6.7 boot crashes on "entry point at" X1 Carbon gen7 i7-10510U

classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|

6.7 boot crashes on "entry point at" X1 Carbon gen7 i7-10510U

John Mettraux
Hello,

I tried to upgrade my Lenovo X1 Carbon 7th generation i7-10510U
from 6.6 to 6.7.

The last reboot freezes at "entry point at 0x1001000".

I tried to do a pure install, but booting from the USB stick leads immediately
to the "entry point at 0x1001000" freeze.

I found various past threads here or on Reddit for "entry point at 0x..."
but none yield anything useful.

I attach the 6.6 dmesg, I fetched it after re-installing 6.6.


Thanks a lot,

John

yawara_6.6_dmesg_1.txt (55K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: 6.7 boot crashes on "entry point at" X1 Carbon gen7 i7-10510U

Joseph Borg
happened to me twice. Doing a hard power down worked for me but this is anecdotal.

regards

> On 23 May 2020, at 12:54, John Mettraux <[hidden email]> wrote:
>
> Hello,
>
> I tried to upgrade my Lenovo X1 Carbon 7th generation i7-10510U
> from 6.6 to 6.7.
>
> The last reboot freezes at "entry point at 0x1001000".
>
> I tried to do a pure install, but booting from the USB stick leads immediately
> to the "entry point at 0x1001000" freeze.
>
> I found various past threads here or on Reddit for "entry point at 0x..."
> but none yield anything useful.
>
> I attach the 6.6 dmesg, I fetched it after re-installing 6.6.
>
>
> Thanks a lot,
>
> John
> <yawara_6.6_dmesg_1.txt>

Reply | Threaded
Open this post in threaded view
|

Re: 6.7 boot crashes on "entry point at" X1 Carbon gen7 i7-10510U

John Mettraux
> > On 23 May 2020, at 12:54, John Mettraux <[hidden email]> wrote:
> >
> > I tried to upgrade my Lenovo X1 Carbon 7th generation i7-10510U
> > from 6.6 to 6.7.
> >
> > The last reboot freezes at "entry point at 0x1001000".
> >
> > I tried to do a pure install, but booting from the USB stick leads immediately
> > to the "entry point at 0x1001000" freeze.
> >
> > I found various past threads here or on Reddit for "entry point at 0x..."
> > but none yield anything useful.
> >
> > I attach the 6.6 dmesg, I fetched it after re-installing 6.6.

On Sat, May 23, 2020 at 8:50 PM Joseph A Borg <[hidden email]> wrote:
>
> happened to me twice. Doing a hard power down worked for me but this is anecdotal.

Hard power down is the only way out, but rebooting still leads
immediately to the
"entry point at 0x1001000" wall. It is consistent. I tried boot -c,
boot -d or boot -s,
still the same wall.

I have just tried with the install67.img snapshot (22-May-2020 21:12
476545024) from
https://ftp.openbsd.org/pub/OpenBSD/snapshots/amd64/ but it leads to the same
"entry point at 0x1001000" right after boot.

Best regards,

John

Reply | Threaded
Open this post in threaded view
|

Re: 6.7 boot crashes on "entry point at" X1 Carbon gen7 i7-10510U

Stuart Henderson
On 2020-05-23, John Mettraux <[hidden email]> wrote:

>> > On 23 May 2020, at 12:54, John Mettraux <[hidden email]> wrote:
>> >
>> > I tried to upgrade my Lenovo X1 Carbon 7th generation i7-10510U
>> > from 6.6 to 6.7.
>> >
>> > The last reboot freezes at "entry point at 0x1001000".
>> >
>> > I tried to do a pure install, but booting from the USB stick leads immediately
>> > to the "entry point at 0x1001000" freeze.
>> >
>> > I found various past threads here or on Reddit for "entry point at 0x..."
>> > but none yield anything useful.
>> >
>> > I attach the 6.6 dmesg, I fetched it after re-installing 6.6.
>
> On Sat, May 23, 2020 at 8:50 PM Joseph A Borg <[hidden email]> wrote:
>>
>> happened to me twice. Doing a hard power down worked for me but this is anecdotal.
>
> Hard power down is the only way out, but rebooting still leads
> immediately to the
> "entry point at 0x1001000" wall. It is consistent. I tried boot -c,
> boot -d or boot -s,
> still the same wall.
>
> I have just tried with the install67.img snapshot (22-May-2020 21:12
> 476545024) from
> https://ftp.openbsd.org/pub/OpenBSD/snapshots/amd64/ but it leads to the same
> "entry point at 0x1001000" right after boot.

Try downloading a 6.7 kernel (bsd.mp) to e.g. /bsd.test, and from the 6.6 boot
loader type "b /bsd.test". Do you still get the hang? This will give you an idea
whether the problem in 6.7 is with the newer boot loader or the kernel.


Reply | Threaded
Open this post in threaded view
|

Re: 6.7 boot crashes on "entry point at" X1 Carbon gen7 i7-10510U

John Mettraux
On Sun, May 24, 2020 at 5:36 PM Stuart Henderson <[hidden email]> wrote:

>
> On 2020-05-23, John Mettraux <[hidden email]> wrote:
> >
> > (...)
> >
> > Hard power down is the only way out, but rebooting still leads
> > immediately to the
> > "entry point at 0x1001000" wall. It is consistent. I tried boot -c,
> > boot -d or boot -s,
> > still the same wall.
> >
> > I have just tried with the install67.img snapshot (22-May-2020 21:12
> > 476545024) from
> > https://ftp.openbsd.org/pub/OpenBSD/snapshots/amd64/ but it leads to the same
> > "entry point at 0x1001000" right after boot.
>
> Try downloading a 6.7 kernel (bsd.mp) to e.g. /bsd.test, and from the 6.6 boot
> loader type "b /bsd.test". Do you still get the hang? This will give you an idea
> whether the problem in 6.7 is with the newer boot loader or the kernel.

Hello,

I can confirm that the hang doesn't happen with the 6.7 kernel and the 6.6 boot
loader (bootx64 3.46). The hang happens with the 6.7 boot loader (3.50).

I will try to do a 6.7 install with the 3.46 boot loader.

Thanks a lot!

