HP laptops again

classic Classic list List threaded Threaded
25 messages Options
12
Reply | Threaded
Open this post in threaded view
|

HP laptops again

Marco Peereboom
I have got a few pledges for hp laptops.  I have gotten good (as in bad)
test reports of the following models that fail one way or another:
* HP eb8730w
* HP nw9440
* HP Mini 5102
* HP 530

I think we have 2 major acpi issues with these.  One of them looks like
an aml bug where we don't dereference an object deep enough and some
thermal zone issues.  Unfortunately it seems that these are 2 distinct
issues and therefore potentially require 2 laptops to figure them out.
The laptops in question are relatively cheap on ebay so I think we can
make do with about $800USD worth for 2 machines.

One of these machines fails to boot; different class of bug but very
interesting nonetheless to fix.

I am 25% there with pledges.  So if you are interested in getting these
2 bugs fixed send me an email with the pledge amount. I won't accept
cash until we have enough to actually order machines.

Oh and so that you know once these bugs are fixed we'll try to make
these laptops suspend and resume (an entire different beast!).  And
after that the laptops will go to a developer who needs a laptop to work
on.

Please contact me at [hidden email] and not on the list.

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Marco Peereboom
Little status update.  We got one laptop ordered (thanks everyone!) and
are a few hundred short of the next.  So if you care about these bugs
please pony up ;-)

/marco

On Mon, Jul 26, 2010 at 12:52:35PM -0500, Marco Peereboom wrote:

> I have got a few pledges for hp laptops.  I have gotten good (as in bad)
> test reports of the following models that fail one way or another:
> * HP eb8730w
> * HP nw9440
> * HP Mini 5102
> * HP 530
>
> I think we have 2 major acpi issues with these.  One of them looks like
> an aml bug where we don't dereference an object deep enough and some
> thermal zone issues.  Unfortunately it seems that these are 2 distinct
> issues and therefore potentially require 2 laptops to figure them out.
> The laptops in question are relatively cheap on ebay so I think we can
> make do with about $800USD worth for 2 machines.
>
> One of these machines fails to boot; different class of bug but very
> interesting nonetheless to fix.
>
> I am 25% there with pledges.  So if you are interested in getting these
> 2 bugs fixed send me an email with the pledge amount. I won't accept
> cash until we have enough to actually order machines.
>
> Oh and so that you know once these bugs are fixed we'll try to make
> these laptops suspend and resume (an entire different beast!).  And
> after that the laptops will go to a developer who needs a laptop to work
> on.
>
> Please contact me at [hidden email] and not on the list.

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Jan Stary
> On Mon, Jul 26, 2010 at 12:52:35PM -0500, Marco Peereboom wrote:
> > I have got a few pledges for hp laptops.  I have gotten good (as in bad)
> > test reports of the following models that fail one way or another:
> > * HP eb8730w
> > * HP nw9440
> > * HP Mini 5102
> > * HP 530

While I cannot donate my HP eb8530w (NB: 8530, not 8730),
I would at least like to provide a good (=bad) test report.

> > I think we have 2 major acpi issues with these.  One of them looks like
> > an aml bug where we don't dereference an object deep enough and some
> > thermal zone issues.

I have had issues with acpitz shuting down on boot because
of critical temperature, as described also by others on
this list some time ago.

What else do I need to provide besides dmesg, sysctl hw,
and an acpidump (which I did)?

        Thank you for your time

                Jan

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Marco Peereboom
On Wed, Jul 28, 2010 at 05:45:14PM +0200, Jan Stary wrote:

> > On Mon, Jul 26, 2010 at 12:52:35PM -0500, Marco Peereboom wrote:
> > > I have got a few pledges for hp laptops.  I have gotten good (as in bad)
> > > test reports of the following models that fail one way or another:
> > > * HP eb8730w
> > > * HP nw9440
> > > * HP Mini 5102
> > > * HP 530
>
> While I cannot donate my HP eb8530w (NB: 8530, not 8730),
> I would at least like to provide a good (=bad) test report.

Actually a test with up to the second -current would be helpful to get a
baseline where we are at with this machine.

Then mail me acpidump -o hp8350 results + dmesg + pcidump -v

>
> > > I think we have 2 major acpi issues with these.  One of them looks like
> > > an aml bug where we don't dereference an object deep enough and some
> > > thermal zone issues.
>
> I have had issues with acpitz shuting down on boot because
> of critical temperature, as described also by others on
> this list some time ago.
>
> What else do I need to provide besides dmesg, sysctl hw,
> and an acpidump (which I did)?
>
> Thank you for your time
>
> Jan

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

matteo filippetto
> Then mail me acpidump -o hp8350 results + dmesg + pcidump -v
>

Hi,

I have an hp ProBook 4520s that has problem with acpi (boot only with
acpi disable).

Do you need my results for those commands?

Best regards.

--
Matteo Filippetto

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Matthew Dempsky-3
On Wed, Jul 28, 2010 at 9:21 AM, matteo filippetto
<[hidden email]> wrote:
>> Then mail me acpidump -o hp8350 results + dmesg + pcidump -v
>>
>
> Hi,
>
> I have an hp ProBook 4520s that has problem with acpi (boot only with
> acpi disable).
>
> Do you need my results for those commands?

Only if you want it fixed. :)

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Jan Stary
In reply to this post by Marco Peereboom
On Jul 28 11:07:08, Marco Peereboom wrote:

> On Wed, Jul 28, 2010 at 05:45:14PM +0200, Jan Stary wrote:
> > > On Mon, Jul 26, 2010 at 12:52:35PM -0500, Marco Peereboom wrote:
> > > > I have got a few pledges for hp laptops.  I have gotten good (as in bad)
> > > > test reports of the following models that fail one way or another:
> > > > * HP eb8730w
> > > > * HP nw9440
> > > > * HP Mini 5102
> > > > * HP 530
> >
> > While I cannot donate my HP eb8530w (NB: 8530, not 8730),
> > I would at least like to provide a good (=bad) test report.
>
> Actually a test with up to the second -current would be helpful to get a
> baseline where we are at with this machine.

What is the "second -current"?

I have just seen the very current bsd.rd (from ftp.openbsd.org)
segfault on me during the fdisk stage of an install. (This has
happened sooner today on another machine, too.)

So I have used the 4.7/i386/bsd.rd to install -current,
ignoring the checksum missmatches.

> Then mail me acpidump -o hp8350 results + dmesg + pcidump -v

The acpidump is at http://stare.cz/~hans/.tmp/hp8530w.tar
and the dmesg and pcidump -v is below.


(1)
Right after the first (re)boot, the system gets
shut down because of "critical temperature":

        acpitz2: Critical temperature 4989C (52624K), shutting down

A workaround that works for me is to simply
'disable acpitz' in UKC.

(2)
'apmd -C' works OK: the CPU scales appropriately based on load;
the battery status is reported correctly; the monitor dims/brightens
when AC is plugged out/in.

(3)
'apm -S' puts the machine to standby; everything goes black,
just the power button's led starts blinking. After
pressing the power button everything comes back up,
including the network connections (of em0; don't know
about iwn0, I am not in a reach of a wifi network
right now; will test tomorrow).

One exception is the monitor: it is still dark;
I can log in remotely though, bring my
tmux sessions back up etc. The tmux sessions come back
up with the windows reduced (as happens in a larger
xterm when the same session is still open with smaller
80x25 windows elsewhere).

I was at the console when I issued 'apm -S', X was not running.
If it makes any difference, I issued the 'apm -S' from within
root's tmux session.

According to my cheap wattmeter, the power consumption
drops from about 30W to 0 during the standby mode, and
comes back up to 23W (the difference being the monitor
not comming back up?).
 
(4)
'apm -z' suspends the machine. On the outside the behaviour
is just like (3), incluing the monitor not comming back up.
(not that I really understand the exact differences of what
apm -S / apm -z is supposed to do).


(5)
Both (3) and (4) behave the same on AC and on battery.


(6)
apm -S worked with both closed and open lid.


(7)
apm -z worked with the lid open; with the lid closed,
it worked more then once and failed more then once.

Actually, it *sometimes* happens that the machine
does not boot - the LEDs turn on, but the monitor
does not, and nothing else happens. I have seen this
even before trying suspend, just on normal boots in the
last months. Now this seems to be the same state into which
the machine gets after an unsuccesfull suspend/resume
- it almost reboots, but not really. I have not
been able to detect any pattern of when this happens.


(8)
*Sometimes* the machine boots fully, but then
I cannot type my login; when this happens, then also
the sound and wifi hardware "icons" do not work.
As if the whole keyboard was not there. I haven't
detected any pattern in this either.


Please let me knoe of what more I should test.

        Thank you very much for you efforts!

