AR5424 on OpenBSD

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

AR5424 on OpenBSD

Hugo Osvaldo Barrera
I've an Atheros AR5424, which OpenBSD seems to detect correctly, but
does not really work.
The ath driver is used, and the man pages don't list this model as being
supported, but I though I might ask if there was some fix/etc.


# ifconfig ath0 chan
ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:1f:e2:a2:c5:4f
        priority: 4
        groups: wlan
        media: IEEE802.11 autoselect
        status: no network
        ieee80211: nwid ""
                chan  freq      properties
# ifconfig ath0 scan
ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:1f:e2:a2:c5:4f
        priority: 4
        groups: wlan
        media: IEEE802.11 autoselect
        status: no network
        ieee80211: nwid ""
<blue>ath0: unable to reset hardware; hal status 4294934528
#

In reference to the above blue error, the man pages say it should not
happen.  Again, the card is not listed as supported either.

I don't mind providing more feedback/testing patches/etc.
Cheers, and thanks.

dmesg:

OpenBSD 4.8-current (GENERIC.MP) #589: Mon Oct 18 16:29:17 MDT 2010
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2134712320 (2035MB)
avail mem = 2064023552 (1968MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe2c30 (25 entries)
bios0: vendor Hewlett-Packard version "F.33" date 04/29/2008
bios0: Hewlett-Packard Compaq Presario C700 Notebook PC
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC HPET MCFG ASF! SLIC BOOT SSDT
acpi0: wakeup devices SLPB(S4) P32_(S4) EXP1(S4) EXP2(S4) EXP3(S4)
EXP4(S4) EXP5(S4) EXP6(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.28 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu0: 1MB 64b/line 4-way L2 cache
cpu0: apic clock running at 132MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu1: 1MB 64b/line 4-way L2 cache
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 4
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (P32_)
acpiprt2 at acpi0: bus 1 (EXP1)
acpiprt3 at acpi0: bus -1 (EXP2)
acpiprt4 at acpi0: bus -1 (EXP3)
acpiprt5 at acpi0: bus -1 (EXP4)
acpiprt6 at acpi0: bus -1 (EXP5)
acpiprt7 at acpi0: bus -1 (EXP6)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpitz0 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "Primary" type Lion oem "Hewlett-Packard"
acpiac0 at acpi0: AC unit online
acpivideo0 at acpi0: OVGA
cpu0: Enhanced SpeedStep 1729 MHz: speeds: 1733, 1333, 1067, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16 (irq 11)
drm0 at inteldrm0
"Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic
4 int 22 (irq 11)
azalia0: codecs: Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 4 int
18 (irq 11)
pci1 at ppb0 bus 1
ath0 at pci1 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 16
(irq 11)
ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:1f:e2:a2:c5:4f
uhci0 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 4 int
21 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 4 int
20 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 4 int
19 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 4 int
23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci2 at ppb1 bus 2
rl0 at pci2 dev 1 function 0 "Realtek 8139" rev 0x10: apic 4 int 16 (irq
11), address 00:1e:ec:78:5b:13
rlphy0 at rl0 phy 0: RTL internal PHY
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7561A, GH09> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 4
int 17 (irq 10), AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1200BEVS-6, 01.0> SCSI3
0/direct fixed
sd0: 114473MB, 512 bytes/sec, 234441648 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 4
int 19 (irq 11)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 5 configuration 1 interface 0 "Generic USB2.0-CRW"
rev 2.00/51.95 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0
0/direct removable
sd1: drive offline
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Syntek USB2.0 UVC
PC Camera" rev 2.00/11.08 addr 3
video0 at uvideo0
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/2.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z dir
wsmouse1 at ums0 mux 0
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/2.00 addr 2
uhidev1: iclass 3/0, 17 report ids
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
softraid0: sd3 was not shutdown properly
softraid0: sd3 was not shutdown properly
scsibus4 at softraid0: 1 targets
sd2 at scsibus4 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct
fixed
sd2: 111395MB, 512 bytes/sec, 228138538 sec total
softraid0: volume sd2 is roaming, it used to be sd3, updating metadata
ath0: unable to reset hardware; hal status 4294967295
ath0: unable to reset hardware; hal status 4294934528
umass1 at uhub0 port 2 configuration 1 interface 0 "Kingston
DataTraveler 2.0" rev 2.00/1.10 addr 4
umass1: using SCSI over Bulk-Only
scsibus5 at umass1: 2 targets, initiator 0
sd3 at scsibus5 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI0
0/direct removable
sd3: 3824MB, 512 bytes/sec, 7831552 sec total
ath0: unable to reset hardware; hal status 4294934528
umass2 at uhub0 port 3 configuration 1 interface 0 "Sony "PSP" Type A"
rev 2.00/1.00 addr 5
umass2: using ATAPI over Bulk-Only
scsibus6 at umass2: 2 targets, initiator 0
sd4 at scsibus6 targ 1 lun 0: <SONY, "PSP" MS, 1.00> ATAPI 0/direct
removable
sd4: 7632MB, 512 bytes/sec, 15630336 sec total