John

Reply | Threaded
Open this post in threaded view
|

Re: 6.7 boot crashes on "entry point at" X1 Carbon gen7 i7-10510U

Otto Moerbeek
On Sun, May 24, 2020 at 08:26:43PM +0900, John Mettraux wrote:

> On Sun, May 24, 2020 at 5:36 PM Stuart Henderson <[hidden email]> wrote:
> >
> > On 2020-05-23, John Mettraux <[hidden email]> wrote:
> > >
> > > (...)
> > >
> > > Hard power down is the only way out, but rebooting still leads
> > > immediately to the
> > > "entry point at 0x1001000" wall. It is consistent. I tried boot -c,
> > > boot -d or boot -s,
> > > still the same wall.
> > >
> > > I have just tried with the install67.img snapshot (22-May-2020 21:12
> > > 476545024) from
> > > https://ftp.openbsd.org/pub/OpenBSD/snapshots/amd64/ but it leads to the same
> > > "entry point at 0x1001000" right after boot.
> >
> > Try downloading a 6.7 kernel (bsd.mp) to e.g. /bsd.test, and from the 6.6 boot
> > loader type "b /bsd.test". Do you still get the hang? This will give you an idea
> > whether the problem in 6.7 is with the newer boot loader or the kernel.
>
> Hello,
>
> I can confirm that the hang doesn't happen with the 6.7 kernel and the 6.6 boot
> loader (bootx64 3.46). The hang happens with the 6.7 boot loader (3.50).
>
> I will try to do a 6.7 install with the 3.46 boot loader.
>
> Thanks a lot!
>
> John
>

Can you also try using legacy boot mode (mbr)? THere should be some
setting in the bios to enable that.

        -Otto

Reply | Threaded
Open this post in threaded view
|

Re: 6.7 boot crashes on "entry point at" X1 Carbon gen7 i7-10510U

John Mettraux
On Sun, May 24, 2020 at 8:38 PM Otto Moerbeek <[hidden email]> wrote:

>
> On Sun, May 24, 2020 at 08:26:43PM +0900, John Mettraux wrote:
>
> > On Sun, May 24, 2020 at 5:36 PM Stuart Henderson <[hidden email]> wrote:
> > >
> > > On 2020-05-23, John Mettraux <[hidden email]> wrote:
> > > >
> > > > (...)
> > > >
> > > > Hard power down is the only way out, but rebooting still leads
> > > > immediately to the
> > > > "entry point at 0x1001000" wall. It is consistent. I tried boot -c,
> > > > boot -d or boot -s,
> > > > still the same wall.
> > > >
> > > > I have just tried with the install67.img snapshot (22-May-2020 21:12
> > > > 476545024) from
> > > > https://ftp.openbsd.org/pub/OpenBSD/snapshots/amd64/ but it leads to the same
> > > > "entry point at 0x1001000" right after boot.
> > >
> > > Try downloading a 6.7 kernel (bsd.mp) to e.g. /bsd.test, and from the 6.6 boot
> > > loader type "b /bsd.test". Do you still get the hang? This will give you an idea
> > > whether the problem in 6.7 is with the newer boot loader or the kernel.
> >
> > I can confirm that the hang doesn't happen with the 6.7 kernel and the 6.6 boot
> > loader (bootx64 3.46). The hang happens with the 6.7 boot loader (3.50).
> >
> > I will try to do a 6.7 install with the 3.46 boot loader.
>
> Can you also try using legacy boot mode (mbr)? There should be some
> setting in the bios to enable that.
>
>         -Otto

I tried to set the boot mode to [Legacy First] and [Legacy Only]. In
both cases the Boot 3.47 kicked in
and allowed me to install.

I performed the install on the machine drive (sd0) with MBR and the
install was successful.
Dmesg below for the resulting 6.7 Snapshot.

I tried to install on sd0 with GPT. The install warned me "An EFI/GPT
disk may not boot. Proceed?"
I answered yes. The install proceeded but upon reboot it froze with
the "entry point at 0x1001000".
This was with bootx64 3.50.

I am going to re-install with sd0 MBR.

Thanks a lot!

