> > >
> > > And here is the dmesg:
> > >
> > > OpenBSD 6.5 (GENERIC.MP) #1: Mon May 27 18:27:59 CEST 2019
> > >     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > > real mem = 4105912320 (3915MB)
> > > avail mem = 3971837952 (3787MB)
> > > mpath0 at root
> > > scsibus0 at mpath0: 256 targets
> > > mainbus0 at root
> > > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe3810 (24 entries)
> > > bios0: vendor LENOVO version "1CCN24WW" date 11/10/2009
> > > bios0: LENOVO IdeaPad U350
> > > acpi0 at bios0: rev 2
> > > acpi0: sleep states S0 S3 S4 S5
> > > acpi0: tables DSDT FACP HPET MCFG APIC BOOT SLIC SSDT SSDT SSDT
> > > acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) [...]
> > > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > > acpihpet0 at acpi0: 14318179 Hz
> > > acpimcfg0 at acpi0
> > > acpimcfg0: addr 0xe0000000, bus 0-255
> > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > cpu0 at mainbus0: apid 0 (boot processor)
> > > cpu0: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1296.97 MHz, 06-17-0a
> > > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> > > cpu0: 3MB 64b/line 8-way L2 cache
> > > cpu0: smt 0, core 0, package 0
> > > mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
> > > cpu0: apic clock running at 247MHz
> > > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
> > > cpu1 at mainbus0: apid 1 (application processor)
> > > cpu1: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1607.97 MHz, 06-17-0a
> > > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> > > cpu1: 3MB 64b/line 8-way L2 cache
> > > cpu1: smt 0, core 1, package 0
> > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > > acpiprt0 at acpi0: bus 0 (PCI0)
> > > acpiprt1 at acpi0: bus -1 (P0P2)
> > > acpiprt2 at acpi0: bus 9 (P0P1)
> > > acpiprt3 at acpi0: bus 2 (RP01)
> > > acpiprt4 at acpi0: bus 3 (RP02)
> > > acpiprt5 at acpi0: bus 8 (RP06)
> > > acpiec0 at acpi0
> > > acpicpu0 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS
> > > acpicpu1 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS
> > > acpitz0 at acpi0: critical temperature is 98 degC
> > > acpipci0 at acpi0 PCI0: _OSC failed
> > > acpicmos0 at acpi0
> > > "SYN1031" at acpi0 not configured
> > > "VPC2004" at acpi0 not configured
> > > acpiac0 at acpi0: AC unit online
> > > acpibat0 at acpi0: BAT1 model "L901" serial   type LION oem "CPT-A28"
> > > acpibtn0 at acpi0: LID_
> > > acpibtn1 at acpi0: PWRB
> > > acpibtn2 at acpi0: SLPB
> > > "PNP0C14" at acpi0 not configured
> > > acpials0 at acpi0: ALSD
> > > acpivideo0 at acpi0: GFX0
> > > acpivout0 at acpivideo0: DD03
> > > cpu0: Enhanced SpeedStep 1296 MHz: speeds: 1300, 1200, 800 MHz
> > > pci0 at mainbus0 bus 0
> > > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> > > inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> > > drm0 at inteldrm0
> > > intagp0 at inteldrm0
> > > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> > > inteldrm0: msi
> > > inteldrm0: 1366x768, 32bpp
> > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> > > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> > > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
> > > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21
> > > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19
> > > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19
> > > usb0 at ehci0: USB revision 2.0
> > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> > > azalia0: codecs: Conexant/0x5066, Intel/0x2802, using Conexant/0x5066
> > > audio0 at azalia0
> > > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
> > > pci1 at ppb0 bus 2
> > > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
> > > pci2 at ppb1 bus 3
> > > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:24:d6:00:bb:7a
> > > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
> > > pci3 at ppb2 bus 5
> > > ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
> > > pci4 at ppb3 bus 6
> > > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
> > > pci5 at ppb4 bus 7
> > > ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi
> > > pci6 at ppb5 bus 8
> > > bge0 at pci6 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1 (0x57780001): msi, address 00:26:9e:6f:23:48
> > > brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
> > > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23
> > > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19
> > > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
> > > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23
> > > usb1 at ehci1: USB revision 2.0
> > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > > ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> > > pci7 at ppb6 bus 9
> > > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> > > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> > > ahci0: port 0: 3.0Gb/s
> > > scsibus1 at ahci0: 32 targets
> > > sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3200BEVT-2, 11.0> SCSI3 0/direct fixed naa.50014ee0ac4fd90e
> > > sd0: 305245MB, 512 bytes/sector, 625142448 sectors
> > > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
> > > iic0 at ichiic0
> > > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
> > > spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
> > > usb2 at uhci0: USB revision 1.0
> > > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > usb3 at uhci1: USB revision 1.0
> > > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > usb4 at uhci2: USB revision 1.0
> > > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > usb5 at uhci3: USB revision 1.0
> > > uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > usb6 at uhci4: USB revision 1.0
> > > uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > usb7 at uhci5: USB revision 1.0
> > > uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > isa0 at pcib0
> > > isadma0 at isa0
> > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > > pckbd0 at pckbc0 (kbd slot)
> > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > > pms0 at pckbc0 (aux slot)
> > > wsmouse0 at pms0 mux 0
> > > pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xa40000
> > > pcppi0 at isa0 port 0x61
> > > spkr0 at pcppi0
> > > vmm0 at mainbus0: VMX (using slow L1TF mitigation)
> > > uvideo0 at uhub0 port 5 configuration 1 interface 0 "BISON Corporation Lenovo EasyCamera" rev 2.00/3.17 addr 2
> > > video0 at uvideo0
> > > vscsi0 at root
> > > scsibus2 at vscsi0: 256 targets
> > > softraid0 at root
> > > scsibus3 at softraid0: 256 targets
> > > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> > > sd1: 281599MB, 512 bytes/sector, 576716655 sectors
> > > root on sd1a (ade017f291cda44d.a) swap on sd1b dump on sd1b
> > > --
> > >
> > > / Raimo Niskanen, Erlang/OTP, Ericsson AB
> >
> > --
> >
> > / Raimo Niskanen, Erlang/OTP, Ericsson AB
> >