                Jan



dmesg of a boot that ends with a shutdown
due to "critical temperature":

Jul 28 21:07:34 hp syslogd: start
Jul 28 21:07:34 hp /bsd: OpenBSD 4.8-beta (GENERIC.MP) #282: Tue Jul 27 14:43:59 MDT 2010
Jul 28 21:07:34 hp /bsd:     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
Jul 28 21:07:34 hp /bsd: RTC BIOS diagnostic error bb<clock_battery,config_unit,memory_size,fixed_disk>
Jul 28 21:07:34 hp /bsd: cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz
Jul 28 21:07:34 hp /bsd: cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
Jul 28 21:07:34 hp /bsd: real mem  = 2125561856 (2027MB)
Jul 28 21:07:34 hp /bsd: avail mem = 2080784384 (1984MB)
Jul 28 21:07:34 hp /bsd: mainbus0 at root
Jul 28 21:07:34 hp /bsd: bios0 at mainbus0: AT/286+ BIOS, date 11/10/08, SMBIOS rev. 2.4 @ 0x7edc4000 (21 entries)
Jul 28 21:07:34 hp /bsd: bios0: vendor Hewlett-Packard version "68PDV Ver. F.06" date 12/15/2008
Jul 28 21:07:34 hp /bsd: bios0: Hewlett-Packard HP EliteBook 8530w
Jul 28 21:07:34 hp /bsd: acpi0 at bios0: rev 2
Jul 28 21:07:34 hp /bsd: acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SLIC SSDT DMAR ASF! SSDT SSDT SSDT
Jul 28 21:07:34 hp /bsd: acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5) RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5)
Jul 28 21:07:34 hp /bsd: acpitimer0 at acpi0: 3579545 Hz, 24 bits
Jul 28 21:07:34 hp /bsd: acpihpet0 at acpi0: 14318179 Hz
Jul 28 21:07:34 hp /bsd: acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
Jul 28 21:07:34 hp /bsd: cpu0 at mainbus0: apid 0 (boot processor)
Jul 28 21:07:34 hp /bsd: cpu0: apic clock running at 265MHz
Jul 28 21:07:34 hp /bsd: cpu1 at mainbus0: apid 1 (application processor)
Jul 28 21:07:34 hp /bsd: cpu1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz
Jul 28 21:07:34 hp /bsd: cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
Jul 28 21:07:34 hp /bsd: ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
Jul 28 21:07:34 hp /bsd: ioapic0: misconfigured as apic 0, remapped to apid 1
Jul 28 21:07:34 hp /bsd: acpiprt0 at acpi0: bus 1 (PEGP)
Jul 28 21:07:34 hp /bsd: acpiprt1 at acpi0: bus 2 (RP01)
Jul 28 21:07:34 hp /bsd: acpiprt2 at acpi0: bus 3 (RP02)
Jul 28 21:07:34 hp /bsd: acpiprt3 at acpi0: bus 4 (RP03)
Jul 28 21:07:34 hp /bsd: acpiprt4 at acpi0: bus 69 (RP05)
Jul 28 21:07:34 hp /bsd: acpiprt5 at acpi0: bus 134 (PCIB)
Jul 28 21:07:34 hp /bsd: acpiprt6 at acpi0: bus 0 (PCI0)
Jul 28 21:07:34 hp /bsd: acpiec0 at acpi0
Jul 28 21:07:34 hp /bsd: acpicpu0 at acpi0: C3, C2, C1, PSS
Jul 28 21:07:34 hp /bsd: acpicpu1 at acpi0: C3, C2, C1, PSS
Jul 28 21:07:34 hp /bsd: acpipwrres0 at acpi0: APPR
Jul 28 21:07:34 hp /bsd: acpipwrres1 at acpi0: COMP
Jul 28 21:07:34 hp /bsd: acpipwrres2 at acpi0: LPP_
Jul 28 21:07:34 hp /bsd: acpipwrres3 at acpi0: PGF0
Jul 28 21:07:34 hp /bsd: acpitz0 at acpi0: critical temperature 115 degC
Jul 28 21:07:34 hp /bsd: acpitz1 at acpi0: critical temperature 105 degC
Jul 28 21:07:34 hp /bsd: acpitz2 at acpi0: critical temperature 112 degC
Jul 28 21:07:34 hp /bsd: acpitz3 at acpi0: critical temperature 112 degC
Jul 28 21:07:34 hp /bsd: acpitz4 at acpi0: critical temperature 90 degC
Jul 28 21:07:34 hp /bsd: acpitz5 at acpi0: critical temperature 112 degC
Jul 28 21:07:34 hp /bsd: acpibat0 at acpi0: BAT0 not present
Jul 28 21:07:34 hp /bsd: acpibat1 at acpi0: BAT1 not present
Jul 28 21:07:34 hp /bsd: acpiac0 at acpi0: AC unit offline
Jul 28 21:07:34 hp /bsd: acpibtn0 at acpi0: SLPB
Jul 28 21:07:34 hp /bsd: acpibtn1 at acpi0: LID_
Jul 28 21:07:34 hp /bsd: acpivideo0 at acpi0: DGFX
Jul 28 21:07:34 hp /bsd: acpivout0 at acpivideo0: LCD_
Jul 28 21:07:34 hp /bsd: acpivout1 at acpivideo0: CRT_
Jul 28 21:07:34 hp /bsd: acpivout2 at acpivideo0: DVI_
Jul 28 21:07:34 hp /bsd: acpivout3 at acpivideo0: DD04
Jul 28 21:07:34 hp /bsd: bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000 0xcf800/0x1000
Jul 28 21:07:34 hp /bsd: cpu0: Enhanced SpeedStep 2528 MHz: speeds: 2534, 2533, 1600, 800 MHz
Jul 28 21:07:34 hp /bsd: pci0 at mainbus0 bus 0: configuration mode 1 (bios)
Jul 28 21:07:34 hp /bsd: pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
Jul 28 21:07:34 hp /bsd: ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16 (irq 10)
Jul 28 21:07:34 hp /bsd: pci1 at ppb0 bus 1
Jul 28 21:07:34 hp /bsd: vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x065c rev 0xa1
Jul 28 21:07:34 hp /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
Jul 28 21:07:34 hp /bsd: wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
Jul 28 21:07:34 hp /bsd: "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
Jul 28 21:07:34 hp /bsd: pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
Jul 28 21:07:34 hp /bsd: pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
Jul 28 21:07:34 hp /bsd: pciide0: channel 0 ignored (not responding; disabled or no drives?)
Jul 28 21:07:34 hp /bsd: pciide0: channel 1 ignored (not responding; disabled or no drives?)
Jul 28 21:07:34 hp /bsd: "Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
Jul 28 21:07:34 hp /bsd: em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 int 22 (irq 10), address 00:23:7d:e7:ac:60
Jul 28 21:07:34 hp /bsd: uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 (irq 10)
Jul 28 21:07:34 hp /bsd: uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 (irq 10)
Jul 28 21:07:34 hp /bsd: uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq 11)
Jul 28 21:07:34 hp /bsd: ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq 10)
Jul 28 21:07:34 hp /bsd: usb0 at ehci0: USB revision 2.0
Jul 28 21:07:34 hp /bsd: uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
Jul 28 21:07:34 hp /bsd: azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 int 17 (irq 10)
Jul 28 21:07:34 hp /bsd: azalia0: codecs: Analog Devices AD1984A, AT&T/Lucent/0x1040, using Analog Devices AD1984A
Jul 28 21:07:34 hp /bsd: audio0 at azalia0
Jul 28 21:07:34 hp /bsd: ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq 10)
Jul 28 21:07:34 hp /bsd: pci2 at ppb1 bus 2
Jul 28 21:07:34 hp /bsd: ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17 (irq 10)
Jul 28 21:07:34 hp /bsd: pci3 at ppb2 bus 3
Jul 28 21:07:34 hp /bsd: iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: apic 1 int 17 (irq 10), MIMO 3T3R, MoW, address 00:21:6a:0f:b2:8e
Jul 28 21:07:34 hp /bsd: ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18 (irq 11)
Jul 28 21:07:34 hp /bsd: pci4 at ppb3 bus 4
Jul 28 21:07:34 hp /bsd: ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq 10)
Jul 28 21:07:34 hp /bsd: pci5 at ppb4 bus 69
Jul 28 21:07:34 hp /bsd: uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq 10)
Jul 28 21:07:34 hp /bsd: uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22 (irq 10)
Jul 28 21:07:34 hp /bsd: uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq 11)
Jul 28 21:07:34 hp /bsd: ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq 10)
Jul 28 21:07:34 hp /bsd: usb1 at ehci1: USB revision 2.0
Jul 28 21:07:34 hp /bsd: uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
Jul 28 21:07:34 hp /bsd: ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
Jul 28 21:07:34 hp /bsd: pci6 at ppb5 bus 134
Jul 28 21:07:34 hp /bsd: "Ricoh 5C832 Firewire" rev 0x06 at pci6 dev 9 function 0 not configured
Jul 28 21:07:34 hp /bsd: sdhc0 at pci6 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x25: apic 1 int 22 (irq 10)
Jul 28 21:07:34 hp /bsd: sdmmc0 at sdhc0
Jul 28 21:07:34 hp /bsd: "Ricoh 5C843 MMC" rev 0x14 at pci6 dev 9 function 2 not configured
Jul 28 21:07:34 hp /bsd: "Ricoh 5C592 Memory Stick" rev 0x14 at pci6 dev 9 function 3 not configured
Jul 28 21:07:34 hp /bsd: "Ricoh 5C852 xD" rev 0x14 at pci6 dev 9 function 4 not configured
Jul 28 21:07:34 hp /bsd: cbb0 at pci6 dev 9 function 5 "Ricoh 5C476 CardBus" rev 0xbb: apic 1 int 22 (irq 10)
Jul 28 21:07:34 hp /bsd: cardslot0 at cbb0 slot 0 flags 0
Jul 28 21:07:34 hp /bsd: cardbus0 at cardslot0: bus 135 device 0 cacheline 0x0, lattimer 0x20
Jul 28 21:07:34 hp /bsd: pcmcia0 at cardslot0
Jul 28 21:07:34 hp /bsd: pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
Jul 28 21:07:34 hp /bsd: ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 21 (irq 10), AHCI 1.2
Jul 28 21:07:34 hp /bsd: scsibus0 at ahci0: 32 targets
Jul 28 21:07:34 hp /bsd: sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72322, FCDO> SCSI3 0/direct fixed
Jul 28 21:07:34 hp /bsd: sd0: 238475MB, 512 bytes/sec, 488397168 sec total
Jul 28 21:07:34 hp /bsd: cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T50L, SC04> ATAPI 5/cdrom removable
Jul 28 21:07:34 hp /bsd: usb2 at uhci0: USB revision 1.0
Jul 28 21:07:34 hp /bsd: uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Jul 28 21:07:34 hp /bsd: usb3 at uhci1: USB revision 1.0
Jul 28 21:07:34 hp /bsd: uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Jul 28 21:07:34 hp /bsd: usb4 at uhci2: USB revision 1.0
Jul 28 21:07:34 hp /bsd: uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Jul 28 21:07:34 hp /bsd: usb5 at uhci3: USB revision 1.0
Jul 28 21:07:34 hp /bsd: uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Jul 28 21:07:34 hp /bsd: usb6 at uhci4: USB revision 1.0
Jul 28 21:07:34 hp /bsd: uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Jul 28 21:07:34 hp /bsd: usb7 at uhci5: USB revision 1.0
Jul 28 21:07:34 hp /bsd: uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Jul 28 21:07:34 hp /bsd: isa0 at pcib0
Jul 28 21:07:34 hp /bsd: isadma0 at isa0
Jul 28 21:07:34 hp /bsd: pckbc0 at isa0 port 0x60/5
Jul 28 21:07:34 hp /bsd: pckbd0 at pckbc0 (kbd slot)
Jul 28 21:07:34 hp /bsd: pckbc0: using irq 1 for kbd slot
Jul 28 21:07:34 hp /bsd: wskbd0 at pckbd0: console keyboard, using wsdisplay0
Jul 28 21:07:34 hp /bsd: pms0 at pckbc0 (aux slot)
Jul 28 21:07:34 hp /bsd: pckbc0: using irq 12 for aux slot
Jul 28 21:07:34 hp /bsd: wsmouse0 at pms0 mux 0
Jul 28 21:07:34 hp /bsd: pcppi0 at isa0 port 0x61
Jul 28 21:07:34 hp /bsd: midi0 at pcppi0: <PC speaker>
Jul 28 21:07:34 hp /bsd: spkr0 at pcppi0
Jul 28 21:07:34 hp /bsd: lpt0 at isa0 port 0x378/4 irq 7
Jul 28 21:07:34 hp /bsd: npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
Jul 28 21:07:34 hp /bsd: mtrr: Pentium Pro MTRR support
Jul 28 21:07:34 hp /bsd: "RICOH, Bay8Controller" (manufacturer 0x0, product 0x0) at pcmcia0 function 0 not configured
Jul 28 21:07:34 hp /bsd: uvideo0 at uhub0 port 5 configuration 1 interface 0 "Chicony Electronics Co., Ltd. CKA7216" rev 2.00/32.18 addr 2
Jul 28 21:07:34 hp /bsd: video0 at uvideo0
Jul 28 21:07:34 hp /bsd: ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
Jul 28 21:07:34 hp /bsd: ubt0 at uhub2 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr 2
Jul 28 21:07:34 hp /bsd: softraid0 at root
Jul 28 21:07:34 hp /bsd: root on sd0a swap on sd0b dump on sd0b
Jul 28 21:07:34 hp /bsd: acpitz2: Critical temperature 4989C (52624K), shutting down
Jul 28 21:07:35 hp savecore: no core dump
Jul 28 21:07:41 hp /bsd: acpitz2: Critical temperature 4989C (52624K), shutting down
Jul 28 21:07:43 hp syslogd: restart
Jul 28 21:07:51 hp /bsd: acpitz2: Critical temperature 4989C (52624K), shutting down
Jul 28 21:07:53 hp syslogd: exiting on signal 15



