Browser is getting slower?

classic Classic list List threaded Threaded
12 messages Options
Reply | Threaded
Open this post in threaded view
|

Browser is getting slower?

George Pediaditis
Hello!
i have the impression that my browser is getting slower compared with
a fresh openbsd install.
Any ideas?


ps. Im using iridium

Reply | Threaded
Open this post in threaded view
|

Re: Browser is getting slower?

Mihai Popescu-3
> Hello!
> i have the impression that my browser is getting slower compared with
> a fresh openbsd install.
> Any ideas?

Global climate is getting warmer, too.

> ps. Im using iridium

What OpenBSD flavour is that?

Bye!

Reply | Threaded
Open this post in threaded view
|

Re: Browser is getting slower?

George Pediaditis
OpenBSD 6.0 stable

if i clean browser history etc  is getting better but i shouldnt have
to erase my history in order to open a new tab...

On Mon, Nov 21, 2016 at 9:48 AM, Mihai Popescu <[hidden email]> wrote:

>> Hello!
>> i have the impression that my browser is getting slower compared with
>> a fresh openbsd install.
>> Any ideas?
>
> Global climate is getting warmer, too.
>
>> ps. Im using iridium
>
> What OpenBSD flavour is that?
>
> Bye!

Reply | Threaded
Open this post in threaded view
|

Re: Browser is getting slower?

Erling Westenvik-2
In reply to this post by George Pediaditis
On Mon, Nov 21, 2016 at 08:13:05AM +0200, George Pediaditis wrote:
> Hello!
> i have the impression that my browser is getting slower compared with
> a fresh openbsd install.

You need to supply more information, like your dmesg(8), if someone is
going to be able to help you. Stating that you're having the
"impression" that Iridium is getting slower, isn't very precise.

> Any ideas?
> ps. Im using iridium

Have you tried other browsers?

--
Erling Westenvik

Reply | Threaded
Open this post in threaded view
|

Re: Browser is getting slower?

George Pediaditis
Ok you are right im sorry.
Im definitively sure that iridium(its like chromium) is getting slower
after a couple of weeks. Its so slow that im waiting 7+ sec to start.
Also cpu is high and everything on the browser is really slow.  The
problem is solved when i clean my history etc. Now it takes about 1-2
sec to start it.
I have tried Firefox before but its even worse.It crashes is slow and
cpu is high.

This is my dmesg.
OpenBSD 6.0-stable (GENERIC.MP) #0: Tue Nov  8 19:51:42 EET 2016
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 8474267648 (8081MB)
avail mem = 8212963328 (7832MB)
mpath0 at root
scsibus0 at mpath0: 256 targets

OpenBSD 6.0-stable (GENERIC.MP) #0: Tue Nov  8 19:51:42 EET 2016
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 8474267648 (8081MB)
avail mem = 8212963328 (7832MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe6dc0 (71 entries)
bios0: vendor LENOVO version "0XCN23WW" date 03/21/2016
bios0: LENOVO 80SR
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP TCPA UEFI UEFI SSDT SSDT TPM2 MSDM SSDT DBGP
DBG2 ASF! ASPT BOOT DBGP HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT DMAR
FPDT
acpi0: wakeup devices GLAN(S3) XHC_(S3) XDCI(S4) HDAS(S3) PXSX(S3)
RP01(S3) PXSX(S3) RP02(S3) PXSX(S3) RP03(S3) PXSX(S3) RP04(S3)
PXSX(S3) RP05(S3) PXSX(S3) RP06(S3) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2395.19 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 1 (RP05)
acpiprt6 at acpi0: bus 2 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus -1 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus -1 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpibat0 at acpi0: BAT0 model "L15M2PB5" serial  4971 type LiP oem "SMP"
"VPC2004" at acpi0 not configured
"INT3F0D" at acpi0 not configured
"MSFT0001" at acpi0 not configured
"SYN2B59" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
"PNP0C14" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"INT340E" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 2395 MHz: speeds: 2501, 2500, 2400, 2300,
2100, 2000, 1800, 1700, 1500, 1300, 1200, 1000, 800, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi,
AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZYLN256, EMT6> SCSI3
0/direct fixed naa.5002538d00000000
sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GUE0N, T.02> ATAPI
5/cdrom removable
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
(0x5080), msi, address 50:7b:9d:f4:e3:3c
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x99,
msi
pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
azalia0: codecs: Conexant/0x510f, Intel/0x2809, using Conexant/0x510f
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
apic 2 int 16
iic0 at ichiic0
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Synaptics touchpad, firmware 8.1
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Microsoft USB
Optical Mouse" rev 2.00/2.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse1 at ums0 mux 0
uvideo0 at uhub0 port 4 configuration 1 interface 0 "K3BG6I41V
EasyCamera" rev 2.00/0.06 addr 3
video0 at uvideo0
ugen0 at uhub0 port 5 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4
ugen1 at uhub0 port 7 "Intel product 0x0a2a" rev 2.00/0.01 addr 5
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 244190MB, 512 bytes/sector, 500102858 sectors
root on sd1a (e858fdf181925872.a) swap on sd1b dump on sd1b
iwm0: hw rev 0x210, fw ver 16.242414.0, address b8:81:98:61:f6:61

Reply | Threaded
Open this post in threaded view
|

Re: Browser is getting slower?

