Downgrade 6.6 to 6.5

classic Classic list List threaded Threaded
13 messages Options
Reply | Threaded
Open this post in threaded view
|

Downgrade 6.6 to 6.5

Josh-106
hi,

I've upgraded from 6.5 to 6.6 on my X1 6G and since then, I am unable
to find the reason(s) of the high fan spinning.
Is there a procedure to downgrade to 6.5 or should I just reinstall
from scratch?

thank you

prx
Reply | Threaded
Open this post in threaded view
|

Re: Downgrade 6.6 to 6.5

prx
Hi,
no and yes, I fear.

Le November 3, 2019 2:41:33 PM UTC, Josh <[hidden email]> a écrit :
>hi,
>
>I've upgraded from 6.5 to 6.6 on my X1 6G and since then, I am unable
>to find the reason(s) of the high fan spinning.
>Is there a procedure to downgrade to 6.5 or should I just reinstall
>from scratch?
>
>thank you

--
Envoyé de mon appareil Android avec Courriel Librem Mail. Veuillez excuser ma brièveté.
Reply | Threaded
Open this post in threaded view
|

Re: Downgrade 6.6 to 6.5

Otto Moerbeek
In reply to this post by Josh-106
On Sun, Nov 03, 2019 at 03:41:33PM +0100, Josh wrote:

> hi,
>
> I've upgraded from 6.5 to 6.6 on my X1 6G and since then, I am unable
> to find the reason(s) of the high fan spinning.
> Is there a procedure to downgrade to 6.5 or should I just reinstall
> from scratch?
>
> thank you
>

Did you spend any time to send a report to maybe get your problem
analyzed and fixed?

        -Otto

Reply | Threaded
Open this post in threaded view
|

Re: Downgrade 6.6 to 6.5

Raymond, David
In reply to this post by Josh-106
I had the fan problem on an X1 5G running linux, but a bios upgrade solved it.

Dave Raymond

On 11/3/19, Josh <[hidden email]> wrote:

> hi,
>
> I've upgraded from 6.5 to 6.6 on my X1 6G and since then, I am unable
> to find the reason(s) of the high fan spinning.
> Is there a procedure to downgrade to 6.5 or should I just reinstall
> from scratch?
>
> thank you
>
>


--
David J. Raymond
[hidden email]
http://physics.nmt.edu/~raymond

Reply | Threaded
Open this post in threaded view
|

Re: Downgrade 6.6 to 6.5

Josh-106
In reply to this post by Otto Moerbeek
I did not sent a bug report per say. Just this:
http://openbsd-archive.7691.n7.nabble.com/Fan-spinning-constantly-on-Lenovo-X1C-and-6-6-td375687.html

I upgraded to -current #427 and it seems to be better. I will spend
more time with it before I draw any conclusions.


thanks


On Sun, Nov 3, 2019 at 8:52 PM Otto Moerbeek <[hidden email]> wrote:

>
> On Sun, Nov 03, 2019 at 03:41:33PM +0100, Josh wrote:
>
> > hi,
> >
> > I've upgraded from 6.5 to 6.6 on my X1 6G and since then, I am unable
> > to find the reason(s) of the high fan spinning.
> > Is there a procedure to downgrade to 6.5 or should I just reinstall
> > from scratch?
> >
> > thank you
> >
>
> Did you spend any time to send a report to maybe get your problem
> analyzed and fixed?
>
>         -Otto

Reply | Threaded
Open this post in threaded view
|

Re: Downgrade 6.6 to 6.5

Josh-106
In reply to this post by Raymond, David
Hi Dave,
was it related to the Sx bios functionalities?

On Sun, Nov 3, 2019 at 11:20 PM Raymond, David <[hidden email]> wrote:

>
> I had the fan problem on an X1 5G running linux, but a bios upgrade solved it.
>
> Dave Raymond
>
> On 11/3/19, Josh <[hidden email]> wrote:
> > hi,
> >
> > I've upgraded from 6.5 to 6.6 on my X1 6G and since then, I am unable
> > to find the reason(s) of the high fan spinning.
> > Is there a procedure to downgrade to 6.5 or should I just reinstall
> > from scratch?
> >
> > thank you
> >
> >
>
>
> --
> David J. Raymond
> [hidden email]
> http://physics.nmt.edu/~raymond

Reply | Threaded
Open this post in threaded view
|

Re: Downgrade 6.6 to 6.5

Raymond, David
Josh,

I don't recall, as it was a while ago.  I had read somewhere that
upgrading the bios solved the problem of a fan running continuously on
the X1 5G.  I was running Arch Linux at the time, but at some point I
intend to put OpenBSD on this laptop.  I'll see what happens.

Dave

On 11/4/19, Josh <[hidden email]> wrote:

> Hi Dave,
> was it related to the Sx bios functionalities?
>
> On Sun, Nov 3, 2019 at 11:20 PM Raymond, David <[hidden email]>
> wrote:
>>
>> I had the fan problem on an X1 5G running linux, but a bios upgrade solved
>> it.
>>
>> Dave Raymond
>>
>> On 11/3/19, Josh <[hidden email]> wrote:
>> > hi,
>> >
>> > I've upgraded from 6.5 to 6.6 on my X1 6G and since then, I am unable
>> > to find the reason(s) of the high fan spinning.
>> > Is there a procedure to downgrade to 6.5 or should I just reinstall
>> > from scratch?
>> >
>> > thank you
>> >
>> >
>>
>>
>> --
>> David J. Raymond
>> [hidden email]
>> http://physics.nmt.edu/~raymond
>


--
David J. Raymond
[hidden email]
http://physics.nmt.edu/~raymond

Reply | Threaded
Open this post in threaded view
|

Re: Downgrade 6.6 to 6.5

Josh-106
In reply to this post by Josh-106
Snapshot -current #427 did not solve the problem after all.
so after much testing with bios options, disabling the intel
acceleration and even the chrome "hardware acceleration", nothing
seems to stop the fan from spinning. It will take a good 5min for the
fan to stop when computer is idling (activity of 96-98% idling, using
top CS). If I do a zzz like after one minute of idling and wake it
right after, the fan just stops. CPU temp remains the same as before
the zzz.

Not sure what to do next, I believe this could be reproduced on any X1
6G... Just install 6.6, log through xenodm, launch Chrome, heavy
programs to start the FAN spinning then idle the laptop and see how
long it takes for the fan to stop.
You should also be able to reproduce the other behaviour: when cpu
temp is 55-60degC and fan spinning, you can zzz and wake it right
away, fan remains stopped (as long as you don't do cpu intense tasks
upon awake)

would a "sendbug" be helpful?


On Sun, Nov 3, 2019 at 3:41 PM Josh <[hidden email]> wrote:
>
> hi,
>
> I've upgraded from 6.5 to 6.6 on my X1 6G and since then, I am unable
> to find the reason(s) of the high fan spinning.
> Is there a procedure to downgrade to 6.5 or should I just reinstall
> from scratch?
>
> thank you

Reply | Threaded
Open this post in threaded view
|

Re: Downgrade 6.6 to 6.5

Jay Hart-2
Running the latest BIOS firmware???

