DVI output not detected with kms

classic Classic list List threaded Threaded
17 messages Options
Reply | Threaded
Open this post in threaded view
|

DVI output not detected with kms

Ralf Horstmann-2
Hi,

with current snapshot (i386) the DVI output of the docking station of
my Fujitsu Lifebook T4215 is not detected anymore. Under Linux (Debian
kernel 3.2) it's detected as DVI1. With older OpenBSD versions it was
detected as TMDS-1.

VGA on the docking station works fine as well as directly attached to the
laptop. In contrast to VGA, there is no DVI output at the laptop, only at the
docking station.

Cheers,
Ralf

xrandr:

Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 4096 x 4096
LVDS1 connected (normal left inverted right x axis y axis)
   1024x768       60.0 +   60.0  
   800x600        60.3     56.2  
   640x480        59.9  
VGA1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
   1920x1200      60.0*+
   1920x1080      60.0  
   1600x1200      60.0  
   1680x1050      60.0  
   1280x1024      60.0  
   1280x960       60.0  
   1024x768       60.0  
   800x600        60.3  
   640x480        60.0  
   720x400        70.1  
TV1 unknown connection (normal left inverted right x axis y axis)
   848x480        59.9 +
   640x480        59.9 +
   1024x768       59.9  
   800x600        59.9  

demsg:

OpenBSD 5.3-current (GENERIC) #79: Wed Mar 27 01:16:18 MDT 2013
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
real mem  = 2136797184 (2037MB)
avail mem = 2090475520 (1993MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/07/07, BIOS32 rev. 0 @ 0xfdbf4, SMBIOS rev. 2.4 @ 0xe5550 (53 entries)
bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "Version 1.14" date 05/07/2007
bios0: FUJITSU SIEMENS LIFEBOOK T4215
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT MCFG SSDT SSDT APIC HPET BOOT SLIC
acpi0: wakeup devices PCIB(S4) MODM(S3) HDEF(S3) PXS1(S4) PXS2(S4) LID_(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 8 (PCIB)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 5 (RP03)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpitz1 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: CMB1 model "CP293420" serial 1 type LION oem "Fujitsu"
acpibat1 at acpi0: CMB2 not present
acpibtn2 at acpi0: SLPB
acpidock0 at acpi0: REPL docked (15)
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD_
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 0xd0200/0x1000 0xdc000/0x1c00!
cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2000, 1667, 1333, 1000 MHz
memory map conflict 0xfed00000/0x400
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: apic 2 int 16
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Sigmatel STAC9228X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 22
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8055" rev 0x12, Yukon-2 EC Ultra rev. A1 (0x2): apic 2 int 16
msk0 at mskc0 port A: address 00:17:42:41:a8:2d
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 21
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 20
pci3 at ppb2 bus 5
5:0:0: mem address conflict 0xf0100000/0x1000
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:1b:77:72:01:7c
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 20
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 8
cbb0 at pci4 dev 3 function 0 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int 16
cbb1 at pci4 dev 3 function 1 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int 16, CardBus support disabled
sdhc0 at pci4 dev 3 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x00: apic 2 int 16
sdmmc0 at sdhc0
"O2 Micro OZ711MP1 XDHC" rev 0x00 at pci4 dev 3 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 9 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-841S, 1.31> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2MH12, PPG4> SCSI3 0/direct fixed naa.01507a51e26b8cdf
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
iic0 at ichiic0
iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00 0a=00 0b=00 0c=00 0d=00 0e=00 0f=00 10=00 11=20 24=00 b9=00 ba=00 words 00=0000 01=0000 02=0000 03=0000 04=0040 05=0000 06=0000 07=0000
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
"O2Micro, SmartCardBus Reader, V1.0" at pcmcia1 function 0 not configured
uhub5 at uhub0 port 4 "NEC Corporation USB2.0 Hub Controller" rev 2.00/1.00 addr 2
uplcom0 at uhub5 port 2 "Prolific Technology PL2303 Serial" rev 1.10/2.02 addr 3
ucom0 at uplcom0
uhub6 at uhub5 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr 4
uhub7 at uhub6 port 2 "GENESYS USB 2.0 HUB" rev 2.00/77.60 addr 5
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech Optical USB Mouse" rev 2.00/3.40 addr 6
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub7 port 3 configuration 1 interface 0 "Alcor Micro product 0x3108" rev 1.10/3.01 addr 7
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub7 port 3 configuration 1 interface 1 "Alcor Micro product 0x3108" rev 1.10/3.01 addr 7
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uaudio0 at uhub7 port 4 configuration 1 interface 0 "C-Media Electronics Inc. USB Multimedia Audio Device" rev 1.10/1.00 addr 8
uaudio0: audio rev 1.00, 8 mixer controls
audio1 at uaudio0
uhidev3 at uhub7 port 4 configuration 1 interface 3 "C-Media Electronics Inc. USB Multimedia Audio Device" rev 1.10/1.00 addr 8
uhidev3: iclass 3/0
uhid2 at uhidev3: input=16, output=16, feature=0
ugen0 at uhub3 port 1 "vendor 0x0c24 product 0x000f" rev 2.00/19.15 addr 2
ugen1 at uhub3 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/6.21 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (3e4d92862aa71140.a) swap on sd0b dump on sd0b
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 80821MB, 512 bytes/sector, 165522270 sectors

Xorg.0.log:

[    43.287] (--) checkDevMem: using aperture driver /dev/xf86
[    43.302] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)
[    43.318]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[    43.318] X Protocol Version 11, Revision 0
[    43.318] Build Operating System: OpenBSD 5.3 i386
[    43.318] Current Operating System: OpenBSD adams.internal 5.3 GENERIC#79 i386
[    43.318] Build Date: 26 March 2013  07:26:19PM
[    43.318]  
[    43.318] Current version of pixman: 0.28.0
[    43.318] Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    43.318] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    43.319] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 28 09:11:22 2013
[    43.325] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[    43.328] (==) No Layout section.  Using the first Screen section.
[    43.329] (==) No screen section available. Using defaults.
[    43.329] (**) |-->Screen "Default Screen Section" (0)
[    43.329] (**) |   |-->Monitor "<default monitor>"
[    43.331] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    43.331] (==) Disabling SIGIO handlers for input devices
[    43.331] (==) Automatically adding devices
[    43.331] (==) Automatically enabling devices
[    43.352] (==) FontPath set to:
        /usr/X11R6/lib/X11/fonts/misc/,
        /usr/X11R6/lib/X11/fonts/TTF/,
        /usr/X11R6/lib/X11/fonts/OTF/,
        /usr/X11R6/lib/X11/fonts/Type1/,
        /usr/X11R6/lib/X11/fonts/100dpi/,
        /usr/X11R6/lib/X11/fonts/75dpi/
[    43.352] (==) ModulePath set to "/usr/X11R6/lib/modules"
[    43.352] (II) The server relies on wscons to provide the list of input devices.
        If no devices become available, reconfigure wscons or disable AutoAddDevices.
[    43.353] (II) Loader magic: 0x3c022040
[    43.353] (II) Module ABI versions:
[    43.353] X.Org ANSI C Emulation: 0.4
[    43.353] X.Org Video Driver: 12.0
[    43.353] X.Org XInput driver : 16.0
[    43.353] X.Org Server Extension : 6.0
[    43.354] (--) PCI:*(0:0:2:0) 8086:27a2:10cf:1380 rev 3, Mem @ 0xf0300000/524288, 0xe0000000/268435456, 0xf0400000/262144, I/O @ 0x00001800/8
[    43.354] (--) PCI: (0:0:2:1) 8086:27a6:10cf:1380 rev 3, Mem @ 0xf0380000/524288
[    43.354] (II) LoadModule: "extmod"
[    43.361] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[    43.363] (II) Module extmod: vendor="X.Org Foundation"
[    43.363] compiled for 1.12.3, module version = 1.0.0
[    43.363] Module class: X.Org Server Extension
[    43.363] ABI class: X.Org Server Extension, version 6.0
[    43.363] (II) Loading extension MIT-SCREEN-SAVER
[    43.363] (II) Loading extension XFree86-VidModeExtension
[    43.363] (II) Loading extension XFree86-DGA
[    43.364] (II) Loading extension DPMS
[    43.364] (II) Loading extension XVideo
[    43.366] (II) Loading extension XVideo-MotionCompensation
[    43.366] (II) Loading extension X-Resource
[    43.366] (II) LoadModule: "dbe"
[    43.367] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[    43.369] (II) Module dbe: vendor="X.Org Foundation"
[    43.369] compiled for 1.12.3, module version = 1.0.0
[    43.369] Module class: X.Org Server Extension
[    43.369] ABI class: X.Org Server Extension, version 6.0
[    43.369] (II) Loading extension DOUBLE-BUFFER
[    43.369] (II) LoadModule: "glx"
[    43.370] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[    43.376] (II) Module glx: vendor="X.Org Foundation"
[    43.376] compiled for 1.12.3, module version = 1.0.0
[    43.376] ABI class: X.Org Server Extension, version 6.0
[    43.377] (==) AIGLX enabled
[    43.377] (II) Loading extension GLX
[    43.377] (II) LoadModule: "record"
[    43.378] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[    43.379] (II) Module record: vendor="X.Org Foundation"
[    43.380] compiled for 1.12.3, module version = 1.13.0
[    43.380] Module class: X.Org Server Extension
[    43.380] ABI class: X.Org Server Extension, version 6.0
[    43.380] (II) Loading extension RECORD
[    43.380] (II) LoadModule: "dri"
[    43.380] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[    43.384] (II) Module dri: vendor="X.Org Foundation"
[    43.384] compiled for 1.12.3, module version = 1.0.0
[    43.384] ABI class: X.Org Server Extension, version 6.0
[    43.385] (II) Loading extension XFree86-DRI
[    43.386] (II) LoadModule: "dri2"
[    43.386] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[    43.388] (II) Module dri2: vendor="X.Org Foundation"
[    43.388] compiled for 1.12.3, module version = 1.2.0
[    43.388] ABI class: X.Org Server Extension, version 6.0
[    43.388] (II) Loading extension DRI2
[    43.388] (==) Matched intel as autoconfigured driver 0
[    43.388] (==) Matched vesa as autoconfigured driver 1
[    43.388] (==) Assigned the driver to the xf86ConfigLayout
[    43.388] (II) LoadModule: "intel"
[    43.389] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[    43.398] (II) Module intel: vendor="X.Org Foundation"
[    43.398] compiled for 1.12.3, module version = 2.20.19
[    43.398] Module class: X.Org Video Driver
[    43.398] ABI class: X.Org Video Driver, version 12.0
[    43.399] (II) LoadModule: "vesa"
[    43.400] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[    43.401] (II) Module vesa: vendor="X.Org Foundation"
[    43.401] compiled for 1.12.3, module version = 2.3.2
[    43.401] Module class: X.Org Video Driver
[    43.401] ABI class: X.Org Video Driver, version 12.0
[    43.401] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
        Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
        Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
        Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
        Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
        Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
        Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
        Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
        Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
        Haswell Server (GT2+), Haswell SDV Desktop (GT1),
        Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
        Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
        Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
        Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
        Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
        Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
        Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
        Haswell ULT Server (GT1), Haswell ULT Server (GT2),
        Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
        Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
        Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
        Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
        Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
        ValleyView PO board
[    43.402] (II) VESA: driver for VESA chipsets: vesa
[    43.402] drmOpenDevice: node name is /dev/drm0
[    43.402] drmOpenDevice: open result is 10, (OK)
[    43.402] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    43.402] drmOpenDevice: node name is /dev/drm0
[    43.402] drmOpenDevice: open result is 10, (OK)
[    43.402] drmOpenByBusid: drmOpenMinor returns 10
[    43.402] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[    43.402] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    43.403] drmOpenDevice: node name is /dev/drm0
[    43.403] drmOpenDevice: open result is 10, (OK)
[    43.403] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    43.403] drmOpenDevice: node name is /dev/drm0
[    43.403] drmOpenDevice: open result is 10, (OK)
[    43.403] drmOpenByBusid: drmOpenMinor returns 10
[    43.403] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[    43.403] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    43.403] (WW) Falling back to old probe method for vesa
[    43.403] drmOpenDevice: node name is /dev/drm0
[    43.403] drmOpenDevice: open result is 10, (OK)
[    43.403] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    43.403] drmOpenDevice: node name is /dev/drm0
[    43.403] drmOpenDevice: open result is 10, (OK)
[    43.403] drmOpenByBusid: drmOpenMinor returns 10
[    43.403] drmOpenByBusid: Interface 1.4 failed, trying 1.1
[    43.403] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    43.403] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    43.403] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    43.403] (==) intel(0): RGB weight 888
[    43.403] (==) intel(0): Default visual is TrueColor
[    43.404] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
[    43.406] (**) intel(0): Relaxed fencing disabled
[    43.406] (**) intel(0): Wait on SwapBuffers? enabled
[    43.406] (**) intel(0): Triple buffering? enabled
[    43.406] (**) intel(0): Framebuffer tiled
[    43.406] (**) intel(0): Pixmaps tiled
[    43.406] (**) intel(0): 3D buffers tiled
[    43.406] (**) intel(0): SwapBuffers wait enabled
[    43.406] (==) intel(0): video overlay key set to 0x101fe
[    43.408] (II) intel(0): Output LVDS1 has no monitor section
[    43.429] (II) intel(0): Output VGA1 has no monitor section
[    43.429] (II) intel(0): Output TV1 has no monitor section
[    43.429] (II) intel(0): EDID for output LVDS1
[    43.432] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    43.432] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    43.432] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    43.432] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    43.432] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    43.432] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    43.432] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    43.432] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    43.432] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    43.432] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    43.432] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    43.432] (II) intel(0): Printing probed modes for output LVDS1
[    43.432] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1248  768 771 777 868 -hsync -vsync (52.1 kHz P)
[    43.432] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    43.432] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    43.432] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    43.432] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    43.463] (II) intel(0): EDID for output VGA1
[    43.463] (II) intel(0): Manufacturer: DEL  Model: a079  Serial#: 808859724
[    43.463] (II) intel(0): Year: 2012  Week: 12
[    43.463] (II) intel(0): EDID Version: 1.3
[    43.463] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[    43.463] (II) intel(0): Sync:  Separate  Composite  SyncOnGreen
[    43.463] (II) intel(0): Max Image Size [cm]: horiz.: 52  vert.: 32
[    43.463] (II) intel(0): Gamma: 2.20
[    43.463] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    43.463] (II) intel(0): First detailed timing is preferred mode
[    43.463] (II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
[    43.463] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    43.463] (II) intel(0): Supported established timings:
[    43.463] (II) intel(0): 720x400@70Hz
[    43.463] (II) intel(0): 640x480@60Hz
[    43.463] (II) intel(0): 800x600@60Hz
[    43.463] (II) intel(0): 1024x768@60Hz
[    43.463] (II) intel(0): Manufacturer's mask: 0
[    43.463] (II) intel(0): Supported standard timings:
[    43.463] (II) intel(0): #0: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    43.463] (II) intel(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    43.463] (II) intel(0): #2: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    43.463] (II) intel(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    43.463] (II) intel(0): #4: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    43.463] (II) intel(0): Supported detailed timing:
[    43.463] (II) intel(0): clock: 154.0 MHz   Image Size:  518 x 324 mm
[    43.463] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    43.463] (II) intel(0): v_active: 1200  v_sync: 1203  v_sync_end 1209 v_blanking: 1235 v_border: 0
[    43.463] (II) intel(0): Serial No: 19K7323L068L
[    43.463] (II) intel(0): Monitor name: DELL U2412M
[    43.463] (II) intel(0): Ranges: V min: 50 V max: 61 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    43.463] (II) intel(0): EDID (in hex):
[    43.463] (II) intel(0): 00ffffffffffff0010ac79a04c383630
[    43.463] (II) intel(0): 0c1601030e342078eaee95a3544c9926
[    43.463] (II) intel(0): 0f5054a1080081408180a940b300d1c0
[    43.463] (II) intel(0): 010101010101283c80a070b023403020
[    43.463] (II) intel(0): 360006442100001a000000ff0031394b
[    43.463] (II) intel(0): 373332334c3036384c0a000000fc0044
[    43.463] (II) intel(0): 454c4c2055323431324d0a20000000fd
[    43.463] (II) intel(0): 00323d1e5311000a2020202020200028
[    43.463] (II) intel(0): Printing probed modes for output VGA1
[    43.463] (II) intel(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[    43.463] (II) intel(0): Modeline "1920x1080"x60.0  172.78  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[    43.463] (II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    43.463] (II) intel(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    43.463] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    43.463] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    43.463] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    43.463] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    43.463] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    43.463] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    43.463] (II) intel(0): EDID for output TV1
[    43.463] (II) intel(0): Printing probed modes for output TV1
[    43.463] (II) intel(0): Modeline "848x480"x59.9   29.03  848 849 912 944  480 481 512 513 (30.7 kHz eP)
[    43.463] (II) intel(0): Modeline "640x480"x59.9   22.63  640 641 704 736  480 481 512 513 (30.7 kHz eP)
[    43.463] (II) intel(0): Modeline "1024x768"x59.9   53.77  1024 1025 1088 1120  768 769 800 801 (48.0 kHz e)
[    43.463] (II) intel(0): Modeline "800x600"x59.9   34.00  800 801 864 896  600 601 632 633 (37.9 kHz e)
[    43.463] (II) intel(0): Output LVDS1 connected
[    43.463] (II) intel(0): Output VGA1 connected
[    43.463] (II) intel(0): Output TV1 disconnected
[    43.463] (II) intel(0): Using exact sizes for initial modes
[    43.463] (II) intel(0): Output LVDS1 using initial mode 1024x768
[    43.463] (II) intel(0): Output VGA1 using initial mode 1024x768
[    43.464] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    43.464] (II) intel(0): Kernel page flipping support detected, enabling
[    43.464] (==) intel(0): DPI set to (96, 96)
[    43.464] (II) Loading sub module "fb"
[    43.464] (II) LoadModule: "fb"
[    43.467] (II) Loading /usr/X11R6/lib/modules/libfb.so
[    43.470] (II) Module fb: vendor="X.Org Foundation"
[    43.470] compiled for 1.12.3, module version = 1.0.0
[    43.470] ABI class: X.Org ANSI C Emulation, version 0.4
[    43.470] (II) Loading sub module "dri2"
[    43.470] (II) LoadModule: "dri2"
[    43.470] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[    43.470] (II) Module dri2: vendor="X.Org Foundation"
[    43.470] compiled for 1.12.3, module version = 1.2.0
[    43.470] ABI class: X.Org Server Extension, version 6.0
[    43.471] (II) UnloadModule: "vesa"
[    43.471] (II) Unloading vesa
[    43.471] (==) Depth 24 pixmap format is 32 bpp
[    43.472] (II) intel(0): [DRI2] Setup complete
[    43.472] (II) intel(0): [DRI2]   DRI driver: i915
[    43.472] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[    43.479] (II) UXA(0): Driver registered support for the following operations:
[    43.479] (II)         solid
[    43.479] (II)         copy
[    43.479] (II)         composite (RENDER acceleration)
[    43.479] (II)         put_image
[    43.479] (II)         get_image
[    43.479] (==) intel(0): Backing store disabled
[    43.479] (==) intel(0): Silken mouse disabled
[    43.482] (II) intel(0): Initializing HW Cursor
[    43.483] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    43.489] (==) intel(0): DPMS enabled
[    43.489] (==) intel(0): Intel XvMC decoder disabled
[    43.489] (II) intel(0): Set up textured video
[    43.489] (II) intel(0): Set up overlay video
[    43.491] (II) intel(0): direct rendering: DRI2 Enabled
[    43.587] (--) RandR disabled
[    43.588] (II) Initializing built-in extension Generic Event Extension
[    43.588] (II) Initializing built-in extension SHAPE
[    43.588] (II) Initializing built-in extension MIT-SHM
[    43.588] (II) Initializing built-in extension XInputExtension
[    43.588] (II) Initializing built-in extension XTEST
[    43.588] (II) Initializing built-in extension BIG-REQUESTS
[    43.588] (II) Initializing built-in extension SYNC
[    43.588] (II) Initializing built-in extension XKEYBOARD
[    43.588] (II) Initializing built-in extension XC-MISC
[    43.588] (II) Initializing built-in extension SECURITY
[    43.588] (II) Initializing built-in extension XINERAMA
[    43.588] (II) Initializing built-in extension XFIXES
[    43.588] (II) Initializing built-in extension RENDER
[    43.588] (II) Initializing built-in extension RANDR
[    43.588] (II) Initializing built-in extension COMPOSITE
[    43.588] (II) Initializing built-in extension DAMAGE
[    43.665] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    43.665] (II) AIGLX: enabled GLX_INTEL_swap_event
[    43.665] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    43.665] (II) AIGLX: enabled GLX_SGI_make_current_read
[    43.665] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    43.665] (II) AIGLX: Loaded and initialized i915
[    43.665] (II) GLX: Initialized DRI2 GL provider for screen 0
[    43.668] (II) intel(0): Setting screen physical size to 270 x 203
[    43.965] (II) config/wscons: checking input device /dev/wskbd
[    43.965] (II) wskbd: using layout de
[    43.965] (II) LoadModule: "kbd"
[    43.966] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[    43.968] (II) Module kbd: vendor="X.Org Foundation"
[    43.968] compiled for 1.12.3, module version = 1.6.2
[    43.968] Module class: X.Org XInput Driver
[    43.968] ABI class: X.Org XInput driver, version 16.0
[    43.968] (II) Using input driver 'kbd' for '/dev/wskbd'
[    43.968] (**) /dev/wskbd: always reports core events
[    43.968] (**) /dev/wskbd: always reports core events
[    43.968] (**) Option "Protocol" "standard"
[    43.968] (**) Option "XkbRules" "base"
[    43.968] (**) Option "XkbModel" "pc105"
[    43.968] (**) Option "XkbLayout" "de"
[    43.969] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[    44.423] (II) config/wscons: checking input device /dev/wsmouse0
[    44.423] (II) LoadModule: "synaptics"
[    44.425] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[    44.430] (II) Module synaptics: vendor="X.Org Foundation"
[    44.430] compiled for 1.12.3, module version = 1.6.2
[    44.430] Module class: X.Org XInput Driver
[    44.430] ABI class: X.Org XInput driver, version 16.0
[    44.430] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[    44.430] (**) /dev/wsmouse0: always reports core events
[    44.430] (**) Option "Device" "/dev/wsmouse0"
[    45.287] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5472 resolution 69
[    45.287] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4448 resolution 99
[    45.287] (**) /dev/wsmouse0: always reports core events
[    45.287] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: TOUCHPAD, id 7)
[    45.289] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant deceleration 2.5
[    45.289] (**) synaptics: /dev/wsmouse0: MaxSpeed is now 1.75
[    45.289] (**) synaptics: /dev/wsmouse0: AccelFactor is now 0.040
[    45.289] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[    45.289] (**) /dev/wsmouse0: (accel) acceleration profile 1
[    45.290] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[    45.290] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[    45.717] (II) config/wscons: checking input device /dev/wsmouse
[    45.717] (II) LoadModule: "ws"
[    45.719] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[    45.723] (II) Module ws: vendor="X.Org Foundation"
[    45.723] compiled for 1.12.3, module version = 1.3.0
[    45.723] Module class: X.Org XInput Driver
[    45.723] ABI class: X.Org XInput driver, version 16.0
[    45.723] (II) Using input driver 'ws' for '/dev/wsmouse'
[    45.723] (**) /dev/wsmouse: always reports core events
[    45.723] (II) ws: /dev/wsmouse: debuglevel 0
[    45.723] (**) Option "Device" "/dev/wsmouse"
[    45.723] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[    45.723] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[    45.723] (**) ws: /dev/wsmouse: associated screen: 0
[    45.723] (II) ws: /dev/wsmouse: minimum x position: 0
[    45.723] (II) ws: /dev/wsmouse: maximum x position: 1023
[    45.723] (II) ws: /dev/wsmouse: minimum y position: 0
[    45.723] (II) ws: /dev/wsmouse: maximum y position: 767
[    45.723] (==) ws: /dev/wsmouse: Buttons: 7
[    45.723] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[    45.723] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 8)
[    45.724] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[    45.724] (**) /dev/wsmouse: (accel) acceleration profile 0
[    45.724] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[    45.724] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[    86.887] (II) intel(0): Allocated new frame buffer 1920x1200 stride 8192, tiled
[   524.507] (II) intel(0): EDID vendor "DEL", prod id 41081
[   524.508] (II) intel(0): Using EDID range info for horizontal sync
[   524.508] (II) intel(0): Using EDID range info for vertical refresh
[   524.508] (II) intel(0): Printing DDC gathered Modelines:
[   524.508] (II) intel(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[   524.508] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   524.508] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   524.508] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   524.508] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   524.509] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   524.509] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   524.509] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   524.509] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   524.509] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[   568.559] (II) intel(0): EDID vendor "DEL", prod id 41081
[   568.559] (II) intel(0): Using hsync ranges from config file
[   568.559] (II) intel(0): Using vrefresh ranges from config file
[   568.559] (II) intel(0): Printing DDC gathered Modelines:
[   568.559] (II) intel(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[   568.559] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   568.559] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   568.559] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   568.560] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   568.560] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   568.560] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   568.560] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   568.560] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   568.560] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[   568.592] (II) intel(0): EDID vendor "DEL", prod id 41081
[   568.592] (II) intel(0): Using hsync ranges from config file
[   568.592] (II) intel(0): Using vrefresh ranges from config file
[   568.592] (II) intel(0): Printing DDC gathered Modelines:
[   568.592] (II) intel(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[   568.592] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   568.592] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   568.592] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   568.592] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   568.592] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   568.592] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   568.592] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   568.592] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   568.592] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[   607.041] (II) intel(0): EDID vendor "DEL", prod id 41081
[   607.041] (II) intel(0): Using hsync ranges from config file
[   607.041] (II) intel(0): Using vrefresh ranges from config file
[   607.041] (II) intel(0): Printing DDC gathered Modelines:
[   607.041] (II) intel(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[   607.041] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   607.041] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   607.041] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   607.041] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   607.041] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   607.041] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   607.041] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   607.041] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   607.041] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[   612.074] (II) intel(0): EDID vendor "DEL", prod id 41081
[   612.075] (II) intel(0): Using hsync ranges from config file
[   612.075] (II) intel(0): Using vrefresh ranges from config file
[   612.075] (II) intel(0): Printing DDC gathered Modelines:
[   612.075] (II) intel(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[   612.075] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   612.075] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   612.075] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   612.075] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   612.075] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   612.075] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   612.075] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   612.075] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   612.075] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[   625.346] (II) AIGLX: Suspending AIGLX clients for VT switch
[   626.851] (II) AIGLX: Resuming AIGLX clients after VT switch
[   675.381] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[   801.570] (II) intel(0): Allocated new frame buffer 1920x1200 stride 8192, tiled
[   888.966] (II) intel(0): EDID vendor "DEL", prod id 41081
[   888.966] (II) intel(0): Using hsync ranges from config file
[   888.966] (II) intel(0): Using vrefresh ranges from config file
[   888.966] (II) intel(0): Printing DDC gathered Modelines:
[   888.966] (II) intel(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
[   888.966] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   888.966] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   888.966] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   888.966] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   888.966] (II) intel(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[   888.966] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   888.966] (II) intel(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[   888.966] (II) intel(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   888.966] (II) intel(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Jonathan Gray-11
On Thu, Mar 28, 2013 at 09:38:20AM +0100, Ralf Horstmann wrote:

> Hi,
>
> with current snapshot (i386) the DVI output of the docking station of
> my Fujitsu Lifebook T4215 is not detected anymore. Under Linux (Debian
> kernel 3.2) it's detected as DVI1. With older OpenBSD versions it was
> detected as TMDS-1.
>
> VGA on the docking station works fine as well as directly attached to the
> laptop. In contrast to VGA, there is no DVI output at the laptop, only at the
> docking station.
>
> Cheers,
> Ralf

It sounds like your docking station has a SDVO output, which
apparently requires bitbanging for gmbus which we don't
yet do.

Try the following for a bit more information in your dmesg:

Index: drmP.h
===================================================================
RCS file: /cvs/src/sys/dev/pci/drm/drmP.h,v
retrieving revision 1.136
diff -u -p -r1.136 drmP.h
--- drmP.h 28 Mar 2013 23:47:37 -0000 1.136
+++ drmP.h 29 Mar 2013 01:29:55 -0000
@@ -74,6 +74,8 @@
 #include "drm_atomic.h"
 #include "agp.h"
 
+#define DRMDEBUG 1
+
 #define DRM_DEBUGBITS_DEBUG 0x1
 #define DRM_DEBUGBITS_KMS 0x2
 #define DRM_DEBUGBITS_FAILED_IOCTL 0x4
Index: drm_drv.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/drm/drm_drv.c,v
retrieving revision 1.101
diff -u -p -r1.101 drm_drv.c
--- drm_drv.c 22 Mar 2013 07:52:36 -0000 1.101
+++ drm_drv.c 29 Mar 2013 01:29:56 -0000
@@ -585,9 +585,11 @@ drmioctl(dev_t kdev, u_long cmd, caddr_t
 
  ++file_priv->ioctl_count;
 
+#if 0
  DRM_DEBUG("pid=%d, cmd=0x%02lx, nr=0x%02x, dev 0x%lx, auth=%d\n",
     DRM_CURRENTPID, cmd, DRM_IOCTL_NR(cmd), (long)&dev->device,
     file_priv->authenticated);
+#endif
 
  switch (cmd) {
  case FIONBIO:
Index: i915/i915_gem.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/drm/i915/i915_gem.c,v
retrieving revision 1.7
diff -u -p -r1.7 i915_gem.c
--- i915/i915_gem.c 28 Mar 2013 22:41:48 -0000 1.7
+++ i915/i915_gem.c 29 Mar 2013 01:29:57 -0000
@@ -1340,7 +1340,7 @@ i915_add_request(struct intel_ring_buffe
  was_empty = list_empty(&ring->request_list);
  list_add_tail(&request->list, &ring->request_list);
 
- DRM_DEBUG("%d\n", request->seqno);
+// DRM_DEBUG("%d\n", request->seqno);
 
  if (file) {
  struct drm_i915_file_private *file_priv = file->driver_priv;

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Jonathan Gray-11
On Fri, Mar 29, 2013 at 12:33:32PM +1100, Jonathan Gray wrote:

> On Thu, Mar 28, 2013 at 09:38:20AM +0100, Ralf Horstmann wrote:
> > Hi,
> >
> > with current snapshot (i386) the DVI output of the docking station of
> > my Fujitsu Lifebook T4215 is not detected anymore. Under Linux (Debian
> > kernel 3.2) it's detected as DVI1. With older OpenBSD versions it was
> > detected as TMDS-1.
> >
> > VGA on the docking station works fine as well as directly attached to the
> > laptop. In contrast to VGA, there is no DVI output at the laptop, only at the
> > docking station.
> >
> > Cheers,
> > Ralf
>
> It sounds like your docking station has a SDVO output, which
> apparently requires bitbanging for gmbus which we don't
> yet do.

Looking over the sdvo code it seems part of the i2c code
is wrong, try this:

Index: intel_sdvo.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/drm/i915/intel_sdvo.c,v
retrieving revision 1.2
diff -u -p -r1.2 intel_sdvo.c
--- intel_sdvo.c 19 Mar 2013 03:58:10 -0000 1.2
+++ intel_sdvo.c 29 Mar 2013 02:21:05 -0000
@@ -393,12 +393,23 @@ bool
 intel_sdvo_read_byte(struct intel_sdvo *intel_sdvo, u8 addr, u8 *ch)
 {
  uint8_t cmd = 0;
+ int ret;
 
  iic_acquire_bus(intel_sdvo->i2c, 0);
- iic_exec(intel_sdvo->i2c, I2C_OP_READ_WITH_STOP, addr, &cmd, 1, ch, 1, 0);
+ ret = iic_exec(intel_sdvo->i2c, I2C_OP_WRITE_WITH_STOP,
+    intel_sdvo->slave_addr, &cmd, 1, &addr, 1, 0);
+ if (ret) {
+ iic_release_bus(intel_sdvo->i2c, 0);
+ return (false);
+ }
+ ret = iic_exec(intel_sdvo->i2c, I2C_OP_READ_WITH_STOP,
+    intel_sdvo->slave_addr, &cmd, 1, ch, 1, 0);
  iic_release_bus(intel_sdvo->i2c, 0);
 
- return true;
+ if (ret)
+ return (false);
+ else
+ return (true);
 }
 
 #define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Ralf Horstmann-2
Hi,

* Jonathan Gray <[hidden email]> [2013-03-29 03:24]:

> On Fri, Mar 29, 2013 at 12:33:32PM +1100, Jonathan Gray wrote:
> > On Thu, Mar 28, 2013 at 09:38:20AM +0100, Ralf Horstmann wrote:
> > > Hi,
> > >
> > > with current snapshot (i386) the DVI output of the docking station of
> > > my Fujitsu Lifebook T4215 is not detected anymore. Under Linux (Debian
> > > kernel 3.2) it's detected as DVI1. With older OpenBSD versions it was
> > > detected as TMDS-1.
> > >
> > > VGA on the docking station works fine as well as directly attached to the
> > > laptop. In contrast to VGA, there is no DVI output at the laptop, only at the
> > > docking station.
> > >
> > > Cheers,
> > > Ralf
> >
> > It sounds like your docking station has a SDVO output, which
> > apparently requires bitbanging for gmbus which we don't
> > yet do.

After enabling drm debugging under linux and comparing the output I'd say it's
indeed an SDVO output. The SDVO_CMD_GET_DEVICE_CAPS log line looks similar, but
under OpenBSD it seems there is no response. See both Linux and OpenBSD log
below.

> Looking over the sdvo code it seems part of the i2c code
> is wrong, try this:
>
> Index: intel_sdvo.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/pci/drm/i915/intel_sdvo.c,v
> retrieving revision 1.2
> diff -u -p -r1.2 intel_sdvo.c
> --- intel_sdvo.c 19 Mar 2013 03:58:10 -0000 1.2
> +++ intel_sdvo.c 29 Mar 2013 02:21:05 -0000
> @@ -393,12 +393,23 @@ bool
>  intel_sdvo_read_byte(struct intel_sdvo *intel_sdvo, u8 addr, u8 *ch)
>  {
>   uint8_t cmd = 0;
> + int ret;
>  
>   iic_acquire_bus(intel_sdvo->i2c, 0);
> - iic_exec(intel_sdvo->i2c, I2C_OP_READ_WITH_STOP, addr, &cmd, 1, ch, 1, 0);
> + ret = iic_exec(intel_sdvo->i2c, I2C_OP_WRITE_WITH_STOP,
> +    intel_sdvo->slave_addr, &cmd, 1, &addr, 1, 0);
> + if (ret) {
> + iic_release_bus(intel_sdvo->i2c, 0);
> + return (false);
> + }
> + ret = iic_exec(intel_sdvo->i2c, I2C_OP_READ_WITH_STOP,
> +    intel_sdvo->slave_addr, &cmd, 1, ch, 1, 0);
>   iic_release_bus(intel_sdvo->i2c, 0);
>  
> - return true;
> + if (ret)
> + return (false);
> + else
> + return (true);
>  }
>  
>  #define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd}

That patch didn't help. The below log is from a kernel that includes the patch
and has drm debug logging enabled.