dmesg of a kernel with acpitz disabled:

Jul 28 21:09:53 hp syslogd: start
Jul 28 21:09:53 hp /bsd: OpenBSD 4.8-beta (GENERIC.MP) #282: Tue Jul 27 14:43:59 MDT 2010
Jul 28 21:09:53 hp /bsd:     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
Jul 28 21:09:53 hp /bsd: RTC BIOS diagnostic error bb<clock_battery,config_unit,memory_size,fixed_disk>
Jul 28 21:09:53 hp /bsd: cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz
Jul 28 21:09:53 hp /bsd: cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
Jul 28 21:09:53 hp /bsd: real mem  = 2125561856 (2027MB)
Jul 28 21:09:53 hp /bsd: avail mem = 2080784384 (1984MB)
Jul 28 21:09:53 hp /bsd: User Kernel Config
Jul 28 21:09:53 hp /bsd: UKC> disable acpitz
Jul 28 21:09:53 hp /bsd: 486 acpitz* disabled
Jul 28 21:09:53 hp /bsd: UKC> quit
Jul 28 21:09:53 hp /bsd: Continuing...
Jul 28 21:09:53 hp /bsd: mainbus0 at root
Jul 28 21:09:53 hp /bsd: bios0 at mainbus0: AT/286+ BIOS, date 11/10/08, SMBIOS rev. 2.4 @ 0x7edc4000 (21 entries)
Jul 28 21:09:53 hp /bsd: bios0: vendor Hewlett-Packard version "68PDV Ver. F.06" date 12/15/2008
Jul 28 21:09:53 hp /bsd: bios0: Hewlett-Packard HP EliteBook 8530w
Jul 28 21:09:53 hp /bsd: acpi0 at bios0: rev 2
Jul 28 21:09:53 hp /bsd: acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SLIC SSDT DMAR ASF! SSDT SSDT SSDT
Jul 28 21:09:53 hp /bsd: acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5) RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5)
Jul 28 21:09:53 hp /bsd: acpitimer0 at acpi0: 3579545 Hz, 24 bits
Jul 28 21:09:53 hp /bsd: acpihpet0 at acpi0: 14318179 Hz
Jul 28 21:09:53 hp /bsd: acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
Jul 28 21:09:53 hp /bsd: cpu0 at mainbus0: apid 0 (boot processor)
Jul 28 21:09:53 hp /bsd: cpu0: apic clock running at 265MHz
Jul 28 21:09:53 hp /bsd: cpu1 at mainbus0: apid 1 (application processor)
Jul 28 21:09:53 hp /bsd: cpu1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz
Jul 28 21:09:53 hp /bsd: cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
Jul 28 21:09:53 hp /bsd: ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
Jul 28 21:09:53 hp /bsd: ioapic0: misconfigured as apic 0, remapped to apid 1
Jul 28 21:09:53 hp /bsd: acpiprt0 at acpi0: bus 1 (PEGP)
Jul 28 21:09:53 hp /bsd: acpiprt1 at acpi0: bus 2 (RP01)
Jul 28 21:09:53 hp /bsd: acpiprt2 at acpi0: bus 3 (RP02)
Jul 28 21:09:53 hp /bsd: acpiprt3 at acpi0: bus 4 (RP03)
Jul 28 21:09:53 hp /bsd: acpiprt4 at acpi0: bus 69 (RP05)
Jul 28 21:09:53 hp /bsd: acpiprt5 at acpi0: bus 134 (PCIB)
Jul 28 21:09:53 hp /bsd: acpiprt6 at acpi0: bus 0 (PCI0)
Jul 28 21:09:53 hp /bsd: acpiec0 at acpi0
Jul 28 21:09:53 hp /bsd: acpicpu0 at acpi0: C3, C2, C1, PSS
Jul 28 21:09:53 hp /bsd: acpicpu1 at acpi0: C3, C2, C1, PSS
Jul 28 21:09:53 hp /bsd: acpipwrres0 at acpi0: APPR
Jul 28 21:09:53 hp /bsd: acpipwrres1 at acpi0: COMP
Jul 28 21:09:53 hp /bsd: acpipwrres2 at acpi0: LPP_
Jul 28 21:09:53 hp /bsd: acpipwrres3 at acpi0: PGF0
Jul 28 21:09:53 hp /bsd: acpitz at acpi0 not configured
Jul 28 21:09:53 hp last message repeated 5 times
Jul 28 21:09:53 hp /bsd: acpibat0 at acpi0: BAT0 not present
Jul 28 21:09:53 hp /bsd: acpibat1 at acpi0: BAT1 not present
Jul 28 21:09:53 hp /bsd: acpiac0 at acpi0: AC unit offline
Jul 28 21:09:53 hp /bsd: acpibtn0 at acpi0: SLPB
Jul 28 21:09:53 hp /bsd: acpibtn1 at acpi0: LID_
Jul 28 21:09:53 hp /bsd: acpivideo0 at acpi0: DGFX
Jul 28 21:09:53 hp /bsd: acpivout0 at acpivideo0: LCD_
Jul 28 21:09:53 hp /bsd: acpivout1 at acpivideo0: CRT_
Jul 28 21:09:53 hp /bsd: acpivout2 at acpivideo0: DVI_
Jul 28 21:09:53 hp /bsd: acpivout3 at acpivideo0: DD04
Jul 28 21:09:53 hp /bsd: bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000 0xcf800/0x1000
Jul 28 21:09:53 hp /bsd: cpu0: Enhanced SpeedStep 2528 MHz: speeds: 2534, 2533, 1600, 800 MHz
Jul 28 21:09:53 hp /bsd: pci0 at mainbus0 bus 0: configuration mode 1 (bios)
Jul 28 21:09:53 hp /bsd: pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
Jul 28 21:09:53 hp /bsd: ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16 (irq 10)
Jul 28 21:09:53 hp /bsd: pci1 at ppb0 bus 1
Jul 28 21:09:53 hp /bsd: vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x065c rev 0xa1
Jul 28 21:09:53 hp /bsd: wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
Jul 28 21:09:53 hp /bsd: wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
Jul 28 21:09:53 hp /bsd: "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
Jul 28 21:09:53 hp /bsd: pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
Jul 28 21:09:53 hp /bsd: pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
Jul 28 21:09:53 hp /bsd: pciide0: channel 0 ignored (not responding; disabled or no drives?)
Jul 28 21:09:53 hp /bsd: pciide0: channel 1 ignored (not responding; disabled or no drives?)
Jul 28 21:09:53 hp /bsd: "Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
Jul 28 21:09:53 hp /bsd: em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 int 22 (irq 10), address 00:23:7d:e7:ac:60
Jul 28 21:09:53 hp /bsd: uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 (irq 10)
Jul 28 21:09:53 hp /bsd: uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 (irq 10)
Jul 28 21:09:53 hp /bsd: uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq 11)
Jul 28 21:09:53 hp /bsd: ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq 10)
Jul 28 21:09:53 hp /bsd: usb0 at ehci0: USB revision 2.0
Jul 28 21:09:53 hp /bsd: uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
Jul 28 21:09:53 hp /bsd: azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 int 17 (irq 10)
Jul 28 21:09:53 hp /bsd: azalia0: codecs: Analog Devices AD1984A, AT&T/Lucent/0x1040, using Analog Devices AD1984A
Jul 28 21:09:53 hp /bsd: audio0 at azalia0
Jul 28 21:09:53 hp /bsd: ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq 10)
Jul 28 21:09:53 hp /bsd: pci2 at ppb1 bus 2
Jul 28 21:09:53 hp /bsd: ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17 (irq 10)
Jul 28 21:09:53 hp /bsd: pci3 at ppb2 bus 3
Jul 28 21:09:53 hp /bsd: iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: apic 1 int 17 (irq 10), MIMO 3T3R, MoW, address 00:21:6a:0f:b2:8e
Jul 28 21:09:53 hp /bsd: ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18 (irq 11)
Jul 28 21:09:53 hp /bsd: pci4 at ppb3 bus 4
Jul 28 21:09:53 hp /bsd: ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq 10)
Jul 28 21:09:53 hp /bsd: pci5 at ppb4 bus 69
Jul 28 21:09:53 hp /bsd: uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq 10)
Jul 28 21:09:53 hp /bsd: uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22 (irq 10)
Jul 28 21:09:53 hp /bsd: uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq 11)
Jul 28 21:09:53 hp /bsd: ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq 10)
Jul 28 21:09:53 hp /bsd: usb1 at ehci1: USB revision 2.0
Jul 28 21:09:53 hp /bsd: uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
Jul 28 21:09:53 hp /bsd: ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
Jul 28 21:09:53 hp /bsd: pci6 at ppb5 bus 134
Jul 28 21:09:53 hp /bsd: "Ricoh 5C832 Firewire" rev 0x06 at pci6 dev 9 function 0 not configured
Jul 28 21:09:53 hp /bsd: sdhc0 at pci6 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x25: apic 1 int 22 (irq 10)
Jul 28 21:09:53 hp /bsd: sdmmc0 at sdhc0
Jul 28 21:09:53 hp /bsd: "Ricoh 5C843 MMC" rev 0x14 at pci6 dev 9 function 2 not configured
Jul 28 21:09:53 hp /bsd: "Ricoh 5C592 Memory Stick" rev 0x14 at pci6 dev 9 function 3 not configured
Jul 28 21:09:53 hp /bsd: "Ricoh 5C852 xD" rev 0x14 at pci6 dev 9 function 4 not configured
Jul 28 21:09:53 hp /bsd: cbb0 at pci6 dev 9 function 5 "Ricoh 5C476 CardBus" rev 0xbb: apic 1 int 22 (irq 10)
Jul 28 21:09:53 hp /bsd: cardslot0 at cbb0 slot 0 flags 0
Jul 28 21:09:53 hp /bsd: cardbus0 at cardslot0: bus 135 device 0 cacheline 0x0, lattimer 0x20
Jul 28 21:09:53 hp /bsd: pcmcia0 at cardslot0
Jul 28 21:09:53 hp /bsd: pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
Jul 28 21:09:53 hp /bsd: ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 21 (irq 10), AHCI 1.2
Jul 28 21:09:53 hp /bsd: scsibus0 at ahci0: 32 targets
Jul 28 21:09:53 hp /bsd: sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72322, FCDO> SCSI3 0/direct fixed
Jul 28 21:09:53 hp /bsd: sd0: 238475MB, 512 bytes/sec, 488397168 sec total
Jul 28 21:09:53 hp /bsd: cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T50L, SC04> ATAPI 5/cdrom removable
Jul 28 21:09:53 hp /bsd: usb2 at uhci0: USB revision 1.0
Jul 28 21:09:53 hp /bsd: uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Jul 28 21:09:53 hp /bsd: usb3 at uhci1: USB revision 1.0
Jul 28 21:09:53 hp /bsd: uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Jul 28 21:09:53 hp /bsd: usb4 at uhci2: USB revision 1.0
Jul 28 21:09:53 hp /bsd: uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Jul 28 21:09:53 hp /bsd: usb5 at uhci3: USB revision 1.0
Jul 28 21:09:53 hp /bsd: uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Jul 28 21:09:53 hp /bsd: usb6 at uhci4: USB revision 1.0
Jul 28 21:09:53 hp /bsd: uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Jul 28 21:09:53 hp /bsd: usb7 at uhci5: USB revision 1.0
Jul 28 21:09:53 hp /bsd: uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
Jul 28 21:09:53 hp /bsd: isa0 at pcib0
Jul 28 21:09:53 hp /bsd: isadma0 at isa0
Jul 28 21:09:53 hp /bsd: pckbc0 at isa0 port 0x60/5
Jul 28 21:09:53 hp /bsd: pckbd0 at pckbc0 (kbd slot)
Jul 28 21:09:53 hp /bsd: pckbc0: using irq 1 for kbd slot
Jul 28 21:09:53 hp /bsd: wskbd0 at pckbd0: console keyboard, using wsdisplay0
Jul 28 21:09:53 hp /bsd: pms0 at pckbc0 (aux slot)
Jul 28 21:09:53 hp /bsd: pckbc0: using irq 12 for aux slot
Jul 28 21:09:53 hp /bsd: wsmouse0 at pms0 mux 0
Jul 28 21:09:53 hp /bsd: pcppi0 at isa0 port 0x61
Jul 28 21:09:54 hp /bsd: midi0 at pcppi0: <PC speaker>
Jul 28 21:09:54 hp /bsd: spkr0 at pcppi0
Jul 28 21:09:54 hp /bsd: lpt0 at isa0 port 0x378/4 irq 7
Jul 28 21:09:54 hp /bsd: npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
Jul 28 21:09:54 hp /bsd: mtrr: Pentium Pro MTRR support
Jul 28 21:09:54 hp /bsd: "RICOH, Bay8Controller" (manufacturer 0x0, product 0x0) at pcmcia0 function 0 not configured
Jul 28 21:09:54 hp /bsd: uvideo0 at uhub0 port 5 configuration 1 interface 0 "Chicony Electronics Co., Ltd. CKA7216" rev 2.00/32.18 addr 2
Jul 28 21:09:54 hp /bsd: video0 at uvideo0
Jul 28 21:09:54 hp /bsd: ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
Jul 28 21:09:54 hp /bsd: ubt0 at uhub2 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr 2
Jul 28 21:09:54 hp /bsd: softraid0 at root
Jul 28 21:09:54 hp /bsd: root on sd0a swap on sd0b dump on sd0b
Jul 28 21:09:53 hp savecore: no core dump



