I need a little more Enlightenment

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

I need a little more Enlightenment

Rod Whitworth-3
Present machine (dmesg below) is really "fun" to work with X but that
will go away with current. I found that out by installing the Jan 9
snap onto a USB stick.

I'll start running that or later snaps when my new custom built T
series laptop arrives.
Meanwhile I decided to try running Enlightenment from the 5.2 package.

fvwm and icewm work without problems (other than the blind vcons once X
is loaded.)

E installs without whining.

I changed xinitrc to remove the icewm setting and added:-
exec enlightenment_start

startx gives a very dark screen and a mouse cursor pops up in the
centre. Then the screen has a short flash of white all over before the
dark screen comes back without the mouse cursor.

A cluebat would maybe better that more enlightenment of the digital
variety.....

I wanted to get a bit of experience before the new Tpad gets to work
testing the new package that Stefan (stsp@ ) is putting so much work
into.

*** NOTE *** Please DO NOT CC me. I <am> subscribed to the list.
Mail to the sender address that does not originate at the list server
is tarpitted. The reply-to: address is provided for those who feel
compelled to reply off list. Thankyou.

Rod/

dmesg follows:
<BOF>
OpenBSD 5.2 (GENERIC.MP) #339: Wed Aug  1 10:13:24 MDT 2012
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz ("GenuineIntel"
686-class) 2.50 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAI
T,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AE
S,XSAVE,AVX,LAHF
real mem  = 3133054976 (2987MB)
avail mem = 3071000576 (2928MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/30/11, BIOS32 rev. 0 @
0xfc000, SMBIOS rev. 2.6 @ 0xe0830 (71 entries)
bios0: vendor LENOVO version "8NET32WW (1.16 )" date 12/01/2011
bios0: LENOVO 1298CTO
acpi0 at bios0: rev 4
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC SSDT SSDT UEFI UEFI
UEFI
acpi0: wakeup devices P0P1(S4) EHC1(S3) EHC2(S3) HDEF(S4) PXSX(S4)
RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) BLAN(S4) PXSX(S4) RP07(S4) PXSX(S4)
RP08(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEG2(S4) PEG3(S4) LID_(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz ("GenuineIntel"
686-class) 2.50 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAI
T,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AE
S,XSAVE,AVX,LAHF
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz ("GenuineIntel"
686-class) 2.50 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAI
T,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AE
S,XSAVE,AVX,LAHF
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz ("GenuineIntel"
686-class) 2.50 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,
CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAI
T,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,AE
S,XSAVE,AVX,LAHF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP01)
acpiprt3 at acpi0: bus 2 (RP02)
acpiprt4 at acpi0: bus 3 (RP03)
acpiprt5 at acpi0: bus -1 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus 8 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpicpu2 at acpi0: C2, C1, PSS
acpicpu3 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT1 model "42T4951" serial 10775 type LION oem
"LGC"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xee00
cpu0: Enhanced SpeedStep 2495 MHz: speeds: 2501, 2500, 2000, 1800,
1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2
int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04:
msi
azalia0: codecs: Conexant/0x506e, Intel/0x2805, using Conexant/0x506e
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: apic 2
int 16
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: apic 2
int 17
pci2 at ppb1 bus 2
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 1000" rev 0x00: msi,
MIMO 1T2R, BGS, address 74:e5:0b:a1:93:90
ppb2 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb4: apic 2
int 18
pci3 at ppb2 bus 3
"Realtek RTS5209 Card Reader" rev 0x01 at pci3 dev 0 function 0 not
configured
sdhc0 at pci3 dev 0 function 1 "Realtek RTS5209 Card Reader" rev 0x01:
apic 2 int 19
sdmmc0 at sdhc0
ppb3 at pci0 dev 28 function 5 "Intel 6 Series PCIE" rev 0xb4: apic 2
int 17
pci4 at ppb3 bus 8
alc0 at pci4 dev 0 function 0 "Attansic Technology L1D" rev 0xc0: msi,
address 04:7d:7b:3e:a5:8e
atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 0
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2
int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM65 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi,
AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, HITACHI HTS54505, GG2Z> SCSI3
0/direct fixed naa.5000cca654d97545
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic
2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (7e5c966bc18f403e.a) swap on sd0b dump on sd0b
umass0 at uhub3 port 2 configuration 1 interface 0 "Verbatim STORE N
GO" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <Verbatim, STORE N GO, 1.00> SCSI2
0/direct removable serial.18a50304000000007B0F
sd1: 3824MB, 512 bytes/sector, 7831552 sectors
<EOF>
*** NOTE *** Please DO NOT CC me. I <am> subscribed to the list.
Mail to the sender address that does not originate at the list server is tarpitted. The reply-to: address is provided for those who feel compelled to reply off list. Thankyou.

Rod/
---
This life is not the real thing.
It is not even in Beta.
If it was, then OpenBSD would already have a man page for it.

Reply | Threaded
Open this post in threaded view
|

Re: I need a little more Enlightenment

Stefan Sperling-8
On Tue, Jan 15, 2013 at 04:35:24PM +1100, Rod Whitworth wrote:
> E installs without whining.
>
> I changed xinitrc to remove the icewm setting and added:-
> exec enlightenment_start
>
> startx gives a very dark screen and a mouse cursor pops up in the
> centre. Then the screen has a short flash of white all over before the
> dark screen comes back without the mouse cursor.

