Boot problem after power failure in OpenBSD 6.2 and later versions

classic Classic list List threaded Threaded
11 messages Options
Reply | Threaded
Open this post in threaded view
|

Boot problem after power failure in OpenBSD 6.2 and later versions

augusta bonaventura
Hi,

I am installing on the hardware mentioned below in OpenBSD 6.2 and 6.3
versions. When the Login menu comes, I turn off power supply (only 1 time)
for a power failure test. When the device reboots, it reboots itself when
it comes to the "boot>" menu.

However, even though I tried at least 10 times in 6.1 and earlier versions,
I did not encounter such a problem.

So, What is the difference between OpenBSD versions ? What might be the
cause of this situation? What kind of solution do you offer?

Thanks.

OpenBSD 6.1 dmesg output:

# dmesg
OpenBSD 6.1 (GENERIC.MP) #20: Sat Apr  1 13:45:56 MDT 2017
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17068920832 (16278MB)
avail mem = 16546938880 (15780MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x8d344000 (69 entries)
bios0: vendor American Megatrends Inc. version "5.12" date 12/19/2017
bios0: _ _
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SSDT SSDT UEFI SSDT LPIT
WSMT SSDT SSDT DBGP DBG2 DMAR ASF!
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4)
PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4) RP12(S4)
PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, 3408.00 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 3408000000 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, 3408.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, 3408.00 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, 3408.00 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, 3408.00 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, 3408.00 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, 3408.00 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 2, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, 3408.00 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 10 (RP09)
acpiprt5 at acpi0: bus 11 (RP10)
acpiprt6 at acpi0: bus 12 (RP11)
acpiprt7 at acpi0: bus 13 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus 1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus 7 (RP06)
acpiprt15 at acpi0: bus 8 (RP07)
acpiprt16 at acpi0: bus 9 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu4 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu5 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu6 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu7 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpitz0 at acpi0: critical temperature is 127 degC
"MSFT0001" at acpi0 not configured
"MSFT0003" at acpi0 not configured
"PNP0501" at acpi0 not configured
"INT3F0D" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"INT340E" at acpi0 not configured
acpivideo0 at acpi0: GFX0
cpu0: Enhanced SpeedStep 3408 MHz: speeds: 3401, 3400, 3200, 3000, 2800,
2700, 2500, 2300, 2100, 1900, 1700, 1500, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
"Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 100 Series KT" rev 0x31: ports: 1 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi, AHCI
1.3.1
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Crucial_CT525MX3, M0C> SCSI3 0/direct
fixed naa.500a0751162e283a
sd0: 500786MB, 512 bytes/sector, 1025610768 sectors, thin
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 vendor "Pericom", unknown product 0x2608 rev
0x00
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 vendor "Pericom", unknown product 0x2608 rev
0x00: msi
pci3 at ppb2 bus 3
em0 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:c9:f6:85
ppb3 at pci2 dev 2 function 0 vendor "Pericom", unknown product 0x2608 rev
0x00: msi
pci4 at ppb3 bus 4
em1 at pci4 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:c9:f6:86
ppb4 at pci2 dev 3 function 0 vendor "Pericom", unknown product 0x2608 rev
0x00: msi
pci5 at ppb4 bus 5
em2 at pci5 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:c9:f6:87
ppb5 at pci2 dev 4 function 0 vendor "Pericom", unknown product 0x2608 rev
0x00: msi
pci6 at ppb5 bus 6
em3 at pci6 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:c9:f6:88
ppb6 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci7 at ppb6 bus 7
em4 at pci7 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:d9
ppb7 at pci0 dev 28 function 6 "Intel 100 Series PCIE" rev 0xf1: msi
pci8 at ppb7 bus 8
em5 at pci8 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:da
ppb8 at pci0 dev 28 function 7 "Intel 100 Series PCIE" rev 0xf1: msi
pci9 at ppb8 bus 9
em6 at pci9 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:db
ppb9 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci10 at ppb9 bus 10
em7 at pci10 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:dc
ppb10 at pci0 dev 29 function 1 "Intel 100 Series PCIE" rev 0xf1: msi
pci11 at ppb10 bus 11
em8 at pci11 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:dd
ppb11 at pci0 dev 29 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci12 at ppb11 bus 12
em9 at pci12 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:de
ppb12 at pci0 dev 29 function 3 "Intel 100 Series PCIE" rev 0xf1: msi
pci13 at ppb12 bus 13
em10 at pci13 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:df
pcib0 at pci0 dev 31 function 0 "Intel Q170 LPC" rev 0x31
"Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 100 Series HD Audio" rev 0x31: msi
azalia0: no supported codecs
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31: apic 2
int 16
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
em11 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x31: msi, address
00:30:18:cd:63:d8
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 1 configuration 1 interface 0 "vendor 0x09da USB
Keyboard" rev 1.10/2.50 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 1 configuration 1 interface 1 "vendor 0x09da USB
Keyboard" rev 1.10/2.50 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (5dc4b8e404f0ea04.a) swap on sd0b dump on sd0b


