Fan spinning constantly on Lenovo X1C and 6.6

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

Fan spinning constantly on Lenovo X1C and 6.6

Josh-106
hi,

After upgrading from 6.5 to 6.6 following the procedure [1], my Lenovo
X1C 6G is getting hot all the time.
Fan is constantly spinning at 4000+rpm even even if its just editing a
note in zim.
If I let the laptop idling, it will take quite some time for the fan
to stop even if there is no high cpu usage processes (showing top CS
processes).

X session is started via xenodm using cwm only. See below .xsession.
Tried with and without the following configuration file but behaviour
remains the same.
$ cat /etc/X11/xorg.conf.d/intel.conf
Section "Device"
   Identifier "drm"
   Driver "intel"
   Option "TearFree" "true"
EndSection

The only tweaks I added were from this link [2].

apmd is started at boot, with -A flag. One thing I notice is that apm
seems to change more frequently the hw.setperf setting to its max. My
overall usage of the laptop did not change.
Could it be related to some apm / performance adjustment changes
between 6.5 and 6.6?

Any other X1/Lenovo X2* owners facing that issue?

Thank you

[1] https://www.openbsd.org/faq/upgrade66.html
[2] https://www.c0ffee.net/blog/openbsd-on-a-laptop/

$ cat .xsession
source $HOME/.profile
xsetroot -solid dimgray
xidle &
xset dpms 180 240 300
xset s off
exec cwm

$ cat /etc/sysctl.conf
hw.allowpowerdown=1             # 0=Disable power button shutdown
machdep.allowaperture=2         # See xf86(4)
machdep.lidaction=1             # 1=suspend, 2=hibernate laptop upon lid closing
machdep.pwraction=2             # ACPI power button action: 0=none, 2=suspend
kern.audio.record=0
kern.shminfo.shmall=3145728
kern.shminfo.shmmax=2147483647
kern.shminfo.shmmni=1024
kern.shminfo.shmseg=1024
kern.seminfo.semmns=4096
kern.seminfo.semmni=1024
kern.maxproc=32768
kern.maxfiles=65535
kern.bufcachepercent=50
kern.maxvnodes=262144
kern.somaxconn=2048

$ dmesg
OpenBSD 6.6 (GENERIC.MP) #372: Sat Oct 12 10:56:27 MDT 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16896438272 (16113MB)
avail mem = 16371642368 (15613MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x9f049000 (63 entries)
bios0: vendor LENOVO version "N23ET66W (1.41 )" date 09/02/2019
bios0: LENOVO 20KHCTO1WW
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT UEFI SSDT SSDT HPET APIC MCFG ECDT SSDT
SSDT BOOT BATB SSDT SSDT SSDT LPIT WSMT SSDT SSDT SSDT DBGP DBG2 MSDM
DMAR NHLT ASF! FPDT UEFI
acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4)
PXSX(S4) RP02(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4)
PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 1796.56 MHz, 06-8e-0a
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MO
VBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,S
SBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 1795.82 MHz, 06-8e-0a
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MO
VBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,S
SBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 1795.82 MHz, 06-8e-0a
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MO
VBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,S
SBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 1795.83 MHz, 06-8e-0a
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MO
VBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,S
SBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf0000000, bus 0-127
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 4 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus 5 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus -1 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHC_
acpitz0 at acpi0: critical temperature is 128 degC
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "01AV430" serial  2745 type LiP oem "SMP"
"LEN0100" at acpi0 not configured
"INT3403" at acpi0 not configured
acpicmos0 at acpi0
"ALPS0000" at acpi0 not configured
"INT0E0C" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT3400" at acpi0 not configured
"USBC000" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout at acpivideo0 not configured
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1796 MHz: speeds: 2101, 2100, 1900, 1800,
1700, 1600, 1500, 1400, 1200, 1100, 1000, 800, 700, 600, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x08
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 620" rev 0x07
drm0 at inteldrm0
inteldrm0: msi
"Intel Core 6G Thermal" rev 0x08 at pci0 dev 4 function 0 not configured
"Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 2
iwm0 at pci1 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x78, msi
ppb1 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 4
nvme0 at pci2 dev 0 function 0 "SanDisk WD Black NVMe" rev 0x00: msix, NVMe 1.3
nvme0: WDC PC SN720 SDAQNTW-512G-1001, firmware 10170101, serial 1848118022278
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, WDC PC SN720 SDA, 1017>
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors
ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 5
pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
apic 2 int 16
iic0 at ichiic0
em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address
e8:6a:3a:ea:ee:11
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.16, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/24.07 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/24.07 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub0 port 1 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/24.07 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT Inc
Integrated Camera" rev 2.01/17.11 addr 4
video0 at uvideo0
umass0 at uhub0 port 15 configuration 1 interface 0 "Generic
USB3.0-CRW" rev 3.00/29.08 addr 5
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC CRW, 1.00> removable
serial.0bda0328008282014000
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd2: 488385MB, 512 bytes/sector, 1000213601 sectors
root on sd2a (2a9a4953b9283bc0.a) swap on sd2b dump on sd2b
inteldrm0: 2560x1440, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x230, fw ver 22.361476.0, address 04:ea:aa:ee:00:7f
[drm] *ERROR* Potential atomic update failure on pipe B

$ cat /var/log/Xorg.0.log
[    42.753] (--) checkDevMem: using aperture driver /dev/xf86
[    42.831] (--) Using wscons driver on /dev/ttyC4
[    42.850]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[    42.850] Build Operating System: OpenBSD 6.6 amd64
[    42.850] Current Operating System: OpenBSD x1.local 6.6 GENERIC.MP#372 amd64
[    42.850] Build Date: 12 October 2019  11:22:22AM
[    42.850]
[    42.850] Current version of pixman: 0.38.4
[    42.850]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    42.850] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    42.850] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 21
20:51:09 2019
[    42.852] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    42.852] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[    42.854] (==) No Layout section.  Using the first Screen section.
[    42.854] (==) No screen section available. Using defaults.
[    42.854] (**) |-->Screen "Default Screen Section" (0)
[    42.854] (**) |   |-->Monitor "<default monitor>"
[    42.855] (==) No device specified for screen "Default Screen Section".
        Using the first device section listed.
[    42.855] (**) |   |-->Device "drm"
[    42.855] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    42.855] (==) Automatically adding devices
[    42.855] (==) Automatically enabling devices
[    42.855] (==) Not automatically adding GPU devices
[    42.855] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    42.860] (==) FontPath set to:
        /usr/X11R6/lib/X11/fonts/misc/,
        /usr/X11R6/lib/X11/fonts/TTF/,
        /usr/X11R6/lib/X11/fonts/OTF/,
        /usr/X11R6/lib/X11/fonts/Type1/,
        /usr/X11R6/lib/X11/fonts/100dpi/,
        /usr/X11R6/lib/X11/fonts/75dpi/
[    42.860] (==) ModulePath set to "/usr/X11R6/lib/modules"
[    42.860] (II) The server relies on wscons to provide the list of
input devices.
        If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[    42.860] (II) Loader magic: 0x214184a3000
[    42.860] (II) Module ABI versions:
[    42.860]    X.Org ANSI C Emulation: 0.4
[    42.860]    X.Org Video Driver: 24.0
[    42.860]    X.Org XInput driver : 24.1
[    42.860]    X.Org Server Extension : 10.0
[    42.861] (--) PCI:*(0@0:2:0) 8086:5917:17aa:225c rev 7, Mem @
0x2ffe000000/16777216, 0xc0000000/536870912, I/O @ 0x0000e000/64
[    42.861] (II) LoadModule: "glx"
[    42.862] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[    42.872] (II) Module glx: vendor="X.Org Foundation"
[    42.872]    compiled for 1.20.5, module version = 1.0.0
[    42.872]    ABI class: X.Org Server Extension, version 10.0
[    42.872] (II) LoadModule: "intel"
[    42.872] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[    42.875] (II) Module intel: vendor="X.Org Foundation"
[    42.875]    compiled for 1.20.5, module version = 2.99.916
[    42.875]    Module class: X.Org Video Driver
[    42.875]    ABI class: X.Org Video Driver, version 24.0
[    42.875] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
        [    42.875] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
        [    42.875] (II) intel: Driver for Intel(R) Iris(TM)
Graphics: 5100, 6100
        [    42.875] (II) intel: Driver for Intel(R) Iris(TM) Pro
Graphics: 5200, 6200, P6300
        [    42.918] (II) intel(0): Using Kernel Mode Setting driver:
i915, version 1.6.0 20180719
        [    42.920] (WW) intel(0): Unknown chipset
        [    42.920] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3,
sse4.1, sse4.2, avx, avx2
        [    42.920] (II) intel(0): Creating default Display
subsection in Screen section
                "Default Screen Section" for depth/fbbpp 24/32
        [    42.920] (==) intel(0): Depth 24, (--) framebuffer bpp 32
        [    42.920] (==) intel(0): RGB weight 888
        [    42.920] (==) intel(0): Default visual is TrueColor
        [    42.920] (**) intel(0): Option "TearFree" "true"
        [    42.921] (II) intel(0): Output eDP1 has no monitor section
        [    42.921] (--) intel(0): Found backlight control interface
wscons (type 'platform') for output eDP1
        [    42.921] (II) intel(0): Enabled output eDP1
        [    42.921] (II) intel(0): Output DP1 has no monitor section
        [    42.921] (II) intel(0): Enabled output DP1
        [    42.921] (II) intel(0): Output HDMI1 has no monitor section
        [    42.921] (II) intel(0): Enabled output HDMI1
        [    42.921] (II) intel(0): Output DP2 has no monitor section
        [    42.921] (II) intel(0): Enabled output DP2
        [    42.921] (II) intel(0): Output HDMI2 has no monitor section
        [    42.921] (II) intel(0): Enabled output HDMI2
        [    42.921] (--) intel(0): Using a maximum size of 256x256
for hardware cursors
        [    42.921] (II) intel(0): Output VIRTUAL1 has no monitor section
        [    42.921] (II) intel(0): Enabled output VIRTUAL1
        [    42.921] (--) intel(0): Output eDP1 using initial mode
2560x1440 on pipe 0
        [    42.921] (--) intel(0): Output HDMI1 using initial mode
1920x1200 on pipe 1
        [    42.921] (**) intel(0): TearFree enabled
        [    42.921] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
        [    42.921] (==) intel(0): DPI set to (96, 96)
        [    42.922] (II) Loading sub module "dri3"
        [    42.922] (II) LoadModule: "dri3"
        [    42.922] (II) Module "dri3" already built-in
        [    42.922] (II) Loading sub module "dri2"
        [    42.922] (II) LoadModule: "dri2"
        [    42.922] (II) Module "dri2" already built-in
        [    42.922] (II) Loading sub module "present"
        [    42.922] (II) LoadModule: "present"
        [    42.922] (II) Module "present" already built-in
        [    42.923] (II) intel(0): SNA initialized with generic backend
        [    42.923] (==) intel(0): Backing store enabled
        [    42.923] (==) intel(0): Silken mouse enabled
        [    42.924] (II) intel(0): HW Cursor enabled
        [    42.926] (==) intel(0): DPMS enabled
        [    42.927] (II) intel(0): Textured video not supported on
this hardware
        [    42.927] (II) intel(0): [DRI2] Setup complete
        [    42.927] (II) intel(0): [DRI2]   DRI driver: i965
        [    42.927] (II) intel(0): [DRI2]   VDPAU driver: i965
        [    42.927] (II) intel(0): direct rendering: DRI2 DRI3 enabled
        [    42.927] (II) intel(0): hardware support for Present enabled
        [    42.927] (II) Initializing extension Generic Event Extension
        [    42.928] (II) Initializing extension SHAPE
        [    42.929] (II) Initializing extension MIT-SHM
        [    42.929] (II) Initializing extension XInputExtension
        [    42.930] (II) Initializing extension XTEST
        [    42.930] (II) Initializing extension BIG-REQUESTS
        [    42.931] (II) Initializing extension SYNC
        [    42.931] (II) Initializing extension XKEYBOARD
        [    42.932] (II) Initializing extension XC-MISC
        [    42.932] (II) Initializing extension SECURITY
        [    42.933] (II) Initializing extension XFIXES
        [    42.933] (II) Initializing extension RENDER
        [    42.934] (II) Initializing extension RANDR
        [    42.935] (II) Initializing extension COMPOSITE
        [    42.936] (II) Initializing extension DAMAGE
        [    42.936] (II) Initializing extension MIT-SCREEN-SAVER
        [    42.937] (II) Initializing extension DOUBLE-BUFFER
        [    42.937] (II) Initializing extension RECORD
        [    42.938] (II) Initializing extension DPMS
        [    42.938] (II) Initializing extension Present
        [    42.939] (II) Initializing extension DRI3
        [    42.940] (II) Initializing extension X-Resource
        [    42.940] (II) Initializing extension XVideo
        [    42.940] (II) Initializing extension XVideo-MotionCompensation
        [    42.940] (II) Initializing extension GLX
        [    42.970] (II) AIGLX: Loaded and initialized i965
        [    42.970] (II) GLX: Initialized DRI2 GL provider for screen 0
        [    42.970] (II) Initializing extension XFree86-VidModeExtension
        [    42.971] (II) Initializing extension XFree86-DGA
        [    42.971] (II) Initializing extension XFree86-DRI
        [    42.972] (II) Initializing extension DRI2
        [    42.977] (II) intel(0): switch to mode 2560x1440@60.0 on
eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
        [    42.996] (II) intel(0): switch to mode 1920x1200@60.0 on
HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
        [    43.018] (II) intel(0): Setting screen physical size to 677 x 381
        [    43.125] (II) config/wscons: checking input device /dev/wskbd
        [    43.125] (II) wskbd: using layout us
        [    43.125] (II) LoadModule: "kbd"
        [    43.126] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
        [    43.127] (II) Module kbd: vendor="X.Org Foundation"
        [    43.127]    compiled for 1.20.5, module version = 1.9.0
        [    43.127]    Module class: X.Org XInput Driver
        [    43.127]    ABI class: X.Org XInput driver, version 24.1
        [    43.127] (II) Using input driver 'kbd' for '/dev/wskbd'
        [    43.127] (**) /dev/wskbd: always reports core events
        [    43.127] (**) /dev/wskbd: always reports core events
        [    43.127] (**) Option "Protocol" "standard"
        [    43.128] (**) Option "XkbRules" "base"
        [    43.128] (**) Option "XkbModel" "pc105"
        [    43.128] (**) Option "XkbLayout" "us"
        [    43.128] (II) XINPUT: Adding extended input device
"/dev/wskbd" (type: KEYBOARD, id 6)
        [    43.568] (II) config/wscons: checking input device /dev/wsmouse0
        [    43.568] (II) LoadModule: "ws"
        [    43.569] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
        [    43.569] (II) Module ws: vendor="X.Org Foundation"
        [    43.569]    compiled for 1.20.5, module version = 1.3.0
        [    43.569]    Module class: X.Org XInput Driver
        [    43.569]    ABI class: X.Org XInput driver, version 24.1
        [    43.569] (II) Using input driver 'ws' for '/dev/wsmouse0'
        [    43.569] (**) /dev/wsmouse0: always reports core events
        [    43.570] (II) ws: /dev/wsmouse0: debuglevel 0
        [    43.570] (**) Option "Device" "/dev/wsmouse0"
        [    43.570] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
        [    43.570] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
        [    43.570] (**) ws: /dev/wsmouse0: associated screen: 0
        [    44.007] (II) ws: /dev/wsmouse0: minimum x position: 0
        [    44.007] (II) ws: /dev/wsmouse0: maximum x position: 2559
        [    44.007] (II) ws: /dev/wsmouse0: minimum y position: 0
        [    44.007] (II) ws: /dev/wsmouse0: maximum y position: 1439
        [    44.007] (==) ws: /dev/wsmouse0: Buttons: 7
        [    44.011] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
        [    44.011] (II) XINPUT: Adding extended input device
"/dev/wsmouse0" (type: MOUSE, id 7)
        [    44.448] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
        [    44.448] (**) /dev/wsmouse0: (accel) acceleration profile 0
        [    44.448] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
        [    44.448] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
        [    44.451] (II) config/wscons: checking input device /dev/wsmouse
        [    44.451] (II) Using input driver 'ws' for '/dev/wsmouse'
        [    44.451] (**) /dev/wsmouse: always reports core events
        [    44.451] (II) ws: /dev/wsmouse: debuglevel 0
        [    44.451] (**) Option "Device" "/dev/wsmouse"
        [    44.451] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
        [    44.451] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
        [    44.451] (**) ws: /dev/wsmouse: associated screen: 0
        [    44.451] (II) ws: /dev/wsmouse: minimum x position: 0
        [    44.451] (II) ws: /dev/wsmouse: maximum x position: 2559
        [    44.451] (II) ws: /dev/wsmouse: minimum y position: 0
        [    44.451] (II) ws: /dev/wsmouse: maximum y position: 1439
        [    44.451] (==) ws: /dev/wsmouse: Buttons: 7
        [    44.452] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
        [    44.452] (II) XINPUT: Adding extended input device
"/dev/wsmouse" (type: MOUSE, id 8)
        [    44.453] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
        [    44.453] (**) /dev/wsmouse: (accel) acceleration profile 0
        [    44.453] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
        [    44.453] (**) /dev/wsmouse: (accel) acceleration threshold: 4
        [    80.770] (II) intel(0): resizing framebuffer to 5120x1440
        [    80.817] (II) intel(0): switch to mode 2560x1440@60.0 on
HDMI1 using pipe 1, position (2560, 0), rotation normal, reflection
none