Cheers,
Ralf

========================================================================
The OpenBSD dmesg with debugging enabled and the above patch applied:

OpenBSD 5.3-current (GENERIC.MP) #1: Fri Mar 29 09:50:35 CET 2013
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
real mem  = 2136797184 (2037MB)
avail mem = 2090307584 (1993MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/07/07, BIOS32 rev. 0 @ 0xfdbf4, SMBIOS rev. 2.4 @ 0xe5550 (53 entries)
bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "Version 1.14" date 05/07/2007
bios0: FUJITSU SIEMENS LIFEBOOK T4215
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT MCFG SSDT SSDT APIC HPET BOOT SLIC
acpi0: wakeup devices PCIB(S4) MODM(S3) HDEF(S3) PXS1(S4) PXS2(S4) LID_(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 8 (PCIB)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 5 (RP03)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpitz1 at acpi0: critical temperature is 100 degC
acpifujitsu at acpi0 not configured
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: CMB1 model "CP293420" serial 1 type LION oem "Fujitsu"
acpibat1 at acpi0: CMB2 not present
acpibtn2 at acpi0: SLPB
acpidock0 at acpi0: REPL docked (15)
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 0xd0200/0x1000 0xdc000/0x1c00!
cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2000, 1667, 1333, 1000 MHz
memory map conflict 0xfed00000/0x400
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0[drm:pid0:drm_agp_init] agp_available = 1
[drm:pid0:drm_ctxbitmap_next] drm_ctxbitmap_next bit : 0
[drm:pid0:drm_ctxbitmap_init] drm_ctxbitmap_init : 0

[drm:pid0:intel_detect_pch] No PCH detected
inteldrm0: apic 2 int 16
[drm:pid0:drm_vblank_init] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm:pid0:drm_vblank_init] Driver supports precise vblank timestamp query.
[drm:pid0:intel_opregion_setup] graphic opregion physical addr: 0x0
[drm:pid0:intel_opregion_setup] ACPI OpRegion not supported!
[drm:pid0:init_vbt_defaults] Set default to SSC at 100MHz
[drm:pid0:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 96 display_clock_mode 0
[drm:pid0:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:pid0:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:parse_lfp_panel_data] VBT initial LVDS value 40300300
[drm:pid0:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:pid0:parse_sdvo_device_mapping] the SDVO device with slave addr 70 is found on SDVOB port
[drm:pid0:parse_sdvo_device_mapping] SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5
[drm:pid0:intel_modeset_init] todo set fb base
[drm:pid0:intel_modeset_init] 2 display pipes available.
[drm:pid0:intel_crtc_init] swapping pipes & planes for FBC
[drm:pid0:intel_modeset_init] plane 0 init failed: -19
[drm:pid0:intel_crtc_init] swapping pipes & planes for FBC
[drm:pid0:intel_modeset_init] plane 1 init failed: -19
[drm:pid0:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation
[drm:pid0:intel_lvds_init] using mode from VBT: [drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:intel_panel_get_backlight] get backlight PWM = 15625
[drm:pid0:intel_setup_outputs] probing SDVOB
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
[drm:pid0:intel_setup_outputs] probing SDVOC
[drm:pid0:intel_sdvo_init] No SDVO device found on SDVOC
[drm:pid0:intel_setup_overlay] initialized overlay support
[drm:pid0:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: disabled
[drm:pid0:intel_modeset_setup_hw_state] [CRTC:4] hw state readout: enabled
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=1
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:14:TV-14] hw state readout: disabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:5:LVDS-1] hw state readout: enabled
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:9:VGA-1] hw state readout: disabled
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:13:SVIDEO-1] hw state readout: disabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:drm_irq_install] irq=11
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid0:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid0:intel_crt_detect] CRT detected via hotplug
[drm:pid0:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
[drm:pid0:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid0:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:pid0:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1]
[drm:pid0:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid0:intel_get_load_detect_pipe] creating tmp fb for load-detection
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 5120
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_crtc_mode_set] [ENCODER:14:TV-14] set [MODE:0:NTSC 480i]
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 34
[drm:pid0:intel_calculate_wm] FIFO watermark level: -5
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 80
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_connector_check_state] [CONNECTOR:13:SVIDEO-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:intel_tv_detect_type] TV detected: c0007, 7f0000aa
[drm:pid0:intel_tv_detect_type] Unrecognised TV connection
[drm:pid0:intel_release_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] disconnected
[drm:pid0:drm_setup_crtcs]
[drm:pid0:drm_enable_connectors] connector 5 enabled? yes
[drm:pid0:drm_enable_connectors] connector 9 enabled? yes
[drm:pid0:drm_enable_connectors] connector 13 enabled? no
[drm:pid0:drm_target_preferred] looking for cmdline mode on connector 5
[drm:pid0:drm_pick_cmdline_mode] stub
[drm:pid0:drm_target_preferred] looking for preferred mode on connector 5
[drm:pid0:drm_target_preferred] found mode 1024x768
[drm:pid0:drm_target_preferred] looking for cmdline mode on connector 9
[drm:pid0:drm_pick_cmdline_mode] stub
[drm:pid0:drm_target_preferred] looking for preferred mode on connector 9
[drm:pid0:drm_target_preferred] found mode 1920x1200
[drm:pid0:drm_setup_crtcs] picking CRTCs for 4096x4096 config
[drm:pid0:drm_setup_crtcs] desired mode 1024x768 set on crtc 4
[drm:pid0:drm_setup_crtcs] desired mode 1920x1200 set on crtc 3
[drm:pid0:intelfb_create] allocated 1920x1200 fb: 0x007e0000, bo 0xd8fb8158
[drm:pid0:intelfb_create] skipping call to vga_switcheroo_client_fb_set
[drm:pid0:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:intel_modeset_stage_output_state] encoder changed, full mode switch
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid0:intel_modeset_stage_output_state] crtc changed, full mode switch
[drm:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_crtc_mode_set] [ENCODER:10:DAC-10] set [MODE:43:1920x1200]
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 120
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_connector_check_state] [CONNECTOR:9:VGA-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:pid0:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid0:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:4]
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0
[drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 1: Noop due to uninitialized mode.
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 120
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:i9xx_get_refclk] using SSC reference clock of 96 MHz
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe B:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 120
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:intel_crtc_mode_set] [ENCODER:6:LVDS-6] set [MODE:42:1024x768]
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid0:intel_calculate_wm] FIFO watermark level: 5
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 5, B: 1
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_enable_lvds] applying panel-fitter: 8, 0
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 15625
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_connector_check_state] [CONNECTOR:9:VGA-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Sigmatel STAC9228X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 22
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8055" rev 0x12, Yukon-2 EC Ultra rev. A1 (0x2): apic 2 int 16
msk0 at mskc0 port A: address 00:17:42:41:a8:2d
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 21
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 20
pci3 at ppb2 bus 5
5:0:0: mem address conflict 0xf0100000/0x1000
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:1b:77:72:01:7c
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 20
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 8
cbb0 at pci4 dev 3 function 0 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int 16
cbb1 at pci4 dev 3 function 1 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int 16, CardBus support disabled
sdhc0 at pci4 dev 3 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x00: apic 2 int 16
sdmmc0 at sdhc0
"O2 Micro OZ711MP1 XDHC" rev 0x00 at pci4 dev 3 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 9 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-841S, 1.31> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2MH12, PPG4> SCSI3 0/direct fixed naa.01507a51e26b8cdf
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
iic0 at ichiic0
iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00 0a=00 0b=00 0c=00 0d=00 0e=00 0f=00 10=00 11=20 24=00 b9=00 ba=00 words 00=0000 01=0000 02=0000 03=0000 04=0040 05=0000 06=0000 07=0000
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
"O2Micro, SmartCardBus Reader, V1.0" at pcmcia1 function 0 not configured
uhub5 at uhub0 port 4 "NEC Corporation USB2.0 Hub Controller" rev 2.00/1.00 addr 2
uplcom0 at uhub5 port 2 "Prolific Technology PL2303 Serial" rev 1.10/2.02 addr 3
ucom0 at uplcom0
uhub6 at uhub5 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr 4
uhub7 at uhub6 port 2 "GENESYS USB 2.0 HUB" rev 2.00/77.60 addr 5
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech Optical USB Mouse" rev 2.00/3.40 addr 6
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub7 port 3 configuration 1 interface 0 "Alcor Micro product 0x3108" rev 1.10/3.01 addr 7
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub7 port 3 configuration 1 interface 1 "Alcor Micro product 0x3108" rev 1.10/3.01 addr 7
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uaudio0 at uhub7 port 4 configuration 1 interface 0 "C-Media Electronics Inc. USB Multimedia Audio Device" rev 1.10/1.00 addr 8
uaudio0: audio rev 1.00, 8 mixer controls
audio1 at uaudio0
uhidev3 at uhub7 port 4 configuration 1 interface 3 "C-Media Electronics Inc. USB Multimedia Audio Device" rev 1.10/1.00 addr 8
uhidev3: iclass 3/0
uhid2 at uhidev3: input=16, output=16, feature=0
ugen0 at uhub3 port 1 "vendor 0x0c24 product 0x000f" rev 2.00/19.15 addr 2
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
ugen1 at uhub3 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/6.21 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (3e4d92862aa71140.a) swap on sd0b dump on sd0b
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd1: 80821MB, 512 bytes/sector, 165522270 sectors
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[drm:pid4:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid4:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid27115:drmopen] open_count = 0
[drm:pid27115:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid27115:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid27115:drm_firstopen]
[drm:pid27115:drmopen] minor = 1
[drm:pid6723:drmclose] open_count = 1
[drm:pid6723:drmclose] pid = 6723, device = 0xd3009400, open_count = 1
[drm:pid6723:drm_lastclose]
[drm:pid6723:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6723:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid27115:drmopen] open_count = 0
[drm:pid27115:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid27115:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid27115:drm_firstopen]
[drm:pid27115:drmopen] minor = 1
[drm:pid6723:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[drm:pid6723:drmclose] open_count = 1
[drm:pid6723:drmclose] pid = 6723, device = 0xd3009400, open_count = 1
[drm:pid6723:drm_lastclose]
[drm:pid6723:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6723:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid27115:drmopen] open_count = 0
[drm:pid27115:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid27115:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid27115:drm_firstopen]
[drm:pid27115:drmopen] minor = 1
[drm:pid6723:drmclose] open_count = 1
[drm:pid6723:drmclose] pid = 6723, device = 0xd3009400, open_count = 1
[drm:pid6723:drm_lastclose]
[drm:pid6723:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6723:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid27115:drmopen] open_count = 0
[drm:pid27115:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid27115:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid27115:drm_firstopen]
[drm:pid27115:drmopen] minor = 1
[drm:pid6723:drmclose] open_count = 1
[drm:pid6723:drmclose] pid = 6723, device = 0xd3009400, open_count = 1
[drm:pid6723:drm_lastclose]
[drm:pid6723:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6723:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid27115:drmopen] open_count = 0
[drm:pid27115:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid27115:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid27115:drm_firstopen]
[drm:pid27115:drmopen] minor = 1
[drm:pid6723:drmclose] open_count = 1
[drm:pid6723:drmclose] pid = 6723, device = 0xd3009400, open_count = 1
[drm:pid6723:drm_lastclose]
[drm:pid6723:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6723:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid27115:drmopen] open_count = 0
[drm:pid27115:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid27115:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid27115:drm_firstopen]
[drm:pid27115:drmopen] minor = 1
[drm:pid6723:i915_getparam] Unknown parameter 19
[drm:pid6723:i915_getparam] Unknown parameter 21
[drm:pid6723:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[drm:pid6723:drm_mode_getresources] [CRTC:3]
[drm:pid6723:drm_mode_getresources] [CRTC:4]
[drm:pid6723:drm_mode_getresources] [ENCODER:6:LVDS-6]
[drm:pid6723:drm_mode_getresources] [ENCODER:10:DAC-10]
[drm:pid6723:drm_mode_getresources] [ENCODER:14:TV-14]
[drm:pid6723:drm_mode_getresources] [CONNECTOR:5:LVDS-1]
[drm:pid6723:drm_mode_getresources] [CONNECTOR:9:VGA-1]
[drm:pid6723:drm_mode_getresources] [CONNECTOR:13:SVIDEO-1]
[drm:pid6723:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid6723:intel_crt_detect] CRT detected via hotplug
[drm:pid6723:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1]
[drm:pid6723:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid6723:intel_get_load_detect_pipe] no pipe available for load-detect
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] probed modes :
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 62:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 59:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 61:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid6723:intel_crt_detect] CRT detected via hotplug
[drm:pid6723:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1]
[drm:pid6723:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid6723:intel_get_load_detect_pipe] no pipe available for load-detect
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] probed modes :
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 62:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 59:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 61:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid6723:intel_panel_actually_set_backlight] set backlight PWM = 15625
[drm:pid6723:intel_panel_actually_set_backlight] set backlight PWM = 15625
[drm:pid6723:drm_mode_addfb] [FB:79]
[drm:pid6723:drm_mode_setcrtc] [CRTC:3]
[drm:pid6723:drm_mode_setcrtc] [CONNECTOR:9:VGA-1]
[drm:pid6723:intel_crtc_set_config] [CRTC:3] [FB:79] #connectors=1 (x y) (0 0)
[drm:pid6723:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6723:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid6723:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid6723:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid6723:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid6723:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid6723:intel_calculate_wm] FIFO watermark level: 5
[drm:pid6723:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid6723:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid6723:i9xx_update_wm] self-refresh entries: 64
[drm:pid6723:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid6723:i9xx_update_wm] memory self refresh enabled
[drm:pid6723:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid6723:i9xx_update_plane] Writing base 01400000 00000000 0 0 4096
[drm:pid6723:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid6723:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid6723:intel_calculate_wm] FIFO watermark level: 5
[drm:pid6723:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid6723:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid6723:i9xx_update_wm] self-refresh entries: 64
[drm:pid6723:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid6723:i9xx_update_wm] memory self refresh enabled
[drm:pid6723:intel_crtc_mode_set] [ENCODER:10:DAC-10] set [MODE:80:1024x768]
[drm:pid6723:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid6723:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid6723:intel_calculate_wm] FIFO watermark level: 5
[drm:pid6723:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid6723:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid6723:intel_calculate_wm] FIFO watermark level: 8
[drm:pid6723:i9xx_update_wm] FIFO watermarks - A: 5, B: 8
[drm:pid6723:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 8, C: 2, SR 1
[drm:pid6723:i9xx_update_wm] memory self refresh disabled
[drm:pid6723:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid6723:intel_connector_check_state] [CONNECTOR:9:VGA-1]
[drm:pid6723:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid6723:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid6723:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid6723:intel_modeset_check_state] [CRTC:3]
[drm:pid6723:intel_modeset_check_state] [CRTC:4]
[drm:pid6723:drm_mode_setcrtc] [CRTC:4]
[drm:pid6723:drm_mode_setcrtc] [CONNECTOR:5:LVDS-1]
[drm:pid6723:intel_crtc_set_config] [CRTC:4] [FB:79] #connectors=1 (x y) (0 0)
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid6723:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6723:i9xx_update_plane] Writing base 01400000 00000000 0 0 4096
[drm:pid6723:i915_getparam] Unknown parameter 19
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid6723:intel_crt_detect] CRT detected via hotplug
[drm:pid6723:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1]
[drm:pid6723:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid6723:intel_get_load_detect_pipe] no pipe available for load-detect
[drm:pid6723:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] probed modes :
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 62:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 59:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 61:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[drm:pid6723:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[drm:pid6723:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 3 to 3
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 3 to 3