Jay

> Snapshot -current #427 did not solve the problem after all.
> so after much testing with bios options, disabling the intel
> acceleration and even the chrome "hardware acceleration", nothing
> seems to stop the fan from spinning. It will take a good 5min for the
> fan to stop when computer is idling (activity of 96-98% idling, using
> top CS). If I do a zzz like after one minute of idling and wake it
> right after, the fan just stops. CPU temp remains the same as before
> the zzz.
>
> Not sure what to do next, I believe this could be reproduced on any X1
> 6G... Just install 6.6, log through xenodm, launch Chrome, heavy
> programs to start the FAN spinning then idle the laptop and see how
> long it takes for the fan to stop.
> You should also be able to reproduce the other behaviour: when cpu
> temp is 55-60degC and fan spinning, you can zzz and wake it right
> away, fan remains stopped (as long as you don't do cpu intense tasks
> upon awake)
>
> would a "sendbug" be helpful?
>
>
> On Sun, Nov 3, 2019 at 3:41 PM Josh <[hidden email]> wrote:
>>
>> hi,
>>
>> I've upgraded from 6.5 to 6.6 on my X1 6G and since then, I am unable
>> to find the reason(s) of the high fan spinning.
>> Is there a procedure to downgrade to 6.5 or should I just reinstall
>> from scratch?
>>
>> thank you
>
>


Reply | Threaded
Open this post in threaded view
|

Re: Downgrade 6.6 to 6.5

Josh-106
yep, 1.41

OpenBSD 6.6-current (GENERIC.MP) #427: Sat Nov  2 13:23:11 MDT 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16896442368 (16113MB)
avail mem = 16371654656 (15613MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x9f04a000 (63 entries)
bios0: vendor LENOVO version "N23ET66W (1.41 )" date 09/02/2019
bios0: LENOVO 20KHCTO1WW
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT UEFI SSDT SSDT HPET APIC MCFG ECDT SSDT
SSDT BOOT BATB SSDT SSDT SSDT LPIT WSMT SSDT SSDT SSDT DBGP DBG2 MSDM
DMAR NHLT ASF! FPDT UEFI
acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4)
PXSX(S4) RP02(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4)
PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 1789.52 MHz, 06-8e-0a
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 1789.04 MHz, 06-8e-0a
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 1788.48 MHz, 06-8e-0a
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 1790.06 MHz, 06-8e-0a
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf0000000, bus 0-127
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 4 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus 5 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus -1 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHC_
acpitz0 at acpi0: critical temperature is 128 degC
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpithinkpad0 at acpi0: version 2.0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "01AV430" serial  2745 type LiP oem "SMP"
"LEN0100" at acpi0 not configured
"INT3403" at acpi0 not configured
acpicmos0 at acpi0
"ALPS0000" at acpi0 not configured
"INT0E0C" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT3400" at acpi0 not configured
"USBC000" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1789 MHz: speeds: 2101, 2100, 1900, 1800,
1700, 1600, 1500, 1400, 1200, 1100, 1000, 800, 700, 600, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x08
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 620" rev 0x07
drm0 at inteldrm0
inteldrm0: msi
"Intel Core 6G Thermal" rev 0x08 at pci0 dev 4 function 0 not configured
"Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 100 Series KT" rev 0x21: ports: 16 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 2
iwm0 at pci1 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev 0x78, msi
ppb1 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 4
nvme0 at pci2 dev 0 function 0 "SanDisk WD Black NVMe" rev 0x00: msix, NVMe 1.3
nvme0: WDC PC SN720 SDAQNTW-512G-1001, firmware 10170101, serial 184851804078
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, WDC PC SN720 SDA, 1017>
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors
ppb2 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 5
pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
apic 2 int 16
iic0 at ichiic0
em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address
e8:6a:64:ea:ac:2c
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.16, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/24.07 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 1 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/24.07 addr 2
uhidev1: iclass 3/1, 8 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 8: input=1, output=0, feature=0
uhidev2 at uhub0 port 1 configuration 1 interface 2 "Logitech USB
Receiver" rev 2.00/24.07 addr 2
uhidev2: iclass 3/0, 33 report ids
uhid3 at uhidev2 reportid 16: input=6, output=6, feature=0
uhid4 at uhidev2 reportid 17: input=19, output=19, feature=0
uhid5 at uhidev2 reportid 32: input=14, output=14, feature=0
uhid6 at uhidev2 reportid 33: input=31, output=31, feature=0
uhidev3 at uhub0 port 2 configuration 1 interface 0 "Yubico Yubikey
NEO OTP+U2F" rev 2.00/3.43 addr 3
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
uhidev4 at uhub0 port 2 configuration 1 interface 1 "Yubico Yubikey
NEO OTP+U2F" rev 2.00/3.43 addr 3
uhidev4: iclass 3/0
uhid7 at uhidev4: input=64, output=64, feature=0
uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT Inc
Integrated Camera" rev 2.01/17.11 addr 4
video0 at uvideo0
umass0 at uhub0 port 15 configuration 1 interface 0 "Generic
USB3.0-CRW" rev 3.00/29.08 addr 5
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC CRW, 1.00> removable
serial.0bda0328008282014000
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd2: 488385MB, 512 bytes/sector, 1000213601 sectors
root on sd2a (2a9a4953b9283bc0.a) swap on sd2b dump on sd2b
inteldrm0: 2560x1440, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x230, fw ver 22.391740.0, address 04:ea:56:4e:d2:7f

usbdevs:
Controller /dev/usb0:
addr 01: 8086:0000 Intel, xHCI root hub
super speed, self powered, config 1, rev 1.00
driver: uhub0
addr 02: 046d:c52b Logitech, USB Receiver
full speed, power 98 mA, config 1, rev 24.07
driver: uhidev0
driver: uhidev1
driver: uhidev2
addr 04: 13d3:56b2 SunplusIT Inc, Integrated Camera
high speed, power 500 mA, config 1, rev 17.11
driver: uvideo0
addr 05: 0bda:0328 Generic, USB3.0-CRW
super speed, power 200 mA, config 1, rev 29.08, iSerial 28203008282014000
driver: umass0

