Infinite spin when trying to burn a CD

classic Classic list List threaded Threaded
11 messages Options
Reply | Threaded
Open this post in threaded view
|

Infinite spin when trying to burn a CD

Jérôme Frgacic
Hi misc,

I encounter an annoying problem when I try to burn a CD on my laptop: my
CD spin forever and nothing is written on it. Worst: it's impossible for
me to eject the CD without rebooting.

Here is the command I use:

cdio -vv -f cd0c tao -d file.iso

and here is the output:

Features:
0x0000 Profile List (56 bytes of data)
     00 00 03 38|00 15 00 00 00 16 00 00 00 2b 00 00
     00 1b 00 00 00 1a 00 00 00 14 00 00 00 13 00 00
     00 12 00 00 00 11 00 00 00 10 00 00 00 0a 01 00
     00 09 00 00 00 08 00 00 00 02 00 00
     Profiles:
     0x0015 Dual Layer DVD-R using Sequential recording
     0x0016 Dual Layer DVD-R using Layer Jump recording
     0x002b DVD+Recordable Dual Layer
     0x001b DVD+Recordable
     0x001a DVD+ReWritable
     0x0014 Re-recordable DVD using Sequential recording
     0x0013 Re-recordable DVD using Restricted Overwrite
     0x0012 Re-writable DVD
     0x0011 Write once DVD using Sequential recording
     0x0010 Read only DVD
   * 0x000a Re-writable Compact Disc [Current Profile]
     0x0009 Write once Compact Disc
     0x0008 Read only Compact Disc
     0x0002 Re-writable, with removable media
0x0001 Core (8 bytes of data)
     00 01 0b 08|00 00 00 07 01 00 00 00
0x0002 Morphing (4 bytes of data)
     00 02 07 04|02 00 00 00
0x0003 Removable Medium (4 bytes of data)
     00 03 07 04|2b 00 00 00
0x0021 Incremental Streaming Writable (8 bytes of data)
     00 21 0d 08|3d 0f 00 01 07 00 00 00
0x0023 Formattable (8 bytes of data)
     00 23 09 08|00 00 00 00 00 00 00 00
0x002d CD Track at Once (TAO) (4 bytes of data)
     00 2d 09 04|46 00 3f 0f
0x002e CD Mastering (Session at Once) (4 bytes of data)
     00 2e 05 04|7f 00 0d 00
0x0037 CD-RW Media Write Support (4 bytes of data)
     00 37 01 04|00 0f 00 00
0x0100 Power Management
     01 00 03 00
0x0104 Microcode Upgrade (4 bytes of data)
     01 04 07 04|00 00 00 00
0x0105 Timeout (4 bytes of data)
     01 05 07 04|00 00 00 00
0x0107 Real Time Streaming (4 bytes of data)
     01 07 15 04|1f 00 00 00
0x0108 Drive Serial Number (16 bytes of data)
     01 08 03 10|52 38 56 30 36 47 56 43 37 30 30 32
     59 4c 20 20
track 01 'd' 00000031/00327168   0%

Nothing change after this. On dmesg output I obtain those errors.

cd0(ahci0:2:0): Check Condition (error 0x70) on opcode 0x1e
     SENSE KEY: Illegal Request

Does anyone can help me on this issue?
If it can help, I put my full dmesg output below.

Kind regards,


Jérôme FRGACIC

PS: I do not have subscribe to this mailing list, so please add me as a
recipient if you reply to this message.