--
Hugo Osvaldo Barrera

Reply | Threaded
Open this post in threaded view
|

Re: AR5424 on OpenBSD

Abel Abraham Camarillo Ojeda-2
On Sun, Dec 19, 2010 at 2:21 AM, Hugo Osvaldo Barrera
<[hidden email]> wrote:

> I've an Atheros AR5424, which OpenBSD seems to detect correctly, but
> does not really work.
> The ath driver is used, and the man pages don't list this model as being
> supported, but I though I might ask if there was some fix/etc.
>
>
> # ifconfig ath0 chan
> ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
> B  B  B  B lladdr 00:1f:e2:a2:c5:4f
> B  B  B  B priority: 4
> B  B  B  B groups: wlan
> B  B  B  B media: IEEE802.11 autoselect
> B  B  B  B status: no network
> B  B  B  B ieee80211: nwid ""
> B  B  B  B  B  B  B  B chan B freq B  B  B properties
> # ifconfig ath0 scan
> ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
> B  B  B  B lladdr 00:1f:e2:a2:c5:4f
> B  B  B  B priority: 4
> B  B  B  B groups: wlan
> B  B  B  B media: IEEE802.11 autoselect
> B  B  B  B status: no network
> B  B  B  B ieee80211: nwid ""
> <blue>ath0: unable to reset hardware; hal status 4294934528
> #
>
> In reference to the above blue error, the man pages say it should not
> happen. B Again, the card is not listed as supported either.
>
> I don't mind providing more feedback/testing patches/etc.
> Cheers, and thanks.
>
> dmesg:
>
> OpenBSD 4.8-current (GENERIC.MP) #589: Mon Oct 18 16:29:17 MDT 2010
> B  B [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 2134712320 (2035MB)
> avail mem = 2064023552 (1968MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe2c30 (25 entries)
> bios0: vendor Hewlett-Packard version "F.33" date 04/29/2008
> bios0: Hewlett-Packard Compaq Presario C700 Notebook PC
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC HPET MCFG ASF! SLIC BOOT SSDT
> acpi0: wakeup devices SLPB(S4) P32_(S4) EXP1(S4) EXP2(S4) EXP3(S4)
> EXP4(S4) EXP5(S4) EXP6(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.28 MHz
> cpu0:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX1
6,xTPR,PDCM,NXE,LONG
> cpu0: 1MB 64b/line 4-way L2 cache
> cpu0: apic clock running at 132MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.00 MHzI doesn't
work.

http://marc.info/?l=openbsd-misc&m=126420221716157&w=2
> cpu1:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX1
6,xTPR,PDCM,NXE,LONG