Reply | Threaded
Open this post in threaded view
|

Re: Fan spinning constantly on Lenovo X1C and 6.6

Alessandro Gallo
Hi,

Same here on my X220. As soon as I start a Firefox session in X, the fan
starts to spin constantly
at around 3000rpm making a very loud noise. Once the fan reaches 3000rpm
it never goes down
again. I've never had this problem with previous versions of OpenBSD
(thinking of reverting to 6.5).

dmesg:

OpenBSD 6.6 (GENERIC.MP) #372: Sat Oct 12 10:56:27 MDT 2019
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8451125248 (8059MB)
avail mem = 8182292480 (7803MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (65 entries)
bios0: vendor LENOVO version "8DET73WW (1.43 )" date 10/12/2016
bios0: LENOVO 4290LT8
acpi0 at bios0: ACPI 4.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF!
TCPA SSDT SSDT DMAR UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4)
EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 797.54 MHz, 06-2a-07
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 797.42 MHz, 06-2a-07
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 797.42 MHz, 06-2a-07
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 797.42 MHz, 06-2a-07
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus -1 (EXP7)
acpicpu0 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1
halt), PSS
acpicpu1 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1
halt), PSS
acpicpu2 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1
halt), PSS
acpicpu3 at acpi0: C3(200@109 io@0x416), C2(500@80 io@0x414), C1(1000@1
halt), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
tpm0 at acpi0: TPM_ addr 0xfed40000/0x5000, device 0x0000104a rev 0x4e
acpibat0 at acpi0: BAT0 model "42T4940" serial 23063 type LION oem "SANYO"
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 797 MHz: speeds: 2501, 2500, 2200, 2000, 1800,
1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
f0:de:f1:df:ff:7e
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34:
msi, MIMO 2T2R, MoW, address 6c:88:14:0b:80:e0
ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 13
sdhc0 at pci4 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 850, EMT0>
naa.5002538d4274f0aa
sd0: 238475MB, 512 bytes/sector, 488397168 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic
2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.0, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
ugen0 at uhub2 port 3 "UPEK Biometric Coprocessor" rev 1.01/0.02 addr 3
ugen1 at uhub2 port 4 "Broadcom Corp Broadcom Bluetooth Device" rev
2.00/7.48 addr 4
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Ricoh Company Ltd.
Integrated Camera" rev 2.00/80.29 addr 5
video0 at uvideo0
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (e7ac42577fa8a793.a) swap on sd0b dump on sd0b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)

sysctl -a:

kern.ostype=OpenBSD
kern.osrelease=6.6
kern.osrevision=201911
kern.version=OpenBSD 6.6 (GENERIC.MP) #372: Sat Oct 12 10:56:27 MDT 2019
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP

kern.maxvnodes=117856
kern.maxproc=1310
kern.maxfiles=7030
kern.argmax=262144
kern.securelevel=1
kern.hostname=neptune.lan
kern.hostid=0
kern.clockrate=tick = 10000, tickadj = 40, hz = 100, profhz = 100,
stathz = 100
kern.posix1version=200809
kern.ngroups=16
kern.job_control=1
kern.saved_ids=1
kern.boottime=Sun Oct 27 10:28:36 2019
kern.domainname=
kern.maxpartitions=16
kern.rawpartition=2
kern.maxthread=1950
kern.nthreads=153
kern.osversion=GENERIC.MP#372
kern.somaxconn=128
kern.sominconn=80
kern.nosuidcoredump=1
kern.fsync=1
kern.sysvmsg=1
kern.sysvsem=1
kern.sysvshm=1
kern.msgbufsize=98256
kern.malloc.buckets=16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536,131072,262144,524288
kern.malloc.bucket.16=(calls = 63988 total_allocated = 2304 total_free =
180 elements = 256 high watermark = 1280 could_free = 0)
kern.malloc.bucket.32=(calls = 16926 total_allocated = 2560 total_free =
133 elements = 128 high watermark = 640 could_free = 131)
kern.malloc.bucket.64=(calls = 33614 total_allocated = 2560 total_free =
82 elements = 64 high watermark = 320 could_free = 106)
kern.malloc.bucket.128=(calls = 177033 total_allocated = 6496 total_free
= 184 elements = 32 high watermark = 160 could_free = 3352)
kern.malloc.bucket.256=(calls = 13489 total_allocated = 496 total_free =
126 elements = 16 high watermark = 80 could_free = 20)
kern.malloc.bucket.512=(calls = 2326 total_allocated = 216 total_free =
7 elements = 8 high watermark = 40 could_free = 0)
kern.malloc.bucket.1024=(calls = 17535 total_allocated = 5228 total_free
= 6 elements = 4 high watermark = 20 could_free = 323)
kern.malloc.bucket.2048=(calls = 709 total_allocated = 80 total_free = 6
elements = 2 high watermark = 10 could_free = 0)
kern.malloc.bucket.4096=(calls = 2720 total_allocated = 64 total_free =
2 elements = 1 high watermark = 5 could_free = 0)
kern.malloc.bucket.8192=(calls = 818 total_allocated = 56 total_free = 2
elements = 1 high watermark = 5 could_free = 85)
kern.malloc.bucket.16384=(calls = 2084 total_allocated = 8 total_free =
0 elements = 1 high watermark = 5 could_free = 0)
kern.malloc.bucket.32768=(calls = 67 total_allocated = 11 total_free = 0
elements = 1 high watermark = 5 could_free = 0)
kern.malloc.bucket.65536=(calls = 2286 total_allocated = 2 total_free =
0 elements = 1 high watermark = 5 could_free = 0)
kern.malloc.bucket.131072=(calls = 0 total_allocated = 0 total_free = 0
elements = 1 high watermark = 5 could_free = 0)
kern.malloc.bucket.262144=(calls = 1 total_allocated = 1 total_free = 0
elements = 1 high watermark = 5 could_free = 0)
kern.malloc.bucket.524288=(calls = 11 total_allocated = 10 total_free =
0 elements = 1 high watermark = 5 could_free = 0)
kern.malloc.kmemnames=free,,devbuf,,pcb,rtable,,,,ifaddr,soopts,sysctl,counters,,ioctlops,,,,,iov,mount,,NFS_req,NFS_mount,,vnodes,namecache,UFS_quota,UFS_mount,shm,VM_map,sem,dirhash,ACPI,VM_pmap,,,,file,file_desc,sigio,proc,subproc,VFS_cluster,,,MFS_node,,,Export_Host,NFS_srvsock,,NFS_daemon,ip_moptions,in_multi,ether_multi,mrt,ISOFS_mount,ISOFS_node,MSDOSFS_mount,MSDOSFS_fat,MSDOSFS_node,ttys,exec,miscfs_mount,fusefs_mount,,,,,,,,,pfkey_data,tdb,xform_data,,pagedep,inodedep,newblk,,,indirdep,,,,,,,,,VM_swap,,,,,,UVM_amap,UVM_aobj,,USB,USB_device,USB_HC,witness,memdesc,,,crypto_data,,IPsec_creds,,,,emuldata,,,,,,,,,ip6_options,NDP,,,temp,NTFS_mount,NTFS_node,NTFS_fnode,NTFS_dir,NTFS_hash,NTFS_attr,NTFS_data,NTFS_decomp,NTFS_vrun,kqueue,,SYN_cache,UDF_mount,UDF_file_entry,UDF_file_id,,AGP_Memory,DRM
kern.malloc.kmemstat.free=(inuse = 0, calls = 0, memuse = 0K, limblocks
= 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0, sizes = (none))
kern.malloc.kmemstat.devbuf=(inuse = 5963, calls = 7746, memuse =
10804K, limblocks = 0, mapblocks = 0, maxused = 11229K, limit = 78644K,
spare = 0, sizes =
(16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536,262144,524288))
kern.malloc.kmemstat.pcb=(inuse = 14, calls = 14, memuse = 9K, limblocks
= 0, mapblocks = 0, maxused = 9K, limit = 78644K, spare = 0, sizes =
(16,32,1024))
kern.malloc.kmemstat.rtable=(inuse = 68, calls = 345, memuse = 4K,
limblocks = 0, mapblocks = 0, maxused = 4K, limit = 78644K, spare = 0,
sizes = (16,32,64,128,256))
kern.malloc.kmemstat.ifaddr=(inuse = 135, calls = 136, memuse = 16K,
limblocks = 0, mapblocks = 0, maxused = 16K, limit = 78644K, spare = 0,
sizes = (32,64,128,256,4096))
kern.malloc.kmemstat.soopts=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.sysctl=(inuse = 3, calls = 3, memuse = 2K,
limblocks = 0, mapblocks = 0, maxused = 2K, limit = 78644K, spare = 0,
sizes = (32,128,1024))
kern.malloc.kmemstat.counters=(inuse = 79, calls = 79, memuse = 67K,
limblocks = 0, mapblocks = 0, maxused = 67K, limit = 78644K, spare = 0,
sizes = (64,128,256,512,1024,4096,8192))
kern.malloc.kmemstat.ioctlops=(inuse = 0, calls = 1495, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 4K, limit = 78644K, spare = 0,
sizes = (256,512,1024,2048,4096))
kern.malloc.kmemstat.iov=(inuse = 0, calls = 1523, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 8K, limit = 78644K, spare = 0,
sizes = (256,512,1024,2048,4096,8192))
kern.malloc.kmemstat.mount=(inuse = 9, calls = 9, memuse = 9K, limblocks
= 0, mapblocks = 0, maxused = 9K, limit = 78644K, spare = 0, sizes = (1024))
kern.malloc.kmemstat.NFS_req=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.NFS_mount=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.vnodes=(inuse = 1189, calls = 1237, memuse = 76K,
limblocks = 0, mapblocks = 0, maxused = 76K, limit = 78644K, spare = 0,
sizes = (64,128,256))
kern.malloc.kmemstat.namecache=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.UFS_quota=(inuse = 1, calls = 1, memuse = 32K,
limblocks = 0, mapblocks = 0, maxused = 32K, limit = 78644K, spare = 0,
sizes = (32768))
kern.malloc.kmemstat.UFS_mount=(inuse = 37, calls = 37, memuse = 78K,
limblocks = 0, mapblocks = 0, maxused = 78K, limit = 78644K, spare = 0,
sizes = (16,32,128,256,512,2048,4096,32768))
kern.malloc.kmemstat.shm=(inuse = 4, calls = 5, memuse = 10K, limblocks
= 0, mapblocks = 0, maxused = 14K, limit = 78644K, spare = 0, sizes =
(256,1024,4096))
kern.malloc.kmemstat.VM_map=(inuse = 2, calls = 2, memuse = 1K,
limblocks = 0, mapblocks = 0, maxused = 1K, limit = 78644K, spare = 0,
sizes = (256))
kern.malloc.kmemstat.sem=(inuse = 2, calls = 2, memuse = 1K, limblocks =
0, mapblocks = 0, maxused = 1K, limit = 78644K, spare = 0, sizes = (32,128))
kern.malloc.kmemstat.dirhash=(inuse = 276, calls = 384, memuse = 53K,
limblocks = 0, mapblocks = 0, maxused = 53K, limit = 78644K, spare = 0,
sizes = (16,32,64,128,256,512))
kern.malloc.kmemstat.ACPI=(inuse = 6198, calls = 58534, memuse = 718K,
limblocks = 0, mapblocks = 0, maxused = 734K, limit = 78644K, spare = 0,
sizes = (16,32,64,128,256,512,1024,2048,4096))
kern.malloc.kmemstat.VM_pmap=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.file=(inuse = 0, calls = 0, memuse = 0K, limblocks
= 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0, sizes = (none))
kern.malloc.kmemstat.file_desc=(inuse = 3, calls = 22, memuse = 2K,
limblocks = 0, mapblocks = 0, maxused = 8K, limit = 78644K, spare = 0,
sizes = (512,1024,2048))
kern.malloc.kmemstat.sigio=(inuse = 0, calls = 0, memuse = 0K, limblocks
= 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0, sizes = (none))
kern.malloc.kmemstat.proc=(inuse = 210, calls = 1371, memuse = 117K,
limblocks = 0, mapblocks = 0, maxused = 126K, limit = 78644K, spare = 0,
sizes = (16,32,64,1024,4096,8192))
kern.malloc.kmemstat.subproc=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.VFS_cluster=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.MFS_node=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.Export_Host=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.NFS_srvsock=(inuse = 1, calls = 1, memuse = 1K,
limblocks = 0, mapblocks = 0, maxused = 1K, limit = 78644K, spare = 0,
sizes = (128))
kern.malloc.kmemstat.NFS_daemon=(inuse = 1, calls = 1, memuse = 16K,
limblocks = 0, mapblocks = 0, maxused = 16K, limit = 78644K, spare = 0,
sizes = (16384))
kern.malloc.kmemstat.ip_moptions=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.in_multi=(inuse = 11, calls = 11, memuse = 1K,
limblocks = 0, mapblocks = 0, maxused = 1K, limit = 78644K, spare = 0,
sizes = (32,64,128))
kern.malloc.kmemstat.ether_multi=(inuse = 1, calls = 1, memuse = 1K,
limblocks = 0, mapblocks = 0, maxused = 1K, limit = 78644K, spare = 0,
sizes = (32))
kern.malloc.kmemstat.mrt=(inuse = 0, calls = 0, memuse = 0K, limblocks =
0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0, sizes = (none))
kern.malloc.kmemstat.ISOFS_mount=(inuse = 1, calls = 1, memuse = 32K,
limblocks = 0, mapblocks = 0, maxused = 32K, limit = 78644K, spare = 0,
sizes = (32768))
kern.malloc.kmemstat.ISOFS_node=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.MSDOSFS_mount=(inuse = 1, calls = 1, memuse = 16K,
limblocks = 0, mapblocks = 0, maxused = 16K, limit = 78644K, spare = 0,
sizes = (16384))
kern.malloc.kmemstat.MSDOSFS_fat=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.MSDOSFS_node=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.ttys=(inuse = 54, calls = 54, memuse = 161K,
limblocks = 0, mapblocks = 0, maxused = 161K, limit = 78644K, spare = 0,
sizes = (512,1024,4096,8192))
kern.malloc.kmemstat.exec=(inuse = 0, calls = 990, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 2K, limit = 78644K, spare = 0,
sizes = (16,32,256,1024))
kern.malloc.kmemstat.miscfs_mount=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.fusefs_mount=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.pfkey_data=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.tdb=(inuse = 0, calls = 0, memuse = 0K, limblocks =
0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0, sizes = (none))
kern.malloc.kmemstat.xform_data=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.pagedep=(inuse = 1, calls = 1, memuse = 8K,
limblocks = 0, mapblocks = 0, maxused = 8K, limit = 78644K, spare = 0,
sizes = (8192))
kern.malloc.kmemstat.inodedep=(inuse = 1, calls = 1, memuse = 32K,
limblocks = 0, mapblocks = 0, maxused = 32K, limit = 78644K, spare = 0,
sizes = (32768))
kern.malloc.kmemstat.newblk=(inuse = 1, calls = 1, memuse = 1K,
limblocks = 0, mapblocks = 0, maxused = 1K, limit = 78644K, spare = 0,
sizes = (512))
kern.malloc.kmemstat.indirdep=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.VM_swap=(inuse = 7, calls = 7, memuse = 591K,
limblocks = 0, mapblocks = 0, maxused = 591K, limit = 78644K, spare = 0,
sizes = (16,64,2048,524288))
kern.malloc.kmemstat.UVM_amap=(inuse = 3876, calls = 41618, memuse =
198K, limblocks = 0, mapblocks = 0, maxused = 254K, limit = 78644K,
spare = 0, sizes = (16,32,64,128,256,512,1024,8192))
kern.malloc.kmemstat.UVM_aobj=(inuse = 46, calls = 408, memuse = 7K,
limblocks = 0, mapblocks = 0, maxused = 9K, limit = 78644K, spare = 0,
sizes = (16,32,64,128,256,512,1024,2048))
kern.malloc.kmemstat.USB=(inuse = 90, calls = 113, memuse = 29K,
limblocks = 0, mapblocks = 0, maxused = 29K, limit = 78644K, spare = 0,
sizes = (16,32,64,128,256,1024,2048,8192))
kern.malloc.kmemstat.USB_device=(inuse = 16, calls = 16, memuse = 2K,
limblocks = 0, mapblocks = 0, maxused = 2K, limit = 78644K, spare = 0,
sizes = (16,32,128,256,512))
kern.malloc.kmemstat.USB_HC=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.witness=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.memdesc=(inuse = 1, calls = 1, memuse = 4K,
limblocks = 0, mapblocks = 0, maxused = 4K, limit = 78644K, spare = 0,
sizes = (4096))
kern.malloc.kmemstat.crypto_data=(inuse = 1, calls = 1, memuse = 1K,
limblocks = 0, mapblocks = 0, maxused = 1K, limit = 78644K, spare = 0,
sizes = (1024))