pcidump:
Domain /dev/pci0:
 0:0:0: Intel Core 8G Host
0x0000: Vendor ID: 8086, Product ID: 5914
0x0004: Command: 0006, Status: 2090
0x0008: Class: 06 Bridge, Subclass: 00 Host,
Interface: 00, Revision: 08
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x00e0: Capability 0x09: Vendor Specific
0x0000: 59148086 20900006 06000008 00000000
0x0010: 00000000 00000000 00000000 00000000
0x0020: 00000000 00000000 00000000 225c17aa
0x0030: 00000000 000000e0 00000000 00000000
0x0040: fed19001 00000000 fed10001 00000000
0x0050: 000001c1 000080b1 ac700047 a90000a7
0x0060: f0000003 00000000 fed18001 00000000
0x0070: fe000000 00000003 fe000c00 0000007f
0x0080: 11111110 00111111 0000001a 00000000
0x0090: fe000001 00000003 51700001 00000004
0x00a0: 00000001 00000004 51800001 00000004
0x00b0: aa800001 aa000001 a9000001 ac800001
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 00000000 00000000 00000000 00000000
0x00e0: 01100009 7a616081 161580dc 0004c000
0x00f0: 00000000 000a0fc8 00000000 00000000
 0:2:0: Intel UHD Graphics 620
0x0000: Vendor ID: 8086, Product ID: 5917
0x0004: Command: 0007, Status: 0010
0x0008: Class: 03 Display, Subclass: 00 VGA,
Interface: 00, Revision: 07
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000002ffe000000/0x01000000
0x0018: BAR mem prefetchable 64bit addr: 0x00000000c0000000/0x20000000
0x0020: BAR io addr: 0x0000e000/0x0040
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x09: Vendor Specific
0x0070: Capability 0x10: PCI Express
0x0100: Enhanced Capability 0x1b: Process Address Space ID
0x0200: Enhanced Capability 0x0f: Address Translation Services
0x0300: Enhanced Capability 0x13: Page Request Interface
0x00ac: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x00d0: Capability 0x01: Power Management
State: D0
0x0000: 59178086 00100007 03000007 00000000
0x0010: fe000004 0000002f c000000c 00000000
0x0020: 0000e001 00000000 00000000 225c17aa
0x0030: 00000000 00000040 00000000 0000010b
0x0040: 010c7009 7a616081 161580dc 00000000
0x0050: 000001c1 000080b1 00000000 aa800001
0x0060: 00030000 00000000 00000000 00000000
0x0070: 0092ac10 10008000 00000000 00000000
0x0080: 00000000 00000000 00000000 00000000
0x0090: 00000000 00000000 00000000 00000000
0x00a0: 00000000 00000000 00000000 0001d005
0x00b0: fee00000 00000091 00000000 00000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 00220001 00000000 00000000 00000000
0x00e0: 00000000 00000001 00008000 00000000
0x00f0: 00000000 00000000 00000000 9ff58018
 0:4:0: Intel Core 6G Thermal
0x0000: Vendor ID: 8086, Product ID: 1903
0x0004: Command: 0000, Status: 0090
0x0008: Class: 11 DASP, Subclass: 80 Miscellaneous,
Interface: 00, Revision: 08
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000002fff010000/0x00008000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0090: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x00d0: Capability 0x01: Power Management
State: D0
0x00e0: Capability 0x09: Vendor Specific
0x0000: 19038086 00900000 11800008 00000000
0x0010: ff010004 0000002f 00000000 00000000
0x0020: 00000000 00000000 00000000 225c17aa
0x0030: 00000000 00000090 00000000 000001ff
0x0040: 00000000 00000000 00000000 00000000
0x0050: 00000000 000080b1 00000000 00000000
0x0060: 00000000 00000000 00000000 00000000
0x0070: 00000000 00000000 00000000 00000000
0x0080: 00000000 00000000 00000000 00000000
0x0090: 0000d005 00000000 00000000 00000000
0x00a0: 00000000 00000000 00000000 00000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 0003e001 00000008 00000000 00000000
0x00e0: 010c0009 7a616081 161580dc 00000000
0x00f0: 00000000 00000000 00000000 00000000
 0:8:0: Intel Core GMM
0x0000: Vendor ID: 8086, Product ID: 1911
0x0004: Command: 0000, Status: 0010
0x0008: Class: 08 System, Subclass: 80 Miscellaneous,
Interface: 00, Revision: 00
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000002fff01f000/0x00001000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0090: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x00dc: Capability 0x01: Power Management
State: D0
0x00f0: Capability 0x13: PCI Advanced Features
0x0000: 19118086 00100000 08800000 00000000
0x0010: ff01f004 0000002f 00000000 00000000
0x0020: 00000000 00000000 00000000 225c17aa
0x0030: 00000000 00000090 00000000 000001ff
0x0040: 000001ff 00000000 00000000 00000000
0x0050: 00000000 00000000 00000000 00000000
0x0060: 00000000 00000000 00000000 00000000
0x0070: 00000000 00000000 00000000 00000000
0x0080: 00000000 00000000 00000000 00000000
0x0090: 0000dc05 00000000 00000000 00000000
0x00a0: 00000000 00000000 00000000 00000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 00000000 00000000 00000000 0002f001
0x00e0: 00000000 00000000 00000000 00000000
0x00f0: 03060013 00000000 00000000 00000000
 0:20:0: Intel 100 Series xHCI
0x0000: Vendor ID: 8086, Product ID: 9d2f
0x0004: Command: 0006, Status: 0290
0x0008: Class: 0c Serial Bus, Subclass: 03 USB,
Interface: 30, Revision: 21
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000e0420000/0x00010000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0070: Capability 0x01: Power Management
State: D0
0x0080: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0000: 9d2f8086 02900006 0c033021 00800000
0x0010: e0420004 00000000 00000000 00000000
0x0020: 00000000 00000000 00000000 225c17aa
0x0030: 00000000 00000070 00000000 000001ff
0x0040: 803401fd 800fc688 00000000 00000000
0x0050: 0fce6e5b 00000000 00000000 00000000
0x0060: 00006030 00000000 00000000 00000000
0x0070: c1c28001 00000008 00000000 00000000
0x0080: 00870005 fee00000 00000000 00000060
0x0090: f0140009 01400010 00000000 00080ac1
0x00a0: 00000800 00001800 0002408f 00040100
0x00b0: 00000001 00000002 00000000 00000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 00000001 00000002 00000000 00000000
0x00e0: 00000000 00000000 00000000 00000000
0x00f0: 00000000 00000000 08410fb3 00000000
 0:20:2: Intel 100 Series Thermal
0x0000: Vendor ID: 8086, Product ID: 9d31
0x0004: Command: 0006, Status: 0010
0x0008: Class: 11 DASP, Subclass: 80 Miscellaneous,
Interface: 00, Revision: 21
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000002fff01e000/0x00001000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 03 Line: ff Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x0080: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x0000: 9d318086 00100006 11800021 00000000
0x0010: ff01e004 0000002f 00000000 00000000
0x0020: 00000000 00000000 00000000 225c17aa
0x0030: 00000000 00000050 00000000 000003ff
0x0040: 00000004 00000000 00000000 00000000
0x0050: 00238001 00000008 00000000 00000000
0x0060: 00000000 00000000 00000000 00000000
0x0070: 00000000 00000000 00000000 00000000
0x0080: 00000005 00000000 00000000 00000000
0x0090: 00000000 00000000 00000000 00000000
0x00a0: 00000000 00000000 00000000 00000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 00000000 00000000 00000000 00000000
0x00e0: 00000000 00000000 00000000 00000000
0x00f0: 00000000 00000000 08410fb3 00000000
 0:22:0: Intel 100 Series MEI
0x0000: Vendor ID: 8086, Product ID: 9d3a
0x0004: Command: 0004, Status: 0010
0x0008: Class: 07 Communications, Subclass: 80 Miscellaneous,
Interface: 00, Revision: 21
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000002fff01d000/0x00001000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x008c: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x0000: 9d3a8086 00100004 07800021 00800000
0x0010: ff01d004 0000002f 00000000 00000000
0x0020: 00000000 00000000 00000000 225c17aa
0x0030: 00000000 00000050 00000000 000001ff
0x0040: 94000245 80010020 80108106 00000000
0x0050: 40038c01 00000008 00000000 00000000
0x0060: 00000030 00a84000 00001f01 44400ac9
0x0070: 00000000 00000000 00000000 00000000
0x0080: 00000000 00000000 00000000 00800005