OpenBSD 6.4 (GENERIC.MP) #8: Thu Mar 21 14:26:24 CET 2019
 
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1999732736 (1907MB)
avail mem = 1929854976 (1840MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xeb220 (42 entries)
bios0: vendor American Megatrends Inc. version "4.6.5" date 07/21/2012
bios0: CLEVO CO. W55xEU
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT HPET SSDT SSDT SSDT ASF! BGRT
acpi0: wakeup devices P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB4(S3)
USB5(S3) USB6(S3) USB7(S3) PXSX(S5) RP01(S4) PXSX(S5) RP03(S4) RP04(S4)
PXSX(S5) RP05(S4) PXSX(S5) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Celeron(R) CPU B830 @ 1.80GHz, 1796.22 MHz, 06-2a-07
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU B830 @ 1.80GHz, 1795.93 MHz, 06-2a-07
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,XSAVE,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP03)
acpiprt3 at acpi0: bus 3 (RP04)
acpiprt4 at acpi0: bus 4 (RP05)
acpiprt5 at acpi0: bus -1 (RP06)
acpiec0 at acpi0
acpicpu0 at acpi0: C2(500@80 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C2(500@80 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 120 degC
acpicmos0 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpibtn2 at acpi0: LID0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
"PNP0C14" at acpi0 not configured
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD0
cpu0: Enhanced SpeedStep 1796 MHz: speeds: 1800, 1700, 1600, 1500, 1400,
1300, 1200, 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 2000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi,
xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: VIA/0x8446, Intel/0x2806, using VIA/0x8446
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel Centrino Wireless-N 2230" rev 0xc4:
msi, MIMO 2T2R, BGN, address 84:a6:c8:2f:78:fd
ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 3
rtsx0 at pci3 dev 0 function 0 "Realtek RTL8411 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
re0 at pci3 dev 0 function 2 "Realtek 8168" rev 0x0a: RTL8411 (0x4880),
msi, address 00:90:f5:d8:8a:4e
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ppb3 at pci0 dev 28 function 4 "Intel 7 Series PCIE" rev 0xc4: msi
pci4 at ppb3 bus 4
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 2: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD5000LPCX-2, 01.0> SCSI3
0/direct fixed naa.50014ee65cfa28d2
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 2 lun 0: <TSSTcorp, CDDVDW SU-208BB, TC00> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic
2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.2, 0x1c0b1 0xa40000
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
umass0 at uhub0 port 1 configuration 1 interface 0 "Bookeen Cybook" rev
2.00/2.30 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <USB 2.0, USB Flash Driver, 0100> SCSI2
0/direct removable
sd1: 6324MB, 512 bytes/sector, 12951552 sectors
sd2 at scsibus2 targ 1 lun 1: <USB 2.0, USB Flash Driver, 0100> SCSI2
0/direct removable
uhidev0 at uhub0 port 2 configuration 1 interface 0 "SIGMACHIP Usb
Mouse" rev 1.10/1.10 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 5 buttons, Z dir
wsmouse1 at ums0 mux 0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (74c1e488426c049f.a) swap on sd0b dump on sd0b
cd0(ahci0:2:0): Check Condition (error 0x70) on opcode 0x1e
     SENSE KEY: Illegal Request
cd0(ahci0:2:0): Check Condition (error 0x70) on opcode 0x1e
     SENSE KEY: Illegal Request
error: [drm:pid90184:intel_pipe_update_start] *ERROR* Potential atomic
update failure on pipe A
error: [drm:pid90184:intel_pipe_update_start] *ERROR* Potential atomic
update failure on pipe A

Reply | Threaded
Open this post in threaded view
|

Re: Infinite spin when trying to burn a CD

Maurice McCarthy-3
On 23/03/2019, Jérôme FRGACIC <[hidden email]> wrote:

> Hi misc,
>
> I encounter an annoying problem when I try to burn a CD on my laptop: my
> CD spin forever and nothing is written on it. Worst: it's impossible for
> me to eject the CD without rebooting.
>
> Here is the command I use:
>
> cdio -vv -f cd0c tao -d file.iso
>

# cdio -f /dev/rcd0c tao -s 1 file.iso

Maybe? Raw device and slow speed

Reply | Threaded
Open this post in threaded view
|

Re: Infinite spin when trying to burn a CD

Jérôme Frgacic
Thanks for your reply.