kern.malloc.kmemstat.IPsec_creds=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.emuldata=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.ip6_options=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.NDP=(inuse = 5, calls = 5, memuse = 1K, limblocks =
0, mapblocks = 0, maxused = 1K, limit = 78644K, spare = 0, sizes = (32))
kern.malloc.kmemstat.temp=(inuse = 80, calls = 150204, memuse = 3568K,
limblocks = 0, mapblocks = 0, maxused = 3636K, limit = 78644K, spare =
0, sizes =
(16,32,64,128,256,512,1024,2048,4096,8192,16384,32768,65536,524288))
kern.malloc.kmemstat.NTFS_mount=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.NTFS_node=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.NTFS_fnode=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.NTFS_dir=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.NTFS_hash=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.NTFS_attr=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.NTFS_data=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.NTFS_decomp=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.NTFS_vrun=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.kqueue=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.SYN_cache=(inuse = 2, calls = 2, memuse = 16K,
limblocks = 0, mapblocks = 0, maxused = 16K, limit = 78644K, spare = 0,
sizes = (8192))
kern.malloc.kmemstat.UDF_mount=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.UDF_file_entry=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.UDF_file_id=(inuse = 0, calls = 0, memuse = 0K,
limblocks = 0, mapblocks = 0, maxused = 0K, limit = 78644K, spare = 0,
sizes = (none))
kern.malloc.kmemstat.AGP_Memory=(inuse = 1, calls = 1, memuse = 1K,
limblocks = 0, mapblocks = 0, maxused = 1K, limit = 78644K, spare = 0,
sizes = (32))
kern.malloc.kmemstat.DRM=(inuse = 987, calls = 67277, memuse = 280K,
limblocks = 0, mapblocks = 0, maxused = 335K, limit = 78644K, spare = 0,
sizes = (16,32,64,128,256,512,1024,2048,4096,8192,16384,32768))
kern.cp_time=6319,0,2669,1115,253,179967
kern.nchstats.good_hits=1681017
kern.nchstats.negative_hits=73165
kern.nchstats.bad_hits=22251
kern.nchstats.false_hits=2
kern.nchstats.misses=121276
kern.nchstats.long_names=8567
kern.nchstats.pass2=4464
kern.nchstats.2passes=6833
kern.nchstats.ncs_revhits=718
kern.nchstats.ncs_revmiss=4
kern.nchstats.ncs_dothits=0
kern.nchstats.nch_dotdothits=0
kern.forkstat.forks=971
kern.forkstat.vforks=10
kern.forkstat.tforks=461
kern.forkstat.kthreads=42
kern.forkstat.fork_pages=109530
kern.forkstat.vfork_pages=591
kern.forkstat.tfork_pages=0
kern.forkstat.kthread_pages=0
kern.nselcoll=531
kern.tty.tk_nin=6226
kern.tty.tk_nout=801003
kern.tty.tk_rawcc=6156
kern.tty.tk_cancc=70
kern.ccpu=1948
kern.fscale=2048
kern.nprocs=98
kern.stackgap_random=262144
kern.allowkmem=0
kern.splassert=1
kern.nfiles=329
kern.ttycount=9
kern.numvnodes=39984
kern.seminfo.semmni=10
kern.seminfo.semmns=60
kern.seminfo.semmnu=30
kern.seminfo.semmsl=60
kern.seminfo.semopm=100
kern.seminfo.semume=10
kern.seminfo.semusz=112
kern.seminfo.semvmx=32767
kern.seminfo.semaem=16384
kern.shminfo.shmmax=33554432
kern.shminfo.shmmin=1
kern.shminfo.shmmni=128
kern.shminfo.shmseg=128
kern.shminfo.shmall=8192
kern.maxclusters=262144
kern.timecounter.tick=1
kern.timecounter.timestepwarnings=0
kern.timecounter.hardware=tsc
kern.timecounter.choice=i8254(0) tsc(2000) acpihpet0(1000) acpitimer0(1000)
kern.maxlocksperuid=1024
kern.bufcachepercent=20
kern.wxabort=0
kern.consdev=ttyC0
kern.netlivelocks=618
kern.pool_debug=0
kern.global_ptrace=0
kern.audio.record=0
kern.timeout_stats=added = 1554618, cancelled = 553514, deleted =
1708155, late = 2510, pending = 48, readded = 307172, rescheduled =
727171, run_softclock = 677794, run_thread = 16090, softclocks = 189691,
thread_wakeups = 15588
kern.utc_offset=0
vm.loadavg=0.36 0.23 0.13
vm.psstrings=0x7f7ffffe48e0
vm.swapencrypt.enable=1
vm.swapencrypt.keyscreated=0
vm.swapencrypt.keysdeleted=0
vm.nkmempages=32768
vm.anonmin=10
vm.vtextmin=5
vm.vnodemin=10
vm.malloc_conf=
fs.posix.setuid=1
net.inet.ip.forwarding=1
net.inet.ip.redirect=1
net.inet.ip.ttl=64
net.inet.ip.sourceroute=0
net.inet.ip.directed-broadcast=0
net.inet.ip.portfirst=1024
net.inet.ip.portlast=49151
net.inet.ip.porthifirst=49152
net.inet.ip.porthilast=65535
net.inet.ip.maxqueue=300
net.inet.ip.encdebug=0
net.inet.ip.ipsec-expire-acquire=30
net.inet.ip.ipsec-invalid-life=60
net.inet.ip.ipsec-pfs=1
net.inet.ip.ipsec-soft-allocs=0
net.inet.ip.ipsec-allocs=0
net.inet.ip.ipsec-soft-bytes=0
net.inet.ip.ipsec-bytes=0
net.inet.ip.ipsec-timeout=86400
net.inet.ip.ipsec-soft-timeout=80000
net.inet.ip.ipsec-soft-firstuse=3600
net.inet.ip.ipsec-firstuse=7200
net.inet.ip.ipsec-enc-alg=aes
net.inet.ip.ipsec-auth-alg=hmac-sha1
net.inet.ip.mtudisc=1
net.inet.ip.mtudisctimeout=600
net.inet.ip.ipsec-comp-alg=deflate
net.inet.ip.mforwarding=0
net.inet.ip.multipath=0
net.inet.ip.mrtproto=19
net.inet.ip.arpqueued=0
net.inet.ip.arptimeout=1200
net.inet.ip.arpdown=20
net.inet.ip.arpq.len=0
net.inet.ip.arpq.maxlen=50
net.inet.ip.arpq.drops=0
net.inet.icmp.maskrepl=0
net.inet.icmp.bmcastecho=0
net.inet.icmp.errppslimit=100
net.inet.icmp.rediraccept=0
net.inet.icmp.redirtimeout=600
net.inet.icmp.tstamprepl=1
net.inet.ipip.allow=0
net.inet.tcp.rfc1323=1
net.inet.tcp.keepinittime=150
net.inet.tcp.keepidle=14400
net.inet.tcp.keepintvl=150
net.inet.tcp.slowhz=2
net.inet.tcp.baddynamic=1,7,9,11,13,15,17,18,19,20,21,22,23,25,37,42,43,49,53,57,67,68,70,77,79,80,87,88,95,101,102,103,104,105,106,107,109,110,111,113,115,117,119,123,129,135,137,138,139,143,152,163,164,177,178,179,191,194,199,201,202,204,206,210,213,220,372,389,427,433,443,444,445,464,465,468,512,513,514,515,521,526,530,531,532,540,543,544,545,548,554,556,587,631,636,646,706,749,750,751,754,760,853,871,873,888,901,993,995,1080,1109,1127,1433,1434,1524,1525,1529,1723,1900,2049,2105,2106,2108,2110,2111,2112,2120,2121,2401,2600,2601,2602,2603,2604,2605,2606,2607,2608,2627,2983,3031,3109,3260,3306,3389,3517,3689,3690,4190,4444,4500,4559,5002,5060,5222,5269,5280,5298,5353,5354,5432,5680,5900,6000,6001,6002,6003,6004,6005,6006,6007,6008,6009,6010,6514,6566,7000,7001,7002,7003,7004,7005,7006,7007,7008,7009,7326,8025,8026,8140,8953,9418,10050,10051,16992,16993,16994,16995,20005
net.inet.tcp.sack=1
net.inet.tcp.mssdflt=512
net.inet.tcp.rstppslimit=100
net.inet.tcp.ackonpush=0
net.inet.tcp.ecn=0
net.inet.tcp.syncachelimit=10255
net.inet.tcp.synbucketlimit=105
net.inet.tcp.rfc3390=2
net.inet.tcp.reasslimit=32768
net.inet.tcp.sackholelimit=32768
net.inet.tcp.always_keepalive=0
net.inet.tcp.synuselimit=100000
net.inet.tcp.rootonly=2049
net.inet.tcp.synhashsize=293
net.inet.udp.checksum=1
net.inet.udp.baddynamic=7,9,13,18,19,22,37,39,49,53,67,68,69,70,80,88,105,107,109,110,111,123,129,135,137,138,139,143,161,162,163,164,177,178,179,191,194,199,201,202,204,206,210,213,220,372,389,427,444,445,464,468,500,512,513,514,517,518,520,525,533,546,547,548,554,587,623,631,636,646,664,706,749,750,751,853,993,995,1433,1434,1524,1525,1645,1646,1701,1723,1812,1813,1900,2049,2401,3031,3517,3689,3784,3785,4190,4444,4500,4559,4754,4755,4789,5002,5060,5298,5353,5354,5432,7000,7001,7002,7003,7004,7005,7006,7007,7008,7009,7784,8025,8067,9418,10050,10051,16992,16993,16994,16995,20005,26740
net.inet.udp.recvspace=41600
net.inet.udp.sendspace=9216
net.inet.udp.rootonly=2049
net.inet.gre.allow=0
net.inet.gre.wccp=0
net.inet.esp.enable=1
net.inet.esp.udpencap=1
net.inet.esp.udpencap_port=4500
net.inet.ah.enable=1
net.inet.etherip.allow=0
net.inet.ipcomp.enable=0
net.inet.carp.allow=1
net.inet.carp.preempt=0
net.inet.carp.log=2
net.inet.divert.recvspace=65636
net.inet.divert.sendspace=65636
net.inet6.ip6.forwarding=0
net.inet6.ip6.redirect=1
net.inet6.ip6.hlim=64
net.inet6.ip6.mrtproto=0
net.inet6.ip6.maxfragpackets=200
net.inet6.ip6.log_interval=5
net.inet6.ip6.hdrnestlimit=10
net.inet6.ip6.dad_count=1
net.inet6.ip6.auto_flowlabel=1
net.inet6.ip6.defmcasthlim=1
net.inet6.ip6.use_deprecated=1
net.inet6.ip6.maxfrags=200
net.inet6.ip6.mforwarding=0
net.inet6.ip6.multipath=0
net.inet6.ip6.multicast_mtudisc=0
net.inet6.ip6.neighborgcthresh=2048
net.inet6.ip6.maxdynroutes=4096
net.inet6.ip6.dad_pending=0
net.inet6.ip6.mtudisctimeout=600
net.inet6.icmp6.redirtimeout=600
net.inet6.icmp6.nd6_delay=5
net.inet6.icmp6.nd6_umaxtries=3
net.inet6.icmp6.nd6_mmaxtries=3
net.inet6.icmp6.errppslimit=100
net.inet6.icmp6.nd6_maxnudhint=0
net.inet6.icmp6.mtudisc_hiwat=1280
net.inet6.icmp6.mtudisc_lowat=256
net.inet6.icmp6.nd6_debug=0
net.inet6.divert.recvspace=65636
net.inet6.divert.sendspace=65636
net.bpf.bufsize=32768
net.bpf.maxbufsize=2097152
net.mpls.ttl=255
net.mpls.maxloop_inkernel=16
net.mpls.mapttl_ip=1
net.mpls.mapttl_ip6=0
net.pipex.enable=0
net.pipex.inq.len=0
net.pipex.inq.maxlen=256
net.pipex.inq.drops=0
net.pipex.outq.len=0
net.pipex.outq.maxlen=256
net.pipex.outq.drops=0
hw.machine=amd64
hw.model=Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz
hw.ncpu=4
hw.byteorder=1234
hw.pagesize=4096
hw.disknames=sd0:e7ac42577fa8a793
hw.diskcount=1
hw.sensors.cpu0.temp0=52.00 degC
hw.sensors.acpitz0.temp0=56.00 degC (zone temperature)
hw.sensors.acpibtn0.indicator0=On (lid open)
hw.sensors.acpibat0.volt0=11.10 VDC (voltage)
hw.sensors.acpibat0.volt1=11.24 VDC (current voltage)
hw.sensors.acpibat0.power0=23.58 W (rate)
hw.sensors.acpibat0.watthour0=75.48 Wh (last full capacity)
hw.sensors.acpibat0.watthour1=3.77 Wh (warning capacity)
hw.sensors.acpibat0.watthour2=0.20 Wh (low capacity)
hw.sensors.acpibat0.watthour3=64.49 Wh (remaining capacity), OK
hw.sensors.acpibat0.watthour4=86.58 Wh (design capacity)
hw.sensors.acpibat0.raw0=1 (battery discharging), OK
hw.sensors.acpiac0.indicator0=Off (power supply)
hw.sensors.acpithinkpad0.temp0=56.00 degC
hw.sensors.acpithinkpad0.temp1=56.00 degC
hw.sensors.acpithinkpad0.temp2=56.00 degC
hw.sensors.acpithinkpad0.temp3=56.00 degC
hw.sensors.acpithinkpad0.temp4=56.00 degC
hw.sensors.acpithinkpad0.temp5=56.00 degC
hw.sensors.acpithinkpad0.temp6=56.00 degC
hw.sensors.acpithinkpad0.temp7=56.00 degC
hw.sensors.acpithinkpad0.fan0=2991 RPM
hw.sensors.acpithinkpad0.indicator0=Off (port replicator), UNKNOWN
hw.sensors.acpidock0.indicator0=Off (not docked), UNKNOWN
hw.sensors.aps0.temp0=36.00 degC
hw.sensors.aps0.temp1=36.00 degC
hw.sensors.aps0.indicator0=On (Keyboard Active)
hw.sensors.aps0.indicator1=Off (Mouse Active)
hw.sensors.aps0.indicator2=On (Lid Open)
hw.sensors.aps0.raw0=512 (X_ACCEL)
hw.sensors.aps0.raw1=514 (Y_ACCEL)
hw.sensors.aps0.raw2=512 (X_VAR)
hw.sensors.aps0.raw3=514 (Y_VAR)
hw.cpuspeed=800
hw.setperf=0
hw.vendor=LENOVO
hw.product=4290LT8
hw.version=ThinkPad X220
hw.serialno=R9K0F2G
hw.uuid=813e58cc-e843-cb11-ac34-ca10cd4a1ef7
hw.physmem=8451125248
hw.usermem=8431665152
hw.ncpufound=4
hw.allowpowerdown=1
hw.perfpolicy=auto
hw.smt=1
hw.ncpuonline=4
machdep.console_device=ttyC0
machdep.bios.diskinfo.128=bootdev = 0xa0000204, cylinders = 1023, heads
= 255, sectors = 63
machdep.bios.cksumlen=1
machdep.allowaperture=0
machdep.cpuvendor=GenuineIntel
machdep.cpuid=0x206a7
machdep.cpufeature=0xbffbfbff
machdep.kbdreset=0
machdep.xcrypt=0
machdep.lidaction=1
machdep.forceukbd=0
machdep.tscfreq=2491906963
machdep.invarianttsc=1
machdep.pwraction=1
ddb.radix=16
ddb.max_width=80
ddb.max_line=24
ddb.tab_stop_width=8
ddb.panic=1
ddb.console=0
ddb.log=1
ddb.trigger=0
vfs.mounts.ffs has 9 mounted instances
vfs.ffs.max_softdeps=23704
vfs.ffs.sd_tickdelay=2
vfs.ffs.sd_worklist_push=0
vfs.ffs.sd_blk_limit_push=0
vfs.ffs.sd_ino_limit_push=0
vfs.ffs.sd_blk_limit_hit=0
vfs.ffs.sd_ino_limit_hit=0
vfs.ffs.sd_sync_limit_hit=0
vfs.ffs.sd_indir_blk_ptrs=0
vfs.ffs.sd_inode_bitmap=0
vfs.ffs.sd_direct_blk_ptrs=0
vfs.ffs.sd_dir_entry=0
vfs.ffs.dirhash_dirsize=2560
vfs.ffs.dirhash_maxmem=5242880
vfs.ffs.dirhash_mem=422071
vfs.nfs.iothreads=-1
vfs.fuse.fusefs_open_devices=0
vfs.fuse.fusefs_fbufs_in=0
vfs.fuse.fusefs_fbufs_wait=0
vfs.fuse.fusefs_pool_pages=0