Gregory Edigarov-5
On 21.11.16 15:56, George Pediaditis wrote:
> Ok you are right im sorry.
> Im definitively sure that iridium(its like chromium) is getting slower
> after a couple of weeks. Its so slow that im waiting 7+ sec to start.
> Also cpu is high and everything on the browser is really slow.  The
> problem is solved when i clean my history etc. Now it takes about 1-2
> sec to start it.
> I have tried Firefox before but its even worse.It crashes is slow and
> cpu is high.
which extensions are installed in iridium?
is iridium always running, or you load it every time?

> This is my dmesg.
> OpenBSD 6.0-stable (GENERIC.MP) #0: Tue Nov  8 19:51:42 EET 2016
>      [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> RTC BIOS diagnostic error 80<clock_battery>
> real mem = 8474267648 (8081MB)
> avail mem = 8212963328 (7832MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
>
> OpenBSD 6.0-stable (GENERIC.MP) #0: Tue Nov  8 19:51:42 EET 2016
>      [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> RTC BIOS diagnostic error 80<clock_battery>
> real mem = 8474267648 (8081MB)
> avail mem = 8212963328 (7832MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe6dc0 (71 entries)
> bios0: vendor LENOVO version "0XCN23WW" date 03/21/2016
> bios0: LENOVO 80SR
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP TCPA UEFI UEFI SSDT SSDT TPM2 MSDM SSDT DBGP
> DBG2 ASF! ASPT BOOT DBGP HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT DMAR
> FPDT
> acpi0: wakeup devices GLAN(S3) XHC_(S3) XDCI(S4) HDAS(S3) PXSX(S3)
> RP01(S3) PXSX(S3) RP02(S3) PXSX(S3) RP03(S3) PXSX(S3) RP04(S3)
> PXSX(S3) RP05(S3) PXSX(S3) RP06(S3) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 23999999 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2395.19 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
> ,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 23MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
> ,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 1 (application processor)
> cpu2: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
> ,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 1, core 0, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
> ,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (RP01)
> acpiprt2 at acpi0: bus -1 (RP02)
> acpiprt3 at acpi0: bus -1 (RP03)
> acpiprt4 at acpi0: bus -1 (RP04)
> acpiprt5 at acpi0: bus 1 (RP05)
> acpiprt6 at acpi0: bus 2 (RP06)
> acpiprt7 at acpi0: bus -1 (RP07)
> acpiprt8 at acpi0: bus -1 (RP08)
> acpiprt9 at acpi0: bus -1 (RP09)
> acpiprt10 at acpi0: bus -1 (RP10)
> acpiprt11 at acpi0: bus -1 (RP11)
> acpiprt12 at acpi0: bus -1 (RP12)
> acpiprt13 at acpi0: bus -1 (RP13)
> acpiprt14 at acpi0: bus -1 (RP14)
> acpiprt15 at acpi0: bus -1 (RP15)
> acpiprt16 at acpi0: bus -1 (RP16)
> acpiprt17 at acpi0: bus -1 (RP17)
> acpiprt18 at acpi0: bus -1 (RP18)
> acpiprt19 at acpi0: bus -1 (RP19)
> acpiprt20 at acpi0: bus -1 (RP20)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpibat0 at acpi0: BAT0 model "L15M2PB5" serial  4971 type LiP oem "SMP"
> "VPC2004" at acpi0 not configured
> "INT3F0D" at acpi0 not configured
> "MSFT0001" at acpi0 not configured
> "SYN2B59" at acpi0 not configured
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: LID0
> acpibtn1 at acpi0: PWRB
> "PNP0C14" at acpi0 not configured
> "MSFT0101" at acpi0 not configured
> "INT340E" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> cpu0: Enhanced SpeedStep 2395 MHz: speeds: 2501, 2500, 2400, 2300,
> 2100, 2000, 1800, 1700, 1500, 1300, 1200, 1000, 800, 700, 600, 400 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
> "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi,
> AHCI 1.3.1
> ahci0: port 0: 6.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZYLN256, EMT6> SCSI3
> 0/direct fixed naa.5002538d00000000
> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GUE0N, T.02> ATAPI
> 5/cdrom removable
> ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
> pci1 at ppb0 bus 1
> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
> (0x5080), msi, address 50:7b:9d:f4:e3:3c
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> ppb1 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
> pci2 at ppb1 bus 2
> iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x99,
> msi
> pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
> "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
> azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21: msi
> azalia0: codecs: Conexant/0x510f, Intel/0x2809, using Conexant/0x510f
> audio0 at azalia0
> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
> apic 2 int 16
> iic0 at ichiic0
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pms0: Synaptics touchpad, firmware 8.1
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> uhidev0 at uhub0 port 2 configuration 1 interface 0 "Microsoft USB
> Optical Mouse" rev 2.00/2.00 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uvideo0 at uhub0 port 4 configuration 1 interface 0 "K3BG6I41V
> EasyCamera" rev 2.00/0.06 addr 3
> video0 at uvideo0
> ugen0 at uhub0 port 5 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4
> ugen1 at uhub0 port 7 "Intel product 0x0a2a" rev 2.00/0.01 addr 5
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> sd1: 244190MB, 512 bytes/sector, 500102858 sectors
> root on sd1a (e858fdf181925872.a) swap on sd1b dump on sd1b
> iwm0: hw rev 0x210, fw ver 16.242414.0, address b8:81:98:61:f6:61

Reply | Threaded
Open this post in threaded view
|

Re: Browser is getting slower?