pcidump -v

Domain /dev/pci0:
 0:0:0: Intel GM45 Host
        0x0000: Vendor ID: 8086 Product ID: 2a40
        0x0004: Command: 0006 Status ID: 0090
        0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 07
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
        0x00e0: Capability 0x09: Vendor Specific
 0:1:0: Intel GM45 PCIE
        0x0000: Vendor ID: 8086 Product ID: 2a41
        0x0004: Command: 0007 Status ID: 0010
        0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 07
        0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line Size: 10
        0x0010: 00000000
        0x0014: 00000000
        0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 1
                Secondary Latency Timer: 00
        0x001c: I/O Base: 70 I/O Limit: 70 Secondary Status: 0000
        0x0020: Memory Base: 9800 Memory Limit: 9af0
        0x0024: Prefetch Memory Base: 8001 Prefetch Memory Limit: 8ff1
        0x0028: Prefetch Memory Base Upper 32 Bits: 0000000f
        0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
        0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
        0x0038: Expansion ROM Base Address: 00000000
        0x003c: Interrupt Pin: 01 Line: 0a Bridge Control: 0008
        0x0088: Capability 0x0d: PCI-PCI
        0x0080: Capability 0x01: Power Management
        0x0090: Capability 0x05: Message Signaled Interrupts (MSI)
        0x00a0: Capability 0x10: PCI Express
 0:3:0: Intel GM45 HECI
        0x0000: Vendor ID: 8086 Product ID: 2a44
        0x0004: Command: 0006 Status ID: 0018
        0x0008: Class: 07 Subclass: 80 Interface: 00 Revision: 07
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR mem 64bit addr: 0x00000000fed17000
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 00 Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x01: Power Management
        0x008c: Capability 0x05: Message Signaled Interrupts (MSI)
 0:3:2: Intel GM45 PT IDER
        0x0000: Vendor ID: 8086 Product ID: 2a46
        0x0004: Command: 0005 Status ID: 00b0
        0x0008: Class: 01 Subclass: 01 Interface: 85 Revision: 07
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR io addr: 0x00008130
        0x0014: BAR io addr: 0x00008144
        0x0018: BAR io addr: 0x00008128
        0x001c: BAR io addr: 0x00008140
        0x0020: BAR io addr: 0x00008100
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 03 Line: 0b Min Gnt: 00 Max Lat: 00
        0x00c8: Capability 0x01: Power Management
        0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
 0:3:3: Intel GM45 AMT SOL
        0x0000: Vendor ID: 8086 Product ID: 2a47
        0x0004: Command: 0000 Status ID: 00b0
        0x0008: Class: 07 Subclass: 00 Interface: 02 Revision: 07
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR io addr: 0x00000000
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 02 Line: 00 Min Gnt: 00 Max Lat: 00
        0x00c8: Capability 0x01: Power Management
        0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
 0:25:0: Intel ICH9 IGP M AMT
        0x0000: Vendor ID: 8086 Product ID: 10f5
        0x0004: Command: 0007 Status ID: 0010
        0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR mem 32bit addr: 0x9b300000
        0x0014: BAR mem 32bit addr: 0x9b324000
        0x0018: BAR io addr: 0x000080e0
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
        0x00c8: Capability 0x01: Power Management
        0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
        0x00e0: Capability 0x13: Reserved
 0:26:0: Intel 82801I USB
        0x0000: Vendor ID: 8086 Product ID: 2937
        0x0004: Command: 0005 Status ID: 0290
        0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x000080c0
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x13: Reserved
 0:26:1: Intel 82801I USB
        0x0000: Vendor ID: 8086 Product ID: 2938
        0x0004: Command: 0005 Status ID: 0290
        0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x000080a0
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 02 Line: 0a Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x13: Reserved
 0:26:2: Intel 82801I USB
        0x0000: Vendor ID: 8086 Product ID: 2939
        0x0004: Command: 0005 Status ID: 0290
        0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x00008080
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 03 Line: 0b Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x13: Reserved
 0:26:7: Intel 82801I USB
        0x0000: Vendor ID: 8086 Product ID: 293c
        0x0004: Command: 0006 Status ID: 0290
        0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 03
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR mem 32bit addr: 0x9b326c00
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 04 Line: 0a Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x01: Power Management
        0x0058: Capability 0x0a: Debug Port
        0x0098: Capability 0x13: Reserved
 0:27:0: Intel 82801I HD Audio
        0x0000: Vendor ID: 8086 Product ID: 293e
        0x0004: Command: 0006 Status ID: 0010
        0x0008: Class: 04 Subclass: 03 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
        0x0010: BAR mem 64bit addr: 0x000000009b320000
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x01: Power Management
        0x0060: Capability 0x05: Message Signaled Interrupts (MSI)
        0x0070: Capability 0x10: PCI Express
 0:28:0: Intel 82801I PCIE
        0x0000: Vendor ID: 8086 Product ID: 2940
        0x0004: Command: 0007 Status ID: 0010
        0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
        0x0010: 00000000
        0x0014: 00000000
        0x0018: Primary Bus: 0 Secondary Bus: 2 Subordinate Bus: 2
                Secondary Latency Timer: 00
        0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 0000
        0x0020: Memory Base: 9b20 Memory Limit: 9b20
        0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
        0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
        0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
        0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
        0x0038: Expansion ROM Base Address: 00000000
        0x003c: Interrupt Pin: 01 Line: 0a Bridge Control: 0000
        0x0040: Capability 0x10: PCI Express
        0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
        0x0090: Capability 0x0d: PCI-PCI
        0x00a0: Capability 0x01: Power Management
 0:28:1: Intel 82801I PCIE
        0x0000: Vendor ID: 8086 Product ID: 2942
        0x0004: Command: 0007 Status ID: 0010
        0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
        0x0010: 00000000
        0x0014: 00000000
        0x0018: Primary Bus: 0 Secondary Bus: 3 Subordinate Bus: 3
                Secondary Latency Timer: 00
        0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 0000
        0x0020: Memory Base: 9b10 Memory Limit: 9b10
        0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
        0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
        0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
        0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
        0x0038: Expansion ROM Base Address: 00000000
        0x003c: Interrupt Pin: 02 Line: 0a Bridge Control: 0000
        0x0040: Capability 0x10: PCI Express
        0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
        0x0090: Capability 0x0d: PCI-PCI
        0x00a0: Capability 0x01: Power Management
 0:28:2: Intel 82801I PCIE
        0x0000: Vendor ID: 8086 Product ID: 2944
        0x0004: Command: 0007 Status ID: 0010
        0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
        0x0010: 00000000
        0x0014: 00000000
        0x0018: Primary Bus: 0 Secondary Bus: 4 Subordinate Bus: 68
                Secondary Latency Timer: 00
        0x001c: I/O Base: 50 I/O Limit: 60 Secondary Status: 0000
        0x0020: Memory Base: 9400 Memory Limit: 97f0
        0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
        0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
        0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
        0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
        0x0038: Expansion ROM Base Address: 00000000
        0x003c: Interrupt Pin: 03 Line: 0b Bridge Control: 0000
        0x0040: Capability 0x10: PCI Express
        0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
        0x0090: Capability 0x0d: PCI-PCI