Xorg.0.log:

[    22.612] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
     (Operation not permitted)
     Check that you have set 'machdep.allowaperture=1'
     in /etc/sysctl.conf and reboot your machine
     refer to xf86(4) for details
[    22.612]     linear framebuffer access unavailable
[    22.644] (--) Using wscons driver on /dev/ttyC4
[    22.661]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[    22.661] Build Operating System: OpenBSD 6.6 amd64
[    22.661] Current Operating System: OpenBSD neptune.lan 6.6
GENERIC.MP#372 amd64
[    22.662] Build Date: 12 October 2019  11:22:22AM
[    22.662]
[    22.662] Current version of pixman: 0.38.4
[    22.662]     Before reporting problems, check http://wiki.x.org
     to make sure that you have the latest version.
[    22.662] Markers: (--) probed, (**) from config file, (==) default
setting,
     (++) from command line, (!!) notice, (II) informational,
     (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    22.662] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 27
10:28:59 2019
[    22.663] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[    22.664] (==) No Layout section.  Using the first Screen section.
[    22.664] (==) No screen section available. Using defaults.
[    22.664] (**) |-->Screen "Default Screen Section" (0)
[    22.664] (**) |   |-->Monitor "<default monitor>"
[    22.666] (==) No monitor specified for screen "Default Screen Section".
     Using a default monitor configuration.
[    22.666] (==) Automatically adding devices
[    22.666] (==) Automatically enabling devices
[    22.666] (==) Not automatically adding GPU devices
[    22.666] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    22.671] (==) FontPath set to:
     /usr/X11R6/lib/X11/fonts/misc/,
     /usr/X11R6/lib/X11/fonts/TTF/,
     /usr/X11R6/lib/X11/fonts/OTF/,
     /usr/X11R6/lib/X11/fonts/Type1/,
     /usr/X11R6/lib/X11/fonts/100dpi/,
     /usr/X11R6/lib/X11/fonts/75dpi/
[    22.671] (==) ModulePath set to "/usr/X11R6/lib/modules"
[    22.671] (II) The server relies on wscons to provide the list of
input devices.
     If no devices become available, reconfigure wscons or disable
AutoAddDevices.
[    22.672] (II) Loader magic: 0xdde2db3d000
[    22.672] (II) Module ABI versions:
[    22.672]     X.Org ANSI C Emulation: 0.4
[    22.672]     X.Org Video Driver: 24.0
[    22.672]     X.Org XInput driver : 24.1
[    22.672]     X.Org Server Extension : 10.0
[    22.672] (--) PCI:*(0@0:2:0) 8086:0126:17aa:21da rev 9, Mem @
0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
[    22.672] (II) LoadModule: "glx"
[    22.674] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[    22.684] (II) Module glx: vendor="X.Org Foundation"
[    22.684]     compiled for 1.20.5, module version = 1.0.0
[    22.684]     ABI class: X.Org Server Extension, version 10.0
[    22.684] (==) Matched modesetting as autoconfigured driver 0
[    22.684] (==) Assigned the driver to the xf86ConfigLayout
[    22.684] (II) LoadModule: "modesetting"
[    22.685] (II) Loading /usr/X11R6/lib/modules/drivers/modesetting_drv.so
[    22.686] (II) Module modesetting: vendor="X.Org Foundation"
[    22.686]     compiled for 1.20.5, module version = 1.20.5
[    22.686]     Module class: X.Org Video Driver
[    22.686]     ABI class: X.Org Video Driver, version 24.0
[    22.686] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    22.690] (**) modeset(0): claimed PCI slot 0@0:2:0
[    22.690] (II) modeset(0): using default device
[    22.707] (II) modeset(0): Creating default Display subsection in
Screen section
     "Default Screen Section" for depth/fbbpp 24/32
[    22.707] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    22.707] (==) modeset(0): RGB weight 888
[    22.707] (==) modeset(0): Default visual is TrueColor
[    22.707] (II) Loading sub module "glamoregl"
[    22.707] (II) LoadModule: "glamoregl"
[    22.709] (II) Loading /usr/X11R6/lib/modules/libglamoregl.so
[    22.719] (II) Module glamoregl: vendor="X.Org Foundation"
[    22.719]     compiled for 1.20.5, module version = 1.0.1
[    22.719]     ABI class: X.Org ANSI C Emulation, version 0.4
[    22.799] (II) modeset(0): glamor X acceleration enabled on Mesa DRI
Intel(R) Sandybridge Mobile
[    22.799] (II) modeset(0): glamor initialized
[    22.799] (II) modeset(0): Output LVDS-1 has no monitor section
[    22.801] (II) modeset(0): Output VGA-1 has no monitor section
[    22.995] (II) modeset(0): Output HDMI-1 has no monitor section
[    22.995] (II) modeset(0): Output DP-1 has no monitor section
[    22.998] (II) modeset(0): Output HDMI-2 has no monitor section
[    23.001] (II) modeset(0): Output HDMI-3 has no monitor section
[    23.001] (II) modeset(0): Output DP-2 has no monitor section
[    23.001] (II) modeset(0): Output DP-3 has no monitor section
[    23.002] (II) modeset(0): EDID for output LVDS-1
[    23.002] (II) modeset(0): Manufacturer: AUO  Model: 106c Serial#: 0
[    23.002] (II) modeset(0): Year: 2010  Week: 0
[    23.002] (II) modeset(0): EDID Version: 1.4
[    23.003] (II) modeset(0): Digital Display Input
[    23.003] (II) modeset(0): 6 bits per channel
[    23.003] (II) modeset(0): Digital interface is undefined
[    23.003] (II) modeset(0): Max Image Size [cm]: horiz.: 28 vert.: 16
[    23.003] (II) modeset(0): Gamma: 2.20
[    23.003] (II) modeset(0): No DPMS capabilities specified
[    23.003] (II) modeset(0): Supported color encodings: RGB 4:4:4
[    23.003] (II) modeset(0): First detailed timing is preferred mode
[    23.003] (II) modeset(0): Preferred mode is native pixel format and
refresh rate
[    23.003] (II) modeset(0): redX: 0.570 redY: 0.334   greenX: 0.328
greenY: 0.570
[    23.003] (II) modeset(0): blueX: 0.159 blueY: 0.146   whiteX: 0.313
whiteY: 0.329
[    23.003] (II) modeset(0): Manufacturer's mask: 0
[    23.003] (II) modeset(0): Supported detailed timing:
[    23.003] (II) modeset(0): clock: 69.3 MHz   Image Size:  277 x 156 mm
[    23.003] (II) modeset(0): h_active: 1366  h_sync: 1414 h_sync_end
1446 h_blank_end 1454 h_border: 0
[    23.003] (II) modeset(0): v_active: 768  v_sync: 771 v_sync_end 777
v_blanking: 793 v_border: 0
[    23.003] (II) modeset(0): Unknown vendor-specific block f
[    23.003] (II) modeset(0):  AUO
[    23.003] (II) modeset(0):  B125XW01 V0
[    23.003] (II) modeset(0): EDID (in hex):
[    23.003] (II) modeset(0):     00ffffffffffff0006af6c1000000000
[    23.003] (II) modeset(0):     00140104901c10780220e59255549228
[    23.003] (II) modeset(0):     25505400000001010101010101010101
[    23.003] (II) modeset(0):     010101010101121b5658500019303020
[    23.003] (II) modeset(0):     3600159c100000180000000f00000000
[    23.003] (II) modeset(0):     00000000000000000020000000fe0041
[    23.003] (II) modeset(0):     554f0a202020202020202020000000fe
[    23.003] (II) modeset(0):     004231323558573031205630200a00ec
[    23.004] (II) modeset(0): Printing probed modes for output LVDS-1
[    23.004] (II) modeset(0): Modeline "1366x768"x60.1   69.30 1366 1414
1446 1454  768 771 777 793 -hsync -vsync (47.7 kHz eP)
[    23.004] (II) modeset(0): Modeline "1280x720"x120.0  156.12 1280
1376 1512 1744  720 721 724 746 doublescan -hsync +vsync (89.5 kHz d)
[    23.004] (II) modeset(0): Modeline "1280x720"x120.0  120.75 1280
1304 1320 1360  720 721 724 740 doublescan +hsync -vsync (88.8 kHz d)
[    23.004] (II) modeset(0): Modeline "1280x720"x59.9   74.50 1280 1344
1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz d)
[    23.004] (II) modeset(0): Modeline "1280x720"x59.7   63.75 1280 1328
1360 1440  720 723 728 741 +hsync -vsync (44.3 kHz d)
[    23.004] (II) modeset(0): Modeline "1024x768"x120.1  133.47 1024
1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    23.004] (II) modeset(0): Modeline "1024x768"x60.0   65.00 1024 1048
1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    23.004] (II) modeset(0): Modeline "960x720"x120.0  117.00 960 1024
1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    23.004] (II) modeset(0): Modeline "928x696"x120.1  109.15 928 976
1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    23.004] (II) modeset(0): Modeline "896x672"x120.0  102.40 896 960
1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    23.004] (II) modeset(0): Modeline "1024x576"x119.9   98.50 1024
1092 1200 1376  576 577 580 597 doublescan -hsync +vsync (71.6 kHz d)
[    23.004] (II) modeset(0): Modeline "1024x576"x119.9   78.38 1024
1048 1064 1104  576 577 580 592 doublescan +hsync -vsync (71.0 kHz d)
[    23.004] (II) modeset(0): Modeline "1024x576"x59.9   46.50 1024 1064
1160 1296  576 579 584 599 -hsync +vsync (35.9 kHz d)
[    23.004] (II) modeset(0): Modeline "1024x576"x59.8   42.00 1024 1072
1104 1184  576 579 584 593 +hsync -vsync (35.5 kHz d)
[    23.004] (II) modeset(0): Modeline "960x600"x119.9   96.62 960 1028
1128 1296  600 601 604 622 doublescan -hsync +vsync (74.6 kHz d)
[    23.004] (II) modeset(0): Modeline "960x600"x120.0   77.00 960 984
1000 1040  600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[    23.004] (II) modeset(0): Modeline "960x540"x119.9   86.50 960 1024
1124 1288  540 541 544 560 doublescan -hsync +vsync (67.2 kHz d)
[    23.004] (II) modeset(0): Modeline "960x540"x120.0   69.25 960 984
1000 1040  540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[    23.004] (II) modeset(0): Modeline "960x540"x59.6   40.75  960 992
1088 1216  540 543 548 562 -hsync +vsync (33.5 kHz d)
[    23.004] (II) modeset(0): Modeline "960x540"x59.8   37.25  960 1008
1040 1120  540 543 548 556 +hsync -vsync (33.3 kHz d)
[    23.004] (II) modeset(0): Modeline "800x600"x120.0   81.00 800 832
928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    23.004] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840
968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    23.004] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824
896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    23.004] (II) modeset(0): Modeline "840x525"x120.0   73.12 840 892
980 1120  525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[    23.004] (II) modeset(0): Modeline "840x525"x119.8   59.50 840 864
880 920  525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[    23.004] (II) modeset(0): Modeline "864x486"x59.9   32.50  864 888
968 1072  486 489 494 506 -hsync +vsync (30.3 kHz d)
[    23.004] (II) modeset(0): Modeline "864x486"x59.6   30.50  864 912
944 1024  486 489 494 500 +hsync -vsync (29.8 kHz d)
[    23.004] (II) modeset(0): Modeline "700x525"x120.0   61.00 700 744
820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    23.004] (II) modeset(0): Modeline "800x450"x119.9   59.12 800 848
928 1056  450 451 454 467 doublescan -hsync +vsync (56.0 kHz d)
[    23.004] (II) modeset(0): Modeline "800x450"x119.6   48.75 800 824
840 880  450 451 454 463 doublescan +hsync -vsync (55.4 kHz d)
[    23.004] (II) modeset(0): Modeline "640x512"x120.0   54.00 640 664
720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    23.004] (II) modeset(0): Modeline "700x450"x119.9   51.75 700 740