0x0090: 00000000 00000000 00000000 00000000
0x00a0: 00000000 00000000 00000000 00000000
0x00b0: 00000000 00000000 00000000 40000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 00000000 00000000 00000000 00000000
0x00e0: 00000000 00000000 00000000 00000000
0x00f0: 00000000 00000000 08410fb3 00000000
 0:22:3: Intel 100 Series KT
0x0000: Vendor ID: 8086, Product ID: 9d3d
0x0004: Command: 0007, Status: 00b0
0x0008: Class: 07 Communications, Subclass: 00 Serial,
Interface: 02, Revision: 21
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR io addr: 0x0000e060/0x0008
0x0014: BAR mem 32bit addr: 0xe0434000/0x00001000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 04 Line: ff Min Gnt: 00 Max Lat: 00
0x0040: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x0050: Capability 0x01: Power Management
State: D0
0x0000: 9d3d8086 00b00007 07000221 00800000
0x0010: 0000e061 e0434000 00000000 00000000
0x0020: 00000000 00000000 00000000 225c17aa
0x0030: 00000000 00000040 00000000 000004ff
0x0040: 00805005 00000000 00000000 00000000
0x0050: 00230001 00000008 00000000 00000000
0x0060: 00000000 00000000 00000000 00000000
0x0070: 00000000 00000000 00000000 00000000
0x0080: 00000000 00000000 00000000 00000000
0x0090: 00000000 00000000 00000000 00000000
0x00a0: 00000000 00000000 00000000 00000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 00000000 00000000 00000000 00000000
0x00e0: 00000000 00000000 00000000 00000000
0x00f0: 00000000 00000000 08410fb3 00000000
 0:28:0: Intel 100 Series PCIE
0x0000: Vendor ID: 8086, Product ID: 9d10
0x0004: Command: 0007, Status: 0010
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: f1
0x000c: BIST: 00, Header Type: 81, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: Primary Bus: 0, Secondary Bus: 2, Subordinate Bus: 2,
Secondary Latency Timer: 00
0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000
0x0020: Memory Base: e030, Memory Limit: e030
0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 8.0 GT/s, Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0140: Enhanced Capability 0x0d: Access Control Services
0x0200: Enhanced Capability 0x1e: L1 PM
0x0220: Enhanced Capability 0x19: Secondary PCIe Capability
0x0080: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0x0000: 9d108086 00100007 060400f1 00810000
0x0010: 00000000 00000000 00020200 200000f0
0x0020: e030e030 0001fff1 ffffffff 00000000
0x0030: 00000000 00000040 00000000 000001ff
0x0040: 01428010 00008001 00100000 01724c13
0x0050: 70110042 0004b200 00480028 00000000
0x0060: 00000000 00000837 00000400 0000000e
0x0070: 00010003 00000000 00000000 00000000
0x0080: 00019005 fee00000 00000061 00000000
0x0090: 0000a00d 225c17aa 00000000 00000000
0x00a0: c8030001 00000000 00000000 00000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 07001001 00001842 899e0008 00000000
0x00e0: 0073f700 88aa88aa 00128016 00000000
0x00f0: 00000150 40000300 08410fb3 01000004
 0:28:4: Intel 100 Series PCIE
0x0000: Vendor ID: 8086, Product ID: 9d14
0x0004: Command: 0007, Status: 0010
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: f1
0x000c: BIST: 00, Header Type: 81, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: Primary Bus: 0, Secondary Bus: 4, Subordinate Bus: 4,
Secondary Latency Timer: 00
0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000
0x0020: Memory Base: e020, Memory Limit: e020
0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000
0x0040: Capability 0x10: PCI Express
Link Speed: 5.0 / 8.0 GT/s, Link Width: x4 / x4
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0140: Enhanced Capability 0x0d: Access Control Services
0x0200: Enhanced Capability 0x1e: L1 PM
0x0220: Enhanced Capability 0x19: Secondary PCIe Capability
0x0080: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0x0000: 9d148086 00100007 060400f1 00810000
0x0010: 00000000 00000000 00040400 200000f0
0x0020: e020e020 0001fff1 ffffffff 00000000
0x0030: 00000000 00000040 00000000 000001ff
0x0040: 01428010 00008001 00100020 05724843
0x0050: 70430042 0024fd00 00400028 00000000
0x0060: 00000000 00000837 00000400 0000000e
0x0070: 001f0003 00000000 00000000 00000000
0x0080: 00019005 fee00000 00000062 00000000
0x0090: 0000a00d 225c17aa 00000000 00000000
0x00a0: c8030001 00000000 00000000 00000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 07001011 00001842 899e0008 00000000
0x00e0: 00f3f700 88458845 00128016 00000000
0x00f0: 00000150 40000300 08410fb3 0100c004
 0:29:0: Intel 100 Series PCIE
0x0000: Vendor ID: 8086, Product ID: 9d18
0x0004: Command: 0007, Status: 0010
0x0008: Class: 06 Bridge, Subclass: 04 PCI,
Interface: 00, Revision: f1
0x000c: BIST: 00, Header Type: 81, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: Primary Bus: 0, Secondary Bus: 5, Subordinate Bus: 111,
Secondary Latency Timer: 00
0x001c: I/O Base: f0, I/O Limit: 00, Secondary Status: 2000
0x0020: Memory Base: e000, Memory Limit: e010
0x0024: Prefetch Memory Base: fff1, Prefetch Memory Limit: 0001
0x0028: Prefetch Memory Base Upper 32 Bits: ffffffff
0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
0x0030: I/O Base Upper 16 Bits: 0000, I/O Limit Upper 16 Bits: 0000
0x0038: Expansion ROM Base Address: 00000000
0x003c: Interrupt Pin: 01, Line: ff, Bridge Control: 0000
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 8.0 GT/s, Link Width: x0 / x4
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0140: Enhanced Capability 0x0d: Access Control Services
0x0220: Enhanced Capability 0x19: Secondary PCIe Capability
0x0080: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0090: Capability 0x0d: PCI-PCI
0x00a0: Capability 0x01: Power Management
State: D0
0x0000: 9d188086 00100007 060400f1 00810000
0x0010: 00000000 00000000 006f0500 200000f0
0x0020: e010e000 0001fff1 ffffffff 00000000
0x0030: 00000000 00000040 00000000 000001ff
0x0040: 01428010 00008000 00100000 09727043
0x0050: 10010000 0044fd60 00000028 00000000
0x0060: 00000000 00000837 00000000 0000000e
0x0070: 00010003 00000000 00000000 00000000
0x0080: 00019005 fee00000 00000064 00000000
0x0090: 0000a00d 225c17aa 00000000 00000000
0x00a0: c8030001 00000000 00000000 00000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 07001001 00001842 899e0008 00000000
0x00e0: 0073f700 00000000 00128006 00000000
0x00f0: 00000150 40000300 08410fb3 0100c004
 0:31:0: Intel 200 Series LPC
0x0000: Vendor ID: 8086, Product ID: 9d4e
0x0004: Command: 0007, Status: 0200
0x0008: Class: 06 Bridge, Subclass: 01 ISA,
Interface: 00, Revision: 21
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR empty (00000000)
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x0000: 9d4e8086 02000007 06010021 00800000
0x0010: 00000000 00000000 00000000 00000000
0x0020: 00000000 00000000 00000000 225c17aa
0x0030: 00000000 00000000 00000000 00000000
0x0040: 00000000 00000000 00000000 00000000
0x0050: 00000000 00000000 00000000 00000000
0x0060: 00000000 00000090 00000000 00000000
0x0070: 00000000 00000000 00000000 00000000
0x0080: 3f0f0010 007c1601 000c15e1 000c0081
0x0090: 000c0681 00000f00 00000000 00000000
0x00a0: 00000000 00000000 00000000 00000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 00112233 00004567 0000ffcf 000000a2
0x00e0: 000000c1 00000000 00000000 00000000
0x00f0: 00000000 00000000 08410fb3 00000000
 0:31:2: Intel 100 Series PMC
0x0000: Vendor ID: 8086, Product ID: 9d21
0x0004: Command: 0000, Status: 0000
0x0008: Class: 05 Memory, Subclass: 80 Miscellaneous,
Interface: 00, Revision: 21
0x000c: BIST: 00, Header Type: 80, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xe0430000/0x00004000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
0x0000: 9d218086 00000000 05800021 00800000
0x0010: e0430000 00000000 00000000 00000000
0x0020: 00000000 00000000 00000000 225c17aa
0x0030: 00000000 00000000 00000000 00000000
