HP 9000 K200 (819) ...

classic Classic list List threaded Threaded
14 messages Options
Reply | Threaded
Open this post in threaded view
|

HP 9000 K200 (819) ...

Rob Sciuk
Is there anyone here?  I'm attempting an openbsd 4.2 install on a
Kittyhawk, HP9K K200, and I get as far as the time check on the boot CD,
when the kernel just hangs ...


WARNING:  Clock gained 18 days -- CHECK AND RESET THE DATE!
<the rest is silence>


Any ideas??

Cheers,
Rob Sciuk

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ...

Martin Reindl-3
Rob Sciuk <[hidden email]> wrote:

> Is there anyone here?  I'm attempting an openbsd 4.2 install on a
> Kittyhawk, HP9K K200, and I get as far as the time check on the boot CD,
> when the kernel just hangs ...
>
>
> WARNING:  Clock gained 18 days -- CHECK AND RESET THE DATE!
> <the rest is silence>
>
>
> Any ideas??
>

K-class PA-RISC machines are not really supported (yet?). At least send
the full dmesg you got.

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ...

Mark Kettenis
> Date: Sat, 8 Dec 2007 09:43:19 +0100
> From: Martin Reindl <[hidden email]>
>
> Rob Sciuk <[hidden email]> wrote:
>
> > Is there anyone here?  I'm attempting an openbsd 4.2 install on a
> > Kittyhawk, HP9K K200, and I get as far as the time check on the boot CD,
> > when the kernel just hangs ...
> >
> >
> > WARNING:  Clock gained 18 days -- CHECK AND RESET THE DATE!
> > <the rest is silence>
> >
> >
> > Any ideas??
> >
>
> K-class PA-RISC machines are not really supported (yet?). At least send
> the full dmesg you got.

While the machines are indeed currently unsupported, there is not real
reason why they couldn't run OpenBSD, and I'm really interested in
making it so.  If you want to help, please send us a complete dmesg.
It shouldn't be too difficult to capture when if you're using a serial
console.

Cheers,

Mark

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ...

Rob Sciuk
In reply to this post by Martin Reindl-3
On Sat, 8 Dec 2007, Martin Reindl wrote:
k>>
>>
>> Any ideas??
>>
>
> K-class PA-RISC machines are not really supported (yet?). At least send
> the full dmesg you got.
>

I'll post the dmesg on Monday (machine is at my office).  Sorry, I should
have figured enough to do this.

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ...

Rob Sciuk
On Sat, 8 Dec 2007, Rob Sciuk wrote:

> On Sat, 8 Dec 2007, Martin Reindl wrote:
> k>>
>>>
>>> Any ideas??
>>>
>>
>> K-class PA-RISC machines are not really supported (yet?). At least send
>> the full dmesg you got.
>>
>
> I'll post the dmesg on Monday (machine is at my office).  Sorry, I should
> have figured enough to do this.
>

IPL session (search) and dmesg output from K200 (819) attached ...

Sorry for the delay, the DMESG does not get too far along, and although
I've got dhcpd/bootp set up with the Dec 6th snapshot .lif image, I cannot
seem to get either the 10BT or the AUI with 10B2 to bootp (yes, I still
have a 10Base2 network) working, although the hpux seems to recognize the
network ok ... at least the 10B2 aui).  So, I'm using the install.iso on a
freshly burned cdr.

I've reset the clock (intially out by 1700+ days), and now it appears to only be
"out" by 21 days, but that's as far as I seem to get with openbsd.  I used to have
an earlier OpenBSD running on a 712, but I've been playing with Debian recently,
so that machine has been overwritten ... I'll go ahead and put OpenBSD back on it
though, perhaps it will help, or at least give me a system where I can compile kernels
for the Kittyhawk ...

Any ideas?

[demime 1.01d removed an attachment of type APPLICATION/octet-stream which had a name of session_log]

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ...

