IPsec performance regression between 6.3 and 6.4

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

IPsec performance regression between 6.3 and 6.4

pierre1.bardou
Hello,

I'm currently doing some IPsec performance testing between OpenBSD 6.3 and 6.5.
Dmesg and ipsec.conf is below for information.

Testing with iperf3 and 1500B packets, throughput drops around 1/3, from 919 Mbps to 623 Mbps.
I also tried 6.4, which has similar perfomance to 6.5.
I went through plus64.html without finding a change that could explain this.


Could someone explain me what caused such a performance drop ?
Is there any solutions or plans to get the original performance back ?

Thank you


root@bsdWAN ~ # cat /etc/ipsec.conf
# Conf transport
ike esp transport proto gre \
  from 192.168.3.254 to 192.168.3.1 peer 192.168.3.1 \
  main auth hmac-sha2-256 enc aes-256 group modp1024 lifetime 86400 \
  quick auth hmac-sha2-256 enc aes-256 group modp1024 lifetime 28800 \
  psk "mekmitasdigoat"

root@bsdWAN ~ # dmesg
OpenBSD 6.5 (GENERIC.MP) #2: Tue May 14 10:19:35 UTC 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8395776000 (8006MB)
avail mem = 8131694592 (7754MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x8ef68000 (45 entries)
bios0: vendor Dell Inc. version "1.4.5" date 08/09/2016
bios0: Dell Inc. PowerEdge R330
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP BOOT SSDT SLIC HPET LPIT APIC MCFG WDAT SSDT DBGP DBG2 SSDT SSDT SSDT SSDT SSDT SSDT PRAD HEST BERT ERST EINJ DMAR FPDT
acpi0: wakeup devices PEGP(S0) PEG0(S0) PEGP(S0) PEG1(S0) PEGP(S0) PEG2(S0) XHC_(S0) XDCI(S0) PXSX(S0) RP01(S0) PXSX(S0) RP02(S0) PXSX(S0) RP03(S0) PXSX(S0) RP04(S0) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz, 3293.54 MHz, 06-5e-03
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz, 3292.34 MHz, 06-5e-03
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz, 3292.34 MHz, 06-5e-03
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz, 3292.34 MHz, 06-5e-03
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt0: no apic found for irq 32
acpiprt0: no apic found for irq 33
acpiprt0: no apic found for irq 34
acpiprt1 at acpi0: bus 1 (PEG0)
acpiprt2 at acpi0: bus 2 (PEG1)
acpiprt3 at acpi0: bus 3 (PEG2)
acpiprt4 at acpi0: bus -1 (RP01)
acpiprt5 at acpi0: bus -1 (RP02)
acpiprt6 at acpi0: bus -1 (RP03)
acpiprt7 at acpi0: bus -1 (RP04)
acpiprt8 at acpi0: bus -1 (RP05)
acpiprt9 at acpi0: bus -1 (RP06)
acpiprt10 at acpi0: bus -1 (RP07)
acpiprt11 at acpi0: bus -1 (RP08)
acpiprt12 at acpi0: bus 4 (RP09)
acpiprt13 at acpi0: bus -1 (RP10)
acpiprt14 at acpi0: bus 5 (RP11)
acpiprt15 at acpi0: bus -1 (RP12)
acpiprt16 at acpi0: bus -1 (RP13)
acpiprt17 at acpi0: bus -1 (RP14)
acpiprt18 at acpi0: bus -1 (RP15)
acpiprt19 at acpi0: bus -1 (RP16)
acpiprt20 at acpi0: bus -1 (RP17)
acpiprt21 at acpi0: bus -1 (RP18)
acpiprt22 at acpi0: bus -1 (RP19)
acpiprt23 at acpi0: bus -1 (RP20)
acpicpu0 at acpi0: C1(@1 halt!)
acpicpu1 at acpi0: C1(@1 halt!)
acpicpu2 at acpi0: C1(@1 halt!)
acpicpu3 at acpi0: C1(@1 halt!)
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
"PNP0C33" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
ipmi at mainbus0 not configured
memory map conflict 0xe00fd000/0x1000
memory map conflict 0xfe000000/0x11000
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v5 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel Core 6G PCIE" rev 0x07: msi
pci1 at ppb0 bus 1
1:0:0: mem address conflict 0xfff80000/0x80000
1:0:1: mem address conflict 0xfff80000/0x80000
ix0 at pci1 dev 0 function 0 "Intel X540T" rev 0x01: msi, address a0:36:9f:cb:00:fc
ix1 at pci1 dev 0 function 1 "Intel X540T" rev 0x01: msi, address a0:36:9f:cb:00:fe
ppb1 at pci0 dev 1 function 1 "Intel Core 6G PCIE" rev 0x07: msi
pci2 at ppb1 bus 2
2:0:0: mem address conflict 0xfffc0000/0x40000
