Fwd: umsm: sparc64

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Fwd: umsm: sparc64

Kihaguru Gathura-2
---------- Forwarded message ----------
From: Stuart Henderson <[hidden email]>
Date: Thu, 4 Jul 2019 11:36:22 +0100
Subject: Re: umsm: sparc64
To: Kihaguru Gathura <[hidden email]>
Cc: [hidden email]

On 2019/07/04 12:52, Kihaguru Gathura wrote:
> Hereby attached the new multiprocessor kernel with umsm working ok.
>
> The error message appears for each connection made to cuaU. This might
> potentially populate dmesg logs over time.
>
> Error message:
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <[hidden email]>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0:

Please send your dmesg to [hidden email] :-)


> Kihaguru.
>
> www# dmesg
> console is /pci@83,4000/isa@7/su@0,3f8
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>         The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2019 OpenBSD. All rights reserved.  https://www.OpenBSD.org
>
> OpenBSD 6.5 (WWW.MP) #0: Thu Jul  4 08:43:43 EAT 2019
>     [hidden email]:/usr/src/sys/arch/sparc64/compile/WWW.MP
> real mem = 17179869184 (16384MB)
> avail mem = 16862576640 (16081MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root: Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V
> cpu0 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz
> cpu0: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K
> external (64 b/l)
> cpu1 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz
> cpu1: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K
> external (64 b/l)
> psycho0 at mainbus0 addr 0xfffb2000: SUNW,psycho, impl 0, version 4, ign c0
> psycho0: bus range 0-0, PCI bus 0
> psycho0: dvma map fe000000-ffffffff, STC0 enabled
> pci0 at psycho0
> ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
> "FJSV,scfc" at ebus0 addr 210000-210085, 220000-220031, 260000-260001,
> 270000-28ffff ivec 0x23 not configured
> "FJSV,flashprom" at ebus0 addr 0-3fffff not configured
> clock1 at ebus0 addr 250000-251fff: mk48t59
> "FJSV,panel" at ebus0 addr 210011-210011 ivec 0x25 not configured
> ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
> com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
> com0: console
> com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
> hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0xe1, address
> 00:0b:5d:f3:a7:5c
> nsphyter0 at hme0 phy 1: DP83843 10/100 PHY, rev. 0
> mpi0 at pci0 dev 2 function 1 "Symbios Logic 53c1030" rev 0x07: ivec 0xe0
> mpi0: 0, firmware 1.0.12.0
> scsibus1 at mpi0: 16 targets, initiator 7
> sym0 at scsibus1 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR
> sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR
> sd0: 70007MB, 512 bytes/sector, 143374738 sectors
> sym1 at scsibus1 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL
> sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL
> sd1: 70007MB, 512 bytes/sector, 143374738 sectors
> mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4:
> DMA, channel 0 configured to native-PCI, channel 1 configured to
> native-PCI
> pciide0: using ivec 0xe4 for native-PCI interrupt
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus2 at atapiscsi0: 2 targets
> cd0 at scsibus2 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PY28> ATAPI
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec
> 0xe9, version 1.0, legacy support
> usb0 at ohci0: USB revision 1.0
> uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub"
> rev 1.00/1.00 addr 1
> psycho1 at mainbus0 addr 0xfff9e000: SUNW,psycho, impl 0, version 4, ign c0
> psycho1: bus range 128-128, PCI bus 128
> psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled
> pci1 at psycho1