0x0040: 00001801 00000180 fe000000 00000000
0x0050: 00000000 00000000 00000000 00000000
0x0060: 00000000 00000000 00000000 00000000
0x0070: 00000000 00000000 00000000 00000000
0x0080: 00000000 00000000 00000000 00000000
0x0090: 00000000 00000000 00000000 00000000
0x00a0: 988036f8 00073c39 00004600 81000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 00000000 00000000 00000000 00000000
0x00e0: 00000000 00000000 00000000 00000000
0x00f0: 00000000 00000000 08410fb3 00000000
 0:31:3: Intel 200 Series HD Audio
0x0000: Vendor ID: 8086, Product ID: 9d71
0x0004: Command: 0006, Status: 0010
0x0008: Class: 04 (unknown), Subclass: 03 (unknown),
Interface: 80, Revision: 21
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000002fff018000/0x00004000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR mem 64bit addr: 0x0000002fff000000/0x00010000
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0050: Capability 0x01: Power Management
State: D0
0x0060: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0000: 9d718086 00100006 04038021 00000000
0x0010: ff018004 0000002f 00000000 00000000
0x0020: ff000004 0000002f 00000000 225c17aa
0x0030: 00000000 00000050 00000000 000001ff
0x0040: 00000000 00000000 803b0dff 00000000
0x0050: c0436001 00000008 00000000 00000000
0x0060: 00810005 fee00000 00000000 000000b0
0x0070: 00910010 10000000 00102000 00000000
0x0080: 00000000 00000000 00000000 00000000
0x0090: 00000000 00000000 00000000 00000000
0x00a0: 00000000 00000000 00000000 00000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00020608 04807000 82a50c00 00030010
0x00d0: 02b50c00 00030010 00000000 00000000
0x00e0: 00000000 00000000 00000000 00000000
0x00f0: 00000000 00000000 08410fb3 00000000
 0:31:4: Intel 100 Series SMBus
0x0000: Vendor ID: 8086, Product ID: 9d23
0x0004: Command: 0001, Status: 0280
0x0008: Class: 0c Serial Bus, Subclass: 05 SMBus,
Interface: 00, Revision: 21
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x0000002fff01c000/0x00000100
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR io addr: 0x0000efa0/0x0020
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0000: 9d238086 02800001 0c050021 00000000
0x0010: ff01c004 0000002f 00000000 00000000
0x0020: 0000efa1 00000000 00000000 225c17aa
0x0030: 00000000 00000000 00000000 000001ff
0x0040: 00000011 00000000 00000000 00000000
0x0050: 00000401 00000101 00000000 00000000
0x0060: 00050504 0a0a0000 00000000 00000000
0x0070: 00000000 00000000 00000000 00000000
0x0080: 00040024 00000000 00000000 00000000
0x0090: 00000000 00000000 00000000 00000000
0x00a0: 00000000 00000000 00000000 00000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00000000 00000000 00000000 00000000
0x00d0: 00000000 00000000 00000000 00000000
0x00e0: 00000000 00000000 00000000 00000000
0x00f0: 00000000 00000000 08410fb3 00000000
 0:31:6: Intel I219-LM
0x0000: Vendor ID: 8086, Product ID: 15d7
0x0004: Command: 0006, Status: 0010
0x0008: Class: 02 Network, Subclass: 00 Ethernet,
Interface: 00, Revision: 21
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 32bit addr: 0xe0400000/0x00020000
0x0014: BAR empty (00000000)
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 17aa Product ID: 225c
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x00c8: Capability 0x01: Power Management
State: D0
0x00d0: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x00e0: Capability 0x13: PCI Advanced Features
0x0000: 15d78086 00100006 02000021 00000000
0x0010: e0400000 00000000 00000000 00000000
0x0020: 00000000 00000000 00000000 225c17aa
0x0030: 00000000 000000c8 00000000 000001ff
0x0040: 00000000 00000000 00000000 00000000
0x0050: 00000000 00000000 00000000 00000000
0x0060: 00000000 00000000 00000000 00000000
0x0070: 00000000 00000000 00000000 00000000
0x0080: 00000028 00000008 00000000 00000000
0x0090: 00000000 0000001f 00000000 58100240
0x00a0: 00000000 00000001 10031003 00000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00000000 00000000 c823d001 00002008
0x00d0: 0081e005 fee00000 00000000 00000073
0x00e0: 03060013 00000000 00000000 00000000
0x00f0: 00000000 00000000 00000000 00000000
 2:0:0: Intel Dual Band Wireless-AC 8265
0x0000: Vendor ID: 8086, Product ID: 24fd
0x0004: Command: 0006, Status: 0010
0x0008: Class: 02 Network, Subclass: 80 Miscellaneous,
Interface: 00, Revision: 78
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000e0300000/0x00002000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR empty (00000000)
0x0024: BAR empty (00000000)
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 8086 Product ID: 0010
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x00c8: Capability 0x01: Power Management
State: D0
0x00d0: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: yes
0x0040: Capability 0x10: PCI Express
Link Speed: 2.5 / 2.5 GT/s, Link Width: x1 / x1
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0140: Enhanced Capability 0x03: Device Serial Number
Serial Number: 04ea56ffff4ed27f
0x014c: Enhanced Capability 0x18: Latency Tolerance Reporting
0x0154: Enhanced Capability 0x1e: L1 PM
0x0000: 24fd8086 00100006 02800078 00000000
0x0010: e0300004 00000000 00000000 00000000
0x0020: 00000000 00000000 00000000 00108086
0x0030: 00000000 000000c8 00000000 000001ff
0x0040: 00020010 10008ec0 00190c10 0045e811
0x0050: 10110142 00000000 00000000 00000000
0x0060: 00000000 00080812 00000405 00000000
0x0070: 00010001 00000000 00000000 00000000
0x0080: 00000000 00000000 00000000 00000000
0x0090: 00000000 00000000 00000000 00000000
0x00a0: 00000000 00000000 00000000 00000000
0x00b0: 00000000 00000000 00000000 00000000
0x00c0: 00000000 00000000 c823d001 0d000000
0x00d0: 00814005 fee00000 00000000 00000072
0x00e0: 00000000 00000000 00000000 00000000
0x00f0: 00000000 00000000 00000000 00000000
 4:0:0: SanDisk WD Black NVMe
0x0000: Vendor ID: 15b7, Product ID: 5002
0x0004: Command: 0007, Status: 0010
0x0008: Class: 01 Mass Storage, Subclass: 08 NVM,
Interface: 02, Revision: 00
0x000c: BIST: 00, Header Type: 00, Latency Timer: 00,
Cache Line Size: 00
0x0010: BAR mem 64bit addr: 0x00000000e0200000/0x00004000
0x0018: BAR empty (00000000)
0x001c: BAR empty (00000000)
0x0020: BAR mem 64bit addr: 0x00000000e0204000/0x00000100
0x0028: Cardbus CIS: 00000000
0x002c: Subsystem Vendor ID: 15b7 Product ID: 5002
0x0030: Expansion ROM Base Address: 00000000
0x0038: 00000000
0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 00 Max Lat: 00
0x0080: Capability 0x01: Power Management
State: D0
0x0090: Capability 0x05: Message Signalled Interrupts (MSI)
Enabled: no
0x00b0: Capability 0x11: Extended Message Signalled Interrupts (MSI-X)
Enabled: yes; table size 33 (BAR 0:8192)
0x00c0: Capability 0x10: PCI Express
Link Speed: 5.0 / 8.0 GT/s, Link Width: x4 / x4
0x0100: Enhanced Capability 0x01: Advanced Error Reporting
0x0150: Enhanced Capability 0x03: Device Serial Number
Serial Number: 0000000000000000
0x01b8: Enhanced Capability 0x18: Latency Tolerance Reporting
0x0300: Enhanced Capability 0x19: Secondary PCIe Capability
0x0900: Enhanced Capability 0x1e: L1 PM
0x0000: 500215b7 00100007 01080200 00000000
0x0010: e0200004 00000000 00000000 00000000
0x0020: e0204004 00000000 00000000 500215b7
0x0030: 00000000 00000080 00000000 000001ff
0x0040: 00000000 00000000 00000000 00000000
0x0050: 00000000 00000000 00000000 00000000
0x0060: 00000000 00000000 00000000 00000000
0x0070: 00000000 00000000 00000000 00000000
0x0080: 00039001 00000008 00000000 00000000
0x0090: 008ab005 00000000 00000000 00000000
0x00a0: 00000000 00000000 00000000 00000000
0x00b0: 8020c011 00002000 00000004 00000000
0x00c0: 00020010 10008f02 00092830 0045a843
0x00d0: 10430142 00000000 00000000 00000000
0x00e0: 00000000 00100812 00000400 0000000e
0x00f0: 001e0003 00000000 00000000 00000000

