6.5 - Unresponsive ddb prompt after kernel page fault trap

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

6.5 - Unresponsive ddb prompt after kernel page fault trap

Patrick Harper
My only resolve was to power the system off from the hardware switch. The filesystems on sd0 are repaired during boot up and other filesystems are repaired with fsck after that.

I have a direct link to a photo of the console output for those with an image viewer: https://dl.dropboxusercontent.com/s/zs5pmu36f9dghkc/IMG_20190519_223420.jpg

The split consoles on the screen are not an accident but a consequence of my xorg config files.

Below is an attempt to type part of the output from the photo:

Login: kernel: page fault trap, code=0
Stopped at softclock+0x57: movq %rdx,0x8(%rcx)
ddb{0}>

At the time of the crash, Chromium, two xterms, xclock, feh and cwm were running, but there had been no interaction for at least 30 seconds. Prior to the incident I had been changing and reloading .Xresources, mainly trying to get the Terminus font working in xterm with UTF-8 support.

The system has a couple of other issues that might be related. After a halt -p, the system will sometimes freeze just short of halting the power so I finish the job with the hardware switch. The filesystems are already unmounted in this case so I consider this a lesser issue.

A rarer issue is the system failing to resume after the display is blanked. The only thing I can do is the same as the kernel crash, power off from the switch. All of this happened under 6.4 as well but the 6.4 system was an online upgrade from 6.3. The 6.5 system is a fresh install.

dmesg is below, this is from the boot up following the crash:

OpenBSD 6.5 (GENERIC.MP) #0: Wed Apr 24 23:38:54 CEST 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34325528576 (32735MB)
avail mem = 33275613184 (31734MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9ec00 (82 entries)
bios0: vendor American Megatrends Inc. version "3303" date 10/28/2014
bios0: ASUSTeK Computer INC. KCMA-D8
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SPMI OEMB HPET SRAT SLIT SSDT EINJ BERT ERST HEST
acpi0: wakeup devices PC02(S4) PC03(S4) PC04(S4) PC05(S4) PC06(S4) PC07(S4) PC09(S4) PC0A(S4) PC0B(S4) PC0C(S4) PC0D(S4) SBAZ(S4) UAR1(S4) UAR2(S4) P0PC(S4) UHC1(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: AMD Opteron(tm) Processor 4332 HE, 3000.43 MHz, 15-02-00
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,ITSC,BMI1
cpu0: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache, 8MB 64b/line 64-way L3 cache
cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 17 (application processor)
cpu1: AMD Opteron(tm) Processor 4332 HE, 3000.00 MHz, 15-02-00
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,ITSC,BMI1
cpu1: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache, 8MB 64b/line 64-way L3 cache
cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 18 (application processor)
cpu2: AMD Opteron(tm) Processor 4332 HE, 3000.00 MHz, 15-02-00
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,ITSC,BMI1
cpu2: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache, 8MB 64b/line 64-way L3 cache
cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 19 (application processor)
cpu3: AMD Opteron(tm) Processor 4332 HE, 3000.00 MHz, 15-02-00
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,ITSC,BMI1
cpu3: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache, 8MB 64b/line 64-way L3 cache
cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu3: smt 1, core 1, package 0
cpu4 at mainbus0: apid 20 (application processor)
cpu4: AMD Opteron(tm) Processor 4332 HE, 3000.00 MHz, 15-02-00
cpu4: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,ITSC,BMI1
cpu4: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache, 8MB 64b/line 64-way L3 cache
cpu4: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu4: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu4: smt 0, core 2, package 0
cpu5 at mainbus0: apid 21 (application processor)
cpu5: AMD Opteron(tm) Processor 4332 HE, 3000.00 MHz, 15-02-00
cpu5: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,ITSC,BMI1
cpu5: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache, 8MB 64b/line 64-way L3 cache
cpu5: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu5: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu5: smt 1, core 2, package 0
ioapic0 at mainbus0: apid 22 pa 0xfec00000, version 21, 24 pins, can't remap
ioapic1 at mainbus0: apid 23 pa 0xfec20000, version 21, 32 pins, can't remap
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (PC02)
acpiprt2 at acpi0: bus -1 (PC03)
acpiprt3 at acpi0: bus 5 (PC04)
acpiprt4 at acpi0: bus -1 (PC05)
acpiprt5 at acpi0: bus -1 (PC06)
acpiprt6 at acpi0: bus -1 (PC07)
acpiprt7 at acpi0: bus 4 (PC09)
acpiprt8 at acpi0: bus 3 (PC0A)
acpiprt9 at acpi0: bus 2 (PC0B)
acpiprt10 at acpi0: bus -1 (PC0C)
acpiprt11 at acpi0: bus -1 (PC0D)
acpiprt12 at acpi0: bus 1 (P0PC)
acpicpu0 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS
acpicpu2 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS
acpicpu3 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS
acpicpu4 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS
acpicpu5 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS
acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
acpicmos0 at acpi0
"PNP0A05" at acpi0 not configured
acpibtn0 at acpi0: PWRB
ipmi at mainbus0 not configured
cpu0: 3000 MHz: speeds: 3000 2600 2200 1800 1400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "ATI SR5670 Host" rev 0x02
ppb0 at pci0 dev 2 function 0 "ATI SR5690 PCIE" rev 0x00: msi
pci1 at ppb0 bus 6
radeondrm0 at pci1 dev 0 function 0 "ATI FirePro V5900" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci1 dev 0 function 1 vendor "ATI", unknown product 0xaa80 rev 0x00: msi
azalia0: no supported codecs
ppb1 at pci0 dev 4 function 0 "ATI SR5690 PCIE" rev 0x00: msi
pci2 at ppb1 bus 5
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0x73, msi
ppb2 at pci0 dev 9 function 0 "ATI SR5690 PCIE" rev 0x00: msi
pci3 at ppb2 bus 4
em0 at pci3 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address d0:17:c2:c9:fd:a1
ppb3 at pci0 dev 10 function 0 "ATI SR5690 PCIE" rev 0x00: msi
pci4 at ppb3 bus 3
em1 at pci4 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address d0:17:c2:c9:fd:a0
ppb4 at pci0 dev 11 function 0 "ATI SR5690 PCIE" rev 0x00: msi
pci5 at ppb4 bus 2
xhci0 at pci5 dev 0 function 0 "VIA VL805 xHCI" rev 0x01: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "VIA xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 22 int 22, AHCI 1.1
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 4: 3.0Gb/s
ahci0: port 5: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SKC400S, SAFM> SCSI3 0/direct fixed naa.50026b7674000e1b
sd0: 488386MB, 512 bytes/sector, 1000215216 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD4004FZWX-0, 81.H> SCSI3 0/direct fixed naa.5000cca25ddd1d0a
sd1: 3815447MB, 512 bytes/sector, 7814037168 sectors
sd2 at scsibus1 targ 2 lun 0: <ATA, WDC WD4004FZWX-0, 81.H> SCSI3 0/direct fixed naa.5000cca25ddcce45
sd2: 3815447MB, 512 bytes/sector, 7814037168 sectors
