AR9271 athn0: could not load firmware on OpenBSD 6.3 amd64

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

AR9271 athn0: could not load firmware on OpenBSD 6.3 amd64

Denis Lapshin-2
1. AR9271 USB stick has been connected to OpenBSD 6.3 amd64
2. # fw_update
3. # ls /etc/firmware | grep athn
athn-ar7010
athn-ar7010-11
athn-ar9271
athn-license
athn-open-ar7010
athn-open-ar9271
athn-open-license

After reconnecting AR9271
athn0: could not load firmware

When I remove athn-open-* firmware files from /etc/firmware
athn0: failed loadfirmware of file athn-open-ar9271 (error 2)
athn0: could not load firmware

In OpenBSD 6.2 amd64 /etc/firmware contains only athn-ar7010,
athn-ar7010-11, and ar9271. The USB stick works with it.

I think it could be working again if I load non athn-open-* versions of
firmware provided.

My question is how to load non open version (athn-ar9271) of the athn
firmware to have AR9271 working?

athn0: failed error message has a typo 'loadfirmware' without a space.

Thank you for answer in advance.


Reply | Threaded
Open this post in threaded view
|

Re: AR9271 athn0: could not load firmware on OpenBSD 6.3 amd64

Stefan Sperling-5
On Thu, Apr 05, 2018 at 05:30:25PM +0300, Denis wrote:

> 1. AR9271 USB stick has been connected to OpenBSD 6.3 amd64
> 2. # fw_update
> 3. # ls /etc/firmware | grep athn
> athn-ar7010
> athn-ar7010-11
> athn-ar9271
> athn-license
> athn-open-ar7010
> athn-open-ar9271
> athn-open-license
>
> After reconnecting AR9271
> athn0: could not load firmware

I don't know why the firmware doesn't load for you.
It all works fine for me, with both AR9271 devices and AR7010 devices.

There is a known issue which looks like this device does not power up
properly on some machines, and in some configurations, for example
when it is plugged behind a USB 2.0 hub.
This results in a failure to load the firmware but it the underlying
issue is a different problem which nobody has figured out yet.
It could be a bug in our USB stack.

However, this is inconsistent with your observation that it worked
in 6.2. It sounds like nothing else changed?
 
> When I remove athn-open-* firmware files from /etc/firmware
> athn0: failed loadfirmware of file athn-open-ar9271 (error 2)
> athn0: could not load firmware
>
> In OpenBSD 6.2 amd64 /etc/firmware contains only athn-ar7010,
> athn-ar7010-11, and ar9271. The USB stick works with it.

Is this 6.2 install on the same machine, or on a different machine?
If it's a different machine, could you try 6.3 on the same machine
where you tested 6.2?

> I think it could be working again if I load non athn-open-* versions of
> firmware provided.
>
> My question is how to load non open version (athn-ar9271) of the athn
> firmware to have AR9271 working?

You cannot.
The driver in 6.3 does not support the old closed source firmware
anymore. It only supports the open firmware.

It's unfortunate that this change broke it for you, but I cannot
explain why. When this change was made about 2 months ago I did
not get any negative reports.
See https://marc.info/?l=openbsd-tech&m=151769894925027&w=2

> athn0: failed error message has a typo 'loadfirmware' without a space.

That's intentional. It refers to the function loadfirmware(9):
http://man.openbsd.org/loadfirmware

Reply | Threaded
Open this post in threaded view
|

Re: AR9271 athn0: could not load firmware on OpenBSD 6.3 amd64

Denis Lapshin-2
In reply to this post by Denis Lapshin-2
I forgot to mention one more issue with 'fw_update' command on the same
OpenBSD 6.3 amd64.

When I run # fw_update it is looking for a package, but can't find it.
With error:

http://firmware.openbsd.org/firmware/6.3/: ftp: connect: No route to host
http://firmware.openbsd.org/firmware/6.3/: empty
Can't find athn-firmware
Can't find vmm-firmware

The Internet connection is stable broadband one, ISP provides DNS
servers and they are in /etc/resolv.conf before fw_update run.

I can ping any Internet resource even firmware.openbsd.org, but
'fw_update' don't work with the error above.

If I visited http://firmware.openbsd.org/firmware/6.3/ from browser, I
can download all the firmware images I need.