X.log (using intel module)
[    42.582] (--) checkDevMem: using aperture driver /dev/xf86
[    42.645] (--) Using wscons driver on /dev/ttyC4
[    42.666]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[    42.666] Build Operating System: OpenBSD 6.6 amd64
[    42.666] Current Operating System: OpenBSD x1.none 6.6 GENERIC.MP#427 amd64
[    42.666] Build Date: 02 November 2019  01:48:53PM
[    42.666]
[    42.666] Current version of pixman: 0.38.4
[    42.666] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    42.666] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    42.667] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Nov  5
23:28:59 2019
[    42.668] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    42.668] (==) Using system config directory
"/usr/X11R6/share/X11/xorg.conf.d"
[    42.670] (==) No Layout section.  Using the first Screen section.
[    42.670] (==) No screen section available. Using defaults.
[    42.670] (**) |-->Screen "Default Screen Section" (0)
[    42.670] (**) |   |-->Monitor "<default monitor>"
[    42.671] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[    42.671] (**) |   |-->Device "drm"
[    42.671] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    42.671] (==) Automatically adding devices
[    42.671] (==) Automatically enabling devices
[    42.671] (==) Not automatically adding GPU devices
[    42.671] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    42.676] (==) FontPath set to:
/usr/X11R6/lib/X11/fonts/misc/,
/usr/X11R6/lib/X11/fonts/TTF/,
/usr/X11R6/lib/X11/fonts/OTF/,
/usr/X11R6/lib/X11/fonts/Type1/,
/usr/X11R6/lib/X11/fonts/100dpi/,
/usr/X11R6/lib/X11/fonts/75dpi/
[    42.676] (==) ModulePath set to "/usr/X11R6/lib/modules"
[    42.676] (II) The server relies on wscons to provide the list of
input devices.
If no devices become available, reconfigure wscons or disable AutoAddDevices.
[    42.676] (II) Loader magic: 0xa07680fd000
[    42.676] (II) Module ABI versions:
[    42.676] X.Org ANSI C Emulation: 0.4
[    42.676] X.Org Video Driver: 24.0
[    42.676] X.Org XInput driver : 24.1
[    42.676] X.Org Server Extension : 10.0
[    42.676] (--) PCI:*(0@0:2:0) 8086:5917:17aa:225c rev 7, Mem @
0x2ffe000000/16777216, 0xc0000000/536870912, I/O @ 0x0000e000/64
[    42.676] (II) LoadModule: "glx"
[    42.678] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[    42.688] (II) Module glx: vendor="X.Org Foundation"
[    42.688] compiled for 1.20.5, module version = 1.0.0
[    42.688] ABI class: X.Org Server Extension, version 10.0
[    42.688] (II) LoadModule: "intel"
[    42.689] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[    42.691] (II) Module intel: vendor="X.Org Foundation"
[    42.691] compiled for 1.20.5, module version = 2.99.916
[    42.691] Module class: X.Org Video Driver
[    42.691] ABI class: X.Org Video Driver, version 24.0
[    42.691] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    42.691] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    42.691] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    42.691] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics:
5200, 6200, P6300
[    42.729] (II) intel(0): Using Kernel Mode Setting driver: i915,
version 1.6.0 20180719
[    42.731] (WW) intel(0): Unknown chipset
[    42.731] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1,
sse4.2, avx, avx2
[    42.731] (II) intel(0): Creating default Display subsection in
Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    42.731] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    42.731] (==) intel(0): RGB weight 888
[    42.731] (==) intel(0): Default visual is TrueColor
[    42.731] (**) intel(0): Option "TearFree" "true"
[    42.732] (II) intel(0): Output eDP1 has no monitor section
[    42.733] (--) intel(0): Found backlight control interface wscons
(type 'platform') for output eDP1
[    42.733] (II) intel(0): Enabled output eDP1
[    42.733] (II) intel(0): Output DP1 has no monitor section
[    42.733] (II) intel(0): Enabled output DP1
[    42.733] (II) intel(0): Output HDMI1 has no monitor section
[    42.733] (II) intel(0): Enabled output HDMI1
[    42.733] (II) intel(0): Output DP2 has no monitor section
[    42.733] (II) intel(0): Enabled output DP2
[    42.733] (II) intel(0): Output HDMI2 has no monitor section
[    42.733] (II) intel(0): Enabled output HDMI2
[    42.733] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    42.733] (II) intel(0): Output VIRTUAL1 has no monitor section
[    42.733] (II) intel(0): Enabled output VIRTUAL1
[    42.733] (--) intel(0): Output eDP1 using initial mode 2560x1440 on pipe 0
[    42.733] (**) intel(0): TearFree enabled
[    42.733] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    42.733] (==) intel(0): DPI set to (96, 96)
[    42.733] (II) Loading sub module "dri3"
[    42.733] (II) LoadModule: "dri3"
[    42.733] (II) Module "dri3" already built-in
[    42.733] (II) Loading sub module "dri2"
[    42.733] (II) LoadModule: "dri2"
[    42.733] (II) Module "dri2" already built-in
[    42.733] (II) Loading sub module "present"
[    42.733] (II) LoadModule: "present"
[    42.733] (II) Module "present" already built-in
[    42.735] (II) intel(0): SNA initialized with generic backend
[    42.735] (==) intel(0): Backing store enabled
[    42.735] (==) intel(0): Silken mouse enabled
[    42.736] (II) intel(0): HW Cursor enabled
[    42.738] (==) intel(0): DPMS enabled
[    42.738] (II) intel(0): Textured video not supported on this hardware
[    42.739] (II) intel(0): [DRI2] Setup complete
[    42.739] (II) intel(0): [DRI2]   DRI driver: i965
[    42.739] (II) intel(0): [DRI2]   VDPAU driver: i965
[    42.739] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[    42.739] (II) intel(0): hardware support for Present enabled
[    42.739] (II) Initializing extension Generic Event Extension
[    42.740] (II) Initializing extension SHAPE
[    42.741] (II) Initializing extension MIT-SHM
[    42.741] (II) Initializing extension XInputExtension
[    42.742] (II) Initializing extension XTEST
[    42.742] (II) Initializing extension BIG-REQUESTS
[    42.743] (II) Initializing extension SYNC
[    42.743] (II) Initializing extension XKEYBOARD
[    42.744] (II) Initializing extension XC-MISC
[    42.744] (II) Initializing extension SECURITY
[    42.745] (II) Initializing extension XFIXES
[    42.745] (II) Initializing extension RENDER
[    42.746] (II) Initializing extension RANDR
[    42.747] (II) Initializing extension COMPOSITE
[    42.748] (II) Initializing extension DAMAGE
[    42.748] (II) Initializing extension MIT-SCREEN-SAVER
[    42.749] (II) Initializing extension DOUBLE-BUFFER
[    42.749] (II) Initializing extension RECORD
[    42.750] (II) Initializing extension DPMS
[    42.750] (II) Initializing extension Present
[    42.751] (II) Initializing extension DRI3
[    42.751] (II) Initializing extension X-Resource
[    42.752] (II) Initializing extension XVideo
[    42.752] (II) Initializing extension XVideo-MotionCompensation
[    42.752] (II) Initializing extension GLX
[    42.782] (II) AIGLX: Loaded and initialized i965
[    42.782] (II) GLX: Initialized DRI2 GL provider for screen 0
[    42.782] (II) Initializing extension XFree86-VidModeExtension
[    42.782] (II) Initializing extension XFree86-DGA
[    42.783] (II) Initializing extension XFree86-DRI
[    42.783] (II) Initializing extension DRI2
[    42.789] (II) intel(0): switch to mode 2560x1440@60.0 on eDP1
using pipe 0, position (0, 0), rotation normal, reflection none
[    42.812] (II) intel(0): Setting screen physical size to 677 x 381
[    42.914] (II) config/wscons: checking input device /dev/wskbd
[    42.914] (II) wskbd: using layout us
[    42.914] (II) LoadModule: "kbd"
[    42.915] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[    42.916] (II) Module kbd: vendor="X.Org Foundation"
[    42.916] compiled for 1.20.5, module version = 1.9.0
[    42.916] Module class: X.Org XInput Driver
[    42.916] ABI class: X.Org XInput driver, version 24.1
[    42.916] (II) Using input driver 'kbd' for '/dev/wskbd'
[    42.916] (**) /dev/wskbd: always reports core events
[    42.916] (**) /dev/wskbd: always reports core events
[    42.916] (**) Option "Protocol" "standard"
[    42.916] (**) Option "XkbRules" "base"
[    42.916] (**) Option "XkbModel" "pc105"
[    42.916] (**) Option "XkbLayout" "us"
[    42.916] (II) XINPUT: Adding extended input device "/dev/wskbd"
(type: KEYBOARD, id 6)
[    43.357] (II) config/wscons: checking input device /dev/wsmouse0
[    43.357] (II) LoadModule: "ws"
[    43.362] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[    43.363] (II) Module ws: vendor="X.Org Foundation"
[    43.364] compiled for 1.20.5, module version = 1.3.0
[    43.364] Module class: X.Org XInput Driver
[    43.364] ABI class: X.Org XInput driver, version 24.1
[    43.364] (II) Using input driver 'ws' for '/dev/wsmouse0'
[    43.364] (**) /dev/wsmouse0: always reports core events
[    43.364] (II) ws: /dev/wsmouse0: debuglevel 0
[    43.364] (**) Option "Device" "/dev/wsmouse0"
[    43.365] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
[    43.365] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
[    43.365] (**) ws: /dev/wsmouse0: associated screen: 0
[    43.802] (II) ws: /dev/wsmouse0: minimum x position: 0
[    43.802] (II) ws: /dev/wsmouse0: maximum x position: 2559
[    43.802] (II) ws: /dev/wsmouse0: minimum y position: 0
[    43.802] (II) ws: /dev/wsmouse0: maximum y position: 1439
[    43.802] (==) ws: /dev/wsmouse0: Buttons: 7
[    43.805] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
[    43.806] (II) XINPUT: Adding extended input device "/dev/wsmouse0"
(type: MOUSE, id 7)
[    44.243] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[    44.243] (**) /dev/wsmouse0: (accel) acceleration profile 0
[    44.243] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[    44.243] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[    44.247] (II) config/wscons: checking input device /dev/wsmouse
[    44.247] (II) Using input driver 'ws' for '/dev/wsmouse'
[    44.247] (**) /dev/wsmouse: always reports core events
[    44.247] (II) ws: /dev/wsmouse: debuglevel 0
[    44.247] (**) Option "Device" "/dev/wsmouse"
[    44.247] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[    44.247] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[    44.247] (**) ws: /dev/wsmouse: associated screen: 0
[    44.247] (II) ws: /dev/wsmouse: minimum x position: 0
[    44.247] (II) ws: /dev/wsmouse: maximum x position: 2559
[    44.247] (II) ws: /dev/wsmouse: minimum y position: 0
[    44.247] (II) ws: /dev/wsmouse: maximum y position: 1439
[    44.248] (==) ws: /dev/wsmouse: Buttons: 7
[    44.248] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[    44.248] (II) XINPUT: Adding extended input device "/dev/wsmouse"
(type: MOUSE, id 8)
[    44.249] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[    44.249] (**) /dev/wsmouse: (accel) acceleration profile 0
[    44.249] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[    44.249] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[    49.017] (II) intel(0): EDID vendor "AUO", prod id 9014
[    49.017] (II) intel(0): Printing DDC gathered Modelines:
[    49.017] (II) intel(0): Modeline "2560x1440"x0.0  245.50  2560
2608 2640 2720  1440 1443 1448 1504 -hsync -vsync (90.3 kHz eP)