John

---dmesg---

OpenBSD 6.7-current (RAMDISK_CD) #204: Fri May 22 20:38:04 MDT 2020
    [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 16197828608 (15447MB)
avail mem = 15702892544 (14975MB)
random: good seed from bootblocks
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x6cc77000 (65 entries)
bios0: vendor LENOVO version "N2QET18W (1.12 )" date 12/10/2019
bios0: LENOVO 20R1CTO1WW
acpi0 at bios0: ACPI 6.1
acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT SSDT TPM2 SSDT HPET APIC
MCFG ECDT SSDT SSDT SSDT NHLT BOOT SSDT LPIT WSMT SSDT DBGP DBG2 MSDM
BATB DMAR UEFI FPDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 7498.82 MHz, 06-8e-0c
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus 3 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus 5 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpicpu at acpi0 not configured
acpitz at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"LEN0268" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"PNP0C60" at acpi0 not configured
"LEN0111" at acpi0 not configured
"LEN0100" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT34BB" at acpi0 not configured
"SYNA8004" at acpi0 not configured
"ACPI000E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT0E0C" at acpi0 not configured
"PNP0C0E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT3400" at acpi0 not configured
"STM7308" at acpi0 not configured
"USBC000" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x9b61 rev 0x0c
vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x9b41 rev 0x02
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Core 6G Thermal" rev 0x0c at pci0 dev 4 function 0 not configured
"Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
vendor "Intel", unknown product 0x02f9 (class DASP subclass
miscellaneous, rev 0x00) at pci0 dev 18 function 0 not configured
xhci0 at pci0 dev 20 function 0 vendor "Intel", unknown product 0x02ed
rev 0x00: msi, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
vendor "Intel", unknown product 0x02ef (class memory subclass RAM, rev
0x00) at pci0 dev 20 function 2 not configured
vendor "Intel", unknown product 0x02f0 (class network subclass
miscellaneous, rev 0x00) at pci0 dev 20 function 3 not configured
vendor "Intel", unknown product 0x02e8 (class serial bus unknown
subclass 0x80, rev 0x00) at pci0 dev 21 function 0 not configured
vendor "Intel", unknown product 0x02e9 (class serial bus unknown
subclass 0x80, rev 0x00) at pci0 dev 21 function 1 not configured
vendor "Intel", unknown product 0x02e0 (class communications subclass
miscellaneous, rev 0x00) at pci0 dev 22 function 0 not configured
ppb0 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x02b0
rev 0xf0: msi
pci1 at ppb0 bus 3
nvme0 at pci1 dev 0 function 0 vendor "Toshiba", unknown product
0x011a rev 0x00: msix, NVMe 1.3
nvme0: KXG6AZNV1T02 TOSHIBA, firmware 5106AGLA, serial Z91S10Y8THBM
scsibus0 at nvme0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <NVMe, KXG6AZNV1T02 TOS, 5106>
sd0: 976762MB, 512 bytes/sector, 2000409264 sectors
ppb1 at pci0 dev 29 function 4 vendor "Intel", unknown product 0x02b4
rev 0xf0: msi
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
pci4 at ppb3 bus 7
"Intel JHL6540 Thunderbolt" rev 0x02 at pci4 dev 0 function 0 not configured
ppb4 at pci3 dev 1 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
pci5 at ppb4 bus 8
ppb5 at pci3 dev 2 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
pci6 at ppb5 bus 45
xhci1 at pci6 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02:
msi, xHCI 1.10
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
ppb6 at pci3 dev 4 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
pci7 at ppb6 bus 46
vendor "Intel", unknown product 0x0284 (class bridge subclass ISA, rev
0x00) at pci0 dev 31 function 0 not configured
vendor "Intel", unknown product 0x02c8 (class multimedia subclass
hdaudio, rev 0x00) at pci0 dev 31 function 3 not configured
vendor "Intel", unknown product 0x02a3 (class serial bus subclass
SMBus, rev 0x00) at pci0 dev 31 function 4 not configured
vendor "Intel", unknown product 0x02a4 (class serial bus unknown
subclass 0x80, rev 0x00) at pci0 dev 31 function 5 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address
f8:75:a4:ac:05:e9
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
uhub2 at uhub0 port 2 configuration 1 interface 0 "VIA Labs, Inc.
USB2.0 Hub" rev 2.10/a.04 addr 2
"Anker Innovations Limit Anker USB-C Hub Device" rev 2.01/0.01 addr 3
at uhub2 port 5 not configured
urtwn0 at uhub0 port 3 configuration 1 interface 0 "Realtek 802.11n
NIC" rev 2.00/0.00 addr 4
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address d0:37:45:73:c7:db
umass0 at uhub0 port 4 configuration 1 interface 0 "TOSHIBA
TransMemory" rev 2.00/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <TOSHIBA, TransMemory, 1.00> removable
serial.09306544C36197A41654
sd1: 14782MB, 512 bytes/sector, 30274560 sectors
"Azurewave Integrated Camera" rev 2.01/19.02 addr 6 at uhub0 port 8
not configured
"vendor 0x06cb product 0x00bd" rev 2.00/0.00 addr 7 at uhub0 port 9
not configured
"vendor 0x8087 product 0x0aaa" rev 2.00/0.02 addr 8 at uhub0 port 10
not configured
uhub3 at uhub1 port 3 configuration 1 interface 0 "VIA Labs, Inc.
USB3.0 Hub" rev 3.10/a.04 addr 2
umass1 at uhub3 port 3 configuration 1 interface 0 "Generic USB3.0
Card Reader" rev 3.20/15.39 addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <Generic, MassStorageClass, 1539> removable
sd3 at scsibus2 targ 1 lun 1: <Generic, MassStorageClass, 1539> removable
softraid0 at root
scsibus3 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 6.7-current (GENERIC.MP) #213: Sat May 23 20:38:40 MDT 2020
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16197828608 (15447MB)
avail mem = 15694282752 (14967MB)
random: good seed from bootblocks
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x6cc77000 (65 entries)
bios0: vendor LENOVO version "N2QET18W (1.12 )" date 12/10/2019
bios0: LENOVO 20R1CTO1WW
acpi0 at bios0: ACPI 6.1
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT SSDT TPM2 SSDT HPET APIC
MCFG ECDT SSDT SSDT SSDT NHLT BOOT SSDT LPIT WSMT SSDT DBGP DBG2 MSDM
BATB DMAR UEFI FPDT
acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4)
PXSX(S4) RP02(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4)
PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 7506.32 MHz, 06-8e-0c
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1712.73 MHz, 06-8e-0c
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1696.06 MHz, 06-8e-0c
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1696.06 MHz, 06-8e-0c
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1696.05 MHz, 06-8e-0c
cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1696.06 MHz, 06-8e-0c
cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1696.05 MHz, 06-8e-0c
cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 2, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1696.06 MHz, 06-8e-0c
cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf0000000, bus 0-127
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus -1 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus -1 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus 3 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus 5 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpipwrres0 at acpi0: PUBS, resource for XHC_
acpipwrres1 at acpi0: BTPR, resource for HS10
acpipwrres2 at acpi0: USBC, resource for XDCI
acpipwrres3 at acpi0: PXP_, resource for RP01, PXSX
acpipwrres4 at acpi0: PXP_, resource for RP13
acpipwrres5 at acpi0: V0PR
acpipwrres6 at acpi0: V1PR
acpipwrres7 at acpi0: V2PR
acpipwrres8 at acpi0: WRST
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu4 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu5 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu6 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu7 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 128 degC
acpipwrres9 at acpi0: PIN_
acpipwrres10 at acpi0: PINP
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
extent `acpipci0 pcibus' (0x0 - 0xff), flags=0
     0x7f - 0xff
extent `acpipci0 pciio' (0x0 - 0xffffffff), flags=0
     0xcf8 - 0xcff
     0x10000 - 0xffffffff
extent `acpipci0 pcimem' (0x0 - 0xffffffffffffffff), flags=0
     0x0 - 0x9ffff
     0xc0000 - 0x7d7fffff
     0xf0000000 - 0xfc7fffff
     0xfe800000 - 0xffffffffffffffff
acpithinkpad0 at acpi0: version 2.0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "02DL004" serial  3107 type LiP oem "LGC"
"PNP0C60" at acpi0 not configured
"LEN0111" at acpi0 not configured
"LEN0100" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"INT34BB" at acpi0 not configured
"SYNA8004" at acpi0 not configured
"ACPI000E" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT0E0C" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT3400" at acpi0 not configured
"STM7308" at acpi0 not configured
"USBC000" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: Enhanced SpeedStep 7506 MHz: speeds: 2301, 2300, 2200, 2000,
1800, 1700, 1600, 1500, 1300, 1200, 1100, 900, 800, 700, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x9b61 rev 0x0c
inteldrm0 at pci0 dev 2 function 0 vendor "Intel", unknown product
0x9b41 rev 0x02
drm0 at inteldrm0
inteldrm0: msi, COFFEELAKE, gen 9
"Intel Core 6G Thermal" rev 0x0c at pci0 dev 4 function 0 not configured
"Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
vendor "Intel", unknown product 0x02f9 (class DASP subclass
miscellaneous, rev 0x00) at pci0 dev 18 function 0 not configured
xhci0 at pci0 dev 20 function 0 vendor "Intel", unknown product 0x02ed
rev 0x00: msi, xHCI 1.10
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
vendor "Intel", unknown product 0x02ef (class memory subclass RAM, rev
0x00) at pci0 dev 20 function 2 not configured
vendor "Intel", unknown product 0x02f0 (class network subclass
miscellaneous, rev 0x00) at pci0 dev 20 function 3 not configured
vendor "Intel", unknown product 0x02e8 (class serial bus unknown
subclass 0x80, rev 0x00) at pci0 dev 21 function 0 not configured
vendor "Intel", unknown product 0x02e9 (class serial bus unknown
subclass 0x80, rev 0x00) at pci0 dev 21 function 1 not configured
vendor "Intel", unknown product 0x02e0 (class communications subclass
miscellaneous, rev 0x00) at pci0 dev 22 function 0 not configured
ppb0 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x02b0
rev 0xf0: msi
pci1 at ppb0 bus 3
nvme0 at pci1 dev 0 function 0 vendor "Toshiba", unknown product
0x011a rev 0x00: msix, NVMe 1.3
nvme0: KXG6AZNV1T02 TOSHIBA, firmware 5106AGLA, serial Z91S10Y8THBM
scsibus1 at nvme0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <NVMe, KXG6AZNV1T02 TOS, 5106>
sd0: 976762MB, 512 bytes/sector, 2000409264 sectors
ppb1 at pci0 dev 29 function 4 vendor "Intel", unknown product 0x02b4
rev 0xf0: msi
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
pci4 at ppb3 bus 7
"Intel JHL6540 Thunderbolt" rev 0x02 at pci4 dev 0 function 0 not configured
ppb4 at pci3 dev 1 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
pci5 at ppb4 bus 8
ppb5 at pci3 dev 2 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
pci6 at ppb5 bus 45
xhci1 at pci6 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02:
msi, xHCI 1.10
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
ppb6 at pci3 dev 4 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
pci7 at ppb6 bus 46
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x0284 rev 0x00
azalia0 at pci0 dev 31 function 3 vendor "Intel", unknown product
0x02c8 rev 0x00: msi
azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
audio0 at azalia0
vendor "Intel", unknown product 0x02a3 (class serial bus subclass
SMBus, rev 0x00) at pci0 dev 31 function 4 not configured
vendor "Intel", unknown product 0x02a4 (class serial bus unknown
subclass 0x80, rev 0x00) at pci0 dev 31 function 5 not configured
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address
f8:75:a4:ac:05:e9
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 2 configuration 1 interface 0 "VIA Labs, Inc.
USB2.0 Hub" rev 2.10/a.04 addr 2
ugen0 at uhub2 port 5 "Anker Innovations Limit Anker USB-C Hub Device"
rev 2.01/0.01 addr 3
urtwn0 at uhub0 port 3 configuration 1 interface 0 "Realtek 802.11n
NIC" rev 2.00/0.00 addr 4
urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address d0:37:45:73:c7:db
umass0 at uhub0 port 4 configuration 1 interface 0 "TOSHIBA
TransMemory" rev 2.00/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <TOSHIBA, TransMemory, 1.00> removable
serial.09306544C36197A41654
sd1: 14782MB, 512 bytes/sector, 30274560 sectors
uvideo0 at uhub0 port 8 configuration 1 interface 0 "Azurewave
Integrated Camera" rev 2.01/19.02 addr 6
video0 at uvideo0
ugen1 at uhub0 port 9 "Synaptics Fingerprint Reader" rev 2.00/0.00 addr 7
ugen2 at uhub0 port 10 "Intel product 0x0aaa" rev 2.00/0.02 addr 8
uhub3 at uhub1 port 3 configuration 1 interface 0 "VIA Labs, Inc.
USB3.0 Hub" rev 3.10/a.04 addr 2
umass1 at uhub3 port 3 configuration 1 interface 0 "Generic USB3.0
Card Reader" rev 3.20/15.39 addr 3
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd2 at scsibus3 targ 1 lun 0: <Generic, MassStorageClass, 1539> removable
sd3 at scsibus3 targ 1 lun 1: <Generic, MassStorageClass, 1539> removable
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on sd0a (9806eddfd99d3d8e.a) swap on sd0b dump on sd0b
drm:pid32029:csr_load_work_fn *NOTICE* Failed to load DMC firmware
i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
drm:pid32029:csr_load_work_fn *NOTICE* DMC firmware homepage:
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915drm:pid0:connector_bad_edid
*WARNING* HDMI-A-1: EDID is invalid:
[00] BAD  00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
[00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)