        0x00a0: Capability 0x01: Power Management
 0:28:4: Intel 82801I PCIE
        0x0000: Vendor ID: 8086 Product ID: 2948
        0x0004: Command: 0007 Status ID: 0010
        0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
        0x0010: 00000000
        0x0014: 00000000
        0x0018: Primary Bus: 0 Secondary Bus: 69 Subordinate Bus: 133
                Secondary Latency Timer: 00
        0x001c: I/O Base: 30 I/O Limit: 40 Secondary Status: 0000
        0x0020: Memory Base: 9000 Memory Limit: 93f0
        0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
        0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
        0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
        0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
        0x0038: Expansion ROM Base Address: 00000000
        0x003c: Interrupt Pin: 01 Line: 0a Bridge Control: 0000
        0x0040: Capability 0x10: PCI Express
        0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
        0x0090: Capability 0x0d: PCI-PCI
        0x00a0: Capability 0x01: Power Management
 0:29:0: Intel 82801I USB
        0x0000: Vendor ID: 8086 Product ID: 2934
        0x0004: Command: 0005 Status ID: 0290
        0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x00008060
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x13: Reserved
 0:29:1: Intel 82801I USB
        0x0000: Vendor ID: 8086 Product ID: 2935
        0x0004: Command: 0005 Status ID: 0290
        0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x00008040
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 02 Line: 0a Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x13: Reserved
 0:29:2: Intel 82801I USB
        0x0000: Vendor ID: 8086 Product ID: 2936
        0x0004: Command: 0005 Status ID: 0290
        0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x00008020
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 03 Line: 0b Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x13: Reserved
 0:29:7: Intel 82801I USB
        0x0000: Vendor ID: 8086 Product ID: 293a
        0x0004: Command: 0006 Status ID: 0290
        0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 03
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR mem 32bit addr: 0x9b326800
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 04 Line: 0a Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x01: Power Management
        0x0058: Capability 0x0a: Debug Port
        0x0098: Capability 0x13: Reserved
 0:30:0: Intel 82801BAM Hub-to-PCI
        0x0000: Vendor ID: 8086 Product ID: 2448
        0x0004: Command: 0107 Status ID: 0010
        0x0008: Class: 06 Subclass: 04 Interface: 01 Revision: 93
        0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line Size: 00
        0x0010: 00000000
        0x0014: 00000000
        0x0018: Primary Bus: 0 Secondary Bus: 134 Subordinate Bus: 135
                Secondary Latency Timer: 20
        0x001c: I/O Base: 20 I/O Limit: 20 Secondary Status: 2280
        0x0020: Memory Base: 9b00 Memory Limit: 9b00
        0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
        0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
        0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
        0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
        0x0038: Expansion ROM Base Address: 00000000
        0x003c: Interrupt Pin: 00 Line: ff Bridge Control: 0002
        0x0050: Capability 0x0d: PCI-PCI
 0:31:0: Intel 82801IEM LPC
        0x0000: Vendor ID: 8086 Product ID: 2917
        0x0004: Command: 0007 Status ID: 0210
        0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
        0x00e0: Capability 0x09: Vendor Specific
 0:31:2: Intel 82801I AHCI
        0x0000: Vendor ID: 8086 Product ID: 2929
        0x0004: Command: 0007 Status ID: 02b0
        0x0008: Class: 01 Subclass: 06 Interface: 01 Revision: 03
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR io addr: 0x00008118
        0x0014: BAR io addr: 0x0000813c
        0x0018: BAR io addr: 0x00008110
        0x001c: BAR io addr: 0x00008138
        0x0020: BAR io addr: 0x00008000
        0x0024: BAR mem 32bit addr: 0x9b326000
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
        0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
        0x0070: Capability 0x01: Power Management
        0x00a8: Capability 0x12: Reserved
        0x00b0: Capability 0x13: Reserved
 1:0:0: NVIDIA unknown
        0x0000: Vendor ID: 10de Product ID: 065c
        0x0004: Command: 0007 Status ID: 0010
        0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: a1
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
        0x0010: BAR mem 32bit addr: 0x9a000000
        0x0014: BAR mem prefetchable 64bit addr: 0x0000000080000000
        0x001c: BAR mem 64bit addr: 0x0000000098000000
        0x0024: BAR io addr: 0x00007000
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
        0x0060: Capability 0x01: Power Management
        0x0068: Capability 0x05: Message Signaled Interrupts (MSI)
        0x0078: Capability 0x10: PCI Express
        0x00b4: Capability 0x09: Vendor Specific
 3:0:0: Intel WiFi Link 5300
        0x0000: Vendor ID: 8086 Product ID: 4236
        0x0004: Command: 0006 Status ID: 0010
        0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 00
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
        0x0010: BAR mem 64bit addr: 0x000000009b100000
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 8086 Product ID: 1011
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
        0x00c8: Capability 0x01: Power Management
        0x00d0: Capability 0x05: Message Signaled Interrupts (MSI)
        0x00e0: Capability 0x10: PCI Express
 134:9:0: Ricoh 5C832 Firewire
        0x0000: Vendor ID: 1180 Product ID: 0832
        0x0004: Command: 0006 Status ID: 0210
        0x0008: Class: 0c Subclass: 00 Interface: 10 Revision: 06
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 00 Min Gnt: 02 Max Lat: 04
        0x00dc: Capability 0x01: Power Management
 134:9:1: Ricoh 5C822 SD/MMC
        0x0000: Vendor ID: 1180 Product ID: 0822
        0x0004: Command: 0006 Status ID: 0210
        0x0008: Class: 08 Subclass: 05 Interface: 00 Revision: 25
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 10
        0x0010: BAR mem 32bit addr: 0x9b001b00
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 02 Line: 0a Min Gnt: 00 Max Lat: 00
        0x0080: Capability 0x01: Power Management
 134:9:2: Ricoh 5C843 MMC
        0x0000: Vendor ID: 1180 Product ID: 0843
        0x0004: Command: 0000 Status ID: 0210
        0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 14
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 02 Line: 00 Min Gnt: 00 Max Lat: 00
        0x0080: Capability 0x01: Power Management
 134:9:3: Ricoh 5C592 Memory Stick
        0x0000: Vendor ID: 1180 Product ID: 0592
        0x0004: Command: 0000 Status ID: 0210
        0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 14
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 02 Line: 00 Min Gnt: 00 Max Lat: 00
        0x0080: Capability 0x01: Power Management
 134:9:4: Ricoh 5C852 xD
        0x0000: Vendor ID: 1180 Product ID: 0852
        0x0004: Command: 0000 Status ID: 0210
        0x0008: Class: 08 Subclass: 80 Interface: 00 Revision: 14
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 02 Line: 00 Min Gnt: 00 Max Lat: 00
        0x0080: Capability 0x01: Power Management
 134:9:5: Ricoh 5C476 CardBus
        0x0000: Vendor ID: 1180 Product ID: 0476
        0x0004: Command: 0007 Status ID: 0210
        0x0008: Class: 06 Subclass: 07 Interface: 00 Revision: bb
        0x000c: BIST: 00 Header Type: 82 Latency Timer: 00 Cache Line Size: 00
        0x0010: Cardbus Control Registers Base Address: 00000000
        0x0018: Primary Bus: 0 Cardbus Bus: 0 Subordinate Bus: 0
                Cardbus Latency Timer: 00
        0x001c: Memory Base 0: 00000000
        0x0020: Memory Limit 0: 00000000
        0x0024: Memory Base 1: 00000000
        0x0028: Memory Limit 1: 00000000
        0x002c: I/O Base 0: 00000000
        0x0030: I/O Limit 0: 00000000
        0x0034: I/O Base 1: 00000000
        0x0038: I/O Limit 1: 00000000
        0x003c: Interrupt Pin: 02 Line: 00 Bridge Control: 0080
        0x0040: Subsystem Vendor ID: 103c Product ID: 30e7
        0x0044: 16-bit Legacy Mode Base Address: 00000001
        0x00dc: Capability 0x01: Power Management