OpenBSD 6.2 dmesg output:

OpenBSD 6.2 (RAMDISK_CD) #132: Tue Oct  3 21:26:51 MDT 2017
    [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 17068920832 (16278MB)
avail mem = 16547860480 (15781MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x8d344000 (69 entries)
bios0: vendor American Megatrends Inc. version "5.12" date 12/19/2017
bios0: _ _
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SSDT SSDT UEFI SSDT LPIT
WSMT SSDT SSDT DBGP DBG2 DMAR ASF!
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz, 3408.00 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 3408000000 Hz
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 10 (RP09)
acpiprt5 at acpi0: bus 11 (RP10)
acpiprt6 at acpi0: bus 12 (RP11)
acpiprt7 at acpi0: bus 13 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus 1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus -1 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus 7 (RP06)
acpiprt15 at acpi0: bus 8 (RP07)
acpiprt16 at acpi0: bus 9 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpitz at acpi0 not configured
"MSFT0001" at acpi0 not configured
"MSFT0003" at acpi0 not configured
"INT3F0D" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
"INT340E" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 6G Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel HD Graphics 530" rev 0x06
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 100 Series Thermal" rev 0x31 at pci0 dev 20 function 2 not configured
"Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
"Intel 100 Series KT" rev 0x31 at pci0 dev 22 function 3 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi, AHCI
1.3.1
ahci0: port 0: 6.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Crucial_CT525MX3, M0C> SCSI3 0/direct
fixed naa.500a0751162e283a
sd0: 500786MB, 512 bytes/sector, 1025610768 sectors, thin
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Pericom PI7C9X2G608GP PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci2 dev 1 function 0 "Pericom PI7C9X2G608GP PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
em0 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:c9:f6:85
ppb3 at pci2 dev 2 function 0 "Pericom PI7C9X2G608GP PCIE" rev 0x00: msi
pci4 at ppb3 bus 4
em1 at pci4 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:c9:f6:86
ppb4 at pci2 dev 3 function 0 "Pericom PI7C9X2G608GP PCIE" rev 0x00: msi
pci5 at ppb4 bus 5
em2 at pci5 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:c9:f6:87
ppb5 at pci2 dev 4 function 0 "Pericom PI7C9X2G608GP PCIE" rev 0x00: msi
pci6 at ppb5 bus 6
em3 at pci6 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:c9:f6:88
ppb6 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci7 at ppb6 bus 7
em4 at pci7 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:d9
ppb7 at pci0 dev 28 function 6 "Intel 100 Series PCIE" rev 0xf1: msi
pci8 at ppb7 bus 8
em5 at pci8 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:da
ppb8 at pci0 dev 28 function 7 "Intel 100 Series PCIE" rev 0xf1: msi
pci9 at ppb8 bus 9
em6 at pci9 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:db
ppb9 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci10 at ppb9 bus 10
em7 at pci10 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:dc
ppb10 at pci0 dev 29 function 1 "Intel 100 Series PCIE" rev 0xf1: msi
pci11 at ppb10 bus 11
em8 at pci11 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:dd
ppb11 at pci0 dev 29 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci12 at ppb11 bus 12
em9 at pci12 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:de
ppb12 at pci0 dev 29 function 3 "Intel 100 Series PCIE" rev 0xf1: msi
pci13 at ppb12 bus 13
em10 at pci13 dev 0 function 0 "Intel I211" rev 0x03: msi, address
00:30:18:cd:63:df
"Intel Q170 LPC" rev 0x31 at pci0 dev 31 function 0 not configured
"Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
"Intel 100 Series HD Audio" rev 0x31 at pci0 dev 31 function 3 not
configured
"Intel 100 Series SMBus" rev 0x31 at pci0 dev 31 function 4 not configured
em11 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x31: msi, address
00:30:18:cd:63:d8
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhidev0 at uhub0 port 1 configuration 1 interface 0 "vendor 0x09da USB
Keyboard" rev 1.10/2.50 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay1
uhidev1 at uhub0 port 1 configuration 1 interface 1 "vendor 0x09da USB
Keyboard" rev 1.10/2.50 addr 2
uhidev1: iclass 3/0, 2 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
umass0 at uhub0 port 2 configuration 1 interface 0 "MediaTek Inc MT1836"
rev 2.00/0.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, DVDRAM GP10NB20, 1.01> SCSI0
5/cdrom removable serial.0e8d18363HA2956_
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
Reply | Threaded
Open this post in threaded view
|