Reply | Threaded
Open this post in threaded view
|

Re: 6.7 boot crashes on "entry point at" X1 Carbon gen7 i7-10510U

Otto Moerbeek
On Sun, May 24, 2020 at 09:46:09PM +0900, John Mettraux wrote:

> On Sun, May 24, 2020 at 8:38 PM Otto Moerbeek <[hidden email]> wrote:
> >
> > On Sun, May 24, 2020 at 08:26:43PM +0900, John Mettraux wrote:
> >
> > > On Sun, May 24, 2020 at 5:36 PM Stuart Henderson <[hidden email]> wrote:
> > > >
> > > > On 2020-05-23, John Mettraux <[hidden email]> wrote:
> > > > >
> > > > > (...)
> > > > >
> > > > > Hard power down is the only way out, but rebooting still leads
> > > > > immediately to the
> > > > > "entry point at 0x1001000" wall. It is consistent. I tried boot -c,
> > > > > boot -d or boot -s,
> > > > > still the same wall.
> > > > >
> > > > > I have just tried with the install67.img snapshot (22-May-2020 21:12
> > > > > 476545024) from
> > > > > https://ftp.openbsd.org/pub/OpenBSD/snapshots/amd64/ but it leads to the same
> > > > > "entry point at 0x1001000" right after boot.
> > > >
> > > > Try downloading a 6.7 kernel (bsd.mp) to e.g. /bsd.test, and from the 6.6 boot
> > > > loader type "b /bsd.test". Do you still get the hang? This will give you an idea
> > > > whether the problem in 6.7 is with the newer boot loader or the kernel.
> > >
> > > I can confirm that the hang doesn't happen with the 6.7 kernel and the 6.6 boot
> > > loader (bootx64 3.46). The hang happens with the 6.7 boot loader (3.50).
> > >
> > > I will try to do a 6.7 install with the 3.46 boot loader.
> >
> > Can you also try using legacy boot mode (mbr)? There should be some
> > setting in the bios to enable that.
> >
> >         -Otto
>
> I tried to set the boot mode to [Legacy First] and [Legacy Only]. In
> both cases the Boot 3.47 kicked in
> and allowed me to install.
>
> I performed the install on the machine drive (sd0) with MBR and the
> install was successful.
> Dmesg below for the resulting 6.7 Snapshot.
>
> I tried to install on sd0 with GPT. The install warned me "An EFI/GPT
> disk may not boot. Proceed?"
> I answered yes. The install proceeded but upon reboot it froze with
> the "entry point at 0x1001000".
> This was with bootx64 3.50.
>
> I am going to re-install with sd0 MBR.
>
> Thanks a lot!
>
> John

I have an x1 6th generation that also does not like to boot using EFI.
There's is a difference though: it already had problems with EFI
when I initially installed it in Feb 2019.

I'll see if I can find some time to make a more detail diagnosis.