On 4/5/2018 5:30 PM, Denis wrote:

> 1. AR9271 USB stick has been connected to OpenBSD 6.3 amd64
> 2. # fw_update
> 3. # ls /etc/firmware | grep athn
> athn-ar7010
> athn-ar7010-11
> athn-ar9271
> athn-license
> athn-open-ar7010
> athn-open-ar9271
> athn-open-license
>
> After reconnecting AR9271
> athn0: could not load firmware
>
> When I remove athn-open-* firmware files from /etc/firmware
> athn0: failed loadfirmware of file athn-open-ar9271 (error 2)
> athn0: could not load firmware
>
> In OpenBSD 6.2 amd64 /etc/firmware contains only athn-ar7010,
> athn-ar7010-11, and ar9271. The USB stick works with it.
>
> I think it could be working again if I load non athn-open-* versions of
> firmware provided.
>
> My question is how to load non open version (athn-ar9271) of the athn
> firmware to have AR9271 working?
>
> athn0: failed error message has a typo 'loadfirmware' without a space.
>
> Thank you for answer in advance.
>
>

Reply | Threaded
Open this post in threaded view
|

Re: AR9271 athn0: could not load firmware on OpenBSD 6.3 amd64

Denis Lapshin-2
In reply to this post by Stefan Sperling-5
Stefan,

You're right the machine with installed 6.3 is completely different than
6.2 currently running.

Here is dmesg of 6.3 machine:

OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 7964327936 (7595MB)
avail mem = 7715876864 (7358MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe0840 (38 entries)
bios0: vendor Phoenix Technologies Ltd. version "SBCFP4_3.0.0.312_11
X64" date 09/21/2014
bios0: CompuLab fit-PC4
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG FPDT UEFI POAT BATB SSDT SSDT UEFI
acpi0: wakeup devices GPP0(S4) GPP1(S4) GPP2(S4) GPP3(S4) GFX_(S4)
XHC0(S4) OHC1(S4) EHC1(S4) OHC2(S4) EHC2(S4) SBAZ(S4) UAR1(S3)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpihpet0 at acpi0: 14318180 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD GX-420CA SOC with Radeon(tm) HD Graphics, 1996.49 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXS
\
R,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F
\
16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PCTRL3,ITSC,BMI1

cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
acpihpet0: recalibrated TSC frequency 1996262805 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD GX-420CA SOC with Radeon(tm) HD Graphics, 1996.26 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXS
\
R,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F
\
16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PCTRL3,ITSC,BMI1

cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD GX-420CA SOC with Radeon(tm) HD Graphics, 1996.26 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXS
\
R,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F
\
16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PCTRL3,ITSC,BMI1

cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD GX-420CA SOC with Radeon(tm) HD Graphics, 1996.26 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXS
\
R,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F
\
16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PCTRL3,ITSC,BMI1

cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
, remapped to apid 4
ioapic1 at mainbus0: apid 5 pa 0xfec01000, version 21, 32 pins
, remapped to apid 5
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (GPP0)
acpiprt2 at acpi0: bus -1 (GPP1)
acpiprt3 at acpi0: bus 4 (GPP2)
acpiprt4 at acpi0: bus 5 (GPP3)
acpiprt5 at acpi0: bus 1 (GFX_)
acpicpu0 at acpi0: C2(0@400 io@0x841), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@400 io@0x841), C1(@1 halt!), PSS
acpicpu2 at acpi0: C2(0@400 io@0x841), C1(@1 halt!), PSS
acpicpu3 at acpi0: C2(0@400 io@0x841), C1(@1 halt!), PSS
acpibtn0 at acpi0: PWRB
"PNP0A05" at acpi0 not configured
acpivideo0 at acpi0: VGA_
cpu0: 1996 MHz: speeds: 2000 1800 1600 1200 1000 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Host" rev 0x00
vga1 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x9831 rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 1 function 1 "ATI Radeon HD Audio" rev 0x00: msi
azalia0: no supported codecs
pchb1 at pci0 dev 2 function 0 vendor "AMD", unknown product 0x1538 rev 0x00
ppb0 at pci0 dev 2 function 1 "AMD AMD64 16h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR5418" rev 0x01: apic 5 int 4
athn0: MAC AR5418 rev 2, RF AR5133 (2T3R), ROM rev 5, address
xx:xx:xx:xx:xx:xx
ppb2 at pci0 dev 2 function 4 "AMD AMD64 16h PCIE" rev 0x00: msi
pci3 at ppb2 bus 4
em0 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address
xx:xx:xx:xx:xx:xx
ppb3 at pci0 dev 2 function 5 "AMD AMD64 16h PCIE" rev 0x00: msi
pci4 at ppb3 bus 5
em1 at pci4 dev 0 function 0 "Intel I211" rev 0x03: msi, address
xx:xx:xx:xx:xx:xx
xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x01: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev
3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST500, 0001> SCSI3 0/direct fixed
naa.5000c500ac5b7fb7
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x39: apic 4 int
18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev
2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x39: apic 4 int
18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 17
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev
2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x3a: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x02: apic
4 int 16
azalia1: codecs: Realtek ALC888
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
sdhc0 at pci0 dev 20 function 7 "AMD Bolton SD/MMC" rev 0x01: apic 4 int 16
sdhc0: SDHC 2.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
pchb2 at pci0 dev 24 function 0 "AMD AMD64 16h Link Cfg" rev 0x00
pchb3 at pci0 dev 24 function 1 "AMD AMD64 16h Address Map" rev 0x00
pchb4 at pci0 dev 24 function 2 "AMD AMD64 16h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 16h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD AMD64 16h CPU Power" rev 0x00
pchb6 at pci0 dev 24 function 5 vendor "AMD", unknown product 0x1535 rev
0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev
1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev
1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: SVM/RVI
sdmmc0: can't enable card
axen0 at uhub0 port 1 configuration 1 interface 0 "ASIX Elec. Corp.
AX88179" rev 3.00/1.00 addr 2
axen0: AX88179, address xx:xx:xx:xx:xx:xx
rgephy0 at axen0 phy 3: RTL8169S/8110S/8211 PHY, rev. 5
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Dell Dell Smart
Card Reader Keyboard" rev 2.00/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
ugen0 at uhub3 port 1 configuration 1 "Dell Dell Smart Card Reader
Keyboard" rev 2.00/1.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: sd1 was not shutdown properly
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 476937MB, 512 bytes/sector, 976767473 sectors
root on sd1a (9990ff6713f15d12.a) swap on sd1b dump on sd1b
WARNING: / was not properly unmounted

-----------------------------------------

OpenBSD 6.2 (GENERIC.MP) #1: Thu Jan 18 11:09:28 UTC 2018
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8451125248 (8059MB)
avail mem = 8192278528 (7812MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (64 entries)
bios0: vendor LENOVO version "8DET72WW (1.42 )" date 02/18/2016
bios0: LENOVO 5491C51
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF!
TCPA SSDT SSDT DMAR UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4)
EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2791.33 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI
\
,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3
\
,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT

cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2791332320 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2790.93 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI
\
,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3
\
,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT

cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2790.93 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI
\
,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3
\
,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT

cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2790.93 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI
\
,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3
\
,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT

cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus 14 (EXP7)
acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
"LEN0020" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1172" serial 14231 type LION oem "SANYO"
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
"IBM0079" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpidock0 at acpi0: GDCK docked (15)
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
acpivideo1 at acpi0: VID_
cpu0: Enhanced SpeedStep 2791 MHz: speeds: 2801, 2800, 2600, 2400, 2200,
2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
f0:de:f1:d1:9d:19
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
pci2 at ppb1 bus 3
athn0 at pci2 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 2 int 17
athn0: AR9280 rev 2 (2T2R), ROM rev 22, address 70:f1:a1:7f:ca:63
ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
pci4 at ppb3 bus 13
sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
sdhc0: SDHC 3.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb4 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
pci5 at ppb4 bus 14
xhci0 at pci5 dev 0 function 0 "NEC xHCI" rev 0x04: msi
usb1 at xhci0: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev
3.00/1.00 addr 1
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, ST750LX003, 0002> SCSI3 0/direct fixed
sd0: 698940MB, 512 bytes/sector, 1356773168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic
2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
vmm0 at mainbus0: VMX/EPT
uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
uhub4 at uhub3 port 1 configuration 1 interface 0 "Standard
Microsystems" rev 2.00/0.00 addr 3
run0 at uhub4 port 2 configuration 1 interface 0 "Ralink 3070" rev
2.00/1.01 addr 4
run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address
xx:xx:xx:xx:xx:xx
uhub5 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
ugen0 at uhub5 port 6 "OMNIKEY" rev 2.00/2.03 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: sd1 was not shutdown properly
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed

----------------------

Stefan, I can't test 6.3 on the machine which has 6.2 currently
installed. Will do it a bit later (hope next week).