> # cdio -f /dev/rcd0c tao -s 1 file.iso
>
> Maybe? Raw device and slow speed

I've try it, but unfortunetly it doesn't change anything, nothing is
written on the disk and it spins forever.

Nevertheless, after further investigation, it seems that the problem
only appear if the ISO image has a size greater than ~512k... I can
blank a CD, write small ISO images (~512ko max), but if I try to write
anything else, I got a CD that spin indefinitly without the possibility
to eject it.

Reply | Threaded
Open this post in threaded view
|

Re: Infinite spin when trying to burn a CD

Maurice McCarthy-3
I never looked at your dmesg earlier. These lines

cd0(ahci0:2:0): Check Condition (error 0x70) on opcode 0x1e
    SENSE KEY: Illegal Request

suggest the Openbsd system finds something wrong with your hardware.
I'm not clever enough to speculate further. Sorry.

Reply | Threaded
Open this post in threaded view
|

Re: Infinite spin when trying to burn a CD

Markus Rosjat
Hi,

might not to much help but

Am 26.03.2019 um 14:57 schrieb Maurice McCarthy:
> I never looked at your dmesg earlier. These lines
>
> cd0(ahci0:2:0): Check Condition (error 0x70) on opcode 0x1e
>      SENSE KEY: Illegal Request
>

the opcode is for the cdb prevent allow media removal so I assume your
hardware got a problem with the cdb send by the software so it might be
in a state where it still wants to read/write stuff.

if you really want to figure out what the sense code or the check
condition error means you have to read up sbc specification on t10.org i
guess


> suggest the Openbsd system finds something wrong with your hardware.
> I'm not clever enough to speculate further. Sorry.
>

regards
--
Markus Rosjat    fon: +49 351 8107224    mail: [hidden email]

G+H Webservice GbR Gorzolla, Herrmann
Königsbrücker Str. 70, 01099 Dresden

http://www.ghweb.de
fon: +49 351 8107220   fax: +49 351 8107227

Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before
you print it, think about your responsibility and commitment to the
ENVIRONMENT

Reply | Threaded
Open this post in threaded view
|

Re: Infinite spin when trying to burn a CD

Markus Rosjat
sorry it might got a bit confusing

Am 26.03.2019 um 15:41 schrieb Markus Rosjat:

>> cd0(ahci0:2:0): Check Condition (error 0x70) on opcode 0x1e
>>      SENSE KEY: Illegal Request
>>
>
> the opcode is for the cdb prevent allow media removal so I assume your
> hardware got a problem with the cdb send by the software so it might be
> in a state where it still wants to read/write stuff.

it means the optcode does alllow or prevent media removal it depends on
the prevent bits in the cdb but you basically just have a 00 for allow
or a 01 for prevent in the cdb. Anyway since sense already told you the
request is illegal you have to figure out what came befor the removal
request so you might get a clue in what state the hardware is still.

--
Markus Rosjat    fon: +49 351 8107224    mail: [hidden email]

G+H Webservice GbR Gorzolla, Herrmann
Königsbrücker Str. 70, 01099 Dresden

http://www.ghweb.de
fon: +49 351 8107220   fax: +49 351 8107227

Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before
you print it, think about your responsibility and commitment to the
ENVIRONMENT

Reply | Threaded
Open this post in threaded view
|

Re: Infinite spin when trying to burn a CD

Edgar Pettijohn III-2
In reply to this post by Jérôme Frgacic

On Mar 26, 2019 9:41 AM, Markus Rosjat <[hidden email]> wrote:

>
> Hi,
>
> might not to much help but
>
> Am 26.03.2019 um 14:57 schrieb Maurice McCarthy:
> > I never looked at your dmesg earlier. These lines
> >
> > cd0(ahci0:2:0): Check Condition (error 0x70) on opcode 0x1e
> >      SENSE KEY: Illegal Request
> >
>
> the opcode is for the cdb prevent allow media removal so I assume your
> hardware got a problem with the cdb send by the software so it might be
> in a state where it still wants to read/write stuff.
>
> if you really want to figure out what the sense code or the check
> condition error means you have to read up sbc specification on t10.org i
> guess
>
>
> > suggest the Openbsd system finds something wrong with your hardware.
> > I'm not clever enough to speculate further. Sorry.
> >
>
> regards
> --
> Markus Rosjat    fon: +49 351 8107224    mail: [hidden email]
>
> G+H Webservice GbR Gorzolla, Herrmann
> Königsbrücker Str. 70, 01099 Dresden
>
> http://www.ghweb.de
> fon: +49 351 8107220   fax: +49 351 8107227
>
> Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before
> you print it, think about your responsibility and commitment to the
> ENVIRONMENT
>

Have you tried cdrecord from ports? I haven't burnt a CD in awhile but last time I did I couldn't get cdio to work but cdrecord would.

Reply | Threaded
Open this post in threaded view
|

Re: Infinite spin when trying to burn a CD

Jérôme Frgacic
In reply to this post by Jérôme Frgacic
Thanks for all your replies.

> it means the optcode does alllow or prevent media removal it depends on
> the prevent bits in the cdb but you basically just have a 00 for allow
> or a 01 for prevent in the cdb.  Anyway since sense already told you the
> request is illegal you have to figure out what came befor the removal
> request so you might get a clue in what state the hardware is still.

Thanks for those informations. Unfortunetly, I don't have more
informations or error than those for the moment to determine what happen
exactly.

> Have you tried cdrecord from ports? I haven't burnt a CD in awhile but last
> time I did I couldn't get cdio to work but cdrecord would.

I've tried cdrecord too, but I have the same problem. More precisely, it
quits because it encounters an error, but the CD is still spining forever.

I put the output of cdrecord at the end, just in case it can help, but
since it seems to be a hardware problem, I suppose there is no easy
solutions (except changing it, of course). ^^"

Kind regards,


Jérôme

write track data: error after 552960 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable
error
CDB:  00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error

CDB:  35 00 00 00 00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 120s
Trouble flushing the cache
Writing  time:    5.115s
Average write speed 860.1x.
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd:
retryable error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.009s timeout 480s
cmd finished after 0.009s timeout 480s
cdrecord: faio_wait_on_buffer for writer timed out.
cdrecord: Input/output error. prevent/allow medium removal: scsi
sendcmd: retryable error
CDB:  1E 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
cdrecord: Cannot fixate disk.
Fixating time:  466.776s
cdrecord: Input/output error. prevent/allow medium removal: scsi
sendcmd: retryable error
CDB:  1E 00 00 00 00 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
cdrecord: fifo had 77 puts and 10 gets.
cdrecord: fifo was 0 times empty and 2 times full, min fill was 89%.

Reply | Threaded
Open this post in threaded view
|

Re: Infinite spin when trying to burn a CD

Jason McIntyre-2
On Tue, Mar 26, 2019 at 10:45:40PM +0100, J??r??me FRGACIC wrote:

> Thanks for all your replies.
>
> > it means the optcode does alllow or prevent media removal it depends on
> > the prevent bits in the cdb but you basically just have a 00 for allow
> > or a 01 for prevent in the cdb.  Anyway since sense already told you the
> > request is illegal you have to figure out what came befor the removal
> > request so you might get a clue in what state the hardware is still.
>
> Thanks for those informations. Unfortunetly, I don't have more
> informations or error than those for the moment to determine what happen
> exactly.
>
> > Have you tried cdrecord from ports? I haven't burnt a CD in awhile but last
> > time I did I couldn't get cdio to work but cdrecord would.
>
> I've tried cdrecord too, but I have the same problem. More precisely, it
> quits because it encounters an error, but the CD is still spining forever.
>
> I put the output of cdrecord at the end, just in case it can help, but
> since it seems to be a hardware problem, I suppose there is no easy
> solutions (except changing it, of course). ^^"
>
> Kind regards,
>
>
> J??r??me
>