        -Otto

>
> ---dmesg---
>
> OpenBSD 6.7-current (RAMDISK_CD) #204: Fri May 22 20:38:04 MDT 2020
>     [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 16197828608 (15447MB)
> avail mem = 15702892544 (14975MB)
> random: good seed from bootblocks
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x6cc77000 (65 entries)
> bios0: vendor LENOVO version "N2QET18W (1.12 )" date 12/10/2019
> bios0: LENOVO 20R1CTO1WW
> acpi0 at bios0: ACPI 6.1
> acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT SSDT TPM2 SSDT HPET APIC
> MCFG ECDT SSDT SSDT SSDT NHLT BOOT SSDT LPIT WSMT SSDT DBGP DBG2 MSDM
> BATB DMAR UEFI FPDT
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 7498.82 MHz, 06-8e-0c
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: apic clock running at 24MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (RP01)
> acpiprt2 at acpi0: bus -1 (RP02)
> acpiprt3 at acpi0: bus -1 (RP03)
> acpiprt4 at acpi0: bus -1 (RP04)
> acpiprt5 at acpi0: bus -1 (RP05)
> acpiprt6 at acpi0: bus -1 (RP06)
> acpiprt7 at acpi0: bus -1 (RP07)
> acpiprt8 at acpi0: bus -1 (RP08)
> acpiprt9 at acpi0: bus 3 (RP09)
> acpiprt10 at acpi0: bus -1 (RP10)
> acpiprt11 at acpi0: bus -1 (RP11)
> acpiprt12 at acpi0: bus -1 (RP12)
> acpiprt13 at acpi0: bus 5 (RP13)
> acpiprt14 at acpi0: bus -1 (RP14)
> acpiprt15 at acpi0: bus -1 (RP15)
> acpiprt16 at acpi0: bus -1 (RP16)
> acpiprt17 at acpi0: bus -1 (RP17)
> acpiprt18 at acpi0: bus -1 (RP18)
> acpiprt19 at acpi0: bus -1 (RP19)
> acpiprt20 at acpi0: bus -1 (RP20)
> acpiprt21 at acpi0: bus -1 (RP21)
> acpiprt22 at acpi0: bus -1 (RP22)
> acpiprt23 at acpi0: bus -1 (RP23)
> acpiprt24 at acpi0: bus -1 (RP24)
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpicpu at acpi0 not configured
> acpitz at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> "LEN0268" at acpi0 not configured
> "ACPI0003" at acpi0 not configured
> "PNP0C0A" at acpi0 not configured
> "PNP0C60" at acpi0 not configured
> "LEN0111" at acpi0 not configured
> "LEN0100" at acpi0 not configured
> "INT3403" at acpi0 not configured
> "INT3403" at acpi0 not configured
> "INT34BB" at acpi0 not configured
> "SYNA8004" at acpi0 not configured
> "ACPI000E" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "INT0E0C" at acpi0 not configured
> "PNP0C0E" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "INT33A1" at acpi0 not configured
> "PNP0C0D" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "INT3400" at acpi0 not configured
> "STM7308" at acpi0 not configured
> "USBC000" at acpi0 not configured
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x9b61 rev 0x0c
> vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x9b41 rev 0x02
> wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
> "Intel Core 6G Thermal" rev 0x0c at pci0 dev 4 function 0 not configured
> "Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
> vendor "Intel", unknown product 0x02f9 (class DASP subclass
> miscellaneous, rev 0x00) at pci0 dev 18 function 0 not configured
> xhci0 at pci0 dev 20 function 0 vendor "Intel", unknown product 0x02ed
> rev 0x00: msi, xHCI 1.10
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> vendor "Intel", unknown product 0x02ef (class memory subclass RAM, rev
> 0x00) at pci0 dev 20 function 2 not configured
> vendor "Intel", unknown product 0x02f0 (class network subclass
> miscellaneous, rev 0x00) at pci0 dev 20 function 3 not configured
> vendor "Intel", unknown product 0x02e8 (class serial bus unknown
> subclass 0x80, rev 0x00) at pci0 dev 21 function 0 not configured
> vendor "Intel", unknown product 0x02e9 (class serial bus unknown
> subclass 0x80, rev 0x00) at pci0 dev 21 function 1 not configured
> vendor "Intel", unknown product 0x02e0 (class communications subclass
> miscellaneous, rev 0x00) at pci0 dev 22 function 0 not configured
> ppb0 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x02b0
> rev 0xf0: msi
> pci1 at ppb0 bus 3
> nvme0 at pci1 dev 0 function 0 vendor "Toshiba", unknown product
> 0x011a rev 0x00: msix, NVMe 1.3
> nvme0: KXG6AZNV1T02 TOSHIBA, firmware 5106AGLA, serial Z91S10Y8THBM
> scsibus0 at nvme0: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <NVMe, KXG6AZNV1T02 TOS, 5106>
> sd0: 976762MB, 512 bytes/sector, 2000409264 sectors
> ppb1 at pci0 dev 29 function 4 vendor "Intel", unknown product 0x02b4
> rev 0xf0: msi
> pci2 at ppb1 bus 5
> ppb2 at pci2 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02
> pci3 at ppb2 bus 6
> ppb3 at pci3 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
> pci4 at ppb3 bus 7
> "Intel JHL6540 Thunderbolt" rev 0x02 at pci4 dev 0 function 0 not configured
> ppb4 at pci3 dev 1 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
> pci5 at ppb4 bus 8
> ppb5 at pci3 dev 2 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
> pci6 at ppb5 bus 45
> xhci1 at pci6 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02:
> msi, xHCI 1.10
> usb1 at xhci1: USB revision 3.0
> uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> ppb6 at pci3 dev 4 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
> pci7 at ppb6 bus 46
> vendor "Intel", unknown product 0x0284 (class bridge subclass ISA, rev
> 0x00) at pci0 dev 31 function 0 not configured
> vendor "Intel", unknown product 0x02c8 (class multimedia subclass
> hdaudio, rev 0x00) at pci0 dev 31 function 3 not configured
> vendor "Intel", unknown product 0x02a3 (class serial bus subclass
> SMBus, rev 0x00) at pci0 dev 31 function 4 not configured
> vendor "Intel", unknown product 0x02a4 (class serial bus unknown
> subclass 0x80, rev 0x00) at pci0 dev 31 function 5 not configured
> em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address
> f8:75:a4:ac:05:e9
> isa0 at mainbus0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay1
> uhub2 at uhub0 port 2 configuration 1 interface 0 "VIA Labs, Inc.
> USB2.0 Hub" rev 2.10/a.04 addr 2
> "Anker Innovations Limit Anker USB-C Hub Device" rev 2.01/0.01 addr 3
> at uhub2 port 5 not configured
> urtwn0 at uhub0 port 3 configuration 1 interface 0 "Realtek 802.11n
> NIC" rev 2.00/0.00 addr 4
> urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address d0:37:45:73:c7:db
> umass0 at uhub0 port 4 configuration 1 interface 0 "TOSHIBA
> TransMemory" rev 2.00/1.00 addr 5
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <TOSHIBA, TransMemory, 1.00> removable
> serial.09306544C36197A41654
> sd1: 14782MB, 512 bytes/sector, 30274560 sectors
> "Azurewave Integrated Camera" rev 2.01/19.02 addr 6 at uhub0 port 8
> not configured
> "vendor 0x06cb product 0x00bd" rev 2.00/0.00 addr 7 at uhub0 port 9
> not configured
> "vendor 0x8087 product 0x0aaa" rev 2.00/0.02 addr 8 at uhub0 port 10
> not configured
> uhub3 at uhub1 port 3 configuration 1 interface 0 "VIA Labs, Inc.
> USB3.0 Hub" rev 3.10/a.04 addr 2
> umass1 at uhub3 port 3 configuration 1 interface 0 "Generic USB3.0
> Card Reader" rev 3.20/15.39 addr 3
> umass1: using SCSI over Bulk-Only
> scsibus2 at umass1: 2 targets, initiator 0
> sd2 at scsibus2 targ 1 lun 0: <Generic, MassStorageClass, 1539> removable
> sd3 at scsibus2 targ 1 lun 1: <Generic, MassStorageClass, 1539> removable
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on rd0a swap on rd0b dump on rd0b
> syncing disks...
> OpenBSD 6.7-current (GENERIC.MP) #213: Sat May 23 20:38:40 MDT 2020
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16197828608 (15447MB)
> avail mem = 15694282752 (14967MB)
> random: good seed from bootblocks
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 3.2 @ 0x6cc77000 (65 entries)
> bios0: vendor LENOVO version "N2QET18W (1.12 )" date 12/10/2019
> bios0: LENOVO 20R1CTO1WW
> acpi0 at bios0: ACPI 6.1
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT SSDT TPM2 SSDT HPET APIC
> MCFG ECDT SSDT SSDT SSDT NHLT BOOT SSDT LPIT WSMT SSDT DBGP DBG2 MSDM
> BATB DMAR UEFI FPDT
> acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4)
> PXSX(S4) RP02(S4) PXSX(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4)
> PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 23999999 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 7506.32 MHz, 06-8e-0c
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 24MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1712.73 MHz, 06-8e-0c
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1696.06 MHz, 06-8e-0c
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1696.06 MHz, 06-8e-0c
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> cpu4 at mainbus0: apid 1 (application processor)
> cpu4: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1696.05 MHz, 06-8e-0c
> cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu4: 256KB 64b/line 8-way L2 cache
> cpu4: smt 1, core 0, package 0
> cpu5 at mainbus0: apid 3 (application processor)
> cpu5: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1696.06 MHz, 06-8e-0c
> cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu5: 256KB 64b/line 8-way L2 cache