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Peter Nicolai Mathias Hansteen
Jan Stary <[hidden email]> writes:

>> Actually a test with up to the second -current would be helpful to get a
>> baseline where we are at with this machine.
>
> What is the "second -current"?

"up to the second" -- as fresh as physically possible

- p
--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Ted Unangst-2
In reply to this post by Jan Stary
On Wed, Jul 28, 2010 at 4:36 PM, Jan Stary <[hidden email]> wrote:
>> Actually a test with up to the second -current would be helpful to get a
>> baseline where we are at with this machine.
>
> What is the "second -current"?

-current that is current as of this second.

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Jan Stary
In reply to this post by Peter Nicolai Mathias Hansteen
On Jul 28 23:06:48, Peter N. M. Hansteen wrote:
> Jan Stary <[hidden email]> writes:
>
> >> Actually a test with up to the second -current would be helpful to get a
> >> baseline where we are at with this machine.
> >
> > What is the "second -current"?
>
> "up to the second" -- as fresh as physically possible

aaargh, sorri me not gut english.

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Richard Toohey
In reply to this post by Peter Nicolai Mathias Hansteen
Quoting "Peter N. M. Hansteen" <[hidden email]>:

> Jan Stary <[hidden email]> writes:
>
> >> Actually a test with up to the second -current would be helpful to
> get a
> >> baseline where we are at with this machine.
> >
> > What is the "second -current"?
>
> "up to the second" -- as fresh as physically possible

That's what hyphens are for - so "up-to-the-second" would show that the words
are related.

>
> - p
> --
> Peter N. M. Hansteen, member of the first RFC 1149 implementation team
> http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
> "Remember to set the evil bit on all malicious network traffic"
> delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Jiri B.
In reply to this post by Marco Peereboom
On Mon, 26 Jul 2010 12:52:35 -0500
Marco Peereboom <[hidden email]> wrote:

> I am 25% there with pledges.  So if you are interested in getting
> these 2 bugs fixed send me an email with the pledge amount. I won't
> accept cash until we have enough to actually order machines.