George Pediaditis
I have installed https everywhere,  bookmarks tagging and signal
private messenger.
I have openbsd on my laptop so iridium isnt running all the time.

On Mon, Nov 21, 2016 at 5:35 PM, Gregory Edigarov <[hidden email]> wrote:

> On 21.11.16 15:56, George Pediaditis wrote:
>>
>> Ok you are right im sorry.
>> Im definitively sure that iridium(its like chromium) is getting slower
>> after a couple of weeks. Its so slow that im waiting 7+ sec to start.
>> Also cpu is high and everything on the browser is really slow.  The
>> problem is solved when i clean my history etc. Now it takes about 1-2
>> sec to start it.
>> I have tried Firefox before but its even worse.It crashes is slow and
>> cpu is high.
>
> which extensions are installed in iridium?
> is iridium always running, or you load it every time?
>
>> This is my dmesg.
>> OpenBSD 6.0-stable (GENERIC.MP) #0: Tue Nov  8 19:51:42 EET 2016
>>      [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> RTC BIOS diagnostic error 80<clock_battery>
>> real mem = 8474267648 (8081MB)
>> avail mem = 8212963328 (7832MB)
>> mpath0 at root
>> scsibus0 at mpath0: 256 targets
>>
>> OpenBSD 6.0-stable (GENERIC.MP) #0: Tue Nov  8 19:51:42 EET 2016
>>      [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>> RTC BIOS diagnostic error 80<clock_battery>
>> real mem = 8474267648 (8081MB)
>> avail mem = 8212963328 (7832MB)
>> mpath0 at root
>> scsibus0 at mpath0: 256 targets
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe6dc0 (71 entries)
>> bios0: vendor LENOVO version "0XCN23WW" date 03/21/2016
>> bios0: LENOVO 80SR
>> acpi0 at bios0: rev 2
>> acpi0: sleep states S0 S3 S4 S5
>> acpi0: tables DSDT FACP TCPA UEFI UEFI SSDT SSDT TPM2 MSDM SSDT DBGP
>> DBG2 ASF! ASPT BOOT DBGP HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT DMAR
>> FPDT
>> acpi0: wakeup devices GLAN(S3) XHC_(S3) XDCI(S4) HDAS(S3) PXSX(S3)
>> RP01(S3) PXSX(S3) RP02(S3) PXSX(S3) RP03(S3) PXSX(S3) RP04(S3)
>> PXSX(S3) RP05(S3) PXSX(S3) RP06(S3) [...]
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpihpet0 at acpi0: 23999999 Hz
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2395.19 MHz
>> cpu0:
>>
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>>
>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
>>
>> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
>>
>> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
>>
>> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
>> ,SENSOR,ARAT
>> cpu0: 256KB 64b/line 8-way L2 cache
>> cpu0: smt 0, core 0, package 0
>> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
>> cpu0: apic clock running at 23MHz
>> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
>> cpu1 at mainbus0: apid 2 (application processor)
>> cpu1: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
>> cpu1:
>>
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>>
>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
>>
>> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
>>
>> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
>>
>> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
>> ,SENSOR,ARAT
>> cpu1: 256KB 64b/line 8-way L2 cache
>> cpu1: smt 0, core 1, package 0
>> cpu2 at mainbus0: apid 1 (application processor)
>> cpu2: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
>> cpu2:
>>
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>>
>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
>>
>> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
>>
>> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
>>
>> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
>> ,SENSOR,ARAT
>> cpu2: 256KB 64b/line 8-way L2 cache
>> cpu2: smt 1, core 0, package 0
>> cpu3 at mainbus0: apid 3 (application processor)
>> cpu3: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
>> cpu3:
>>
>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>>
>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
>>
>> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
>>
>> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
>>
>> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
>> ,SENSOR,ARAT
>> cpu3: 256KB 64b/line 8-way L2 cache
>> cpu3: smt 1, core 1, package 0
>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
>> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpiprt1 at acpi0: bus -1 (RP01)
>> acpiprt2 at acpi0: bus -1 (RP02)
>> acpiprt3 at acpi0: bus -1 (RP03)
>> acpiprt4 at acpi0: bus -1 (RP04)
>> acpiprt5 at acpi0: bus 1 (RP05)
>> acpiprt6 at acpi0: bus 2 (RP06)
>> acpiprt7 at acpi0: bus -1 (RP07)
>> acpiprt8 at acpi0: bus -1 (RP08)
>> acpiprt9 at acpi0: bus -1 (RP09)
>> acpiprt10 at acpi0: bus -1 (RP10)
>> acpiprt11 at acpi0: bus -1 (RP11)
>> acpiprt12 at acpi0: bus -1 (RP12)
>> acpiprt13 at acpi0: bus -1 (RP13)
>> acpiprt14 at acpi0: bus -1 (RP14)
>> acpiprt15 at acpi0: bus -1 (RP15)
>> acpiprt16 at acpi0: bus -1 (RP16)
>> acpiprt17 at acpi0: bus -1 (RP17)
>> acpiprt18 at acpi0: bus -1 (RP18)
>> acpiprt19 at acpi0: bus -1 (RP19)
>> acpiprt20 at acpi0: bus -1 (RP20)
>> acpiec0 at acpi0
>> acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>> acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>> acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>> acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>> acpibat0 at acpi0: BAT0 model "L15M2PB5" serial  4971 type LiP oem "SMP"
>> "VPC2004" at acpi0 not configured
>> "INT3F0D" at acpi0 not configured
>> "MSFT0001" at acpi0 not configured
>> "SYN2B59" at acpi0 not configured
>> acpiac0 at acpi0: AC unit online
>> acpibtn0 at acpi0: LID0
>> acpibtn1 at acpi0: PWRB
>> "PNP0C14" at acpi0 not configured
>> "MSFT0101" at acpi0 not configured
>> "INT340E" at acpi0 not configured
>> acpivideo0 at acpi0: GFX0
>> acpivout0 at acpivideo0: DD1F
>> cpu0: Enhanced SpeedStep 2395 MHz: speeds: 2501, 2500, 2400, 2300,
>> 2100, 2000, 1800, 1700, 1500, 1300, 1200, 1000, 800, 700, 600, 400 MHz
>> pci0 at mainbus0 bus 0
>> pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
>> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
>> usb0 at xhci0: USB revision 3.0
>> uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
>> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
>> "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
>> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi,
>> AHCI 1.3.1
>> ahci0: port 0: 6.0Gb/s
>> ahci0: port 1: 1.5Gb/s
>> scsibus1 at ahci0: 32 targets
>> sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZYLN256, EMT6> SCSI3
>> 0/direct fixed naa.5002538d00000000
>> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
>> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GUE0N, T.02> ATAPI
>> 5/cdrom removable
>> ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
>> pci1 at ppb0 bus 1
>> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
>> (0x5080), msi, address 50:7b:9d:f4:e3:3c
>> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
>> ppb1 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
>> pci2 at ppb1 bus 2
>> iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x99,
>> msi
>> pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
>> "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
>> azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21:
>> msi
>> azalia0: codecs: Conexant/0x510f, Intel/0x2809, using Conexant/0x510f
>> audio0 at azalia0
>> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
>> apic 2 int 16
>> iic0 at ichiic0
>> isa0 at pcib0
>> isadma0 at isa0
>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>> pckbd0 at pckbc0 (kbd slot)
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pms0 at pckbc0 (aux slot)
>> wsmouse0 at pms0 mux 0
>> pms0: Synaptics touchpad, firmware 8.1
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> uhidev0 at uhub0 port 2 configuration 1 interface 0 "Microsoft USB
>> Optical Mouse" rev 2.00/2.00 addr 2
>> uhidev0: iclass 3/1
>> ums0 at uhidev0: 3 buttons, Z dir
>> wsmouse1 at ums0 mux 0
>> uvideo0 at uhub0 port 4 configuration 1 interface 0 "K3BG6I41V
>> EasyCamera" rev 2.00/0.06 addr 3
>> video0 at uvideo0
>> ugen0 at uhub0 port 5 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4
>> ugen1 at uhub0 port 7 "Intel product 0x0a2a" rev 2.00/0.01 addr 5
>> vscsi0 at root
>> scsibus2 at vscsi0: 256 targets
>> softraid0 at root
>> scsibus3 at softraid0: 256 targets
>> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct
>> fixed
>> sd1: 244190MB, 512 bytes/sector, 500102858 sectors
>> root on sd1a (e858fdf181925872.a) swap on sd1b dump on sd1b
>> iwm0: hw rev 0x210, fw ver 16.242414.0, address b8:81:98:61:f6:61