========================================================================
Linux 3.2.39 dmesg (compiled from Debian sources) with drm.debug=4 and drm
ioctl silencing patch applied:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.39 (ralf@adams) (gcc version 4.7.2 (Debian 4.7.2-5) ) #2 SMP Fri Mar 29 12:10:53 CET 2013
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.2.39 root=/dev/mapper/adams-root ro quiet log_buf_len=1M drm.debug=4
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f640000 (usable)
[    0.000000]  BIOS-e820: 000000007f640000 - 000000007f651000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f651000 - 000000007f700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
[    0.000000]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: FUJITSU SIEMENS LIFEBOOK T4215/FJNB1B9, BIOS Version 1.14  05/07/2007
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x7f640 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-D3FFF write-protect
[    0.000000]   D4000-DBFFF uncachable
[    0.000000]   DC000-DFFFF write-back
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   2 base 07F800000 mask FFF800000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-000000007f640000
[    0.000000]  0000000000 - 007f600000 page 2M
[    0.000000]  007f600000 - 007f640000 page 4k
[    0.000000] kernel direct mapping tables up to 7f640000 @ 1fffc000-20000000
[    0.000000] log_buf_len: 1048576
[    0.000000] early log buf free: 521350(99%)
[    0.000000] RAMDISK: 36892000 - 37441000
[    0.000000] ACPI: RSDP 00000000000f5fb0 00014 (v00 FUJ   )
[    0.000000] ACPI: RSDT 000000007f6495d3 00048 (v01 FSC    PC       01140000 FUJ  00000100)
[    0.000000] ACPI: FACP 000000007f650f8c 00074 (v01 FSC    PC       01140000 FUJ  00000100)
[    0.000000] ACPI: DSDT 000000007f64962b 0670D (v01 FUJ    FJNB1B9  01140000 MSFT 0100000E)
[    0.000000] ACPI: FACS 000000007f651fc0 00040
[    0.000000] ACPI: SSDT 000000007f64fd38 001F9 (v01 FUJ    FJNB1B9  01140000 MSFT 0100000E)
[    0.000000] ACPI: MCFG 000000007f64ff31 0003C (v01 FUJ    FJNB1B9  01140000 FUJ  00000100)
[    0.000000] ACPI: SSDT 000000007f64ff6d 004DC (v01 FUJ    FJNB1B9  01140000 INTL 20050624)
[    0.000000] ACPI: SSDT 000000007f650b1d 00231 (v01 FUJ    FJNB1B9  01140000 INTL 20050624)
[    0.000000] ACPI: APIC 000000007f650d4e 00068 (v01 FUJ    FJNB1B9  01140000  LTP 00000000)
[    0.000000] ACPI: HPET 000000007f650db6 00038 (v01 FUJ    FJNB1B9  01140000 FUJ  00000100)
[    0.000000] ACPI: BOOT 000000007f650dee 00028 (v01 FUJ    FJNB1B9  01140000 FUJ  00000100)
[    0.000000] ACPI: SLIC 000000007f650e16 00176 (v01 FSC    PC       01140000 FSC  00000100)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000007f640000
[    0.000000] Initmem setup node 0 0000000000000000-000000007f640000
[    0.000000]   NODE_DATA [000000007f53b000 - 000000007f53ffff]
[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007cc00000-ffff88007e7fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   empty
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f640
[    0.000000] On node 0 totalpages: 521679
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 5 pages reserved
[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7078 pages used for memmap
[    0.000000]   DMA32 zone: 510618 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[    0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007f200000 s82944 r8192 d23552 u1048576
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 514540
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.39 root=/dev/mapper/adams-root ro quiet log_buf_len=1M drm.debug=4
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 2035924k/2087168k available (3408k kernel code, 452k absent, 50792k reserved, 3330k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:512 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1995.023 MHz processor.
[    0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.04 BogoMIPS (lpj=7980092)
[    0.004011] pid_max: default: 32768 minimum: 301
[    0.004066] Security Framework initialized
[    0.004074] AppArmor: AppArmor disabled by boot time parameter
[    0.004293] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.008675] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.009455] Mount-cache hash table entries: 256
[    0.009628] Initializing cgroup subsys cpuacct
[    0.009634] Initializing cgroup subsys memory
[    0.009649] Initializing cgroup subsys devices
[    0.009652] Initializing cgroup subsys freezer
[    0.009656] Initializing cgroup subsys net_cls
[    0.009658] Initializing cgroup subsys blkio
[    0.009668] Initializing cgroup subsys perf_event
[    0.009709] CPU: Physical Processor ID: 0
[    0.009711] CPU: Processor Core ID: 0
[    0.009714] mce: CPU supports 6 MCE banks
[    0.009724] CPU0: Thermal monitoring enabled (TM2)
[    0.009729] using mwait in idle threads.
[    0.010230] ACPI: Core revision 20110623
[    0.016557] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.058885] CPU0: Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
[    0.060003] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[    0.060003] PEBS disabled due to CPU errata.
[    0.060003] ... version:                2
[    0.060003] ... bit width:              40
[    0.060003] ... generic registers:      2
[    0.060003] ... value mask:             000000ffffffffff
[    0.060003] ... max period:             000000007fffffff
[    0.060003] ... fixed-purpose events:   3
[    0.060003] ... event mask:             0000000700000003
[    0.060003] NMI watchdog enabled, takes one hw-pmu counter.
[    0.060003] Booting Node   0, Processors  #1 Ok.
[    0.060003] smpboot cpu 1: start_ip = 9a000
[    0.148052] NMI watchdog enabled, takes one hw-pmu counter.
[    0.148101] Brought up 2 CPUs
[    0.148104] Total of 2 processors activated (7979.98 BogoMIPS).
[    0.150262] devtmpfs: initialized
[    0.153661] PM: Registering ACPI NVS region at 7f651000 (716800 bytes)
[    0.153661] print_constraints: dummy:
[    0.153661] NET: Registered protocol family 16
[    0.153661] ACPI: bus type pci registered
[    0.153661] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.153661] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.160353] PCI: Using configuration type 1 for base access
[    0.161099] bio: create slab <bio-0> at 0
[    0.161099] ACPI: Added _OSI(Module Device)
[    0.161099] ACPI: Added _OSI(Processor Device)
[    0.161099] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.161099] ACPI: Added _OSI(Processor Aggregator Device)
[    0.161293] ACPI: EC: Look up EC in DSDT
[    0.165004] ACPI: SSDT 000000007f65160c 0084A (v01 FUJ    FJNB1B9  01140000 INTL 20050624)
[    0.165489] ACPI: Dynamic OEM Table Load:
[    0.165493] ACPI: SSDT           (null) 0084A (v01 FUJ    FJNB1B9  01140000 INTL 20050624)
[    0.167561] ACPI: SSDT 000000007f650449 001E8 (v01 FUJ    FJNB1B9  01140000 INTL 20050624)
[    0.167871] ACPI: Dynamic OEM Table Load:
[    0.167874] ACPI: SSDT           (null) 001E8 (v01 FUJ    FJNB1B9  01140000 INTL 20050624)
[    0.168015] ACPI: SSDT 000000007f6508c8 001D0 (v01 FUJ    FJNB1B9  01140000 INTL 20050624)
[    0.168307] ACPI: Dynamic OEM Table Load:
[    0.168310] ACPI: SSDT           (null) 001D0 (v01 FUJ    FJNB1B9  01140000 INTL 20050624)
[    0.168607] ACPI: SSDT 000000007f650841 00087 (v01 FUJ    FJNB1B9  01140000 INTL 20050624)
[    0.168907] ACPI: Dynamic OEM Table Load:
[    0.168910] ACPI: SSDT           (null) 00087 (v01 FUJ    FJNB1B9  01140000 INTL 20050624)
[    0.169036] ACPI: SSDT 000000007f650a98 00085 (v01 FUJ    FJNB1B9  01140000 INTL 20050624)
[    0.169328] ACPI: Dynamic OEM Table Load:
[    0.169331] ACPI: SSDT           (null) 00085 (v01 FUJ    FJNB1B9  01140000 INTL 20050624)
[    0.169616] ACPI: Interpreter enabled
[    0.169622] ACPI: (supports S0 S3 S4 S5)
[    0.169649] ACPI: Using IOAPIC for interrupt routing
[    0.175970] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.176794] ACPI: ACPI Dock Station Driver: 2 docks/bays found
[    0.176797] HEST: Table not found.
[    0.176801] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.177215] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.178045] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.178049] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.178052] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.178056] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[    0.178059] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[    0.178063] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[    0.178075] pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
[    0.178129] pci 0000:00:02.0: [8086:27a2] type 0 class 0x000300
[    0.178142] pci 0000:00:02.0: reg 10: [mem 0xf0300000-0xf037ffff]
[    0.178149] pci 0000:00:02.0: reg 14: [io  0x1800-0x1807]
[    0.178156] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref]
[    0.178163] pci 0000:00:02.0: reg 1c: [mem 0xf0400000-0xf043ffff]
[    0.178209] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[    0.178219] pci 0000:00:02.1: reg 10: [mem 0xf0380000-0xf03fffff]
[    0.178328] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[    0.178350] pci 0000:00:1b.0: reg 10: [mem 0xf0640000-0xf0643fff 64bit]
[    0.178454] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.178490] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[    0.178599] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.178636] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[    0.178744] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.178781] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[    0.178889] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.178928] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[    0.178984] pci 0000:00:1d.0: reg 20: [io  0x1820-0x183f]
[    0.179029] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[    0.179085] pci 0000:00:1d.1: reg 20: [io  0x1840-0x185f]
[    0.179129] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[    0.179186] pci 0000:00:1d.2: reg 20: [io  0x1860-0x187f]
[    0.179230] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[    0.179286] pci 0000:00:1d.3: reg 20: [io  0x1880-0x189f]
[    0.179342] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[    0.179366] pci 0000:00:1d.7: reg 10: [mem 0xf0644000-0xf06443ff]
[    0.179471] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.179500] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[    0.179597] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[    0.179710] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.179717] pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
[    0.179723] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at fd00 (mask 007f)
[    0.179788] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[    0.179805] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.179817] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.179830] pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
[    0.179842] pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
[    0.179854] pci 0000:00:1f.1: reg 20: [io  0x1810-0x181f]
[    0.179907] pci 0000:00:1f.2: [8086:27c5] type 0 class 0x000106
[    0.179931] pci 0000:00:1f.2: reg 10: [io  0x18d0-0x18d7]
[    0.179944] pci 0000:00:1f.2: reg 14: [io  0x18c4-0x18c7]
[    0.179956] pci 0000:00:1f.2: reg 18: [io  0x18c8-0x18cf]
[    0.179969] pci 0000:00:1f.2: reg 1c: [io  0x18c0-0x18c3]
[    0.179982] pci 0000:00:1f.2: reg 20: [io  0x18b0-0x18bf]
[    0.179994] pci 0000:00:1f.2: reg 24: [mem 0xf0644400-0xf06447ff]
[    0.180060] pci 0000:00:1f.2: PME# supported from D3hot
[    0.180085] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[    0.180158] pci 0000:00:1f.3: reg 20: [io  0x18e0-0x18ff]
[    0.180303] pci 0000:02:00.0: [11ab:4363] type 0 class 0x000200
[    0.180340] pci 0000:02:00.0: reg 10: [mem 0xf0000000-0xf0003fff 64bit]
[    0.180360] pci 0000:02:00.0: reg 18: [io  0x2000-0x20ff]
[    0.180430] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[    0.180541] pci 0000:02:00.0: supports D1 D2
[    0.180543] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.188034] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.188040] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.188046] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf00fffff]
[    0.188112] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[    0.188293] pci 0000:05:00.0: [8086:4222] type 0 class 0x000280
[    0.188349] pci 0000:05:00.0: reg 10: [mem 0xf0100000-0xf0100fff]
[    0.188767] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[    0.188848] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.188887] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[    0.188953] pci 0000:08:03.0: [1217:7134] type 2 class 0x000607
[    0.188978] pci 0000:08:03.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.189021] pci 0000:08:03.0: supports D1 D2
[    0.189024] pci 0000:08:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.189054] pci 0000:08:03.1: [1217:7134] type 2 class 0x000607
[    0.189079] pci 0000:08:03.1: reg 10: [mem 0x00000000-0x00000fff]
[    0.189122] pci 0000:08:03.1: supports D1 D2
[    0.189124] pci 0000:08:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.189154] pci 0000:08:03.2: [1217:7120] type 0 class 0x000805
[    0.189181] pci 0000:08:03.2: reg 10: [mem 0xf0201000-0xf02010ff]
[    0.189295] pci 0000:08:03.2: supports D1 D2
[    0.189298] pci 0000:08:03.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.189328] pci 0000:08:03.3: [1217:7130] type 0 class 0x000680
[    0.189353] pci 0000:08:03.3: reg 10: [mem 0xf0200000-0xf0200fff]
[    0.189469] pci 0000:08:03.3: supports D1 D2
[    0.189471] pci 0000:08:03.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.189543] pci 0000:00:1e.0: PCI bridge to [bus 08-09] (subtractive decode)
[    0.189552] pci 0000:00:1e.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.189561] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.189564] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[    0.189576] pci 0000:08:03.1: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.189630] pci_bus 0000:09: [bus 09-0c] partially hidden behind transparent bridge 0000:08 [bus 08-09]
[    0.189676] pci_bus 0000:0d: [bus 0d-10] partially hidden behind transparent bridge 0000:08 [bus 08-09]
[    0.189707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.189887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.189977] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.190043] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.190100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.190161]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.190165]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[    0.190167] ACPI _OSC control for PCIe not granted, disabling ASPM
[    0.195063] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.195129] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.195191] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.195254] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.195316] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.195378] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.195439] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[    0.195500] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
[    0.195615] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.195615] vgaarb: loaded
[    0.195615] vgaarb: bridge control possible 0000:00:02.0
[    0.195615] PCI: Using ACPI for IRQ routing
[    0.198181] PCI: pci_cache_line_size set to 64 bytes
[    0.198234] pci 0000:05:00.0: no compatible bridge window for [mem 0xf0100000-0xf0100fff]
[    0.198304] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[    0.198307] reserve RAM buffer: 000000007f640000 - 000000007fffffff
[    0.198450] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.198456] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.198462] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.204109] Switching to clocksource hpet
[    0.206381] pnp: PnP ACPI init
[    0.206399] ACPI: bus type pnp registered
[    0.206423] pnp 00:00: [mem 0xf8000000-0xfbffffff]
[    0.206482] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.206486] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.206894] pnp 00:01: [bus 00-ff]
[    0.206897] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.206900] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.206903] pnp 00:01: [io  0x0d00-0xffff window]
[    0.206906] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.206908] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[    0.206911] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[    0.206914] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[    0.206916] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[    0.206919] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[    0.206922] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[    0.206925] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[    0.206927] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[    0.206930] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[    0.206934] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[    0.206937] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[    0.206939] pnp 00:01: [mem 0x000ec000-0x000effff window]
[    0.206942] pnp 00:01: [mem 0x000f0000-0x000fffff window]
[    0.206945] pnp 00:01: [mem 0x80000000-0xfebfffff window]
[    0.206948] pnp 00:01: [mem 0x00000000 window]
[    0.207016] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.207105] pnp 00:02: [io  0x0010-0x001f]
[    0.207108] pnp 00:02: [io  0x0024-0x0025]
[    0.207110] pnp 00:02: [io  0x0028-0x0029]
[    0.207112] pnp 00:02: [io  0x002c-0x002d]
[    0.207115] pnp 00:02: [io  0x002e-0x002f]
[    0.207117] pnp 00:02: [io  0x0030-0x0031]
[    0.207119] pnp 00:02: [io  0x0034-0x0035]
[    0.207122] pnp 00:02: [io  0x0038-0x0039]
[    0.207124] pnp 00:02: [io  0x003c-0x003d]
[    0.207126] pnp 00:02: [io  0x0050-0x0053]
[    0.207129] pnp 00:02: [io  0x0072-0x0077]
[    0.207131] pnp 00:02: [io  0x0080]
[    0.207133] pnp 00:02: [io  0x0090-0x009f]
[    0.207135] pnp 00:02: [io  0x00a4-0x00a5]
[    0.207138] pnp 00:02: [io  0x00a8-0x00a9]
[    0.207140] pnp 00:02: [io  0x00ac-0x00ad]
[    0.207142] pnp 00:02: [io  0x00b0-0x00b1]
[    0.207145] pnp 00:02: [io  0x00b2-0x00b3]
[    0.207147] pnp 00:02: [io  0x00b4-0x00b5]
[    0.207149] pnp 00:02: [io  0x00b8-0x00b9]
[    0.207152] pnp 00:02: [io  0x00bc-0x00bd]
[    0.207154] pnp 00:02: [io  0x04d0-0x04d1]
[    0.207156] pnp 00:02: [io  0x0800-0x080f]
[    0.207159] pnp 00:02: [io  0x1000-0x107f]
[    0.207162] pnp 00:02: [io  0x1080-0x10ff]
[    0.207165] pnp 00:02: [io  0x1100-0x111f]
[    0.207167] pnp 00:02: [io  0x1180-0x11bf]
[    0.207169] pnp 00:02: [io  0xf800-0xf87f]
[    0.207172] pnp 00:02: [io  0xf880-0xf8ff]
[    0.207174] pnp 00:02: [io  0xfc00-0xfc7f]
[    0.207176] pnp 00:02: [io  0xfc80-0xfcff]
[    0.207179] pnp 00:02: [io  0xfd0c-0xfd6f]
[    0.207181] pnp 00:02: [io  0xfe00-0xfe01]
[    0.207183] pnp 00:02: [mem 0xf8000000-0xfbffffff]
[    0.207186] pnp 00:02: [mem 0xfed14000-0xfed17fff]
[    0.207188] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[    0.207191] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[    0.207193] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[    0.207196] pnp 00:02: [mem 0xfed20000-0xfed3ffff]
[    0.207198] pnp 00:02: [mem 0xfed45000-0xfed8ffff]
[    0.207201] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[    0.207203] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[    0.207206] pnp 00:02: [mem 0xfef00000-0xfeffffff]
[    0.207208] pnp 00:02: [mem 0x000cec00-0x000cefff]
[    0.207211] pnp 00:02: [mem 0xffb00000-0xffbfffff]
[    0.207213] pnp 00:02: [mem 0xfed40000-0xfed44fff]
[    0.207340] system 00:02: [io  0x04d0-0x04d1] has been reserved
[    0.207343] system 00:02: [io  0x0800-0x080f] has been reserved
[    0.207347] system 00:02: [io  0x1000-0x107f] has been reserved
[    0.207350] system 00:02: [io  0x1080-0x10ff] has been reserved
[    0.207353] system 00:02: [io  0x1100-0x111f] has been reserved
[    0.207356] system 00:02: [io  0x1180-0x11bf] has been reserved
[    0.207360] system 00:02: [io  0xf800-0xf87f] has been reserved
[    0.207363] system 00:02: [io  0xf880-0xf8ff] has been reserved
[    0.207366] system 00:02: [io  0xfc00-0xfc7f] has been reserved
[    0.207370] system 00:02: [io  0xfc80-0xfcff] has been reserved
[    0.207373] system 00:02: [io  0xfd0c-0xfd6f] has been reserved
[    0.207377] system 00:02: [io  0xfe00-0xfe01] has been reserved
[    0.207380] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.207385] system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
[    0.207389] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.207392] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.207396] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.207399] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.207403] system 00:02: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.207407] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.207410] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.207414] system 00:02: [mem 0xfef00000-0xfeffffff] has been reserved
[    0.207417] system 00:02: [mem 0x000cec00-0x000cefff] has been reserved
[    0.207421] system 00:02: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.207424] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.207428] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.207486] pnp 00:03: [io  0xfd70-0xfd7f]
[    0.207498] pnp 00:03: [irq 5]
[    0.207533] pnp 00:03: Plug and Play ACPI device, IDs FUJ02bf (active)
[    0.207564] pnp 00:04: [io  0x0220-0x0227]
[    0.207571] pnp 00:04: [irq 4]
[    0.207604] pnp 00:04: Plug and Play ACPI device, IDs FUJ02e5 (active)
[    0.207662] pnp 00:05: [io  0x0000-0x000f]
[    0.207664] pnp 00:05: [io  0x0081-0x008f]
[    0.207667] pnp 00:05: [io  0x00c0-0x00df]
[    0.207670] pnp 00:05: [dma 4]
[    0.207707] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.207742] pnp 00:06: [io  0x0070-0x0071]
[    0.207749] pnp 00:06: [irq 8]
[    0.207786] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.207806] pnp 00:07: [io  0x0061]
[    0.207843] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.207863] pnp 00:08: [io  0x00f0-0x00fe]
[    0.207870] pnp 00:08: [irq 13]
[    0.207904] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.207924] pnp 00:09: [io  0x0060]
[    0.207926] pnp 00:09: [io  0x0064]
[    0.207933] pnp 00:09: [irq 1]
[    0.207971] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.207995] pnp 00:0a: [irq 12]
[    0.208042] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.208142] pnp 00:0b: [mem 0xfed00000-0xfed003ff]
[    0.208206] system 00:0b: [mem 0xfed00000-0xfed003ff] has been reserved
[    0.208210] system 00:0b: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.208492] pnp 00:0c: [io  0x02e8-0x02ef]
[    0.208499] pnp 00:0c: [irq 6]
[    0.208557] pnp 00:0c: Plug and Play ACPI device, IDs PNP0510 (active)
[    0.209017] pnp: PnP ACPI: found 13 devices
[    0.209019] ACPI: ACPI bus type pnp unregistered
[    0.217061] PCI: max bus depth: 2 pci_try_num: 3
[    0.217134] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x800fffff pref]
[    0.217139] pci 0000:00:1c.2: BAR 14: assigned [mem 0x80100000-0x801fffff]
[    0.217143] pci 0000:00:1e.0: BAR 15: assigned [mem 0x84000000-0x8bffffff pref]
[    0.217148] pci 0000:00:1e.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.217152] pci 0000:00:1c.2: BAR 14: reassigned [mem 0x80100000-0x803fffff]
[    0.217156] pci 0000:00:1c.2: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.217161] pci 0000:00:1c.2: BAR 13: assigned [io  0x4000-0x4fff]
[    0.217165] pci 0000:00:1c.1: BAR 14: assigned [mem 0x80600000-0x807fffff]
[    0.217169] pci 0000:00:1c.1: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
[    0.217173] pci 0000:00:1c.1: BAR 13: assigned [io  0x5000-0x5fff]
[    0.217178] pci 0000:00:1c.0: BAR 15: reassigned [mem 0x80a00000-0x80cfffff pref]
[    0.217182] pci 0000:02:00.0: BAR 6: assigned [mem 0x80a00000-0x80a1ffff pref]
[    0.217186] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.217190] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.217197] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf00fffff]
[    0.217202] pci 0000:00:1c.0:   bridge window [mem 0x80a00000-0x80cfffff pref]
[    0.217210] pci 0000:00:1c.1: PCI bridge to [bus 03-04]
[    0.217214] pci 0000:00:1c.1:   bridge window [io  0x5000-0x5fff]
[    0.217221] pci 0000:00:1c.1:   bridge window [mem 0x80600000-0x807fffff]
[    0.217227] pci 0000:00:1c.1:   bridge window [mem 0x80800000-0x809fffff 64bit pref]
[    0.217236] pci 0000:05:00.0: BAR 0: assigned [mem 0x80100000-0x80100fff]
[    0.217250] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[    0.217254] pci 0000:00:1c.2:   bridge window [io  0x4000-0x4fff]
[    0.217260] pci 0000:00:1c.2:   bridge window [mem 0x80100000-0x803fffff]
[    0.217266] pci 0000:00:1c.2:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.217279] pci 0000:08:03.0: BAR 0: assigned [mem 0x80000000-0x80000fff]
[    0.217286] pci 0000:08:03.1: BAR 0: assigned [mem 0x8c000000-0x8c000fff]
[    0.217295] pci 0000:08:03.1: BAR 16: assigned [mem 0x90000000-0x93ffffff]
[    0.217298] pci 0000:08:03.1: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[    0.217301] pci 0000:08:03.1: BAR 14: assigned [io  0x3000-0x30ff]
[    0.217304] pci 0000:08:03.1: BAR 13: assigned [io  0x3400-0x34ff]
[    0.217309] pci 0000:08:03.0: BAR 16: assigned [mem 0x94000000-0x97ffffff]
[    0.217312] pci 0000:08:03.0: BAR 15: assigned [mem 0x88000000-0x8bffffff pref]
[    0.217316] pci 0000:08:03.0: BAR 14: assigned [io  0x3800-0x38ff]
[    0.217319] pci 0000:08:03.0: BAR 13: assigned [io  0x3c00-0x3cff]
[    0.217322] pci 0000:08:03.0: CardBus bridge to [bus 09-0c]
[    0.217324] pci 0000:08:03.0:   bridge window [io  0x3c00-0x3cff]
[    0.217330] pci 0000:08:03.0:   bridge window [io  0x3800-0x38ff]
[    0.217336] pci 0000:08:03.0:   bridge window [mem 0x88000000-0x8bffffff pref]
[    0.217342] pci 0000:08:03.0:   bridge window [mem 0x94000000-0x97ffffff]
[    0.217348] pci 0000:08:03.1: CardBus bridge to [bus 0d-10]
[    0.217351] pci 0000:08:03.1:   bridge window [io  0x3400-0x34ff]
[    0.217356] pci 0000:08:03.1:   bridge window [io  0x3000-0x30ff]
[    0.217362] pci 0000:08:03.1:   bridge window [mem 0x84000000-0x87ffffff pref]
[    0.217368] pci 0000:08:03.1:   bridge window [mem 0x90000000-0x93ffffff]
[    0.217374] pci 0000:00:1e.0: PCI bridge to [bus 08-09]
[    0.217378] pci 0000:00:1e.0:   bridge window [io  0x3000-0x3fff]
[    0.217385] pci 0000:00:1e.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    0.217390] pci 0000:00:1e.0:   bridge window [mem 0x84000000-0x8bffffff pref]
[    0.217415] pci 0000:00:1c.0: setting latency timer to 64
[    0.217422] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[    0.217434] pci 0000:00:1c.1: setting latency timer to 64
[    0.217441] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[    0.217452] pci 0000:00:1c.2: setting latency timer to 64
[    0.217461] pci 0000:00:1e.0: setting latency timer to 64
[    0.217480] pci 0000:08:03.1: enabling device (0080 -> 0083)
[    0.217489] pci 0000:08:03.1: setting latency timer to 64
[    0.217494] pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
[    0.217497] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[    0.217500] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
[    0.217502] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf00fffff]
[    0.217505] pci_bus 0000:02: resource 2 [mem 0x80a00000-0x80cfffff pref]
[    0.217508] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[    0.217511] pci_bus 0000:03: resource 1 [mem 0x80600000-0x807fffff]
[    0.217514] pci_bus 0000:03: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
[    0.217517] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.217519] pci_bus 0000:05: resource 1 [mem 0x80100000-0x803fffff]
[    0.217522] pci_bus 0000:05: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.217525] pci_bus 0000:08: resource 0 [io  0x3000-0x3fff]
[    0.217528] pci_bus 0000:08: resource 1 [mem 0xf0200000-0xf02fffff]
[    0.217531] pci_bus 0000:08: resource 2 [mem 0x84000000-0x8bffffff pref]
[    0.217534] pci_bus 0000:08: resource 4 [io  0x0000-0xffff]
[    0.217536] pci_bus 0000:08: resource 5 [mem 0x00000000-0xfffffffff]
[    0.217539] pci_bus 0000:09: resource 0 [io  0x3c00-0x3cff]
[    0.217542] pci_bus 0000:09: resource 1 [io  0x3800-0x38ff]
[    0.217545] pci_bus 0000:09: resource 2 [mem 0x88000000-0x8bffffff pref]
[    0.217547] pci_bus 0000:09: resource 3 [mem 0x94000000-0x97ffffff]
[    0.217550] pci_bus 0000:0d: resource 0 [io  0x3400-0x34ff]
[    0.217553] pci_bus 0000:0d: resource 1 [io  0x3000-0x30ff]
[    0.217556] pci_bus 0000:0d: resource 2 [mem 0x84000000-0x87ffffff pref]
[    0.217558] pci_bus 0000:0d: resource 3 [mem 0x90000000-0x93ffffff]
[    0.217635] NET: Registered protocol family 2
[    0.217762] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.218575] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.220941] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.221708] TCP: Hash tables configured (established 262144 bind 65536)
[    0.221711] TCP reno registered
[    0.221718] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.221751] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.221931] NET: Registered protocol family 1
[    0.221960] pci 0000:00:02.0: Boot video device
[    0.222180] PCI: CLS 64 bytes, default 64
[    0.222250] Unpacking initramfs...
[    0.520341] Freeing initrd memory: 11964k freed
[    0.526889] Simple Boot Flag at 0x37 set to 0x1
[    0.527537] audit: initializing netlink socket (disabled)
[    0.527558] type=2000 audit(1364557822.520:1): initialized
[    0.548921] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.549478] VFS: Disk quotas dquot_6.5.2
[    0.549516] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.549606] msgmni has been set to 3999
[    0.549814] alg: No test for stdrng (krng)
[    0.549852] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.549857] io scheduler noop registered
[    0.549859] io scheduler deadline registered
[    0.549878] io scheduler cfq registered (default)
[    0.549993] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.550057] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.550147] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.550201] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.550286] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.550340] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.550460] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.550487] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.550489] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.550775] acpiphp: Slot [1] registered
[    0.550903] intel_idle: does not run on family 6 model 15
[    0.550942] ERST: Table is not found!
[    0.550944] GHES: HEST is not enabled!
[    0.551024] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.616586] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[    0.637393] 00:04: ttyS0 at I/O 0x220 (irq = 4) is a 16550A
[    0.637830] Linux agpgart interface v0.103
[    0.637913] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    0.638003] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    0.639213] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    0.639371] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    0.639539] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.641657] i8042: Detected active multiplexing controller, rev 1.1
[    0.643039] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.643048] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    0.643088] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    0.643121] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    0.643157] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    0.643324] mousedev: PS/2 mouse device common for all mice
[    0.643386] rtc_cmos 00:06: RTC can wake from S4
[    0.643532] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.643567] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.643580] cpuidle: using governor ladder
[    0.643582] cpuidle: using governor menu
[    0.643819] TCP cubic registered
[    0.643877] NET: Registered protocol family 10
[    0.644432] Mobile IPv6
[    0.644435] NET: Registered protocol family 17
[    0.644440] Registering the dns_resolver key type
[    0.644600] PM: Hibernation image not present or could not be loaded.
[    0.644615] registered taskstats version 1
[    0.645286] rtc_cmos 00:06: setting system clock to 2013-03-29 11:50:23 UTC (1364557823)
[    0.645335] Initializing network drop monitor service
[    0.646728] Freeing unused kernel memory: 576k freed
[    0.646897] Write protecting the kernel read-only data: 6144k
[    0.649763] Freeing unused kernel memory: 672k freed
[    0.652842] Freeing unused kernel memory: 704k freed
[    0.677769] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.730185] udevd[52]: starting version 175
[    0.776370] sky2: driver version 1.30
[    0.776438] sky2 0000:02:00.0: setting latency timer to 64
[    0.776477] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 2
[    0.776609] sky2 0000:02:00.0: irq 43 for MSI/MSI-X
[    0.785465] sdhci: Secure Digital Host Controller Interface driver
[    0.785468] sdhci: Copyright(c) Pierre Ossman
[    0.785756] sdhci-pci 0000:08:03.2: SDHCI controller found [1217:7120] (rev 0)
[    0.785802] mmc0: Unknown controller version (16). You may experience problems.
[    0.785889] mmc0: no vmmc regulator found
[    0.785930] Registered led device: mmc0::
[    0.787413] sky2 0000:02:00.0: eth0: addr 00:17:42:41:a8:2d
[    0.788915] SCSI subsystem initialized
[    0.797391] usbcore: registered new interface driver usbfs
[    0.797428] usbcore: registered new interface driver hub
[    0.809426] usbcore: registered new device driver usb
[    0.809927] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.809991] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.809996] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.810026] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.810050] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.810064] ehci_hcd 0000:00:1d.7: debug port 1
[    0.813940] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.814626] libata version 3.00 loaded.
[    0.816422] mmc0: SDHCI controller on PCI [0000:08:03.2] using PIO
[    0.816566] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0644000
[    0.824551] uhci_hcd: USB Universal Host Controller Interface driver
[    0.831881] thermal LNXTHERM:00: registered as thermal_zone0
[    0.831885] ACPI: Thermal Zone [TZ00] (27 C)
[    0.845908] thermal LNXTHERM:01: registered as thermal_zone1
[    0.845913] ACPI: Thermal Zone [TZ01] (27 C)
[    0.848396] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.848438] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.848442] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.848445] usb usb1: Product: EHCI Host Controller
[    0.848447] usb usb1: Manufacturer: Linux 3.2.39 ehci_hcd
[    0.848450] usb usb1: SerialNumber: 0000:00:1d.7
[    0.848618] hub 1-0:1.0: USB hub found
[    0.848626] hub 1-0:1.0: 8 ports detected
[    0.848771] ahci 0000:00:1f.2: version 3.0
[    0.848864] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    0.848949] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[    0.848954] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[    0.848960] ahci 0000:00:1f.2: setting latency timer to 64
[    0.850108] scsi0 : ahci
[    0.850369] scsi1 : ahci
[    0.850459] scsi2 : ahci
[    0.850539] scsi3 : ahci
[    0.850705] ata1: SATA max UDMA/133 abar m1024@0xf0644400 port 0xf0644500 irq 44
[    0.850708] ata2: DUMMY
[    0.850711] ata3: SATA max UDMA/133 abar m1024@0xf0644400 port 0xf0644600 irq 44
[    0.850714] ata4: DUMMY
[    0.850790] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.850795] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.850809] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.850843] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[    0.850894] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.850898] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.850900] usb usb2: Product: UHCI Host Controller
[    0.850903] usb usb2: Manufacturer: Linux 3.2.39 uhci_hcd
[    0.850905] usb usb2: SerialNumber: 0000:00:1d.0
[    0.851052] hub 2-0:1.0: USB hub found
[    0.851058] hub 2-0:1.0: 2 ports detected
[    0.851164] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.851168] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.851177] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.851221] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
[    0.851263] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.851266] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.851269] usb usb3: Product: UHCI Host Controller
[    0.851271] usb usb3: Manufacturer: Linux 3.2.39 uhci_hcd
[    0.851273] usb usb3: SerialNumber: 0000:00:1d.1
[    0.851398] hub 3-0:1.0: USB hub found
[    0.851403] hub 3-0:1.0: 2 ports detected
[    0.851502] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.851506] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.851518] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.851559] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    0.851600] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.851603] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.851606] usb usb4: Product: UHCI Host Controller
[    0.851608] usb usb4: Manufacturer: Linux 3.2.39 uhci_hcd
[    0.851610] usb usb4: SerialNumber: 0000:00:1d.2
[    0.851738] hub 4-0:1.0: USB hub found
[    0.851743] hub 4-0:1.0: 2 ports detected
[    0.851848] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.851852] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.851861] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.851893] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[    0.851937] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.851940] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.851943] usb usb5: Product: UHCI Host Controller
[    0.851945] usb usb5: Manufacturer: Linux 3.2.39 uhci_hcd
[    0.851947] usb usb5: SerialNumber: 0000:00:1d.3
[    0.852135] hub 5-0:1.0: USB hub found
[    0.852140] hub 5-0:1.0: 2 ports detected
[    0.853199] ata_piix 0000:00:1f.1: version 2.13
[    0.853255] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.853684] scsi4 : ata_piix
[    0.853975] scsi5 : ata_piix
[    0.854496] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    0.854500] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    0.856960] ata6: port disabled--ignoring
[    1.020408] ata5.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.31, max UDMA/33
[    1.036308] ata5.00: configured for UDMA/33
[    1.072573] mmc0: new SDHC card at address b368
[    1.074452] mmcblk0: mmc0:b368 00000 15.0 GiB
[    1.076934]  mmcblk0: p1
[    1.160028] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[    1.172040] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.172068] ata3: SATA link down (SStatus 0 SControl 300)
[    1.172336] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.172341] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.172429] ata1.00: ATA-8: INTEL SSDSC2MH120A2, PPG4, max UDMA/133
[    1.172433] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.172734] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.172738] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.172826] ata1.00: configured for UDMA/133
[    1.172965] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2MH12 PPG4 PQ: 0 ANSI: 5
[    1.175086] scsi 4:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-841S  1.31 PQ: 0 ANSI: 5
[    1.183535] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.183617] sd 0:0:0:0: [sda] Write Protect is off
[    1.183620] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.183646] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.185716]  sda: sda1 sda2 sda3
[    1.185717]  sda3: <openbsd: sda5 sda6 sda7 >
[    1.186324] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.191400] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.192890] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.192894] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.193035] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    1.193183] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.294135] usb 1-4: New USB device found, idVendor=0409, idProduct=0058
[    1.294139] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.294142] usb 1-4: Product: USB2.0 Hub Controller
[    1.294144] usb 1-4: Manufacturer: NEC Corporation
[    1.294609] hub 1-4:1.0: USB hub found
[    1.296757] hub 1-4:1.0: 4 ports detected
[    1.524017] Refined TSC clocksource calibration: 1994.999 MHz.
[    1.524022] Switching to clocksource tsc
[    1.694419] microcode: CPU0 sig=0x6f6, pf=0x20, revision=0xc7
[    1.696933] platform microcode: firmware: agent loaded intel-ucode/06-0f-06 into memory
[    1.697160] microcode: CPU0 updated to revision 0xd1, date = 2010-10-01
[    1.697172] microcode: CPU1 sig=0x6f6, pf=0x20, revision=0xc7
[    1.699453] platform microcode: firmware: agent loaded intel-ucode/06-0f-06 into memory
[    1.699682] microcode: CPU1 updated to revision 0xd1, date = 2010-10-01
[    1.699783] microcode: Microcode Update Driver: v2.00 <[hidden email]>, Peter Oruba
[    1.707773] device-mapper: uevent: version 1.0.3
[    1.707849] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [hidden email]
[    1.760023] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    1.935608] usb 4-1: New USB device found, idVendor=0c24, idProduct=000f
[    1.935612] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.176011] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[    2.339601] usb 4-2: New USB device found, idVendor=08ff, idProduct=2580
[    2.339605] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.339607] usb 4-2: Product: Fingerprint Sensor
[    2.428136] usb 1-4.2: new full-speed USB device number 5 using ehci_hcd
[    2.536508] usb 1-4.2: New USB device found, idVendor=067b, idProduct=2303
[    2.536511] usb 1-4.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.624132] usb 1-4.4: new high-speed USB device number 6 using ehci_hcd
[    2.732383] usb 1-4.4: New USB device found, idVendor=0424, idProduct=2514
[    2.732387] usb 1-4.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.732830] hub 1-4.4:1.0: USB hub found
[    2.732882] hub 1-4.4:1.0: 4 ports detected
[    3.004135] usb 1-4.4.2: new high-speed USB device number 7 using ehci_hcd
[    3.101008] usb 1-4.4.2: New USB device found, idVendor=0566, idProduct=3021
[    3.101012] usb 1-4.4.2: New USB device strings: Mfr=10, Product=11, SerialNumber=0
[    3.101015] usb 1-4.4.2: Product: USB 2.0 HUB
[    3.101017] usb 1-4.4.2: Manufacturer: GENESYS
[    3.101425] hub 1-4.4.2:1.0: USB hub found
[    3.102008] hub 1-4.4.2:1.0: 4 ports detected
[    3.372260] usb 1-4.4.2.1: new low-speed USB device number 8 using ehci_hcd
[    3.468382] usb 1-4.4.2.1: New USB device found, idVendor=046d, idProduct=c016
[    3.468385] usb 1-4.4.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.468388] usb 1-4.4.2.1: Product: Optical USB Mouse
[    3.468390] usb 1-4.4.2.1: Manufacturer: Logitech
[    3.473969] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4.2/1-4.4.2.1/1-4.4.2.1:1.0/input/input1
[    3.474073] generic-usb 0003:046D:C016.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.7-4.4.2.1/input0
[    3.474091] usbcore: registered new interface driver usbhid
[    3.474093] usbhid: USB HID core driver
[    3.540262] usb 1-4.4.2.3: new low-speed USB device number 9 using ehci_hcd
[    3.637136] usb 1-4.4.2.3: New USB device found, idVendor=0566, idProduct=3108
[    3.637139] usb 1-4.4.2.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.641014] input: HID 0566:3108 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4.2/1-4.4.2.3/1-4.4.2.3:1.0/input/input2
[    3.641102] generic-usb 0003:0566:3108.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 0566:3108] on usb-0000:00:1d.7-4.4.2.3/input0
[    3.644868] input: HID 0566:3108 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4.2/1-4.4.2.3/1-4.4.2.3:1.1/input/input3
[    3.644944] generic-usb 0003:0566:3108.0003: input,hidraw2: USB HID v1.10 Device [HID 0566:3108] on usb-0000:00:1d.7-4.4.2.3/input1
[    3.716263] usb 1-4.4.2.4: new full-speed USB device number 10 using ehci_hcd
[    3.809257] usb 1-4.4.2.4: New USB device found, idVendor=0d8c, idProduct=0105
[    3.809261] usb 1-4.4.2.4: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[    3.809264] usb 1-4.4.2.4: Product: USB Multimedia Audio Device
[    3.809266] usb 1-4.4.2.4: Manufacturer: C-Media Electronics Inc.
[    3.810194] input: C-Media Electronics Inc. USB Multimedia Audio Device as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4.2/1-4.4.2.4/1-4.4.2.4:1.3/input/input4
[    3.810370] generic-usb 0003:0D8C:0105.0004: input,hidraw3: USB HID v1.00 Device [C-Media Electronics Inc. USB Multimedia Audio Device] on usb-0000:00:1d.7-4.4.2.4/input3
[   16.046034] PM: Starting manual resume from disk
[   16.046037] PM: Hibernation image partition 254:1 present
[   16.046039] PM: Looking for hibernation image.
[   16.046213] PM: Image not found (code -22)
[   16.046215] PM: Hibernation image not present or could not be loaded.
[   16.060077] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   16.441838] udevd[472]: starting version 175
[   16.539576] ACPI: Requesting acpi_cpufreq
[   16.539984] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[   16.540066] ACPI: Lid Switch [LID]
[   16.540136] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[   16.540141] ACPI: Power Button [PWRB]
[   16.540203] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[   16.540207] ACPI: Sleep Button [SLPB]
[   16.546168] Marking TSC unstable due to TSC halts in idle
[   16.546190] ACPI: acpi_idle registered with cpuidle
[   16.548047] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[   16.548055] ACPI: Power Button [PWRF]
[   16.558469] Switching to clocksource hpet
[   16.577127] ACPI: Battery Slot [CMB1] (battery present)
[   16.577160] ACPI: Battery Slot [CMB2] (battery absent)
[   16.582819] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/FUJ02B1:00/input/input9
[   16.582832] fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on)
[   16.583246] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input10
[   16.583251] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
[   16.583442] fujitsu_laptop: BTNI: [0xf0001]
[   16.583550] fujitsu_laptop: driver 0.6.0 successfully loaded
[   16.589045] ACPI: AC Adapter [AC] (on-line)
[   16.593749] acpi device:01: registered as cooling_device2
[   16.593861] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11
[   16.593870] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   16.636606] intel_rng: FWH not detected
[   16.636852] [drm] Initialized drm 1.1.0 20060810
[   16.666622] yenta_cardbus 0000:08:03.0: CardBus bridge found [10cf:131e]
[   16.666649] yenta_cardbus 0000:08:03.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
[   16.704516] iTCO_vendor_support: vendor-support=0
[   16.716886] i915 0000:00:02.0: setting latency timer to 64
[   16.755913] cfg80211: Calling CRDA to update world regulatory domain
[   16.759763] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   16.759766] [drm] Driver supports precise vblank timestamp query.
[   16.759776] [drm:init_vbt_defaults], Set default to SSC at 100MHz
[   16.759807] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 96 display_clock_mode 0
[   16.759813] [drm:parse_general_definitions], crt_ddc_bus_pin: 2
[   16.759820] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[   16.759823] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[   16.759829] [drm:parse_lfp_panel_data], VBT initial LVDS value 40300300
[   16.759834] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[   16.759837] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[   16.759842] [drm:parse_sdvo_device_mapping], the SDVO device with slave addr 70 is found on SDVOB port
[   16.759846] [drm:parse_sdvo_device_mapping], SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5
[   16.759859] [drm:intel_dsm_pci_probe], no _DSM method for intel device
[   16.759882] [drm:intel_modeset_init], 2 display pipes available.
[   16.759889] [drm:intel_crtc_init], swapping pipes & planes for FBC
[   16.759894] [drm:intel_modeset_init], plane 0 init failed: -19
[   16.759899] [drm:intel_crtc_init], swapping pipes & planes for FBC
[   16.759903] [drm:intel_modeset_init], plane 1 init failed: -19
[   16.759910] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   16.760697] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus panel
[   16.760967] [drm:intel_setup_outputs], probing SDVOB
[   16.793993] yenta_cardbus 0000:08:03.0: ISA IRQ mask 0x0cb8, PCI irq 16
[   16.793998] yenta_cardbus 0000:08:03.0: Socket status: 30000006
[   16.794002] pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #09 to #0c
[   16.794012] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
[   16.794016] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [mem 0xf0200000-0xf02fffff]
[   16.794020] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf0200000-0xf02fffff: excluding 0xf0200000-0xf020ffff
[   16.794039] yenta_cardbus 0000:08:03.0: pcmcia: parent PCI bridge window: [mem 0x84000000-0x8bffffff pref]
[   16.794043] pcmcia_socket pcmcia_socket0: cs: memory probe 0x84000000-0x8bffffff: excluding 0x84000000-0x8bffffff
[   16.804316] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[   16.804427] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[   16.806599] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   16.816096] yenta_cardbus 0000:08:03.1: CardBus bridge found [10cf:131e]
[   16.832153] input: PC Speaker as /devices/platform/pcspkr/input/input12
[   16.870753] leds_ss4200: no LED devices found
[   16.872513] [drm:intel_sdvo_debug_write], SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
[   16.874942] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 02 43 00 01 01 01 01 00
[   16.887713] [drm:intel_sdvo_get_capabilities], SDVO capabilities:
[   16.887718]   vendor_id: 2
[   16.887719]   device_id: 67
[   16.887719]   device_rev_id: 0
[   16.887720]   sdvo_version_major: 1
[   16.887721]   sdvo_version_minor: 1
[   16.887722]   sdvo_inputs_mask: 1
[   16.887723]   smooth_scaling: 0
[   16.887724]   sharp_scaling: 0
[   16.887724]   up_scaling: 0
[   16.887725]   down_scaling: 0
[   16.887726]   stall_support: 0
[   16.887727]   output_flags: 1
[   16.887918] [drm:intel_sdvo_debug_write], SDVOB: W: 9D                         (SDVO_CMD_GET_SUPP_ENCODE)
[   16.889525] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
[   16.891146] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
[   16.894253] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   16.896150] [drm:intel_sdvo_debug_write], SDVOB: W: 1D                         (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
[   16.898442] [drm:intel_sdvo_read_response], SDVOB: R: (Success) C4 09 20 4E
[   16.906558] [drm:intel_sdvo_init], SDVOB device VID/DID: 02:43.00, clock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
[   16.906565] [drm:intel_setup_outputs], probing SDVOC
[   16.907024] [drm:intel_sdvo_read_byte], i2c transfer returned -6
[   16.907028] [drm:intel_sdvo_init], No SDVO device found on SDVOC
[   16.922372] Bluetooth: Core ver 2.16
[   16.922396] NET: Registered protocol family 31
[   16.922399] Bluetooth: HCI device and connection manager initialized
[   16.922402] Bluetooth: HCI socket layer initialized
[   16.922404] Bluetooth: L2CAP socket layer initialized
[   16.922412] Bluetooth: SCO socket layer initialized
[   16.930435] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[   16.930439] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[   16.930532] iwl3945 0000:05:00.0: setting latency timer to 64
[   16.940063] Bluetooth: Generic Bluetooth USB driver ver 0.6
[   16.940868] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[   16.940916] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   16.940966] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   16.945346] yenta_cardbus 0000:08:03.1: ISA IRQ mask 0x0cb8, PCI irq 16
[   16.945350] yenta_cardbus 0000:08:03.1: Socket status: 30000410
[   16.945354] pci_bus 0000:08: Raising subordinate bus# of parent bus (#08) from #0c to #10
[   16.945364] yenta_cardbus 0000:08:03.1: pcmcia: parent PCI bridge window: [io  0x3000-0x3fff]
[   16.945368] yenta_cardbus 0000:08:03.1: pcmcia: parent PCI bridge window: [mem 0xf0200000-0xf02fffff]
[   16.945371] pcmcia_socket pcmcia_socket1: cs: memory probe 0xf0200000-0xf02fffff: excluding 0xf0200000-0xf020ffff
[   16.945389] yenta_cardbus 0000:08:03.1: pcmcia: parent PCI bridge window: [mem 0x84000000-0x8bffffff pref]
[   16.945393] pcmcia_socket pcmcia_socket1: cs: memory probe 0x84000000-0x8bffffff: excluding 0x84000000-0x8bffffff
[   16.949680] usbcore: registered new interface driver btusb
[   16.986774] iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[   16.986778] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
[   16.986936] iwl3945 0000:05:00.0: irq 45 for MSI/MSI-X
[   16.987101] Registered led device: phy0-led
[   16.990697] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff
[   16.990735] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[   16.990773] pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[   17.021803] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[   17.103228] usbcore: registered new interface driver usbserial
[   17.103243] USB Serial support registered for generic
[   17.103313] usbcore: registered new interface driver usbserial_generic
[   17.103315] usbserial: USB Serial Driver core
[   17.109033] USB Serial support registered for pl2303
[   17.109062] pl2303 1-4.2:1.0: pl2303 converter detected
[   17.111119] usb 1-4.2: pl2303 converter now attached to ttyUSB0
[   17.111146] usbcore: registered new interface driver pl2303
[   17.111149] pl2303: Prolific PL2303 USB to serial adaptor driver
[   17.127092] usbcore: registered new interface driver snd-usb-audio
[   17.153313] cfg80211: World regulatory domain updated:
[   17.153317] cfg80211:     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   17.153321] cfg80211:     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.153324] cfg80211:     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.153328] cfg80211:     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.153331] cfg80211:     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.153334] cfg80211:     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.420046] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   17.422993] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.423933] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[   17.423946] [drm:intel_update_fbc],
[   17.423952] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   17.423959] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   17.423965] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[   17.423971] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[   17.423978] [drm:i9xx_update_wm], memory self refresh disabled
[   17.423987] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[   17.438882] [drm:intel_update_fbc],
[   17.438887] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   17.438893] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   17.438899] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[   17.438905] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[   17.438912] [drm:i9xx_update_wm], memory self refresh disabled
[   17.443846] [drm] initialized overlay support
[   17.443876] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   17.446825] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.447834] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[   17.447845] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[   17.447853] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[   17.447864] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
[   17.460055] [drm:intel_crt_detect], CRT detected via hotplug
[   17.488572] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[   17.488586] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes :
[   17.488593] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   17.488604] [drm:drm_mode_debug_printmodeline], Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[   17.488614] [drm:drm_mode_debug_printmodeline], Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[   17.488624] [drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[   17.488634] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   17.488644] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   17.488655] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   17.488665] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   17.488674] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   17.488684] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   17.488695] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DVI-D-1]