Hmmm... no idea what the problem could be. Sounds like the X server
is crashing. Please show /var/log/Xorg.0.log, too.

> dmesg follows:

The dmesg you quoted is from 5.2. Please show the -current dmesg from
the USB stick install which actually has the problem.

I have another unrelated question about the machine:

> "Realtek RTS5209 Card Reader" rev 0x01 at pci3 dev 0 function 0 not
> configured
> sdhc0 at pci3 dev 0 function 1 "Realtek RTS5209 Card Reader" rev 0x01:
> apic 2 int 19
> sdmmc0 at sdhc0

Does the card reader work in 5.2? Does it work in -current?

Reply | Threaded
Open this post in threaded view
|

Re: I need a little more Enlightenment

Rod Whitworth-3
On Tue, 15 Jan 2013 11:33:54 +0100, Stefan Sperling wrote:

>On Tue, Jan 15, 2013 at 04:35:24PM +1100, Rod Whitworth wrote:
>> E installs without whining.
>>
>> I changed xinitrc to remove the icewm setting and added:-
>> exec enlightenment_start
>>
>> startx gives a very dark screen and a mouse cursor pops up in the
>> centre. Then the screen has a short flash of white all over before the
>> dark screen comes back without the mouse cursor.
>
>Hmmm... no idea what the problem could be. Sounds like the X server
>is crashing. Please show /var/log/Xorg.0.log, too.