Reply | Threaded
Open this post in threaded view
|

Re: Browser is getting slower?

ludovic coues
What do you means by etc ?
Have you checked if the same issue happen with chromium or with
iridium on a different OS ?

2016-11-21 20:35 GMT+01:00 George Pediaditis <[hidden email]>:

> I have installed https everywhere,  bookmarks tagging and signal
> private messenger.
> I have openbsd on my laptop so iridium isnt running all the time.
>
> On Mon, Nov 21, 2016 at 5:35 PM, Gregory Edigarov <[hidden email]> wrote:
>> On 21.11.16 15:56, George Pediaditis wrote:
>>>
>>> Ok you are right im sorry.
>>> Im definitively sure that iridium(its like chromium) is getting slower
>>> after a couple of weeks. Its so slow that im waiting 7+ sec to start.
>>> Also cpu is high and everything on the browser is really slow.  The
>>> problem is solved when i clean my history etc. Now it takes about 1-2
>>> sec to start it.
>>> I have tried Firefox before but its even worse.It crashes is slow and
>>> cpu is high.
>>
>> which extensions are installed in iridium?
>> is iridium always running, or you load it every time?
>>
>>> This is my dmesg.
>>> OpenBSD 6.0-stable (GENERIC.MP) #0: Tue Nov  8 19:51:42 EET 2016
>>>      [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>>> RTC BIOS diagnostic error 80<clock_battery>
>>> real mem = 8474267648 (8081MB)
>>> avail mem = 8212963328 (7832MB)
>>> mpath0 at root
>>> scsibus0 at mpath0: 256 targets
>>>
>>> OpenBSD 6.0-stable (GENERIC.MP) #0: Tue Nov  8 19:51:42 EET 2016
>>>      [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>>> RTC BIOS diagnostic error 80<clock_battery>
>>> real mem = 8474267648 (8081MB)
>>> avail mem = 8212963328 (7832MB)
>>> mpath0 at root
>>> scsibus0 at mpath0: 256 targets
>>> mainbus0 at root
>>> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe6dc0 (71 entries)
>>> bios0: vendor LENOVO version "0XCN23WW" date 03/21/2016
>>> bios0: LENOVO 80SR
>>> acpi0 at bios0: rev 2
>>> acpi0: sleep states S0 S3 S4 S5
>>> acpi0: tables DSDT FACP TCPA UEFI UEFI SSDT SSDT TPM2 MSDM SSDT DBGP
>>> DBG2 ASF! ASPT BOOT DBGP HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT DMAR
>>> FPDT
>>> acpi0: wakeup devices GLAN(S3) XHC_(S3) XDCI(S4) HDAS(S3) PXSX(S3)
>>> RP01(S3) PXSX(S3) RP02(S3) PXSX(S3) RP03(S3) PXSX(S3) RP04(S3)
>>> PXSX(S3) RP05(S3) PXSX(S3) RP06(S3) [...]
>>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>>> acpihpet0 at acpi0: 23999999 Hz
>>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>>> cpu0 at mainbus0: apid 0 (boot processor)
>>> cpu0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2395.19 MHz
>>> cpu0:
>>>
>>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>>>
>>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
>>>
>>> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
>>>
>>> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
>>>
>>> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
>>> ,SENSOR,ARAT
>>> cpu0: 256KB 64b/line 8-way L2 cache
>>> cpu0: smt 0, core 0, package 0
>>> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
>>> cpu0: apic clock running at 23MHz
>>> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
>>> cpu1 at mainbus0: apid 2 (application processor)
>>> cpu1: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
>>> cpu1:
>>>
>>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>>>
>>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
>>>
>>> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
>>>
>>> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
>>>
>>> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
>>> ,SENSOR,ARAT
>>> cpu1: 256KB 64b/line 8-way L2 cache
>>> cpu1: smt 0, core 1, package 0
>>> cpu2 at mainbus0: apid 1 (application processor)
>>> cpu2: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
>>> cpu2:
>>>
>>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>>>
>>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
>>>
>>> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
>>>
>>> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
>>>
>>> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
>>> ,SENSOR,ARAT
>>> cpu2: 256KB 64b/line 8-way L2 cache
>>> cpu2: smt 1, core 0, package 0
>>> cpu3 at mainbus0: apid 3 (application processor)
>>> cpu3: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
>>> cpu3:
>>>
>>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>>>
>>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
>>>
>>> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
>>>
>>> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
>>>
>>> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
>>> ,SENSOR,ARAT
>>> cpu3: 256KB 64b/line 8-way L2 cache
>>> cpu3: smt 1, core 1, package 0
>>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
>>> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
>>> acpiprt0 at acpi0: bus 0 (PCI0)
>>> acpiprt1 at acpi0: bus -1 (RP01)
>>> acpiprt2 at acpi0: bus -1 (RP02)
>>> acpiprt3 at acpi0: bus -1 (RP03)
>>> acpiprt4 at acpi0: bus -1 (RP04)
>>> acpiprt5 at acpi0: bus 1 (RP05)
>>> acpiprt6 at acpi0: bus 2 (RP06)
>>> acpiprt7 at acpi0: bus -1 (RP07)
>>> acpiprt8 at acpi0: bus -1 (RP08)
>>> acpiprt9 at acpi0: bus -1 (RP09)
>>> acpiprt10 at acpi0: bus -1 (RP10)
>>> acpiprt11 at acpi0: bus -1 (RP11)
>>> acpiprt12 at acpi0: bus -1 (RP12)
>>> acpiprt13 at acpi0: bus -1 (RP13)
>>> acpiprt14 at acpi0: bus -1 (RP14)
>>> acpiprt15 at acpi0: bus -1 (RP15)
>>> acpiprt16 at acpi0: bus -1 (RP16)
>>> acpiprt17 at acpi0: bus -1 (RP17)
>>> acpiprt18 at acpi0: bus -1 (RP18)
>>> acpiprt19 at acpi0: bus -1 (RP19)
>>> acpiprt20 at acpi0: bus -1 (RP20)
>>> acpiec0 at acpi0
>>> acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>>> acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>>> acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>>> acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>>> acpibat0 at acpi0: BAT0 model "L15M2PB5" serial  4971 type LiP oem "SMP"
>>> "VPC2004" at acpi0 not configured
>>> "INT3F0D" at acpi0 not configured
>>> "MSFT0001" at acpi0 not configured
>>> "SYN2B59" at acpi0 not configured
>>> acpiac0 at acpi0: AC unit online
>>> acpibtn0 at acpi0: LID0
>>> acpibtn1 at acpi0: PWRB
>>> "PNP0C14" at acpi0 not configured
>>> "MSFT0101" at acpi0 not configured
>>> "INT340E" at acpi0 not configured
>>> acpivideo0 at acpi0: GFX0
>>> acpivout0 at acpivideo0: DD1F
>>> cpu0: Enhanced SpeedStep 2395 MHz: speeds: 2501, 2500, 2400, 2300,
>>> 2100, 2000, 1800, 1700, 1500, 1300, 1200, 1000, 800, 700, 600, 400 MHz
>>> pci0 at mainbus0 bus 0
>>> pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
>>> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
>>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>>> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
>>> usb0 at xhci0: USB revision 3.0
>>> uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
>>> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
>>> "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
>>> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi,
>>> AHCI 1.3.1
>>> ahci0: port 0: 6.0Gb/s
>>> ahci0: port 1: 1.5Gb/s
>>> scsibus1 at ahci0: 32 targets
>>> sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZYLN256, EMT6> SCSI3
>>> 0/direct fixed naa.5002538d00000000
>>> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
>>> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GUE0N, T.02> ATAPI
>>> 5/cdrom removable
>>> ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
>>> pci1 at ppb0 bus 1
>>> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
>>> (0x5080), msi, address 50:7b:9d:f4:e3:3c
>>> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
>>> ppb1 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
>>> pci2 at ppb1 bus 2
>>> iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x99,
>>> msi
>>> pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
>>> "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
>>> azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21:
>>> msi
>>> azalia0: codecs: Conexant/0x510f, Intel/0x2809, using Conexant/0x510f
>>> audio0 at azalia0
>>> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
>>> apic 2 int 16
>>> iic0 at ichiic0
>>> isa0 at pcib0
>>> isadma0 at isa0
>>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>>> pckbd0 at pckbc0 (kbd slot)
>>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>>> pms0 at pckbc0 (aux slot)
>>> wsmouse0 at pms0 mux 0
>>> pms0: Synaptics touchpad, firmware 8.1
>>> pcppi0 at isa0 port 0x61
>>> spkr0 at pcppi0
>>> uhidev0 at uhub0 port 2 configuration 1 interface 0 "Microsoft USB
>>> Optical Mouse" rev 2.00/2.00 addr 2
>>> uhidev0: iclass 3/1
>>> ums0 at uhidev0: 3 buttons, Z dir
>>> wsmouse1 at ums0 mux 0
>>> uvideo0 at uhub0 port 4 configuration 1 interface 0 "K3BG6I41V
>>> EasyCamera" rev 2.00/0.06 addr 3
>>> video0 at uvideo0
>>> ugen0 at uhub0 port 5 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4
>>> ugen1 at uhub0 port 7 "Intel product 0x0a2a" rev 2.00/0.01 addr 5
>>> vscsi0 at root
>>> scsibus2 at vscsi0: 256 targets
>>> softraid0 at root
>>> scsibus3 at softraid0: 256 targets
>>> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct
>>> fixed
>>> sd1: 244190MB, 512 bytes/sector, 500102858 sectors
>>> root on sd1a (e858fdf181925872.a) swap on sd1b dump on sd1b
>>> iwm0: hw rev 0x210, fw ver 16.242414.0, address b8:81:98:61:f6:61
>