[   17.488701] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[   17.490305] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[   17.493914] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[   17.493987] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   17.497255] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   17.527029] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   17.530190] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   17.559899] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[   17.559948] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DVI-D-1] probed modes :
[   17.559955] [drm:drm_mode_debug_printmodeline], Modeline 41:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   17.559965] [drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[   17.559976] [drm:drm_mode_debug_printmodeline], Modeline 44:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[   17.559986] [drm:drm_mode_debug_printmodeline], Modeline 45:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[   17.559996] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   17.560027] [drm:drm_mode_debug_printmodeline], Modeline 42:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   17.560037] [drm:drm_mode_debug_printmodeline], Modeline 50:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   17.560047] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   17.560056] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   17.560066] [drm:drm_mode_debug_printmodeline], Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   17.560077] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1]
[   17.560085] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   17.560092] [drm:intel_get_load_detect_pipe], creating tmp fb for load-detection
[   17.560108] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[   17.560117] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   17.562993] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.564070] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[   17.564073] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[   17.613846] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 5120
[   17.613856] [drm:intel_update_fbc],
[   17.613863] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   17.613870] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   17.613876] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[   17.613881] [drm:intel_calculate_wm], FIFO watermark level: -5
[   17.613887] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[   17.613893] [drm:i9xx_update_wm], self-refresh entries: 80
[   17.613898] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[   17.613906] [drm:i9xx_update_wm], memory self refresh enabled
[   17.613913] [drm:drm_crtc_helper_set_mode], [ENCODER:14:TV-14] set [MODE:0:NTSC 480i]
[   17.623869] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   17.623875] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   17.623881] [drm:intel_calculate_wm], FIFO entries required for mode: 34
[   17.623887] [drm:intel_calculate_wm], FIFO watermark level: -5
[   17.623892] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[   17.623898] [drm:i9xx_update_wm], self-refresh entries: 80
[   17.623903] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[   17.623911] [drm:i9xx_update_wm], memory self refresh enabled
[   17.624400] [drm:intel_update_fbc],
[   17.637004] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x202000/0x0
[   17.664053] [drm:intel_tv_detect_type], TV detected: c0007, 7f0000aa
[   17.664060] [drm:intel_tv_detect_type], Unrecognised TV connection
[   17.674868] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[   17.696073] [drm:intel_release_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   17.696093] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   17.699013] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.699952] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[   17.739916] [drm:intel_update_fbc],
[   17.739922] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   17.739929] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   17.739935] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 29
[   17.739941] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[   17.739948] [drm:i9xx_update_wm], memory self refresh disabled
[   17.741733] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1] disconnected
[   17.741741] [drm:drm_setup_crtcs],
[   17.741747] [drm:drm_enable_connectors], connector 5 enabled? yes
[   17.741753] [drm:drm_enable_connectors], connector 9 enabled? yes
[   17.741758] [drm:drm_enable_connectors], connector 12 enabled? yes
[   17.741764] [drm:drm_enable_connectors], connector 13 enabled? no
[   17.741770] [drm:drm_target_preferred], looking for cmdline mode on connector 5
[   17.741776] [drm:drm_target_preferred], looking for preferred mode on connector 5
[   17.741782] [drm:drm_target_preferred], found mode 1024x768
[   17.741788] [drm:drm_target_preferred], looking for cmdline mode on connector 9
[   17.741793] [drm:drm_target_preferred], looking for preferred mode on connector 9
[   17.741799] [drm:drm_target_preferred], found mode 1920x1200
[   17.741804] [drm:drm_target_preferred], looking for cmdline mode on connector 12
[   17.741810] [drm:drm_target_preferred], looking for preferred mode on connector 12
[   17.741816] [drm:drm_target_preferred], found mode 1920x1200
[   17.741821] [drm:drm_setup_crtcs], picking CRTCs for 4096x4096 config
[   17.741834] [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 3
[   17.741843] [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 4
[   17.760763] [drm:intelfb_create], allocated 1920x1200 fb: 0x00020000, bo ffff88007be3fc00
[   17.760901] fbcon: inteldrmfb (fb0) is primary device
[   17.762580] [drm:drm_crtc_helper_set_config],
[   17.762582] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[   17.762593] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[   17.762596] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[   17.762599] [drm:drm_mode_debug_printmodeline], Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[   17.762603] [drm:drm_mode_debug_printmodeline], Modeline 51:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   17.762608] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[   17.762611] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[   17.762614] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   17.762617] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[   17.762619] [drm:drm_mode_debug_printmodeline], Modeline 51:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   17.762627] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[   17.762634] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   17.765491] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.766546] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[   17.766548] [drm:drm_mode_debug_printmodeline], Modeline 51:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   17.804060] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 7680
[   17.804069] [drm:intel_update_fbc],
[   17.804074] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   17.804079] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   17.804085] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   17.804089] [drm:intel_calculate_wm], FIFO watermark level: -20
[   17.804094] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[   17.804098] [drm:i9xx_update_wm], self-refresh entries: 120
[   17.804103] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[   17.804109] [drm:i9xx_update_wm], memory self refresh enabled
[   17.804114] [drm:drm_crtc_helper_set_mode], [ENCODER:10:DAC-10] set [MODE:51:1920x1200]
[   17.804121] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   17.804126] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   17.804131] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   17.804135] [drm:intel_calculate_wm], FIFO watermark level: -20
[   17.804139] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 1
[   17.804144] [drm:i9xx_update_wm], self-refresh entries: 120
[   17.804148] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[   17.804154] [drm:i9xx_update_wm], memory self refresh enabled
[   17.805041] [drm:intel_update_fbc],
[   17.805048] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[   17.805053] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] set DPMS on
[   17.805062] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   17.807972] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.808927] [drm:drm_crtc_helper_set_config],
[   17.808931] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:53] #connectors=1 (x y) (0 0)
[   17.809007] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[   17.809012] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[   17.809016] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[   17.809024] [drm:drm_mode_debug_printmodeline], Modeline 52:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   17.809033] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[   17.809039] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   17.809044] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[   17.809049] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:4]
[   17.809054] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[   17.809059] [drm:drm_mode_debug_printmodeline], Modeline 52:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   17.809070] [drm:drm_crtc_helper_set_mode], [CRTC:4]
[   17.809075] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   17.811983] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.813222] [drm:i9xx_crtc_mode_set], Mode for pipe B:
[   17.813226] [drm:drm_mode_debug_printmodeline], Modeline 52:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   17.844086] pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
[   17.844095] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c8000-0x0cbfff: excluding 0xc8000-0xcbfff
[   17.851489] pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dbfff:
[   17.852102] [drm:i9xx_update_plane], Writing base 00020000 00000000 0 0 7680
[   17.852119] [drm:intel_update_fbc],
[   17.852126] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   17.852131] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   17.852136] [drm:intel_calculate_wm], FIFO watermark level: -23
[   17.852142] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   17.852146] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   17.852151] [drm:intel_calculate_wm], FIFO watermark level: -20
[   17.852155] [drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 1
[   17.852162] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 1, C: 2, SR 1
[   17.852171] [drm:i9xx_update_wm], memory self refresh disabled
[   17.852176] [drm:drm_crtc_helper_set_mode], [ENCODER:11:TMDS-11] set [MODE:52:1920x1200]
[   17.852182] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00             (SDVO_CMD_SET_IN_OUT_MAP)
[   17.855442]  excluding 0xd0000-0xd3fff
[   17.858822] pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff:
[   17.862735] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.865066] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
[   17.872358] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.874657] [drm:intel_sdvo_debug_write], SDVOB: W: 16 28 3C 80 A0 70 B0 23 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
[   17.876971]  clean.
[   17.876974] pcmcia_socket pcmcia_socket1: cs: memory probe 0xf0210000-0xf02fffff:
[   17.891973] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.894324] [drm:intel_sdvo_debug_write], SDVOB: W: 17 30 20 36 00 1A 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
[   17.896221]  excluding 0xf02fe000-0xf030bfff
[   17.896856] pcmcia 1.0: pcmcia: registering new device pcmcia1.0 (IRQ: 16)
[   17.903221] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.904137] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
[   17.906338] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.907242] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00                      (SDVO_CMD_SET_ENCODE)
[   17.909449] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
[   17.910354] [drm:intel_sdvo_debug_write], SDVOB: W: 14 28 3C 80 A0 70 B0 23 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
[   17.917063] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.917975] [drm:intel_sdvo_debug_write], SDVOB: W: 15 30 20 36 00 1A 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
[   17.924693] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.925598] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01                      (SDVO_CMD_SET_CLOCK_RATE_MULT)
[   17.927790] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.928711] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   17.928714] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   17.928716] [drm:intel_calculate_wm], FIFO watermark level: -23
[   17.928718] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   17.928721] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   17.928723] [drm:intel_calculate_wm], FIFO watermark level: -20
[   17.928725] [drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 1
[   17.928727] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 1, C: 2, SR 1
[   17.928730] [drm:i9xx_update_wm], memory self refresh disabled
[   17.929216] [drm:intel_update_fbc],
[   17.952074] [drm:intel_sdvo_debug_write], SDVOB: W: 03                         (SDVO_CMD_GET_TRAINED_INPUTS)
[   17.953669] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
[   17.955523] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   17.958449] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   17.959395] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[   17.959401] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] set DPMS on
[   17.959520] [drm:drm_crtc_helper_set_config],
[   17.959524] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[   17.959541] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   17.959547] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:4]
[   17.959553] [drm:drm_crtc_helper_set_config],
[   17.959556] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:53] #connectors=1 (x y) (0 0)
[   17.959567] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   17.959573] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:4]
[   17.978133] Console: switching to colour frame buffer device 240x75
[   17.978162] [drm:drm_crtc_helper_set_config],
[   17.978166] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[   17.978179] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   17.978184] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:4]
[   17.978190] [drm:drm_crtc_helper_set_config],
[   17.978194] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:53] #connectors=1 (x y) (0 0)
[   17.978204] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   17.978210] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:4]
[   17.987923] fb0: inteldrmfb frame buffer device
[   17.987925] drm: registered panic notifier
[   17.987933] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   17.988354] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[   17.988360] snd_hda_intel 0000:00:1b.0: power state changed by ACPI to D0
[   17.988444] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[   17.988481] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[   18.000206] input: Fujitsu Application Panel buttons as /devices/pci0000:00/0000:00:1f.3/i2c-9/9-0019/input/input14
[   18.031319] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input15
[   18.320313] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   18.320518] input: HDA Intel Line-out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[   18.320691] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[   18.960854] EXT4-fs (dm-2): re-mounted. Opts: (null)
[   19.027782] EXT4-fs (dm-2): re-mounted. Opts: errors=remount-ro
[   19.228548] fuse init (API version 7.17)
[   19.251305] loop: module loaded
[   19.710414] Adding 999420k swap on /dev/mapper/adams-swap.  Priority:-1 extents:1 across:999420k SS
[   19.861202] kjournald starting.  Commit interval 5 seconds
[   19.861355] EXT3-fs (sda1): using internal journal
[   19.861359] EXT3-fs (sda1): mounted filesystem with ordered data mode
[   20.393989] RPC: Registered named UNIX socket transport module.
[   20.393992] RPC: Registered udp transport module.
[   20.393994] RPC: Registered tcp transport module.
[   20.393996] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   20.404503] FS-Cache: Loaded
[   20.423307] FS-Cache: Netfs 'nfs' registered for caching
[   20.434991] Installing knfsd (copyright (C) 1996 [hidden email]).
[   20.707840] [drm:drm_crtc_helper_set_config],
[   20.707845] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[   20.707867] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   20.707873] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:4]
[   20.707879] [drm:drm_crtc_helper_set_config],
[   20.707882] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:53] #connectors=1 (x y) (0 0)
[   20.707894] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   20.707899] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:4]
[   21.231127] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   21.231131] Bluetooth: BNEP filters: protocol multicast
[   21.239075] Bluetooth: RFCOMM TTY layer initialized
[   21.239081] Bluetooth: RFCOMM socket layer initialized
[   21.239084] Bluetooth: RFCOMM ver 1.11
[   21.546701] lp: driver loaded but no devices found
[   21.560143] ppdev: user-space parallel port driver
[   21.632905] [drm:drm_crtc_helper_set_config],
[   21.632908] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[   21.632925] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   21.632928] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:4]
[   21.632932] [drm:drm_crtc_helper_set_config],
[   21.632933] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:53] #connectors=1 (x y) (0 0)
[   21.632939] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   21.632942] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:4]
[   21.937761] sky2 0000:02:00.0: eth0: enabling interface
[   21.938155] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.966991] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input19
[   22.144354] [drm:drm_crtc_helper_set_config],
[   22.144359] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:53] #connectors=1 (x y) (0 0)
[   22.144384] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   22.144388] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:4]
[   22.144392] [drm:drm_crtc_helper_set_config],
[   22.144394] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:53] #connectors=1 (x y) (0 0)
[   22.144401] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   22.144404] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:4]
[   22.146022] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[   22.146029] [drm:drm_mode_getresources], CRTC[2] CONNECTORS[4] ENCODERS[4]
[   22.146102] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   22.146107] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[   22.146118] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[   22.146122] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[   22.146128] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   22.146399] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[   22.146403] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
[   22.152055] [drm:intel_crt_detect], CRT detected via hotplug
[   22.180782] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[   22.180795] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes :
[   22.180800] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   22.180805] [drm:drm_mode_debug_printmodeline], Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[   22.180810] [drm:drm_mode_debug_printmodeline], Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[   22.180815] [drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[   22.180820] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   22.180825] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   22.180830] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   22.180835] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   22.180840] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   22.180845] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   22.180861] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[   22.180926] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[   22.180931] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DVI-D-1]
[   22.180936] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[   22.182492] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[   22.185284] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[   22.185415] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   22.188533] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   22.217813] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   22.221321] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   22.251290] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[   22.251333] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DVI-D-1] probed modes :
[   22.251337] [drm:drm_mode_debug_printmodeline], Modeline 41:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   22.251342] [drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[   22.251348] [drm:drm_mode_debug_printmodeline], Modeline 44:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[   22.251353] [drm:drm_mode_debug_printmodeline], Modeline 45:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[   22.251358] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   22.251363] [drm:drm_mode_debug_printmodeline], Modeline 42:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   22.251368] [drm:drm_mode_debug_printmodeline], Modeline 50:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   22.251373] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   22.251378] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   22.251383] [drm:drm_mode_debug_printmodeline], Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   22.251394] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[   22.251447] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[   22.251451] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1]
[   22.251456] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   22.251460] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[   22.251468] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1] probed modes :
[   22.251471] [drm:drm_mode_debug_printmodeline], Modeline 57:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[   22.251476] [drm:drm_mode_debug_printmodeline], Modeline 54:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[   22.251481] [drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[   22.251486] [drm:drm_mode_debug_printmodeline], Modeline 55:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[   22.251492] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[   22.251541] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   22.251545] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[   22.251552] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[   22.251555] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[   22.251561] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   22.252165] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[   22.252174] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
[   22.268033] [drm:intel_crt_detect], CRT detected via hotplug
[   22.297343] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[   22.297354] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes :
[   22.297358] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   22.297364] [drm:drm_mode_debug_printmodeline], Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[   22.297369] [drm:drm_mode_debug_printmodeline], Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[   22.297374] [drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[   22.297379] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   22.297384] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   22.297389] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   22.297394] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   22.297399] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   22.297404] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   22.297427] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[   22.299055] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[   22.299060] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DVI-D-1]
[   22.299064] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[   22.300660] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[   22.309682] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[   22.309687] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   22.313121] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   22.342247] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   22.345424] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   22.374616] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[   22.374732] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DVI-D-1] probed modes :
[   22.374738] [drm:drm_mode_debug_printmodeline], Modeline 41:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   22.374743] [drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[   22.374748] [drm:drm_mode_debug_printmodeline], Modeline 44:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[   22.374753] [drm:drm_mode_debug_printmodeline], Modeline 45:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[   22.374758] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   22.374764] [drm:drm_mode_debug_printmodeline], Modeline 42:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   22.374769] [drm:drm_mode_debug_printmodeline], Modeline 50:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   22.374774] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   22.374779] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   22.374783] [drm:drm_mode_debug_printmodeline], Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   22.374803] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[   22.375580] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[   22.375585] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1]
[   22.375591] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   22.375595] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[   22.375606] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1] probed modes :
[   22.375609] [drm:drm_mode_debug_printmodeline], Modeline 57:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[   22.375614] [drm:drm_mode_debug_printmodeline], Modeline 54:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[   22.375619] [drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[   22.375624] [drm:drm_mode_debug_printmodeline], Modeline 55:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[   22.375631] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[   22.391661] [drm:drm_mode_addfb], [FB:58]
[   22.392699] [drm:drm_mode_setcrtc], [CRTC:3]
[   22.392706] [drm:drm_mode_setcrtc], [CONNECTOR:9:VGA-1]
[   22.392709] [drm:drm_mode_setcrtc], [CONNECTOR:12:DVI-D-1]
[   22.392713] [drm:drm_crtc_helper_set_config],
[   22.392715] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:58] #connectors=2 (x y) (0 0)
[   22.392729] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[   22.392732] [drm:drm_mode_debug_printmodeline], Modeline 51:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   22.392737] [drm:drm_mode_debug_printmodeline], Modeline 59:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[   22.392743] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   22.392747] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[   22.392750] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[   22.392754] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[   22.392757] [drm:drm_mode_debug_printmodeline], Modeline 59:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[   22.392763] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[   22.392770] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   22.395652] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   22.423868] [drm:intel_update_fbc],
[   22.423873] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   22.423878] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   22.423881] [drm:intel_calculate_wm], FIFO watermark level: -23
[   22.423884] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   22.423887] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   22.423890] [drm:intel_calculate_wm], FIFO watermark level: 8
[   22.423893] [drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 8
[   22.423896] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 8, C: 2, SR 1
[   22.423900] [drm:i9xx_update_wm], memory self refresh disabled
[   22.424067] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[   22.424070] [drm:drm_mode_debug_printmodeline], Modeline 59:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[   22.452363] [drm:i9xx_update_plane], Writing base 00C00000 00000000 0 0 4096
[   22.452370] [drm:intel_update_fbc],
[   22.460045] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   22.460051] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   22.460054] [drm:intel_calculate_wm], FIFO watermark level: -23
[   22.460057] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   22.460060] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   22.460063] [drm:intel_calculate_wm], FIFO watermark level: 8
[   22.460065] [drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 8
[   22.460069] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 8, C: 2, SR 1
[   22.460072] [drm:i9xx_update_wm], memory self refresh disabled
[   22.460078] [drm:drm_crtc_helper_set_mode], [ENCODER:10:DAC-10] set [MODE:59:1024x768]
[   22.460083] [drm:drm_crtc_helper_set_mode], [ENCODER:11:TMDS-11] set [MODE:59:1024x768]
[   22.460087] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00             (SDVO_CMD_SET_IN_OUT_MAP)
[   22.464231] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   22.465375] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
[   22.468229] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   22.470366] [drm:intel_sdvo_debug_write], SDVOB: W: 16 64 19 00 40 41 00 26 30 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
[   22.477153] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   22.478241] [drm:intel_sdvo_debug_write], SDVOB: W: 17 18 88 36 00 18 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
[   22.485059] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   22.486463] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
[   22.488718] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   22.489802] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00                      (SDVO_CMD_SET_ENCODE)
[   22.492161] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
[   22.493246] [drm:intel_sdvo_debug_write], SDVOB: W: 14 64 19 00 40 41 00 26 30 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
[   22.499986] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   22.500939] [drm:intel_sdvo_debug_write], SDVOB: W: 15 18 88 36 00 18 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
[   22.507732] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   22.508707] [drm:intel_sdvo_debug_write], SDVOB: W: 21 02                      (SDVO_CMD_SET_CLOCK_RATE_MULT)
[   22.510966] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   22.511883] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   22.511888] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   22.511891] [drm:intel_calculate_wm], FIFO watermark level: -23
[   22.511894] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   22.511897] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   22.511900] [drm:intel_calculate_wm], FIFO watermark level: 8
[   22.511903] [drm:i9xx_update_wm], FIFO watermarks - A: 1, B: 8
[   22.511906] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 1, B: 8, C: 2, SR 1
[   22.511910] [drm:i9xx_update_wm], memory self refresh disabled
[   22.512494] [drm:intel_update_fbc],
[   22.536027] [drm:intel_sdvo_debug_write], SDVOB: W: 03                         (SDVO_CMD_GET_TRAINED_INPUTS)
[   22.537593] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
[   22.539411] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   22.542292] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   22.543205] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[   22.543209] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] set DPMS on
[   22.543214] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] set DPMS on
[   22.543229] [drm:i915_get_vblank_timestamp], crtc 1 is disabled
[   22.572941] [drm:intel_update_fbc],
[   22.572947] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   22.572951] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   22.572955] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   22.572958] [drm:intel_calculate_wm], FIFO watermark level: 8
[   22.572960] [drm:i9xx_update_wm], FIFO watermarks - A: 26, B: 8
[   22.572964] [drm:i9xx_update_wm], self-refresh entries: 64
[   22.572966] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 26, B: 8, C: 2, SR 63
[   22.572970] [drm:i9xx_update_wm], memory self refresh enabled
[   22.573117] [drm:drm_mode_setcrtc], [CRTC:4]
[   22.573125] [drm:drm_mode_setcrtc], [CONNECTOR:5:LVDS-1]
[   22.573128] [drm:drm_crtc_helper_set_config],
[   22.573131] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:58] #connectors=1 (x y) (0 0)
[   22.573144] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[   22.573147] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[   22.573150] [drm:drm_mode_debug_printmodeline], Modeline 52:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   22.573155] [drm:drm_mode_debug_printmodeline], Modeline 59:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x0 0xa
[   22.573161] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[   22.573164] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[   22.573167] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   22.573170] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   22.573174] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[   22.573177] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[   22.573180] [drm:drm_mode_debug_printmodeline], Modeline 59:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x0 0xa
[   22.573187] [drm:drm_crtc_helper_set_mode], [CRTC:4]
[   22.573196] [drm:i9xx_get_refclk], using SSC reference clock of 96 MHz
[   22.573341] [drm:i9xx_crtc_mode_set], Mode for pipe B:
[   22.573343] [drm:drm_mode_debug_printmodeline], Modeline 59:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x0 0xa
[   22.612040] [drm:i9xx_update_plane], Writing base 00C00000 00000000 0 0 4096
[   22.612047] [drm:intel_update_fbc],
[   22.612052] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   22.612055] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   22.612058] [drm:intel_calculate_wm], FIFO watermark level: 5
[   22.612061] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   22.612065] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   22.612067] [drm:intel_calculate_wm], FIFO watermark level: 8
[   22.612070] [drm:i9xx_update_wm], FIFO watermarks - A: 5, B: 8
[   22.612073] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 5, B: 8, C: 2, SR 1
[   22.612077] [drm:i9xx_update_wm], memory self refresh disabled
[   22.612082] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:59:1024x768]
[   22.612087] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   22.612090] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   22.612093] [drm:intel_calculate_wm], FIFO watermark level: 5
[   22.612096] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   22.612099] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   22.612102] [drm:intel_calculate_wm], FIFO watermark level: 8
[   22.612104] [drm:i9xx_update_wm], FIFO watermarks - A: 5, B: 8
[   22.612107] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 5, B: 8, C: 2, SR 1
[   22.612111] [drm:i9xx_update_wm], memory self refresh disabled
[   22.612605] [drm:intel_update_fbc],
[   22.612609] [drm:intel_lvds_enable], applying panel-fitter: 8, 0
[   22.620032] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[   22.620037] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on
[   22.931384] iwl3945 0000:05:00.0: firmware: agent loaded iwlwifi-3945-2.ucode into memory
[   22.931390] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
[   23.002182] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   23.877824] [drm:intel_crtc_cursor_set],
[   23.877955] [drm:intel_crtc_cursor_set],
[   24.410743] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[   24.412335] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[   24.415046] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[   24.415051] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   24.418177] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   24.447329] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   24.447334] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[   24.452168] sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control rx
[   24.452445] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   24.464084] [drm:intel_crt_detect], CRT detected via hotplug
[   28.024468] [drm:intel_crt_detect], CRT detected via hotplug
[   28.024474] [drm:output_poll_execute], [CONNECTOR:9:VGA-1] status updated from 1 to 1
[   28.024479] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[   28.026070] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[   28.028886] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[   28.029310] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   28.032556] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   28.062125] [drm:output_poll_execute], [CONNECTOR:12:DVI-D-1] status updated from 1 to 1
[   28.062131] [drm:output_poll_execute], [CONNECTOR:13:SVIDEO-1] status updated from 3 to 3
[   28.285558] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   28.285565] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1]
[   28.285577] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes :
[   28.285581] [drm:drm_mode_debug_printmodeline], Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[   28.285588] [drm:drm_mode_getconnector], [CONNECTOR:5:?]
[   28.285755] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[   28.285759] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
[   28.308045] [drm:intel_crt_detect], CRT detected via hotplug
[   28.336239] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[   28.336254] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] probed modes :
[   28.336258] [drm:drm_mode_debug_printmodeline], Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   28.336264] [drm:drm_mode_debug_printmodeline], Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[   28.336269] [drm:drm_mode_debug_printmodeline], Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[   28.336274] [drm:drm_mode_debug_printmodeline], Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[   28.336279] [drm:drm_mode_debug_printmodeline], Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   28.336284] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   28.336290] [drm:drm_mode_debug_printmodeline], Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   28.336295] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   28.336300] [drm:drm_mode_debug_printmodeline], Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   28.336305] [drm:drm_mode_debug_printmodeline], Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   28.336346] [drm:drm_mode_getconnector], [CONNECTOR:9:?]
[   28.336406] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[   28.336411] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DVI-D-1]
[   28.336416] [drm:intel_sdvo_debug_write], SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[   28.337991] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01 00
[   28.340768] [drm:intel_sdvo_detect], SDVO response 1 0 [1]
[   28.340781] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   28.343912] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   28.373489] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   28.376644] [drm:intel_sdvo_debug_write], SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[   28.406057] [drm:intel_sdvo_connector_matches_edid], connector_is_digital? 1, monitor_is_digital? 1
[   28.407765] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:DVI-D-1] probed modes :
[   28.407770] [drm:drm_mode_debug_printmodeline], Modeline 41:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[   28.407776] [drm:drm_mode_debug_printmodeline], Modeline 46:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[   28.407781] [drm:drm_mode_debug_printmodeline], Modeline 44:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[   28.407786] [drm:drm_mode_debug_printmodeline], Modeline 45:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[   28.407791] [drm:drm_mode_debug_printmodeline], Modeline 43:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[   28.407796] [drm:drm_mode_debug_printmodeline], Modeline 42:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[   28.407801] [drm:drm_mode_debug_printmodeline], Modeline 50:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[   28.407806] [drm:drm_mode_debug_printmodeline], Modeline 47:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[   28.407811] [drm:drm_mode_debug_printmodeline], Modeline 48:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[   28.407816] [drm:drm_mode_debug_printmodeline], Modeline 49:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[   28.407845] [drm:drm_mode_getconnector], [CONNECTOR:12:?]
[   28.407896] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[   28.407900] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1]
[   28.407906] [drm:intel_get_load_detect_pipe], [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[   28.407910] [drm:intel_get_load_detect_pipe], no pipe available for load-detect
[   28.407920] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:SVIDEO-1] probed modes :
[   28.407923] [drm:drm_mode_debug_printmodeline], Modeline 57:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[   28.407928] [drm:drm_mode_debug_printmodeline], Modeline 54:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[   28.407933] [drm:drm_mode_debug_printmodeline], Modeline 56:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[   28.407938] [drm:drm_mode_debug_printmodeline], Modeline 55:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[   28.407944] [drm:drm_mode_getconnector], [CONNECTOR:13:?]
[   28.595235] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   28.854385] sky2 0000:02:00.0: eth0: disabling interface
[   28.864361] sky2 0000:02:00.0: eth0: enabling interface
[   28.864765] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.906844] sky2 0000:02:00.0: eth0: disabling interface
[   28.966938] [drm:intel_update_fbc],
[   28.966947] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   28.966955] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   28.966961] [drm:intel_calculate_wm], FIFO watermark level: 5
[   28.966966] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   28.966973] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   28.966978] [drm:intel_calculate_wm], FIFO watermark level: 8
[   28.966983] [drm:i9xx_update_wm], FIFO watermarks - A: 5, B: 8
[   28.966989] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 5, B: 8, C: 2, SR 1
[   28.966996] [drm:i9xx_update_wm], memory self refresh disabled
[   28.992305] sky2 0000:02:00.0: eth0: enabling interface
[   28.992746] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.059163] [drm:drm_mode_addfb], [FB:59]
[   29.059304] [drm:drm_mode_setcrtc], [CRTC:3]
[   29.059310] [drm:drm_mode_setcrtc], [CONNECTOR:9:VGA-1]
[   29.059314] [drm:drm_mode_setcrtc], [CONNECTOR:12:DVI-D-1]
[   29.059317] [drm:drm_crtc_helper_set_config],
[   29.059319] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:59] #connectors=2 (x y) (0 0)
[   29.059332] [drm:drm_crtc_helper_set_config], modes are different, full mode set
[   29.059335] [drm:drm_mode_debug_printmodeline], Modeline 59:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[   29.059341] [drm:drm_mode_debug_printmodeline], Modeline 60:"" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
[   29.059347] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   29.059351] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   29.059354] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[   29.059358] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[   29.059361] [drm:drm_mode_debug_printmodeline], Modeline 60:"" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
[   29.059368] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[   29.059372] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   29.062255] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.090169] [drm:intel_update_fbc],
[   29.090178] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   29.090184] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   29.090187] [drm:intel_calculate_wm], FIFO watermark level: 5
[   29.090191] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   29.090195] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   29.090197] [drm:intel_calculate_wm], FIFO watermark level: -20
[   29.090200] [drm:i9xx_update_wm], FIFO watermarks - A: 5, B: 1
[   29.090204] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1
[   29.090208] [drm:i9xx_update_wm], memory self refresh disabled
[   29.090372] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[   29.090376] [drm:drm_mode_debug_printmodeline], Modeline 60:"" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
[   29.141374] [drm:i9xx_update_plane], Writing base 03000000 00000000 0 0 8192
[   29.141381] [drm:intel_update_fbc],
[   29.164049] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   29.164055] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   29.164058] [drm:intel_calculate_wm], FIFO watermark level: 5
[   29.164061] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   29.164064] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   29.164067] [drm:intel_calculate_wm], FIFO watermark level: -20
[   29.164070] [drm:i9xx_update_wm], FIFO watermarks - A: 5, B: 1
[   29.164073] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1
[   29.164077] [drm:i9xx_update_wm], memory self refresh disabled
[   29.164082] [drm:drm_crtc_helper_set_mode], [ENCODER:10:DAC-10] set [MODE:60:]
[   29.164087] [drm:drm_crtc_helper_set_mode], [ENCODER:11:TMDS-11] set [MODE:60:]
[   29.164092] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00             (SDVO_CMD_SET_IN_OUT_MAP)
[   29.168294] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.169490] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
[   29.172343] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.182809] [drm:intel_sdvo_debug_write], SDVOB: W: 16 28 3C 80 A0 70 B0 23 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
[   29.189539] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.192934] [drm:intel_sdvo_debug_write], SDVOB: W: 17 30 20 36 00 1A 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
[   29.199661] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.203796] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
[   29.206012] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.207946] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00                      (SDVO_CMD_SET_ENCODE)
[   29.210164] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
[   29.211074] [drm:intel_sdvo_debug_write], SDVOB: W: 14 28 3C 80 A0 70 B0 23 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
[   29.217819] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.219065] [drm:intel_sdvo_debug_write], SDVOB: W: 15 30 20 36 00 1A 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
[   29.225918] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.227054] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01                      (SDVO_CMD_SET_CLOCK_RATE_MULT)
[   29.229362] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.230900] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   29.230906] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   29.230909] [drm:intel_calculate_wm], FIFO watermark level: 5
[   29.230912] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   29.230915] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   29.230918] [drm:intel_calculate_wm], FIFO watermark level: -20
[   29.230921] [drm:i9xx_update_wm], FIFO watermarks - A: 5, B: 1
[   29.230924] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1
[   29.230928] [drm:i9xx_update_wm], memory self refresh disabled
[   29.231853] [drm:intel_update_fbc],
[   29.260036] [drm:intel_sdvo_debug_write], SDVOB: W: 03                         (SDVO_CMD_GET_TRAINED_INPUTS)
[   29.261614] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
[   29.263443] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   29.266333] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.267553] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[   29.267557] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] set DPMS on
[   29.267562] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] set DPMS on
[   29.347475] [drm:intel_crtc_cursor_set],
[   29.347479] [drm:intel_crtc_cursor_set], cursor off
[   29.349018] [drm:drm_mode_addfb], [FB:60]
[   29.349050] [drm:drm_crtc_helper_set_config],
[   29.349053] [drm:drm_crtc_helper_set_config], [CRTC:3] [NOFB]
[   29.349060] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   29.351927] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.353000] [drm:i915_get_vblank_timestamp], crtc 0 is disabled
[   29.384863] [drm:intel_update_fbc],
[   29.384867] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   29.384870] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   29.384873] [drm:intel_calculate_wm], FIFO watermark level: 5
[   29.384876] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   29.384879] [drm:i9xx_update_wm], FIFO watermarks - A: 5, B: 29
[   29.384882] [drm:i9xx_update_wm], self-refresh entries: 64
[   29.384885] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[   29.384889] [drm:i9xx_update_wm], memory self refresh enabled
[   29.392824] [drm:drm_mode_setcrtc], [CRTC:3]
[   29.392832] [drm:drm_mode_setcrtc], [CONNECTOR:9:VGA-1]
[   29.392835] [drm:drm_mode_setcrtc], [CONNECTOR:12:DVI-D-1]
[   29.392838] [drm:drm_crtc_helper_set_config],
[   29.392840] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:60] #connectors=2 (x y) (0 0)
[   29.392851] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set
[   29.392854] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[   29.392857] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch
[   29.392861] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:4]
[   29.392864] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[   29.392867] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] to [CRTC:3]
[   29.392870] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch
[   29.392873] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[   29.392876] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace
[   29.392880] [drm:drm_mode_debug_printmodeline], Modeline 59:"" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
[   29.392886] [drm:drm_crtc_helper_set_mode], [CRTC:3]
[   29.392890] [drm:intel_sdvo_debug_write], SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   29.395729] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.396802] [drm:i9xx_crtc_mode_set], Mode for pipe A:
[   29.396805] [drm:drm_mode_debug_printmodeline], Modeline 59:"" 0 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x0 0x9
[   29.450927] [drm:i9xx_update_plane], Writing base 03000000 00000000 0 0 8192
[   29.450932] [drm:intel_update_fbc],
[   29.450937] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   29.450941] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   29.450944] [drm:intel_calculate_wm], FIFO watermark level: 5
[   29.450946] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   29.450949] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   29.450952] [drm:intel_calculate_wm], FIFO watermark level: -20
[   29.450955] [drm:i9xx_update_wm], FIFO watermarks - A: 5, B: 1
[   29.450958] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1
[   29.450962] [drm:i9xx_update_wm], memory self refresh disabled
[   29.450966] [drm:drm_crtc_helper_set_mode], [ENCODER:10:DAC-10] set [MODE:59:]
[   29.450971] [drm:drm_crtc_helper_set_mode], [ENCODER:11:TMDS-11] set [MODE:59:]
[   29.450975] [drm:intel_sdvo_debug_write], SDVOB: W: 07 01 00 00 00             (SDVO_CMD_SET_IN_OUT_MAP)
[   29.455124] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.456045] [drm:intel_sdvo_debug_write], SDVOB: W: 11 01 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
[   29.458893] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.459810] [drm:intel_sdvo_debug_write], SDVOB: W: 16 28 3C 80 A0 70 B0 23 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
[   29.466523] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.467429] [drm:intel_sdvo_debug_write], SDVOB: W: 17 30 20 36 00 1A 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
[   29.474148] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.475061] [drm:intel_sdvo_debug_write], SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
[   29.477266] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.478172] [drm:intel_sdvo_debug_write], SDVOB: W: 9F 00                      (SDVO_CMD_SET_ENCODE)
[   29.480382] [drm:intel_sdvo_read_response], SDVOB: R: (Not supported)... failed
[   29.481295] [drm:intel_sdvo_debug_write], SDVOB: W: 14 28 3C 80 A0 70 B0 23 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
[   29.488010] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.488916] [drm:intel_sdvo_debug_write], SDVOB: W: 15 30 20 36 00 1A 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
[   29.495630] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.496554] [drm:intel_sdvo_debug_write], SDVOB: W: 21 01                      (SDVO_CMD_SET_CLOCK_RATE_MULT)
[   29.498750] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.499657] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) A: 28
[   29.499661] [drm:intel_calculate_wm], FIFO entries required for mode: 21
[   29.499663] [drm:intel_calculate_wm], FIFO watermark level: 5
[   29.499666] [drm:i9xx_get_fifo_size], FIFO size - (0x00001d9c) B: 31
[   29.499669] [drm:intel_calculate_wm], FIFO entries required for mode: 49
[   29.499672] [drm:intel_calculate_wm], FIFO watermark level: -20
[   29.499675] [drm:i9xx_update_wm], FIFO watermarks - A: 5, B: 1
[   29.499678] [drm:i9xx_update_wm], Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1
[   29.499681] [drm:i9xx_update_wm], memory self refresh disabled
[   29.500568] [drm:intel_update_fbc],
[   29.532061] [drm:intel_sdvo_debug_write], SDVOB: W: 03                         (SDVO_CMD_GET_TRAINED_INPUTS)
[   29.533662] [drm:intel_sdvo_read_response], SDVOB: R: (Success) 01
[   29.535518] [drm:intel_sdvo_debug_write], SDVOB: W: 05 01 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[   29.538457] [drm:intel_sdvo_read_response], SDVOB: R: (Success)
[   29.539406] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on
[   29.539414] [drm:drm_crtc_helper_set_config], [CONNECTOR:9:VGA-1] set DPMS on
[   29.539421] [drm:drm_crtc_helper_set_config], [CONNECTOR:12:DVI-D-1] set DPMS on
[   29.539504] [drm:drm_crtc_helper_set_config],
[   29.539509] [drm:drm_crtc_helper_set_config], [CRTC:4] [NOFB]
[   29.544982] [drm:intel_crtc_cursor_set],
[   29.662024] ACPI Warning: _BQC returned an invalid level (20110623/video-486)
[   32.011073] sky2 0000:02:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control rx
[   32.011410] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Mark Kettenis
In reply to this post by Jonathan Gray-11
> Date: Fri, 29 Mar 2013 13:24:58 +1100
> From: Jonathan Gray <[hidden email]>
>
> On Fri, Mar 29, 2013 at 12:33:32PM +1100, Jonathan Gray wrote:
> > On Thu, Mar 28, 2013 at 09:38:20AM +0100, Ralf Horstmann wrote:
> > > Hi,
> > >
> > > with current snapshot (i386) the DVI output of the docking station of
> > > my Fujitsu Lifebook T4215 is not detected anymore. Under Linux (Debian
> > > kernel 3.2) it's detected as DVI1. With older OpenBSD versions it was
> > > detected as TMDS-1.
> > >
> > > VGA on the docking station works fine as well as directly attached to the
> > > laptop. In contrast to VGA, there is no DVI output at the laptop, only at the
> > > docking station.
> > >
> > > Cheers,
> > > Ralf
> >
> > It sounds like your docking station has a SDVO output, which
> > apparently requires bitbanging for gmbus which we don't
> > yet do.
>
> Looking over the sdvo code it seems part of the i2c code
> is wrong, try this:

That diff isn't quite right either.  The following should be
equivalent to what Linux is doing.  Can't test this myself
unfortunately.


Index: intel_sdvo.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/drm/i915/intel_sdvo.c,v
retrieving revision 1.2
diff -u -p -r1.2 intel_sdvo.c
--- intel_sdvo.c 19 Mar 2013 03:58:10 -0000 1.2
+++ intel_sdvo.c 29 Mar 2013 15:52:38 -0000
@@ -392,10 +392,11 @@ intel_sdvo_write_sdvox(struct intel_sdvo
 bool
 intel_sdvo_read_byte(struct intel_sdvo *intel_sdvo, u8 addr, u8 *ch)
 {
- uint8_t cmd = 0;
+ uint8_t cmd = addr;
 
  iic_acquire_bus(intel_sdvo->i2c, 0);
- iic_exec(intel_sdvo->i2c, I2C_OP_READ_WITH_STOP, addr, &cmd, 1, ch, 1, 0);
+ iic_exec(intel_sdvo->i2c, I2C_OP_READ_WITH_STOP,
+ intel_sdvo->slave_addr, &cmd, 1, ch, 1, 0);
  iic_release_bus(intel_sdvo->i2c, 0);
 
  return true;
@@ -571,7 +572,6 @@ intel_sdvo_write_cmd(struct intel_sdvo *
  u8 *buf, status;
  struct i2c_msg *msgs;
  int i, ret = true, x;
- uint8_t c = 0;
 
         /* Would be simpler to allocate both in one go ? */        
  buf = (u8 *)malloc(args_len * 2 + 2, M_DRM,
@@ -589,14 +589,14 @@ intel_sdvo_write_cmd(struct intel_sdvo *
  intel_sdvo_debug_write(intel_sdvo, cmd, args, args_len);
 
  for (i = 0; i < args_len; i++) {
- msgs[i].op = I2C_OP_WRITE_WITH_STOP;
+ msgs[i].op = I2C_OP_WRITE;
  msgs[i].addr = intel_sdvo->slave_addr;
  msgs[i].len = 2;
  msgs[i].buf = buf + 2 *i;
  buf[2*i + 0] = SDVO_I2C_ARG_0 - i;
  buf[2*i + 1] = ((u8*)args)[i];
  }
- msgs[i].op = I2C_OP_WRITE_WITH_STOP;
+ msgs[i].op = I2C_OP_WRITE;
  msgs[i].addr = intel_sdvo->slave_addr;
  msgs[i].len = 2;
  msgs[i].buf = buf + 2*i;
@@ -605,7 +605,7 @@ intel_sdvo_write_cmd(struct intel_sdvo *
 
  /* the following two are to read the response */
  status = SDVO_I2C_CMD_STATUS;
- msgs[i+1].op = I2C_OP_WRITE_WITH_STOP;
+ msgs[i+1].op = I2C_OP_WRITE;
  msgs[i+1].addr = intel_sdvo->slave_addr;
  msgs[i+1].len = 1;
  msgs[i+1].buf = &status;
@@ -618,7 +618,7 @@ intel_sdvo_write_cmd(struct intel_sdvo *
  iic_acquire_bus(intel_sdvo->i2c, 0);
  for (x = 0; x < i+3; x++) {
  ret = iic_exec(intel_sdvo->i2c, msgs[x].op, msgs[x].addr,
-    &c, 1, msgs[x].buf, msgs[x].len, 0);
+    NULL, 0, msgs[x].buf, msgs[x].len, 0);
  if (ret) {
  DRM_DEBUG_KMS("sdvo i2c transfer failed\n");
  ret = false;

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Ralf Horstmann-2
* Mark Kettenis <[hidden email]> [2013-03-29 14:52]:

> > Date: Fri, 29 Mar 2013 13:24:58 +1100
> > From: Jonathan Gray <[hidden email]>
> >
> > On Fri, Mar 29, 2013 at 12:33:32PM +1100, Jonathan Gray wrote:
> > > On Thu, Mar 28, 2013 at 09:38:20AM +0100, Ralf Horstmann wrote:
> > > > Hi,
> > > >
> > > > with current snapshot (i386) the DVI output of the docking station of
> > > > my Fujitsu Lifebook T4215 is not detected anymore. Under Linux (Debian
> > > > kernel 3.2) it's detected as DVI1. With older OpenBSD versions it was
> > > > detected as TMDS-1.
> > > >
> > > > VGA on the docking station works fine as well as directly attached to the
> > > > laptop. In contrast to VGA, there is no DVI output at the laptop, only at the
> > > > docking station.
> > > >
> > > > Cheers,
> > > > Ralf
> > >
> > > It sounds like your docking station has a SDVO output, which
> > > apparently requires bitbanging for gmbus which we don't
> > > yet do.
> >
> > Looking over the sdvo code it seems part of the i2c code
> > is wrong, try this:
>
> That diff isn't quite right either.  The following should be
> equivalent to what Linux is doing.  Can't test this myself
> unfortunately.

With this patch I get:

[drm:pid0:intel_setup_outputs] probing SDVOB
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
[drm:pid0:intel_sdvo_write_cmd] sdvo i2c transfer failed
[drm:pid0:intel_setup_outputs] probing SDVOC
[drm:pid0:intel_sdvo_debug_write] SDVOC: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
[drm:pid0:intel_sdvo_write_cmd] sdvo i2c transfer failed

Cheers,
Ralf

OpenBSD 5.3-current (GENERIC.MP) #3: Fri Mar 29 15:03:42 CET 2013
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
real mem  = 2136797184 (2037MB)
avail mem = 2090307584 (1993MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/07/07, BIOS32 rev. 0 @ 0xfdbf4, SMBIOS rev. 2.4 @ 0xe5550 (53 entries)
bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "Version 1.14" date 05/07/2007
bios0: FUJITSU SIEMENS LIFEBOOK T4215
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT MCFG SSDT SSDT APIC HPET BOOT SLIC
acpi0: wakeup devices PCIB(S4) MODM(S3) HDEF(S3) PXS1(S4) PXS2(S4) LID_(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 8 (PCIB)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 5 (RP03)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpitz1 at acpi0: critical temperature is 100 degC
acpifujitsu at acpi0 not configured
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: CMB1 model "CP293420" serial 1 type LION oem "Fujitsu"
acpibat1 at acpi0: CMB2 not present
acpibtn2 at acpi0: SLPB
acpidock0 at acpi0: REPL docked (15)
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 0xd0200/0x1000 0xdc000/0x1c00!
cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2000, 1667, 1333, 1000 MHz
memory map conflict 0xfed00000/0x400
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0[drm:pid0:drm_agp_init] agp_available = 1
[drm:pid0:drm_ctxbitmap_next] drm_ctxbitmap_next bit : 0
[drm:pid0:drm_ctxbitmap_init] drm_ctxbitmap_init : 0

[drm:pid0:intel_detect_pch] No PCH detected
inteldrm0: apic 2 int 16
[drm:pid0:drm_vblank_init] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm:pid0:drm_vblank_init] Driver supports precise vblank timestamp query.
[drm:pid0:intel_opregion_setup] graphic opregion physical addr: 0x0
[drm:pid0:intel_opregion_setup] ACPI OpRegion not supported!
[drm:pid0:init_vbt_defaults] Set default to SSC at 100MHz
[drm:pid0:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 96 display_clock_mode 0
[drm:pid0:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:pid0:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:parse_lfp_panel_data] VBT initial LVDS value 40300300
[drm:pid0:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:pid0:parse_sdvo_device_mapping] the SDVO device with slave addr 70 is found on SDVOB port
[drm:pid0:parse_sdvo_device_mapping] SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5
[drm:pid0:intel_modeset_init] todo set fb base
[drm:pid0:intel_modeset_init] 2 display pipes available.
[drm:pid0:intel_crtc_init] swapping pipes & planes for FBC
[drm:pid0:intel_modeset_init] plane 0 init failed: -19
[drm:pid0:intel_crtc_init] swapping pipes & planes for FBC
[drm:pid0:intel_modeset_init] plane 1 init failed: -19
[drm:pid0:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation
[drm:pid0:intel_lvds_init] using mode from VBT: [drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:intel_panel_get_backlight] get backlight PWM = 15625
[drm:pid0:intel_setup_outputs] probing SDVOB
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
[drm:pid0:intel_sdvo_write_cmd] sdvo i2c transfer failed
[drm:pid0:intel_setup_outputs] probing SDVOC
[drm:pid0:intel_sdvo_debug_write] SDVOC: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
[drm:pid0:intel_sdvo_write_cmd] sdvo i2c transfer failed
[drm:pid0:intel_setup_overlay] initialized overlay support
[drm:pid0:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: disabled
[drm:pid0:intel_modeset_setup_hw_state] [CRTC:4] hw state readout: enabled
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=1
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:14:TV-14] hw state readout: disabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:5:LVDS-1] hw state readout: enabled
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:9:VGA-1] hw state readout: disabled
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:13:SVIDEO-1] hw state readout: disabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:drm_irq_install] irq=11
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid0:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid0:intel_crt_detect] CRT detected via hotplug
[drm:pid0:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
[drm:pid0:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid0:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:pid0:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1]
[drm:pid0:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid0:intel_get_load_detect_pipe] creating tmp fb for load-detection
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 5120
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_crtc_mode_set] [ENCODER:14:TV-14] set [MODE:0:NTSC 480i]
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 34
[drm:pid0:intel_calculate_wm] FIFO watermark level: -5
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 80
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_connector_check_state] [CONNECTOR:13:SVIDEO-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:intel_tv_detect_type] TV detected: c0007, 7f0000aa
[drm:pid0:intel_tv_detect_type] Unrecognised TV connection
[drm:pid0:intel_release_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] disconnected
[drm:pid0:drm_setup_crtcs]
[drm:pid0:drm_enable_connectors] connector 5 enabled? yes
[drm:pid0:drm_enable_connectors] connector 9 enabled? yes
[drm:pid0:drm_enable_connectors] connector 13 enabled? no
[drm:pid0:drm_target_preferred] looking for cmdline mode on connector 5
[drm:pid0:drm_pick_cmdline_mode] stub
[drm:pid0:drm_target_preferred] looking for preferred mode on connector 5
[drm:pid0:drm_target_preferred] found mode 1024x768
[drm:pid0:drm_target_preferred] looking for cmdline mode on connector 9
[drm:pid0:drm_pick_cmdline_mode] stub
[drm:pid0:drm_target_preferred] looking for preferred mode on connector 9
[drm:pid0:drm_target_preferred] found mode 1920x1200
[drm:pid0:drm_setup_crtcs] picking CRTCs for 4096x4096 config
[drm:pid0:drm_setup_crtcs] desired mode 1024x768 set on crtc 4
[drm:pid0:drm_setup_crtcs] desired mode 1920x1200 set on crtc 3
[drm:pid0:intelfb_create] allocated 1920x1200 fb: 0x007e0000, bo 0xd8fb8158
[drm:pid0:intelfb_create] skipping call to vga_switcheroo_client_fb_set
[drm:pid0:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:intel_modeset_stage_output_state] encoder changed, full mode switch
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid0:intel_modeset_stage_output_state] crtc changed, full mode switch
[drm:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_crtc_mode_set] [ENCODER:10:DAC-10] set [MODE:43:1920x1200]
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 120
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_connector_check_state] [CONNECTOR:9:VGA-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:pid0:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid0:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:4]
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0
[drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 1: Noop due to uninitialized mode.
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 120
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:i9xx_get_refclk] using SSC reference clock of 96 MHz
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe B:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 120
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:intel_crtc_mode_set] [ENCODER:6:LVDS-6] set [MODE:42:1024x768]
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid0:intel_calculate_wm] FIFO watermark level: 5
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 5, B: 1
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_enable_lvds] applying panel-fitter: 8, 0
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 15625
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_connector_check_state] [CONNECTOR:9:VGA-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Sigmatel STAC9228X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 22
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8055" rev 0x12, Yukon-2 EC Ultra rev. A1 (0x2): apic 2 int 16
msk0 at mskc0 port A: address 00:17:42:41:a8:2d
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 21
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 20
pci3 at ppb2 bus 5
5:0:0: mem address conflict 0xf0100000/0x1000
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:1b:77:72:01:7c
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 20
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 8
cbb0 at pci4 dev 3 function 0 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int 16
cbb1 at pci4 dev 3 function 1 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int 16, CardBus support disabled
sdhc0 at pci4 dev 3 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x00: apic 2 int 16
sdmmc0 at sdhc0
"O2 Micro OZ711MP1 XDHC" rev 0x00 at pci4 dev 3 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 9 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-841S, 1.31> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2MH12, PPG4> SCSI3 0/direct fixed naa.01507a51e26b8cdf
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
iic0 at ichiic0
iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00 0a=00 0b=00 0c=00 0d=00 0e=00 0f=00 10=00 11=20 24=00 b9=00 ba=00 words 00=0000 01=0000 02=0000 03=0000 04=0040 05=0000 06=0000 07=0000
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
"O2Micro, SmartCardBus Reader, V1.0" at pcmcia1 function 0 not configured
scsibus2 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 15423MB, 512 bytes/sector, 31586304 sectors
uhub5 at uhub0 port 4 "NEC Corporation USB2.0 Hub Controller" rev 2.00/1.00 addr 2
uplcom0 at uhub5 port 2 "Prolific Technology PL2303 Serial" rev 1.10/2.02 addr 3
ucom0 at uplcom0
uhub6 at uhub5 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr 4
uhub7 at uhub6 port 2 "GENESYS USB 2.0 HUB" rev 2.00/77.60 addr 5
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech Optical USB Mouse" rev 2.00/3.40 addr 6
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub7 port 3 configuration 1 interface 0 "Alcor Micro product 0x3108" rev 1.10/3.01 addr 7
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub7 port 3 configuration 1 interface 1 "Alcor Micro product 0x3108" rev 1.10/3.01 addr 7
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uaudio0 at uhub7 port 4 configuration 1 interface 0 "C-Media Electronics Inc. USB Multimedia Audio Device" rev 1.10/1.00 addr 8
uaudio0: audio rev 1.00, 8 mixer controls
audio1 at uaudio0
uhidev3 at uhub7 port 4 configuration 1 interface 3 "C-Media Electronics Inc. USB Multimedia Audio Device" rev 1.10/1.00 addr 8
uhidev3: iclass 3/0
uhid2 at uhidev3: input=16, output=16, feature=0
ugen0 at uhub3 port 1 "vendor 0x0c24 product 0x000f" rev 2.00/19.15 addr 2
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
ugen1 at uhub3 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/6.21 addr 3
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (3e4d92862aa71140.a) swap on sd0b dump on sd0b
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd2: 80821MB, 512 bytes/sector, 165522270 sectors
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[drm:pid4:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid4:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid9834:drmopen] open_count = 0
[drm:pid9834:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid9834:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid9834:drm_firstopen]
[drm:pid9834:drmopen] minor = 1
[drm:pid10533:drmclose] open_count = 1
[drm:pid10533:drmclose] pid = 10533, device = 0xd3009400, open_count = 1
[drm:pid10533:drm_lastclose]
[drm:pid10533:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid10533:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid9834:drmopen] open_count = 0
[drm:pid9834:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid9834:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid9834:drm_firstopen]
[drm:pid9834:drmopen] minor = 1
[drm:pid10533:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[drm:pid10533:drmclose] open_count = 1
[drm:pid10533:drmclose] pid = 10533, device = 0xd3009400, open_count = 1
[drm:pid10533:drm_lastclose]
[drm:pid10533:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid10533:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid9834:drmopen] open_count = 0
[drm:pid9834:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid9834:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid9834:drm_firstopen]
[drm:pid9834:drmopen] minor = 1
[drm:pid10533:drmclose] open_count = 1
[drm:pid10533:drmclose] pid = 10533, device = 0xd3009400, open_count = 1
[drm:pid10533:drm_lastclose]
[drm:pid10533:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid10533:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid9834:drmopen] open_count = 0
[drm:pid9834:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid9834:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid9834:drm_firstopen]
[drm:pid9834:drmopen] minor = 1
[drm:pid10533:drmclose] open_count = 1
[drm:pid10533:drmclose] pid = 10533, device = 0xd3009400, open_count = 1
[drm:pid10533:drm_lastclose]
[drm:pid10533:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid10533:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid9834:drmopen] open_count = 0
[drm:pid9834:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid9834:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid9834:drm_firstopen]
[drm:pid9834:drmopen] minor = 1
[drm:pid10533:drmclose] open_count = 1
[drm:pid10533:drmclose] pid = 10533, device = 0xd3009400, open_count = 1
[drm:pid10533:drm_lastclose]
[drm:pid10533:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid10533:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid9834:drmopen] open_count = 0
[drm:pid9834:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid9834:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid9834:drm_firstopen]
[drm:pid9834:drmopen] minor = 1
[drm:pid10533:i915_getparam] Unknown parameter 19
[drm:pid10533:i915_getparam] Unknown parameter 21
[drm:pid10533:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[drm:pid10533:drm_mode_getresources] [CRTC:3]
[drm:pid10533:drm_mode_getresources] [CRTC:4]
[drm:pid10533:drm_mode_getresources] [ENCODER:6:LVDS-6]
[drm:pid10533:drm_mode_getresources] [ENCODER:10:DAC-10]
[drm:pid10533:drm_mode_getresources] [ENCODER:14:TV-14]
[drm:pid10533:drm_mode_getresources] [CONNECTOR:5:LVDS-1]
[drm:pid10533:drm_mode_getresources] [CONNECTOR:9:VGA-1]
[drm:pid10533:drm_mode_getresources] [CONNECTOR:13:SVIDEO-1]
[drm:pid10533:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[drm:pid10533:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid10533:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid10533:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid10533:intel_crt_detect] CRT detected via hotplug
[drm:pid10533:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid10533:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid10533:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1]
[drm:pid10533:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid10533:intel_get_load_detect_pipe] no pipe available for load-detect
[drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] probed modes :
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 62:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 59:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 61:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[drm:pid10533:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid10533:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid10533:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid10533:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid10533:intel_crt_detect] CRT detected via hotplug
[drm:pid10533:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid10533:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid10533:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1]
[drm:pid10533:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid10533:intel_get_load_detect_pipe] no pipe available for load-detect
[drm:pid10533:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] probed modes :
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 62:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 59:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 61:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[drm:pid10533:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid10533:intel_panel_actually_set_backlight] set backlight PWM = 15625
[drm:pid10533:intel_panel_actually_set_backlight] set backlight PWM = 15625
[drm:pid10533:drm_mode_addfb] [FB:79]
[drm:pid10533:drm_mode_setcrtc] [CRTC:3]
[drm:pid10533:drm_mode_setcrtc] [CONNECTOR:9:VGA-1]
[drm:pid10533:intel_crtc_set_config] [CRTC:3] [FB:79] #connectors=1 (x y) (0 0)
[drm:pid10533:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid10533:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid10533:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid10533:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid10533:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid10533:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid10533:intel_calculate_wm] FIFO watermark level: 5
[drm:pid10533:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid10533:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid10533:i9xx_update_wm] self-refresh entries: 64
[drm:pid10533:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid10533:i9xx_update_wm] memory self refresh enabled
[drm:pid10533:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid10533:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid10533:i9xx_update_plane] Writing base 01400000 00000000 0 0 4096
[drm:pid10533:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid10533:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid10533:intel_calculate_wm] FIFO watermark level: 5
[drm:pid10533:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid10533:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid10533:i9xx_update_wm] self-refresh entries: 64
[drm:pid10533:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid10533:i9xx_update_wm] memory self refresh enabled
[drm:pid10533:intel_crtc_mode_set] [ENCODER:10:DAC-10] set [MODE:80:1024x768]
[drm:pid10533:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid10533:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid10533:intel_calculate_wm] FIFO watermark level: 5
[drm:pid10533:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid10533:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid10533:intel_calculate_wm] FIFO watermark level: 8
[drm:pid10533:i9xx_update_wm] FIFO watermarks - A: 5, B: 8
[drm:pid10533:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 8, C: 2, SR 1
[drm:pid10533:i9xx_update_wm] memory self refresh disabled
[drm:pid10533:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid10533:intel_connector_check_state] [CONNECTOR:9:VGA-1]
[drm:pid10533:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid10533:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid10533:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid10533:intel_modeset_check_state] [CRTC:3]
[drm:pid10533:intel_modeset_check_state] [CRTC:4]
[drm:pid10533:drm_mode_setcrtc] [CRTC:4]
[drm:pid10533:drm_mode_setcrtc] [CONNECTOR:5:LVDS-1]
[drm:pid10533:intel_crtc_set_config] [CRTC:4] [FB:79] #connectors=1 (x y) (0 0)
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid10533:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid10533:i9xx_update_plane] Writing base 01400000 00000000 0 0 4096
[drm:pid10533:i915_getparam] Unknown parameter 19
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 3 to 3
[drm:pid10533:intel_crtc_cursor_set] cursor off
[drm:pid10533:intel_crtc_cursor_set] cursor off
[drm:pid4:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid4:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid4:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid4:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid4:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid4:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid4:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid4:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid4:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid4:intel_calculate_wm] FIFO watermark level: 5
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid4:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid4:i9xx_update_wm] self-refresh entries: 64
[drm:pid4:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid4:i9xx_update_wm] memory self refresh enabled
[drm:pid4:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid4:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid4:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid4:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid4:intel_calculate_wm] FIFO watermark level: 5
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid4:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid4:i9xx_update_wm] self-refresh entries: 64
[drm:pid4:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid4:i9xx_update_wm] memory self refresh enabled
[drm:pid4:intel_crtc_mode_set] [ENCODER:10:DAC-10] set [MODE:43:1920x1200]
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid4:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid4:intel_calculate_wm] FIFO watermark level: 5
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid4:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid4:intel_calculate_wm] FIFO watermark level: -20
[drm:pid4:i9xx_update_wm] FIFO watermarks - A: 5, B: 1
[drm:pid4:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1
[drm:pid4:i9xx_update_wm] memory self refresh disabled
[drm:pid4:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid4:intel_connector_check_state] [CONNECTOR:9:VGA-1]
[drm:pid4:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid4:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid4:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid4:intel_modeset_check_state] [CRTC:3]
[drm:pid4:intel_modeset_check_state] [CRTC:4]
[drm:pid4:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid4:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 3 to 3
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 3 to 3

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Mark Kettenis
> Date: Fri, 29 Mar 2013 15:22:57 +0100
> From: Ralf Horstmann <[hidden email]>
>
> * Mark Kettenis <[hidden email]> [2013-03-29 14:52]:
> > > Date: Fri, 29 Mar 2013 13:24:58 +1100
> > > From: Jonathan Gray <[hidden email]>
> > >
> > > > It sounds like your docking station has a SDVO output, which
> > > > apparently requires bitbanging for gmbus which we don't
> > > > yet do.
> > >
> > > Looking over the sdvo code it seems part of the i2c code
> > > is wrong, try this:
> >
> > That diff isn't quite right either.  The following should be
> > equivalent to what Linux is doing.  Can't test this myself
> > unfortunately.
>
> With this patch I get:
>
> [drm:pid0:intel_setup_outputs] probing SDVOB
> [drm:pid0:intel_sdvo_debug_write] SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
> [drm:pid0:intel_sdvo_write_cmd] sdvo i2c transfer failed
> [drm:pid0:intel_setup_outputs] probing SDVOC
> [drm:pid0:intel_sdvo_debug_write] SDVOC: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
> [drm:pid0:intel_sdvo_write_cmd] sdvo i2c transfer failed
>
> Cheers,
> Ralf

Ralf, Matthieu,

Yesterday I committed some changes that fix some issues in the SDVO
code.  For my setup, whhere HDMI output is provided over SDVO this
still isn't enough to give me output.  For that I need some further
changes.  But I'm interested to see if what's now in -current works
for you.  Could you send me a dmesg from a kernel with DRMDEBUG enabled?

Thanks,

Mark

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Ralf Horstmann-2
* Mark Kettenis <[hidden email]> [2013-03-31 11:51]:
> Ralf, Matthieu,
>
> Yesterday I committed some changes that fix some issues in the SDVO
> code.  For my setup, whhere HDMI output is provided over SDVO this
> still isn't enough to give me output.  For that I need some further
> changes.  But I'm interested to see if what's now in -current works
> for you.  Could you send me a dmesg from a kernel with DRMDEBUG enabled?

Still doesn't detect the DVI output, but different error messsage now:

[drm:pid0:intel_setup_outputs] probing SDVOB
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: [drm:pid0:intel_sdvo_read_byte] i2c transfer returned 6
... failed
[drm:pid0:intel_setup_outputs] probing SDVOC
[drm:pid0:intel_sdvo_read_byte] i2c transfer returned 6
[drm:pid0:intel_sdvo_init] No SDVO device found on SDVOC

Full dmesg below. I also tried the i2c timing patch you sent to tech@, same
error message.

Cheers,
Ralf

OpenBSD 5.3-current (GENERIC.MP) #22: Sun Mar 31 13:33:59 CEST 2013
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
real mem  = 2136797184 (2037MB)
avail mem = 2090307584 (1993MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/07/07, BIOS32 rev. 0 @ 0xfdbf4, SMBIOS rev. 2.4 @ 0xe5550 (53 entries)
bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "Version 1.14" date 05/07/2007
bios0: FUJITSU SIEMENS LIFEBOOK T4215
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT MCFG SSDT SSDT APIC HPET BOOT SLIC
acpi0: wakeup devices PCIB(S4) MODM(S3) HDEF(S3) PXS1(S4) PXS2(S4) LID_(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 8 (PCIB)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 5 (RP03)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpitz1 at acpi0: critical temperature is 100 degC
acpifujitsu at acpi0 not configured
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: CMB1 model "CP293420" serial 1 type LION oem "Fujitsu"
acpibat1 at acpi0: CMB2 not present
acpibtn2 at acpi0: SLPB
acpidock0 at acpi0: REPL docked (15)
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 0xd0200/0x1000 0xdc000/0x1c00!
cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2000, 1667, 1333, 1000 MHz
memory map conflict 0xfed00000/0x400
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0[drm:pid0:drm_agp_init] agp_available = 1
[drm:pid0:drm_ctxbitmap_next] drm_ctxbitmap_next bit : 0
[drm:pid0:drm_ctxbitmap_init] drm_ctxbitmap_init : 0