Here it is:
=====
[   206.914] (--) checkDevMem: using aperture driver /dev/xf86
[   206.927] (--) Using wscons driver on /dev/ttyC4 in pcvt
compatibility mode (version 3.32)
[   208.018]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[   208.018] X Protocol Version 11, Revision 0
[   208.018] Build Operating System: OpenBSD 5.2 i386
[   208.018] Current Operating System: OpenBSD red.witworx.com 5.2
GENERIC.MP#339 i386
[   208.018] Build Date: 22 July 2012  10:21:16PM
[   208.018]  
[   208.018] Current version of pixman: 0.24.4
[   208.019] Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   208.019] Markers: (--) probed, (**) from config file, (==) default
setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   208.019] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jan 16
10:12:12 2013
[   208.074] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[   208.083] (==) No Layout section.  Using the first Screen section.
[   208.084] (==) No screen section available. Using defaults.
[   208.084] (**) |-->Screen "Default Screen Section" (0)
[   208.084] (**) |   |-->Monitor "<default monitor>"
[   208.084] (==) No monitor specified for screen "Default Screen
Section".
        Using a default monitor configuration.
[   208.084] (==) Disabling SIGIO handlers for input devices
[   208.084] (==) Automatically adding devices
[   208.084] (==) Automatically enabling devices
[   208.249] (==) FontPath set to:
        /usr/X11R6/lib/X11/fonts/misc/,
        /usr/X11R6/lib/X11/fonts/TTF/,
        /usr/X11R6/lib/X11/fonts/OTF/,
        /usr/X11R6/lib/X11/fonts/Type1/,
        /usr/X11R6/lib/X11/fonts/100dpi/,
        /usr/X11R6/lib/X11/fonts/75dpi/
[   208.249] (==) ModulePath set to "/usr/X11R6/lib/modules"
[   208.249] (II) The server relies on wscons to provide the list of
input devices.
        If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[   208.261] (II) Loader magic: 0x3c021020
[   208.261] (II) Module ABI versions:
[   208.261] X.Org ANSI C Emulation: 0.4
[   208.261] X.Org Video Driver: 12.0
[   208.261] X.Org XInput driver : 16.0
[   208.261] X.Org Server Extension : 6.0
[   208.263] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ee rev 9, Mem @
0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64
[   208.263] (II) LoadModule: "extmod"
[   208.291] (II) Loading
/usr/X11R6/lib/modules/extensions/libextmod.so
[   208.301] (II) Module extmod: vendor="X.Org Foundation"
[   208.301] compiled for 1.12.2, module version = 1.0.0
[   208.301] Module class: X.Org Server Extension
[   208.301] ABI class: X.Org Server Extension, version 6.0
[   208.301] (II) Loading extension MIT-SCREEN-SAVER
[   208.301] (II) Loading extension XFree86-VidModeExtension
[   208.301] (II) Loading extension XFree86-DGA
[   208.301] (II) Loading extension DPMS
[   208.301] (II) Loading extension XVideo
[   208.301] (II) Loading extension XVideo-MotionCompensation
[   208.301] (II) Loading extension X-Resource
[   208.301] (II) LoadModule: "dbe"
[   208.302] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[   208.309] (II) Module dbe: vendor="X.Org Foundation"
[   208.309] compiled for 1.12.2, module version = 1.0.0
[   208.309] Module class: X.Org Server Extension
[   208.309] ABI class: X.Org Server Extension, version 6.0
[   208.309] (II) Loading extension DOUBLE-BUFFER
[   208.309] (II) LoadModule: "glx"
[   208.309] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[   208.320] (II) Module glx: vendor="X.Org Foundation"
[   208.320] compiled for 1.12.2, module version = 1.0.0
[   208.320] ABI class: X.Org Server Extension, version 6.0
[   208.320] (==) AIGLX enabled
[   208.321] (II) Loading extension GLX
[   208.321] (II) LoadModule: "record"
[   208.321] (II) Loading
/usr/X11R6/lib/modules/extensions/librecord.so
[   208.322] (II) Module record: vendor="X.Org Foundation"
[   208.322] compiled for 1.12.2, module version = 1.13.0
[   208.322] Module class: X.Org Server Extension
[   208.322] ABI class: X.Org Server Extension, version 6.0
[   208.322] (II) Loading extension RECORD
[   208.322] (II) LoadModule: "dri"
[   208.322] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[   208.344] (II) Module dri: vendor="X.Org Foundation"
[   208.344] compiled for 1.12.2, module version = 1.0.0
[   208.344] ABI class: X.Org Server Extension, version 6.0
[   208.344] (II) Loading extension XFree86-DRI
[   208.344] (II) LoadModule: "dri2"
[   208.345] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[   208.345] (II) Module dri2: vendor="X.Org Foundation"
[   208.345] compiled for 1.12.2, module version = 1.2.0
[   208.345] ABI class: X.Org Server Extension, version 6.0
[   208.345] (II) Loading extension DRI2
[   208.352] (==) Matched intel as autoconfigured driver 0
[   208.352] (==) Matched vesa as autoconfigured driver 1
[   208.352] (==) Assigned the driver to the xf86ConfigLayout
[   208.352] (II) LoadModule: "intel"
[   208.353] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[   208.380] (II) Module intel: vendor="X.Org Foundation"
[   208.380] compiled for 1.12.2, module version = 2.12.0
[   208.380] Module class: X.Org Video Driver
[   208.380] ABI class: X.Org Video Driver, version 12.0
[   208.381] (II) LoadModule: "vesa"
[   208.381] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[   208.391] (II) Module vesa: vendor="X.Org Foundation"
[   208.391] compiled for 1.12.2, module version = 2.3.1
[   208.391] Module class: X.Org Video Driver
[   208.391] ABI class: X.Org Video Driver, version 12.0
[   208.391] (II) intel: Driver for Intel Integrated Graphics Chipsets:
i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview
G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale,
Arrandale,
        Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
        Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
        Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
        Sandybridge Server
[   208.391] (II) VESA: driver for VESA chipsets: vesa
[   208.391] (WW) Falling back to old probe method for vesa
[   208.391] (II) Loading sub module "vgahw"
[   208.391] (II) LoadModule: "vgahw"
[   208.395] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[   208.408] (II) Module vgahw: vendor="X.Org Foundation"