On Wed, Nov 6, 2019 at 12:28 PM Jay Hart <[hidden email]> wrote:

>
> Running the latest BIOS firmware???
>
> Jay
>
> > Snapshot -current #427 did not solve the problem after all.
> > so after much testing with bios options, disabling the intel
> > acceleration and even the chrome "hardware acceleration", nothing
> > seems to stop the fan from spinning. It will take a good 5min for the
> > fan to stop when computer is idling (activity of 96-98% idling, using
> > top CS). If I do a zzz like after one minute of idling and wake it
> > right after, the fan just stops. CPU temp remains the same as before
> > the zzz.
> >
> > Not sure what to do next, I believe this could be reproduced on any X1
> > 6G... Just install 6.6, log through xenodm, launch Chrome, heavy
> > programs to start the FAN spinning then idle the laptop and see how
> > long it takes for the fan to stop.
> > You should also be able to reproduce the other behaviour: when cpu
> > temp is 55-60degC and fan spinning, you can zzz and wake it right
> > away, fan remains stopped (as long as you don't do cpu intense tasks
> > upon awake)
> >
> > would a "sendbug" be helpful?
> >
> >
> > On Sun, Nov 3, 2019 at 3:41 PM Josh <[hidden email]> wrote:
> >>
> >> hi,
> >>
> >> I've upgraded from 6.5 to 6.6 on my X1 6G and since then, I am unable
> >> to find the reason(s) of the high fan spinning.
> >> Is there a procedure to downgrade to 6.5 or should I just reinstall
> >> from scratch?
> >>
> >> thank you
> >
> >
>
>