Re: Boot problem after power failure in OpenBSD 6.2 and later versions

Il Ka
 > When the device reboots, it reboots itself when
>  it comes to the "boot>" menu.

What do you mean "reboots itself "?

boot(8) reboots your machine instead of booting kernel with out of any
output?
Reply | Threaded
Open this post in threaded view
|

Re: Boot problem after power failure in OpenBSD 6.2 and later versions

augusta bonaventura
It means OpenBSD is constantly restarting itself.

2018-04-20 23:01 GMT+03:00 IL Ka <[hidden email]>:

> > When the device reboots, it reboots itself when
> >  it comes to the "boot>" menu.
>
> What do you mean "reboots itself "?
>
> boot(8) reboots your machine instead of booting kernel with out of any
> output?
>
>
Reply | Threaded
Open this post in threaded view
|

Re: Boot problem after power failure in OpenBSD 6.2 and later versions

Il Ka
Does it reboot itself without of any message?

Try to break in boot(8) menu (by clicking any key when boot prompt created)
and boot kernel in single user mode (boot -s).

If it does not help, boot from flash/cdrom (as you probably done accroding
to dmesg) and fsck your harddrive/ssd partitions.
Are they clean?
Mount them, and check /bsd exists on root (.a)


On Fri, Apr 20, 2018 at 11:23 PM, augusta bonaventura <[hidden email]>
wrote:

> It means OpenBSD is constantly restarting itself.
>
> 2018-04-20 23:01 GMT+03:00 IL Ka <[hidden email]>:
>
>> > When the device reboots, it reboots itself when
>> >  it comes to the "boot>" menu.
>>
>> What do you mean "reboots itself "?
>>
>> boot(8) reboots your machine instead of booting kernel with out of any
>> output?
>>
>>
>
Reply | Threaded
Open this post in threaded view
|

Re: Boot problem after power failure in OpenBSD 6.2 and later versions

augusta bonaventura
It is constantly restarting itself without of any message.
When I type in "boot -s", the device reboots itself again.
As you said, I booted from flash / cdrom and fsck all the partitions, but
that did not help either.
Also I checked /bsd exists on root
However, the system can not be booted.

I dont know what is the weakness.
Thanks.