150 USD sent. Thank you very much for you time to help us solving this
issues.

jirib

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Jan Stary
In reply to this post by Jan Stary
> 'apmd -C' works OK: the CPU scales appropriately based on load;
> the battery status is reported correctly; the monitor dims/brightens
> when AC is plugged out/in.

This is not entirely true. It worked yesterday after I re(plugged) the
AC power. Now I see that immediately after boot (either on AC, or on
battery), the battery is not even detected as present:

$ apm
Battery state: absent, 0% remaining, unknown life estimate
A/C adapter state: not connected
Performance adjustment mode: cool running (800 MHz)

After I plug the AC out and in (or in and out),
it usually starts to work:

$ apm
Battery state: high, 100% remaining, 172 minutes life estimate
A/C adapter state: connected
Performance adjustment mode: cool running (800 MHz)

$ apm
Battery state: high, 100% remaining, 172 minutes life estimate
A/C adapter state: not connected
Performance adjustment mode: cool running (800 MHz)

Yet on another boot, it's

$ apm
Battery state: high, 0% remaining, unknown life estimate
A/C adapter state: connected
Performance adjustment mode: cool running (800 MHz)

$ apm
Battery state: high, 0% remaining, unknown life estimate
A/C adapter state: not connected
Performance adjustment mode: cool running (800 MHz)

i.e. only the AC state is reported correctly.

Please note that while this happens, dmesg says:

acpibat0 at acpi0: BAT0 not present
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline

regardless of the actual state, while previous kernels said

acpibat0 at acpi0: BAT0 model "Primary" serial 00903 2009/01/13 type LIon oem "Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online


> (3)
> 'apm -S' puts the machine to standby; everything goes black,
> just the power button's led starts blinking. After
> pressing the power button everything comes back up,
> including the network connections (of em0; don't know
> about iwn0, I am not in a reach of a wifi network
> right now; will test tomorrow).

I am using the iwn-firmware-5.5 as referenced in iwn(4).

Before apm -S:

iwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:21:6a:0f:b2:8e
        priority: 4
        groups: wlan egress
        media: IEEE802.11 autoselect (DS1 mode 11g)
        status: active
        ieee80211: nwid wififjfi chan 4 bssid 00:17:df:94:a8:81 169dB
        inet6 fe80::221:6aff:fe0f:b28e%iwn0 prefixlen 64 scopeid 0x2
        inet 172.16.21.117 netmask 0xffffff00 broadcast 172.16.21.255

After resume:

iwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:21:6a:0f:b2:8e
        priority: 4
        groups: wlan
        media: IEEE802.11 autoselect (DS1 mode 11g)
        status: active
        ieee80211: nwid wififjfi chan 1 bssid 00:19:a9:ce:01:11 173dB
        inet6 fe80::221:6aff:fe0f:b28e%iwn0 prefixlen 64 scopeid 0x2
        inet 172.16.21.117 netmask 0xffffff00 broadcast 172.16.21.255

but the connections seem to be dead - for example the ssh connection
to outside I made before the apm -S does not react to nothing. (I am
also logged to the HP remotely via ethernet now, because the wifi network
I am on now does not make the HP routable from outside. The ethernet
network does.)


> One exception is the monitor: it is still dark;
> I can log in remotely though, bring my
> tmux sessions back up etc. The tmux sessions come back
> up with the windows reduced (as happens in a larger
> xterm when the same session is still open with smaller
> 80x25 windows elsewhere).
>
> I was at the console when I issued 'apm -S', X was not running.
> If it makes any difference, I issued the 'apm -S' from within
> root's tmux session.

The behaviour is the same when I issue 'apm -S' when
X is running (either from within an xterm, or from
a console while X is running).


Some further hardware notes:


No PCMCIA card was ever detected on this machine.
No SD card was ever detected on this machine.
I have no xD or MMC card to test.

sdhc0 at pci6 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x25: apic 1 int 22 (irq 10)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x14 at pci6 dev 9 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x14 at pci6 dev 9 function 3 not configured
"Ricoh 5C852 xD" rev 0x14 at pci6 dev 9 function 4 not configured
cbb0 at pci6 dev 9 function 5 "Ricoh 5C476 CardBus" rev 0xbb: apic 1 int 22 (irq 10)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 135 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
"RICOH, Bay8Controller" (manufacturer 0x0, product 0x0) at pcmcia0 function 0 not configured


I am using the uvideo-firmware-1.2.2p1 package as referenced in uvideo(4).
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Chicony Electronics Co., Ltd. CKA7216" rev 2.00/32.18 addr 2
video0 at uvideo0

Trying to use the uvideo to record a short movie with
$ ffmpeg -y -t 15 -an -f video4linux2 -r 25 -s vga vcodec copy /tmp/out.avi
results in a broken file with a few freeze-frames captured. Trying again
with different framerate (-r) and size (-s) makes it a bit better or
a bit worse, but after a few runs it just says

[video4linux2 @ 0x7d3b5080]Device does not support mmap
/dev/video0: Input/output error

and the camera's LED does even turn on
(which it normally does while capturing).

Trying fswebcam(1) without arguments at this point makes the machine freeze.


This laptop also has a fingerprint sensor:
ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
Any support planned for this? (Not that I need it, but my bsd-converted
wife would undoubtedly find it a sign of general user-friendliness :-)


What else should I test?


        Thank you for your time

                Jan

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Marco Peereboom
In reply to this post by matteo filippetto
Yes please
acpidump -o hp4520s
pcidump -v
dmesg

tar all files up and send to me and jordan

On Wed, Jul 28, 2010 at 06:21:36PM +0200, matteo filippetto wrote:

> > Then mail me acpidump -o hp8350 results + dmesg + pcidump -v
> >
>
> Hi,
>
> I have an hp ProBook 4520s that has problem with acpi (boot only with
> acpi disable).
>
> Do you need my results for those commands?
>
> Best regards.
>
> --
> Matteo Filippetto

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Marco Peereboom
In reply to this post by Jan Stary
On Wed, Jul 28, 2010 at 11:18:13PM +0200, Jan Stary wrote:

> On Jul 28 23:06:48, Peter N. M. Hansteen wrote:
> > Jan Stary <[hidden email]> writes:
> >
> > >> Actually a test with up to the second -current would be helpful to get a
> > >> baseline where we are at with this machine.
> > >
> > > What is the "second -current"?
> >
> > "up to the second" -- as fresh as physically possible
>
> aaargh, sorri me not gut english.
>

:-)

So please update from cvs and try again.  Some things went in that might
have helped this laptop.

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Jan Stary
> So please update from cvs and try again.  Some things went in that might
> have helped this laptop.

I just did - see http://stare.cz/~hans/.tmp/hp8530w.tar

The acpitz still claims the CPU is 5731C and shuts down.
It seems to happen more often when on battery.
I disabled acpitz again.

BTW, is there some way to say which of

        acpitz0 at acpi0: critical temperature 115 degC
        acpitz1 at acpi0: critical temperature 105 degC
        acpitz2 at acpi0: critical temperature 112 degC
        acpitz3 at acpi0: critical temperature 112 degC
        acpitz4 at acpi0: critical temperature 90 degC
        acpitz5 at acpi0: critical temperature 112 degC

is the (alleged) temperature of what?


The acpibat and acpiac were properly recognized before I disabled acpitz:
 
acpibat0 at acpi0: BAT0 model "Primary" serial 00903 2009/01/13 type LIon oem "Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online

Now, with acpitz disabled, it's *sometimes*

acpibat0 at acpi0: BAT0 model "Primary" serial 34704 2002/12/16
type LIon oem "Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline

eventhough the AC is online, and apm only correctly reports
about AC and BAT after I plug AC in and out a few times.

Generaly, it seems to be more "correct" when on AC.

suspend/resume stiil the same, specifically,
everything comes back up except the monitor.

                Jan


dmesg when acpitz enabled follows;
upon latest boot, the dmesg with acpitz disabled differs
only in the acpitz lines being "not configured".