Rob Sciuk
On Mon, 10 Dec 2007, Rob Sciuk wrote:

> IPL session (search) and dmesg output from K200 (819) attached ...
>
> Sorry for the delay, the DMESG does not get too far along, and although
> I've got dhcpd/bootp set up with the Dec 6th snapshot .lif image, I cannot
> seem to get either the 10BT or the AUI with 10B2 to bootp (yes, I still
> have a 10Base2 network) working, although the hpux seems to recognize the
> network ok ... at least the 10B2 aui).  So, I'm using the install.iso on a
> freshly burned cdr.
>
> I've reset the clock (intially out by 1700+ days), and now it appears to only be
> "out" by 21 days, but that's as far as I seem to get with openbsd.  I used to have
> an earlier OpenBSD running on a 712, but I've been playing with Debian recently,
> so that machine has been overwritten ... I'll go ahead and put OpenBSD back on it
> though, perhaps it will help, or at least give me a system where I can compile kernels
> for the Kittyhawk ...
>
> Any ideas?
>
> [demime 1.01d removed an attachment of type APPLICATION/octet-stream
> which had a name of session_log]

Hmmm ... so much for the session_log ... here it is, *INLINE*, so
hopefully the demimer will leave it alone ...


Firmware Version  2.9

Duplex Console IO Dependent Code (IODC) revision 4

------------------------------------------------------------------------------
    (c) Copyright 1990-1998, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------

   Processor   Speed            State           CoProcessor State  Cache Size
   ---------  --------   ---------------------  -----------------  ----------

       0      100  MHz   Active                 Functional          256 KB
       1      100  MHz   Idle                   Functional          256 KB

   Central Bus Speed (in MHz)  :        100
   Available Memory (bytes)    :  536870912
   Good Memory Required (bytes):   19648512


    Primary boot path:    10/0.6   (dec)
    Alternate boot path:  10/12/5.2   (dec)
    Console path:         10/4/0.0   (dec)
    Keyboard path:        10/12/7.0   (dec)


Processor is starting autoboot process.

To discontinue, press any key within 10 seconds.

Boot terminated.


------- Main Menu -------------------------------------------------------------

         Command                         Description
         -------                         -----------

         BOot [PRI|ALT|<path>]           Boot from specified path
         PAth [PRI|ALT] [<path>]         Display or modify a path
         SEArch [DIsplay|IPL] [<path>]   Search for boot devices

         COnfiguration menu              Displays or sets boot values
         INformation menu                Displays hardware information
         SERvice menu                    Displays service commands

         DIsplay                         Redisplay the current menu
         HElp [<menu>|<command>]         Display help for menu or command
         RESET                           Restart the system
-------
Main Menu: Enter command or menu > search

Searching for potential boot device(s)
This may take several minutes.

To discontinue search, press any key (termination may not be immediate).


    Path Number           Device Path (dec)        Device Type
    -----------           -----------------        -----------
    P0                    10/0.6                   Random access media
    P1                    10/0.5                   Random access media
    P2                    10/0.4                   Random access media
    P3                    10/0.3                   Random access media
    P4                    10/4/12.0                LAN Module
    P5                    10/12/5.2                Random access media
    P6                    10/12/5.0                Sequential access media
    P7                    10/12/6.0                LAN Module


Main Menu: Enter command or menu > boot alt
Interact with IPL (Y or N)?> y

Booting...
Boot IO Dependent Code (IODC) revision 0


HARD Booted.

>> OpenBSD/hppa CDBOOT 0.1
booting dk2a:/bsd.rd: |/-\|/-\2396160|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|
 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/+507904-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+2670592\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/
 -\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|
 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\
 |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+385024|/=0x6e6148
SPID bits: 0x0, error = -2
pdc_coproc: 0xc0, 0xc0; model b rev 1
[ bsd ELF symbol table not valid: symtab unaligned ]
[ no symbol table formats found ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
  The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.2-current (RAMDISK) #546: Sun Nov 18 15:16:08 MST 2007
     [hidden email]:/usr/src/sys/arch/hppa/compile/RAMDISK
HP 9000/819/K200 (KittyHawk DC2 100) PA-RISC 1.1a
real mem = 536870912 (524288 reserved for PROM, 8269824 used by OpenBSD)
avail mem = 517582848
mainbus0 at root [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0: not available
biomask 0x3 netmask 0x3 ttymask 0x13
bootpath: 10/12/5.2 class=1 flags=0 hpa=0xffd06000 spa=0x0 io=0xc000
rd0: fixed, 5120 blocks
root on rd0a swap on rd0b dump on rd0b
WARNING: clock gained 21 days -- CHECK AND RESET THE DATE!
~[scanner].Connected.
Connected.

Disconnected.

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ...