2:0:1: mem address conflict 0xfffc0000/0x40000
2:0:2: mem address conflict 0xfffc0000/0x40000
2:0:3: mem address conflict 0xfffc0000/0x40000
bge0 at pci2 dev 0 function 0 "Broadcom BCM5719" rev 0x01, unknown BCM5719 (0x5719001), APE firmware NCSI 1.3.16.0: msi, address 00:0a:f7:9b:90:04
brgphy0 at bge0 phy 1: BCM5719C 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 0 function 1 "Broadcom BCM5719" rev 0x01, unknown BCM5719 (0x5719001), APE firmware NCSI 1.3.16.0: msi, address 00:0a:f7:9b:90:05
brgphy1 at bge1 phy 2: BCM5719C 10/100/1000baseT PHY, rev. 0
bge2 at pci2 dev 0 function 2 "Broadcom BCM5719" rev 0x01, unknown BCM5719 (0x5719001), APE firmware NCSI 1.3.16.0: msi, address 00:0a:f7:9b:90:06
brgphy2 at bge2 phy 3: BCM5719C 10/100/1000baseT PHY, rev. 0
bge3 at pci2 dev 0 function 3 "Broadcom BCM5719" rev 0x01, unknown BCM5719 (0x5719001), APE firmware NCSI 1.3.16.0: msi, address 00:0a:f7:9b:90:07
brgphy3 at bge3 phy 4: BCM5719C 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 1 function 2 "Intel Core 6G PCIE" rev 0x07: msi
pci3 at ppb2 bus 3
mfii0 at pci3 dev 0 function 0 "Symbios Logic MegaRAID SAS3008" rev 0x02: msi
mfii0: "PERC H330 Adapter", firmware 25.5.0.0019
scsibus1 at mfii0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <DELL, PERC H330 Adp, 4.27> SCSI3 0/direct fixed naa.6847beb0d82d32001feaa67a21d08db4
sd0: 190208MB, 512 bytes/sector, 389545984 sectors
scsibus2 at mfii0: 256 targets
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
"Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
"Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 1 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi, AHCI 1.3.1
ahci0: port 4: 1.5Gb/s
scsibus3 at ahci0: 32 targets
cd0 at scsibus3 targ 4 lun 0: <HL-DT-ST, DVD+-RW GU90N, A3C0> ATAPI 5/cdrom removable
ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 4
4:0:0: mem address conflict 0xfffc0000/0x40000
4:0:1: mem address conflict 0xfffc0000/0x40000
bge4 at pci4 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0 (0x5720000), APE firmware NCSI 1.3.16.0: msi, address 10:98:36:a9:dc:99
brgphy4 at bge4 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0
bge5 at pci4 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0 (0x5720000), APE firmware NCSI 1.3.16.0: msi, address 10:98:36:a9:dc:9a
brgphy5 at bge5 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0
ppb4 at pci0 dev 29 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci5 at ppb4 bus 5
ppb5 at pci5 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
pci6 at ppb5 bus 6
ppb6 at pci6 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
pci7 at ppb6 bus 7
ppb7 at pci7 dev 0 function 0 "Renesas SH7758 PCIE-PCI" rev 0x00
pci8 at ppb7 bus 8
vga1 at pci8 dev 0 function 0 "Matrox MGA G200eR" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel C236 LPC" rev 0x31
"Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31: apic 2 int 16
iic0 at ichiic0
iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=c1 06=1c 07=22 08=00 words 00=00ef 01=0000 02=0000 03=0000 04=0000 05=c154 06=1c85 07=2221
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
uhub1 at uhub0 port 3 configuration 1 interface 0 "no manufacturer Gadget USB HUB" rev 2.00/0.00 addr 2
uhidev0 at uhub0 port 4 configuration 1 interface 0 "Avocent Dell 03R874" rev 1.10/1.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 4 configuration 1 interface 1 "Avocent Dell 03R874" rev 1.10/1.00 addr 3
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (2aaef25992267da5.a) swap on sd0b dump on sd0b

--
Cordialement,
Pierre BARDOU
 



_________________________________________________________________________________________________________________________

Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.