[drm:pid0:intel_detect_pch] No PCH detected
inteldrm0: apic 2 int 16
[drm:pid0:drm_vblank_init] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm:pid0:drm_vblank_init] Driver supports precise vblank timestamp query.
[drm:pid0:intel_opregion_setup] graphic opregion physical addr: 0x0
[drm:pid0:intel_opregion_setup] ACPI OpRegion not supported!
[drm:pid0:init_vbt_defaults] Set default to SSC at 100MHz
[drm:pid0:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 96 display_clock_mode 0
[drm:pid0:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:pid0:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:parse_lfp_panel_data] VBT initial LVDS value 40300300
[drm:pid0:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:pid0:parse_sdvo_device_mapping] the SDVO device with slave addr 70 is found on SDVOB port
[drm:pid0:parse_sdvo_device_mapping] SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5
[drm:pid0:intel_modeset_init] todo set fb base
[drm:pid0:intel_modeset_init] 2 display pipes available.
[drm:pid0:intel_crtc_init] swapping pipes & planes for FBC
[drm:pid0:intel_modeset_init] plane 0 init failed: -19
[drm:pid0:intel_crtc_init] swapping pipes & planes for FBC
[drm:pid0:intel_modeset_init] plane 1 init failed: -19
[drm:pid0:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation
[drm:pid0:intel_lvds_init] using mode from VBT: [drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:intel_panel_get_backlight] get backlight PWM = 15625
[drm:pid0:intel_setup_outputs] probing SDVOB
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: [drm:pid0:intel_sdvo_read_byte] i2c transfer returned 6
... failed
[drm:pid0:intel_setup_outputs] probing SDVOC
[drm:pid0:intel_sdvo_read_byte] i2c transfer returned 6
[drm:pid0:intel_sdvo_init] No SDVO device found on SDVOC
[drm:pid0:intel_setup_overlay] initialized overlay support
[drm:pid0:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: disabled
[drm:pid0:intel_modeset_setup_hw_state] [CRTC:4] hw state readout: enabled
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=1
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:14:TV-14] hw state readout: disabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:5:LVDS-1] hw state readout: enabled
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:9:VGA-1] hw state readout: disabled
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:13:SVIDEO-1] hw state readout: disabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:drm_irq_install] irq=11
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid0:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid0:intel_crt_detect] CRT detected via hotplug
[drm:pid0:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
[drm:pid0:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid0:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:pid0:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1]
[drm:pid0:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid0:intel_get_load_detect_pipe] creating tmp fb for load-detection
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 5120
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_crtc_mode_set] [ENCODER:14:TV-14] set [MODE:0:NTSC 480i]
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 34
[drm:pid0:intel_calculate_wm] FIFO watermark level: -5
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 80
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_connector_check_state] [CONNECTOR:13:SVIDEO-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:intel_tv_detect_type] TV detected: c0007, 7f0000aa
[drm:pid0:intel_tv_detect_type] Unrecognised TV connection
[drm:pid0:intel_release_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] disconnected
[drm:pid0:drm_setup_crtcs]
[drm:pid0:drm_enable_connectors] connector 5 enabled? yes
[drm:pid0:drm_enable_connectors] connector 9 enabled? yes
[drm:pid0:drm_enable_connectors] connector 13 enabled? no
[drm:pid0:drm_target_preferred] looking for cmdline mode on connector 5
[drm:pid0:drm_pick_cmdline_mode] stub
[drm:pid0:drm_target_preferred] looking for preferred mode on connector 5
[drm:pid0:drm_target_preferred] found mode 1024x768
[drm:pid0:drm_target_preferred] looking for cmdline mode on connector 9
[drm:pid0:drm_pick_cmdline_mode] stub
[drm:pid0:drm_target_preferred] looking for preferred mode on connector 9
[drm:pid0:drm_target_preferred] found mode 1920x1200
[drm:pid0:drm_setup_crtcs] picking CRTCs for 4096x4096 config
[drm:pid0:drm_setup_crtcs] desired mode 1024x768 set on crtc 4
[drm:pid0:drm_setup_crtcs] desired mode 1920x1200 set on crtc 3
[drm:pid0:intelfb_create] allocated 1920x1200 fb: 0x007e0000, bo 0xd8fb8158
[drm:pid0:intelfb_create] skipping call to vga_switcheroo_client_fb_set
[drm:pid0:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:intel_modeset_stage_output_state] encoder changed, full mode switch
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid0:intel_modeset_stage_output_state] crtc changed, full mode switch
[drm:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_crtc_mode_set] [ENCODER:10:DAC-10] set [MODE:43:1920x1200]
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 120
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_connector_check_state] [CONNECTOR:9:VGA-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:pid0:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid0:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:4]
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0
[drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 1: Noop due to uninitialized mode.
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 120
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:i9xx_get_refclk] using SSC reference clock of 96 MHz
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe B:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 42:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 120
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:intel_crtc_mode_set] [ENCODER:6:LVDS-6] set [MODE:42:1024x768]
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid0:intel_calculate_wm] FIFO watermark level: 5
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 5, B: 1
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_enable_lvds] applying panel-fitter: 8, 0
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 15625
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_connector_check_state] [CONNECTOR:9:VGA-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Sigmatel STAC9228X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 22
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8055" rev 0x12, Yukon-2 EC Ultra rev. A1 (0x2): apic 2 int 16
msk0 at mskc0 port A: address 00:17:42:41:a8:2d
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 21
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 20
pci3 at ppb2 bus 5
5:0:0: mem address conflict 0xf0100000/0x1000
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:1b:77:72:01:7c
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 20
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 8
cbb0 at pci4 dev 3 function 0 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int 16
cbb1 at pci4 dev 3 function 1 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int 16, CardBus support disabled
sdhc0 at pci4 dev 3 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x00: apic 2 int 16
sdmmc0 at sdhc0
"O2 Micro OZ711MP1 XDHC" rev 0x00 at pci4 dev 3 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 9 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-841S, 1.31> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2MH12, PPG4> SCSI3 0/direct fixed naa.01507a51e26b8cdf
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
iic0 at ichiic0
iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00 0a=00 0b=00 0c=00 0d=00 0e=00 0f=00 10=00 11=20 24=00 b9=00 ba=00 words 00=0000 01=0000 02=0000 03=0000 04=0040 05=0000 06=0000 07=0000
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
"O2Micro, SmartCardBus Reader, V1.0" at pcmcia1 function 0 not configured
scsibus2 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 15423MB, 512 bytes/sector, 31586304 sectors
uhub5 at uhub0 port 4 "NEC Corporation USB2.0 Hub Controller" rev 2.00/1.00 addr 2
uplcom0 at uhub5 port 2 "Prolific Technology PL2303 Serial" rev 1.10/2.02 addr 3
ucom0 at uplcom0
uhub6 at uhub5 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr 4
uhub7 at uhub6 port 2 "GENESYS USB 2.0 HUB" rev 2.00/77.60 addr 5
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech Optical USB Mouse" rev 2.00/3.40 addr 6
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub7 port 3 configuration 1 interface 0 "Alcor Micro product 0x3108" rev 1.10/3.01 addr 7
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub7 port 3 configuration 1 interface 1 "Alcor Micro product 0x3108" rev 1.10/3.01 addr 7
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uaudio0 at uhub7 port 4 configuration 1 interface 0 "C-Media Electronics Inc. USB Multimedia Audio Device" rev 1.10/1.00 addr 8
uaudio0: audio rev 1.00, 8 mixer controls
audio1 at uaudio0
uhidev3 at uhub7 port 4 configuration 1 interface 3 "C-Media Electronics Inc. USB Multimedia Audio Device" rev 1.10/1.00 addr 8
uhidev3: iclass 3/0
uhid2 at uhidev3: input=16, output=16, feature=0
ugen0 at uhub3 port 1 "vendor 0x0c24 product 0x000f" rev 2.00/19.15 addr 2
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
ugen1 at uhub3 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/6.21 addr 3
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (3e4d92862aa71140.a) swap on sd0b dump on sd0b
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd2: 80821MB, 512 bytes/sector, 165522270 sectors
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 2 to 2
[drm:pid4:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid4:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6956:drmopen] open_count = 0
[drm:pid6956:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid6956:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid6956:drm_firstopen]
[drm:pid6956:drmopen] minor = 1
[drm:pid12116:drmclose] open_count = 1
[drm:pid12116:drmclose] pid = 12116, device = 0xd3009400, open_count = 1
[drm:pid12116:drm_lastclose]
[drm:pid12116:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid12116:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6956:drmopen] open_count = 0
[drm:pid6956:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid6956:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid6956:drm_firstopen]
[drm:pid6956:drmopen] minor = 1
[drm:pid12116:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[drm:pid12116:drmclose] open_count = 1
[drm:pid12116:drmclose] pid = 12116, device = 0xd3009400, open_count = 1
[drm:pid12116:drm_lastclose]
[drm:pid12116:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid12116:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6956:drmopen] open_count = 0
[drm:pid6956:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid6956:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid6956:drm_firstopen]
[drm:pid6956:drmopen] minor = 1
[drm:pid12116:drmclose] open_count = 1
[drm:pid12116:drmclose] pid = 12116, device = 0xd3009400, open_count = 1
[drm:pid12116:drm_lastclose]
[drm:pid12116:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid12116:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6956:drmopen] open_count = 0
[drm:pid6956:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid6956:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid6956:drm_firstopen]
[drm:pid6956:drmopen] minor = 1
[drm:pid12116:drmclose] open_count = 1
[drm:pid12116:drmclose] pid = 12116, device = 0xd3009400, open_count = 1
[drm:pid12116:drm_lastclose]
[drm:pid12116:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid12116:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6956:drmopen] open_count = 0
[drm:pid6956:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid6956:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid6956:drm_firstopen]
[drm:pid6956:drmopen] minor = 1
[drm:pid12116:drmclose] open_count = 1
[drm:pid12116:drmclose] pid = 12116, device = 0xd3009400, open_count = 1
[drm:pid12116:drm_lastclose]
[drm:pid12116:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid12116:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid6956:drmopen] open_count = 0
[drm:pid6956:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid6956:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid6956:drm_firstopen]
[drm:pid6956:drmopen] minor = 1
[drm:pid12116:i915_getparam] Unknown parameter 19
[drm:pid12116:i915_getparam] Unknown parameter 21
[drm:pid12116:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[drm:pid12116:drm_mode_getresources] [CRTC:3]
[drm:pid12116:drm_mode_getresources] [CRTC:4]
[drm:pid12116:drm_mode_getresources] [ENCODER:6:LVDS-6]
[drm:pid12116:drm_mode_getresources] [ENCODER:10:DAC-10]
[drm:pid12116:drm_mode_getresources] [ENCODER:14:TV-14]
[drm:pid12116:drm_mode_getresources] [CONNECTOR:5:LVDS-1]
[drm:pid12116:drm_mode_getresources] [CONNECTOR:9:VGA-1]
[drm:pid12116:drm_mode_getresources] [CONNECTOR:13:SVIDEO-1]
[drm:pid12116:drm_mode_getresources] CRTC[2] CONNECTORS[3] ENCODERS[3]
[drm:pid12116:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid12116:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid12116:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid12116:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid12116:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid12116:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid12116:intel_crt_detect] CRT detected via hotplug
[drm:pid12116:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid12116:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid12116:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid12116:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid12116:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1]
[drm:pid12116:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid12116:intel_get_load_detect_pipe] no pipe available for load-detect
[drm:pid12116:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] probed modes :
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 62:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 59:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 61:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[drm:pid12116:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid12116:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid12116:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid12116:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 28:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid12116:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid12116:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid12116:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid12116:intel_crt_detect] CRT detected via hotplug
[drm:pid12116:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid12116:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] probed modes :
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 30:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 35:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 33:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 34:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 32:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 31:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 39:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 36:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 37:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 38:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid12116:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid12116:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid12116:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1]
[drm:pid12116:intel_get_load_detect_pipe] [CONNECTOR:13:SVIDEO-1], [ENCODER:14:TV-14]
[drm:pid12116:intel_get_load_detect_pipe] no pipe available for load-detect
[drm:pid12116:drm_helper_probe_single_connector_modes] [CONNECTOR:13:SVIDEO-1] probed modes :
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 62:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 59:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 61:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 60:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[drm:pid12116:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:pid12116:intel_panel_actually_set_backlight] set backlight PWM = 15625
[drm:pid12116:intel_panel_actually_set_backlight] set backlight PWM = 15625
[drm:pid12116:drm_mode_addfb] [FB:79]
[drm:pid12116:drm_mode_setcrtc] [CRTC:3]
[drm:pid12116:drm_mode_setcrtc] [CONNECTOR:9:VGA-1]
[drm:pid12116:intel_crtc_set_config] [CRTC:3] [FB:79] #connectors=1 (x y) (0 0)
[drm:pid12116:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid12116:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid12116:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid12116:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid12116:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid12116:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid12116:intel_calculate_wm] FIFO watermark level: 5
[drm:pid12116:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid12116:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid12116:i9xx_update_wm] self-refresh entries: 64
[drm:pid12116:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid12116:i9xx_update_wm] memory self refresh enabled
[drm:pid12116:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid12116:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid12116:i9xx_update_plane] Writing base 01400000 00000000 0 0 4096
[drm:pid12116:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid12116:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid12116:intel_calculate_wm] FIFO watermark level: 5
[drm:pid12116:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid12116:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid12116:i9xx_update_wm] self-refresh entries: 64
[drm:pid12116:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid12116:i9xx_update_wm] memory self refresh enabled
[drm:pid12116:intel_crtc_mode_set] [ENCODER:10:DAC-10] set [MODE:80:1024x768]
[drm:pid12116:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid12116:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid12116:intel_calculate_wm] FIFO watermark level: 5
[drm:pid12116:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid12116:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid12116:intel_calculate_wm] FIFO watermark level: 8
[drm:pid12116:i9xx_update_wm] FIFO watermarks - A: 5, B: 8
[drm:pid12116:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 8, C: 2, SR 1
[drm:pid12116:i9xx_update_wm] memory self refresh disabled
[drm:pid12116:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid12116:intel_connector_check_state] [CONNECTOR:9:VGA-1]
[drm:pid12116:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid12116:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid12116:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid12116:intel_modeset_check_state] [CRTC:3]
[drm:pid12116:intel_modeset_check_state] [CRTC:4]
[drm:pid12116:drm_mode_setcrtc] [CRTC:4]
[drm:pid12116:drm_mode_setcrtc] [CONNECTOR:5:LVDS-1]
[drm:pid12116:intel_crtc_set_config] [CRTC:4] [FB:79] #connectors=1 (x y) (0 0)
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid12116:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid12116:i9xx_update_plane] Writing base 01400000 00000000 0 0 4096
[drm:pid12116:i915_getparam] Unknown parameter 19
[drm:pid12116:intel_crtc_cursor_set] cursor off
[drm:pid12116:intel_crtc_cursor_set] cursor off
[drm:pid4:intel_crtc_set_config] [CRTC:3] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid4:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid4:drm_mode_debug_printmodeline] Modeline 80:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid4:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid4:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid4:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid4:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid4:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid4:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid4:intel_calculate_wm] FIFO watermark level: 5
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid4:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid4:i9xx_update_wm] self-refresh entries: 64
[drm:pid4:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid4:i9xx_update_wm] memory self refresh enabled
[drm:pid4:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid4:drm_mode_debug_printmodeline] Modeline 43:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid4:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid4:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid4:intel_calculate_wm] FIFO watermark level: 5
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid4:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid4:i9xx_update_wm] self-refresh entries: 64
[drm:pid4:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid4:i9xx_update_wm] memory self refresh enabled
[drm:pid4:intel_crtc_mode_set] [ENCODER:10:DAC-10] set [MODE:43:1920x1200]
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid4:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid4:intel_calculate_wm] FIFO watermark level: 5
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid4:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid4:intel_calculate_wm] FIFO watermark level: -20
[drm:pid4:i9xx_update_wm] FIFO watermarks - A: 5, B: 1
[drm:pid4:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1
[drm:pid4:i9xx_update_wm] memory self refresh disabled
[drm:pid4:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid4:intel_connector_check_state] [CONNECTOR:9:VGA-1]
[drm:pid4:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid4:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid4:intel_modeset_check_state] [ENCODER:14:TV-14]
[drm:pid4:intel_modeset_check_state] [CRTC:3]
[drm:pid4:intel_modeset_check_state] [CRTC:4]
[drm:pid4:intel_crtc_set_config] [CRTC:4] [FB:44] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:9:VGA-1] to [CRTC:3]
[drm:pid4:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 3 to 3
[drm:pid4:drm_output_poll_execute] [CONNECTOR:13:SVIDEO-1] status updated from 3 to 3

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Mark Kettenis
> Date: Sun, 31 Mar 2013 13:48:39 +0200
> From: Ralf Horstmann <[hidden email]>
>
> * Mark Kettenis <[hidden email]> [2013-03-31 11:51]:
> > Ralf, Matthieu,
> >
> > Yesterday I committed some changes that fix some issues in the SDVO
> > code.  For my setup, whhere HDMI output is provided over SDVO this
> > still isn't enough to give me output.  For that I need some further
> > changes.  But I'm interested to see if what's now in -current works
> > for you.  Could you send me a dmesg from a kernel with DRMDEBUG enabled?
>
> Still doesn't detect the DVI output, but different error messsage now:

Thanks Ralf, looks like your system needs the I2C bit-banging as well.
I committed the necessary code earlier today.  Make sure ypou have
revision 1.6 of sys/dev/pci/drm/i915/intel_sdvo.c.  If that still
doesn't work, try the attached diff as well.

Index: i2c_bitbang.c
===================================================================
RCS file: /cvs/src/sys/dev/i2c/i2c_bitbang.c,v
retrieving revision 1.3
diff -u -p -r1.3 i2c_bitbang.c
--- i2c_bitbang.c 13 Jan 2006 23:56:46 -0000 1.3
+++ i2c_bitbang.c 31 Mar 2013 17:56:47 -0000
@@ -62,11 +62,11 @@ i2c_bitbang_send_start(void *v, int flag
  BB_DIR(OUTPUT);
 
  BB_SET(SDA | SCL);
- delay(5); /* bus free time (4.7 uS) */
+ delay(6); /* bus free time (4.7 uS) */
  BB_SET(      SCL);
- delay(4); /* start hold time (4.0 uS) */
+ delay(5); /* start hold time (4.0 uS) */
  BB_SET(        0);
- delay(5); /* clock low time (4.7 uS) */
+ delay(6); /* clock low time (4.7 uS) */
 
  return (0);
 }
@@ -79,7 +79,7 @@ i2c_bitbang_send_stop(void *v, int flags
  BB_DIR(OUTPUT);
 
  BB_SET(      SCL);
- delay(4); /* stop setup time (4.0 uS) */
+ delay(5); /* stop setup time (4.0 uS) */
  BB_SET(SDA | SCL);
 
  return (0);
@@ -115,11 +115,11 @@ i2c_bitbang_read_byte(void *v, uint8_t *
  for (i = 0; i < 8; i++) {
  val <<= 1;
  BB_SET(SDA | SCL);
- delay(4); /* clock high time (4.0 uS) */
+ delay(5); /* clock high time (4.0 uS) */
  if (BB_READ & SDA)
  val |= 1;
  BB_SET(SDA      );
- delay(5); /* clock low time (4.7 uS) */
+ delay(6); /* clock low time (4.7 uS) */
  }
 
  bit = (flags & I2C_F_LAST) ? SDA : 0;
@@ -127,13 +127,13 @@ i2c_bitbang_read_byte(void *v, uint8_t *
  BB_SET(bit      );
  delay(1); /* data setup time (250 nS) */
  BB_SET(bit | SCL);
- delay(4); /* clock high time (4.0 uS) */
+ delay(5); /* clock high time (4.0 uS) */
  BB_SET(bit      );
- delay(5); /* clock low time (4.7 uS) */
+ delay(6); /* clock low time (4.7 uS) */
 
  BB_DIR(INPUT);
  BB_SET(SDA      );
- delay(5);
+ delay(6);
 
  if ((flags & (I2C_F_STOP | I2C_F_LAST)) == (I2C_F_STOP | I2C_F_LAST))
  (void) i2c_bitbang_send_stop(v, flags, ops);
@@ -157,20 +157,20 @@ i2c_bitbang_write_byte(void *v, uint8_t
  BB_SET(bit      );
  delay(1); /* data setup time (250 nS) */
  BB_SET(bit | SCL);
- delay(4); /* clock high time (4.0 uS) */
+ delay(5); /* clock high time (4.0 uS) */
  BB_SET(bit      );
- delay(5); /* clock low time (4.7 uS) */
+ delay(6); /* clock low time (4.7 uS) */
  }
 
  BB_DIR(INPUT);
 
  BB_SET(SDA      );
- delay(5);
+ delay(6);
  BB_SET(SDA | SCL);
- delay(4);
+ delay(5);
  error = (BB_READ & SDA) ? EIO : 0;
  BB_SET(SDA      );
- delay(5);
+ delay(6);
 
  if (flags & I2C_F_STOP)
  (void) i2c_bitbang_send_stop(v, flags, ops);

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Ralf Horstmann-2
* Mark Kettenis <[hidden email]> [2013-03-31 21:33]:

> > Date: Sun, 31 Mar 2013 13:48:39 +0200
> > From: Ralf Horstmann <[hidden email]>
> >
> > * Mark Kettenis <[hidden email]> [2013-03-31 11:51]:
> > > Ralf, Matthieu,
> > >
> > > Yesterday I committed some changes that fix some issues in the SDVO
> > > code.  For my setup, whhere HDMI output is provided over SDVO this
> > > still isn't enough to give me output.  For that I need some further
> > > changes.  But I'm interested to see if what's now in -current works
> > > for you.  Could you send me a dmesg from a kernel with DRMDEBUG enabled?
> >
> > Still doesn't detect the DVI output, but different error messsage now:
>
> Thanks Ralf, looks like your system needs the I2C bit-banging as well.
> I committed the necessary code earlier today.  Make sure ypou have
> revision 1.6 of sys/dev/pci/drm/i915/intel_sdvo.c.  If that still
> doesn't work, try the attached diff as well.

With latest code from CVS it works now. The DVI behind SDVO is detected and
reported correctly in both drm debug and xrandr. See dmesg log below.

For completeness, I tested with the timing diff as well. No problem
found, works fine as well.

Thank you for making my DVI output work again :-)

Regards,
Ralf

OpenBSD 5.3-current (GENERIC.MP) #24: Sun Mar 31 22:01:35 CEST 2013
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
real mem  = 2136797184 (2037MB)
avail mem = 2090242048 (1993MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/07/07, BIOS32 rev. 0 @ 0xfdbf4, SMBIOS rev. 2.4 @ 0xe5550 (53 entries)
bios0: vendor FUJITSU // Phoenix Technologies Ltd. version "Version 1.14" date 05/07/2007
bios0: FUJITSU SIEMENS LIFEBOOK T4215
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT MCFG SSDT SSDT APIC HPET BOOT SLIC
acpi0: wakeup devices PCIB(S4) MODM(S3) HDEF(S3) PXS1(S4) PXS2(S4) LID_(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 8 (PCIB)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 5 (RP03)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature is 100 degC
acpitz1 at acpi0: critical temperature is 100 degC
acpifujitsu at acpi0 not configured
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PWRB
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: CMB1 model "CP293420" serial 1 type LION oem "Fujitsu"
acpibat1 at acpi0: CMB2 not present
acpibtn2 at acpi0: SLPB
acpidock0 at acpi0: REPL docked (15)
bios0: ROM list: 0xc0000/0xec00! 0xcf000/0x1000 0xd0200/0x1000 0xdc000/0x1c00!
cpu0: Enhanced SpeedStep 1996 MHz: speeds: 2000, 1667, 1333, 1000 MHz
memory map conflict 0xfed00000/0x400
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0[drm:pid0:drm_agp_init] agp_available = 1
[drm:pid0:drm_ctxbitmap_next] drm_ctxbitmap_next bit : 0
[drm:pid0:drm_ctxbitmap_init] drm_ctxbitmap_init : 0

[drm:pid0:intel_detect_pch] No PCH detected
inteldrm0: apic 2 int 16
[drm:pid0:drm_vblank_init] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm:pid0:drm_vblank_init] Driver supports precise vblank timestamp query.
[drm:pid0:intel_opregion_setup] graphic opregion physical addr: 0x0
[drm:pid0:intel_opregion_setup] ACPI OpRegion not supported!
[drm:pid0:init_vbt_defaults] Set default to SSC at 100MHz
[drm:pid0:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 96 display_clock_mode 0
[drm:pid0:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:pid0:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:parse_lfp_panel_data] VBT initial LVDS value 40300300
[drm:pid0:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:pid0:parse_sdvo_device_mapping] the SDVO device with slave addr 70 is found on SDVOB port
[drm:pid0:parse_sdvo_device_mapping] SDVO device: dvo=1, addr=70, wiring=1, ddc_pin=29, i2c_pin=5
[drm:pid0:intel_modeset_init] todo set fb base
[drm:pid0:intel_modeset_init] 2 display pipes available.
[drm:pid0:intel_crtc_init] swapping pipes & planes for FBC
[drm:pid0:intel_modeset_init] plane 0 init failed: -19
[drm:pid0:intel_crtc_init] swapping pipes & planes for FBC
[drm:pid0:intel_modeset_init] plane 1 init failed: -19
[drm:pid0:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation
[drm:pid0:intel_lvds_init] using mode from VBT: [drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1024x768" 0 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:intel_panel_get_backlight] get backlight PWM = 15625
[drm:pid0:intel_setup_outputs] probing SDVOB
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 02 43 00 01 01 01 01 00
[drm:pid0:intel_sdvo_get_capabilities] SDVO capabilities:
  vendor_id: 2
  device_id: 67
  device_rev_id: 0
  sdvo_version_major: 1
  sdvo_version_minor: 1
  sdvo_inputs_mask: 1
  smooth_scaling: 0
  sharp_scaling: 0
  up_scaling: 0
  down_scaling: 0
  stall_support: 0
  output_flags: 1
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 9D                         (SDVO_CMD_GET_SUPP_ENCODE)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Not supported)... failed
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 1D                         (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) C4 09 20 4E
[drm:pid0:intel_sdvo_init] SDVOB device VID/DID: 02:43.00, clock range 25MHz - 200MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
[drm:pid0:intel_setup_outputs] probing SDVOC
[drm:pid0:intel_sdvo_read_byte] i2c transfer returned 5
[drm:pid0:intel_sdvo_init] No SDVO device found on SDVOC
[drm:pid0:intel_setup_overlay] initialized overlay support
[drm:pid0:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: disabled
[drm:pid0:intel_modeset_setup_hw_state] [CRTC:4] hw state readout: enabled
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:6:LVDS-6] hw state readout: enabled, pipe=1
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:10:DAC-10] hw state readout: disabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:11:TMDS-11] hw state readout: disabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:15:TV-15] hw state readout: disabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:5:LVDS-1] hw state readout: enabled
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:9:VGA-1] hw state readout: disabled
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:12:DVI-D-1] hw state readout: disabled
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:14:SVIDEO-1] hw state readout: disabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:11:TMDS-11]
[drm:pid0:intel_modeset_check_state] [ENCODER:15:TV-15]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:drm_irq_install] irq=11
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid0:drm_mode_debug_printmodeline] Modeline 29:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid0:intel_crt_detect] CRT not detected via hotplug
[drm:pid0:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] disconnected
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:12:DVI-D-1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid0:intel_sdvo_connector_matches_edid] connector_is_digital? 1, monitor_is_digital? 1
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:12:DVI-D-1] probed modes :
[drm:pid0:drm_mode_debug_printmodeline] Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:drm_mode_debug_printmodeline] Modeline 36:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid0:drm_mode_debug_printmodeline] Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 35:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
[drm:pid0:drm_mode_debug_printmodeline] Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 32:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:14:SVIDEO-1]
[drm:pid0:intel_get_load_detect_pipe] [CONNECTOR:14:SVIDEO-1], [ENCODER:15:TV-15]
[drm:pid0:intel_get_load_detect_pipe] creating tmp fb for load-detection
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 5120
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_crtc_mode_set] [ENCODER:15:TV-15] set [MODE:0:NTSC 480i]
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 34
[drm:pid0:intel_calculate_wm] FIFO watermark level: -5
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 80
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 47
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
[drm:pid0:intel_connector_check_state] [CONNECTOR:14:SVIDEO-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:11:TMDS-11]
[drm:pid0:intel_modeset_check_state] [ENCODER:15:TV-15]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:intel_tv_detect_type] TV detected: c0007, 7f0000aa
[drm:pid0:intel_tv_detect_type] Unrecognised TV connection
[drm:pid0:intel_release_load_detect_pipe] [CONNECTOR:14:SVIDEO-1], [ENCODER:15:TV-15]
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 0, prepare: 0, disable: 1
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 00 00
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:11:TMDS-11]
[drm:pid0:intel_modeset_check_state] [ENCODER:15:TV-15]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:14:SVIDEO-1] disconnected
[drm:pid0:drm_setup_crtcs]
[drm:pid0:drm_enable_connectors] connector 5 enabled? yes
[drm:pid0:drm_enable_connectors] connector 9 enabled? no
[drm:pid0:drm_enable_connectors] connector 12 enabled? yes
[drm:pid0:drm_enable_connectors] connector 14 enabled? no
[drm:pid0:drm_target_preferred] looking for cmdline mode on connector 5
[drm:pid0:drm_pick_cmdline_mode] stub
[drm:pid0:drm_target_preferred] looking for preferred mode on connector 5
[drm:pid0:drm_target_preferred] found mode 1024x768
[drm:pid0:drm_target_preferred] looking for cmdline mode on connector 12
[drm:pid0:drm_pick_cmdline_mode] stub
[drm:pid0:drm_target_preferred] looking for preferred mode on connector 12
[drm:pid0:drm_target_preferred] found mode 1920x1200
[drm:pid0:drm_setup_crtcs] picking CRTCs for 4096x4096 config
[drm:pid0:drm_setup_crtcs] desired mode 1024x768 set on crtc 4
[drm:pid0:drm_setup_crtcs] desired mode 1920x1200 set on crtc 3
[drm:pid0:intelfb_create] allocated 1920x1200 fb: 0x007e0000, bo 0xd8fc8158
[drm:pid0:intelfb_create] skipping call to vga_switcheroo_client_fb_set
[drm:pid0:intel_crtc_set_config] [CRTC:3] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"NTSC 480i" 0 107520 1280 1368 1496 1712 1024 1027 1034 1104 0x40 0x0
[drm:pid0:drm_mode_debug_printmodeline] Modeline 44:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:intel_modeset_stage_output_state] encoder changed, full mode switch
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid0:intel_modeset_stage_output_state] crtc changed, full mode switch
[drm:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid0:drm_mode_debug_printmodeline] Modeline 44:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 44:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_crtc_mode_set] [ENCODER:11:TMDS-11] set [MODE:44:1920x1200]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 07 01 00 00 00             (SDVO_CMD_SET_IN_OUT_MAP)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 11 01 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 16 28 3C 80 A0 70 B0 23 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 17 30 20 36 00 1A 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 9F 00                      (SDVO_CMD_SET_ENCODE)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Not supported)... failed
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 14 28 3C 80 A0 70 B0 23 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 15 30 20 36 00 1A 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 21 01                      (SDVO_CMD_SET_CLOCK_RATE_MULT)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 120
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 03                         (SDVO_CMD_GET_TRAINED_INPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 05 01 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_connector_check_state] [CONNECTOR:12:DVI-D-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:11:TMDS-11]
[drm:pid0:intel_modeset_check_state] [ENCODER:15:TV-15]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:intel_crtc_set_config] [CRTC:4] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 2, prepare: 2, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:4]
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 0
[drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 1: Noop due to uninitialized mode.
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 120
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:i9xx_get_refclk] using SSC reference clock of 96 MHz
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe B:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 43:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid0:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 26, B: 1
[drm:pid0:i9xx_update_wm] self-refresh entries: 120
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 1, C: 2, SR 7
[drm:pid0:i9xx_update_wm] memory self refresh enabled
[drm:pid0:intel_crtc_mode_set] [ENCODER:6:LVDS-6] set [MODE:43:1024x768]
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid0:intel_calculate_wm] FIFO watermark level: 5
[drm:pid0:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid0:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid0:intel_calculate_wm] FIFO watermark level: -20
[drm:pid0:i9xx_update_wm] FIFO watermarks - A: 5, B: 1
[drm:pid0:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1
[drm:pid0:i9xx_update_wm] memory self refresh disabled
[drm:pid0:intel_enable_lvds] applying panel-fitter: 8, 0
[drm:pid0:intel_panel_actually_set_backlight] set backlight PWM = 15625
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_connector_check_state] [CONNECTOR:12:DVI-D-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid0:intel_modeset_check_state] [ENCODER:11:TMDS-11]
[drm:pid0:intel_modeset_check_state] [ENCODER:15:TV-15]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Sigmatel STAC9228X
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 2 int 22
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8055" rev 0x12, Yukon-2 EC Ultra rev. A1 (0x2): apic 2 int 16
msk0 at mskc0 port A: address 00:17:42:41:a8:2d
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 2 int 21
pci2 at ppb1 bus 3
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 2 int 20
pci3 at ppb2 bus 5
5:0:0: mem address conflict 0xf0100000/0x1000
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:1b:77:72:01:7c
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 2 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 2 int 20
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 2 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 2 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 2 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci4 at ppb3 bus 8
cbb0 at pci4 dev 3 function 0 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int 16
cbb1 at pci4 dev 3 function 1 "O2 Micro OZ711MP1 CardBus" rev 0x20: apic 2 int 16, CardBus support disabled
sdhc0 at pci4 dev 3 function 2 "O2 Micro OZ711MP1 SDHC" rev 0x00: apic 2 int 16
sdmmc0 at sdhc0
"O2 Micro OZ711MP1 XDHC" rev 0x00 at pci4 dev 3 function 3 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 9 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-841S, 1.31> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, INTEL SSDSC2MH12, PPG4> SCSI3 0/direct fixed naa.01507a51e26b8cdf
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 2 int 19
iic0 at ichiic0
iic0: addr 0x19 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00 0a=00 0b=00 0c=00 0d=00 0e=00 0f=00 10=00 11=20 24=00 b9=00 ba=00 words 00=0000 01=0000 02=0000 03=0000 04=0040 05=0000 06=0000 07=0000
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
"O2Micro, SmartCardBus Reader, V1.0" at pcmcia1 function 0 not configured
scsibus2 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 15423MB, 512 bytes/sector, 31586304 sectors
uhub5 at uhub0 port 4 "NEC Corporation USB2.0 Hub Controller" rev 2.00/1.00 addr 2
uplcom0 at uhub5 port 2 "Prolific Technology PL2303 Serial" rev 1.10/2.02 addr 3
ucom0 at uplcom0
uhub6 at uhub5 port 4 "Standard Microsystems product 0x2514" rev 2.00/b.b3 addr 4
uhub7 at uhub6 port 2 "GENESYS USB 2.0 HUB" rev 2.00/77.60 addr 5
uhidev0 at uhub7 port 1 configuration 1 interface 0 "Logitech Optical USB Mouse" rev 2.00/3.40 addr 6
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub7 port 3 configuration 1 interface 0 "Alcor Micro product 0x3108" rev 1.10/3.01 addr 7
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub7 port 3 configuration 1 interface 1 "Alcor Micro product 0x3108" rev 1.10/3.01 addr 7
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uaudio0 at uhub7 port 4 configuration 1 interface 0 "C-Media Electronics Inc. USB Multimedia Audio Device" rev 1.10/1.00 addr 8
uaudio0: audio rev 1.00, 8 mixer controls
audio1 at uaudio0
uhidev3 at uhub7 port 4 configuration 1 interface 3 "C-Media Electronics Inc. USB Multimedia Audio Device" rev 1.10/1.00 addr 8
uhidev3: iclass 3/0
uhid2 at uhidev3: input=16, output=16, feature=0
ugen0 at uhub3 port 1 "vendor 0x0c24 product 0x000f" rev 2.00/19.15 addr 2
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid4:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:drm_output_poll_execute] [CONNECTOR:12:DVI-D-1] status updated from 1 to 1
[drm:pid4:drm_output_poll_execute] [CONNECTOR:14:SVIDEO-1] status updated from 2 to 2
ugen1 at uhub3 port 2 "AuthenTec Fingerprint Sensor" rev 1.10/6.21 addr 3
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (3e4d92862aa71140.a) swap on sd0b dump on sd0b
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid4:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:drm_output_poll_execute] [CONNECTOR:12:DVI-D-1] status updated from 1 to 1
[drm:pid4:drm_output_poll_execute] [CONNECTOR:14:SVIDEO-1] status updated from 2 to 2
sd2 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd2: 80821MB, 512 bytes/sector, 165522270 sectors
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid4:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:drm_output_poll_execute] [CONNECTOR:12:DVI-D-1] status updated from 1 to 1
[drm:pid4:drm_output_poll_execute] [CONNECTOR:14:SVIDEO-1] status updated from 2 to 2
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid4:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:drm_output_poll_execute] [CONNECTOR:12:DVI-D-1] status updated from 1 to 1
[drm:pid4:drm_output_poll_execute] [CONNECTOR:14:SVIDEO-1] status updated from 2 to 2
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid4:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:drm_output_poll_execute] [CONNECTOR:12:DVI-D-1] status updated from 1 to 1
[drm:pid4:drm_output_poll_execute] [CONNECTOR:14:SVIDEO-1] status updated from 2 to 2
[drm:pid4:intel_crtc_set_config] [CRTC:3] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid4:intel_crtc_set_config] [CRTC:4] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid30859:drmopen] open_count = 0
[drm:pid30859:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid30859:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid30859:drm_firstopen]
[drm:pid30859:drmopen] minor = 1
[drm:pid29651:drmclose] open_count = 1
[drm:pid29651:drmclose] pid = 29651, device = 0xd3019400, open_count = 1
[drm:pid29651:drm_lastclose]
[drm:pid29651:intel_crtc_set_config] [CRTC:3] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid29651:intel_crtc_set_config] [CRTC:4] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid30859:drmopen] open_count = 0
[drm:pid30859:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid30859:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid30859:drm_firstopen]
[drm:pid30859:drmopen] minor = 1
[drm:pid29651:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4]
[drm:pid29651:drmclose] open_count = 1
[drm:pid29651:drmclose] pid = 29651, device = 0xd3019400, open_count = 1
[drm:pid29651:drm_lastclose]
[drm:pid29651:intel_crtc_set_config] [CRTC:3] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid29651:intel_crtc_set_config] [CRTC:4] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid30859:drmopen] open_count = 0
[drm:pid30859:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid30859:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid30859:drm_firstopen]
[drm:pid30859:drmopen] minor = 1
[drm:pid29651:drmclose] open_count = 1
[drm:pid29651:drmclose] pid = 29651, device = 0xd3019400, open_count = 1
[drm:pid29651:drm_lastclose]
[drm:pid29651:intel_crtc_set_config] [CRTC:3] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid29651:intel_crtc_set_config] [CRTC:4] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid30859:drmopen] open_count = 0
[drm:pid30859:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid30859:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid30859:drm_firstopen]
[drm:pid30859:drmopen] minor = 1
[drm:pid29651:drmclose] open_count = 1
[drm:pid29651:drmclose] pid = 29651, device = 0xd3019400, open_count = 1
[drm:pid29651:drm_lastclose]
[drm:pid29651:intel_crtc_set_config] [CRTC:3] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid29651:intel_crtc_set_config] [CRTC:4] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid30859:drmopen] open_count = 0
[drm:pid30859:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid30859:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid30859:drm_firstopen]
[drm:pid30859:drmopen] minor = 1
[drm:pid29651:drmclose] open_count = 1
[drm:pid29651:drmclose] pid = 29651, device = 0xd3019400, open_count = 1
[drm:pid29651:drm_lastclose]
[drm:pid29651:intel_crtc_set_config] [CRTC:3] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid29651:intel_crtc_set_config] [CRTC:4] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid30859:drmopen] open_count = 0
[drm:pid30859:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid30859:drm_addmap] Added map 2 0x2fee000/0x2000
[drm:pid30859:drm_firstopen]
[drm:pid30859:drmopen] minor = 1
[drm:pid29651:i915_getparam] Unknown parameter 19
[drm:pid29651:i915_getparam] Unknown parameter 21
[drm:pid29651:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4]
[drm:pid29651:drm_mode_getresources] [CRTC:3]
[drm:pid29651:drm_mode_getresources] [CRTC:4]
[drm:pid29651:drm_mode_getresources] [ENCODER:6:LVDS-6]
[drm:pid29651:drm_mode_getresources] [ENCODER:10:DAC-10]
[drm:pid29651:drm_mode_getresources] [ENCODER:11:TMDS-11]
[drm:pid29651:drm_mode_getresources] [ENCODER:15:TV-15]
[drm:pid29651:drm_mode_getresources] [CONNECTOR:5:LVDS-1]
[drm:pid29651:drm_mode_getresources] [CONNECTOR:9:VGA-1]
[drm:pid29651:drm_mode_getresources] [CONNECTOR:12:DVI-D-1]
[drm:pid29651:drm_mode_getresources] [CONNECTOR:14:SVIDEO-1]
[drm:pid29651:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4]
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 29:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid29651:intel_crt_detect] CRT not detected via hotplug
[drm:pid29651:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] disconnected
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid29651:intel_crt_detect] CRT not detected via hotplug
[drm:pid29651:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] disconnected
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:12:?]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:12:DVI-D-1]
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid29651:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid29651:intel_sdvo_connector_matches_edid] connector_is_digital? 1, monitor_is_digital? 1
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:12:DVI-D-1] probed modes :
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 36:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 35:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 32:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:12:?]
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:14:?]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:14:SVIDEO-1]
[drm:pid29651:intel_get_load_detect_pipe] [CONNECTOR:14:SVIDEO-1], [ENCODER:15:TV-15]
[drm:pid29651:intel_get_load_detect_pipe] no pipe available for load-detect
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:14:SVIDEO-1] probed modes :
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 63:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 60:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 62:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 61:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:14:?]
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes :
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 29:"1024x768" 60 65000 1024 1048 1184 1248 768 771 777 868 0x8 0xa
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid29651:intel_crt_detect] CRT not detected via hotplug
[drm:pid29651:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] disconnected
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:9:?]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1]
[drm:pid29651:intel_crt_detect] CRT not detected via hotplug
[drm:pid29651:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:9:VGA-1] disconnected
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:12:?]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:12:DVI-D-1]
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid29651:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid29651:intel_sdvo_connector_matches_edid] connector_is_digital? 1, monitor_is_digital? 1
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:12:DVI-D-1] probed modes :
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 31:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 36:"1920x1080" 60 172780 1920 2040 2248 2576 1080 1081 1084 1118 0x0 0x6
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 34:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 35:"1680x1050" 60 119000 1680 1728 1760 1840 1050 1053 1059 1080 0x40 0x9
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 33:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 32:"1280x960" 60 108000 1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 40:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 37:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 38:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 39:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:12:?]
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:14:?]
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:14:SVIDEO-1]
[drm:pid29651:intel_get_load_detect_pipe] [CONNECTOR:14:SVIDEO-1], [ENCODER:15:TV-15]
[drm:pid29651:intel_get_load_detect_pipe] no pipe available for load-detect
[drm:pid29651:drm_helper_probe_single_connector_modes] [CONNECTOR:14:SVIDEO-1] probed modes :
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 63:"848x480" 60 29027 848 849 912 944 480 481 512 513 0x48 0x0
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 60:"640x480" 60 22631 640 641 704 736 480 481 512 513 0x48 0x0
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 62:"1024x768" 60 53773 1024 1025 1088 1120 768 769 800 801 0x40 0x0
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 61:"800x600" 60 33996 800 801 864 896 600 601 632 633 0x40 0x0
[drm:pid29651:drm_mode_getconnector] [CONNECTOR:14:?]
[drm:pid29651:intel_panel_actually_set_backlight] set backlight PWM = 15625
[drm:pid29651:intel_panel_actually_set_backlight] set backlight PWM = 15625
[drm:pid29651:drm_mode_addfb] [FB:80]
[drm:pid29651:drm_mode_setcrtc] [CRTC:3]
[drm:pid29651:drm_mode_setcrtc] [CONNECTOR:12:DVI-D-1]
[drm:pid29651:intel_crtc_set_config] [CRTC:3] [FB:80] #connectors=1 (x y) (0 0)
[drm:pid29651:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 44:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid29651:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid29651:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid29651:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid29651:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid29651:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid29651:intel_calculate_wm] FIFO watermark level: 5
[drm:pid29651:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid29651:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid29651:i9xx_update_wm] self-refresh entries: 64
[drm:pid29651:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid29651:i9xx_update_wm] memory self refresh enabled
[drm:pid29651:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid29651:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid29651:i9xx_update_plane] Writing base 01400000 00000000 0 0 4096
[drm:pid29651:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid29651:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid29651:intel_calculate_wm] FIFO watermark level: 5
[drm:pid29651:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid29651:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid29651:i9xx_update_wm] self-refresh entries: 64
[drm:pid29651:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid29651:i9xx_update_wm] memory self refresh enabled
[drm:pid29651:intel_crtc_mode_set] [ENCODER:11:TMDS-11] set [MODE:81:1024x768]
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 07 01 00 00 00             (SDVO_CMD_SET_IN_OUT_MAP)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 11 01 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 16 64 19 00 40 41 00 26 30 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 17 18 88 36 00 18 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 9F 00                      (SDVO_CMD_SET_ENCODE)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Not supported)... failed
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 14 64 19 00 40 41 00 26 30 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 15 18 88 36 00 18 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 21 02                      (SDVO_CMD_SET_CLOCK_RATE_MULT)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid29651:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid29651:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid29651:intel_calculate_wm] FIFO watermark level: 5
[drm:pid29651:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid29651:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid29651:intel_calculate_wm] FIFO watermark level: 8
[drm:pid29651:i9xx_update_wm] FIFO watermarks - A: 5, B: 8
[drm:pid29651:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 8, C: 2, SR 1
[drm:pid29651:i9xx_update_wm] memory self refresh disabled
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 03                         (SDVO_CMD_GET_TRAINED_INPUTS)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success) 01
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 05 01 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid29651:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid29651:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid29651:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid29651:intel_connector_check_state] [CONNECTOR:12:DVI-D-1]
[drm:pid29651:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid29651:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid29651:intel_modeset_check_state] [ENCODER:11:TMDS-11]
[drm:pid29651:intel_modeset_check_state] [ENCODER:15:TV-15]
[drm:pid29651:intel_modeset_check_state] [CRTC:3]
[drm:pid29651:intel_modeset_check_state] [CRTC:4]
[drm:pid29651:drm_mode_setcrtc] [CRTC:4]
[drm:pid29651:drm_mode_setcrtc] [CONNECTOR:5:LVDS-1]
[drm:pid29651:intel_crtc_set_config] [CRTC:4] [FB:80] #connectors=1 (x y) (0 0)
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid29651:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid29651:i9xx_update_plane] Writing base 01400000 00000000 0 0 4096
[drm:pid29651:i915_getparam] Unknown parameter 19
[drm:pid29651:intel_crtc_cursor_set] cursor off
[drm:pid29651:intel_crtc_cursor_set] cursor off
[drm:pid4:intel_crtc_set_config] [CRTC:3] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid4:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid4:drm_mode_debug_printmodeline] Modeline 81:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x0 0xa
[drm:pid4:drm_mode_debug_printmodeline] Modeline 44:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid4:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid4:drm_mode_debug_printmodeline] Modeline 44:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid4:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid4:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid4:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid4:intel_calculate_wm] FIFO watermark level: 5
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid4:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid4:i9xx_update_wm] self-refresh entries: 64
[drm:pid4:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid4:i9xx_update_wm] memory self refresh enabled
[drm:pid4:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid4:drm_mode_debug_printmodeline] Modeline 44:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9
[drm:pid4:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid4:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid4:intel_calculate_wm] FIFO watermark level: 5
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid4:i9xx_update_wm] FIFO watermarks - A: 5, B: 29
[drm:pid4:i9xx_update_wm] self-refresh entries: 64
[drm:pid4:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 29, C: 2, SR 63
[drm:pid4:i9xx_update_wm] memory self refresh enabled
[drm:pid4:intel_crtc_mode_set] [ENCODER:11:TMDS-11] set [MODE:44:1920x1200]
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 07 01 00 00 00             (SDVO_CMD_SET_IN_OUT_MAP)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 11 01 00                   (SDVO_CMD_SET_TARGET_OUTPUT)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 16 28 3C 80 A0 70 B0 23 40 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART1)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 17 30 20 36 00 1A 00 00 00 (SDVO_CMD_SET_OUTPUT_TIMINGS_PART2)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 9F 00                      (SDVO_CMD_SET_ENCODE)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Not supported)... failed
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 14 28 3C 80 A0 70 B0 23 40 (SDVO_CMD_SET_INPUT_TIMINGS_PART1)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 15 30 20 36 00 1A 00 00 00 (SDVO_CMD_SET_INPUT_TIMINGS_PART2)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 21 01                      (SDVO_CMD_SET_CLOCK_RATE_MULT)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:pid4:intel_calculate_wm] FIFO entries required for mode: 21
[drm:pid4:intel_calculate_wm] FIFO watermark level: 5
[drm:pid4:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:pid4:intel_calculate_wm] FIFO entries required for mode: 49
[drm:pid4:intel_calculate_wm] FIFO watermark level: -20
[drm:pid4:i9xx_update_wm] FIFO watermarks - A: 5, B: 1
[drm:pid4:i9xx_update_wm] Setting FIFO watermarks - A: 5, B: 1, C: 2, SR 1
[drm:pid4:i9xx_update_wm] memory self refresh disabled
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 03                         (SDVO_CMD_GET_TRAINED_INPUTS)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success) 01
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 05 01 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid4:intel_connector_check_state] [CONNECTOR:5:LVDS-1]
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid4:intel_connector_check_state] [CONNECTOR:12:DVI-D-1]
[drm:pid4:intel_modeset_check_state] [ENCODER:6:LVDS-6]
[drm:pid4:intel_modeset_check_state] [ENCODER:10:DAC-10]
[drm:pid4:intel_modeset_check_state] [ENCODER:11:TMDS-11]
[drm:pid4:intel_modeset_check_state] [ENCODER:15:TV-15]
[drm:pid4:intel_modeset_check_state] [CRTC:3]
[drm:pid4:intel_modeset_check_state] [CRTC:4]
[drm:pid4:intel_crtc_set_config] [CRTC:4] [FB:45] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:LVDS-1] to [CRTC:4]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:12:DVI-D-1] to [CRTC:3]
[drm:pid4:i9xx_update_plane] Writing base 007E0000 00000000 0 0 7680
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid4:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:drm_output_poll_execute] [CONNECTOR:12:DVI-D-1] status updated from 1 to 1
[drm:pid4:drm_output_poll_execute] [CONNECTOR:14:SVIDEO-1] status updated from 3 to 3
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid4:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:drm_output_poll_execute] [CONNECTOR:12:DVI-D-1] status updated from 1 to 1
[drm:pid4:drm_output_poll_execute] [CONNECTOR:14:SVIDEO-1] status updated from 3 to 3
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid4:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid4:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid4:drm_output_poll_execute] [CONNECTOR:12:DVI-D-1] status updated from 1 to 1
[drm:pid4:drm_output_poll_execute] [CONNECTOR:14:SVIDEO-1] status updated from 3 to 3