[   208.408] compiled for 1.12.2, module version = 0.1.0
[   208.408] ABI class: X.Org Video Driver, version 12.0
[   208.408] (II) Loading sub module "ramdac"
[   208.408] (II) LoadModule: "ramdac"
[   208.408] (II) Module "ramdac" already built-in
[   208.408] drmOpenDevice: node name is /dev/drm0
[   208.408] drmOpenDevice: open result is 10, (OK)
[   208.408] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[   208.408] drmOpenDevice: node name is /dev/drm0
[   208.408] drmOpenDevice: open result is 10, (OK)
[   208.408] drmOpenByBusid: drmOpenMinor returns 10
[   208.408] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[   208.408] (II) intel(0): Creating default Display subsection in
Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[   208.408] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   208.408] (==) intel(0): RGB weight 888
[   208.408] (==) intel(0): Default visual is TrueColor
[   208.409] (II) intel(0): Integrated Graphics Chipset: Intel(R)
Sandybridge Mobile (GT2+)
[   208.409] (--) intel(0): Chipset: "Sandybridge Mobile (GT2+)"
[   208.409] (--) intel(0): Linear framebuffer at 0xC0000000
[   208.409] (--) intel(0): IO registers at addr 0xD0000000 size
4194304
[   208.409] (WW) intel(0): libpciaccess reported 0 rom size, guessing
64kB
[   208.409] (II) intel(0): No SDVO device is found in VBT
[   208.410] (II) intel(0): 2 display pipes available.
[   208.410] (II) Loading sub module "ddc"
[   208.410] (II) LoadModule: "ddc"
[   208.410] (II) Module "ddc" already built-in
[   208.410] (II) Loading sub module "i2c"
[   208.410] (II) LoadModule: "i2c"
[   208.410] (II) Module "i2c" already built-in
[   208.410] (II) intel(0): Output VGA has no monitor section
[   208.410] (II) intel(0): Output LVDS has no monitor section
[   208.410] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
[   208.410] (II) intel(0): Attempting to determine panel fixed mode.
[   208.410] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at
address 0xA0.
[   208.466] (II) intel(0): EDID for output LVDS
[   208.466] (II) intel(0): Manufacturer: LGD  Model: 314  Serial#: 0
[   208.466] (II) intel(0): Year: 2011  Week: 0
[   208.466] (II) intel(0): EDID Version: 1.3
[   208.466] (II) intel(0): Digital Display Input
[   208.466] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 16
[   208.466] (II) intel(0): Gamma: 2.20
[   208.466] (II) intel(0): No DPMS capabilities specified
[   208.466] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[   208.466] (II) intel(0): First detailed timing is preferred mode
[   208.466] (II) intel(0): redX: 0.577 redY: 0.347   greenX: 0.338
greenY: 0.561
[   208.466] (II) intel(0): blueX: 0.159 blueY: 0.127   whiteX: 0.313
whiteY: 0.329
[   208.466] (II) intel(0): Manufacturer's mask: 0
[   208.466] (II) intel(0): Supported detailed timing:
[   208.466] (II) intel(0): clock: 69.7 MHz   Image Size:  293 x 165 mm
[   208.466] (II) intel(0): h_active: 1366  h_sync: 1398  h_sync_end
1430 h_blank_end 1478 h_border: 0
[   208.466] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776
v_blanking: 786 v_border: 0
[   208.466] (II) intel(0):  LG Display
[   208.466] (II) intel(0):  LP133WH2-TLM7
[   208.466] (II) intel(0): EDID (in hex):
[   208.466] (II) intel(0): 00ffffffffffff0030e4140300000000
[   208.466] (II) intel(0): 00150103801d10780afae59358568f28
[   208.466] (II) intel(0): 20505400000001010101010101010101
[   208.466] (II) intel(0): 0101010101013a1b5670500012302020
[   208.466] (II) intel(0): 350025a5100000190000000000000000
[   208.466] (II) intel(0): 00000000000000000000000000fe004c
[   208.466] (II) intel(0): 4720446973706c61790a2020000000fe
[   208.466] (II) intel(0): 004c503133335748322d544c4d3700af
[   208.466] (II) intel(0): EDID vendor "LGD", prod id 788
[   208.466] (II) intel(0): Output HDMI-3 has no monitor section
[   208.466] (II) intel(0): I2C bus "HDMIB" initialized.
[   208.466] (II) intel(0): HDMI-3 output detected
[   208.500] (II) intel(0): EDID for output VGA
[   208.555] (II) intel(0): EDID for output LVDS
[   208.555] (II) intel(0): Manufacturer: LGD  Model: 314  Serial#: 0
[   208.555] (II) intel(0): Year: 2011  Week: 0
[   208.555] (II) intel(0): EDID Version: 1.3
[   208.555] (II) intel(0): Digital Display Input
[   208.555] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 16
[   208.555] (II) intel(0): Gamma: 2.20
[   208.555] (II) intel(0): No DPMS capabilities specified
[   208.555] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb
4:4:4
[   208.555] (II) intel(0): First detailed timing is preferred mode
[   208.555] (II) intel(0): GTF timings supported
[   208.555] (II) intel(0): redX: 0.577 redY: 0.347   greenX: 0.338
greenY: 0.561
[   208.555] (II) intel(0): blueX: 0.159 blueY: 0.127   whiteX: 0.313
whiteY: 0.329
[   208.555] (II) intel(0): Manufacturer's mask: 0
[   208.555] (II) intel(0): Supported detailed timing:
[   208.555] (II) intel(0): clock: 69.7 MHz   Image Size:  293 x 165 mm
[   208.555] (II) intel(0): h_active: 1366  h_sync: 1398  h_sync_end
1430 h_blank_end 1478 h_border: 0
[   208.555] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 776
v_blanking: 786 v_border: 0
[   208.555] (II) intel(0):  LG Display
[   208.555] (II) intel(0):  LP133WH2-TLM7
[   208.555] (II) intel(0): EDID (in hex):
[   208.555] (II) intel(0): 00ffffffffffff0030e4140300000000
[   208.555] (II) intel(0): 00150103801d10780afae59358568f28
[   208.555] (II) intel(0): 20505400000001010101010101010101
[   208.555] (II) intel(0): 0101010101013a1b5670500012302020
[   208.555] (II) intel(0): 350025a5100000190000000000000000
[   208.555] (II) intel(0): 00000000000000000000000000fe004c
[   208.555] (II) intel(0): 4720446973706c61790a2020000000fe
[   208.555] (II) intel(0): 004c503133335748322d544c4d3700af
[   208.555] (II) intel(0): EDID vendor "LGD", prod id 788
[   208.555] (II) intel(0): Printing probed modes for output LVDS
[   208.555] (II) intel(0): Modeline "1366x768"x60.0   69.70  1366 1398
1430 1478  768 771 776 786 -hsync -vsync (47.2 kHz eP)
[   208.555] (II) intel(0): I2C device "HDMIB:ddc2" registered at
address 0xA0.
[   208.559] (II) intel(0): EDID for output HDMI-3
[   208.559] (II) intel(0): EDID for output HDMI-3
[   208.559] (II) intel(0): Output VGA disconnected
[   208.559] (II) intel(0): Output LVDS connected