> cpu1: 1MB 64b/line 4-way L2 cache
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 4
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 2 (P32_)
> acpiprt2 at acpi0: bus 1 (EXP1)
> acpiprt3 at acpi0: bus -1 (EXP2)
> acpiprt4 at acpi0: bus -1 (EXP3)
> acpiprt5 at acpi0: bus -1 (EXP4)
> acpiprt6 at acpi0: bus -1 (EXP5)
> acpiprt7 at acpi0: bus -1 (EXP6)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpitz0 at acpi0: critical temperature 100 degC
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: LID0
> acpibtn2 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "Primary" type Lion oem "Hewlett-Packard"
> acpiac0 at acpi0: AC unit online
> acpivideo0 at acpi0: OVGA
> cpu0: Enhanced SpeedStep 1729 MHz: speeds: 1733, 1333, 1067, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0x80000000, size 0x10000000
> inteldrm0 at vga1: apic 4 int 16 (irq 11)
> drm0 at inteldrm0
> "Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic
> 4 int 22 (irq 11)
> azalia0: codecs: Conexant CX20561
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 4 int
> 18 (irq 11)
> pci1 at ppb0 bus 1
> ath0 at pci1 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 16
> (irq 11)
> ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:1f:e2:a2:c5:4f
> uhci0 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 4 int
> 21 (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 4 int
> 20 (irq 11)
> uhci2 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 4 int
> 19 (irq 11)
> ehci0 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 4 int
> 23 (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
> pci2 at ppb1 bus 2
> rl0 at pci2 dev 1 function 0 "Realtek 8139" rev 0x10: apic 4 int 16 (irq
> 11), address 00:1e:ec:78:5b:13
> rlphy0 at rl0 phy 0: RTL internal PHY
> pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03
> pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7561A, GH09> ATAPI
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 disabled (no drives)
> ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 4
> int 17 (irq 10), AHCI 1.1
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1200BEVS-6, 01.0> SCSI3
> 0/direct fixed
> sd0: 114473MB, 512 bytes/sec, 234441648 sec total
> ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 4
> int 19 (irq 11)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 5 configuration 1 interface 0 "Generic USB2.0-CRW"
> rev 2.00/51.95 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0
> 0/direct removable
> sd1: drive offline
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "Syntek USB2.0 UVC
> PC Camera" rev 2.00/11.08 addr 3
> video0 at uvideo0
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB
> Receiver" rev 2.00/2.00 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 16 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB
> Receiver" rev 2.00/2.00 addr 2
> uhidev1: iclass 3/0, 17 report ids
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
> uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
> WARNING: / was not properly unmounted
> softraid0: sd3 was not shutdown properly
> softraid0: sd3 was not shutdown properly
> scsibus4 at softraid0: 1 targets
> sd2 at scsibus4 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct
> fixed
> sd2: 111395MB, 512 bytes/sec, 228138538 sec total
> softraid0: volume sd2 is roaming, it used to be sd3, updating metadata
> ath0: unable to reset hardware; hal status 4294967295
> ath0: unable to reset hardware; hal status 4294934528
> umass1 at uhub0 port 2 configuration 1 interface 0 "Kingston
> DataTraveler 2.0" rev 2.00/1.10 addr 4
> umass1: using SCSI over Bulk-Only
> scsibus5 at umass1: 2 targets, initiator 0
> sd3 at scsibus5 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI0
> 0/direct removable
> sd3: 3824MB, 512 bytes/sec, 7831552 sec total
> ath0: unable to reset hardware; hal status 4294934528
> umass2 at uhub0 port 3 configuration 1 interface 0 "Sony "PSP" Type A"
> rev 2.00/1.00 addr 5
> umass2: using ATAPI over Bulk-Only
> scsibus6 at umass2: 2 targets, initiator 0
> sd4 at scsibus6 targ 1 lun 0: <SONY, "PSP" MS, 1.00> ATAPI 0/direct
> removable
> sd4: 7632MB, 512 bytes/sec, 15630336 sec total
>
>
> --
> Hugo Osvaldo Barrera
>
>

I doesn't work.

http://marc.info/?l=openbsd-misc&m=126420221716157&w=2

Reply | Threaded
Open this post in threaded view
|

Re: AR5424 on OpenBSD

Hugo Osvaldo Barrera
On Sun, 2010-12-19 at 02:36 -0600, Abel Abraham Camarillo Ojeda wrote:

> On Sun, Dec 19, 2010 at 2:21 AM, Hugo Osvaldo Barrera
> <[hidden email]> wrote:
> > I've an Atheros AR5424, which OpenBSD seems to detect correctly, but
> > does not really work.
> > The ath driver is used, and the man pages don't list this model as being
> > supported, but I though I might ask if there was some fix/etc.
> >
> >
> > # ifconfig ath0 chan
> > ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
> >        lladdr 00:1f:e2:a2:c5:4f
> >        priority: 4
> >        groups: wlan
> >        media: IEEE802.11 autoselect
> >        status: no network
> >        ieee80211: nwid ""
> >                chan  freq      properties
> > # ifconfig ath0 scan
> > ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
> >        lladdr 00:1f:e2:a2:c5:4f
> >        priority: 4
> >        groups: wlan
> >        media: IEEE802.11 autoselect
> >        status: no network
> >        ieee80211: nwid ""
> > <blue>ath0: unable to reset hardware; hal status 4294934528
> > #
> >
> > In reference to the above blue error, the man pages say it should not
> > happen.  Again, the card is not listed as supported either.
> >
> > I don't mind providing more feedback/testing patches/etc.
> > Cheers, and thanks.
> >
> > dmesg:
> >
> > OpenBSD 4.8-current (GENERIC.MP) #589: Mon Oct 18 16:29:17 MDT 2010
> >    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 2134712320 (2035MB)
> > avail mem = 2064023552 (1968MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe2c30 (25 entries)
> > bios0: vendor Hewlett-Packard version "F.33" date 04/29/2008
> > bios0: Hewlett-Packard Compaq Presario C700 Notebook PC
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP APIC HPET MCFG ASF! SLIC BOOT SSDT
> > acpi0: wakeup devices SLPB(S4) P32_(S4) EXP1(S4) EXP2(S4) EXP3(S4)
> > EXP4(S4) EXP5(S4) EXP6(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.28 MHz
> > cpu0:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
> > cpu0: 1MB 64b/line 4-way L2 cache
> > cpu0: apic clock running at 132MHz
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.00 MHzI doesn't work.
>
> http://marc.info/?l=openbsd-misc&m=126420221716157&w=2
> > cpu1:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
> > cpu1: 1MB 64b/line 4-way L2 cache
> > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> > ioapic0: misconfigured as apic 0, remapped to apid 4
> > acpihpet0 at acpi0: 14318179 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus 2 (P32_)
> > acpiprt2 at acpi0: bus 1 (EXP1)
> > acpiprt3 at acpi0: bus -1 (EXP2)
> > acpiprt4 at acpi0: bus -1 (EXP3)
> > acpiprt5 at acpi0: bus -1 (EXP4)
> > acpiprt6 at acpi0: bus -1 (EXP5)
> > acpiprt7 at acpi0: bus -1 (EXP6)
> > acpiec0 at acpi0
> > acpicpu0 at acpi0: C3, C2, C1, PSS
> > acpicpu1 at acpi0: C3, C2, C1, PSS
> > acpitz0 at acpi0: critical temperature 100 degC
> > acpibtn0 at acpi0: PWRB
> > acpibtn1 at acpi0: LID0
> > acpibtn2 at acpi0: SLPB
> > acpibat0 at acpi0: BAT0 model "Primary" type Lion oem "Hewlett-Packard"
> > acpiac0 at acpi0: AC unit online
> > acpivideo0 at acpi0: OVGA
> > cpu0: Enhanced SpeedStep 1729 MHz: speeds: 1733, 1333, 1067, 800 MHz
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03
> > vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > intagp0 at vga1
> > agp0 at intagp0: aperture at 0x80000000, size 0x10000000
> > inteldrm0 at vga1: apic 4 int 16 (irq 11)
> > drm0 at inteldrm0
> > "Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured
> > azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic
> > 4 int 22 (irq 11)
> > azalia0: codecs: Conexant CX20561
> > audio0 at azalia0
> > ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 4 int
> > 18 (irq 11)
> > pci1 at ppb0 bus 1
> > ath0 at pci1 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 16
> > (irq 11)
> > ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:1f:e2:a2:c5:4f
> > uhci0 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 4 int
> > 21 (irq 11)
> > uhci1 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 4 int