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Matthieu Herrb
In reply to this post by Mark Kettenis
On Sun, Mar 31, 2013 at 11:51:55AM +0200, Mark Kettenis wrote:

> > Date: Fri, 29 Mar 2013 15:22:57 +0100
>
> Ralf, Matthieu,
>
> Yesterday I committed some changes that fix some issues in the SDVO
> code.  For my setup, whhere HDMI output is provided over SDVO this
> still isn't enough to give me output.  For that I need some further
> changes.  But I'm interested to see if what's now in -current works
> for you.  Could you send me a dmesg from a kernel with DRMDEBUG enabled?
>

Hi Mark,


I've tried with intel_svdo.c 1.6 and the bitbang timing patch, my
system still doesn't work. Below is dmesg with DRMDEBUG defined and
Xorg.0.log.

1(S4) UAR1(S4) PS2K(S4) PS2M(S4) EUSB(S4) USBE(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) P0P4(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz ("GenuineIntel" 686-class) 2.14 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,LONG,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,LAHF,PERF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P2)
acpiprt2 at acpi0: bus 4 (P0P1)
acpiprt3 at acpi0: bus -1 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus 2 (P0P8)
acpiprt7 at acpi0: bus 1 (P0P9)
acpiprt8 at acpi0: bus 3 (P0P4)
acpicpu0 at acpi0
acpicpu1 at acpi0
aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM
acpibtn0 at acpi0: PWRB
bios0: ROM list: 0xc0000/0xb000! 0xcb000/0x1000 0xcc000/0x3000! 0xcf000/0x800
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82G965 Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0[drm:pid0:drm_agp_init] agp_available = 1
[drm:pid0:drm_ctxbitmap_next] drm_ctxbitmap_next bit : 0
[drm:pid0:drm_ctxbitmap_init] drm_ctxbitmap_init : 0

[drm:pid0:intel_detect_pch] No PCH detected
inteldrm0: apic 2 int 16
[drm:pid0:drm_vblank_init] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm:pid0:drm_vblank_init] Driver supports precise vblank timestamp query.
[drm:pid0:intel_opregion_setup] graphic opregion physical addr: 0x7e79e0e4
[drm:pid0:intel_opregion_setup] Public ACPI methods supported
[drm:pid0:intel_opregion_setup] SWSCI supported
[drm:pid0:intel_opregion_setup] ASLE supported
[drm:pid0:init_vbt_defaults] Set default to SSC at 100MHz
[drm:pid0:intel_parse_bios] Using VBT from OpRegion: $VBT BROADWATER-G   d
[drm:pid0:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1 int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96 display_clock_mode 0
[drm:pid0:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:pid0:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:pid0:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[drm:pid0:parse_device_mapping] no child dev is parsed from VBT
[drm:pid0:intel_modeset_init] todo set fb base
[drm:pid0:intel_modeset_init] 2 display pipes available.
[drm:pid0:intel_modeset_init] plane 0 init failed: -19
[drm:pid0:intel_modeset_init] plane 1 init failed: -19
[drm:pid0:intel_pch_pll_init] No PCH PLLs on this hardware, skipping initialisation
[drm:pid0:intel_setup_outputs] probing SDVOB
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 02                         (SDVO_CMD_GET_DEVICE_CAPS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 04 AA 02 00 01 01 01 00
[drm:pid0:intel_sdvo_get_capabilities] SDVO capabilities:
  vendor_id: 4
  device_id: 170
  device_rev_id: 2
  sdvo_version_major: 0
  sdvo_version_minor: 1
  sdvo_inputs_mask: 1
  smooth_scaling: 0
  sharp_scaling: 0
  up_scaling: 0
  down_scaling: 0
  stall_support: 0
  output_flags: 1
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 0C                         (SDVO_CMD_GET_HOT_PLUG_SUPPORT)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 0D 01 00                   (SDVO_CMD_SET_ACTIVE_HOT_PLUG)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 9D                         (SDVO_CMD_GET_SUPP_ENCODE)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Not supported)... failed
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 10 00                      (SDVO_CMD_SET_TARGET_INPUT)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success)
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 1D                         (SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) C4 09 74 40
[drm:pid0:intel_sdvo_init] SDVOB device VID/DID: 04:AA.02, clock range 25MHz - 165MHz, input 1: Y, input 2: N, output 1: Y, output 2: N
[drm:pid0:intel_setup_outputs] probing SDVOC
[drm:pid0:intel_sdvo_read_byte] i2c transfer returned 5
[drm:pid0:intel_sdvo_init] No SDVO device found on SDVOC
intel_overlay_map_regs partial stub
[drm:pid0:intel_modeset_setup_hw_state] [CRTC:3] hw state readout: enabled
[drm:pid0:intel_modeset_setup_hw_state] [CRTC:4] hw state readout: enabled
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:6:DAC-6] hw state readout: enabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [ENCODER:7:TMDS-7] hw state readout: enabled, pipe=0
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:5:VGA-1] hw state readout: enabled
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_modeset_setup_hw_state] [CONNECTOR:8:DVI-D-1] hw state readout: enabled
[drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 1: Noop due to uninitialized mode.
[drm:pid0:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[drm:pid0:intel_sanitize_crtc] [CRTC:4] hw state adjusted, was enabled, now disabled
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:VGA-1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_connector_check_state] [CONNECTOR:8:DVI-D-1]
[drm:pid0:intel_modeset_check_state] [ENCODER:6:DAC-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:7:TMDS-7]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:drm_irq_install] irq=11
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:pid0:intel_crt_detect] CRT detected via hotplug
[drm:pid0:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1] probed modes :
[drm:pid0:drm_mode_debug_printmodeline] Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 19:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 20:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 22:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 24:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 23:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 13:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:pid0:drm_mode_debug_printmodeline] Modeline 15:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 16:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid0:drm_mode_debug_printmodeline] Modeline 18:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid0:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1] disconnected
[drm:pid0:drm_setup_crtcs]
[drm:pid0:drm_enable_connectors] connector 5 enabled? yes
[drm:pid0:drm_enable_connectors] connector 8 enabled? no
[drm:pid0:drm_target_preferred] looking for cmdline mode on connector 5
[drm:pid0:drm_pick_cmdline_mode] stub
[drm:pid0:drm_target_preferred] looking for preferred mode on connector 5
[drm:pid0:drm_target_preferred] found mode 1024x768
[drm:pid0:drm_setup_crtcs] picking CRTCs for 8192x8192 config
[drm:pid0:drm_setup_crtcs] desired mode 1024x768 set on crtc 3
[drm:pid0:intelfb_create] allocated 1024x768 fb: 0x007a0000, bo 0xd8f370ac
[drm:pid0:intelfb_create] skipping call to vga_switcheroo_client_fb_set
[drm:pid0:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid0:intel_set_config_compute_mode_changes] crtc has no fb, full mode set
[drm:pid0:intel_set_config_compute_mode_changes] modes are different, full mode set
[drm:pid0:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:pid0:drm_mode_debug_printmodeline] Modeline 25:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:8:DVI-D-1] to [NOCRTC]
[drm:pid0:intel_modeset_stage_output_state] encoder changed, full mode switch
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid0:intel_modeset_stage_output_state] crtc changed, full mode switch
[drm:pid0:intel_crtc_set_config] attempting to set mode from userspace
[drm:pid0:drm_mode_debug_printmodeline] Modeline 25:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[drm:pid0:intel_set_mode] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[drm:pid0:intel_modeset_adjusted_mode] [CRTC:3]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 05 00 00                   (SDVO_CMD_SET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_write_cmd] sdvo i2c transfer failed
[drm:pid0:drm_calc_vbltimestamp_from_scanoutpos] crtc 0: Noop due to uninitialized mode.
[drm:pid0:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[drm:pid0:i9xx_crtc_mode_set] Mode for pipe A:
[drm:pid0:drm_mode_debug_printmodeline] Modeline 25:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[drm:pid0:i9xx_update_plane] Writing base 007A0000 00000000 0 0 4096
[drm:pid0:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 1
[drm:pid0:intel_crtc_mode_set] [ENCODER:6:DAC-6] set [MODE:25:1024x768]
[drm:pid0:i965_update_wm] self-refresh entries: 64, wm: 448
[drm:pid0:i965_update_wm] self-refresh watermark: display plane 448 cursor 32
[drm:pid0:i965_update_wm] Setting FIFO watermarks - A: 8, B: 8, C: 8, SR 448
[drm:pid0:intel_connector_check_state] [CONNECTOR:5:VGA-1]
[drm:pid0:intel_sdvo_debug_write] SDVOB: W: 04                         (SDVO_CMD_GET_ACTIVE_OUTPUTS)
[drm:pid0:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid0:intel_connector_check_state] [CONNECTOR:8:DVI-D-1]
active connector not linked to encoder
encoder->connectors_active not set
encoder not enabled
WARNING !encoder->base.crtc failed at /local/OpenBSD/src/sys/dev/pci/drm/i915/intel_display.c:4414
[drm:pid0:intel_modeset_check_state] [ENCODER:6:DAC-6]
[drm:pid0:intel_modeset_check_state] [ENCODER:7:TMDS-7]
[drm:pid0:intel_modeset_check_state] [CRTC:3]
[drm:pid0:intel_modeset_check_state] [CRTC:4]
[drm:pid0:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid0:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82G965 Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 17
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x02: msi
azalia0: codecs: Analog Devices AD1988A
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: apic 2 int 17
pci1 at ppb0 bus 3
em0 at pci1 dev 0 function 0 "Intel PRO/1000 PT (82572EI)" rev 0x06: apic 2 int 16, address 00:1b:21:00:9d:43
ppb1 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: apic 2 int 17
pci2 at ppb1 bus 2
jmb0 at pci2 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x02
ahci0 at jmb0: apic 2 int 16, AHCI 1.0
scsibus0 at ahci0: 32 targets
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 2 int 16 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <PLEXTOR, CD-ROM PX-54TA, 1.00> ATAPI 5/cdrom removable
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
ppb2 at pci0 dev 28 function 5 "Intel 82801H PCIE" rev 0x02: apic 2 int 16
pci3 at ppb2 bus 1
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x01: RTL8168 2 (0x3800), apic 2 int 17, address 00:18:f3:06:61:d5
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci4 at ppb3 bus 4
"TI TSB43AB22 FireWire" rev 0x00 at pci4 dev 1 function 0 not configured
ahc0 at pci4 dev 4 function 0 "Adaptec AHA-2940" rev 0x03: apic 2 int 17
scsibus2 at ahc0: 8 targets, initiator 7
ichpcib0 at pci0 dev 31 function 0 "Intel 82801H LPC" rev 0x02: PM disabled
pciide1 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HDS728080PLA380>
wd0: 16-sector PIO, LBA48, 78533MB, 160836480 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x02: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5
pciide2 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 19 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
[drm:pid0:i965_intr] hotplug event received, stat 0x00000300
mtrr: Pentium Pro MTRR support
uhidev0 at uhub5 port 2 configuration 1 interface 0 "eGalax Inc. USB TouchController" rev 1.10/1.00 addr 2
uhid0 at uhidev0 reportid 1: input=5, output=0, feature=0
uhts0 at uhidev0 reportid 2
wsmouse0 at uhts0 mux 0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on wd0a swap on wd0b dump on wd0b
ehci0: port reset timeout
uhub0: port 3 reset failed
[drm:pid4:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid4:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid4:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid22781:drmopen] open_count = 0
[drm:pid22781:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid22781:drm_addmap] Added map 2 0x2e32000/0x2000
[drm:pid22781:drm_firstopen]
[drm:pid22781:drmopen] minor = 1
[drm:pid3426:drmclose] open_count = 1
[drm:pid3426:drmclose] pid = 3426, device = 0xd2fcd400, open_count = 1
[drm:pid3426:drm_lastclose]
[drm:pid3426:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid3426:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid22781:drmopen] open_count = 0
[drm:pid22781:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid22781:drm_addmap] Added map 2 0x2e32000/0x2000
[drm:pid22781:drm_firstopen]
[drm:pid22781:drmopen] minor = 1
[drm:pid3426:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
[drm:pid3426:drmclose] open_count = 1
[drm:pid3426:drmclose] pid = 3426, device = 0xd2fcd400, open_count = 1
[drm:pid3426:drm_lastclose]
[drm:pid3426:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid3426:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid22781:drmopen] open_count = 0
[drm:pid22781:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid22781:drm_addmap] Added map 2 0x2e32000/0x2000
[drm:pid22781:drm_firstopen]
[drm:pid22781:drmopen] minor = 1
[drm:pid3426:drmclose] open_count = 1
[drm:pid3426:drmclose] pid = 3426, device = 0xd2fcd400, open_count = 1
[drm:pid3426:drm_lastclose]
[drm:pid3426:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid3426:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid22781:drmopen] open_count = 0
[drm:pid22781:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid22781:drm_addmap] Added map 2 0x2e32000/0x2000
[drm:pid22781:drm_firstopen]
[drm:pid22781:drmopen] minor = 1
[drm:pid3426:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
[drm:pid3426:drmclose] open_count = 1
[drm:pid3426:drmclose] pid = 3426, device = 0xd2fcd400, open_count = 1
[drm:pid3426:drm_lastclose]
[drm:pid3426:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid3426:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid22781:drmopen] open_count = 0
[drm:pid22781:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid22781:drm_addmap] Added map 2 0x2e32000/0x2000
[drm:pid22781:drm_firstopen]
[drm:pid22781:drmopen] minor = 1
[drm:pid3426:drmclose] open_count = 1
[drm:pid3426:drmclose] pid = 3426, device = 0xd2fcd400, open_count = 1
[drm:pid3426:drm_lastclose]
[drm:pid3426:intel_crtc_set_config] [CRTC:3] [FB:26] #connectors=1 (x y) (0 0)
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid3426:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid22781:drmopen] open_count = 0
[drm:pid22781:drm_addmap] offset = 0x00000000, size = 0x00002000, type = 2
[drm:pid22781:drm_addmap] Added map 2 0x2e32000/0x2000
[drm:pid22781:drm_firstopen]
[drm:pid22781:drmopen] minor = 1
[drm:pid3426:i915_getparam] Unknown parameter 21
[drm:pid3426:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
[drm:pid3426:drm_mode_getresources] [CRTC:3]
[drm:pid3426:drm_mode_getresources] [CRTC:4]
[drm:pid3426:drm_mode_getresources] [ENCODER:6:DAC-6]
[drm:pid3426:drm_mode_getresources] [ENCODER:7:TMDS-7]
[drm:pid3426:drm_mode_getresources] [CONNECTOR:5:VGA-1]
[drm:pid3426:drm_mode_getresources] [CONNECTOR:8:DVI-D-1]
[drm:pid3426:drm_mode_getresources] CRTC[2] CONNECTORS[2] ENCODERS[2]
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:pid3426:intel_crt_detect] CRT detected via hotplug
[drm:pid3426:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1] probed modes :
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 19:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 20:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 22:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 24:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 23:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 13:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 15:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 16:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 18:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:8:?]
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1]
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid3426:intel_sdvo_read_response] SDVOB: R: (Success) 01 00
[drm:pid3426:intel_sdvo_detect] SDVO response 1 0 [1]
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1] disconnected
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:8:?]
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1]
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid3426:intel_sdvo_write_cmd] sdvo i2c transfer failed
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid3426:intel_sdvo_connector_matches_edid] connector_is_digital? 1, monitor_is_digital? 0
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:pid3426:intel_crt_detect] CRT detected via hotplug
[drm:pid3426:drm_edid_to_eld] ELD: no CEA Extension found
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1] probed modes :
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 21:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x48 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 19:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 20:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 22:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 24:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 23:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 12:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 13:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 15:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 16:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[drm:pid3426:drm_mode_debug_printmodeline] Modeline 18:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:8:?]
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1]
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid3426:intel_sdvo_write_cmd] sdvo i2c transfer failed
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid3426:intel_sdvo_connector_matches_edid] connector_is_digital? 1, monitor_is_digital? 0
[drm:pid3426:drm_mode_getconnector] [CONNECTOR:8:?]
[drm:pid3426:drm_helper_probe_single_connector_modes] [CONNECTOR:8:DVI-D-1]
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 0B                         (SDVO_CMD_GET_ATTACHED_DISPLAYS)
[drm:pid3426:intel_sdvo_write_cmd] sdvo i2c transfer failed
[drm:pid3426:intel_sdvo_debug_write] SDVOB: W: 7A 02                      (SDVO_CMD_SET_CONTROL_BUS_SWITCH)
[drm:pid3426:intel_sdvo_connector_matches_edid] connector_is_digital? 1, monitor_is_digital? 0
[drm:pid3426:drm_mode_addfb] [FB:58]
[drm:pid3426:drm_mode_setcrtc] [CRTC:3]
[drm:pid3426:drm_mode_setcrtc] [CONNECTOR:5:VGA-1]
[drm:pid3426:intel_crtc_set_config] [CRTC:3] [FB:58] #connectors=1 (x y) (0 0)
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:pid3426:i9xx_update_plane] Writing base 00CF5000 00000000 0 0 4096
[drm:pid3426:drm_mode_setcrtc] [CRTC:4]
[drm:pid3426:intel_crtc_set_config] [CRTC:4] [NOFB]
[drm:pid3426:intel_modeset_stage_output_state] [CONNECTOR:5:VGA-1] to [CRTC:3]