hi. i don;t think it's a hardware error - i have a cd/dvd writer that
behaves in a similar fashion:

        cd0 at scsibus1 targ 1 lun 0: <TSSTcorp, DVD+-RW TS-U633J, D400> ATAPI 5/cdrom removable

i can reproduce the errors you get if i try to write a cd on it. it's
not something i really do, so i never bothered (though i also suspected
a hardware error ;)

jmc

Reply | Threaded
Open this post in threaded view
|

Re: Infinite spin when trying to burn a CD

Markus Rosjat
In reply to this post by Jérôme Frgacic
Hi,

for you output ...

Am 26.03.2019 um 22:45 schrieb Jérôme FRGACIC:

> write track data: error after 552960 bytes
> cdrecord: A write error occured.
> cdrecord: Please properly read the error message above.
> cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable
> error
> CDB:  00 00 00 00 00 00
> status: 0x0 (GOOD STATUS)
> cmd finished after 0.000s timeout 40s

test unit ready checks if the device is ready to do what you want it to do.

> cdrecord: Input/output error. flush cache: scsi sendcmd: retryable error
> CDB:  35 00 00 00 00 00 00 00 00 00
> status: 0x0 (GOOD STATUS)
> cmd finished after 0.000s timeout 120s
> Trouble flushing the cache
> Writing  time:    5.115s
> Average write speed 860.1x.
> Fixating...

this cdb tries to sync the cache and it seems to have a prob here, the
good status indecates that the cdb was recieved by the device after that
it seems to get in trouble

> cdrecord: Input/output error. close track/session: scsi sendcmd:
> retryable error
> CDB:  5B 00 02 00 00 00 00 00 00 00
> status: 0x0 (GOOD STATUS)
> cmd finished after 0.009s timeout 480s
> cmd finished after 0.009s timeout 480s

this cdb tries to close the track session i dont know why you get a cmd
finised twice here maybe its related to the cache problem.

> cdrecord: faio_wait_on_buffer for writer timed out.
> cdrecord: Input/output error. prevent/allow medium removal: scsi
> sendcmd: retryable error
> CDB:  1E 00 00 00 00 00
> status: 0x0 (GOOD STATUS)
> cmd finished after 0.000s timeout 40s

here you have your cdb for removing the media again

> cdrecord: Cannot fixate disk.
> Fixating time:  466.776s
> cdrecord: Input/output error. prevent/allow medium removal: scsi
> sendcmd: retryable error
> CDB:  1E 00 00 00 00 00
> status: 0x0 (GOOD STATUS)
> cmd finished after 0.000s timeout 40s

and once again  because he could fixate it before i guess

> cdrecord: fifo had 77 puts and 10 gets.
> cdrecord: fifo was 0 times empty and 2 times full, min fill was 89%.
>

so this is what happens by the log why it happend i cant tell by this
output but again the trouble starts with syncing the cache i guess.

regards
--
Markus Rosjat    fon: +49 351 8107224    mail: [hidden email]

G+H Webservice GbR Gorzolla, Herrmann
Königsbrücker Str. 70, 01099 Dresden

http://www.ghweb.de
fon: +49 351 8107220   fax: +49 351 8107227

Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before
you print it, think about your responsibility and commitment to the
ENVIRONMENT

Reply | Threaded
Open this post in threaded view
|

Re: Infinite spin when trying to burn a CD

Florian Viehweger
In reply to this post by Jérôme Frgacic
Have you tried different media?

I've seen drives freaking out similarly on numerous occasions because of shady media.

Of not, try a different brand, especially when you are using CDs from your local supermarket. Also try a different type, writable - rewritable.

--
Greetings,

Florian Viehweger