> bge0 at pci1 dev 1 function 0 "Fujitsu PRIMEPOWER250/450 LAN" rev
> 0x02, BCM5702/5703 A2 (0x1002): ivec 0xc0, address 00:0b:5d:f4:27:5c
> brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
> "counter-timer" at mainbus0 addr 0xfff8bc00 not configured
> umsm0 at uhub0 port 1 configuration 1 interface 0 "HUAWEI HUAWEI
> Mobile" rev 2.00/1.02 addr 2
> ucom0 at umsm0
> umsm1 at uhub0 port 1 configuration 1 interface 1 "HUAWEI HUAWEI
> Mobile" rev 2.00/1.02 addr 2
> ucom1 at umsm1
> umsm2 at uhub0 port 1 configuration 1 interface 2 "HUAWEI HUAWEI
> Mobile" rev 2.00/1.02 addr 2
> ucom2 at umsm2
> umass0 at uhub0 port 1 configuration 1 interface 3 "HUAWEI HUAWEI
> Mobile" rev 2.00/1.02 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus3 at umass0: 2 targets, initiator 0
> cd1 at scsibus3 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2
> 5/cdrom removable
> umass1 at uhub0 port 1 configuration 1 interface 4 "HUAWEI HUAWEI
> Mobile" rev 2.00/1.02 addr 2
> umass1: using SCSI over Bulk-Only
> scsibus4 at umass1: 2 targets, initiator 0
> sd2 at scsibus4 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2
> 0/direct removable
> vscsi0 at root
> scsibus5 at vscsi0: 256 targets
> softraid0 at root
> scsibus6bootpath: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0
> root on sd0a (e489192361503865.a) swap on sd0b dump on sd0b
> umsm0: this device is not using CDC notify message in intr pipe.
> Please send your dmesg to <[hidden email]>, thanks.
> umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> www#
>
>
>
>
> On 7/3/19, Kihaguru Gathura <[hidden email]> wrote:
> >> Try adding umsm to /sys/arch/sparc64/conf/GENERIC and build a new kernel.
> >> If it works ok, report back, maybe we can add it to the standard kernel.
> >
> > Have added umsm to GENERIC and built a new kernel => modem works as
> > desired at cuaU0 -s 115200.
> >
> > Next will build a multiprocessor kernel using GENERIC.MP and continue
> > testing and using the modem.
> >
> > However error messages noted at dmesg (umsm0: this device is not using
> > CDC notify message in intr pipe.)
> >
> > Thank you,
> >
> > Kihaguru.
> >
> > +++++++++++++++++++++++++++++++++++++++++++++++++
> > console is /pci@83,4000/isa@7/su@0,3f8
> > Copyright (c) 1982, 1986, 1989, 1991, 1993
> >         The Regents of the University of California.  All rights reserved.
> > Copyright (c) 1995-2019 OpenBSD. All rights reserved.
> > https://www.OpenBSD.org
> >
> > OpenBSD 6.5 (WWW) #0: Wed Jul  3 13:36:10 EAT 2019
> >     [hidden email]:/usr/src/sys/arch/sparc64/compile/WWW
> > real mem = 17179869184 (16384MB)
> > avail mem = 16862699520 (16081MB)
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root: Fujitsu Siemens PRIMEPOWER250 2x SPARC64 V
> > cpu0 at mainbus0: FJSV,SPARC64-V (rev 5.1) @ 1979 MHz
> > cpu0: physical 128K instruction (64 b/l), 128K data (64 b/l), 3072K
> > external (64 b/l)
> > "FJSV,SPARC64-V" at mainbus0 not configured
> > psycho0 at mainbus0 addr 0xfffb2000: SUNW,psycho, impl 0, version 4, ign c0
> > psycho0: bus range 0-0, PCI bus 0
> > psycho0: dvma map fe000000-ffffffff, STC0 enabled
> > pci0 at psycho0
> > ebus0 at pci0 dev 1 function 0 "Sun PCIO EBus2" rev 0x01
> > "FJSV,scfc" at ebus0 addr 210000-210085, 220000-220031, 260000-260001,
> > 270000-28ffff ivec 0x23 not configured
> > "FJSV,flashprom" at ebus0 addr 0-3fffff not configured
> > clock1 at ebus0 addr 250000-251fff: mk48t59
> > "FJSV,panel" at ebus0 addr 210011-210011 ivec 0x25 not configured
> > ebus1 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0x00
> > com0 at ebus1 addr 3f8-3ff ivec 0x2b: ns16550a, 16 byte fifo
> > com0: console
> > com1 at ebus1 addr 2e8-2ef ivec 0x2b: ns16550a, 16 byte fifo