Reply | Threaded
Open this post in threaded view
|

Re: Downgrade 6.6 to 6.5

Theo de Raadt-2
In reply to this post by Josh-106
I have some sort of X1rev6 and I don't see the problem.

The situation is you have the hardware, and you also have the sourcecode,
and the repository to traverse investigate the problem.

That sounds hard, until you give it a try.

Josh <[hidden email]> wrote:

> Snapshot -current #427 did not solve the problem after all.
> so after much testing with bios options, disabling the intel
> acceleration and even the chrome "hardware acceleration", nothing
> seems to stop the fan from spinning. It will take a good 5min for the
> fan to stop when computer is idling (activity of 96-98% idling, using
> top CS). If I do a zzz like after one minute of idling and wake it
> right after, the fan just stops. CPU temp remains the same as before
> the zzz.
>
> Not sure what to do next, I believe this could be reproduced on any X1
> 6G... Just install 6.6, log through xenodm, launch Chrome, heavy
> programs to start the FAN spinning then idle the laptop and see how
> long it takes for the fan to stop.
> You should also be able to reproduce the other behaviour: when cpu
> temp is 55-60degC and fan spinning, you can zzz and wake it right
> away, fan remains stopped (as long as you don't do cpu intense tasks
> upon awake)
>
> would a "sendbug" be helpful?
>
>
> On Sun, Nov 3, 2019 at 3:41 PM Josh <[hidden email]> wrote:
> >
> > hi,
> >
> > I've upgraded from 6.5 to 6.6 on my X1 6G and since then, I am unable
> > to find the reason(s) of the high fan spinning.
> > Is there a procedure to downgrade to 6.5 or should I just reinstall
> > from scratch?
> >
> > thank you
>

Reply | Threaded
Open this post in threaded view
|

Re: Downgrade 6.6 to 6.5

Otto Moerbeek
On Wed, Nov 06, 2019 at 09:06:52AM -0700, Theo de Raadt wrote:

> I have some sort of X1rev6 and I don't see the problem.

Same here. no fans out of control on my X1rev6.

        -Otto

>
> The situation is you have the hardware, and you also have the sourcecode,
> and the repository to traverse investigate the problem.
>
> That sounds hard, until you give it a try.
>
> Josh <[hidden email]> wrote:
>
> > Snapshot -current #427 did not solve the problem after all.
> > so after much testing with bios options, disabling the intel
> > acceleration and even the chrome "hardware acceleration", nothing
> > seems to stop the fan from spinning. It will take a good 5min for the
> > fan to stop when computer is idling (activity of 96-98% idling, using
> > top CS). If I do a zzz like after one minute of idling and wake it
> > right after, the fan just stops. CPU temp remains the same as before
> > the zzz.
> >
> > Not sure what to do next, I believe this could be reproduced on any X1
> > 6G... Just install 6.6, log through xenodm, launch Chrome, heavy
> > programs to start the FAN spinning then idle the laptop and see how
> > long it takes for the fan to stop.
> > You should also be able to reproduce the other behaviour: when cpu
> > temp is 55-60degC and fan spinning, you can zzz and wake it right
> > away, fan remains stopped (as long as you don't do cpu intense tasks
> > upon awake)
> >
> > would a "sendbug" be helpful?
> >
> >
> > On Sun, Nov 3, 2019 at 3:41 PM Josh <[hidden email]> wrote:
> > >
> > > hi,
> > >
> > > I've upgraded from 6.5 to 6.6 on my X1 6G and since then, I am unable
> > > to find the reason(s) of the high fan spinning.
> > > Is there a procedure to downgrade to 6.5 or should I just reinstall
> > > from scratch?
> > >
> > > thank you
> >
>

Reply | Threaded
Open this post in threaded view
|

Re: Downgrade 6.6 to 6.5

chohag
In reply to this post by Theo de Raadt-2
Theo de Raadt writes:
> I have some sort of X1rev6 and I don't see the problem.
>
> The situation is you have the hardware, and you also have the sourcecode,
> and the repository to traverse investigate the problem.
>
> That sounds hard, until you give it a try.

To be fair, it *is* hard. You have to have some understanding of
how the magic rock you've blindly devoted yourself to works and how
to encant the magical prescriptions that instruct it, which require
learning such esoteric arts as "reading" and "thinking" and "logic".

These are not things which come easily to many. The fact that all
the required information is at everyone's fingertips and literally
begging for attention notwthstanding.

Matthew