2018-04-20 23:34 GMT+03:00 IL Ka <[hidden email]>:

> Does it reboot itself without of any message?
>
> Try to break in boot(8) menu (by clicking any key when boot prompt created)
> and boot kernel in single user mode (boot -s).
>
> If it does not help, boot from flash/cdrom (as you probably done accroding
> to dmesg) and fsck your harddrive/ssd partitions.
> Are they clean?
> Mount them, and check /bsd exists on root (.a)
>
>
> On Fri, Apr 20, 2018 at 11:23 PM, augusta bonaventura <
> [hidden email]> wrote:
>
>> It means OpenBSD is constantly restarting itself.
>>
>> 2018-04-20 23:01 GMT+03:00 IL Ka <[hidden email]>:
>>
>>> > When the device reboots, it reboots itself when
>>> >  it comes to the "boot>" menu.
>>>
>>> What do you mean "reboots itself "?
>>>
>>> boot(8) reboots your machine instead of booting kernel with out of any
>>> output?
>>>
>>>
>>
>
Reply | Threaded
Open this post in threaded view
|

Re: Boot problem after power failure in OpenBSD 6.2 and later versions

Il Ka
Please provide list of disks reported by boot(8) (i.e. hd0..)

Try to boot CD kernel from your disk boot ]
i.e: boot from harddrive, and in boot> prompt try
something like "cd0:/6.3/bsd" (not sure about exact syntax, check man)

If it does not work, then you need to reinstall your boot and kernel from
/altroot or cd or openbsd website.
 (and you will
need to reinstall biosboot also (see installboot(8))


On Fri, Apr 20, 2018 at 11:48 PM, augusta bonaventura <[hidden email]>
wrote:

> It is constantly restarting itself without of any message.
> When I type in "boot -s", the device reboots itself again.
> As you said, I booted from flash / cdrom and fsck all the partitions, but
> that did not help either.
> Also I checked /bsd exists on root
> However, the system can not be booted.
>
> I dont know what is the weakness.
> Thanks.
>
> 2018-04-20 23:34 GMT+03:00 IL Ka <[hidden email]>:
>
>> Does it reboot itself without of any message?
>>
>> Try to break in boot(8) menu (by clicking any key when boot prompt
>> created)
>> and boot kernel in single user mode (boot -s).
>>
>> If it does not help, boot from flash/cdrom (as you probably done
>> accroding to dmesg) and fsck your harddrive/ssd partitions.
>> Are they clean?
>> Mount them, and check /bsd exists on root (.a)
>>
>>
>> On Fri, Apr 20, 2018 at 11:23 PM, augusta bonaventura <
>> [hidden email]> wrote:
>>
>>> It means OpenBSD is constantly restarting itself.
>>>
>>> 2018-04-20 23:01 GMT+03:00 IL Ka <[hidden email]>:
>>>
>>>> > When the device reboots, it reboots itself when
>>>> >  it comes to the "boot>" menu.
>>>>
>>>> What do you mean "reboots itself "?
>>>>
>>>> boot(8) reboots your machine instead of booting kernel with out of any
>>>> output?
>>>>
>>>>
>>>
>>
>
Reply | Threaded
Open this post in threaded view
|

Re: Boot problem after power failure in OpenBSD 6.2 and later versions

augusta bonaventura
Reinstalling the operating system seems to solve the problem.
But my main question is different: Why does this problem happen in the
release 6.2 and later versions? The same process does not cause the problem
in version 6.1.
Reinstalling the operating system every time can not be a solution, right?