> > 20 (irq 11)
> > uhci2 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 4 int
> > 19 (irq 11)
> > ehci0 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 4 int
> > 23 (irq 11)
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
> > pci2 at ppb1 bus 2
> > rl0 at pci2 dev 1 function 0 "Realtek 8139" rev 0x10: apic 4 int 16 (irq
> > 11), address 00:1e:ec:78:5b:13
> > rlphy0 at rl0 phy 0: RTL internal PHY
> > pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03
> > pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
> > channel 0 configured to compatibility, channel 1 configured to
> > compatibility
> > atapiscsi0 at pciide0 channel 0 drive 0
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7561A, GH09> ATAPI
> > 5/cdrom removable
> > cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> > pciide0: channel 1 disabled (no drives)
> > ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 4
> > int 17 (irq 10), AHCI 1.1
> > scsibus1 at ahci0: 32 targets
> > sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1200BEVS-6, 01.0> SCSI3
> > 0/direct fixed
> > sd0: 114473MB, 512 bytes/sec, 234441648 sec total
> > ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 4
> > int 19 (irq 11)
> > iic0 at ichiic0
> > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> > spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
> > usb1 at uhci0: USB revision 1.0
> > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb2 at uhci1: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci2: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > mtrr: Pentium Pro MTRR support
> > umass0 at uhub0 port 5 configuration 1 interface 0 "Generic USB2.0-CRW"
> > rev 2.00/51.95 addr 2
> > umass0: using SCSI over Bulk-Only
> > scsibus2 at umass0: 2 targets, initiator 0
> > sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0
> > 0/direct removable
> > sd1: drive offline
> > uvideo0 at uhub0 port 6 configuration 1 interface 0 "Syntek USB2.0 UVC
> > PC Camera" rev 2.00/11.08 addr 3
> > video0 at uvideo0
> > uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB
> > Receiver" rev 2.00/2.00 addr 2
> > uhidev0: iclass 3/1
> > ums0 at uhidev0: 16 buttons, Z dir
> > wsmouse1 at ums0 mux 0
> > uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB
> > Receiver" rev 2.00/2.00 addr 2
> > uhidev1: iclass 3/0, 17 report ids
> > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> > uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
> > uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
> > vscsi0 at root
> > scsibus3 at vscsi0: 256 targets
> > softraid0 at root
> > root on sd0a swap on sd0b dump on sd0b
> > WARNING: / was not properly unmounted
> > softraid0: sd3 was not shutdown properly
> > softraid0: sd3 was not shutdown properly
> > scsibus4 at softraid0: 1 targets
> > sd2 at scsibus4 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct
> > fixed
> > sd2: 111395MB, 512 bytes/sec, 228138538 sec total
> > softraid0: volume sd2 is roaming, it used to be sd3, updating metadata
> > ath0: unable to reset hardware; hal status 4294967295
> > ath0: unable to reset hardware; hal status 4294934528
> > umass1 at uhub0 port 2 configuration 1 interface 0 "Kingston
> > DataTraveler 2.0" rev 2.00/1.10 addr 4
> > umass1: using SCSI over Bulk-Only
> > scsibus5 at umass1: 2 targets, initiator 0
> > sd3 at scsibus5 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI0
> > 0/direct removable
> > sd3: 3824MB, 512 bytes/sec, 7831552 sec total
> > ath0: unable to reset hardware; hal status 4294934528
> > umass2 at uhub0 port 3 configuration 1 interface 0 "Sony "PSP" Type A"
> > rev 2.00/1.00 addr 5
> > umass2: using ATAPI over Bulk-Only
> > scsibus6 at umass2: 2 targets, initiator 0
> > sd4 at scsibus6 targ 1 lun 0: <SONY, "PSP" MS, 1.00> ATAPI 0/direct
> > removable
> > sd4: 7632MB, 512 bytes/sec, 15630336 sec total
> >
> >
> > --
> > Hugo Osvaldo Barrera
> >
> >
>
> I doesn't work.
>
> http://marc.info/?l=openbsd-misc&m=126420221716157&w=2