Mark Kettenis
> Date: Mon, 10 Dec 2007 13:15:13 -0500 (EST)
> From: Rob Sciuk <[hidden email]>

> SPID bits: 0x0, error = -2
> pdc_coproc: 0xc0, 0xc0; model b rev 1
> [ bsd ELF symbol table not valid: symtab unaligned ]
> [ no symbol table formats found ]
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>   The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2007 OpenBSD. All rights reserved.  http://www.OpenBSD.org
>
> OpenBSD 4.2-current (RAMDISK) #546: Sun Nov 18 15:16:08 MST 2007
>      [hidden email]:/usr/src/sys/arch/hppa/compile/RAMDISK
> HP 9000/819/K200 (KittyHawk DC2 100) PA-RISC 1.1a
> real mem = 536870912 (524288 reserved for PROM, 8269824 used by OpenBSD)
> avail mem = 517582848
> mainbus0 at root [flex fff80000]
> pdc0 at mainbus0
> power0 at mainbus0: not available
> biomask 0x3 netmask 0x3 ttymask 0x13
> bootpath: 10/12/5.2 class=1 flags=0 hpa=0xffd06000 spa=0x0 io=0xc000
> rd0: fixed, 5120 blocks
> root on rd0a swap on rd0b dump on rd0b
> WARNING: clock gained 21 days -- CHECK AND RESET THE DATE!

Hmm, I'm sure that machine has more hardware devices than this dmesg shows ;)

Looks like device enumeration simply fails on your machine.  I vaguely
remember seeing some Linux code that had some workarounds for firmware
calls for the KittyHawk.  I'll see if I can come up with a diff.

Meanwhile, could you try a verbose boot?  Say Y to the "Interact with
IPL?" question, then at the OpenBSD bootloader prompt type "boot -c
bsd.rd", and at the UKC> prompt say "verbose" and "quit".

Thanks,

Mark

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ...

Rob Sciuk
On Tue, 11 Dec 2007, Mark Kettenis wrote:

> Date: Tue, 11 Dec 2007 11:31:48 +0100 (CET)
> From: Mark Kettenis <[hidden email]>
> To: [hidden email]
> Cc: [hidden email]
> Subject: Re: HP 9000 K200 (819) ...
>
>> Date: Mon, 10 Dec 2007 13:15:13 -0500 (EST)
>> From: Rob Sciuk <[hidden email]>
>
>> SPID bits: 0x0, error = -2
>> pdc_coproc: 0xc0, 0xc0; model b rev 1
>> [ bsd ELF symbol table not valid: symtab unaligned ]
>> [ no symbol table formats found ]
>> Copyright (c) 1982, 1986, 1989, 1991, 1993
>>   The Regents of the University of California.  All rights reserved.
>> Copyright (c) 1995-2007 OpenBSD. All rights reserved.  http://www.OpenBSD.org
>>
>> OpenBSD 4.2-current (RAMDISK) #546: Sun Nov 18 15:16:08 MST 2007
>>      [hidden email]:/usr/src/sys/arch/hppa/compile/RAMDISK
>> HP 9000/819/K200 (KittyHawk DC2 100) PA-RISC 1.1a
>> real mem = 536870912 (524288 reserved for PROM, 8269824 used by OpenBSD)
>> avail mem = 517582848
>> mainbus0 at root [flex fff80000]
>> pdc0 at mainbus0
>> power0 at mainbus0: not available
>> biomask 0x3 netmask 0x3 ttymask 0x13
>> bootpath: 10/12/5.2 class=1 flags=0 hpa=0xffd06000 spa=0x0 io=0xc000
>> rd0: fixed, 5120 blocks
>> root on rd0a swap on rd0b dump on rd0b
>> WARNING: clock gained 21 days -- CHECK AND RESET THE DATE!
>
> Hmm, I'm sure that machine has more hardware devices than this dmesg shows ;)
>
> Looks like device enumeration simply fails on your machine.  I vaguely
> remember seeing some Linux code that had some workarounds for firmware
> calls for the KittyHawk.  I'll see if I can come up with a diff.
>
> Meanwhile, could you try a verbose boot?  Say Y to the "Interact with
> IPL?" question, then at the OpenBSD bootloader prompt type "boot -c
> bsd.rd", and at the UKC> prompt say "verbose" and "quit".
>
> Thanks,
>
Mark,

How does one get OpenBSD to prompt at the bootloader?  I've tried hitting
space and a few other keys, but this apparently had no effect, and the
boot just proceeded on without me ... and as for the UKC> prompt ... I
never saw it ...