--

Cordialement, Coues Ludovic
+336 148 743 42

Reply | Threaded
Open this post in threaded view
|

Re: Browser is getting slower?

alan01346
In reply to this post by George Pediaditis
I don't use Chromium (don't tell me I don't need a menu) but in
Firefox the user profile gets clogged up with cruft about once a year.
A quick test is to just make a new profile and see if it's faster.
Then copy over your bookmarks and gradually reestablish your cookies
which keep you logged into sites between sessions by manually logging
into each one.

You can get to Firefox's profile manager with
firefox -ProfileManager
at a command line.  It's probably in the GUI somewhere.  I use
Chromium about once a year, don't know much about it.

--
Credit is the root of all evil.  - AB1JX

Reply | Threaded
Open this post in threaded view
|

Re: Browser is getting slower?

George Pediaditis
In reply to this post by ludovic coues
When im saying etc i mean browsing history, download history, cookies,
cache images and files, passwords, autofill form data, and hosted app
data. I have installed debian on a usb stick and i can say that
chromium, iridium and firefox open almost instantly.

Maybe its a combination of problems.
I noticed recently is that i have lower cpu usage if i run iridium as
root. its not a big difference (15% lower). Im thinking that maybe the
problem lies on limits i have as a simple user.
Beside that i have a skylake cpu so i dont have gpu support.
I also think that maybe openbsd scheduler has some responsibility for
the  unresponsiveness.

On Tue, Nov 22, 2016 at 12:41 PM, ludovic coues <[hidden email]> wrote:

> What do you means by etc ?
> Have you checked if the same issue happen with chromium or with
> iridium on a different OS ?
>
> 2016-11-21 20:35 GMT+01:00 George Pediaditis <[hidden email]>:
>> I have installed https everywhere,  bookmarks tagging and signal
>> private messenger.
>> I have openbsd on my laptop so iridium isnt running all the time.
>>
>> On Mon, Nov 21, 2016 at 5:35 PM, Gregory Edigarov <[hidden email]> wrote:
>>> On 21.11.16 15:56, George Pediaditis wrote:
>>>>
>>>> Ok you are right im sorry.
>>>> Im definitively sure that iridium(its like chromium) is getting slower
>>>> after a couple of weeks. Its so slow that im waiting 7+ sec to start.
>>>> Also cpu is high and everything on the browser is really slow.  The
>>>> problem is solved when i clean my history etc. Now it takes about 1-2
>>>> sec to start it.
>>>> I have tried Firefox before but its even worse.It crashes is slow and
>>>> cpu is high.
>>>
>>> which extensions are installed in iridium?
>>> is iridium always running, or you load it every time?
>>>
>>>> This is my dmesg.
>>>> OpenBSD 6.0-stable (GENERIC.MP) #0: Tue Nov  8 19:51:42 EET 2016
>>>>      [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>>>> RTC BIOS diagnostic error 80<clock_battery>
>>>> real mem = 8474267648 (8081MB)
>>>> avail mem = 8212963328 (7832MB)
>>>> mpath0 at root
>>>> scsibus0 at mpath0: 256 targets
>>>>
>>>> OpenBSD 6.0-stable (GENERIC.MP) #0: Tue Nov  8 19:51:42 EET 2016
>>>>      [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>>>> RTC BIOS diagnostic error 80<clock_battery>
>>>> real mem = 8474267648 (8081MB)
>>>> avail mem = 8212963328 (7832MB)
>>>> mpath0 at root
>>>> scsibus0 at mpath0: 256 targets
>>>> mainbus0 at root
>>>> bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xe6dc0 (71 entries)
>>>> bios0: vendor LENOVO version "0XCN23WW" date 03/21/2016
>>>> bios0: LENOVO 80SR
>>>> acpi0 at bios0: rev 2
>>>> acpi0: sleep states S0 S3 S4 S5
>>>> acpi0: tables DSDT FACP TCPA UEFI UEFI SSDT SSDT TPM2 MSDM SSDT DBGP
>>>> DBG2 ASF! ASPT BOOT DBGP HPET LPIT APIC MCFG SSDT SSDT SSDT SSDT DMAR
>>>> FPDT
>>>> acpi0: wakeup devices GLAN(S3) XHC_(S3) XDCI(S4) HDAS(S3) PXSX(S3)
>>>> RP01(S3) PXSX(S3) RP02(S3) PXSX(S3) RP03(S3) PXSX(S3) RP04(S3)
>>>> PXSX(S3) RP05(S3) PXSX(S3) RP06(S3) [...]
>>>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>>>> acpihpet0 at acpi0: 23999999 Hz
>>>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>>>> cpu0 at mainbus0: apid 0 (boot processor)
>>>> cpu0: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2395.19 MHz
>>>> cpu0:
>>>>
>>>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>>>>
>>>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
>>>>
>>>> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
>>>>
>>>> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
>>>>
>>>> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
>>>> ,SENSOR,ARAT
>>>> cpu0: 256KB 64b/line 8-way L2 cache
>>>> cpu0: smt 0, core 0, package 0
>>>> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
>>>> cpu0: apic clock running at 23MHz
>>>> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
>>>> cpu1 at mainbus0: apid 2 (application processor)
>>>> cpu1: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
>>>> cpu1:
>>>>
>>>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>>>>
>>>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
>>>>
>>>> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
>>>>
>>>> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
>>>>
>>>> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
>>>> ,SENSOR,ARAT
>>>> cpu1: 256KB 64b/line 8-way L2 cache
>>>> cpu1: smt 0, core 1, package 0
>>>> cpu2 at mainbus0: apid 1 (application processor)
>>>> cpu2: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
>>>> cpu2:
>>>>
>>>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>>>>
>>>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
>>>>
>>>> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
>>>>
>>>> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
>>>>
>>>> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
>>>> ,SENSOR,ARAT
>>>> cpu2: 256KB 64b/line 8-way L2 cache
>>>> cpu2: smt 1, core 0, package 0
>>>> cpu3 at mainbus0: apid 3 (application processor)
>>>> cpu3: Intel(R) Core(TM) i7-6500U CPU @ 2.50GHz, 2394.41 MHz
>>>> cpu3:
>>>>
>>>> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
>>>>
>>>> H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
>>>>
>>>> ,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEA
>>>>
>>>> DLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FS
>>>>
>>>> GSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT
>>>> ,SENSOR,ARAT
>>>> cpu3: 256KB 64b/line 8-way L2 cache
>>>> cpu3: smt 1, core 1, package 0
>>>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
>>>> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
>>>> acpiprt0 at acpi0: bus 0 (PCI0)
>>>> acpiprt1 at acpi0: bus -1 (RP01)
