HP 735/125 for donation in Adelaide, Australia

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view

HP 735/125 for donation in Adelaide, Australia

Graham Gower
This unit has been gathering dust for too long now and I figure
someone else may as well have a play with it. Its pretty heavy, maybe
25kg, so I'd prefer local pickup. I'd rather give it to a developer,
but if there is no interest I may change my mind.

No monitor or keyboard etc. It has two 50 pin SCSI drives (2gb, 1gb),
one of which is not well secured. The most recent dmesg I have from it
is below.


[ using 325628 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
       The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2007 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 4.2 (GENERIC) #42: Thu Aug  9 22:28:09 CEST 2007
   [hidden email]:/usr/src/sys/arch/hppa/compile/GENERIC
HP 9000/735/130 (Snake Cheetah) PA-RISC 1.1a
real mem = 184549376 (524288 reserved for PROM, 5885952 used by OpenBSD)
avail mem = 174346240
mainbus0 at root [flex fff80000]
pdc0 at mainbus0
power0 at mainbus0: not available
mem0 at mainbus0 offset ffbf000: size 176MB
cpu0 at mainbus0 offset ffbe000 irq 31: PCXL L1-A 125MHz, FPU PCXT
(Rolex - CMOS-26B) rev 1
cpu0: 256K(32b/l) Icache, 256K(32b/l) wr-back Dcache, 120 coherent TLB, 16
mongoose0 at mainbus0 offset c000000 irq 17: HWPC000 rev 34, 33 MHz
eisa0 at mongoose0
isa at mongoose0 not configured
asp0 at mainbus0 offset 82f000 irq 28: Hardball rev 20, lan 1 scsi 7
gsc0 at asp0: wordleds
harmony0 at gsc0 offset 1000000 irq 13: rev 0
audio0 at harmony0
siop0 at gsc0 offset 830000 irq 3 hpa=f0830000: NCR53C720 rev 2
scsibus0 at siop0: 16 targets
lpt0 at gsc0 offset 824000 irq 7
com1 at gsc0 offset 822000 irq 6: ns16550a, 16 byte fifo
com0 at gsc0 offset 823000 irq 5: ns16550a, 16 byte fifo
com0: console
hil0 at gsc0 offset 821000 irq 1
ie0 at gsc0 offset 826000 irq 8: i82596DX v0.0, address 08:00:09:1b:e8:fd
oosiop0 at gsc0 offset 825000 irq 9: NCR53C700 rev 0, 31MHz, SCSI ID 7
scsibus1 at oosiop0: 8 targets
sd0 at scsibus1 targ 0 lun 0: <SEAGATE, ST32272N, 0876> SCSI2 0/direct fixed
sd0: 2157MB, 6300 cyl, 4 head, 175 sec, 512 bytes/sec, 4419464 sec total
sd1 at scsibus1 targ 1 lun 0: <SEAGATE, ST31200N, 8648> SCSI2 0/direct fixed
sd1: 1006MB, 2700 cyl, 9 head, 84 sec, 512 bytes/sec, 2061108 sec total
sti0 at mainbus0 offset 8000000 irq 11: HPA1659A rev 8.02;10, ID
sti0: 2048x1024 frame buffer, 1280x1024x8 display, offset 768x0
sti0: 10x20 font type 1, 40 bpc, charset 0-255
biomask 0x7 netmask 0xf ttymask 0x3f
bootpath: 2/0/1.0 class=1 flags=c0<autoboot,autosearch> hpa=0xf0825000
spa=0x0 io=0x6abc
hil0: no devices
wsdisplay0 at sti0 mux 1
wsdisplay0: screen 0 added (std, vt100 emulation)
root on sd0a swap on sd0b dump on sd0b