Cheers,
Rob.

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ...

Mark Kettenis
> Date: Tue, 11 Dec 2007 15:24:40 -0500 (EST)
> From: Rob Sciuk <[hidden email]>
>
> On Tue, 11 Dec 2007, Mark Kettenis wrote:
>
> > Date: Tue, 11 Dec 2007 11:31:48 +0100 (CET)
> > From: Mark Kettenis <[hidden email]>
> > To: [hidden email]
> > Cc: [hidden email]
> > Subject: Re: HP 9000 K200 (819) ...
> >
> >> Date: Mon, 10 Dec 2007 13:15:13 -0500 (EST)
> >> From: Rob Sciuk <[hidden email]>
> >
> >> SPID bits: 0x0, error = -2
> >> pdc_coproc: 0xc0, 0xc0; model b rev 1
> >> [ bsd ELF symbol table not valid: symtab unaligned ]
> >> [ no symbol table formats found ]
> >> Copyright (c) 1982, 1986, 1989, 1991, 1993
> >>   The Regents of the University of California.  All rights reserved.
> >> Copyright (c) 1995-2007 OpenBSD. All rights reserved.  http://www.OpenBSD.org
> >>
> >> OpenBSD 4.2-current (RAMDISK) #546: Sun Nov 18 15:16:08 MST 2007
> >>      [hidden email]:/usr/src/sys/arch/hppa/compile/RAMDISK
> >> HP 9000/819/K200 (KittyHawk DC2 100) PA-RISC 1.1a
> >> real mem = 536870912 (524288 reserved for PROM, 8269824 used by OpenBSD)
> >> avail mem = 517582848
> >> mainbus0 at root [flex fff80000]
> >> pdc0 at mainbus0
> >> power0 at mainbus0: not available
> >> biomask 0x3 netmask 0x3 ttymask 0x13
> >> bootpath: 10/12/5.2 class=1 flags=0 hpa=0xffd06000 spa=0x0 io=0xc000
> >> rd0: fixed, 5120 blocks
> >> root on rd0a swap on rd0b dump on rd0b
> >> WARNING: clock gained 21 days -- CHECK AND RESET THE DATE!
> >
> > Hmm, I'm sure that machine has more hardware devices than this dmesg shows ;)
> >
> > Looks like device enumeration simply fails on your machine.  I vaguely
> > remember seeing some Linux code that had some workarounds for firmware
> > calls for the KittyHawk.  I'll see if I can come up with a diff.
> >
> > Meanwhile, could you try a verbose boot?  Say Y to the "Interact with
> > IPL?" question, then at the OpenBSD bootloader prompt type "boot -c
> > bsd.rd", and at the UKC> prompt say "verbose" and "quit".
> >
> > Thanks,
> >
> Mark,
>
> How does one get OpenBSD to prompt at the bootloader?  I've tried hitting
> space and a few other keys, but this apparently had no effect, and the
> boot just proceeded on without me ... and as for the UKC> prompt ... I
> never saw it ...

Oh, I guess my instructions were a bit incomplete.  When you reboot
the machine, interrupt the boot when it says:

    To discontinue, press any key within 10 seconds.

Then at the Main Menu prompt, type "boot" and answer the:

    Interact with IPL (Y, N, Q)?>

question with "Y".  That will load the OpenBSD bootloader and pause
for a few seconds at the

    boot>

prompt.  There you can type "boot bsd.rd -c", which will give you the

    UKC>

prompt.

Cheers,

Mark

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ...

Rob Sciuk
On Tue, 11 Dec 2007, Mark Kettenis wrote:

>
>    To discontinue, press any key within 10 seconds.
>
> Then at the Main Menu prompt, type "boot" and answer the:
>
>    Interact with IPL (Y, N, Q)?>
>
> question with "Y".  That will load the OpenBSD bootloader and pause
> for a few seconds at the

Mark, Sorry, but when I answer Y to interact with the IPL, it then says

Booting ...
Boot IO dependant code (IODC) revision 0

and when the OpenBSD header appears, it does not give me a chance to enter
anything, but rather just boots bsd.rd in the normal way ...

Perhaps there is a firmware setting which is preventing the IPL
interaction from actually occurring??