Ok, thanks, I somehow failed to google this earlier.  It's a shame I'm
far from being skilled enough to do anything about it.  :-(


--
Hugo Osvaldo Barrera

Reply | Threaded
Open this post in threaded view
|

Re: AR5424 on OpenBSD

Paolo Aglialoro
I also had that chipset on an acer aspire one....
Just gor a mini pcie card to substitute it ;))))


Ok, thanks, I somehow failed to google this earlier.  It's a shame I'm
> far from being skilled enough to do anything about it.  :-(
>
>
> --
> Hugo Osvaldo Barrera

Reply | Threaded
Open this post in threaded view
|

Re: AR5424 on OpenBSD

Neal Hogan
In reply to this post by Hugo Osvaldo Barrera
On Sun, Dec 19, 2010 at 2:21 AM, Hugo Osvaldo Barrera
<[hidden email]> wrote:

> I've an Atheros AR5424, which OpenBSD seems to detect correctly, but
> does not really work.
> The ath driver is used, and the man pages don't list this model as being
> supported, but I though I might ask if there was some fix/etc.
>
>
> # ifconfig ath0 chan
> ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
>        lladdr 00:1f:e2:a2:c5:4f
>        priority: 4
>        groups: wlan
>        media: IEEE802.11 autoselect
>        status: no network
>        ieee80211: nwid ""
>                chan  freq      properties
> # ifconfig ath0 scan
> ath0: flags=8822<BROADCAST,NOTRAILERS,SIMPLEX,MULTICAST> mtu 1500
>        lladdr 00:1f:e2:a2:c5:4f
>        priority: 4
>        groups: wlan
>        media: IEEE802.11 autoselect
>        status: no network
>        ieee80211: nwid ""
> <blue>ath0: unable to reset hardware; hal status 4294934528
> #
>
> In reference to the above blue error, the man pages say it should not
> happen.  Again, the card is not listed as supported either.
>
> I don't mind providing more feedback/testing patches/etc.
> Cheers, and thanks.

Check the archives of tech@ (and misc@ for that matter). The AR5424
issue has been known and some have been working on a driver. However,
the discussion has weakened recently :-(

>
> dmesg:
>
> OpenBSD 4.8-current (GENERIC.MP) #589: Mon Oct 18 16:29:17 MDT 2010
>    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 2134712320 (2035MB)
> avail mem = 2064023552 (1968MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe2c30 (25 entries)
> bios0: vendor Hewlett-Packard version "F.33" date 04/29/2008
> bios0: Hewlett-Packard Compaq Presario C700 Notebook PC
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC HPET MCFG ASF! SLIC BOOT SSDT
> acpi0: wakeup devices SLPB(S4) P32_(S4) EXP1(S4) EXP2(S4) EXP3(S4)
> EXP4(S4) EXP5(S4) EXP6(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.28 MHz
> cpu0:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX1
6,xTPR,PDCM,NXE,LONG
> cpu0: 1MB 64b/line 4-way L2 cache
> cpu0: apic clock running at 132MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Pentium(R) Dual CPU T2370 @ 1.73GHz, 1729.00 MHz
> cpu1:
>
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX1
6,xTPR,PDCM,NXE,LONG