--

/ Raimo Niskanen, Erlang/OTP, Ericsson AB

Reply | Threaded
Open this post in threaded view
|

Re: Lenovo U350 panic when starting X

Chris Humphries-2
On Tue, Jul 09, 2019 at 08:57:43AM +0200, Raimo Niskanen wrote:

> On Mon, Jul 08, 2019 at 04:40:19PM +0100, Stuart Henderson wrote:
> > On 2019/07/08 09:50, Raimo Niskanen wrote:
> > > On Thu, Jul 04, 2019 at 09:13:22AM +0200, Raimo Niskanen wrote:
> > > > I just freed a Lenovo U350 IdeaPad from Windows 10 Home and installed
> > > > OpenBSD 6.5 on it (the installer gets better and better - now I installed
> > > > the sets via https and cdn.openbsd.org; really slick!), and when starting X
> > > > it panicked.
> > > >
> > > > During the first installation I selected to start xenodm and at firstboot
> > > > it panicked right after firmware installation during kernel relinking.
> > > > Both firmware files and kernel appeared to be damaged after reboot and fsck.
> > > >
> > > > So this is after a second installation where I selected to not start
> > > > xenodm, which allowed me to update firmware, syspatch reboot again
> > > > and wait for quiescent filesystem before starting xenodm, and then;
> > > > it panicked.
> > > >
> > > > I hope it is simply not that machdep.allowaperture=0; if that was needed
> > > > Xorg should just refuse to start, right?
> > >
> > > It was not.  With machdep.allowaperture=0 I get the same panic.
> > >
> > > Suggestion, anyone?
> >
> > Quickly summarizing the panic message etc from the screenshot, it's an
> > "index out of bounds" panic in aml_parse:4042, called from acpivout_set_param.
> >
> > As ever, first try a -current snapshot. If it still fails, run
> > sendbug -P > somefile as root (to generate a report including acpi tables)
> > and copy to a system you can conveniently email from, include information
> > from this report (so that the email is self-contained) and preferably
> > re-type the more important parts from panic.jpg (so it's in plaintext and
> > developers can more easily figure out if it's something they might know
> > about).
>
> Ok.  Thank you!  I will do that.
>
> >
> > Maybe also worth trying the newer BIOS versions that are available
> > (1CCN25WW/1CCN26WW).
>
> Aah...  I saw that, but the only BIOS updates I can find are in the form of
> Windows 7 .exe files, and I wiped the Windows installation.  So I see two
> possible ways - either to try to reinstall Windows from an old restore DVD
> that I seriously doubt to be readable, or to find a trustworthy download of
> a Windows 7 Live CD (or maybe 8, but the places I have seen them feel
> a bit shady).
>
> Or are there other black magic ways to find and update Lenovo BIOS:es for
> this machine generation?