812 924  450 451 456 467 doublescan -hsync +vsync (56.0 kHz d)
[    23.004] (II) modeset(0): Modeline "700x450"x119.8   43.25 700 724
740 780  450 451 456 463 doublescan +hsync -vsync (55.4 kHz d)
[    23.004] (II) modeset(0): Modeline "640x480"x120.0   54.00 640 688
744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    23.004] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656
752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    23.004] (II) modeset(0): Modeline "720x405"x59.5   22.50  720 744
808 896  405 408 413 422 -hsync +vsync (25.1 kHz d)
[    23.004] (II) modeset(0): Modeline "720x405"x59.0   21.75  720 768
800 880  405 408 413 419 +hsync -vsync (24.7 kHz d)
[    23.004] (II) modeset(0): Modeline "684x384"x119.8   42.62 684 720
788 892  384 385 390 399 doublescan -hsync +vsync (47.8 kHz d)
[    23.004] (II) modeset(0): Modeline "684x384"x119.7   36.12 684 708
724 764  384 385 390 395 doublescan +hsync -vsync (47.3 kHz d)
[    23.004] (II) modeset(0): Modeline "640x400"x119.8   41.75 640 676
740 840  400 401 404 415 doublescan -hsync +vsync (49.7 kHz d)
[    23.004] (II) modeset(0): Modeline "640x400"x120.0   35.50 640 664
680 720  400 401 404 411 doublescan +hsync -vsync (49.3 kHz d)
[    23.004] (II) modeset(0): Modeline "640x360"x119.7   37.25 640 672
736 832  360 361 364 374 doublescan -hsync +vsync (44.8 kHz d)
[    23.004] (II) modeset(0): Modeline "640x360"x119.7   31.88 640 664
680 720  360 361 364 370 doublescan +hsync -vsync (44.3 kHz d)
[    23.004] (II) modeset(0): Modeline "640x360"x59.8   18.00  640 664
720 800  360 363 368 376 -hsync +vsync (22.5 kHz d)
[    23.004] (II) modeset(0): Modeline "640x360"x59.3   17.75  640 688
720 800  360 363 368 374 +hsync -vsync (22.2 kHz d)
[    23.004] (II) modeset(0): Modeline "512x384"x120.0   32.50 512 524
592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    23.004] (II) modeset(0): Modeline "512x288"x120.0   23.25 512 532
580 648  288 289 292 299 doublescan -hsync +vsync (35.9 kHz d)
[    23.004] (II) modeset(0): Modeline "512x288"x119.8   21.00 512 536
552 592  288 289 292 296 doublescan +hsync -vsync (35.5 kHz d)
[    23.005] (II) modeset(0): Modeline "480x270"x119.3   20.38 480 496
544 608  270 271 274 281 doublescan -hsync +vsync (33.5 kHz d)
[    23.005] (II) modeset(0): Modeline "480x270"x119.6   18.62 480 504
520 560  270 271 274 278 doublescan +hsync -vsync (33.3 kHz d)
[    23.005] (II) modeset(0): Modeline "400x300"x120.6   20.00 400 420
484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    23.005] (II) modeset(0): Modeline "400x300"x112.7   18.00 400 412
448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    23.005] (II) modeset(0): Modeline "432x243"x119.8   16.25 432 444
484 536  243 244 247 253 doublescan -hsync +vsync (30.3 kHz d)
[    23.005] (II) modeset(0): Modeline "432x243"x119.1   15.25 432 456
472 512  243 244 247 250 doublescan +hsync -vsync (29.8 kHz d)
[    23.005] (II) modeset(0): Modeline "320x240"x120.1   12.59 320 328
376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    23.005] (II) modeset(0): Modeline "360x202"x119.0   11.25 360 372
404 448  202 204 206 211 doublescan -hsync +vsync (25.1 kHz d)
[    23.005] (II) modeset(0): Modeline "360x202"x118.3   10.88 360 384
400 440  202 204 206 209 doublescan +hsync -vsync (24.7 kHz d)
[    23.005] (II) modeset(0): Modeline "320x180"x119.7    9.00 320 332
360 400  180 181 184 188 doublescan -hsync +vsync (22.5 kHz d)
[    23.005] (II) modeset(0): Modeline "320x180"x118.6    8.88 320 344
360 400  180 181 184 187 doublescan +hsync -vsync (22.2 kHz d)
[    23.007] (II) modeset(0): EDID for output VGA-1
[    23.202] (II) modeset(0): EDID for output HDMI-1
[    23.202] (II) modeset(0): EDID for output DP-1
[    23.204] (II) modeset(0): EDID for output HDMI-2
[    23.207] (II) modeset(0): EDID for output HDMI-3
[    23.207] (II) modeset(0): EDID for output DP-2
[    23.207] (II) modeset(0): EDID for output DP-3
[    23.207] (II) modeset(0): Output LVDS-1 connected
[    23.207] (II) modeset(0): Output VGA-1 disconnected
[    23.207] (II) modeset(0): Output HDMI-1 disconnected
[    23.207] (II) modeset(0): Output DP-1 disconnected
[    23.207] (II) modeset(0): Output HDMI-2 disconnected
[    23.207] (II) modeset(0): Output HDMI-3 disconnected
[    23.207] (II) modeset(0): Output DP-2 disconnected
[    23.207] (II) modeset(0): Output DP-3 disconnected
[    23.207] (II) modeset(0): Using exact sizes for initial modes
[    23.207] (II) modeset(0): Output LVDS-1 using initial mode 1366x768 +0+0
[    23.207] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    23.207] (==) modeset(0): DPI set to (96, 96)
[    23.207] (II) Loading sub module "fb"
[    23.207] (II) LoadModule: "fb"
[    23.208] (II) Loading /usr/X11R6/lib/modules/libfb.so
[    23.210] (II) Module fb: vendor="X.Org Foundation"
[    23.210]     compiled for 1.20.5, module version = 1.0.0
[    23.210]     ABI class: X.Org ANSI C Emulation, version 0.4
[    23.414] (==) modeset(0): Backing store enabled
[    23.414] (==) modeset(0): Silken mouse enabled
[    23.443] (II) modeset(0): Initializing kms color map for depth 24, 8
bpc.
[    23.443] (==) modeset(0): DPMS enabled
[    23.444] (II) modeset(0): [DRI2] Setup complete
[    23.444] (II) modeset(0): [DRI2]   DRI driver: i965
[    23.444] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    23.444] (II) Initializing extension Generic Event Extension
[    23.445] (II) Initializing extension SHAPE
[    23.446] (II) Initializing extension MIT-SHM
[    23.447] (II) Initializing extension XInputExtension
[    23.448] (II) Initializing extension XTEST
[    23.449] (II) Initializing extension BIG-REQUESTS
[    23.449] (II) Initializing extension SYNC
[    23.450] (II) Initializing extension XKEYBOARD
[    23.451] (II) Initializing extension XC-MISC
[    23.451] (II) Initializing extension SECURITY
[    23.452] (II) Initializing extension XFIXES
[    23.453] (II) Initializing extension RENDER
[    23.454] (II) Initializing extension RANDR
[    23.455] (II) Initializing extension COMPOSITE
[    23.456] (II) Initializing extension DAMAGE
[    23.457] (II) Initializing extension MIT-SCREEN-SAVER
[    23.457] (II) Initializing extension DOUBLE-BUFFER
[    23.458] (II) Initializing extension RECORD
[    23.459] (II) Initializing extension DPMS
[    23.460] (II) Initializing extension Present
[    23.460] (II) Initializing extension DRI3
[    23.461] (II) Initializing extension X-Resource
[    23.462] (II) Initializing extension XVideo
[    23.463] (II) Initializing extension XVideo-MotionCompensation
[    23.463] (II) Initializing extension GLX
[    23.496] (II) AIGLX: Loaded and initialized i965
[    23.496] (II) GLX: Initialized DRI2 GL provider for screen 0
[    23.496] (II) Initializing extension XFree86-VidModeExtension
[    23.496] (II) Initializing extension XFree86-DGA
[    23.497] (II) Initializing extension XFree86-DRI
[    23.497] (II) Initializing extension DRI2
[    23.503] (II) modeset(0): Damage tracking initialized
[    23.503] (II) modeset(0): Setting screen physical size to 361 x 203
[    23.679] (II) config/wscons: checking input device /dev/wskbd
[    23.679] (II) wskbd: using layout us
[    23.679] (II) LoadModule: "kbd"
[    23.680] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[    23.681] (II) Module kbd: vendor="X.Org Foundation"
[    23.681]     compiled for 1.20.5, module version = 1.9.0
[    23.681]     Module class: X.Org XInput Driver
[    23.681]     ABI class: X.Org XInput driver, version 24.1
[    23.681] (II) Using input driver 'kbd' for '/dev/wskbd'
[    23.681] (**) /dev/wskbd: always reports core events
[    23.681] (**) /dev/wskbd: always reports core events
[    23.681] (**) Option "Protocol" "standard"
[    23.681] (**) Option "XkbRules" "base"
[    23.681] (**) Option "XkbModel" "pc105"
[    23.681] (**) Option "XkbLayout" "us"
[    23.682] (II) XINPUT: Adding extended input device "/dev/wskbd"
(type: KEYBOARD, id 6)
[    24.155] (II) config/wscons: checking input device /dev/wsmouse0
[    24.155] (II) LoadModule: "ws"
[    24.159] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[    24.160] (II) Module ws: vendor="X.Org Foundation"
[    24.160]     compiled for 1.20.5, module version = 1.3.0
[    24.160]     Module class: X.Org XInput Driver
[    24.160]     ABI class: X.Org XInput driver, version 24.1
[    24.160] (II) Using input driver 'ws' for '/dev/wsmouse0'
[    24.161] (**) /dev/wsmouse0: always reports core events
[    24.161] (II) ws: /dev/wsmouse0: debuglevel 0
[    24.161] (**) Option "Device" "/dev/wsmouse0"
[    24.161] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
[    24.161] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
[    24.161] (**) ws: /dev/wsmouse0: associated screen: 0
[    24.630] (II) ws: /dev/wsmouse0: minimum x position: 0
[    24.630] (II) ws: /dev/wsmouse0: maximum x position: 1365
[    24.630] (II) ws: /dev/wsmouse0: minimum y position: 0
[    24.630] (II) ws: /dev/wsmouse0: maximum y position: 767
[    24.630] (==) ws: /dev/wsmouse0: Buttons: 7
[    24.636] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
[    24.636] (II) XINPUT: Adding extended input device "/dev/wsmouse0"
(type: MOUSE, id 7)
[    25.100] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[    25.100] (**) /dev/wsmouse0: (accel) acceleration profile 0
[    25.100] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[    25.100] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[    25.101] (II) config/wscons: checking input device /dev/wsmouse
[    25.101] (II) Using input driver 'ws' for '/dev/wsmouse'
[    25.101] (**) /dev/wsmouse: always reports core events
[    25.101] (II) ws: /dev/wsmouse: debuglevel 0
[    25.101] (**) Option "Device" "/dev/wsmouse"
[    25.101] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[    25.101] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[    25.101] (**) ws: /dev/wsmouse: associated screen: 0
[    25.101] (II) ws: /dev/wsmouse: minimum x position: 0
[    25.101] (II) ws: /dev/wsmouse: maximum x position: 1365
[    25.101] (II) ws: /dev/wsmouse: minimum y position: 0
[    25.101] (II) ws: /dev/wsmouse: maximum y position: 767
[    25.101] (==) ws: /dev/wsmouse: Buttons: 7
[    25.101] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[    25.101] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 8)
[    25.102] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[    25.102] (**) /dev/wsmouse: (accel) acceleration profile 0
[    25.102] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[    25.102] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[    28.500] (II) AIGLX: Suspending AIGLX clients for VT switch
[   582.100] (II) AIGLX: Resuming AIGLX clients after VT switch
[   582.150] (II) modeset(0): EDID vendor "AUO", prod id 4204
[   582.151] (II) modeset(0): Printing DDC gathered Modelines:
[   582.151] (II) modeset(0): Modeline "1366x768"x0.0   69.30 1366 1414
1446 1454  768 771 777 793 -hsync -vsync (47.7 kHz eP)