This message and its attachments may contain confidential or privileged information that may be protected by law;
they should not be distributed, used or copied without authorisation.
If you have received this email in error, please notify the sender and delete this message and its attachments.
As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
Thank you.

Reply | Threaded
Open this post in threaded view
|

Re: IPsec performance regression between 6.3 and 6.4

Patrick Wildt-3
Hi,

we recently found that the switch to constant-time AES has quite a heavy
impact on IPsec performance.  But since according to CVS that was part
of OpenBSD 6.2 already, it's probably something else.

https://github.com/openbsd/src/commit/d223d7cb85c1f2f705da547a0134b949655abe6a

Patrick

On Wed, Jul 17, 2019 at 12:26:31PM +0000, [hidden email] wrote:

> Hello,
>
> I'm currently doing some IPsec performance testing between OpenBSD 6.3 and 6.5.
> Dmesg and ipsec.conf is below for information.
>
> Testing with iperf3 and 1500B packets, throughput drops around 1/3, from 919 Mbps to 623 Mbps.
> I also tried 6.4, which has similar perfomance to 6.5.
> I went through plus64.html without finding a change that could explain this.
>
>
> Could someone explain me what caused such a performance drop ?
> Is there any solutions or plans to get the original performance back ?
>
> Thank you
>
>
> root@bsdWAN ~ # cat /etc/ipsec.conf
> # Conf transport
> ike esp transport proto gre \
>   from 192.168.3.254 to 192.168.3.1 peer 192.168.3.1 \
>   main auth hmac-sha2-256 enc aes-256 group modp1024 lifetime 86400 \
>   quick auth hmac-sha2-256 enc aes-256 group modp1024 lifetime 28800 \
>   psk "mekmitasdigoat"
>
> root@bsdWAN ~ # dmesg
> OpenBSD 6.5 (GENERIC.MP) #2: Tue May 14 10:19:35 UTC 2019
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8395776000 (8006MB)
> avail mem = 8131694592 (7754MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0x8ef68000 (45 entries)
> bios0: vendor Dell Inc. version "1.4.5" date 08/09/2016
> bios0: Dell Inc. PowerEdge R330
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S5
> acpi0: tables DSDT FACP BOOT SSDT SLIC HPET LPIT APIC MCFG WDAT SSDT DBGP DBG2 SSDT SSDT SSDT SSDT SSDT SSDT PRAD HEST BERT ERST EINJ DMAR FPDT
> acpi0: wakeup devices PEGP(S0) PEG0(S0) PEGP(S0) PEG1(S0) PEGP(S0) PEG2(S0) XHC_(S0) XDCI(S0) PXSX(S0) RP01(S0) PXSX(S0) RP02(S0) PXSX(S0) RP03(S0) PXSX(S0) RP04(S0) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 23999999 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz, 3293.54 MHz, 06-5e-03
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 24MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz, 3292.34 MHz, 06-5e-03
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz, 3292.34 MHz, 06-5e-03
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Xeon(R) CPU E3-1220 v5 @ 3.00GHz, 3292.34 MHz, 06-5e-03
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt0: no apic found for irq 32
> acpiprt0: no apic found for irq 33
> acpiprt0: no apic found for irq 34
> acpiprt1 at acpi0: bus 1 (PEG0)
> acpiprt2 at acpi0: bus 2 (PEG1)
> acpiprt3 at acpi0: bus 3 (PEG2)
> acpiprt4 at acpi0: bus -1 (RP01)
> acpiprt5 at acpi0: bus -1 (RP02)
> acpiprt6 at acpi0: bus -1 (RP03)
> acpiprt7 at acpi0: bus -1 (RP04)