[   208.559] (II) intel(0): Output HDMI-3 disconnected
[   208.559] (II) intel(0): Using exact sizes for initial modes
[   208.559] (II) intel(0): Output LVDS using initial mode 1366x768
[   208.559] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0)
unless otherwise stated.
[   208.559] (II) intel(0): detected 512 kB GTT.
[   208.559] (II) intel(0): detected 65532 kB stolen memory.
[   208.559] (==) intel(0): video overlay key set to 0x101fe
[   208.559] (==) intel(0): DPI set to (96, 96)
[   208.559] (II) Loading sub module "fb"
[   208.559] (II) LoadModule: "fb"
[   208.560] (II) Loading /usr/X11R6/lib/modules/libfb.so
[   208.571] (II) Module fb: vendor="X.Org Foundation"
[   208.571] compiled for 1.12.2, module version = 1.0.0
[   208.571] ABI class: X.Org ANSI C Emulation, version 0.4
[   208.571] (II) UnloadModule: "vesa"
[   208.571] (II) Unloading vesa
[   208.571] (==) Depth 24 pixmap format is 32 bpp
[   208.585] (II) intel(0): Kernel reported 1006592 total, 0 used
[   208.585] (II) intel(0): I830CheckAvailableMemory: 4026368 kB
available
[   208.588] (WW) intel(0): DRI disabled on Sandy Bridge chipsets
[   208.588] (**) intel(0): Shadow buffer enabled, 2D GPU acceleration
disabled.
[   208.588] (**) intel(0): Framebuffer tiled
[   208.588] (**) intel(0): Pixmaps tiled
[   208.588] (**) intel(0): 3D buffers tiled
[   208.588] (**) intel(0): SwapBuffers wait enabled
[   208.592] (==) intel(0): VideoRam: 262144 KB
[   208.592] (II) intel(0): Allocated new frame buffer 1408x768 stride
5632, tiled
[   208.608] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03b0
[   208.626] (II) UXA(0): Driver registered support for the following
operations:
[   208.626] (II)         solid
[   208.626] (II)         copy
[   208.626] (II)         composite (RENDER acceleration)
[   208.626] (II)         put_image
[   208.626] (II)         get_image
[   208.626] (==) intel(0): Backing store disabled
[   208.626] (==) intel(0): Silken mouse disabled
[   208.630] (II) intel(0): Initializing HW Cursor
[   208.890] Plane disable
[   208.930] Pipe disable
[   208.970] PFIT disable
[   208.970] FDI TX disable
[   208.970] FDI RX disable
[   208.990] FDI TX train 1 preload
[   208.990] FDI RX train 1 preload
[   209.010] Transcoder disable
[   209.050] PCH DPLL disable
[   209.050] FDI RX PLL PCD disable
[   209.050] FDI TX PLL disable 001a2040
[   209.070] FDI RX PLL disable 001c0000
[   209.090] DPMS off done
[   209.110] Plane disable
[   209.110] Pipe disable
[   209.130] PFIT disable
[   209.130] FDI TX disable
[   209.130] FDI RX disable
[   209.150] FDI TX train 1 preload
[   209.150] FDI RX train 1 preload
[   209.170] LVDS port force off
[   209.170] Transcoder disable
[   209.190] PCH DPLL disable
[   209.190] FDI RX PLL PCD disable
[   209.190] FDI TX PLL disable 00000040
[   209.210] FDI RX PLL disable 00040000
[   209.230] DPMS off done
[   209.301] (II) intel(0): Fixed memory allocation layout:
[   209.301] (II) intel(0): 0x03fff000:            end of stolen memory
[   209.301] (II) intel(0): 0x03fff000-0x0fffffff: DRI memory manager
(196612 kB)
[   209.301] (II) intel(0): 0x10000000:            end of aperture
[   209.301] (II) intel(0): BO memory allocation layout:
[   209.301] (II) intel(0): 0x03fff000:            start of memory
manager
[   209.301] (II) intel(0): 0x04552000-0x0455bfff: HW cursors (40 kB)
[   209.301] (II) intel(0): 0x10000000:            end of memory
manager
[   209.302] Plane disable
[   209.302] Pipe disable
[   209.320] PFIT disable
[   209.320] FDI TX disable
[   209.320] FDI RX disable
[   209.340] FDI TX train 1 preload
[   209.340] FDI RX train 1 preload
[   209.360] Transcoder disable
[   209.380] PCH DPLL disable
[   209.380] FDI RX PLL PCD disable
[   209.380] FDI TX PLL disable 001a2040
[   209.400] FDI RX PLL disable 001c0000
[   209.420] DPMS off done
[   209.440] Plane disable
[   209.440] Pipe disable
[   209.460] PFIT disable
[   209.460] FDI TX disable
[   209.460] FDI RX disable
[   209.480] FDI TX train 1 preload
[   209.480] FDI RX train 1 preload
[   209.500] LVDS port force off
[   209.500] Transcoder disable
[   209.520] PCH DPLL disable
[   209.520] FDI RX PLL PCD disable
[   209.520] FDI TX PLL disable 00000040
[   209.540] FDI RX PLL disable 00040000
[   209.560] DPMS off done
[   209.580] Plane disable
[   209.580] Pipe disable
[   209.600] PFIT disable
[   209.600] FDI TX disable
[   209.600] FDI RX disable
[   209.620] FDI TX train 1 preload
[   209.620] FDI RX train 1 preload
[   209.640] LVDS port force off
[   209.640] Transcoder disable
[   209.660] PCH DPLL disable
[   209.660] FDI RX PLL PCD disable
[   209.660] FDI TX PLL disable 00000040
[   209.680] FDI RX PLL disable 00040000
[   209.700] DPMS off done
[   209.720] is lvds
[   209.720] (II) intel(0): using SSC reference clock of 120 MHz
[   209.720] bpp 6
[   209.720] (II) intel(0): Selecting standard 18 bit TMDS pixel
format.
[   209.880] PCH FDI RX PLL enable
[   209.920] PCH FDI TX PLL enable 001a2050
[   209.960] Pipe enable
[   209.980] Plane enable
[   210.040] FDI_RX_IIR 0x100
[   210.040] FDI train 1 done.
[   210.060] FDI_RX_IIR 0x600
[   210.060] FDI train 2 done.
[   210.060] FDI train done
[   210.080] FDI TX link normal
[   210.100] transcoder enable
[   210.100] LUT load
[   210.100] DPMS on done
[   210.100] Plane disable
[   210.100] Pipe disable
[   210.120] PFIT disable
[   210.120] FDI TX disable
[   210.120] FDI RX disable
[   210.140] FDI TX train 1 preload
[   210.140] FDI RX train 1 preload
[   210.160] Transcoder disable
[   210.180] PCH DPLL disable
[   210.180] FDI RX PLL PCD disable
[   210.180] FDI TX PLL disable 001a2040
[   210.200] FDI RX PLL disable 001c0000
[   210.220] DPMS off done
[   210.240] (II) intel(0): Output configuration:
[   210.240] (II) intel(0):   Pipe A is off
[   210.240] (II) intel(0):   Display plane A is now disabled and
connected to pipe A.
[   210.240] (II) intel(0):   Pipe B is on
[   210.240] (II) intel(0):   Display plane B is now enabled and
connected to pipe B.
[   210.240] (II) intel(0):   Output VGA is connected to pipe none
[   210.240] (II) intel(0):   Output LVDS is connected to pipe B
[   210.240] (II) intel(0):   Output HDMI-3 is connected to pipe none