Thanks

On 2019-10-23 08:51, Josh wrote:

> hi,
>
> After upgrading from 6.5 to 6.6 following the procedure [1], my Lenovo
> X1C 6G is getting hot all the time.
> Fan is constantly spinning at 4000+rpm even even if its just editing a
> note in zim.
> If I let the laptop idling, it will take quite some time for the fan
> to stop even if there is no high cpu usage processes (showing top CS
> processes).
>
> X session is started via xenodm using cwm only. See below .xsession.
> Tried with and without the following configuration file but behaviour
> remains the same.
> $ cat /etc/X11/xorg.conf.d/intel.conf
> Section "Device"
>     Identifier "drm"
>     Driver "intel"
>     Option "TearFree" "true"
> EndSection
>
> The only tweaks I added were from this link [2].
>
> apmd is started at boot, with -A flag. One thing I notice is that apm
> seems to change more frequently the hw.setperf setting to its max. My
> overall usage of the laptop did not change.
> Could it be related to some apm / performance adjustment changes
> between 6.5 and 6.6?
>
> Any other X1/Lenovo X2* owners facing that issue?
>
> Thank you
>
> [1] https://www.openbsd.org/faq/upgrade66.html
> [2] https://www.c0ffee.net/blog/openbsd-on-a-laptop/
>
> $ cat .xsession
> source $HOME/.profile
> xsetroot -solid dimgray
> xidle &
> xset dpms 180 240 300
> xset s off
> exec cwm
>
> $ cat /etc/sysctl.conf
> hw.allowpowerdown=1             # 0=Disable power button shutdown
> machdep.allowaperture=2         # See xf86(4)
> machdep.lidaction=1             # 1=suspend, 2=hibernate laptop upon lid closing
> machdep.pwraction=2             # ACPI power button action: 0=none, 2=suspend
> kern.audio.record=0
> kern.shminfo.shmall=3145728
> kern.shminfo.shmmax=2147483647
> kern.shminfo.shmmni=1024
> kern.shminfo.shmseg=1024
> kern.seminfo.semmns=4096
> kern.seminfo.semmni=1024
> kern.maxproc=32768
> kern.maxfiles=65535
> kern.bufcachepercent=50
> kern.maxvnodes=262144
> kern.somaxconn=2048
>
> $ dmesg
> OpenBSD 6.6 (GENERIC.MP) #372: Sat Oct 12 10:56:27 MDT 2019
>      [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16896438272 (16113MB)
> avail mem = 16371642368 (15613MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x9f049000 (63 entries)
> bios0: vendor LENOVO version "N23ET66W (1.41 )" date 09/02/2019
> bios0: LENOVO 20KHCTO1WW
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT UEFI SSDT SSDT HPET APIC MCFG ECDT SSDT
> SSDT BOOT BATB SSDT SSDT SSDT LPIT WSMT SSDT SSDT SSDT DBGP DBG2 MSDM
> DMAR NHLT ASF! FPDT UEFI
> acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4)
> PXSX(S4) RP02(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4)
> PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 23999999 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 1796.56 MHz, 06-8e-0a
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MO
> VBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,S
> SBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 24MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 1795.82 MHz, 06-8e-0a
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MO
> VBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,S
> SBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 1795.82 MHz, 06-8e-0a
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MO
> VBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,S
> SBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 1795.83 MHz, 06-8e-0a
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MO
> VBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,S
> SBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xf0000000, bus 0-127
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 2 (RP01)
> acpiprt2 at acpi0: bus -1 (RP02)
> acpiprt3 at acpi0: bus -1 (RP03)
> acpiprt4 at acpi0: bus -1 (RP04)
> acpiprt5 at acpi0: bus 4 (RP05)
> acpiprt6 at acpi0: bus -1 (RP06)
> acpiprt7 at acpi0: bus -1 (RP07)
> acpiprt8 at acpi0: bus -1 (RP08)
> acpiprt9 at acpi0: bus 5 (RP09)
> acpiprt10 at acpi0: bus -1 (RP10)
> acpiprt11 at acpi0: bus -1 (RP11)
> acpiprt12 at acpi0: bus -1 (RP12)
> acpiprt13 at acpi0: bus -1 (RP13)
> acpiprt14 at acpi0: bus -1 (RP14)
> acpiprt15 at acpi0: bus -1 (RP15)
> acpiprt16 at acpi0: bus -1 (RP16)
> acpiprt17 at acpi0: bus -1 (RP17)
> acpiprt18 at acpi0: bus -1 (RP18)
> acpiprt19 at acpi0: bus -1 (RP19)
> acpiprt20 at acpi0: bus -1 (RP20)
> acpiprt21 at acpi0: bus -1 (RP21)
> acpiprt22 at acpi0: bus -1 (RP22)
> acpiprt23 at acpi0: bus -1 (RP23)
> acpiprt24 at acpi0: bus -1 (RP24)
> acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: PUBS, resource for XHC_
> acpitz0 at acpi0: critical temperature is 128 degC
> acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
> acpithinkpad0 at acpi0
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "01AV430" serial  2745 type LiP oem "SMP"
> "LEN0100" at acpi0 not configured
> "INT3403" at acpi0 not configured
> acpicmos0 at acpi0
> "ALPS0000" at acpi0 not configured
> "INT0E0C" at acpi0 not configured
> acpibtn0 at acpi0: SLPB
> "PNP0C14" at acpi0 not configured
> acpibtn1 at acpi0: LID_
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "INT3400" at acpi0 not configured
> "USBC000" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout at acpivideo0 not configured
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 1796 MHz: speeds: 2101, 2100, 1900, 1800,
> 1700, 1600, 1500, 1400, 1200, 1100, 1000, 800, 700, 600, 500, 400 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x08
> inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 620" rev 0x07
> drm0 at inteldrm0
> inteldrm0: msi
> "Intel Core 6G Thermal" rev 0x08 at pci0 dev 4 function 0 not configured
> "Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
> "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
> ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
> pci1 at ppb0 bus 2
> iwm0 at pci1 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x78, msi
> ppb1 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
> pci2 at ppb1 bus 4
> nvme0 at pci2 dev 0 function 0 "SanDisk WD Black NVMe" rev 0x00: msix, NVMe 1.3
> nvme0: WDC PC SN720 SDAQNTW-512G-1001, firmware 10170101, serial 1848118022278
> scsibus1 at nvme0: 2 targets, initiator 0
> sd0 at scsibus1 targ 1 lun 0: <NVMe, WDC PC SN720 SDA, 1017>
> sd0: 488386MB, 512 bytes/sector, 1000215216 sectors
> ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
> pci3 at ppb2 bus 5
> pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
> "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
> azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi
> azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
> audio0 at azalia0
> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
> apic 2 int 16
> iic0 at ichiic0
> em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address
> e8:6a:3a:ea:ee:11
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.16, 0x1e2b1 0x940300
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> efifb at mainbus0 not configured
> uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB
> Receiver" rev 2.00/24.07 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB
> Receiver" rev 2.00/24.07 addr 2
> uhidev1: iclass 3/1, 8 report ids
> ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
> wsmouse2 at ums0 mux 0
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
> uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
> uhidev2 at uhub0 port 1 configuration 1 interface 2 "Logitech USB
> Receiver" rev 2.00/24.07 addr 2
> uhidev2: iclass 3/0, 33 report ids
> uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
> uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
> uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
> uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
> uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT Inc
> Integrated Camera" rev 2.01/17.11 addr 4
> video0 at uvideo0
> umass0 at uhub0 port 15 configuration 1 interface 0 "Generic
> USB3.0-CRW" rev 3.00/29.08 addr 5
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC CRW, 1.00> removable
> serial.0bda0328008282014000
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd2: 488385MB, 512 bytes/sector, 1000213601 sectors
> root on sd2a (2a9a4953b9283bc0.a) swap on sd2b dump on sd2b
> inteldrm0: 2560x1440, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wskbd1: connecting to wsdisplay0
> wskbd2: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> iwm0: hw rev 0x230, fw ver 22.361476.0, address 04:ea:aa:ee:00:7f
> [drm] *ERROR* Potential atomic update failure on pipe B
>
> $ cat /var/log/Xorg.0.log
> [    42.753] (--) checkDevMem: using aperture driver /dev/xf86
> [    42.831] (--) Using wscons driver on /dev/ttyC4
> [    42.850]
> X.Org X Server 1.20.5
> X Protocol Version 11, Revision 0
> [    42.850] Build Operating System: OpenBSD 6.6 amd64
> [    42.850] Current Operating System: OpenBSD x1.local 6.6 GENERIC.MP#372 amd64
> [    42.850] Build Date: 12 October 2019  11:22:22AM
> [    42.850]
> [    42.850] Current version of pixman: 0.38.4
> [    42.850]    Before reporting problems, check http://wiki.x.org
>          to make sure that you have the latest version.
> [    42.850] Markers: (--) probed, (**) from config file, (==) default setting,
>          (++) from command line, (!!) notice, (II) informational,
>          (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [    42.850] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 21
> 20:51:09 2019
> [    42.852] (==) Using config directory: "/etc/X11/xorg.conf.d"
> [    42.852] (==) Using system config directory
> "/usr/X11R6/share/X11/xorg.conf.d"
> [    42.854] (==) No Layout section.  Using the first Screen section.
> [    42.854] (==) No screen section available. Using defaults.
> [    42.854] (**) |-->Screen "Default Screen Section" (0)
> [    42.854] (**) |   |-->Monitor "<default monitor>"
> [    42.855] (==) No device specified for screen "Default Screen Section".
>          Using the first device section listed.
> [    42.855] (**) |   |-->Device "drm"
> [    42.855] (==) No monitor specified for screen "Default Screen Section".
>          Using a default monitor configuration.
> [    42.855] (==) Automatically adding devices
> [    42.855] (==) Automatically enabling devices
> [    42.855] (==) Not automatically adding GPU devices
> [    42.855] (==) Max clients allowed: 256, resource mask: 0x1fffff
> [    42.860] (==) FontPath set to:
>          /usr/X11R6/lib/X11/fonts/misc/,
>          /usr/X11R6/lib/X11/fonts/TTF/,
>          /usr/X11R6/lib/X11/fonts/OTF/,
>          /usr/X11R6/lib/X11/fonts/Type1/,
>          /usr/X11R6/lib/X11/fonts/100dpi/,
>          /usr/X11R6/lib/X11/fonts/75dpi/
> [    42.860] (==) ModulePath set to "/usr/X11R6/lib/modules"
> [    42.860] (II) The server relies on wscons to provide the list of
> input devices.
>          If no devices become available, reconfigure wscons or disable
> AutoAddDevices.
> [    42.860] (II) Loader magic: 0x214184a3000
> [    42.860] (II) Module ABI versions:
> [    42.860]    X.Org ANSI C Emulation: 0.4
> [    42.860]    X.Org Video Driver: 24.0
> [    42.860]    X.Org XInput driver : 24.1
> [    42.860]    X.Org Server Extension : 10.0
> [    42.861] (--) PCI:*(0@0:2:0) 8086:5917:17aa:225c rev 7, Mem @
> 0x2ffe000000/16777216, 0xc0000000/536870912, I/O @ 0x0000e000/64
> [    42.861] (II) LoadModule: "glx"
> [    42.862] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
> [    42.872] (II) Module glx: vendor="X.Org Foundation"
> [    42.872]    compiled for 1.20.5, module version = 1.0.0
> [    42.872]    ABI class: X.Org Server Extension, version 10.0
> [    42.872] (II) LoadModule: "intel"
> [    42.872] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
> [    42.875] (II) Module intel: vendor="X.Org Foundation"
> [    42.875]    compiled for 1.20.5, module version = 2.99.916
> [    42.875]    Module class: X.Org Video Driver
> [    42.875]    ABI class: X.Org Video Driver, version 24.0
> [    42.875] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
>          i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
>          915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
>          Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
>          GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
>          [    42.875] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
>          [    42.875] (II) intel: Driver for Intel(R) Iris(TM)
> Graphics: 5100, 6100
>          [    42.875] (II) intel: Driver for Intel(R) Iris(TM) Pro
> Graphics: 5200, 6200, P6300
>          [    42.918] (II) intel(0): Using Kernel Mode Setting driver:
> i915, version 1.6.0 20180719
>          [    42.920] (WW) intel(0): Unknown chipset
>          [    42.920] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3,
> sse4.1, sse4.2, avx, avx2
>          [    42.920] (II) intel(0): Creating default Display
> subsection in Screen section
>                  "Default Screen Section" for depth/fbbpp 24/32
>          [    42.920] (==) intel(0): Depth 24, (--) framebuffer bpp 32
>          [    42.920] (==) intel(0): RGB weight 888
>          [    42.920] (==) intel(0): Default visual is TrueColor
>          [    42.920] (**) intel(0): Option "TearFree" "true"
>          [    42.921] (II) intel(0): Output eDP1 has no monitor section
>          [    42.921] (--) intel(0): Found backlight control interface
> wscons (type 'platform') for output eDP1
>          [    42.921] (II) intel(0): Enabled output eDP1
>          [    42.921] (II) intel(0): Output DP1 has no monitor section
>          [    42.921] (II) intel(0): Enabled output DP1
>          [    42.921] (II) intel(0): Output HDMI1 has no monitor section
>          [    42.921] (II) intel(0): Enabled output HDMI1
>          [    42.921] (II) intel(0): Output DP2 has no monitor section
>          [    42.921] (II) intel(0): Enabled output DP2
>          [    42.921] (II) intel(0): Output HDMI2 has no monitor section
>          [    42.921] (II) intel(0): Enabled output HDMI2
>          [    42.921] (--) intel(0): Using a maximum size of 256x256
> for hardware cursors
>          [    42.921] (II) intel(0): Output VIRTUAL1 has no monitor section
>          [    42.921] (II) intel(0): Enabled output VIRTUAL1
>          [    42.921] (--) intel(0): Output eDP1 using initial mode
> 2560x1440 on pipe 0
>          [    42.921] (--) intel(0): Output HDMI1 using initial mode
> 1920x1200 on pipe 1
>          [    42.921] (**) intel(0): TearFree enabled
>          [    42.921] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
>          [    42.921] (==) intel(0): DPI set to (96, 96)
>          [    42.922] (II) Loading sub module "dri3"
>          [    42.922] (II) LoadModule: "dri3"
>          [    42.922] (II) Module "dri3" already built-in
>          [    42.922] (II) Loading sub module "dri2"
>          [    42.922] (II) LoadModule: "dri2"
>          [    42.922] (II) Module "dri2" already built-in
>          [    42.922] (II) Loading sub module "present"
>          [    42.922] (II) LoadModule: "present"
>          [    42.922] (II) Module "present" already built-in
>          [    42.923] (II) intel(0): SNA initialized with generic backend
>          [    42.923] (==) intel(0): Backing store enabled
>          [    42.923] (==) intel(0): Silken mouse enabled
>          [    42.924] (II) intel(0): HW Cursor enabled
>          [    42.926] (==) intel(0): DPMS enabled
>          [    42.927] (II) intel(0): Textured video not supported on
> this hardware
>          [    42.927] (II) intel(0): [DRI2] Setup complete
>          [    42.927] (II) intel(0): [DRI2]   DRI driver: i965
>          [    42.927] (II) intel(0): [DRI2]   VDPAU driver: i965
>          [    42.927] (II) intel(0): direct rendering: DRI2 DRI3 enabled
>          [    42.927] (II) intel(0): hardware support for Present enabled
>          [    42.927] (II) Initializing extension Generic Event Extension
>          [    42.928] (II) Initializing extension SHAPE
>          [    42.929] (II) Initializing extension MIT-SHM
>          [    42.929] (II) Initializing extension XInputExtension
>          [    42.930] (II) Initializing extension XTEST
>          [    42.930] (II) Initializing extension BIG-REQUESTS
>          [    42.931] (II) Initializing extension SYNC
>          [    42.931] (II) Initializing extension XKEYBOARD
>          [    42.932] (II) Initializing extension XC-MISC
>          [    42.932] (II) Initializing extension SECURITY
>          [    42.933] (II) Initializing extension XFIXES
>          [    42.933] (II) Initializing extension RENDER
>          [    42.934] (II) Initializing extension RANDR
>          [    42.935] (II) Initializing extension COMPOSITE
>          [    42.936] (II) Initializing extension DAMAGE
>          [    42.936] (II) Initializing extension MIT-SCREEN-SAVER
>          [    42.937] (II) Initializing extension DOUBLE-BUFFER
>          [    42.937] (II) Initializing extension RECORD
>          [    42.938] (II) Initializing extension DPMS
>          [    42.938] (II) Initializing extension Present
>          [    42.939] (II) Initializing extension DRI3
>          [    42.940] (II) Initializing extension X-Resource
>          [    42.940] (II) Initializing extension XVideo
>          [    42.940] (II) Initializing extension XVideo-MotionCompensation
>          [    42.940] (II) Initializing extension GLX
>          [    42.970] (II) AIGLX: Loaded and initialized i965
>          [    42.970] (II) GLX: Initialized DRI2 GL provider for screen 0
>          [    42.970] (II) Initializing extension XFree86-VidModeExtension
>          [    42.971] (II) Initializing extension XFree86-DGA
>          [    42.971] (II) Initializing extension XFree86-DRI
>          [    42.972] (II) Initializing extension DRI2
>          [    42.977] (II) intel(0): switch to mode 2560x1440@60.0 on
> eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
>          [    42.996] (II) intel(0): switch to mode 1920x1200@60.0 on
> HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
>          [    43.018] (II) intel(0): Setting screen physical size to 677 x 381
>          [    43.125] (II) config/wscons: checking input device /dev/wskbd
>          [    43.125] (II) wskbd: using layout us
>          [    43.125] (II) LoadModule: "kbd"
>          [    43.126] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
>          [    43.127] (II) Module kbd: vendor="X.Org Foundation"
>          [    43.127]    compiled for 1.20.5, module version = 1.9.0
>          [    43.127]    Module class: X.Org XInput Driver
>          [    43.127]    ABI class: X.Org XInput driver, version 24.1
>          [    43.127] (II) Using input driver 'kbd' for '/dev/wskbd'
>          [    43.127] (**) /dev/wskbd: always reports core events
>          [    43.127] (**) /dev/wskbd: always reports core events
>          [    43.127] (**) Option "Protocol" "standard"
>          [    43.128] (**) Option "XkbRules" "base"
>          [    43.128] (**) Option "XkbModel" "pc105"
>          [    43.128] (**) Option "XkbLayout" "us"
>          [    43.128] (II) XINPUT: Adding extended input device
> "/dev/wskbd" (type: KEYBOARD, id 6)
>          [    43.568] (II) config/wscons: checking input device /dev/wsmouse0
>          [    43.568] (II) LoadModule: "ws"
>          [    43.569] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
>          [    43.569] (II) Module ws: vendor="X.Org Foundation"
>          [    43.569]    compiled for 1.20.5, module version = 1.3.0
>          [    43.569]    Module class: X.Org XInput Driver
>          [    43.569]    ABI class: X.Org XInput driver, version 24.1
>          [    43.569] (II) Using input driver 'ws' for '/dev/wsmouse0'
>          [    43.569] (**) /dev/wsmouse0: always reports core events
>          [    43.570] (II) ws: /dev/wsmouse0: debuglevel 0
>          [    43.570] (**) Option "Device" "/dev/wsmouse0"
>          [    43.570] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
>          [    43.570] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
>          [    43.570] (**) ws: /dev/wsmouse0: associated screen: 0
>          [    44.007] (II) ws: /dev/wsmouse0: minimum x position: 0
>          [    44.007] (II) ws: /dev/wsmouse0: maximum x position: 2559
>          [    44.007] (II) ws: /dev/wsmouse0: minimum y position: 0
>          [    44.007] (II) ws: /dev/wsmouse0: maximum y position: 1439
>          [    44.007] (==) ws: /dev/wsmouse0: Buttons: 7
>          [    44.011] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
>          [    44.011] (II) XINPUT: Adding extended input device
> "/dev/wsmouse0" (type: MOUSE, id 7)
>          [    44.448] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
>          [    44.448] (**) /dev/wsmouse0: (accel) acceleration profile 0
>          [    44.448] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
>          [    44.448] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
>          [    44.451] (II) config/wscons: checking input device /dev/wsmouse
>          [    44.451] (II) Using input driver 'ws' for '/dev/wsmouse'
>          [    44.451] (**) /dev/wsmouse: always reports core events
>          [    44.451] (II) ws: /dev/wsmouse: debuglevel 0
>          [    44.451] (**) Option "Device" "/dev/wsmouse"
>          [    44.451] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
>          [    44.451] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
>          [    44.451] (**) ws: /dev/wsmouse: associated screen: 0
>          [    44.451] (II) ws: /dev/wsmouse: minimum x position: 0
>          [    44.451] (II) ws: /dev/wsmouse: maximum x position: 2559
>          [    44.451] (II) ws: /dev/wsmouse: minimum y position: 0
>          [    44.451] (II) ws: /dev/wsmouse: maximum y position: 1439
>          [    44.451] (==) ws: /dev/wsmouse: Buttons: 7
>          [    44.452] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
>          [    44.452] (II) XINPUT: Adding extended input device
> "/dev/wsmouse" (type: MOUSE, id 8)
>          [    44.453] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
>          [    44.453] (**) /dev/wsmouse: (accel) acceleration profile 0
>          [    44.453] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
>          [    44.453] (**) /dev/wsmouse: (accel) acceleration threshold: 4
>          [    80.770] (II) intel(0): resizing framebuffer to 5120x1440
>          [    80.817] (II) intel(0): switch to mode 2560x1440@60.0 on
> HDMI1 using pipe 1, position (2560, 0), rotation normal, reflection
> none
>