> cpu5: smt 1, core 1, package 0
> cpu6 at mainbus0: apid 5 (application processor)
> cpu6: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1696.05 MHz, 06-8e-0c
> cpu6: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu6: 256KB 64b/line 8-way L2 cache
> cpu6: smt 1, core 2, package 0
> cpu7 at mainbus0: apid 7 (application processor)
> cpu7: Intel(R) Core(TM) i7-10510U CPU @ 1.80GHz, 1696.06 MHz, 06-8e-0c
> cpu7: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES
> cpu7: 256KB 64b/line 8-way L2 cache
> cpu7: smt 1, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xf0000000, bus 0-127
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (RP01)
> acpiprt2 at acpi0: bus -1 (RP02)
> acpiprt3 at acpi0: bus -1 (RP03)
> acpiprt4 at acpi0: bus -1 (RP04)
> acpiprt5 at acpi0: bus -1 (RP05)
> acpiprt6 at acpi0: bus -1 (RP06)
> acpiprt7 at acpi0: bus -1 (RP07)
> acpiprt8 at acpi0: bus -1 (RP08)
> acpiprt9 at acpi0: bus 3 (RP09)
> acpiprt10 at acpi0: bus -1 (RP10)
> acpiprt11 at acpi0: bus -1 (RP11)
> acpiprt12 at acpi0: bus -1 (RP12)
> acpiprt13 at acpi0: bus 5 (RP13)
> acpiprt14 at acpi0: bus -1 (RP14)
> acpiprt15 at acpi0: bus -1 (RP15)
> acpiprt16 at acpi0: bus -1 (RP16)
> acpiprt17 at acpi0: bus -1 (RP17)
> acpiprt18 at acpi0: bus -1 (RP18)
> acpiprt19 at acpi0: bus -1 (RP19)
> acpiprt20 at acpi0: bus -1 (RP20)
> acpiprt21 at acpi0: bus -1 (RP21)
> acpiprt22 at acpi0: bus -1 (RP22)
> acpiprt23 at acpi0: bus -1 (RP23)
> acpiprt24 at acpi0: bus -1 (RP24)
> acpipwrres0 at acpi0: PUBS, resource for XHC_
> acpipwrres1 at acpi0: BTPR, resource for HS10
> acpipwrres2 at acpi0: USBC, resource for XDCI
> acpipwrres3 at acpi0: PXP_, resource for RP01, PXSX
> acpipwrres4 at acpi0: PXP_, resource for RP13
> acpipwrres5 at acpi0: V0PR
> acpipwrres6 at acpi0: V1PR
> acpipwrres7 at acpi0: V2PR
> acpipwrres8 at acpi0: WRST
> acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu4 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu5 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu6 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu7 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpitz0 at acpi0: critical temperature is 128 degC
> acpipwrres9 at acpi0: PIN_
> acpipwrres10 at acpi0: PINP
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> extent `acpipci0 pcibus' (0x0 - 0xff), flags=0
>      0x7f - 0xff
> extent `acpipci0 pciio' (0x0 - 0xffffffff), flags=0
>      0xcf8 - 0xcff
>      0x10000 - 0xffffffff
> extent `acpipci0 pcimem' (0x0 - 0xffffffffffffffff), flags=0
>      0x0 - 0x9ffff
>      0xc0000 - 0x7d7fffff
>      0xf0000000 - 0xfc7fffff
>      0xfe800000 - 0xffffffffffffffff
> acpithinkpad0 at acpi0: version 2.0
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0 model "02DL004" serial  3107 type LiP oem "LGC"
> "PNP0C60" at acpi0 not configured
> "LEN0111" at acpi0 not configured
> "LEN0100" at acpi0 not configured
> "INT3403" at acpi0 not configured
> "INT3403" at acpi0 not configured
> "INT34BB" at acpi0 not configured
> "SYNA8004" at acpi0 not configured
> "ACPI000E" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "INT0E0C" at acpi0 not configured
> acpibtn0 at acpi0: SLPB
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "INT33A1" at acpi0 not configured
> acpibtn1 at acpi0: LID_
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "INT3400" at acpi0 not configured
> "STM7308" at acpi0 not configured
> "USBC000" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> cpu0: Enhanced SpeedStep 7506 MHz: speeds: 2301, 2300, 2200, 2000,
> 1800, 1700, 1600, 1500, 1300, 1200, 1100, 900, 800, 700, 500, 400 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x9b61 rev 0x0c
> inteldrm0 at pci0 dev 2 function 0 vendor "Intel", unknown product
> 0x9b41 rev 0x02
> drm0 at inteldrm0
> inteldrm0: msi, COFFEELAKE, gen 9
> "Intel Core 6G Thermal" rev 0x0c at pci0 dev 4 function 0 not configured
> "Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
> vendor "Intel", unknown product 0x02f9 (class DASP subclass
> miscellaneous, rev 0x00) at pci0 dev 18 function 0 not configured
> xhci0 at pci0 dev 20 function 0 vendor "Intel", unknown product 0x02ed
> rev 0x00: msi, xHCI 1.10
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> vendor "Intel", unknown product 0x02ef (class memory subclass RAM, rev
> 0x00) at pci0 dev 20 function 2 not configured
> vendor "Intel", unknown product 0x02f0 (class network subclass
> miscellaneous, rev 0x00) at pci0 dev 20 function 3 not configured
> vendor "Intel", unknown product 0x02e8 (class serial bus unknown
> subclass 0x80, rev 0x00) at pci0 dev 21 function 0 not configured
> vendor "Intel", unknown product 0x02e9 (class serial bus unknown
> subclass 0x80, rev 0x00) at pci0 dev 21 function 1 not configured
> vendor "Intel", unknown product 0x02e0 (class communications subclass
> miscellaneous, rev 0x00) at pci0 dev 22 function 0 not configured
> ppb0 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x02b0
> rev 0xf0: msi
> pci1 at ppb0 bus 3
> nvme0 at pci1 dev 0 function 0 vendor "Toshiba", unknown product
> 0x011a rev 0x00: msix, NVMe 1.3
> nvme0: KXG6AZNV1T02 TOSHIBA, firmware 5106AGLA, serial Z91S10Y8THBM
> scsibus1 at nvme0: 2 targets, initiator 0
> sd0 at scsibus1 targ 1 lun 0: <NVMe, KXG6AZNV1T02 TOS, 5106>
> sd0: 976762MB, 512 bytes/sector, 2000409264 sectors
> ppb1 at pci0 dev 29 function 4 vendor "Intel", unknown product 0x02b4
> rev 0xf0: msi
> pci2 at ppb1 bus 5
> ppb2 at pci2 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02
> pci3 at ppb2 bus 6
> ppb3 at pci3 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
> pci4 at ppb3 bus 7
> "Intel JHL6540 Thunderbolt" rev 0x02 at pci4 dev 0 function 0 not configured
> ppb4 at pci3 dev 1 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
> pci5 at ppb4 bus 8
> ppb5 at pci3 dev 2 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
> pci6 at ppb5 bus 45
> xhci1 at pci6 dev 0 function 0 "Intel JHL6540 Thunderbolt" rev 0x02:
> msi, xHCI 1.10
> usb1 at xhci1: USB revision 3.0
> uhub1 at usb1 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> ppb6 at pci3 dev 4 function 0 "Intel JHL6540 Thunderbolt" rev 0x02: msi
> pci7 at ppb6 bus 46
> pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x0284 rev 0x00
> azalia0 at pci0 dev 31 function 3 vendor "Intel", unknown product
> 0x02c8 rev 0x00: msi
> azalia0: codecs: Realtek ALC285, Intel/0x280b, using Realtek ALC285
> audio0 at azalia0
> vendor "Intel", unknown product 0x02a3 (class serial bus subclass
> SMBus, rev 0x00) at pci0 dev 31 function 4 not configured
> vendor "Intel", unknown product 0x02a4 (class serial bus unknown
> subclass 0x80, rev 0x00) at pci0 dev 31 function 5 not configured
> em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x00: msi, address
> f8:75:a4:ac:05:e9
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> uhub2 at uhub0 port 2 configuration 1 interface 0 "VIA Labs, Inc.
> USB2.0 Hub" rev 2.10/a.04 addr 2
> ugen0 at uhub2 port 5 "Anker Innovations Limit Anker USB-C Hub Device"
> rev 2.01/0.01 addr 3
> urtwn0 at uhub0 port 3 configuration 1 interface 0 "Realtek 802.11n
> NIC" rev 2.00/0.00 addr 4
> urtwn0: MAC/BB RTL8188EU, RF 6052 1T1R, address d0:37:45:73:c7:db
> umass0 at uhub0 port 4 configuration 1 interface 0 "TOSHIBA
> TransMemory" rev 2.00/1.00 addr 5
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <TOSHIBA, TransMemory, 1.00> removable
> serial.09306544C36197A41654
> sd1: 14782MB, 512 bytes/sector, 30274560 sectors
> uvideo0 at uhub0 port 8 configuration 1 interface 0 "Azurewave
> Integrated Camera" rev 2.01/19.02 addr 6
> video0 at uvideo0
> ugen1 at uhub0 port 9 "Synaptics Fingerprint Reader" rev 2.00/0.00 addr 7
> ugen2 at uhub0 port 10 "Intel product 0x0aaa" rev 2.00/0.02 addr 8
> uhub3 at uhub1 port 3 configuration 1 interface 0 "VIA Labs, Inc.
> USB3.0 Hub" rev 3.10/a.04 addr 2
> umass1 at uhub3 port 3 configuration 1 interface 0 "Generic USB3.0
> Card Reader" rev 3.20/15.39 addr 3
> umass1: using SCSI over Bulk-Only
> scsibus3 at umass1: 2 targets, initiator 0
> sd2 at scsibus3 targ 1 lun 0: <Generic, MassStorageClass, 1539> removable
> sd3 at scsibus3 targ 1 lun 1: <Generic, MassStorageClass, 1539> removable
> vscsi0 at root
> scsibus4 at vscsi0: 256 targets
> softraid0 at root
> scsibus5 at softraid0: 256 targets
> root on sd0a (9806eddfd99d3d8e.a) swap on sd0b dump on sd0b
> drm:pid32029:csr_load_work_fn *NOTICE* Failed to load DMC firmware
> i915/kbl_dmc_ver1_04.bin. Disabling runtime power management.
> drm:pid32029:csr_load_work_fn *NOTICE* DMC firmware homepage:
> https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915drm:pid0:connector_bad_edid
> *WARNING* HDMI-A-1: EDID is invalid:
> [00] BAD  00 ff ff ff ff ff ff 00 ff ff ff ff ff ff ff ff
> [00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> [00] BAD  ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> inteldrm0: 1920x1080, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>