2018-04-21 0:00 GMT+03:00 IL Ka <[hidden email]>:

> Please provide list of disks reported by boot(8) (i.e. hd0..)
>
> Try to boot CD kernel from your disk boot ]
> i.e: boot from harddrive, and in boot> prompt try
> something like "cd0:/6.3/bsd" (not sure about exact syntax, check man)
>
> If it does not work, then you need to reinstall your boot and kernel from
> /altroot or cd or openbsd website.
>  (and you will
> need to reinstall biosboot also (see installboot(8))
>
>
> On Fri, Apr 20, 2018 at 11:48 PM, augusta bonaventura <
> [hidden email]> wrote:
>
>> It is constantly restarting itself without of any message.
>> When I type in "boot -s", the device reboots itself again.
>> As you said, I booted from flash / cdrom and fsck all the partitions, but
>> that did not help either.
>> Also I checked /bsd exists on root
>> However, the system can not be booted.
>>
>> I dont know what is the weakness.
>> Thanks.
>>
>> 2018-04-20 23:34 GMT+03:00 IL Ka <[hidden email]>:
>>
>>> Does it reboot itself without of any message?
>>>
>>> Try to break in boot(8) menu (by clicking any key when boot prompt
>>> created)
>>> and boot kernel in single user mode (boot -s).
>>>
>>> If it does not help, boot from flash/cdrom (as you probably done
>>> accroding to dmesg) and fsck your harddrive/ssd partitions.
>>> Are they clean?
>>> Mount them, and check /bsd exists on root (.a)
>>>
>>>
>>> On Fri, Apr 20, 2018 at 11:23 PM, augusta bonaventura <
>>> [hidden email]> wrote:
>>>
>>>> It means OpenBSD is constantly restarting itself.
>>>>
>>>> 2018-04-20 23:01 GMT+03:00 IL Ka <[hidden email]>:
>>>>
>>>>> > When the device reboots, it reboots itself when
>>>>> >  it comes to the "boot>" menu.
>>>>>
>>>>> What do you mean "reboots itself "?
>>>>>
>>>>> boot(8) reboots your machine instead of booting kernel with out of any
>>>>> output?
>>>>>
>>>>>
>>>>
>>>
>>
>
Reply | Threaded
Open this post in threaded view
|

Re: Boot problem after power failure in OpenBSD 6.2 and later versions

Solene Rapenne
In reply to this post by augusta bonaventura
Le 2018-04-20 21:41, augusta bonaventura a écrit :

> Hi,
>
> I am installing on the hardware mentioned below in OpenBSD 6.2 and 6.3
> versions. When the Login menu comes, I turn off power supply (only 1
> time)
> for a power failure test. When the device reboots, it reboots itself
> when
> it comes to the "boot>" menu.
>
> However, even though I tried at least 10 times in 6.1 and earlier
> versions,
> I did not encounter such a problem.
>
> So, What is the difference between OpenBSD versions ? What might be the
> cause of this situation? What kind of solution do you offer?
>
> Thanks.
>
> OpenBSD 6.1 dmesg output:
>

After the power failure, can you try to fsck and see what happens ?
You can use a CD or an usb install support for this.

Reply | Threaded
Open this post in threaded view
|

Re: Boot problem after power failure in OpenBSD 6.2 and later versions

Il Ka
In reply to this post by augusta bonaventura
>
> Reinstalling the operating system seems to solve the problem.
>
Almost never you need to reinstall OpenBSD.

There are only 2 parts that could be broken in your case:
boot(8) and kernel itself (/bsd).
Both could be downloaded from CD or ftp.OpenBSD.org website

That is why I told you to try to boot CD kernel using your boot(8) (and
vice versa)
to check which one is broken and then replace it.

But you reinstalled OS, so we will not know it.

But my main question is different: Why does this problem happen in the
> release 6.2 and later versions? The same process does not cause the problem
> in version 6.1.
>
I do not know..
Unexpected reboot is always some kind of lottery, that is why people use
backups and even store /etc/ in vcs
and OpenBSD has /altroot where it copies kernel and other files

FFS does its best to save filesystem metadata (unless you enable async
mount option explicitly, which you did not do I am sure)
and fsck (fsck -f ?) almost always helps.