[   231.667] (--) checkDevMem: using aperture driver /dev/xf86
[   231.681] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)
[   231.733]
X.Org X Server 1.13.3
Release Date: 2013-03-07
[   231.733] X Protocol Version 11, Revision 0
[   231.733] Build Operating System: OpenBSD 5.3 i386
[   231.733] Current Operating System: OpenBSD harvest.herrb.net 5.3 GENERIC.MP#107 i386
[   231.733] Build Date: 10 March 2013  01:52:07PM
[   231.733]  
[   231.733] Current version of pixman: 0.28.0
[   231.733] Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   231.733] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   231.733] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Apr  1 09:58:59 2013
[   231.773] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[   231.783] (==) No Layout section.  Using the first Screen section.
[   231.783] (==) No screen section available. Using defaults.
[   231.783] (**) |-->Screen "Default Screen Section" (0)
[   231.783] (**) |   |-->Monitor "<default monitor>"
[   231.784] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   231.784] (==) Disabling SIGIO handlers for input devices
[   231.784] (==) Automatically adding devices
[   231.784] (==) Automatically enabling devices
[   231.784] (==) Not automatically adding GPU devices
[   231.894] (==) FontPath set to:
        /usr/X11R6/lib/X11/fonts/misc/,
        /usr/X11R6/lib/X11/fonts/TTF/,
        /usr/X11R6/lib/X11/fonts/OTF/,
        /usr/X11R6/lib/X11/fonts/Type1/,
        /usr/X11R6/lib/X11/fonts/100dpi/,
        /usr/X11R6/lib/X11/fonts/75dpi/
[   231.894] (==) ModulePath set to "/usr/X11R6/lib/modules"
[   231.894] (II) The server relies on wscons to provide the list of input devices.
        If no devices become available, reconfigure wscons or disable AutoAddDevices.
[   231.902] (II) Loader magic: 0x3c0240c0
[   231.902] (II) Module ABI versions:
[   231.902] X.Org ANSI C Emulation: 0.4
[   231.903] X.Org Video Driver: 13.1
[   231.903] X.Org XInput driver : 18.0
[   231.903] X.Org Server Extension : 7.0
[   231.906] (--) PCI:*(0:0:2:0) 8086:29a2:1043:81ea rev 2, Mem @ 0xffa00000/1048576, 0xd0000000/268435456, I/O @ 0x0000ec00/8
[   231.906] (--) PCI: (0:0:2:1) 8086:29a3:1043:81ea rev 2, Mem @ 0xff800000/1048576
[   231.906] Initializing built-in extension Generic Event Extension
[   231.906] Initializing built-in extension SHAPE
[   231.906] Initializing built-in extension MIT-SHM
[   231.906] Initializing built-in extension XInputExtension
[   231.906] Initializing built-in extension XTEST
[   231.906] Initializing built-in extension BIG-REQUESTS
[   231.906] Initializing built-in extension SYNC
[   231.906] Initializing built-in extension XKEYBOARD
[   231.906] Initializing built-in extension XC-MISC
[   231.906] Initializing built-in extension SECURITY
[   231.906] Initializing built-in extension XINERAMA
[   231.906] Initializing built-in extension XFIXES
[   231.906] Initializing built-in extension RENDER
[   231.906] Initializing built-in extension RANDR
[   231.906] Initializing built-in extension COMPOSITE
[   231.906] Initializing built-in extension DAMAGE
[   231.906] Initializing built-in extension MIT-SCREEN-SAVER
[   231.906] Initializing built-in extension DOUBLE-BUFFER
[   231.906] Initializing built-in extension RECORD
[   231.906] Initializing built-in extension DPMS
[   231.906] Initializing built-in extension X-Resource
[   231.906] Initializing built-in extension XVideo
[   231.906] Initializing built-in extension XVideo-MotionCompensation
[   231.906] Initializing built-in extension XFree86-VidModeExtension
[   231.906] Initializing built-in extension XFree86-DGA
[   231.906] Initializing built-in extension XFree86-DRI
[   231.906] Initializing built-in extension DRI2
[   231.906] (II) LoadModule: "glx"
[   231.965] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[   231.978] (II) Module glx: vendor="X.Org Foundation"
[   231.978] compiled for 1.13.3, module version = 1.0.0
[   231.978] ABI class: X.Org Server Extension, version 7.0
[   231.978] (==) AIGLX enabled
[   231.978] Loading extension GLX
[   231.979] (==) Matched intel as autoconfigured driver 0
[   231.979] (==) Matched vesa as autoconfigured driver 1
[   231.979] (==) Assigned the driver to the xf86ConfigLayout
[   231.979] (II) LoadModule: "intel"
[   231.979] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[   232.021] (II) Module intel: vendor="X.Org Foundation"
[   232.021] compiled for 1.13.3, module version = 2.21.4
[   232.021] Module class: X.Org Video Driver
[   232.021] ABI class: X.Org Video Driver, version 13.1
[   232.029] (II) LoadModule: "vesa"
[   232.030] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[   232.037] (II) Module vesa: vendor="X.Org Foundation"
[   232.037] compiled for 1.13.1, module version = 2.3.2
[   232.037] Module class: X.Org Video Driver
[   232.037] ABI class: X.Org Video Driver, version 13.1
[   232.037] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
        Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
        Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
        Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
        Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
        Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
        Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
        Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
        Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
        Haswell Server (GT2+), Haswell SDV Desktop (GT1),
        Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
        Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
        Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
        Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
        Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
        Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
        Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
        Haswell ULT Server (GT1), Haswell ULT Server (GT2),
        Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
        Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
        Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
        Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
        Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
        ValleyView PO board
[   232.038] (II) VESA: driver for VESA chipsets: vesa
[   232.051] (WW) Falling back to old probe method for vesa
[   232.052] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[   232.052] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   232.052] (==) intel(0): RGB weight 888
[   232.052] (==) intel(0): Default visual is TrueColor
[   232.052] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965G
[   232.053] (**) intel(0): Relaxed fencing disabled
[   232.053] (**) intel(0): Wait on SwapBuffers? enabled
[   232.053] (**) intel(0): Triple buffering? enabled
[   232.053] (**) intel(0): Framebuffer tiled
[   232.053] (**) intel(0): Pixmaps tiled
[   232.053] (**) intel(0): 3D buffers tiled
[   232.053] (**) intel(0): SwapBuffers wait enabled
[   232.053] (==) intel(0): video overlay key set to 0x101fe
[   232.077] (II) intel(0): Output VGA1 has no monitor section
[   232.119] (II) intel(0): Output DVI1 has no monitor section
[   232.166] (II) intel(0): EDID for output VGA1
[   232.166] (II) intel(0): Manufacturer: IVM  Model: 38a9  Serial#: 27
[   232.166] (II) intel(0): Year: 2008  Week: 51
[   232.167] (II) intel(0): EDID Version: 1.3
[   232.167] (II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[   232.167] (II) intel(0): Sync:  Separate
[   232.167] (II) intel(0): Max Image Size [cm]: horiz.: 30  vert.: 23
[   232.167] (II) intel(0): Gamma: 2.20
[   232.167] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[   232.167] (II) intel(0): First detailed timing is preferred mode
[   232.167] (II) intel(0): redX: 0.617 redY: 0.347   greenX: 0.290 greenY: 0.593
[   232.167] (II) intel(0): blueX: 0.148 blueY: 0.100   whiteX: 0.313 whiteY: 0.329
[   232.167] (II) intel(0): Supported established timings:
[   232.167] (II) intel(0): 720x400@70Hz
[   232.167] (II) intel(0): 640x480@60Hz
[   232.167] (II) intel(0): 640x480@67Hz
[   232.167] (II) intel(0): 640x480@72Hz
[   232.167] (II) intel(0): 640x480@75Hz
[   232.167] (II) intel(0): 800x600@56Hz
[   232.167] (II) intel(0): 800x600@60Hz
[   232.167] (II) intel(0): 800x600@72Hz
[   232.167] (II) intel(0): 800x600@75Hz
[   232.167] (II) intel(0): 832x624@75Hz
[   232.167] (II) intel(0): 1024x768@60Hz
[   232.167] (II) intel(0): 1024x768@70Hz
[   232.167] (II) intel(0): 1024x768@75Hz
[   232.167] (II) intel(0): Manufacturer's mask: 0
[   232.167] (II) intel(0): Supported standard timings:
[   232.167] (II) intel(0): #0: hsize: 1024  vsize 768  refresh: 60  vid: 16481
[   232.167] (II) intel(0): Supported detailed timing:
[   232.167] (II) intel(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
[   232.167] (II) intel(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
[   232.167] (II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
[   232.167] (II) intel(0): Ranges: V min: 55 V max: 76 Hz, H min: 30 H max: 63 kHz, PixClock max 95 MHz
[   232.167] (II) intel(0): Serial No: 1102485100027
[   232.167] (II) intel(0): Monitor name: PLT1530S
[   232.167] (II) intel(0): EDID (in hex):
[   232.167] (II) intel(0): 00ffffffffffff0026cda9381b000000
[   232.167] (II) intel(0): 33120103681e1778ea37259e584a9726
[   232.167] (II) intel(0): 195054bfee0061400101010101010101
[   232.167] (II) intel(0): 01010101010164190040410026301888
[   232.167] (II) intel(0): 360030e410000018000000fd00374c1e
[   232.167] (II) intel(0): 3f09000a202020202020000000ff0031
[   232.167] (II) intel(0): 313032343835313030303237000000fc
[   232.167] (II) intel(0): 00504c5431353330530a202020200027
[   232.168] (II) intel(0): Printing probed modes for output VGA1
[   232.168] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz eP)
[   232.168] (II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[   232.168] (II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   232.168] (II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   232.168] (II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   232.168] (II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   232.168] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   232.168] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   232.168] (II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz e)
[   232.168] (II) intel(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   232.168] (II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   232.168] (II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   232.207] (II) intel(0): EDID for output DVI1
[   232.208] (II) intel(0): Not using default mode "640x350" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "320x175" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "640x400" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "320x200" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "720x400" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "360x200" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "640x480" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "640x480" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "640x480" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "800x600" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "1024x768i" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "512x384i" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "1024x768" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "1152x864" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "1280x960" (hsync out of range)
[   232.208] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "1280x960" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "1280x1024" (hsync out of range)
[   232.208] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "1280x1024" (vrefresh out of range)
[   232.208] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "1600x1200" (hsync out of range)
[   232.208] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   232.208] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
[   232.209] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
[   232.209] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
[   232.209] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "1600x1200" (vrefresh out of range)
[   232.209] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "1792x1344" (hsync out of range)
[   232.209] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "1792x1344" (vrefresh out of range)
[   232.209] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "1856x1392" (hsync out of range)
[   232.209] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "1856x1392" (vrefresh out of range)
[   232.209] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "1920x1440" (hsync out of range)
[   232.209] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
[   232.209] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "832x624" (vrefresh out of range)
[   232.209] (II) intel(0): Not using default mode "416x312" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "1400x1050" (hsync out of range)
[   232.209] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "1400x1050" (vrefresh out of range)
[   232.209] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "1920x1440" (vrefresh out of range)
[   232.209] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "2048x1536" (hsync out of range)
[   232.209] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
[   232.209] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   232.209] (II) intel(0): Not using default mode "2048x1536" (vrefresh out of range)
[   232.209] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[   232.209] (II) intel(0): Printing probed modes for output DVI1
[   232.209] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[   232.209] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[   232.209] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[   232.209] (II) intel(0): Output VGA1 connected
[   232.209] (II) intel(0): Output DVI1 disconnected
[   232.209] (II) intel(0): Using exact sizes for initial modes
[   232.209] (II) intel(0): Output VGA1 using initial mode 1024x768
[   232.209] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   232.209] (II) intel(0): Kernel page flipping support detected, enabling
[   232.209] (==) intel(0): DPI set to (96, 96)
[   232.210] (II) Loading sub module "fb"
[   232.210] (II) LoadModule: "fb"
[   232.236] (II) Loading /usr/X11R6/lib/modules/libfb.so
[   232.247] (II) Module fb: vendor="X.Org Foundation"
[   232.247] compiled for 1.13.3, module version = 1.0.0
[   232.247] ABI class: X.Org ANSI C Emulation, version 0.4
[   232.247] (II) Loading sub module "dri2"
[   232.247] (II) LoadModule: "dri2"
[   232.247] (II) Module "dri2" already built-in
[   232.247] (II) UnloadModule: "vesa"
[   232.247] (II) Unloading vesa
[   232.247] (==) Depth 24 pixmap format is 32 bpp
[   232.263] (II) intel(0): [DRI2] Setup complete
[   232.263] (II) intel(0): [DRI2]   DRI driver: i965
[   232.263] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[   232.365] (II) UXA(0): Driver registered support for the following operations:
[   232.365] (II)         solid
[   232.365] (II)         copy
[   232.365] (II)         composite (RENDER acceleration)
[   232.365] (II)         put_image
[   232.365] (II)         get_image
[   232.365] (==) intel(0): Backing store disabled
[   232.365] (==) intel(0): Silken mouse disabled
[   232.365] (II) intel(0): Initializing HW Cursor
[   232.365] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   232.371] (==) intel(0): DPMS enabled
[   232.371] (==) intel(0): Intel XvMC decoder enabled
[   232.371] (II) intel(0): Set up textured video
[   232.379] (II) intel(0): [XvMC] i965_xvmc driver initialized.
[   232.379] (II) intel(0): direct rendering: DRI2 Enabled
[   232.393] (--) RandR disabled
[   232.674] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   232.674] (II) AIGLX: enabled GLX_INTEL_swap_event
[   232.674] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[   232.674] (II) AIGLX: enabled GLX_SGI_make_current_read
[   232.674] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   232.674] (II) AIGLX: Loaded and initialized i965
[   232.674] (II) GLX: Initialized DRI2 GL provider for screen 0
[   232.681] (II) intel(0): Setting screen physical size to 270 x 203
[   233.363] (II) config/wscons: checking input device /dev/wskbd
[   233.363] (II) wskbd: using layout us
[   233.363] (II) LoadModule: "kbd"
[   233.364] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[   233.378] (II) Module kbd: vendor="X.Org Foundation"
[   233.378] compiled for 1.13.1, module version = 1.6.2
[   233.378] Module class: X.Org XInput Driver
[   233.378] ABI class: X.Org XInput driver, version 18.0
[   233.378] (II) Using input driver 'kbd' for '/dev/wskbd'
[   233.378] (**) /dev/wskbd: always reports core events
[   233.378] (**) /dev/wskbd: always reports core events
[   233.378] (**) Option "Protocol" "standard"
[   233.378] (**) Option "XkbRules" "base"
[   233.378] (**) Option "XkbModel" "pc105"
[   233.378] (**) Option "XkbLayout" "us"
[   233.378] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[   233.440] (II) config/wscons: checking input device /dev/wsmouse0
[   233.440] (II) LoadModule: "ws"
[   233.442] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[   233.454] (II) Module ws: vendor="X.Org Foundation"
[   233.454] compiled for 1.13.1, module version = 1.3.0
[   233.454] Module class: X.Org XInput Driver
[   233.454] ABI class: X.Org XInput driver, version 18.0
[   233.454] (II) Using input driver 'ws' for '/dev/wsmouse0'
[   233.454] (**) /dev/wsmouse0: always reports core events
[   233.455] (II) ws: /dev/wsmouse0: debuglevel 0
[   233.455] (**) Option "Device" "/dev/wsmouse0"
[   233.455] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
[   233.455] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
[   233.455] (**) ws: /dev/wsmouse0: associated screen: 0
[   233.455] (**) ws: /dev/wsmouse0: device will work in raw mode
[   233.455] (II) ws: /dev/wsmouse0: minimum x position: 30
[   233.455] (II) ws: /dev/wsmouse0: maximum x position: 4040
[   233.455] (II) ws: /dev/wsmouse0: minimum y position: 60
[   233.455] (II) ws: /dev/wsmouse0: maximum y position: 4035
[   233.455] (==) ws: /dev/wsmouse0: Buttons: 7
[   233.491] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
[   233.491] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: TOUCHSCREEN, id 7)
[   233.491] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[   233.491] (**) /dev/wsmouse0: (accel) acceleration profile 0
[   233.491] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[   233.491] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[   233.492] (II) config/wscons: checking input device /dev/wsmouse
[   233.492] (II) Using input driver 'ws' for '/dev/wsmouse'
[   233.492] (**) /dev/wsmouse: always reports core events
[   233.492] (II) ws: /dev/wsmouse: debuglevel 0
[   233.492] (**) Option "Device" "/dev/wsmouse"
[   233.492] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[   233.492] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[   233.492] (**) ws: /dev/wsmouse: associated screen: 0
[   233.492] (II) ws: /dev/wsmouse: minimum x position: 0
[   233.492] (II) ws: /dev/wsmouse: maximum x position: 1023
[   233.492] (II) ws: /dev/wsmouse: minimum y position: 0
[   233.492] (II) ws: /dev/wsmouse: maximum y position: 767
[   233.492] (==) ws: /dev/wsmouse: Buttons: 7
[   233.492] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[   233.492] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 8)
[   233.492] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[   233.492] (**) /dev/wsmouse: (accel) acceleration profile 0
[   233.492] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[   233.492] (**) /dev/wsmouse: (accel) acceleration threshold: 4

--
Matthieu Herrb

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Mark Kettenis
> Date: Mon, 1 Apr 2013 10:09:27 +0200
> From: Matthieu Herrb <[hidden email]>
>
> On Sun, Mar 31, 2013 at 11:51:55AM +0200, Mark Kettenis wrote:
> > > Date: Fri, 29 Mar 2013 15:22:57 +0100
> >
> > Ralf, Matthieu,
> >
> > Yesterday I committed some changes that fix some issues in the SDVO
> > code.  For my setup, whhere HDMI output is provided over SDVO this
> > still isn't enough to give me output.  For that I need some further
> > changes.  But I'm interested to see if what's now in -current works
> > for you.  Could you send me a dmesg from a kernel with DRMDEBUG enabled?
> >
>
> Hi Mark,
>
>
> I've tried with intel_svdo.c 1.6 and the bitbang timing patch, my
> system still doesn't work. Below is dmesg with DRMDEBUG defined and
> Xorg.0.log.

To bad.  Perhaps the timings in the I2C bit-banging code need to be
adjusted a bit more.  Can you play with that a bit?

What I did was at the start of dev/i2c/i2c_bitbang.c, add something like

#undef delay
#define delay(x) DELAY((x) * 2)

Cheers,

Mark

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Matthieu Herrb
On Mon, Apr 01, 2013 at 12:24:39PM +0200, Mark Kettenis wrote:

> > Date: Mon, 1 Apr 2013 10:09:27 +0200
> > From: Matthieu Herrb <[hidden email]>
> >
> > On Sun, Mar 31, 2013 at 11:51:55AM +0200, Mark Kettenis wrote:
> > > > Date: Fri, 29 Mar 2013 15:22:57 +0100
> > >
> > > Ralf, Matthieu,
> > >
> > > Yesterday I committed some changes that fix some issues in the SDVO
> > > code.  For my setup, whhere HDMI output is provided over SDVO this
> > > still isn't enough to give me output.  For that I need some further
> > > changes.  But I'm interested to see if what's now in -current works
> > > for you.  Could you send me a dmesg from a kernel with DRMDEBUG enabled?
> > >
> >
> > Hi Mark,
> >
> >
> > I've tried with intel_svdo.c 1.6 and the bitbang timing patch, my
> > system still doesn't work. Below is dmesg with DRMDEBUG defined and
> > Xorg.0.log.
>
> To bad.  Perhaps the timings in the I2C bit-banging code need to be
> adjusted a bit more.  Can you play with that a bit?
>

Hi, yes adjusting timing a bit more makes my machine work. I first
doubled all values like you suggested, then tried to go back to
smaller values.

This seems to be the minimal set of value that makes my machine work:

Index: i2c_bitbang.c
===================================================================
RCS file: /cvs/OpenBSD/src/sys/dev/i2c/i2c_bitbang.c,v
retrieving revision 1.3
diff -u -p -u -r1.3 i2c_bitbang.c
--- i2c_bitbang.c 13 Jan 2006 23:56:46 -0000 1.3
+++ i2c_bitbang.c 6 Apr 2013 14:16:10 -0000
@@ -62,11 +62,11 @@ i2c_bitbang_send_start(void *v, int flag
  BB_DIR(OUTPUT);
 
  BB_SET(SDA | SCL);
- delay(5); /* bus free time (4.7 uS) */
+ delay(6); /* bus free time (4.7 uS) */
  BB_SET(      SCL);
- delay(4); /* start hold time (4.0 uS) */
+ delay(5); /* start hold time (4.0 uS) */
  BB_SET(        0);
- delay(5); /* clock low time (4.7 uS) */
+ delay(6); /* clock low time (4.7 uS) */
 
  return (0);
 }
@@ -79,7 +79,7 @@ i2c_bitbang_send_stop(void *v, int flags
  BB_DIR(OUTPUT);
 
  BB_SET(      SCL);
- delay(4); /* stop setup time (4.0 uS) */
+ delay(5); /* stop setup time (4.0 uS) */
  BB_SET(SDA | SCL);
 
  return (0);
@@ -115,11 +115,11 @@ i2c_bitbang_read_byte(void *v, uint8_t *
  for (i = 0; i < 8; i++) {
  val <<= 1;
  BB_SET(SDA | SCL);
- delay(4); /* clock high time (4.0 uS) */
+ delay(5); /* clock high time (4.0 uS) */
  if (BB_READ & SDA)
  val |= 1;
  BB_SET(SDA      );
- delay(5); /* clock low time (4.7 uS) */
+ delay(6); /* clock low time (4.7 uS) */
  }
 
  bit = (flags & I2C_F_LAST) ? SDA : 0;
@@ -127,13 +127,13 @@ i2c_bitbang_read_byte(void *v, uint8_t *
  BB_SET(bit      );
  delay(1); /* data setup time (250 nS) */
  BB_SET(bit | SCL);
- delay(4); /* clock high time (4.0 uS) */
+ delay(5); /* clock high time (4.0 uS) */
  BB_SET(bit      );
- delay(5); /* clock low time (4.7 uS) */
+ delay(6); /* clock low time (4.7 uS) */
 
  BB_DIR(INPUT);
  BB_SET(SDA      );
- delay(5);
+ delay(6);
 
  if ((flags & (I2C_F_STOP | I2C_F_LAST)) == (I2C_F_STOP | I2C_F_LAST))
  (void) i2c_bitbang_send_stop(v, flags, ops);
@@ -157,20 +157,20 @@ i2c_bitbang_write_byte(void *v, uint8_t
  BB_SET(bit      );
  delay(1); /* data setup time (250 nS) */
  BB_SET(bit | SCL);
- delay(4); /* clock high time (4.0 uS) */
+ delay(6); /* clock high time (4.0 uS) */
  BB_SET(bit      );
- delay(5); /* clock low time (4.7 uS) */
+ delay(8); /* clock low time (4.7 uS) */
  }
 
  BB_DIR(INPUT);
 
  BB_SET(SDA      );
- delay(5);
+ delay(6);
  BB_SET(SDA | SCL);
- delay(4);
+ delay(5);
  error = (BB_READ & SDA) ? EIO : 0;
  BB_SET(SDA      );
- delay(5);
+ delay(6);
 
  if (flags & I2C_F_STOP)
  (void) i2c_bitbang_send_stop(v, flags, ops);

--
Matthieu Herrb

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Guenther Niess-2
On 04/06/2013 04:19 PM, Matthieu Herrb wrote:

> On Mon, Apr 01, 2013 at 12:24:39PM +0200, Mark Kettenis wrote:
>>> Date: Mon, 1 Apr 2013 10:09:27 +0200
>>> From: Matthieu Herrb <[hidden email]>
>>>
>>> On Sun, Mar 31, 2013 at 11:51:55AM +0200, Mark Kettenis wrote:
>>>>> Date: Fri, 29 Mar 2013 15:22:57 +0100
>>>>
>>>> Ralf, Matthieu,
>>>>
>>>> Yesterday I committed some changes that fix some issues in the SDVO
>>>> code.  For my setup, whhere HDMI output is provided over SDVO this
>>>> still isn't enough to give me output.  For that I need some further
>>>> changes.  But I'm interested to see if what's now in -current works
>>>> for you.  Could you send me a dmesg from a kernel with DRMDEBUG enabled?
>>>>
>>>
>>> Hi Mark,
>>>
>>>
>>> I've tried with intel_svdo.c 1.6 and the bitbang timing patch, my
>>> system still doesn't work. Below is dmesg with DRMDEBUG defined and
>>> Xorg.0.log.
>>
>> To bad.  Perhaps the timings in the I2C bit-banging code need to be
>> adjusted a bit more.  Can you play with that a bit?
>>
>
> Hi, yes adjusting timing a bit more makes my machine work. I first
> doubled all values like you suggested, then tried to go back to
> smaller values.
>
> This seems to be the minimal set of value that makes my machine work:

This patch helps to get my Dell Workstation Display to work again,
thanks a lot. It's an Dell Optiplex-GX620. I've attached the dmesg and
Xorg.log.

Please let me know if I can help to verify this patch a little bit better.
OpenBSD 5.3-current (GENERIC.MP) #1: Sun Apr  7 21:38:13 CEST 2013
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2120769536 (2022MB)
avail mem = 2056667136 (1961MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0450 (73 entries)
bios0: vendor Dell Inc. version "A07" date 03/31/2006
bios0: Dell Inc. OptiPlex GX620
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC BOOT ASF! MCFG HPET SSDT SSDT SSDT
acpi0: wakeup devices VBTN(S4) PCI0(S5) PCI4(S5) PCI2(S5) PCI3(S5) PCI1(S5) PCI5(S5) PCI6(S5) MOU_(S3) USB0(S3) USB1(S3) USB2(S3) USB3(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz, 2993.02 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.00GHz, 2992.60 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,CNXT-ID,CX16,xTPR,PDCM,NXE,LONG,LAHF
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 3 (PCI4)
acpiprt1 at acpi0: bus 1 (PCI2)
acpiprt2 at acpi0: bus 2 (PCI3)
acpiprt3 at acpi0: bus -1 (PCI1)
acpiprt4 at acpi0: bus -1 (PCI5)
acpiprt5 at acpi0: bus -1 (PCI6)
acpiprt6 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
acpibtn0 at acpi0: VBTN
cpu0: Enhanced SpeedStep 2993 MHz: speeds: 3000, 2400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: apic 8 int 16
inteldrm0: Setting output timings on SDVOB failed
inteldrm0: Setting input timings on SDVOB failed
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945G Video" rev 0x02 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1 (0x4001): apic 8 int 16, address 00:13:72:a7:c7:21
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 21
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 23
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 3
auich0 at pci0 dev 30 function 2 "Intel 82801GB AC97" rev 0x01: apic 8 int 23, ICH7 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD+-RW GWA4164B, E111> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 8 int 20 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75MSA3>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 8 configuration 1 interface 0 "Kingston DT R500" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Kingston, DT R500, PMAP> SCSI0 0/direct removable serial.09511654BB9171150097
sd0: 61056MB, 512 bytes/sector, 125042688 sectors
uhidev0 at uhub1 port 1 configuration 1 interface 0 "LITEON Technology USB Multimedia Keyboard" rev 1.10/1.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 2 configuration 1 interface 0 "Microsoft Basic Optical Mouse" rev 1.10/0.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (c390adeb14ca03dc.a) swap on sd0b dump on sd0b

[demime 1.01d removed an attachment of type text/x-log which had a name of Xorg.0.log]

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Mark Kettenis
In reply to this post by Matthieu Herrb
> Date: Sat, 6 Apr 2013 16:19:02 +0200
> From: Matthieu Herrb <[hidden email]>
>
> On Mon, Apr 01, 2013 at 12:24:39PM +0200, Mark Kettenis wrote:
> > > Date: Mon, 1 Apr 2013 10:09:27 +0200
> > > From: Matthieu Herrb <[hidden email]>
> > >
> > > On Sun, Mar 31, 2013 at 11:51:55AM +0200, Mark Kettenis wrote:
> > > > > Date: Fri, 29 Mar 2013 15:22:57 +0100
> > > >
> > > > Ralf, Matthieu,
> > > >
> > > > Yesterday I committed some changes that fix some issues in the SDVO
> > > > code.  For my setup, whhere HDMI output is provided over SDVO this
> > > > still isn't enough to give me output.  For that I need some further
> > > > changes.  But I'm interested to see if what's now in -current works
> > > > for you.  Could you send me a dmesg from a kernel with DRMDEBUG enabled?
> > > >
> > >
> > > Hi Mark,
> > >
> > >
> > > I've tried with intel_svdo.c 1.6 and the bitbang timing patch, my
> > > system still doesn't work. Below is dmesg with DRMDEBUG defined and
> > > Xorg.0.log.
> >
> > To bad.  Perhaps the timings in the I2C bit-banging code need to be
> > adjusted a bit more.  Can you play with that a bit?
> >
>
> Hi, yes adjusting timing a bit more makes my machine work. I first
> doubled all values like you suggested, then tried to go back to
> smaller values.
>
> This seems to be the minimal set of value that makes my machine work:

Did some more digging, and realized that the i2c protocol has a
mechanism for slave devices to slow down the master.  Our current code
doesn't handle that, but here's a diff (mostly stolen from NetBSD)
that does.  Works for my SDVO setups.  Can you give this a go?


Index: pci/drm/i915/intel_display.c
===================================================================
RCS file: /cvs/src/sys/dev/pci/drm/i915/intel_display.c,v
retrieving revision 1.5
diff -u -p -r1.5 intel_display.c
--- pci/drm/i915/intel_display.c 17 Apr 2013 20:04:04 -0000 1.5
+++ pci/drm/i915/intel_display.c 18 Apr 2013 21:40:21 -0000
@@ -2598,8 +2598,8 @@ i9xx_update_plane(struct drm_crtc *crtc,
  intel_crtc->dspaddr_offset = linear_offset;
  }
 
- DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
-      obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
+// DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
+//      obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
  I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
  if (INTEL_INFO(dev)->gen >= 4) {
  I915_MODIFY_DISPBASE(DSPSURF(plane),
Index: i2c/i2c_bitbang.c
===================================================================
RCS file: /cvs/src/sys/dev/i2c/i2c_bitbang.c,v
retrieving revision 1.3
diff -u -p -r1.3 i2c_bitbang.c
--- i2c/i2c_bitbang.c 13 Jan 2006 23:56:46 -0000 1.3
+++ i2c/i2c_bitbang.c 18 Apr 2013 21:40:21 -0000
@@ -54,6 +54,27 @@
 #define OUTPUT ops->ibo_bits[I2C_BIT_OUTPUT] /* SDA is output */
 #define INPUT ops->ibo_bits[I2C_BIT_INPUT] /* SDA is input */
 
+#define SCL_BAIL_COUNT 1000
+
+int i2c_wait_for_scl(void *, i2c_bitbang_ops_t);
+
+int
+i2c_wait_for_scl(void *v, i2c_bitbang_ops_t ops)
+{
+ int bail = 0;
+
+ while(((BB_READ & SCL) == 0) && bail < SCL_BAIL_COUNT) {
+ delay(1);
+ bail++;
+ }
+ if (bail == SCL_BAIL_COUNT) {
+ i2c_bitbang_send_stop(v, 0, ops);
+ return (EIO);
+ }
+
+ return (0);
+}
+
 /*ARGSUSED*/
 int
 i2c_bitbang_send_start(void *v, int flags, i2c_bitbang_ops_t ops)
@@ -64,6 +85,8 @@ i2c_bitbang_send_start(void *v, int flag
  BB_SET(SDA | SCL);
  delay(5); /* bus free time (4.7 uS) */
  BB_SET(      SCL);
+ if (i2c_wait_for_scl(v, ops) != 0)
+ return (EIO);
  delay(4); /* start hold time (4.0 uS) */
  BB_SET(        0);
  delay(5); /* clock low time (4.7 uS) */
@@ -115,6 +138,8 @@ i2c_bitbang_read_byte(void *v, uint8_t *
  for (i = 0; i < 8; i++) {
  val <<= 1;
  BB_SET(SDA | SCL);
+ if (i2c_wait_for_scl(v, ops) != 0)
+ return (EIO);
  delay(4); /* clock high time (4.0 uS) */
  if (BB_READ & SDA)
  val |= 1;
@@ -127,6 +152,8 @@ i2c_bitbang_read_byte(void *v, uint8_t *
  BB_SET(bit      );
  delay(1); /* data setup time (250 nS) */
  BB_SET(bit | SCL);
+ if (i2c_wait_for_scl(v, ops) != 0)
+ return (EIO);
  delay(4); /* clock high time (4.0 uS) */
  BB_SET(bit      );
  delay(5); /* clock low time (4.7 uS) */
@@ -157,6 +184,8 @@ i2c_bitbang_write_byte(void *v, uint8_t
  BB_SET(bit      );
  delay(1); /* data setup time (250 nS) */
  BB_SET(bit | SCL);
+ if (i2c_wait_for_scl(v, ops) != 0)
+ return (EIO);
  delay(4); /* clock high time (4.0 uS) */
  BB_SET(bit      );
  delay(5); /* clock low time (4.7 uS) */
@@ -167,6 +196,8 @@ i2c_bitbang_write_byte(void *v, uint8_t
  BB_SET(SDA      );
  delay(5);
  BB_SET(SDA | SCL);
+ if (i2c_wait_for_scl(v, ops) != 0)
+ return (EIO);
  delay(4);
  error = (BB_READ & SDA) ? EIO : 0;
  BB_SET(SDA      );

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Matthieu Herrb
On Thu, Apr 18, 2013 at 11:45:32PM +0200, Mark Kettenis wrote:

> > Date: Sat, 6 Apr 2013 16:19:02 +0200
> > From: Matthieu Herrb <[hidden email]>
> >
> > On Mon, Apr 01, 2013 at 12:24:39PM +0200, Mark Kettenis wrote:
> > > > Date: Mon, 1 Apr 2013 10:09:27 +0200
> > > > From: Matthieu Herrb <[hidden email]>
> > > >
> > > > On Sun, Mar 31, 2013 at 11:51:55AM +0200, Mark Kettenis wrote:
> > > > > > Date: Fri, 29 Mar 2013 15:22:57 +0100
> > > > >
> > > > > Ralf, Matthieu,
> > > > >
> > > > > Yesterday I committed some changes that fix some issues in the SDVO
> > > > > code.  For my setup, whhere HDMI output is provided over SDVO this
> > > > > still isn't enough to give me output.  For that I need some further
> > > > > changes.  But I'm interested to see if what's now in -current works
> > > > > for you.  Could you send me a dmesg from a kernel with DRMDEBUG enabled?
> > > > >
> > > >
> > > > Hi Mark,
> > > >
> > > >
> > > > I've tried with intel_svdo.c 1.6 and the bitbang timing patch, my
> > > > system still doesn't work. Below is dmesg with DRMDEBUG defined and
> > > > Xorg.0.log.
> > >
> > > To bad.  Perhaps the timings in the I2C bit-banging code need to be
> > > adjusted a bit more.  Can you play with that a bit?
> > >
> >
> > Hi, yes adjusting timing a bit more makes my machine work. I first
> > doubled all values like you suggested, then tried to go back to
> > smaller values.
> >
> > This seems to be the minimal set of value that makes my machine work:
>
> Did some more digging, and realized that the i2c protocol has a
> mechanism for slave devices to slow down the master.  Our current code
> doesn't handle that, but here's a diff (mostly stolen from NetBSD)
> that does.  Works for my SDVO setups.  Can you give this a go?

Yes that patch work for me. Thanks.

>
>
> Index: pci/drm/i915/intel_display.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/pci/drm/i915/intel_display.c,v
> retrieving revision 1.5
> diff -u -p -r1.5 intel_display.c
> --- pci/drm/i915/intel_display.c 17 Apr 2013 20:04:04 -0000 1.5
> +++ pci/drm/i915/intel_display.c 18 Apr 2013 21:40:21 -0000
> @@ -2598,8 +2598,8 @@ i9xx_update_plane(struct drm_crtc *crtc,
>   intel_crtc->dspaddr_offset = linear_offset;
>   }
>  
> - DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
> -      obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
> +// DRM_DEBUG_KMS("Writing base %08X %08lX %d %d %d\n",
> +//      obj->gtt_offset, linear_offset, x, y, fb->pitches[0]);
>   I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]);
>   if (INTEL_INFO(dev)->gen >= 4) {
>   I915_MODIFY_DISPBASE(DSPSURF(plane),
> Index: i2c/i2c_bitbang.c
> ===================================================================
> RCS file: /cvs/src/sys/dev/i2c/i2c_bitbang.c,v
> retrieving revision 1.3
> diff -u -p -r1.3 i2c_bitbang.c
> --- i2c/i2c_bitbang.c 13 Jan 2006 23:56:46 -0000 1.3
> +++ i2c/i2c_bitbang.c 18 Apr 2013 21:40:21 -0000
> @@ -54,6 +54,27 @@
>  #define OUTPUT ops->ibo_bits[I2C_BIT_OUTPUT] /* SDA is output */
>  #define INPUT ops->ibo_bits[I2C_BIT_INPUT] /* SDA is input */
>  
> +#define SCL_BAIL_COUNT 1000
> +
> +int i2c_wait_for_scl(void *, i2c_bitbang_ops_t);
> +
> +int
> +i2c_wait_for_scl(void *v, i2c_bitbang_ops_t ops)
> +{
> + int bail = 0;
> +
> + while(((BB_READ & SCL) == 0) && bail < SCL_BAIL_COUNT) {
> + delay(1);
> + bail++;
> + }
> + if (bail == SCL_BAIL_COUNT) {
> + i2c_bitbang_send_stop(v, 0, ops);
> + return (EIO);
> + }
> +
> + return (0);
> +}
> +
>  /*ARGSUSED*/
>  int
>  i2c_bitbang_send_start(void *v, int flags, i2c_bitbang_ops_t ops)
> @@ -64,6 +85,8 @@ i2c_bitbang_send_start(void *v, int flag
>   BB_SET(SDA | SCL);
>   delay(5); /* bus free time (4.7 uS) */
>   BB_SET(      SCL);
> + if (i2c_wait_for_scl(v, ops) != 0)
> + return (EIO);
>   delay(4); /* start hold time (4.0 uS) */
>   BB_SET(        0);
>   delay(5); /* clock low time (4.7 uS) */
> @@ -115,6 +138,8 @@ i2c_bitbang_read_byte(void *v, uint8_t *
>   for (i = 0; i < 8; i++) {
>   val <<= 1;
>   BB_SET(SDA | SCL);
> + if (i2c_wait_for_scl(v, ops) != 0)
> + return (EIO);
>   delay(4); /* clock high time (4.0 uS) */
>   if (BB_READ & SDA)
>   val |= 1;
> @@ -127,6 +152,8 @@ i2c_bitbang_read_byte(void *v, uint8_t *
>   BB_SET(bit      );
>   delay(1); /* data setup time (250 nS) */
>   BB_SET(bit | SCL);
> + if (i2c_wait_for_scl(v, ops) != 0)
> + return (EIO);
>   delay(4); /* clock high time (4.0 uS) */
>   BB_SET(bit      );
>   delay(5); /* clock low time (4.7 uS) */
> @@ -157,6 +184,8 @@ i2c_bitbang_write_byte(void *v, uint8_t
>   BB_SET(bit      );
>   delay(1); /* data setup time (250 nS) */
>   BB_SET(bit | SCL);
> + if (i2c_wait_for_scl(v, ops) != 0)
> + return (EIO);
>   delay(4); /* clock high time (4.0 uS) */
>   BB_SET(bit      );
>   delay(5); /* clock low time (4.7 uS) */
> @@ -167,6 +196,8 @@ i2c_bitbang_write_byte(void *v, uint8_t
>   BB_SET(SDA      );
>   delay(5);
>   BB_SET(SDA | SCL);
> + if (i2c_wait_for_scl(v, ops) != 0)
> + return (EIO);
>   delay(4);
>   error = (BB_READ & SDA) ? EIO : 0;
>   BB_SET(SDA      );

Reply | Threaded
Open this post in threaded view
|

Re: DVI output not detected with kms

Guenther Niess-2
On 04/19/13 00:12, Matthieu Herrb wrote:

> On Thu, Apr 18, 2013 at 11:45:32PM +0200, Mark Kettenis wrote:
>> ...
>>>
>>> Hi, yes adjusting timing a bit more makes my machine work. I first
>>> doubled all values like you suggested, then tried to go back to
>>> smaller values.
>>>
>>> This seems to be the minimal set of value that makes my machine work:
>>
>> Did some more digging, and realized that the i2c protocol has a
>> mechanism for slave devices to slow down the master.  Our current code
>> doesn't handle that, but here's a diff (mostly stolen from NetBSD)
>> that does.  Works for my SDVO setups.  Can you give this a go?
>
> Yes that patch work for me. Thanks.

The patch also works for my dell workstation. Thanks