[   210.240] (II) intel(0): RandR 1.2 enabled, ignore the following
RandR disabled message.
[   210.286] (==) intel(0): DPMS enabled
[   210.286] (==) intel(0): Intel XvMC decoder enabled
[   210.287] (WW) intel(0): Disabling Xv because no adaptors could be
initialized.
[   210.287] (II) intel(0): direct rendering: Failed
[   210.287] (--) RandR disabled
[   210.287] (II) Initializing built-in extension Generic Event
Extension
[   210.287] (II) Initializing built-in extension SHAPE
[   210.287] (II) Initializing built-in extension MIT-SHM
[   210.287] (II) Initializing built-in extension XInputExtension
[   210.287] (II) Initializing built-in extension XTEST
[   210.287] (II) Initializing built-in extension BIG-REQUESTS
[   210.287] (II) Initializing built-in extension SYNC
[   210.287] (II) Initializing built-in extension XKEYBOARD
[   210.287] (II) Initializing built-in extension XC-MISC
[   210.287] (II) Initializing built-in extension SECURITY
[   210.287] (II) Initializing built-in extension XINERAMA
[   210.287] (II) Initializing built-in extension XFIXES
[   210.287] (II) Initializing built-in extension RENDER
[   210.287] (II) Initializing built-in extension RANDR
[   210.287] (II) Initializing built-in extension COMPOSITE
[   210.287] (II) Initializing built-in extension DAMAGE
[   210.312] (II) AIGLX: Screen 0 is not DRI2 capable
[   210.312] (II) AIGLX: Screen 0 is not DRI capable
[   210.430] (II) AIGLX: Loaded and initialized swrast
[   210.430] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   210.444] (II) intel(0): Setting screen physical size to 361 x 203
[   210.983] (II) config/wscons: checking input device /dev/wskbd
[   210.983] (II) wskbd: using layout us
[   210.983] (II) LoadModule: "kbd"
[   210.984] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[   210.993] (II) Module kbd: vendor="X.Org Foundation"
[   210.993] compiled for 1.12.2, module version = 1.6.1
[   210.993] Module class: X.Org XInput Driver
[   210.993] ABI class: X.Org XInput driver, version 16.0
[   210.993] (II) Using input driver 'kbd' for '/dev/wskbd'
[   210.993] (**) /dev/wskbd: always reports core events
[   210.993] (**) /dev/wskbd: always reports core events
[   210.993] (**) Option "Protocol" "standard"
[   210.993] (**) Option "XkbRules" "base"
[   210.993] (**) Option "XkbModel" "pc105"
[   210.993] (**) Option "XkbLayout" "us"
[   210.993] (II) XINPUT: Adding extended input device "/dev/wskbd"
(type: KEYBOARD, id 6)
[   211.841] (II) config/wscons: checking input device /dev/wsmouse0
[   211.841] (II) LoadModule: "synaptics"
[   211.842] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[   211.842] (II) Module synaptics: vendor="X.Org Foundation"
[   211.842] compiled for 1.12.2, module version = 1.6.2
[   211.842] Module class: X.Org XInput Driver
[   211.842] ABI class: X.Org XInput driver, version 16.0
[   211.842] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[   211.843] (**) /dev/wsmouse0: always reports core events
[   211.843] (**) Option "Device" "/dev/wsmouse0"
[   213.208] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5706
resolution 52
[   213.208] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4874
resolution 95
[   213.208] (**) /dev/wsmouse0: always reports core events
[   213.214] (II) XINPUT: Adding extended input device "/dev/wsmouse0"
(type: TOUCHPAD, id 7)
[   213.214] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now
constant deceleration 2.5
[   213.214] (**) synaptics: /dev/wsmouse0: MaxSpeed is now 1.75
[   213.214] (**) synaptics: /dev/wsmouse0: AccelFactor is now 0.037
[   213.214] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[   213.214] (**) /dev/wsmouse0: (accel) acceleration profile 1
[   213.214] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[   213.214] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[   213.893] (II) config/wscons: checking input device /dev/wsmouse
[   213.893] (II) LoadModule: "ws"
[   213.894] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[   213.894] (II) Module ws: vendor="X.Org Foundation"
[   213.894] compiled for 1.12.2, module version = 1.3.0
[   213.894] Module class: X.Org XInput Driver
[   213.894] ABI class: X.Org XInput driver, version 16.0
[   213.894] (II) Using input driver 'ws' for '/dev/wsmouse'
[   213.894] (**) /dev/wsmouse: always reports core events
[   213.894] (II) ws: /dev/wsmouse: debuglevel 0
[   213.894] (**) Option "Device" "/dev/wsmouse"
[   213.895] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[   213.895] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[   213.895] (**) ws: /dev/wsmouse: associated screen: 0
[   213.895] (II) ws: /dev/wsmouse: minimum x position: 0
[   213.895] (II) ws: /dev/wsmouse: maximum x position: 1365
[   213.895] (II) ws: /dev/wsmouse: minimum y position: 0
[   213.895] (II) ws: /dev/wsmouse: maximum y position: 767
[   213.895] (==) ws: /dev/wsmouse: Buttons: 7
[   213.895] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[   213.895] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 8)
[   213.895] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[   213.895] (**) /dev/wsmouse: (accel) acceleration profile 0
[   213.895] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[   213.895] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[   213.895] PCH FDI RX PLL enable
[   213.930] PCH FDI TX PLL enable 801a2350
[   213.970] Pipe enable
[   213.970] Plane enable
[   214.010] FDI_RX_IIR 0x100
[   214.010] FDI train 1 done.
[   214.030] FDI_RX_IIR 0x200
[   214.030] FDI train 2 done.
[   214.030] FDI train done
[   214.050] FDI TX link normal
[   214.070] transcoder enable
[   214.070] LUT load
[   214.070] DPMS on done
[   214.169] (II) UnloadModule: "kbd"
[   214.169] (II) UnloadModule: "synaptics"
[   214.172] (II) UnloadModule: "ws"
[   214.185] PCH FDI RX PLL enable
[   214.220] PCH FDI TX PLL enable 801a2350
[   214.260] Pipe enable
[   214.260] Plane enable
[   214.300] FDI_RX_IIR 0x100
[   214.300] FDI train 1 done.
[   214.320] FDI_RX_IIR 0x200
[   214.320] FDI train 2 done.
[   214.320] FDI train done
[   214.340] FDI TX link normal
[   214.360] transcoder enable
[   214.360] LUT load
[   214.360] DPMS on done
[   214.391] Server terminated successfully (0). Closing log file.
=====