> acpiprt8 at acpi0: bus -1 (RP05)
> acpiprt9 at acpi0: bus -1 (RP06)
> acpiprt10 at acpi0: bus -1 (RP07)
> acpiprt11 at acpi0: bus -1 (RP08)
> acpiprt12 at acpi0: bus 4 (RP09)
> acpiprt13 at acpi0: bus -1 (RP10)
> acpiprt14 at acpi0: bus 5 (RP11)
> acpiprt15 at acpi0: bus -1 (RP12)
> acpiprt16 at acpi0: bus -1 (RP13)
> acpiprt17 at acpi0: bus -1 (RP14)
> acpiprt18 at acpi0: bus -1 (RP15)
> acpiprt19 at acpi0: bus -1 (RP16)
> acpiprt20 at acpi0: bus -1 (RP17)
> acpiprt21 at acpi0: bus -1 (RP18)
> acpiprt22 at acpi0: bus -1 (RP19)
> acpiprt23 at acpi0: bus -1 (RP20)
> acpicpu0 at acpi0: C1(@1 halt!)
> acpicpu1 at acpi0: C1(@1 halt!)
> acpicpu2 at acpi0: C1(@1 halt!)
> acpicpu3 at acpi0: C1(@1 halt!)
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> acpicmos0 at acpi0
> acpibtn0 at acpi0: SLPB
> "PNP0C14" at acpi0 not configured
> "PNP0C33" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> ipmi at mainbus0 not configured
> memory map conflict 0xe00fd000/0x1000
> memory map conflict 0xfe000000/0x11000
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v5 Host" rev 0x07
> ppb0 at pci0 dev 1 function 0 "Intel Core 6G PCIE" rev 0x07: msi
> pci1 at ppb0 bus 1
> 1:0:0: mem address conflict 0xfff80000/0x80000
> 1:0:1: mem address conflict 0xfff80000/0x80000
> ix0 at pci1 dev 0 function 0 "Intel X540T" rev 0x01: msi, address a0:36:9f:cb:00:fc
> ix1 at pci1 dev 0 function 1 "Intel X540T" rev 0x01: msi, address a0:36:9f:cb:00:fe
> ppb1 at pci0 dev 1 function 1 "Intel Core 6G PCIE" rev 0x07: msi
> pci2 at ppb1 bus 2
> 2:0:0: mem address conflict 0xfffc0000/0x40000
> 2:0:1: mem address conflict 0xfffc0000/0x40000
> 2:0:2: mem address conflict 0xfffc0000/0x40000
> 2:0:3: mem address conflict 0xfffc0000/0x40000
> bge0 at pci2 dev 0 function 0 "Broadcom BCM5719" rev 0x01, unknown BCM5719 (0x5719001), APE firmware NCSI 1.3.16.0: msi, address 00:0a:f7:9b:90:04
> brgphy0 at bge0 phy 1: BCM5719C 10/100/1000baseT PHY, rev. 0
> bge1 at pci2 dev 0 function 1 "Broadcom BCM5719" rev 0x01, unknown BCM5719 (0x5719001), APE firmware NCSI 1.3.16.0: msi, address 00:0a:f7:9b:90:05
> brgphy1 at bge1 phy 2: BCM5719C 10/100/1000baseT PHY, rev. 0
> bge2 at pci2 dev 0 function 2 "Broadcom BCM5719" rev 0x01, unknown BCM5719 (0x5719001), APE firmware NCSI 1.3.16.0: msi, address 00:0a:f7:9b:90:06
> brgphy2 at bge2 phy 3: BCM5719C 10/100/1000baseT PHY, rev. 0
> bge3 at pci2 dev 0 function 3 "Broadcom BCM5719" rev 0x01, unknown BCM5719 (0x5719001), APE firmware NCSI 1.3.16.0: msi, address 00:0a:f7:9b:90:07
> brgphy3 at bge3 phy 4: BCM5719C 10/100/1000baseT PHY, rev. 0
> ppb2 at pci0 dev 1 function 2 "Intel Core 6G PCIE" rev 0x07: msi
> pci3 at ppb2 bus 3
> mfii0 at pci3 dev 0 function 0 "Symbios Logic MegaRAID SAS3008" rev 0x02: msi
> mfii0: "PERC H330 Adapter", firmware 25.5.0.0019
> scsibus1 at mfii0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <DELL, PERC H330 Adp, 4.27> SCSI3 0/direct fixed naa.6847beb0d82d32001feaa67a21d08db4
> sd0: 190208MB, 512 bytes/sector, 389545984 sectors
> scsibus2 at mfii0: 256 targets
> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
> "Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
> "Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 1 not configured
> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi, AHCI 1.3.1
