Error -14 from sane-backends, pixma

classic Classic list List threaded Threaded
1 message Options
M P
Reply | Threaded
Open this post in threaded view
|

Error -14 from sane-backends, pixma

M P
Hi,

I'm having no success to scan negative film on my Canoscan 9000F Mark
II. I'm using OpenBSD 6.4 stable, sane-backends 1.0.27p3, and xsane
0.999p4.

http://www.sane-project.org/sane-mfgs.html says that support for this
scanner is "complete". The scanner works fine on Mac OS X.

The scanimage command successfully recognizes the scanner then
gives me "[pixma] BUG: unmapped error -14".

Details are below.

Thanks for your help.

Marc.

$ usbdevs -v -d /dev/usb0 -a 4
addr 04: 04a9:190d Canon, CanoScan
     high speed, self powered, config 1, rev 0.02
     driver: ugen1
$ ls -l /dev/ugen1.* /dev/usb0
crw-rw----  1 root  _saned   63,  16 Oct 18 21:31 /dev/ugen1.00
crw-rw----  1 root  _saned   63,  17 Oct 18 21:31 /dev/ugen1.01
crw-rw----  1 root  _saned   63,  18 Oct 18 21:31 /dev/ugen1.02
crw-rw----  1 root  _saned   63,  19 Oct 18 21:31 /dev/ugen1.03
crw-rw----  1 root  _saned   63,  20 Oct 18 21:31 /dev/ugen1.04
crw-rw----  1 root  _saned   63,  21 Oct 18 21:31 /dev/ugen1.05
crw-rw----  1 root  _saned   63,  22 Oct 18 21:31 /dev/ugen1.06
crw-rw----  1 root  _saned   63,  23 Nov 21 19:54 /dev/ugen1.07
crw-rw----  1 root  _saned   63,  24 Oct 18 21:31 /dev/ugen1.08
crw-rw----  1 root  _saned   63,  25 Oct 18 21:31 /dev/ugen1.09
crw-rw----  1 root  _saned   63,  26 Oct 18 21:31 /dev/ugen1.10
crw-rw----  1 root  _saned   63,  27 Oct 18 21:31 /dev/ugen1.11
crw-rw----  1 root  _saned   63,  28 Oct 18 21:31 /dev/ugen1.12
crw-rw----  1 root  _saned   63,  29 Oct 18 21:31 /dev/ugen1.13
crw-rw----  1 root  _saned   63,  30 Oct 18 21:31 /dev/ugen1.14
crw-rw----  1 root  _saned   63,  31 Oct 18 21:31 /dev/ugen1.15
crw-rw----  1 root  _saned   61,   0 Oct 18 21:31 /dev/usb0
$ groups
marc wheel _saned
$ scanimage -L
device `pixma:04A9190D' is a CANON Canoscan 9000F Mark II
multi-function peripheral
$ SANE_DEBUG_PIXMA=4 scanimage -v -T
[sanei_debug] Setting debug level of pixma to 4.
[pixma] pixma is compiled with pthread support.
[pixma] pixma version 0.17.37
[pixma] pixma_collect_devices() found Canoscan 9000F Mark II at
libusb:000:004
[pixma] WARNING:No serial number
[pixma] pixma_find_scanners() found 1 devices
[pixma] pixma_collect_devices() found Canoscan 9000F Mark II at
libusb:000:004
[pixma] WARNING:No serial number
[pixma] pixma_open(): Canoscan 9000F Mark II
[pixma] Reader task started
[pixma]
[pixma] pixma_scan(): start
[pixma]   line_size=1914 image_size=1678578 channels=3 depth=8
[pixma]   dpi=75x75 offset=(0,0) dimension=638x877
[pixma]   gamma_table=0x151b98b60a38 source=0
[pixma]   threshold=127 threshold_curve=0
[pixma]   adf-wait=0
[pixma]   ADF page count: 0
[pixma] Reader task id=23210381893184 (threaded)
scanimage: scanning image of size 638x877 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1914 bytes...    [pixma] Current
status: paper=0 cal=0 lamp=0 busy=0
[pixma] Current status: paper=0 cal=0 lamp=0 busy=0
[pixma] Current status: paper=0 cal=0 lamp=0 busy=0
[pixma] Lamp status: 3 , timeout in: 19
[pixma] pixma_read_image() failed EEOF
[pixma] [pixma] read_image():reader task closed the pipe:0 bytes
received, 1678578 bytes expected
Reader task terminated: EEOF
[pixma] BUG: unmapped error -14
FAIL Error: Error during device I/O
[pixma] pixma_close(): Canoscan 9000F Mark II