Reply | Threaded
Open this post in threaded view
|

Re: Fan spinning constantly on Lenovo X1C and 6.6

Dumitru Moldovan-2
In reply to this post by Josh-106
On Wed, Oct 23, 2019 at 08:51:16AM +0200, Josh wrote:
>
>After upgrading from 6.5 to 6.6 following the procedure [1], my Lenovo
>X1C 6G is getting hot all the time.
>Fan is constantly spinning at 4000+rpm even even if its just editing a
>note in zim.
>If I let the laptop idling, it will take quite some time for the fan
>to stop even if there is no high cpu usage processes (showing top CS
>processes).

Perhaps stating the obvious, but have you tried starting Firefox in safe
mode?  Or even with a fresh profile?

I have two Firefox profiles that work just fine with 69.0.2 after
upgrading to OpenBSD 6.6, but you never know...  One of my profiles is
quite old, have used it over the years in four OS'es (Linux, FreeBSD,
OpenBSD, NetBSD).  Could not have done it without weekly backups, which
allowed me to restore a sane profile when Firefox went beserk, which
happened a few times.

Reply | Threaded
Open this post in threaded view
|

Re: Fan spinning constantly on Lenovo X1C and 6.6

Alessandro Gallo
I can't speak for Josh, but I'm on a fresh install. What's strange is that for the fan to come back to normal noise levels I have to put the laptop to sleep with zzz, otherwise it just keeps spinning at full speed.

Il 28 ottobre 2019 09:22:25 CET, Dumitru Moldovan <[hidden email]> ha scritto:

>On Wed, Oct 23, 2019 at 08:51:16AM +0200, Josh wrote:
>>
>>After upgrading from 6.5 to 6.6 following the procedure [1], my Lenovo
>>X1C 6G is getting hot all the time.
>>Fan is constantly spinning at 4000+rpm even even if its just editing a
>>note in zim.
>>If I let the laptop idling, it will take quite some time for the fan
>>to stop even if there is no high cpu usage processes (showing top CS
>>processes).
>
>Perhaps stating the obvious, but have you tried starting Firefox in
>safe
>mode?  Or even with a fresh profile?
>
>I have two Firefox profiles that work just fine with 69.0.2 after
>upgrading to OpenBSD 6.6, but you never know...  One of my profiles is
>quite old, have used it over the years in four OS'es (Linux, FreeBSD,
>OpenBSD, NetBSD).  Could not have done it without weekly backups, which
>allowed me to restore a sane profile when Firefox went beserk, which
>happened a few times.

--
Thanks
Reply | Threaded
Open this post in threaded view
|

Re: Fan spinning constantly on Lenovo X1C and 6.6

Josh-106
Thanks Alessandro and Dumitru for your replies.

I am not using Firefox. Just Chrome with the unveil setting. I thought
at first it was linked to the browser but the fan will keep spinning
even if I do not use any browsers.
For instance, using Zim, homebank, terminal with vim editing or mutt,
it will just spin at 4000+rpm even if the CPU shows a 50-52 degC. Fan
will only stop when <= 50 degC, when laptop is idling.

However, I have the same observation as Alessandro, putting the
computer to zzz and waking it up will stop the fan even if the cpu is
in the 50-60 degC range.

On Mon, Oct 28, 2019 at 9:47 AM Alessandro Gallo
<[hidden email]> wrote:

>
> I can't speak for Josh, but I'm on a fresh install. What's strange is that for the fan to come back to normal noise levels I have to put the laptop to sleep with zzz, otherwise it just keeps spinning at full speed.
>
> Il 28 ottobre 2019 09:22:25 CET, Dumitru Moldovan <[hidden email]> ha scritto:
>>
>> On Wed, Oct 23, 2019 at 08:51:16AM +0200, Josh wrote:
>>>
>>>
>>> After upgrading from 6.5 to 6.6 following the procedure [1], my Lenovo
>>> X1C 6G is getting hot all the time.
>>> Fan is constantly spinning at 4000+rpm even even if its just editing a
>>> note in zim.
>>> If I let the laptop idling, it will take quite some time for the fan
>>> to stop even if there is no high cpu usage processes (showing top CS
>>> processes).
>>
>>
>> Perhaps stating the obvious, but have you tried starting Firefox in safe
>> mode?  Or even with a fresh profile?
>>
>> I have two Firefox profiles that work just fine with 69.0.2 after
>> upgrading to OpenBSD 6.6, but you never know...  One of my profiles is
>> quite old, have used it over the years in four OS'es (Linux, FreeBSD,
>> OpenBSD, NetBSD).  Could not have done it without weekly backups, which
>> allowed me to restore a sane profile when Firefox went beserk, which
>> happened a few times.
>>
>
> --
> Thanks

Reply | Threaded
Open this post in threaded view
|

Re: Fan spinning constantly on Lenovo X1C and 6.6

Jay Williams
I'm running an X220 myself, and I noticed that the fan was constantly running
since upgrading from 6.5 to 6.6. I figured it was just Firefox being a hog, but
it does it even when Firefox isn't running, but after seeing this thread, I'm
thinking there must be some other reason.

--
Jay Williams