I think on that same screen where the Windows BIOS firmware updater
exe files are is also a link to an ISO, which you can burn to a cd or
usb stick. It isn't obvious, search the web page for "iso".

I did the same thing yesterday with my Thinkpad T420, even though the
link to the ISO was broken on the page, a google search found the
direct link.

I wish you luck,
Chris

>
> /Raimo Niskanen
>
>
> >
> > >
> > >
> > > >
> > > > Here are screenshots from the panic, ddb> trace and ps output:
> > > >
> > > >   https://mailfence.com/pub/docs/raimo_niskanen/web/panic.jpg
> > > >   https://mailfence.com/pub/docs/raimo_niskanen/web/trace-0.jpg
> > > >   https://mailfence.com/pub/docs/raimo_niskanen/web/trace-1.jpg
> > > >   https://mailfence.com/pub/docs/raimo_niskanen/web/ps-1.jpg
> > > >   https://mailfence.com/pub/docs/raimo_niskanen/web/ps-2.jpg
> > > >   https://mailfence.com/pub/docs/raimo_niskanen/web/ps-3.jpg
> > > >
> > > > And here is the dmesg:
> > > >
> > > > OpenBSD 6.5 (GENERIC.MP) #1: Mon May 27 18:27:59 CEST 2019
> > > >     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > > > real mem = 4105912320 (3915MB)
> > > > avail mem = 3971837952 (3787MB)
> > > > mpath0 at root
> > > > scsibus0 at mpath0: 256 targets
> > > > mainbus0 at root
> > > > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe3810 (24 entries)
> > > > bios0: vendor LENOVO version "1CCN24WW" date 11/10/2009
> > > > bios0: LENOVO IdeaPad U350
> > > > acpi0 at bios0: rev 2
> > > > acpi0: sleep states S0 S3 S4 S5
> > > > acpi0: tables DSDT FACP HPET MCFG APIC BOOT SLIC SSDT SSDT SSDT
> > > > acpi0: wakeup devices P0P2(S4) P0P1(S4) USB0(S3) USB1(S3) USB2(S3) USBR(S3) EHC1(S3) USB3(S3) USB4(S3) USB5(S3) EHC2(S3) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) [...]
> > > > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > > > acpihpet0 at acpi0: 14318179 Hz
> > > > acpimcfg0 at acpi0
> > > > acpimcfg0: addr 0xe0000000, bus 0-255
> > > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > > cpu0 at mainbus0: apid 0 (boot processor)
> > > > cpu0: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1296.97 MHz, 06-17-0a
> > > > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> > > > cpu0: 3MB 64b/line 8-way L2 cache
> > > > cpu0: smt 0, core 0, package 0
> > > > mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges
> > > > cpu0: apic clock running at 247MHz
> > > > cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2.1.3, IBE
> > > > cpu1 at mainbus0: apid 1 (application processor)
> > > > cpu1: Genuine Intel(R) CPU U7300 @ 1.30GHz, 1607.97 MHz, 06-17-0a
> > > > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF,SENSOR,MELTDOWN
> > > > cpu1: 3MB 64b/line 8-way L2 cache
> > > > cpu1: smt 0, core 1, package 0
> > > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > > > acpiprt0 at acpi0: bus 0 (PCI0)
> > > > acpiprt1 at acpi0: bus -1 (P0P2)
> > > > acpiprt2 at acpi0: bus 9 (P0P1)
> > > > acpiprt3 at acpi0: bus 2 (RP01)
> > > > acpiprt4 at acpi0: bus 3 (RP02)
> > > > acpiprt5 at acpi0: bus 8 (RP06)
> > > > acpiec0 at acpi0
> > > > acpicpu0 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS
> > > > acpicpu1 at acpi0: !C2(100@57 mwait.3@0x30), C1(1000@1 mwait.1), PSS
> > > > acpitz0 at acpi0: critical temperature is 98 degC
> > > > acpipci0 at acpi0 PCI0: _OSC failed
> > > > acpicmos0 at acpi0
> > > > "SYN1031" at acpi0 not configured
> > > > "VPC2004" at acpi0 not configured
> > > > acpiac0 at acpi0: AC unit online
> > > > acpibat0 at acpi0: BAT1 model "L901" serial   type LION oem "CPT-A28"
> > > > acpibtn0 at acpi0: LID_
> > > > acpibtn1 at acpi0: PWRB
> > > > acpibtn2 at acpi0: SLPB
> > > > "PNP0C14" at acpi0 not configured
> > > > acpials0 at acpi0: ALSD
> > > > acpivideo0 at acpi0: GFX0
> > > > acpivout0 at acpivideo0: DD03
> > > > cpu0: Enhanced SpeedStep 1296 MHz: speeds: 1300, 1200, 800 MHz
> > > > pci0 at mainbus0 bus 0
> > > > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> > > > inteldrm0 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> > > > drm0 at inteldrm0
> > > > intagp0 at inteldrm0
> > > > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> > > > inteldrm0: msi
> > > > inteldrm0: 1366x768, 32bpp
> > > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> > > > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > > > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> > > > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 16
> > > > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 21
> > > > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 19
> > > > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 19
> > > > usb0 at ehci0: USB revision 2.0
> > > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > > > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> > > > azalia0: codecs: Conexant/0x5066, Intel/0x2802, using Conexant/0x5066
> > > > audio0 at azalia0
> > > > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi
> > > > pci1 at ppb0 bus 2
> > > > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: msi
> > > > pci2 at ppb1 bus 3
> > > > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5100" rev 0x00: msi, MIMO 1T2R, MoW, address 00:24:d6:00:bb:7a
> > > > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: msi
> > > > pci3 at ppb2 bus 5
> > > > ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: msi
> > > > pci4 at ppb3 bus 6
> > > > ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: msi
> > > > pci5 at ppb4 bus 7
> > > > ppb5 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x03: msi
> > > > pci6 at ppb5 bus 8
> > > > bge0 at pci6 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1 (0x57780001): msi, address 00:26:9e:6f:23:48
> > > > brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
> > > > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 2 int 23
> > > > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 2 int 19
> > > > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 2 int 18
> > > > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 2 int 23
> > > > usb1 at ehci1: USB revision 2.0
> > > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > > > ppb6 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> > > > pci7 at ppb6 bus 9
> > > > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> > > > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> > > > ahci0: port 0: 3.0Gb/s
> > > > scsibus1 at ahci0: 32 targets
> > > > sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD3200BEVT-2, 11.0> SCSI3 0/direct fixed naa.50014ee0ac4fd90e
> > > > sd0: 305245MB, 512 bytes/sector, 625142448 sectors
> > > > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 2 int 19
> > > > iic0 at ichiic0
> > > > spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
> > > > spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-8500 SO-DIMM
> > > > usb2 at uhci0: USB revision 1.0
> > > > uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > > usb3 at uhci1: USB revision 1.0
> > > > uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > > usb4 at uhci2: USB revision 1.0
> > > > uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > > usb5 at uhci3: USB revision 1.0
> > > > uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > > usb6 at uhci4: USB revision 1.0
> > > > uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > > usb7 at uhci5: USB revision 1.0
> > > > uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > > > isa0 at pcib0
> > > > isadma0 at isa0
> > > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > > > pckbd0 at pckbc0 (kbd slot)
> > > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > > > pms0 at pckbc0 (aux slot)
> > > > wsmouse0 at pms0 mux 0
> > > > pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xa40000
> > > > pcppi0 at isa0 port 0x61
> > > > spkr0 at pcppi0
> > > > vmm0 at mainbus0: VMX (using slow L1TF mitigation)
> > > > uvideo0 at uhub0 port 5 configuration 1 interface 0 "BISON Corporation Lenovo EasyCamera" rev 2.00/3.17 addr 2
> > > > video0 at uvideo0
> > > > vscsi0 at root
> > > > scsibus2 at vscsi0: 256 targets
> > > > softraid0 at root
> > > > scsibus3 at softraid0: 256 targets
> > > > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> > > > sd1: 281599MB, 512 bytes/sector, 576716655 sectors
> > > > root on sd1a (ade017f291cda44d.a) swap on sd1b dump on sd1b
> > > > --
> > > >
> > > > / Raimo Niskanen, Erlang/OTP, Ericsson AB
> > >
> > > --
> > >
> > > / Raimo Niskanen, Erlang/OTP, Ericsson AB
> > >
>
> --
>
> / Raimo Niskanen, Erlang/OTP, Ericsson AB
>

--
Chris Humphries <[hidden email]>
5223 9548 E1DE DE87 F509  1888 8141 8451 6338 DD29

Reply | Threaded
Open this post in threaded view
|

Re: Lenovo U350 panic when starting X

Stuart Henderson
On 2019/07/09 17:32, Chris Humphries wrote:

> On Tue, Jul 09, 2019 at 08:57:43AM +0200, Raimo Niskanen wrote:
> > On Mon, Jul 08, 2019 at 04:40:19PM +0100, Stuart Henderson wrote:
> > > On 2019/07/08 09:50, Raimo Niskanen wrote:
> > > > On Thu, Jul 04, 2019 at 09:13:22AM +0200, Raimo Niskanen wrote:
> > > > > I just freed a Lenovo U350 IdeaPad from Windows 10 Home and installed
> > > > > OpenBSD 6.5 on it (the installer gets better and better - now I installed
> > > > > the sets via https and cdn.openbsd.org; really slick!), and when starting X
> > > > > it panicked.
> > > > >
> > > > > During the first installation I selected to start xenodm and at firstboot
> > > > > it panicked right after firmware installation during kernel relinking.
> > > > > Both firmware files and kernel appeared to be damaged after reboot and fsck.
> > > > >
> > > > > So this is after a second installation where I selected to not start
> > > > > xenodm, which allowed me to update firmware, syspatch reboot again
> > > > > and wait for quiescent filesystem before starting xenodm, and then;
> > > > > it panicked.
> > > > >
> > > > > I hope it is simply not that machdep.allowaperture=0; if that was needed
> > > > > Xorg should just refuse to start, right?
> > > >
> > > > It was not.  With machdep.allowaperture=0 I get the same panic.
> > > >
> > > > Suggestion, anyone?
> > >
> > > Quickly summarizing the panic message etc from the screenshot, it's an
> > > "index out of bounds" panic in aml_parse:4042, called from acpivout_set_param.
> > >
> > > As ever, first try a -current snapshot. If it still fails, run
> > > sendbug -P > somefile as root (to generate a report including acpi tables)
> > > and copy to a system you can conveniently email from, include information
> > > from this report (so that the email is self-contained) and preferably
> > > re-type the more important parts from panic.jpg (so it's in plaintext and
> > > developers can more easily figure out if it's something they might know
> > > about).
> >
> > Ok.  Thank you!  I will do that.
> >
> > >
> > > Maybe also worth trying the newer BIOS versions that are available
> > > (1CCN25WW/1CCN26WW).
> >
> > Aah...  I saw that, but the only BIOS updates I can find are in the form of
> > Windows 7 .exe files, and I wiped the Windows installation.  So I see two
> > possible ways - either to try to reinstall Windows from an old restore DVD
> > that I seriously doubt to be readable, or to find a trustworthy download of
> > a Windows 7 Live CD (or maybe 8, but the places I have seen them feel
> > a bit shady).
> >
> > Or are there other black magic ways to find and update Lenovo BIOS:es for
> > this machine generation?
>
>
> I think on that same screen where the Windows BIOS firmware updater
> exe files are is also a link to an ISO, which you can burn to a cd or
> usb stick. It isn't obvious, search the web page for "iso".
>
> I did the same thing yesterday with my Thinkpad T420, even though the
> link to the ISO was broken on the page, a google search found the
> direct link.

For most thinkpads you can fetch an iso and use "geteltorito" (in
ports) to extract an image that can be dd'd to a USB stick if you don't
have a CD drive. But not for the ideapads.

You can download a clean Windows 10 iso from Microsoft, and it will
install without a product key, just disables a few things if it's not
activated that are unlikely to matter for this ...

Or you might be able to do something with a DOS version of the Phoenix
flash programmer phlash16.exe and the files you get from unzipping
1CCN26WW.exe.

Given the hassle levels involved I would have a good attempt at seeing
if it will work without the update though :)

Reply | Threaded
Open this post in threaded view
|

Re: Lenovo U350 panic when starting X

Chris Humphries-2
On Tue, Jul 09, 2019 at 09:01:30PM +0100, Stuart Henderson wrote:

> On 2019/07/09 17:32, Chris Humphries wrote:
> > On Tue, Jul 09, 2019 at 08:57:43AM +0200, Raimo Niskanen wrote:
> > > On Mon, Jul 08, 2019 at 04:40:19PM +0100, Stuart Henderson wrote:
> > > > On 2019/07/08 09:50, Raimo Niskanen wrote:
> > > > > On Thu, Jul 04, 2019 at 09:13:22AM +0200, Raimo Niskanen wrote:
> > > > > > I just freed a Lenovo U350 IdeaPad from Windows 10 Home and installed
> > > > > > OpenBSD 6.5 on it (the installer gets better and better - now I installed
> > > > > > the sets via https and cdn.openbsd.org; really slick!), and when starting X
> > > > > > it panicked.
> > > > > >
> > > > > > During the first installation I selected to start xenodm and at firstboot
> > > > > > it panicked right after firmware installation during kernel relinking.
> > > > > > Both firmware files and kernel appeared to be damaged after reboot and fsck.
> > > > > >
> > > > > > So this is after a second installation where I selected to not start
> > > > > > xenodm, which allowed me to update firmware, syspatch reboot again
> > > > > > and wait for quiescent filesystem before starting xenodm, and then;
> > > > > > it panicked.
> > > > > >
> > > > > > I hope it is simply not that machdep.allowaperture=0; if that was needed
> > > > > > Xorg should just refuse to start, right?
> > > > >
> > > > > It was not.  With machdep.allowaperture=0 I get the same panic.
> > > > >
> > > > > Suggestion, anyone?
> > > >
> > > > Quickly summarizing the panic message etc from the screenshot, it's an
> > > > "index out of bounds" panic in aml_parse:4042, called from acpivout_set_param.
> > > >
> > > > As ever, first try a -current snapshot. If it still fails, run
> > > > sendbug -P > somefile as root (to generate a report including acpi tables)
> > > > and copy to a system you can conveniently email from, include information
> > > > from this report (so that the email is self-contained) and preferably
> > > > re-type the more important parts from panic.jpg (so it's in plaintext and
> > > > developers can more easily figure out if it's something they might know
> > > > about).
> > >
> > > Ok.  Thank you!  I will do that.
> > >
> > > >
> > > > Maybe also worth trying the newer BIOS versions that are available
> > > > (1CCN25WW/1CCN26WW).
> > >
> > > Aah...  I saw that, but the only BIOS updates I can find are in the form of
> > > Windows 7 .exe files, and I wiped the Windows installation.  So I see two
> > > possible ways - either to try to reinstall Windows from an old restore DVD
> > > that I seriously doubt to be readable, or to find a trustworthy download of
> > > a Windows 7 Live CD (or maybe 8, but the places I have seen them feel
> > > a bit shady).
> > >
> > > Or are there other black magic ways to find and update Lenovo BIOS:es for
> > > this machine generation?
> >
> >
> > I think on that same screen where the Windows BIOS firmware updater
> > exe files are is also a link to an ISO, which you can burn to a cd or
> > usb stick. It isn't obvious, search the web page for "iso".
> >
> > I did the same thing yesterday with my Thinkpad T420, even though the
> > link to the ISO was broken on the page, a google search found the
> > direct link.
>
> For most thinkpads you can fetch an iso and use "geteltorito" (in
> ports) to extract an image that can be dd'd to a USB stick if you don't
> have a CD drive. But not for the ideapads.
>
> You can download a clean Windows 10 iso from Microsoft, and it will
> install without a product key, just disables a few things if it's not
> activated that are unlikely to matter for this ...
>
> Or you might be able to do something with a DOS version of the Phoenix
> flash programmer phlash16.exe and the files you get from unzipping
> 1CCN26WW.exe.
>
> Given the hassle levels involved I would have a good attempt at seeing
> if it will work without the update though :)
>

Jeez, that's a pain.

Thanks for the info about geteltorito port, that's a handy tip to know!


--
Chris Humphries <[hidden email]>
5223 9548 E1DE DE87 F509  1888 8141 8451 6338 DD29

Reply | Threaded
Open this post in threaded view
|

Re: Lenovo U350 panic when starting X

Raimo Niskanen-2
In reply to this post by Stuart Henderson
On Tue, Jul 09, 2019 at 09:01:30PM +0100, Stuart Henderson wrote:

> On 2019/07/09 17:32, Chris Humphries wrote:
> > On Tue, Jul 09, 2019 at 08:57:43AM +0200, Raimo Niskanen wrote:
> > > On Mon, Jul 08, 2019 at 04:40:19PM +0100, Stuart Henderson wrote:
> > > > On 2019/07/08 09:50, Raimo Niskanen wrote:
> > > > > On Thu, Jul 04, 2019 at 09:13:22AM +0200, Raimo Niskanen wrote:
> > > > > > I just freed a Lenovo U350 IdeaPad from Windows 10 Home and installed
> > > > > > OpenBSD 6.5 on it (the installer gets better and better - now I installed
> > > > > > the sets via https and cdn.openbsd.org; really slick!), and when starting X
> > > > > > it panicked.
> > > > > >
> > > > > > During the first installation I selected to start xenodm and at firstboot
> > > > > > it panicked right after firmware installation during kernel relinking.
> > > > > > Both firmware files and kernel appeared to be damaged after reboot and fsck.
> > > > > >
> > > > > > So this is after a second installation where I selected to not start
> > > > > > xenodm, which allowed me to update firmware, syspatch reboot again
> > > > > > and wait for quiescent filesystem before starting xenodm, and then;
> > > > > > it panicked.
> > > > > >
> > > > > > I hope it is simply not that machdep.allowaperture=0; if that was needed
> > > > > > Xorg should just refuse to start, right?
> > > > >
> > > > > It was not.  With machdep.allowaperture=0 I get the same panic.
> > > > >
> > > > > Suggestion, anyone?
> > > >
> > > > Quickly summarizing the panic message etc from the screenshot, it's an
> > > > "index out of bounds" panic in aml_parse:4042, called from acpivout_set_param.
> > > >
> > > > As ever, first try a -current snapshot. If it still fails, run
> > > > sendbug -P > somefile as root (to generate a report including acpi tables)
> > > > and copy to a system you can conveniently email from, include information
> > > > from this report (so that the email is self-contained) and preferably
> > > > re-type the more important parts from panic.jpg (so it's in plaintext and
> > > > developers can more easily figure out if it's something they might know
> > > > about).
> > >
> > > Ok.  Thank you!  I will do that.
> > >
> > > >
> > > > Maybe also worth trying the newer BIOS versions that are available
> > > > (1CCN25WW/1CCN26WW).
> > >
> > > Aah...  I saw that, but the only BIOS updates I can find are in the form of
> > > Windows 7 .exe files, and I wiped the Windows installation.  So I see two
> > > possible ways - either to try to reinstall Windows from an old restore DVD
> > > that I seriously doubt to be readable, or to find a trustworthy download of
> > > a Windows 7 Live CD (or maybe 8, but the places I have seen them feel
> > > a bit shady).
> > >
> > > Or are there other black magic ways to find and update Lenovo BIOS:es for
> > > this machine generation?
> >
> >
> > I think on that same screen where the Windows BIOS firmware updater
> > exe files are is also a link to an ISO, which you can burn to a cd or
> > usb stick. It isn't obvious, search the web page for "iso".
> >
> > I did the same thing yesterday with my Thinkpad T420, even though the
> > link to the ISO was broken on the page, a google search found the
> > direct link.
>
> For most thinkpads you can fetch an iso and use "geteltorito" (in
> ports) to extract an image that can be dd'd to a USB stick if you don't
> have a CD drive. But not for the ideapads.
>
> You can download a clean Windows 10 iso from Microsoft, and it will
> install without a product key, just disables a few things if it's not
> activated that are unlikely to matter for this ...
>
> Or you might be able to do something with a DOS version of the Phoenix
> flash programmer phlash16.exe and the files you get from unzipping
> 1CCN26WW.exe.
>
> Given the hassle levels involved I would have a good attempt at seeing
> if it will work without the update though :)

I agree!

--

/ Raimo Niskanen, Erlang/OTP, Ericsson AB

Reply | Threaded
Open this post in threaded view
|

Re: Lenovo U350 panic when starting X

Raimo Niskanen-2
In reply to this post by Stuart Henderson
On Tue, Jul 09, 2019 at 09:01:30PM +0100, Stuart Henderson wrote:

> On 2019/07/09 17:32, Chris Humphries wrote:
> > On Tue, Jul 09, 2019 at 08:57:43AM +0200, Raimo Niskanen wrote:
> > > On Mon, Jul 08, 2019 at 04:40:19PM +0100, Stuart Henderson wrote:
> > > > On 2019/07/08 09:50, Raimo Niskanen wrote:
> > > > > On Thu, Jul 04, 2019 at 09:13:22AM +0200, Raimo Niskanen wrote:
> > > > > > I just freed a Lenovo U350 IdeaPad from Windows 10 Home and installed
> > > > > > OpenBSD 6.5 on it (the installer gets better and better - now I installed
> > > > > > the sets via https and cdn.openbsd.org; really slick!), and when starting X
> > > > > > it panicked.
> > > > > >
> > > > > > During the first installation I selected to start xenodm and at firstboot
> > > > > > it panicked right after firmware installation during kernel relinking.
> > > > > > Both firmware files and kernel appeared to be damaged after reboot and fsck.
> > > > > >
> > > > > > So this is after a second installation where I selected to not start
> > > > > > xenodm, which allowed me to update firmware, syspatch reboot again
> > > > > > and wait for quiescent filesystem before starting xenodm, and then;
> > > > > > it panicked.
> > > > > >
> > > > > > I hope it is simply not that machdep.allowaperture=0; if that was needed
> > > > > > Xorg should just refuse to start, right?
> > > > >
> > > > > It was not.  With machdep.allowaperture=0 I get the same panic.
> > > > >
> > > > > Suggestion, anyone?
> > > >
> > > > Quickly summarizing the panic message etc from the screenshot, it's an
> > > > "index out of bounds" panic in aml_parse:4042, called from acpivout_set_param.
> > > >
> > > > As ever, first try a -current snapshot. If it still fails, run
> > > > sendbug -P > somefile as root (to generate a report including acpi tables)
> > > > and copy to a system you can conveniently email from, include information
> > > > from this report (so that the email is self-contained) and preferably
> > > > re-type the more important parts from panic.jpg (so it's in plaintext and
> > > > developers can more easily figure out if it's something they might know
> > > > about).
> > >
> > > Ok.  Thank you!  I will do that.
> > >
> > > >
> > > > Maybe also worth trying the newer BIOS versions that are available
> > > > (1CCN25WW/1CCN26WW).
> > >
> > > Aah...  I saw that, but the only BIOS updates I can find are in the form of
> > > Windows 7 .exe files, and I wiped the Windows installation.  So I see two
> > > possible ways - either to try to reinstall Windows from an old restore DVD
> > > that I seriously doubt to be readable, or to find a trustworthy download of
> > > a Windows 7 Live CD (or maybe 8, but the places I have seen them feel
> > > a bit shady).
> > >
> > > Or are there other black magic ways to find and update Lenovo BIOS:es for
> > > this machine generation?
> >
> >
> > I think on that same screen where the Windows BIOS firmware updater
> > exe files are is also a link to an ISO, which you can burn to a cd or
> > usb stick. It isn't obvious, search the web page for "iso".
> >
> > I did the same thing yesterday with my Thinkpad T420, even though the
> > link to the ISO was broken on the page, a google search found the
> > direct link.
>
> For most thinkpads you can fetch an iso and use "geteltorito" (in
> ports) to extract an image that can be dd'd to a USB stick if you don't
> have a CD drive. But not for the ideapads.
>
> You can download a clean Windows 10 iso from Microsoft, and it will
> install without a product key, just disables a few things if it's not
> activated that are unlikely to matter for this ...
>
> Or you might be able to do something with a DOS version of the Phoenix
> flash programmer phlash16.exe and the files you get from unzipping
> 1CCN26WW.exe.
>
> Given the hassle levels involved I would have a good attempt at seeing
> if it will work without the update though :)

I did the BIOS update, but no improvement.  The panic, at least, is exactly
the same, expect for small differences in the arg0 addresses.

For the record, this is how I did it:

I have a Windows 10 computer and used it to follow:
  https://www.intowindows.com/4-tools-to-create-windows-to-go-usb-of-windows-10/
method 1: Rufus.

Rufus is now at version 3.5 and worked nicely to create a Windows To Go
installation of Windows 10 Pro En 64-bit on a USB stick from a Windows 10
October 2018 ISO file that I downloaded from:
  https://www.microsoft.com/en-us/software-download/windows10ISO

The BIOS was downloaded from:
  https://download.lenovo.com/eol/index.html
for IdeaPad U350 Notebook:
  https://download.lenovo.com/UserFiles/Driver/en/Downloads%20and%20Drivers/U350/BIOS/1CCN26WW64.exe

I selected an SD card whith card reader as USB disk since it was the only
32 GB I had within reach, so creation of the Windows To Go installation
with Rufus took maybe more than an hour.  Then I could write the BIOS
installer right into the Windows To Go installation.  Booting the thing
on the laptop took a solid half hour (what on earth is Windows actually
doing while it says things like "Preparing Stuff"???), before it started
to ask about region keyboard and things, and a few minutes later I could
launch 1CCN26WW64.exe that completed without a glitch and rebooted.
When the reboot went into starting BIOS again, I pulled the stick,
and voila!  The machine had a new BIOS.

Alas, still no X!

Thanks for all valuable tips, everyone!
--

/ Raimo Niskanen, Erlang/OTP, Ericsson AB