>
>> dmesg follows:
>
>The dmesg you quoted is from 5.2. Please show the -current dmesg from
>the USB stick install which actually has the problem.

 I was not clear enough. I only ran the USB boot to see if the problem
with losing video on the Vcons was fixed.

The problem is with the 5.2 release not running E. It works well with
several WMs but when X is running you have to work blind on the Vcons.

I just wanted to see if X in a recent snapshot still hid the other
consoles and it doesn't so my new Tpad is on its way. Meanwhile I just
want to play with E as it comes with 5.2 release so that I can learn
how to config and use E. Then I'll be ready to do testing of your .17
versions when the new Tpad is here.

>
>I have another unrelated question about the machine:
>
>> "Realtek RTS5209 Card Reader" rev 0x01 at pci3 dev 0 function 0 not
>> configured
>> sdhc0 at pci3 dev 0 function 1 "Realtek RTS5209 Card Reader" rev 0x01:
>> apic 2 int 19
>> sdmmc0 at sdhc0
>
>Does the card reader work in 5.2? Does it work in -current?

No. Same dmesg lines.
>



*** NOTE *** Please DO NOT CC me. I <am> subscribed to the list.
Mail to the sender address that does not originate at the list server is tarpitted. The reply-to: address is provided for those who feel compelled to reply off list. Thankyou.

Rod/
---
This life is not the real thing.
It is not even in Beta.
If it was, then OpenBSD would already have a man page for it.

Reply | Threaded
Open this post in threaded view
|

Re: I need a little more Enlightenment

Stefan Sperling-8
On Wed, Jan 16, 2013 at 10:50:36AM +1100, Rod Whitworth wrote:

> On Tue, 15 Jan 2013 11:33:54 +0100, Stefan Sperling wrote:
> >The dmesg you quoted is from 5.2. Please show the -current dmesg from
> >the USB stick install which actually has the problem.
>
>  I was not clear enough. I only ran the USB boot to see if the problem
> with losing video on the Vcons was fixed.
>
> The problem is with the 5.2 release not running E. It works well with
> several WMs but when X is running you have to work blind on the Vcons.
>
> I just wanted to see if X in a recent snapshot still hid the other
> consoles and it doesn't so my new Tpad is on its way. Meanwhile I just
> want to play with E as it comes with 5.2 release so that I can learn
> how to config and use E. Then I'll be ready to do testing of your .17
> versions when the new Tpad is here.