> cpu1: 1MB 64b/line 4-way L2 cache
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 4
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 2 (P32_)
> acpiprt2 at acpi0: bus 1 (EXP1)
> acpiprt3 at acpi0: bus -1 (EXP2)
> acpiprt4 at acpi0: bus -1 (EXP3)
> acpiprt5 at acpi0: bus -1 (EXP4)
> acpiprt6 at acpi0: bus -1 (EXP5)
> acpiprt7 at acpi0: bus -1 (EXP6)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpitz0 at acpi0: critical temperature 100 degC
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: LID0
> acpibtn2 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "Primary" type Lion oem "Hewlett-Packard"
> acpiac0 at acpi0: AC unit online
> acpivideo0 at acpi0: OVGA
> cpu0: Enhanced SpeedStep 1729 MHz: speeds: 1733, 1333, 1067, 800 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0x80000000, size 0x10000000
> inteldrm0 at vga1: apic 4 int 16 (irq 11)
> drm0 at inteldrm0
> "Intel GM965 Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic
> 4 int 22 (irq 11)
> azalia0: codecs: Conexant CX20561
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 4 int
> 18 (irq 11)
> pci1 at ppb0 bus 1
> ath0 at pci1 dev 0 function 0 "Atheros AR5424" rev 0x01: apic 4 int 16
> (irq 11)
> ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:1f:e2:a2:c5:4f
> uhci0 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 4 int
> 21 (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 4 int
> 20 (irq 11)
> uhci2 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 4 int
> 19 (irq 11)
> ehci0 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 4 int
> 23 (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
> pci2 at ppb1 bus 2
> rl0 at pci2 dev 1 function 0 "Realtek 8139" rev 0x10: apic 4 int 16 (irq
> 11), address 00:1e:ec:78:5b:13
> rlphy0 at rl0 phy 0: RTL internal PHY
> pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x03
> pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7561A, GH09> ATAPI
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
> pciide0: channel 1 disabled (no drives)
> ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 4
> int 17 (irq 10), AHCI 1.1
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD1200BEVS-6, 01.0> SCSI3
> 0/direct fixed
> sd0: 114473MB, 512 bytes/sec, 234441648 sec total
> ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 4
> int 19 (irq 11)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
> spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 5 configuration 1 interface 0 "Generic USB2.0-CRW"
> rev 2.00/51.95 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0
> 0/direct removable
> sd1: drive offline
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "Syntek USB2.0 UVC
> PC Camera" rev 2.00/11.08 addr 3
> video0 at uvideo0
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Logitech USB
> Receiver" rev 2.00/2.00 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 16 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Logitech USB
> Receiver" rev 2.00/2.00 addr 2
> uhidev1: iclass 3/0, 17 report ids
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 16: input=6, output=6, feature=0
> uhid2 at uhidev1 reportid 17: input=19, output=19, feature=0
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
> WARNING: / was not properly unmounted
> softraid0: sd3 was not shutdown properly
> softraid0: sd3 was not shutdown properly
> scsibus4 at softraid0: 1 targets
> sd2 at scsibus4 targ 0 lun 0: <OPENBSD, SR CRYPTO, 004> SCSI2 0/direct
> fixed
> sd2: 111395MB, 512 bytes/sec, 228138538 sec total
> softraid0: volume sd2 is roaming, it used to be sd3, updating metadata
> ath0: unable to reset hardware; hal status 4294967295
> ath0: unable to reset hardware; hal status 4294934528
> umass1 at uhub0 port 2 configuration 1 interface 0 "Kingston
> DataTraveler 2.0" rev 2.00/1.10 addr 4
> umass1: using SCSI over Bulk-Only
> scsibus5 at umass1: 2 targets, initiator 0
> sd3 at scsibus5 targ 1 lun 0: <Kingston, DataTraveler 2.0, PMAP> SCSI0
> 0/direct removable
> sd3: 3824MB, 512 bytes/sec, 7831552 sec total
> ath0: unable to reset hardware; hal status 4294934528
> umass2 at uhub0 port 3 configuration 1 interface 0 "Sony "PSP" Type A"
> rev 2.00/1.00 addr 5
> umass2: using ATAPI over Bulk-Only
> scsibus6 at umass2: 2 targets, initiator 0
> sd4 at scsibus6 targ 1 lun 0: <SONY, "PSP" MS, 1.00> ATAPI 0/direct
> removable
> sd4: 7632MB, 512 bytes/sec, 15630336 sec total
>
>
> --
> Hugo Osvaldo Barrera