ALIX CF card

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

ALIX CF card

Frank Bax
I installed 4.7 to a CF card via usb connector on HP D530.  I then
inserted CF card into a new ALIX system with serial console.

Boot process hangs with both bsd.sp and bsd.rd (see below).

What is my next step in determining the problem here?


PC Engines ALIX.2 v0.99h
640 KB Base Memory
261120 KB Extended Memory

01F0 Master 044A ULTIMATE  CF CARD 16GB
Phys C/H/S 16383/16/63 Log C/H/S 1856/255/63 LBA
Using drive 0, partition 3.
Loading...
probing: pc0 com0 com1 pci mem[640K 255M a20=on]
disk: hd0+
 >> >> OpenBSD/i386 BOOT 3.02
boot> boot bsd.rd
booting hd0a:bsd.rd: 5864788+916112 [52+221040+208132]=0x6e0600
entry point at 0x200120

Reply | Threaded
Open this post in threaded view
|

Re: ALIX CF card

Sergey Bronnikov
it is not a hang.
Just disabled output to serial console.

You should add lines:
        set tty com0
        stty com0 57600
to /etc/boot.conf

On 07:31 Thu 18 Nov , Frank Bax wrote:

> I installed 4.7 to a CF card via usb connector on HP D530.  I then
> inserted CF card into a new ALIX system with serial console.
>
> Boot process hangs with both bsd.sp and bsd.rd (see below).
>
> What is my next step in determining the problem here?
>
>
> PC Engines ALIX.2 v0.99h
> 640 KB Base Memory
> 261120 KB Extended Memory
>
> 01F0 Master 044A ULTIMATE  CF CARD 16GB
> Phys C/H/S 16383/16/63 Log C/H/S 1856/255/63 LBA
> Using drive 0, partition 3.
> Loading...
> probing: pc0 com0 com1 pci mem[640K 255M a20=on]
> disk: hd0+
> >> >> OpenBSD/i386 BOOT 3.02
> boot> boot bsd.rd
> booting hd0a:bsd.rd: 5864788+916112 [52+221040+208132]=0x6e0600
> entry point at 0x200120
>

--
sergeyb@

Reply | Threaded
Open this post in threaded view
|

Re: ALIX CF card

Sergey Bronnikov
http://tothelasttribe.com/blog/2009/04/building-a-firewall-pfsense-on-an-alix-2d3/
http://blog.innerewut.de/2005/05/14/openbsd-3-7-on-wrap

On 16:24 Thu 18 Nov , Sergey Bronnikov wrote:

> it is not a hang.
> Just disabled output to serial console.
>
> You should add lines:
> set tty com0
> stty com0 57600
> to /etc/boot.conf
>
> On 07:31 Thu 18 Nov , Frank Bax wrote:
> > I installed 4.7 to a CF card via usb connector on HP D530.  I then
> > inserted CF card into a new ALIX system with serial console.
> >
> > Boot process hangs with both bsd.sp and bsd.rd (see below).
> >
> > What is my next step in determining the problem here?
> >
> >
> > PC Engines ALIX.2 v0.99h
> > 640 KB Base Memory
> > 261120 KB Extended Memory
> >
> > 01F0 Master 044A ULTIMATE  CF CARD 16GB
> > Phys C/H/S 16383/16/63 Log C/H/S 1856/255/63 LBA
> > Using drive 0, partition 3.
> > Loading...
> > probing: pc0 com0 com1 pci mem[640K 255M a20=on]
> > disk: hd0+
> > >> >> OpenBSD/i386 BOOT 3.02
> > boot> boot bsd.rd
> > booting hd0a:bsd.rd: 5864788+916112 [52+221040+208132]=0x6e0600
> > entry point at 0x200120
> >
>
> --
> sergeyb@

--
sergeyb@

Reply | Threaded
Open this post in threaded view
|

Re: ALIX CF card

Gonzalo L. Rodriguez
In reply to this post by Frank Bax
What is your serial setup? you user cu(1)?

On 11/18/10 09:31, Frank Bax wrote:

> I installed 4.7 to a CF card via usb connector on HP D530.  I then
> inserted CF card into a new ALIX system with serial console.
>
> Boot process hangs with both bsd.sp and bsd.rd (see below).
>
> What is my next step in determining the problem here?
>
>
> PC Engines ALIX.2 v0.99h
> 640 KB Base Memory
> 261120 KB Extended Memory
>
> 01F0 Master 044A ULTIMATE  CF CARD 16GB
> Phys C/H/S 16383/16/63 Log C/H/S 1856/255/63 LBA
> Using drive 0, partition 3.
> Loading...
> probing: pc0 com0 com1 pci mem[640K 255M a20=on]
> disk: hd0+
>>> >> OpenBSD/i386 BOOT 3.02
> boot> boot bsd.rd
> booting hd0a:bsd.rd: 5864788+916112 [52+221040+208132]=0x6e0600
> entry point at 0x200120
>

--
Sending from my Computer.

Reply | Threaded
Open this post in threaded view
|

Re: ALIX CF card

Frank Bax
In reply to this post by Sergey Bronnikov
Thanks.  I've done this on another system; but forgot this time.

Also need to change /etc/ttys if login via serial console is desired.


On 11/18/10 08:24, Sergey Bronnikov wrote:

> it is not a hang.
> Just disabled output to serial console.
>
> You should add lines:
> set tty com0
> stty com0 57600
> to /etc/boot.conf
>
> On 07:31 Thu 18 Nov , Frank Bax wrote:
>> I installed 4.7 to a CF card via usb connector on HP D530.  I then
>> inserted CF card into a new ALIX system with serial console.
>>
>> Boot process hangs with both bsd.sp and bsd.rd (see below).
>>
>> What is my next step in determining the problem here?
>>
>>
>> PC Engines ALIX.2 v0.99h
>> 640 KB Base Memory
>> 261120 KB Extended Memory
>>
>> 01F0 Master 044A ULTIMATE  CF CARD 16GB
>> Phys C/H/S 16383/16/63 Log C/H/S 1856/255/63 LBA
>> Using drive 0, partition 3.
>> Loading...
>> probing: pc0 com0 com1 pci mem[640K 255M a20=on]
>> disk: hd0+
>>>>>> OpenBSD/i386 BOOT 3.02
>> boot>  boot bsd.rd
>> booting hd0a:bsd.rd: 5864788+916112 [52+221040+208132]=0x6e0600
>> entry point at 0x200120

Reply | Threaded
Open this post in threaded view
|

Re: ALIX CF card

Stuart Henderson
On 2010-11-20, Frank Bax <[hidden email]> wrote:
> Thanks.  I've done this on another system; but forgot this time.
>
> Also need to change /etc/ttys if login via serial console is desired.

This is one of the reasons it's often simpler to use pxeboot(8) so you
can install straight on the machine; the installer asks you if you'd like
the console to be on the serial port, and sets everything up for you.