I've tried typing ahead, and holding down the space bar, but that does not
seem to work, and I can't see any way to tell the OpenBSD loader to wait
for me to type the -c option, and subsequently I don't see the UKC> prompt
at all ...

Hmmm ... any suggestions??  I'm leaving the office for the day, I'll be in
in the AM (EST5EDT) ...

>
>    boot>
>
> prompt.  There you can type "boot bsd.rd -c", which will give you the
>
>    UKC>
>
> prompt.
>
> Cheers,
>
> Mark
--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=
Robert S. Sciuk http://www.controlq.com                259 Simcoe St. S.
Control-Q Research tel: 905.576.8028 Oshawa, Ont.
[hidden email] fax: 905.576.8386   Canada, L1H 4H3

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ...

Mark Kettenis
> Date: Tue, 11 Dec 2007 17:49:28 -0500 (EST)
> From: Rob Sciuk <[hidden email]>
>
> Mark, Sorry, but when I answer Y to interact with the IPL, it then says
>
> Booting ...
> Boot IO dependant code (IODC) revision 0
>
> and when the OpenBSD header appears, it does not give me a chance to enter
> anything, but rather just boots bsd.rd in the normal way ...
>
> Perhaps there is a firmware setting which is preventing the IPL
> interaction from actually occurring??
>
> I've tried typing ahead, and holding down the space bar, but that does not
> seem to work, and I can't see any way to tell the OpenBSD loader to wait
> for me to type the -c option, and subsequently I don't see the UKC> prompt
> at all ...
>
> Hmmm ... any suggestions??  I'm leaving the office for the day, I'll be in
> in the AM (EST5EDT) ...

Hmm, it is very well possible that things got slightly broken in the
recent changes.  I'll have to look into that.

Meanwhile did you get a chance at testing that diff I sent you (see
below)?


Index: mainbus.c
===================================================================
RCS file: /cvs/src/sys/arch/hppa/hppa/mainbus.c,v
retrieving revision 1.67
diff -u -p -r1.67 mainbus.c
--- mainbus.c 2 Oct 2007 00:59:12 -0000 1.67
+++ mainbus.c 12 Dec 2007 12:28:09 -0000
@@ -1080,11 +1080,11 @@ mbattach(parent, self, aux)
  nca.ca_dp.dp_bc[3] = nca.ca_dp.dp_bc[4] = nca.ca_dp.dp_bc[5] = -1;
  nca.ca_dp.dp_mod = -1;
  switch (cpu_hvers) {
-#if 0
  case HPPA_BOARD_HP809:
  case HPPA_BOARD_HP819:
  case HPPA_BOARD_HP839:
  case HPPA_BOARD_HP859:
+#if 0
  case HPPA_BOARD_HP770_J200:
  case HPPA_BOARD_HP770_J210:
  case HPPA_BOARD_HP770_J210XC:

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ...

Rob Sciuk
On Wed, 12 Dec 2007, Mark Kettenis wrote:

> Meanwhile did you get a chance at testing that diff I sent you (see
> below)?
>
Mark,

I'm just downloading sys.tar.gz from the web site onto my 712 to apply
patch and rebuild.  I guess I'll try and build a .lif image, and use bootp
to get the K200 to reboot it .. Stay tuned.

>
> Index: mainbus.c
> ===================================================================
> RCS file: /cvs/src/sys/arch/hppa/hppa/mainbus.c,v
> retrieving revision 1.67
> diff -u -p -r1.67 mainbus.c
> --- mainbus.c 2 Oct 2007 00:59:12 -0000 1.67
> +++ mainbus.c 12 Dec 2007 12:28:09 -0000
> @@ -1080,11 +1080,11 @@ mbattach(parent, self, aux)
> nca.ca_dp.dp_bc[3] = nca.ca_dp.dp_bc[4] = nca.ca_dp.dp_bc[5] = -1;
> nca.ca_dp.dp_mod = -1;
> switch (cpu_hvers) {
> -#if 0
> case HPPA_BOARD_HP809:
> case HPPA_BOARD_HP819:
> case HPPA_BOARD_HP839:
> case HPPA_BOARD_HP859:
> +#if 0
> case HPPA_BOARD_HP770_J200:
> case HPPA_BOARD_HP770_J210:
> case HPPA_BOARD_HP770_J210XC:
>
>

--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=
Robert S. Sciuk http://www.controlq.com                259 Simcoe St. S.
Control-Q Research tel: 905.576.8028 Oshawa, Ont.
[hidden email] fax: 905.576.8386   Canada, L1H 4H3

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ...