Reply | Threaded
Open this post in threaded view
|

Re: 6.7 boot crashes on "entry point at" X1 Carbon gen7 i7-10510U

Otto Moerbeek
On Mon, May 25, 2020 at 08:29:56AM +0200, Otto Moerbeek wrote:

> On Sun, May 24, 2020 at 09:46:09PM +0900, John Mettraux wrote:
>
> > On Sun, May 24, 2020 at 8:38 PM Otto Moerbeek <[hidden email]> wrote:
> > >
> > > On Sun, May 24, 2020 at 08:26:43PM +0900, John Mettraux wrote:
> > >
> > > > On Sun, May 24, 2020 at 5:36 PM Stuart Henderson <[hidden email]> wrote:
> > > > >
> > > > > On 2020-05-23, John Mettraux <[hidden email]> wrote:
> > > > > >
> > > > > > (...)
> > > > > >
> > > > > > Hard power down is the only way out, but rebooting still leads
> > > > > > immediately to the
> > > > > > "entry point at 0x1001000" wall. It is consistent. I tried boot -c,
> > > > > > boot -d or boot -s,
> > > > > > still the same wall.
> > > > > >
> > > > > > I have just tried with the install67.img snapshot (22-May-2020 21:12
> > > > > > 476545024) from
> > > > > > https://ftp.openbsd.org/pub/OpenBSD/snapshots/amd64/ but it leads to the same
> > > > > > "entry point at 0x1001000" right after boot.
> > > > >
> > > > > Try downloading a 6.7 kernel (bsd.mp) to e.g. /bsd.test, and from the 6.6 boot
> > > > > loader type "b /bsd.test". Do you still get the hang? This will give you an idea
> > > > > whether the problem in 6.7 is with the newer boot loader or the kernel.
> > > >
> > > > I can confirm that the hang doesn't happen with the 6.7 kernel and the 6.6 boot
> > > > loader (bootx64 3.46). The hang happens with the 6.7 boot loader (3.50).
> > > >
> > > > I will try to do a 6.7 install with the 3.46 boot loader.
> > >
> > > Can you also try using legacy boot mode (mbr)? There should be some
> > > setting in the bios to enable that.
> > >
> > >         -Otto
> >
> > I tried to set the boot mode to [Legacy First] and [Legacy Only]. In
> > both cases the Boot 3.47 kicked in
> > and allowed me to install.
> >
> > I performed the install on the machine drive (sd0) with MBR and the
> > install was successful.
> > Dmesg below for the resulting 6.7 Snapshot.
> >
> > I tried to install on sd0 with GPT. The install warned me "An EFI/GPT
> > disk may not boot. Proceed?"
> > I answered yes. The install proceeded but upon reboot it froze with
> > the "entry point at 0x1001000".
> > This was with bootx64 3.50.
> >
> > I am going to re-install with sd0 MBR.
> >
> > Thanks a lot!
> >
> > John
>
> I have an x1 6th generation that also does not like to boot using EFI.
> There's is a difference though: it already had problems with EFI
> when I initially installed it in Feb 2019.
>
> I'll see if I can find some time to make a more detail diagnosis.

I just tried and EFI boot with the latst snap works on it.  efifb(4)
is not configured but for the rest it seems to work ok using bootx64
3.50 and BIOS version 1.44.

        -Otto

Reply | Threaded
Open this post in threaded view
|

Re: 6.7 boot crashes on "entry point at" X1 Carbon gen7 i7-10510U

John Mettraux
On Mon, May 25, 2020 at 6:04 PM Otto Moerbeek <[hidden email]> wrote:

>
> On Mon, May 25, 2020 at 08:29:56AM +0200, Otto Moerbeek wrote:
>
> > On Sun, May 24, 2020 at 09:46:09PM +0900, John Mettraux wrote:
> >
> > > On Sun, May 24, 2020 at 8:38 PM Otto Moerbeek <[hidden email]> wrote:
> > > >
> > > > On Sun, May 24, 2020 at 08:26:43PM +0900, John Mettraux wrote:
> > > >
> > > > > On Sun, May 24, 2020 at 5:36 PM Stuart Henderson <[hidden email]> wrote:
> > > > > >
> > > > > > On 2020-05-23, John Mettraux <[hidden email]> wrote:
> > > > > > >
> > > > > > > (...)
> > > > > > >
> > > > > > > Hard power down is the only way out, but rebooting still leads
> > > > > > > immediately to the
> > > > > > > "entry point at 0x1001000" wall. It is consistent. I tried boot -c,
> > > > > > > boot -d or boot -s,
> > > > > > > still the same wall.
> > > > > > >
> > > > > > > I have just tried with the install67.img snapshot (22-May-2020 21:12
> > > > > > > 476545024) from
> > > > > > > https://ftp.openbsd.org/pub/OpenBSD/snapshots/amd64/ but it leads to the same
> > > > > > > "entry point at 0x1001000" right after boot.
> > > > > >
> > > > > > Try downloading a 6.7 kernel (bsd.mp) to e.g. /bsd.test, and from the 6.6 boot
> > > > > > loader type "b /bsd.test". Do you still get the hang? This will give you an idea
> > > > > > whether the problem in 6.7 is with the newer boot loader or the kernel.
> > > > >
> > > > > I can confirm that the hang doesn't happen with the 6.7 kernel and the 6.6 boot
> > > > > loader (bootx64 3.46). The hang happens with the 6.7 boot loader (3.50).
> > > > >
> > > > > I will try to do a 6.7 install with the 3.46 boot loader.
> > > >
> > > > Can you also try using legacy boot mode (mbr)? There should be some
> > > > setting in the bios to enable that.
> > > >
> > > >         -Otto
> > >
> > > I tried to set the boot mode to [Legacy First] and [Legacy Only]. In
> > > both cases the Boot 3.47 kicked in
> > > and allowed me to install.
> > >
> > > I performed the install on the machine drive (sd0) with MBR and the
> > > install was successful.
> > > Dmesg below for the resulting 6.7 Snapshot.
> > >
> > > I tried to install on sd0 with GPT. The install warned me "An EFI/GPT
> > > disk may not boot. Proceed?"
> > > I answered yes. The install proceeded but upon reboot it froze with
> > > the "entry point at 0x1001000".
> > > This was with bootx64 3.50.
> > >
> > > I am going to re-install with sd0 MBR.
> > >
> > > Thanks a lot!
> > >
> > > John
> >
> > I have an x1 6th generation that also does not like to boot using EFI.
> > There's is a difference though: it already had problems with EFI
> > when I initially installed it in Feb 2019.
> >
> > I'll see if I can find some time to make a more detail diagnosis.
>
> I just tried and EFI boot with the latst snap works on it.  efifb(4)
> is not configured but for the rest it seems to work ok using bootx64
> 3.50 and BIOS version 1.44.
>
>         -Otto

Hello,

I have tried yesterday an EFI boot with the install67.img snapshot
(22-May-2020 21:12),
but it froze at  "entry point at 0x1001000".

I had this laptop with a vanilla 6.6 booting from EFI until last week.

I have now re-installed a vanilla 6.7 booting from MBR following your advice and
it's fine for now.

Thanks again!

John