> > hme0 at pci0 dev 1 function 1 "Sun HME" rev 0x01: ivec 0xe1, address
> > 00:0b:5d:f3:a7:5c
> > nsphyter0 at hme0 phy 1: DP83843 10/100 PHY, rev. 0
> > mpi0 at pci0 dev 2 function 1 "Symbios Logic 53c1030" rev 0x07: ivec 0xe0
> > mpi0: 0, firmware 1.0.12.0
> > scsibus1 at mpi0: 16 targets, initiator 7
> > sym0 at scsibus1 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR
> > sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00RAR_AAN0P5200RAR
> > sd0: 70007MB, 512 bytes/sector, 143374738 sectors
> > sym1 at scsibus1 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL
> > sd1 at scsibus0 targ 1 lun 0: <FUJITSU, MAT3073N SUN72G, 0602> SCSI2
> > 0/direct fixed serial.FUJITSU_MAT3073N_SUN72G_000506B00SSL_AAN0P5200SSL
> > sd1: 70007MB, 512 bytes/sector, 143374738 sectors
> > mpi0: target 0 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> > mpi0: target 1 Sync at 160MHz width 16bit offset 127 QAS 1 DT 1 IU 1
> > pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc4:
> > DMA, channel 0 configured to native-PCI, channel 1 configured to
> > native-PCI
> > pciide0: using ivec 0xe4 for native-PCI interrupt
> > atapiscsi0 at pciide0 channel 0 drive 0
> > scsibus2 at atapiscsi0: 2 targets
> > cd0 at scsibus2 targ 0 lun 0: <MATSHITA, DVD-ROM SR-8178, PY28> ATAPI
> > 5/cdrom removable
> > cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> > pciide0: channel 1 disabled (no drives)
> > ohci0 at pci0 dev 10 function 0 "Acer Labs M5237 USB" rev 0x03: ivec
> > 0xe9, version 1.0, legacy support
> > usb0 at ohci0: USB revision 1.0
> > uhub0 at usb0 configuration 1 interface 0 "Acer Labs OHCI root hub"
> > rev 1.00/1.00 addr 1
> > psycbrgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2
> > timer0 at mainbus0 addr 0xfff8bc00 ivec 0xec, 0xed
> > umsm0 at uhub0 port 1 configuration 1 interface 0 "HUAWEI HUAWEI
> > Mobile" rev 2.00/1.02 addr 2
> > ucom0 at umsm0
> > umsm1 at uhub0 port 1 configuration 1 interface 1 "HUAWEI HUAWEI
> > Mobile" rev 2.00/1.02 addr 2
> > ucom1 at umsm1
> > umsm2 at uhub0 port 1 configuration 1 interface 2 "HUAWEI HUAWEI
> > Mobile" rev 2.00/1.02 addr 2
> > ucom2 at umsm2
> > umass0 at uhub0 port 1 configuration 1 interface 3 "HUAWEI HUAWEI
> > Mobile" rev 2.00/1.02 addr 2
> > umass0: using SCSI over Bulk-Only
> > scsibus3 at umass0: 2 targets, initiator 0
> > cd1 at scsibus3 targ 1 lun 0: <HUAWEI, Mass Storage, 2.31> SCSI2
> > 5/cdrom removable
> > umass1 at uhub0 port 1 configuration 1 interface 4 "HUAWEI HUAWEI
> > Mobile" rev 2.00/1.02 addr 2
> > umass1: using SCSI over Bulk-Only
> > scsibus4 at umass1: 2 targets, initiator 0
> > sd2 at scsibus4 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2
> > 0/direct removable
> > vscsi0 at root
> > scsibus5 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus6 at softraid0: 256 targets
> > bootpath: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0
> > root on sd0a (e489192361503865.a) swap on sd0b dump on sd0b
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > ho1 at mainbus0 addr 0xfff9e000: SUNW,psycho, impl 0, version 4, ign c0
> > psycho1: bus range 128-128, PCI bus 128
> > psycho1: dvma map fe000000-ffffffff, STC0 enabled, STC1 enabled
> > pci1 at psycho1
> > sd2 at scsibus4 targ 1 lun 0: <HUAWEI, SD Storage, 2.31> SCSI2
> > 0/direct removable
> > vscsi0 at root
> > scsibus5 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus6 at softraid0: 256 targets
> > bootpath: /pci@83,4000/FJSV,ulsa@2,1/disk@0,0
> > root on sd0a (e489192361503865.a) swap on sd0b dump on sd0b
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> > umsm0: this device is not using CDC notify message in intr pipe.
> > Please send your dmesg to <[hidden email]>, thanks.
> > umsm0: intr buffer 0xc1 0x1 0x3 0x0 0x0 0x0 0x0
> >