Rob Sciuk
In reply to this post by Rob Sciuk
Verbose boot log: (minus annoying ^M's, ^G's and ^H's)

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=


Firmware Version  2.9

Duplex Console IO Dependent Code (IODC) revision 4

------------------------------------------------------------------------------
    (c) Copyright 1990-1998, Hewlett-Packard Company, All rights reserved
------------------------------------------------------------------------------

   Processor   Speed            State           CoProcessor State  Cache Size
   ---------  --------   ---------------------  -----------------  ----------

       0      100  MHz   Active                 Functional          256 KB
       1      100  MHz   Idle                   Functional          256 KB

   Central Bus Speed (in MHz)  :        100
   Available Memory (bytes)    :  536870912
   Good Memory Required (bytes):   19648512


    Primary boot path:    10/0.6   (dec)
    Alternate boot path:  10/12/5.2   (dec)
    Console path:         10/4/0.0   (dec)
    Keyboard path:        10/12/7.0   (dec)


Processor is starting autoboot process.

To discontinue, press any key within 10 seconds.

Boot terminated.


------- Main Menu -------------------------------------------------------------

         Command                         Description
         -------                         -----------

         BOot [PRI|ALT|<path>]           Boot from specified path
         PAth [PRI|ALT] [<path>]         Display or modify a path
         SEArch [DIsplay|IPL] [<path>]   Search for boot devices

         COnfiguration menu              Displays or sets boot values
         INformation menu                Displays hardware information
         SERvice menu                    Displays service commands

         DIsplay                         Redisplay the current menu
         HElp [<menu>|<command>]         Display help for menu or command
         RESET                           Restart the system
-------
Main Menu: Enter command or menu > search

Searching for potential boot device(s)
This may take several minutes.

To discontinue search, press any key (termination may not be immediate).


    Path Number           Device Path (dec)        Device Type
    -----------           -----------------        -----------
    P0                    10/0.6                   Random access media
    P1                    10/0.5                   Random access media
    P2                    10/0.4                   Random access media
    P3                    10/0.3                   Random access media
    P4                    10/4/12.0                LAN Module
    P5                    10/12/5.2                Random access media
    P6                    10/12/5.0                Sequential access media
    P7                    10/12/6.0                LAN Module


Main Menu: Enter command or menu > boot 10/12/6
Interact with IPL (Y or N)?> y

Booting...
Network Station Address 080009-f03aa2

Boot IO Dependent Code (IODC) revision 2


HARD Booted.

>> OpenBSD/hppa BOOT 0.8
|/-\|/-\|boot>  boot -c
booting lf0a:/bsd: /-\|/-\|/-\|/-\|/-2387968\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|
 /-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+512000\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-+2670592\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-
 \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+380928=0x6e6148
SPID bits: 0x0, error = -2
pdc_coproc: 0xc0, 0xc0; model b rev 1
[ bsd ELF symbol table not valid: symtab unaligned ]
[ no symbol table formats found ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
  The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.2-current (RAMDISK) #549: Thu Dec  6 17:04:00 MST 2007
     [hidden email]:/usr/src/sys/arch/hppa/compile/RAMDISK
HP 9000/819/K200 (KittyHawk DC2 100) PA-RISC 1.1a
real mem = 536870912 (524288 reserved for PROM, 8269824 used by OpenBSD)
avail mem = 517582848
User Kernel Config
UKC> verbose
autoconf verbose enabled
UKC> quit
Continuing...
>>> probing for mainbus0
>>> mainbus probe returned 1
mainbus0 at root [flex fff80000]

>>> probing for pdc0
>>> pdc probe returned 1
>>> probing for power0
>>> power probe returned 1
>>> probing for mem*
>>> mem probe returned 0
>>> probing for cpu*
>>> cpu probe returned 0
>>> probing for phantomas0
>>> phantomas probe returned 0
>>> probing for uturn0
>>> uturn probe returned 0
>>> probing for uturn1
>>> uturn probe returned 0
>>> probing for astro*
>>> astro probe returned 0
>>> probing for lasi0
>>> lasi probe returned 0
>>> probing for lasi0
>>> lasi probe returned 0
>>> probing for lasi1
>>> lasi probe returned 0
>>> probing for asp*
>>> asp probe returned 0
>>> probing for wax*
>>> wax probe returned 0
>>> probing for mongoose*
>>> mongoose probe returned 0
>>> probing for sti0
>>> sti probe returned 0
>>> probing for sti1
>>> sti probe returned 0
>>> probing for siop*
>>> siop probe returned 0
>>> pdc probe won
pdc0 at mainbus0