OpenBSD 4.8-beta (GENERIC.MP) #0: Thu Jul 29 17:02:14 CEST 2010
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error bb<clock_battery,config_unit,memory_size,fixed_disk>
cpu0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
real mem  = 2125561856 (2027MB)
avail mem = 2080784384 (1984MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 11/10/08, SMBIOS rev. 2.4 @ 0x7edc4000 (21 entries)
bios0: vendor Hewlett-Packard version "68PDV Ver. F.06" date 12/15/2008
bios0: Hewlett-Packard HP EliteBook 8530w
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP HPET APIC MCFG TCPA SSDT SLIC SSDT DMAR ASF! SSDT SSDT SSDT
acpi0: wakeup devices LANC(S5) HDEF(S4) RP02(S5) WNIC(S5) RP03(S5) ECF0(S5) RP05(S5) ECF0(S5) RP06(S5) NIC_(S5) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) USB6(S3) U6RM(S3) EHC1(S3) EHC2(S3) PCIB(S5) HST1(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz ("GenuineIntel" 686-class) 2.53 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 1 (PEGP)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus 3 (RP02)
acpiprt3 at acpi0: bus 4 (RP03)
acpiprt4 at acpi0: bus 69 (RP05)
acpiprt5 at acpi0: bus 134 (PCIB)
acpiprt6 at acpi0: bus 0 (PCI0)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpipwrres0 at acpi0: APPR
acpipwrres1 at acpi0: COMP
acpipwrres2 at acpi0: LPP_
acpipwrres3 at acpi0: PGF0
acpitz0 at acpi0: critical temperature 115 degC
acpitz1 at acpi0: critical temperature 105 degC
acpitz2 at acpi0: critical temperature 112 degC
acpitz3 at acpi0: critical temperature 112 degC
acpitz4 at acpi0: critical temperature 90 degC
acpitz5 at acpi0: critical temperature 112 degC
acpibat0 at acpi0: BAT0 model "Primary" serial 00903 2009/01/13 type LIon oem "Hewlett-Packard"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: LID_
acpivideo0 at acpi0: DGFX
acpivout0 at acpivideo0: LCD_
acpivout1 at acpivideo0: CRT_
acpivout2 at acpivideo0: DVI_
acpivout3 at acpivideo0: DD04
bios0: ROM list: 0xc0000/0xe200 0xce800/0x1000 0xcf800/0x1000
cpu0: Enhanced SpeedStep 2528 MHz: speeds: 2534, 2533, 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
ppb0 at pci0 dev 1 function 0 "Intel GM45 PCIE" rev 0x07: apic 1 int 16 (irq 10)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x065c rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel GM45 PT IDER" rev 0x07: DMA (unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 1 int 18 (irq 11) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel GM45 AMT SOL" rev 0x07 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: apic 1 int 22 (irq 10), address 00:23:7d:e7:ac:60
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16 (irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17 (irq 10)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq 11)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: apic 1 int 17 (irq 10)
azalia0: codecs: Analog Devices AD1984A, AT&T/Lucent/0x1040, using Analog Devices AD1984A
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq 10)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 17 (irq 10)
pci3 at ppb2 bus 3
iwn0 at pci3 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: apic 1 int 17 (irq 10), MIMO 3T3R, MoW, address 00:21:6a:0f:b2:8e
ppb3 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x03: apic 1 int 18 (irq 11)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 16 (irq 10)
pci5 at ppb4 bus 69
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq 10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 22 (irq 10)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18 (irq 11)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 20 (irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci6 at ppb5 bus 134
"Ricoh 5C832 Firewire" rev 0x06 at pci6 dev 9 function 0 not configured
sdhc0 at pci6 dev 9 function 1 "Ricoh 5C822 SD/MMC" rev 0x25: apic 1 int 22 (irq 10)
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x14 at pci6 dev 9 function 2 not configured
"Ricoh 5C592 Memory Stick" rev 0x14 at pci6 dev 9 function 3 not configured
"Ricoh 5C852 xD" rev 0x14 at pci6 dev 9 function 4 not configured
cbb0 at pci6 dev 9 function 5 "Ricoh 5C476 CardBus" rev 0xbb: apic 1 int 22 (irq 10)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 135 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: apic 1 int 21 (irq 10), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Hitachi HTS72322, FCDO> SCSI3 0/direct fixed
sd0: 238475MB, 512 bytes/sec, 488397168 sec total
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GSA-T50L, SC04> ATAPI 5/cdrom removable
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
"RICOH, Bay8Controller" (manufacturer 0x0, product 0x0) at pcmcia0 function 0 not configured
uvideo0 at uhub0 port 5 configuration 1 interface 0 "Chicony Electronics Co., Ltd. CKA7216" rev 2.00/32.18 addr 2
video0 at uvideo0
ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
ubt0 at uhub2 port 1 "Broadcom Corp HP Integrated Module" rev 2.00/1.00 addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Miod Vallat
> > So please update from cvs and try again.  Some things went in that might
> > have helped this laptop.
>
> I just did - see http://stare.cz/~hans/.tmp/hp8530w.tar
>
> The acpitz still claims the CPU is 5731C and shuts down.
> It seems to happen more often when on battery.
> I disabled acpitz again.

Is this with sys/dev/acpi/acpitz.c r1.39 or an older version?

Miod

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Jan Stary
On Jul 29 16:35:14, Miod Vallat wrote:

> > > So please update from cvs and try again.  Some things went in that might
> > > have helped this laptop.
> >
> > I just did - see http://stare.cz/~hans/.tmp/hp8530w.tar
> >
> > The acpitz still claims the CPU is 5731C and shuts down.
> > It seems to happen more often when on battery.
> > I disabled acpitz again.
>
> Is this with sys/dev/acpi/acpitz.c r1.39 or an older version?

/* $OpenBSD: acpitz.c,v 1.39 2010/07/27 04:28:36 marco Exp $ */

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Miod Vallat
> On Jul 29 16:35:14, Miod Vallat wrote:
> > > > So please update from cvs and try again.  Some things went in that might
> > > > have helped this laptop.
> > >
> > > I just did - see http://stare.cz/~hans/.tmp/hp8530w.tar
> > >
> > > The acpitz still claims the CPU is 5731C and shuts down.
> > > It seems to happen more often when on battery.
> > > I disabled acpitz again.
> >
> > Is this with sys/dev/acpi/acpitz.c r1.39 or an older version?
>
> /* $OpenBSD: acpitz.c,v 1.39 2010/07/27 04:28:36 marco Exp $ */
>
Can you try the following diff and see if it spams your dmesg:

Index: acpitz.c
===================================================================
RCS file: /cvs/src/sys/dev/acpi/acpitz.c,v
retrieving revision 1.39
diff -u -p -r1.39 acpitz.c
--- acpitz.c 27 Jul 2010 04:28:36 -0000 1.39
+++ acpitz.c 29 Jul 2010 16:46:14 -0000
@@ -402,8 +402,31 @@ acpitz_getreading(struct acpitz_softc *s
 {
  u_int64_t val;
 
+#if 0
  if (!aml_evalinteger(sc->sc_acpi, sc->sc_devnode, name, 0, NULL, &val))
  return (val);
+#else
+ struct aml_value res;
+ struct aml_node *node;
+ int rc;
+
+ node = aml_searchname(sc->sc_devnode, name);
+ rc = aml_evalnode(sc->sc_acpi, node, 0, NULL, &res);
+ if (rc == 0) {
+ switch (res.type) {
+ default:
+ printf("%s(%s): type %d\n", __func__, name, res.type);
+ break;
+ case AML_OBJTYPE_INTEGER:
+ case AML_OBJTYPE_BUFFER:
+ case AML_OBJTYPE_STRING:
+ break;
+ }
+ val = aml_val2int(&res);
+ aml_freevalue(&res);
+ return val;
+ }
+#endif
 
  return (-1);
 }

Reply | Threaded
Open this post in threaded view
|

Re: HP laptops again

Marco Peereboom
On Thu, Jul 29, 2010 at 10:44:44PM +0000, Miod Vallat wrote:

> > On Jul 29 16:35:14, Miod Vallat wrote:
> > > > > So please update from cvs and try again.  Some things went in that might
> > > > > have helped this laptop.
> > > >
> > > > I just did - see http://stare.cz/~hans/.tmp/hp8530w.tar
> > > >
> > > > The acpitz still claims the CPU is 5731C and shuts down.
> > > > It seems to happen more often when on battery.
> > > > I disabled acpitz again.
> > >
> > > Is this with sys/dev/acpi/acpitz.c r1.39 or an older version?
> >
> > /* $OpenBSD: acpitz.c,v 1.39 2010/07/27 04:28:36 marco Exp $ */
> >
> Can you try the following diff and see if it spams your dmesg:
>
> Index: acpitz.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/acpi/acpitz.c,v
> retrieving revision 1.39
> diff -u -p -r1.39 acpitz.c
> --- acpitz.c 27 Jul 2010 04:28:36 -0000 1.39
> +++ acpitz.c 29 Jul 2010 16:46:14 -0000
> @@ -402,8 +402,31 @@ acpitz_getreading(struct acpitz_softc *s
>  {
>   u_int64_t val;
>  
> +#if 0
>   if (!aml_evalinteger(sc->sc_acpi, sc->sc_devnode, name, 0, NULL, &val))
>   return (val);
> +#else
> + struct aml_value res;
> + struct aml_node *node;
> + int rc;
> +
> + node = aml_searchname(sc->sc_devnode, name);
> + rc = aml_evalnode(sc->sc_acpi, node, 0, NULL, &res);
> + if (rc == 0) {
> + switch (res.type) {
> + default:
> + printf("%s(%s): type %d\n", __func__, name, res.type);
> + break;
> + case AML_OBJTYPE_INTEGER:
> + case AML_OBJTYPE_BUFFER:
> + case AML_OBJTYPE_STRING:
> + break;
> + }
> + val = aml_val2int(&res);

val2int is kind of verboten.

> + aml_freevalue(&res);
> + return val;
> + }
> +#endif
>  
>   return (-1);
>  }

12