It could be that it has nothing to do with OpenBSD version: just an accident
Reply | Threaded
Open this post in threaded view
|

Re: Boot problem after power failure in OpenBSD 6.2 and later versions

augusta bonaventura
There is no problem when I reboot many times. Whenever I turn off power
supply hardly, it comes with problem.
it is not a solution for me to implement the solutions you specify. I
installed/updated(boot-kernel) it several times after our correspondence
with you.
I have done the same process many times in 6.1, but I have not had a
problem.
I think, the tests i've made and the problems i've experienced originate
from the 6.2 version of the change.

2018-04-21 4:43 GMT+03:00 IL Ka <[hidden email]>:

> Reinstalling the operating system seems to solve the problem.
>>
> Almost never you need to reinstall OpenBSD.
>
> There are only 2 parts that could be broken in your case:
> boot(8) and kernel itself (/bsd).
> Both could be downloaded from CD or ftp.OpenBSD.org website
>
> That is why I told you to try to boot CD kernel using your boot(8) (and
> vice versa)
> to check which one is broken and then replace it.
>
> But you reinstalled OS, so we will not know it.
>
> But my main question is different: Why does this problem happen in the
>> release 6.2 and later versions? The same process does not cause the problem
>> in version 6.1.
>>
> I do not know..
> Unexpected reboot is always some kind of lottery, that is why people use
> backups and even store /etc/ in vcs
> and OpenBSD has /altroot where it copies kernel and other files
>
> FFS does its best to save filesystem metadata (unless you enable async
> mount option explicitly, which you did not do I am sure)
> and fsck (fsck -f ?) almost always helps.
>
> It could be that it has nothing to do with OpenBSD version: just an
> accident
>
>
Reply | Threaded
Open this post in threaded view
|

Re: Boot problem after power failure in OpenBSD 6.2 and later versions

Sebastian Benoit
augusta bonaventura([hidden email]) on 2018.04.21 10:55:54 +0300:
> There is no problem when I reboot many times. Whenever I turn off power
> supply hardly, it comes with problem.
> it is not a solution for me to implement the solutions you specify. I
> installed/updated(boot-kernel) it several times after our correspondence
> with you.
> I have done the same process many times in 6.1, but I have not had a
> problem.
> I think, the tests i've made and the problems i've experienced originate
> from the 6.2 version of the change.

earlier you wrote:

> I am installing on the hardware mentioned below in OpenBSD 6.2 and 6.3
> versions. When the Login menu comes, I turn off power supply (only 1 time)
> for a power failure test. When the device reboots, it reboots itself when
> it comes to the "boot>" menu.

you say this is repeatable?

Does it also happen when you let the system sit at the login prompt for some
time, say 5 minutes, before pulling the plug?

When it happens, can you still boot with

   > boot /bsd.booted

or, if /bsd.booted does not exist, with

   > boot /obsd

at the bootloader prompt?

/Benno

 

> 2018-04-21 4:43 GMT+03:00 IL Ka <[hidden email]>:
>
> > Reinstalling the operating system seems to solve the problem.
> >>
> > Almost never you need to reinstall OpenBSD.
> >
> > There are only 2 parts that could be broken in your case:
> > boot(8) and kernel itself (/bsd).
> > Both could be downloaded from CD or ftp.OpenBSD.org website
> >
> > That is why I told you to try to boot CD kernel using your boot(8) (and
> > vice versa)
> > to check which one is broken and then replace it.
> >
> > But you reinstalled OS, so we will not know it.
> >
> > But my main question is different: Why does this problem happen in the
> >> release 6.2 and later versions? The same process does not cause the problem
> >> in version 6.1.
> >>
> > I do not know..
> > Unexpected reboot is always some kind of lottery, that is why people use
> > backups and even store /etc/ in vcs
> > and OpenBSD has /altroot where it copies kernel and other files
> >
> > FFS does its best to save filesystem metadata (unless you enable async
> > mount option explicitly, which you did not do I am sure)
> > and fsck (fsck -f ?) almost always helps.
> >
> > It could be that it has nothing to do with OpenBSD version: just an
> > accident
> >
> >
>

--