>>> probing for power0
>>> power probe returned 1
>>> probing for mem*
>>> mem probe returned 0
>>> probing for cpu*
>>> cpu probe returned 0
>>> probing for phantomas0
>>> phantomas probe returned 0
>>> probing for uturn0
>>> uturn probe returned 0
>>> probing for uturn1
>>> uturn probe returned 0
>>> probing for astro*
>>> astro probe returned 0
>>> probing for lasi0
>>> lasi probe returned 0
>>> probing for lasi0
>>> lasi probe returned 0
>>> probing for lasi1
>>> lasi probe returned 0
>>> probing for asp*
>>> asp probe returned 0
>>> probing for wax*
>>> wax probe returned 0
>>> probing for mongoose*
>>> mongoose probe returned 0
>>> probing for sti0
>>> sti probe returned 0
>>> probing for sti1
>>> sti probe returned 0
>>> probing for siop*
>>> siop probe returned 0
>>> power probe won
power0 at mainbus0: nobiomask 0x3 netmask 0x3 ttymask 0x13
bootpath: 10/12/6.10000.c97a0040.f45e1a89.9831fe03.c0a8450b.c0a84558 class=4098 flags=0 hpa=0xffd07000 spa=0x0 io=0xc000
rd0: fixed, 5120 blocks
root on rd0a swap on rd0b dump on rd0b
WARNING: clock gained 3 days -- CHECK AND RESET THE DATE!
<<FROZEN HERE>>

Disconnected.

Reply | Threaded
Open this post in threaded view
|

Re: HP 9000 K200 (819) ... Possible hw donation ...

Rob Sciuk
In reply to this post by Mark Kettenis
Gentlemen,

I'm hoping to attend the BSDCan conference this year in Ottawa, and I'm
wondering if anyone from the OpenBSD/HPPA community will be there?

Further, if there is interest, I would donate the K200 I've been using to
the cause, if there is anyone who would like it, and be able to pack it
away with them at the conference, I'd happily drag it up to Ottawa for
someone to work with 'BSD with ... I've got OpenBSD running on it, and
there are 2 9gb hard drives still working on it ... (It is the size of a
dishwasher, and weighs about 200 lbs, comes with terminal and a bunch of
muxes).  I need the room back ...

Any takers??

Cheers,
Rob.


On Sat, 8 Dec 2007, Mark Kettenis wrote:

> Date: Sat, 8 Dec 2007 11:38:01 +0100 (CET)
> From: Mark Kettenis <[hidden email]>
> To: [hidden email]
> Cc: [hidden email], [hidden email]
> Subject: Re: HP 9000 K200 (819) ...
>
>> Date: Sat, 8 Dec 2007 09:43:19 +0100
>> From: Martin Reindl <[hidden email]>
>>
>> Rob Sciuk <[hidden email]> wrote:
>>
>>> Is there anyone here?  I'm attempting an openbsd 4.2 install on a
>>> Kittyhawk, HP9K K200, and I get as far as the time check on the boot CD,
>>> when the kernel just hangs ...
>>>
>>>
>>> WARNING:  Clock gained 18 days -- CHECK AND RESET THE DATE!
>>> <the rest is silence>
>>>
>>>
>>> Any ideas??
>>>
>>
>> K-class PA-RISC machines are not really supported (yet?). At least send
>> the full dmesg you got.
>
> While the machines are indeed currently unsupported, there is not real
> reason why they couldn't run OpenBSD, and I'm really interested in
> making it so.  If you want to help, please send us a complete dmesg.
> It shouldn't be too difficult to capture when if you're using a serial
> console.
>
> Cheers,
>
> Mark
>
>

--
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=
Robert S. Sciuk http://www.controlq.com                259 Simcoe St. S.
Control-Q Research tel: 905.576.8028 Oshawa, Ont.
[hidden email] fax: 905.576.8386   Canada, L1H 4H3