>>>> acpiprt2 at acpi0: bus -1 (RP02)
>>>> acpiprt3 at acpi0: bus -1 (RP03)
>>>> acpiprt4 at acpi0: bus -1 (RP04)
>>>> acpiprt5 at acpi0: bus 1 (RP05)
>>>> acpiprt6 at acpi0: bus 2 (RP06)
>>>> acpiprt7 at acpi0: bus -1 (RP07)
>>>> acpiprt8 at acpi0: bus -1 (RP08)
>>>> acpiprt9 at acpi0: bus -1 (RP09)
>>>> acpiprt10 at acpi0: bus -1 (RP10)
>>>> acpiprt11 at acpi0: bus -1 (RP11)
>>>> acpiprt12 at acpi0: bus -1 (RP12)
>>>> acpiprt13 at acpi0: bus -1 (RP13)
>>>> acpiprt14 at acpi0: bus -1 (RP14)
>>>> acpiprt15 at acpi0: bus -1 (RP15)
>>>> acpiprt16 at acpi0: bus -1 (RP16)
>>>> acpiprt17 at acpi0: bus -1 (RP17)
>>>> acpiprt18 at acpi0: bus -1 (RP18)
>>>> acpiprt19 at acpi0: bus -1 (RP19)
>>>> acpiprt20 at acpi0: bus -1 (RP20)
>>>> acpiec0 at acpi0
>>>> acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>>>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>>>> acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>>>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>>>> acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>>>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>>>> acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
>>>> mwait.1@0x33), C1(1000@1 mwait.1), PSS
>>>> acpibat0 at acpi0: BAT0 model "L15M2PB5" serial  4971 type LiP oem "SMP"
>>>> "VPC2004" at acpi0 not configured
>>>> "INT3F0D" at acpi0 not configured
>>>> "MSFT0001" at acpi0 not configured
>>>> "SYN2B59" at acpi0 not configured
>>>> acpiac0 at acpi0: AC unit online
>>>> acpibtn0 at acpi0: LID0
>>>> acpibtn1 at acpi0: PWRB
>>>> "PNP0C14" at acpi0 not configured
>>>> "MSFT0101" at acpi0 not configured
>>>> "INT340E" at acpi0 not configured
>>>> acpivideo0 at acpi0: GFX0
>>>> acpivout0 at acpivideo0: DD1F
>>>> cpu0: Enhanced SpeedStep 2395 MHz: speeds: 2501, 2500, 2400, 2300,
>>>> 2100, 2000, 1800, 1700, 1500, 1300, 1200, 1000, 800, 700, 600, 400 MHz
>>>> pci0 at mainbus0 bus 0
>>>> pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x08
>>>> vga1 at pci0 dev 2 function 0 "Intel HD Graphics 520" rev 0x07
>>>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>>>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>>>> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi
>>>> usb0 at xhci0: USB revision 3.0
>>>> uhub0 at usb0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
>>>> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
>>>> "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
>>>> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi,
>>>> AHCI 1.3.1
>>>> ahci0: port 0: 6.0Gb/s
>>>> ahci0: port 1: 1.5Gb/s
>>>> scsibus1 at ahci0: 32 targets
>>>> sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZYLN256, EMT6> SCSI3
>>>> 0/direct fixed naa.5002538d00000000
>>>> sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin
>>>> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GUE0N, T.02> ATAPI
>>>> 5/cdrom removable
>>>> ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
>>>> pci1 at ppb0 bus 1
>>>> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
>>>> (0x5080), msi, address 50:7b:9d:f4:e3:3c
>>>> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
>>>> ppb1 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
>>>> pci2 at ppb1 bus 2
>>>> iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 3165" rev 0x99,
>>>> msi
>>>> pcib0 at pci0 dev 31 function 0 "Intel 100 Series LPC" rev 0x21
>>>> "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
>>>> azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x21:
>>>> msi
>>>> azalia0: codecs: Conexant/0x510f, Intel/0x2809, using Conexant/0x510f
>>>> audio0 at azalia0
>>>> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
>>>> apic 2 int 16
>>>> iic0 at ichiic0
>>>> isa0 at pcib0
>>>> isadma0 at isa0
>>>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>>>> pckbd0 at pckbc0 (kbd slot)
>>>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>>>> pms0 at pckbc0 (aux slot)
>>>> wsmouse0 at pms0 mux 0
>>>> pms0: Synaptics touchpad, firmware 8.1
>>>> pcppi0 at isa0 port 0x61
>>>> spkr0 at pcppi0
>>>> uhidev0 at uhub0 port 2 configuration 1 interface 0 "Microsoft USB
>>>> Optical Mouse" rev 2.00/2.00 addr 2
>>>> uhidev0: iclass 3/1
>>>> ums0 at uhidev0: 3 buttons, Z dir
>>>> wsmouse1 at ums0 mux 0
>>>> uvideo0 at uhub0 port 4 configuration 1 interface 0 "K3BG6I41V
>>>> EasyCamera" rev 2.00/0.06 addr 3
>>>> video0 at uvideo0
>>>> ugen0 at uhub0 port 5 "Generic USB2.0-CRW" rev 2.00/39.60 addr 4
>>>> ugen1 at uhub0 port 7 "Intel product 0x0a2a" rev 2.00/0.01 addr 5
>>>> vscsi0 at root
>>>> scsibus2 at vscsi0: 256 targets
>>>> softraid0 at root
>>>> scsibus3 at softraid0: 256 targets
>>>> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct
>>>> fixed
>>>> sd1: 244190MB, 512 bytes/sector, 500102858 sectors
>>>> root on sd1a (e858fdf181925872.a) swap on sd1b dump on sd1b
>>>> iwm0: hw rev 0x210, fw ver 16.242414.0, address b8:81:98:61:f6:61
>>
>
>
>
> --
>
> Cordialement, Coues Ludovic
> +336 148 743 42