> ahci0: port 4: 1.5Gb/s
> scsibus3 at ahci0: 32 targets
> cd0 at scsibus3 targ 4 lun 0: <HL-DT-ST, DVD+-RW GU90N, A3C0> ATAPI 5/cdrom removable
> ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
> pci4 at ppb3 bus 4
> 4:0:0: mem address conflict 0xfffc0000/0x40000
> 4:0:1: mem address conflict 0xfffc0000/0x40000
> bge4 at pci4 dev 0 function 0 "Broadcom BCM5720" rev 0x00, BCM5720 A0 (0x5720000), APE firmware NCSI 1.3.16.0: msi, address 10:98:36:a9:dc:99
> brgphy4 at bge4 phy 1: BCM5720C 10/100/1000baseT PHY, rev. 0
> bge5 at pci4 dev 0 function 1 "Broadcom BCM5720" rev 0x00, BCM5720 A0 (0x5720000), APE firmware NCSI 1.3.16.0: msi, address 10:98:36:a9:dc:9a
> brgphy5 at bge5 phy 2: BCM5720C 10/100/1000baseT PHY, rev. 0
> ppb4 at pci0 dev 29 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
> pci5 at ppb4 bus 5
> ppb5 at pci5 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
> pci6 at ppb5 bus 6
> ppb6 at pci6 dev 0 function 0 "Renesas SH7758 PCIE Switch" rev 0x00
> pci7 at ppb6 bus 7
> ppb7 at pci7 dev 0 function 0 "Renesas SH7758 PCIE-PCI" rev 0x00
> pci8 at ppb7 bus 8
> vga1 at pci8 dev 0 function 0 "Matrox MGA G200eR" rev 0x01
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 31 function 0 "Intel C236 LPC" rev 0x31
> "Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31: apic 2 int 16
> iic0 at ichiic0
> iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=c1 06=1c 07=22 08=00 words 00=00ef 01=0000 02=0000 03=0000 04=0000 05=c154 06=1c85 07=2221
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
> uhub1 at uhub0 port 3 configuration 1 interface 0 "no manufacturer Gadget USB HUB" rev 2.00/0.00 addr 2
> uhidev0 at uhub0 port 4 configuration 1 interface 0 "Avocent Dell 03R874" rev 1.10/1.00 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> uhidev1 at uhub0 port 4 configuration 1 interface 1 "Avocent Dell 03R874" rev 1.10/1.00 addr 3
> uhidev1: iclass 3/1, 3 report ids
> ums0 at uhidev1 reportid 1: 5 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
> uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
> vscsi0 at root
> scsibus4 at vscsi0: 256 targets
> softraid0 at root
> scsibus5 at softraid0: 256 targets
> root on sd0a (2aaef25992267da5.a) swap on sd0b dump on sd0b
>
> --
> Cordialement,
> Pierre BARDOU
>  
>
>
>
> _________________________________________________________________________________________________________________________
>
> Ce message et ses pieces jointes peuvent contenir des informations confidentielles ou privilegiees et ne doivent donc
> pas etre diffuses, exploites ou copies sans autorisation. Si vous avez recu ce message par erreur, veuillez le signaler
> a l'expediteur et le detruire ainsi que les pieces jointes. Les messages electroniques etant susceptibles d'alteration,
> Orange decline toute responsabilite si ce message a ete altere, deforme ou falsifie. Merci.
>
> This message and its attachments may contain confidential or privileged information that may be protected by law;
> they should not be distributed, used or copied without authorisation.
> If you have received this email in error, please notify the sender and delete this message and its attachments.
> As emails may be altered, Orange is not liable for messages that have been modified, changed or falsified.
> Thank you.
>