Thank you for attention to the problem present.

On 4/5/2018 6:09 PM, Stefan Sperling wrote:

> On Thu, Apr 05, 2018 at 05:30:25PM +0300, Denis wrote:
>> 1. AR9271 USB stick has been connected to OpenBSD 6.3 amd64
>> 2. # fw_update
>> 3. # ls /etc/firmware | grep athn
>> athn-ar7010
>> athn-ar7010-11
>> athn-ar9271
>> athn-license
>> athn-open-ar7010
>> athn-open-ar9271
>> athn-open-license
>>
>> After reconnecting AR9271
>> athn0: could not load firmware
>
> I don't know why the firmware doesn't load for you.
> It all works fine for me, with both AR9271 devices and AR7010 devices.
>
> There is a known issue which looks like this device does not power up
> properly on some machines, and in some configurations, for example
> when it is plugged behind a USB 2.0 hub.
> This results in a failure to load the firmware but it the underlying
> issue is a different problem which nobody has figured out yet.
> It could be a bug in our USB stack.
>
> However, this is inconsistent with your observation that it worked
> in 6.2. It sounds like nothing else changed?
>  
>> When I remove athn-open-* firmware files from /etc/firmware
>> athn0: failed loadfirmware of file athn-open-ar9271 (error 2)
>> athn0: could not load firmware
>>
>> In OpenBSD 6.2 amd64 /etc/firmware contains only athn-ar7010,
>> athn-ar7010-11, and ar9271. The USB stick works with it.
>
> Is this 6.2 install on the same machine, or on a different machine?
> If it's a different machine, could you try 6.3 on the same machine
> where you tested 6.2?
>
>> I think it could be working again if I load non athn-open-* versions of
>> firmware provided.
>>
>> My question is how to load non open version (athn-ar9271) of the athn
>> firmware to have AR9271 working?
>
> You cannot.
> The driver in 6.3 does not support the old closed source firmware
> anymore. It only supports the open firmware.
>
> It's unfortunate that this change broke it for you, but I cannot
> explain why. When this change was made about 2 months ago I did
> not get any negative reports.
> See https://marc.info/?l=openbsd-tech&m=151769894925027&w=2
>
>> athn0: failed error message has a typo 'loadfirmware' without a space.
>
> That's intentional. It refers to the function loadfirmware(9):
> http://man.openbsd.org/loadfirmware
>

Reply | Threaded
Open this post in threaded view
|

Re: AR9271 athn0: could not load firmware on OpenBSD 6.3 amd64

Denis Lapshin-2
For test I've just updated OpenBSD from 6.2amd64 to 6.3amd64 on Intel
based machine (shortened dmesg is listed below) and there is no 'athn0:
could not load firmware' error appears after upgrade. On Intel's
platform AR9271 works as expected.

On AMD based machine 'athn0: could not load firmware' error is
permanent. AR9271 does not work completely on AMD GX-420CA SOC. Full
dmesg of AMD machine fully listed in my previous message.

OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018
     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8451125248 (8059MB)
avail mem = 8192278528 (7812MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (64 entries)
bios0: vendor LENOVO version "8DET72WW (1.42 )" date 02/18/2016
bios0: LENOVO 5491C51
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF!
TCPA SSDT SSDT DMAR UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4)
EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2791.33 MHz
cpu0:
...

On 4/5/2018 6:46 PM, Denis wrote:

> Stefan,
>
> You're right the machine with installed 6.3 is completely different than
> 6.2 currently running.
>
> Here is dmesg of 6.3 machine:
>
> OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 7964327936 (7595MB)
> avail mem = 7715876864 (7358MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe0840 (38 entries)
> bios0: vendor Phoenix Technologies Ltd. version "SBCFP4_3.0.0.312_11
> X64" date 09/21/2014
> bios0: CompuLab fit-PC4
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP HPET APIC MCFG FPDT UEFI POAT BATB SSDT SSDT UEFI
> acpi0: wakeup devices GPP0(S4) GPP1(S4) GPP2(S4) GPP3(S4) GFX_(S4)
> XHC0(S4) OHC1(S4) EHC1(S4) OHC2(S4) EHC2(S4) SBAZ(S4) UAR1(S3)
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpihpet0 at acpi0: 14318180 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD GX-420CA SOC with Radeon(tm) HD Graphics, 1996.49 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXS
> \
> R,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F
> \
> 16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PCTRL3,ITSC,BMI1
>
> cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
> 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> acpihpet0: recalibrated TSC frequency 1996262805 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: AMD GX-420CA SOC with Radeon(tm) HD Graphics, 1996.26 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXS
> \
> R,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F
> \
> 16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PCTRL3,ITSC,BMI1
>
> cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
> 64b/line 16-way L2 cache
> cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: AMD GX-420CA SOC with Radeon(tm) HD Graphics, 1996.26 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXS
> \
> R,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F
> \
> 16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PCTRL3,ITSC,BMI1
>
> cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
> 64b/line 16-way L2 cache
> cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: AMD GX-420CA SOC with Radeon(tm) HD Graphics, 1996.26 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXS
> \
> R,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F
> \
> 16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PCTRL3,ITSC,BMI1
>
> cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
> 64b/line 16-way L2 cache
> cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
> , remapped to apid 4
> ioapic1 at mainbus0: apid 5 pa 0xfec01000, version 21, 32 pins
> , remapped to apid 5
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 2 (GPP0)
> acpiprt2 at acpi0: bus -1 (GPP1)
> acpiprt3 at acpi0: bus 4 (GPP2)
> acpiprt4 at acpi0: bus 5 (GPP3)
> acpiprt5 at acpi0: bus 1 (GFX_)
> acpicpu0 at acpi0: C2(0@400 io@0x841), C1(@1 halt!), PSS
> acpicpu1 at acpi0: C2(0@400 io@0x841), C1(@1 halt!), PSS
> acpicpu2 at acpi0: C2(0@400 io@0x841), C1(@1 halt!), PSS
> acpicpu3 at acpi0: C2(0@400 io@0x841), C1(@1 halt!), PSS
> acpibtn0 at acpi0: PWRB
> "PNP0A05" at acpi0 not configured
> acpivideo0 at acpi0: VGA_
> cpu0: 1996 MHz: speeds: 2000 1800 1600 1200 1000 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Host" rev 0x00
> vga1 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x9831 rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> azalia0 at pci0 dev 1 function 1 "ATI Radeon HD Audio" rev 0x00: msi
> azalia0: no supported codecs
> pchb1 at pci0 dev 2 function 0 vendor "AMD", unknown product 0x1538 rev 0x00
> ppb0 at pci0 dev 2 function 1 "AMD AMD64 16h PCIE" rev 0x00: msi
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi
> pci2 at ppb1 bus 2
> athn0 at pci2 dev 0 function 0 "Atheros AR5418" rev 0x01: apic 5 int 4
> athn0: MAC AR5418 rev 2, RF AR5133 (2T3R), ROM rev 5, address
> xx:xx:xx:xx:xx:xx
> ppb2 at pci0 dev 2 function 4 "AMD AMD64 16h PCIE" rev 0x00: msi
> pci3 at ppb2 bus 4
> em0 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address
> xx:xx:xx:xx:xx:xx
> ppb3 at pci0 dev 2 function 5 "AMD AMD64 16h PCIE" rev 0x00: msi
> pci4 at ppb3 bus 5
> em1 at pci4 dev 0 function 0 "Intel I211" rev 0x03: msi, address
> xx:xx:xx:xx:xx:xx
> xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x01: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev
> 3.00/1.00 addr 1
> ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, ST500, 0001> SCSI3 0/direct fixed
> naa.5000c500ac5b7fb7
> sd0: 476940MB, 512 bytes/sector, 976773168 sectors
> ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x39: apic 4 int
> 18, version 1.0, legacy support
> ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 17
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev
> 2.00/1.00 addr 1
> ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x39: apic 4 int
> 18, version 1.0, legacy support
> ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 17