The e17 port in 5.2 is an alpha release. So I suspect you are seeing
a bug in that alpha release when you try to run e17 on 5.2.
To try the e17 0.17.0 release, you have to run -current.

> >I have another unrelated question about the machine:
> >
> >> "Realtek RTS5209 Card Reader" rev 0x01 at pci3 dev 0 function 0 not
> >> configured
> >> sdhc0 at pci3 dev 0 function 1 "Realtek RTS5209 Card Reader" rev 0x01:
> >> apic 2 int 19
> >> sdmmc0 at sdhc0
> >
> >Does the card reader work in 5.2? Does it work in -current?
>
> No. Same dmesg lines.

Same dmesg lines in -current as in 5.2? I very much doubt that.
Are you sure you were trying a -current kernel?
I would expect -current to show something like:

  rtsx0 at pci3 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01: apic 0 int 18
  sdmmc0 at rtsx0
  "Realtek RTS5209 Card Reader" rev 0x01 at pci3 dev 0 function 1 not configured

See http://marc.info/?l=openbsd-tech&m=135732675613607&w=2
(the diff has been committed)

Reply | Threaded
Open this post in threaded view
|

Re: I need a little more Enlightenment

Rod Whitworth-3
On Thu, 17 Jan 2013 14:13:09 +0100, Stefan Sperling wrote:

>On Wed, Jan 16, 2013 at 10:50:36AM +1100, Rod Whitworth wrote:
>> On Tue, 15 Jan 2013 11:33:54 +0100, Stefan Sperling wrote:
>> >The dmesg you quoted is from 5.2. Please show the -current dmesg from
>> >the USB stick install which actually has the problem.
>>
>>  I was not clear enough. I only ran the USB boot to see if the problem
>> with losing video on the Vcons was fixed.
>>
>> The problem is with the 5.2 release not running E. It works well with
>> several WMs but when X is running you have to work blind on the Vcons.
>>
>> I just wanted to see if X in a recent snapshot still hid the other
>> consoles and it doesn't so my new Tpad is on its way. Meanwhile I just
>> want to play with E as it comes with 5.2 release so that I can learn
>> how to config and use E. Then I'll be ready to do testing of your .17
>> versions when the new Tpad is here.
>
>The e17 port in 5.2 is an alpha release. So I suspect you are seeing
>a bug in that alpha release when you try to run e17 on 5.2.
>To try the e17 0.17.0 release, you have to run -current.

Several hours before you wrote this reply I grabbed the current AMD64
install CD and loaded on the USB stick that I had been using to check
that the blank vcons bug was fixed.

There was a glitch in the install with xshare failing during extraction
but I got around that by doing an "upgrade" using a nearby mirror and
only selecting that set.

The reason I grabbed the amd64 version is that the packages associated
with it are compiled shortly after the date of the install CD.

I then pkg_add-ed E17 and it runs but I am no way clued up enough to
comment on its behaviour and that will have to wait for my new Tpad.

Do you have any idea just how slowly usb booted  machines are? I
started pkg_add for E17 before I started preparing dinner and it
finished well after we had finished eating and cleaned up. It's OK for
a quick check as I needed to see if current was free of the invisible
vcon bug but not much else.

>
>> >I have another unrelated question about the machine:
>> >
>> >> "Realtek RTS5209 Card Reader" rev 0x01 at pci3 dev 0 function 0 not
>> >> configured
>> >> sdhc0 at pci3 dev 0 function 1 "Realtek RTS5209 Card Reader" rev 0x01:
>> >> apic 2 int 19
>> >> sdmmc0 at sdhc0
>> >
>> >Does the card reader work in 5.2? Does it work in -current?
>>
>> No. Same dmesg lines.
>
>Same dmesg lines in -current as in 5.2? I very much doubt that.
>Are you sure you were trying a -current kernel?
>I would expect -current to show something like:
>
>  rtsx0 at pci3 dev 0 function 0 "Realtek RTS5209 Card Reader" rev 0x01: apic 0 int 18
>  sdmmc0 at rtsx0
>  "Realtek RTS5209 Card Reader" rev 0x01 at pci3 dev 0 function 1 not configured

I was running current but I just scanned for  "Card Reader" and saw the
"not configured" message and that usually means it ain't going to work.
So I can't swear as to the full message as I overwrote that i386
install with the amd64 one. Sorry. But it isn't working if it is not
configured, is it?

>
>See http://marc.info/?l=openbsd-tech&m=135732675613607&w=2
>(the diff has been committed)
>

I'm not doing any more research on this topic until I have a machine
that I can dedicate to the work and it will be running on a SATA drive.

Thanks for your work and I hope that I can do some real testing for you
in the future.

*** NOTE *** Please DO NOT CC me. I <am> subscribed to the list.
Mail to the sender address that does not originate at the list server is tarpitted. The reply-to: address is provided for those who feel compelled to reply off list. Thankyou.

Rod/
---
This life is not the real thing.
It is not even in Beta.
If it was, then OpenBSD would already have a man page for it.