Reply | Threaded
Open this post in threaded view
|

Re: Browser is getting slower?

George Pediaditis
In reply to this post by alan01346
i would prefer firefox but just playing a video cpu usage reach 100%
I use chromium/ iridium because firefox isnt usable on my laptop.
I tried deleting my profile but nothing change.
:-s


On Tue, Nov 22, 2016 at 2:55 PM, Alan Corey <[hidden email]> wrote:

> I don't use Chromium (don't tell me I don't need a menu) but in
> Firefox the user profile gets clogged up with cruft about once a year.
> A quick test is to just make a new profile and see if it's faster.
> Then copy over your bookmarks and gradually reestablish your cookies
> which keep you logged into sites between sessions by manually logging
> into each one.
>
> You can get to Firefox's profile manager with
> firefox -ProfileManager
> at a command line.  It's probably in the GUI somewhere.  I use
> Chromium about once a year, don't know much about it.
>
> --
> Credit is the root of all evil.  - AB1JX

Reply | Threaded
Open this post in threaded view
|

Re: Browser is getting slower?

Mihai Popescu-3
In reply to this post by George Pediaditis
Try a recent snapshot, they are stable enough for your laptop. And
install both firefox and chromium, they are working fine regarding
speed.
I have a slower computer than you and I can;t complain about speed.