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev
> 2.00/1.00 addr 1
> piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x3a: polling
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x02: apic
> 4 int 16
> azalia1: codecs: Realtek ALC888
> audio0 at azalia1
> pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
> sdhc0 at pci0 dev 20 function 7 "AMD Bolton SD/MMC" rev 0x01: apic 4 int 16
> sdhc0: SDHC 2.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> pchb2 at pci0 dev 24 function 0 "AMD AMD64 16h Link Cfg" rev 0x00
> pchb3 at pci0 dev 24 function 1 "AMD AMD64 16h Address Map" rev 0x00
> pchb4 at pci0 dev 24 function 2 "AMD AMD64 16h DRAM Cfg" rev 0x00
> km0 at pci0 dev 24 function 3 "AMD AMD64 16h Misc Cfg" rev 0x00
> pchb5 at pci0 dev 24 function 4 "AMD AMD64 16h CPU Power" rev 0x00
> pchb6 at pci0 dev 24 function 5 vendor "AMD", unknown product 0x1535 rev
> 0x00
> usb3 at ohci0: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev
> 1.00/1.00 addr 1
> usb4 at ohci1: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev
> 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: SVM/RVI
> sdmmc0: can't enable card
> axen0 at uhub0 port 1 configuration 1 interface 0 "ASIX Elec. Corp.
> AX88179" rev 3.00/1.00 addr 2
> axen0: AX88179, address xx:xx:xx:xx:xx:xx
> rgephy0 at axen0 phy 3: RTL8169S/8110S/8211 PHY, rev. 5
> uhidev0 at uhub3 port 1 configuration 1 interface 0 "Dell Dell Smart
> Card Reader Keyboard" rev 2.00/1.00 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd0 at ukbd0: console keyboard, using wsdisplay0
> ugen0 at uhub3 port 1 configuration 1 "Dell Dell Smart Card Reader
> Keyboard" rev 2.00/1.00 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> softraid0: sd1 was not shutdown properly
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
> sd1: 476937MB, 512 bytes/sector, 976767473 sectors
> root on sd1a (9990ff6713f15d12.a) swap on sd1b dump on sd1b
> WARNING: / was not properly unmounted
>
> -----------------------------------------
>
> OpenBSD 6.2 (GENERIC.MP) #1: Thu Jan 18 11:09:28 UTC 2018
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8451125248 (8059MB)
> avail mem = 8192278528 (7812MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (64 entries)
> bios0: vendor LENOVO version "8DET72WW (1.42 )" date 02/18/2016
> bios0: LENOVO 5491C51
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF!
> TCPA SSDT SSDT DMAR UEFI UEFI UEFI
> acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4)
> EHC1(S3) EHC2(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2791.33 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI
> \
> ,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3
> \
> ,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
>
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: TSC frequency 2791332320 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2790.93 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI
> \
> ,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3
> \
> ,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
>
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2790.93 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI
> \
> ,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3
> \
> ,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
>
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2790.93 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI
> \
> ,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3
> \
> ,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
>
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 2 (EXP1)
> acpiprt3 at acpi0: bus 3 (EXP2)
> acpiprt4 at acpi0: bus 5 (EXP4)
> acpiprt5 at acpi0: bus 13 (EXP5)
> acpiprt6 at acpi0: bus 14 (EXP7)
> acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
> acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
> acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
> acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS
> acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2
> acpitz0 at acpi0: critical temperature is 99 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> "LEN0020" at acpi0 not configured
> acpibat0 at acpi0: BAT0 model "45N1172" serial 14231 type LION oem "SANYO"
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> "IBM0079" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpidock0 at acpi0: GDCK docked (15)
> acpivideo0 at acpi0: VID_
> acpivout at acpivideo0 not configured
> acpivideo1 at acpi0: VID_
> cpu0: Enhanced SpeedStep 2791 MHz: speeds: 2801, 2800, 2600, 2400, 2200,
> 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> f0:de:f1:d1:9d:19
> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi
> pci2 at ppb1 bus 3
> athn0 at pci2 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 2 int 17
> athn0: AR9280 rev 2 (2T2R), ROM rev 22, address 70:f1:a1:7f:ca:63
> ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi
> pci3 at ppb2 bus 5
> ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi
> pci4 at ppb3 bus 13
> sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
> sdhc0: SDHC 3.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> ppb4 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi
> pci5 at ppb4 bus 14
> xhci0 at pci5 dev 0 function 0 "NEC xHCI" rev 0x04: msi
> usb1 at xhci0: USB revision 3.0
> uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev
> 3.00/1.00 addr 1
> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi,
> AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, ST750LX003, 0002> SCSI3 0/direct fixed
> sd0: 698940MB, 512 bytes/sector, 1356773168 sectors
> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic
> 2 int 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> vmm0 at mainbus0: VMX/EPT
> uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> uhub4 at uhub3 port 1 configuration 1 interface 0 "Standard
> Microsystems" rev 2.00/0.00 addr 3
> run0 at uhub4 port 2 configuration 1 interface 0 "Ralink 3070" rev
> 2.00/1.01 addr 4
> run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address
> xx:xx:xx:xx:xx:xx
> uhub5 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.00 addr 2
> ugen0 at uhub5 port 6 "OMNIKEY" rev 2.00/2.03 addr 3
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> softraid0: sd1 was not shutdown properly
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
>
> ----------------------
>
> Stefan, I can't test 6.3 on the machine which has 6.2 currently
> installed. Will do it a bit later (hope next week).
>
> Thank you for attention to the problem present.
>
> On 4/5/2018 6:09 PM, Stefan Sperling wrote:
>> On Thu, Apr 05, 2018 at 05:30:25PM +0300, Denis wrote:
>>> 1. AR9271 USB stick has been connected to OpenBSD 6.3 amd64
>>> 2. # fw_update
>>> 3. # ls /etc/firmware | grep athn
>>> athn-ar7010
>>> athn-ar7010-11
>>> athn-ar9271
>>> athn-license
>>> athn-open-ar7010
>>> athn-open-ar9271
>>> athn-open-license
>>>
>>> After reconnecting AR9271
>>> athn0: could not load firmware
>>
>> I don't know why the firmware doesn't load for you.
>> It all works fine for me, with both AR9271 devices and AR7010 devices.
>>
>> There is a known issue which looks like this device does not power up
>> properly on some machines, and in some configurations, for example
>> when it is plugged behind a USB 2.0 hub.
>> This results in a failure to load the firmware but it the underlying
>> issue is a different problem which nobody has figured out yet.
>> It could be a bug in our USB stack.
>>
>> However, this is inconsistent with your observation that it worked
>> in 6.2. It sounds like nothing else changed?
>>  
>>> When I remove athn-open-* firmware files from /etc/firmware
>>> athn0: failed loadfirmware of file athn-open-ar9271 (error 2)
>>> athn0: could not load firmware
>>>
>>> In OpenBSD 6.2 amd64 /etc/firmware contains only athn-ar7010,
>>> athn-ar7010-11, and ar9271. The USB stick works with it.
>>
>> Is this 6.2 install on the same machine, or on a different machine?
>> If it's a different machine, could you try 6.3 on the same machine
>> where you tested 6.2?
>>
>>> I think it could be working again if I load non athn-open-* versions of
>>> firmware provided.
>>>
>>> My question is how to load non open version (athn-ar9271) of the athn
>>> firmware to have AR9271 working?
>>
>> You cannot.
>> The driver in 6.3 does not support the old closed source firmware
>> anymore. It only supports the open firmware.
>>
>> It's unfortunate that this change broke it for you, but I cannot
>> explain why. When this change was made about 2 months ago I did
>> not get any negative reports.
>> See https://marc.info/?l=openbsd-tech&m=151769894925027&w=2
>>
>>> athn0: failed error message has a typo 'loadfirmware' without a space.
>>
>> That's intentional. It refers to the function loadfirmware(9):
>> http://man.openbsd.org/loadfirmware
>>
>

Reply | Threaded
Open this post in threaded view
|

Re: AR9271 athn0: could not load firmware on OpenBSD 6.3 amd64

Stefan Sperling-5
On Sun, Apr 15, 2018 at 11:48:53AM +0300, Denis wrote:
> For test I've just updated OpenBSD from 6.2amd64 to 6.3amd64 on Intel
> based machine (shortened dmesg is listed below) and there is no 'athn0:
> could not load firmware' error appears after upgrade. On Intel's
> platform AR9271 works as expected.
>
> On AMD based machine 'athn0: could not load firmware' error is
> permanent. AR9271 does not work completely on AMD GX-420CA SOC. Full
> dmesg of AMD machine fully listed in my previous message.

Thank you for reporting back.
This confirms that you're seeing an already known problem.

We need someone with a solid understanding of the USB spec and
EHCI and/or XHCI to look into this. I don't have time for it.