sd3 at scsibus1 targ 4 lun 0: <ATA, WDC WD5000BPKX-7, 01.0> SCSI3 0/direct fixed naa.50014ee659969bc9
sd3: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus1 targ 5 lun 0: <HL-DT-ST, BD-RE BH16NS55, 1.02> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 22 int 16, version 1.0, legacy support
ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 22 int 16, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 22 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 22 int 18, version 1.0, legacy support
ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 22 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 22 int 19
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "ATI EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3d: SMI
iic0 at piixpm0
iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00 0a=00 0b=00 0c=00 0d=00 0e=0d 0f=a4 10=00 11=00 12=00 13=00 14=00 15=00 16=17 17=a0 18=c0 19=00 1a=00 1b=00 1c=00 1d=00 1e=0c 1f=05 20=09 21=09 22=09 23=09 24=03 3e=03 words 00=ff00 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x21 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00 0a=00 0b=00 0c=00 0d=00 0e=00 0f=24 10=00 11=00 12=00 13=00 14=00 15=00 16=00 17=24 18=00 19=00 1a=00 1b=00 1c=00 1d=00 1e=00 1f=06 20=09 21=09 22=09 23=09 24=03 3e=03 words 00=ff00 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
ppb5 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
pci6 at ppb5 bus 1
pciide1 at pci6 dev 2 function 0 "CMD Technology PCI0680" rev 0x02
pciide1: bus-master DMA support present
pciide1: channel 0 configured to native-PCI mode
pciide1: using apic 22 int 21 for native-PCI interrupt
pciide1: channel 1 configured to native-PCI mode
atapiscsi0 at pciide1 channel 1 drive 0
scsibus2 at atapiscsi0: 2 targets
cd1 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVD+-RW GSA-H53N, B104> ATAPI 5/cdrom removable
cd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
"ASPEED Technology AST2000" rev 0x10 at pci6 dev 5 function 0 not configured
ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 22 int 18, version 1.0, legacy support
pchb1 at pci0 dev 24 function 0 "AMD AMD64 15/0xh Link Cfg" rev 0x00
pchb2 at pci0 dev 24 function 1 "AMD AMD64 15/0xh Address Map" rev 0x00
pchb3 at pci0 dev 24 function 2 "AMD AMD64 15/0xh DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 15/0xh Misc Cfg" rev 0x00
pchb4 at pci0 dev 24 function 4 "AMD AMD64 15/0xh CPU Power" rev 0x00
pchb5 at pci0 dev 24 function 5 "AMD AMD64 15/0xh Host" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci2: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci3: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
usb7 at ohci4: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "ATI OHCI root hub" rev 1.00/1.00 addr 1
vmm0 at mainbus0: SVM/RVI
uhub8 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub" rev 2.10/4.20 addr 2
uhub9 at uhub8 port 1 configuration 1 interface 0 "VIA Labs, Inc. USB2.0 Hub" rev 2.10/90.90 addr 3
uhub10 at uhub8 port 4 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev 2.10/92.12 addr 4
uhidev0 at uhub10 port 4 configuration 1 interface 0 "NEC EA244UHD" rev 2.00/0.02 addr 5
uhidev0: iclass 3/0
uhid0 at uhidev0: input=64, output=64, feature=0
uhub11 at uhub0 port 2 configuration 1 interface 0 "VIA Labs, Inc. USB3.0 Hub" rev 3.00/90.91 addr 6
umass0 at uhub0 port 3 configuration 1 interface 0 "HGST G-DRIVE USB" rev 3.00/26.02 addr 7
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd4 at scsibus3 targ 1 lun 0: <G-DRIVE, USB, 2602> SCSI4 0/direct fixed serial.49718034BE0152901613
sd4: 3815447MB, 512 bytes/sector, 7814037168 sectors
umass1 at uhub0 port 4 configuration 1 interface 0 "HGST G-DRIVE USB" rev 3.00/26.02 addr 8
umass1: using SCSI over Bulk-Only
scsibus4 at umass1: 2 targets, initiator 0
sd5 at scsibus4 targ 1 lun 0: <G-DRIVE, USB, 2602> SCSI4 0/direct fixed serial.49718034BE0152901650
sd5: 3815447MB, 512 bytes/sector, 7814037168 sectors
uhub12 at uhub0 port 5 configuration 1 interface 0 " " rev 3.00/92.12 addr 9
umass2 at uhub12 port 2 configuration 1 interface 0 "Lexar USB_3_0 Reader" rev 3.00/0.01 addr 10
umass2: using SCSI over Bulk-Only
scsibus5 at umass2: 2 targets, initiator 0
sd6 at scsibus5 targ 1 lun 0: <Lexar, CF USB_3_0 Read, LX01> SCSI3 0/direct removable
sd7 at scsibus5 targ 1 lun 1: <Lexar, SD USB_3_0 Read, LX01> SCSI3 0/direct removable
sd8 at scsibus5 targ 1 lun 2: <Lexar, MS USB_3_0 Read, LX01> SCSI3 0/direct removable
sd9 at scsibus5 targ 1 lun 3: <Lexar, MSD USB_3_0 Read, LX01> SCSI3 0/direct removable
sd10 at scsibus5 targ 1 lun 4: <Lexar, XD USB_3_0 Read, LX01> SCSI3 0/direct removable
uhub13 at uhub1 port 1 configuration 1 interface 0 "NEC hub" rev 2.00/1.00 addr 2
uhidev1 at uhub13 port 1 configuration 1 interface 0 "Topre Corporation HHKB Professional" rev 1.10/1.02 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub13 port 3 configuration 1 interface 0 "Clearly Superior Technologies. CST Laser Trackball" rev 2.00/11.00 addr 4
uhidev2: iclass 3/1
ums0 at uhidev2: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uvideo0 at uhub1 port 6 configuration 1 interface 0 "Microsoft Microsoft\M-. LifeCam VX-7000" rev 2.00/1.00 addr 5
video0 at uvideo0
uaudio0 at uhub1 port 6 configuration 1 interface 3 "Microsoft Microsoft\M-. LifeCam VX-7000" rev 2.00/1.00 addr 5
uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 3 ctls
audio0 at uaudio0
umass3 at uhub3 port 2 configuration 1 interface 0 "MITSUMI MITSUMI USB FDD" rev 1.10/1.00 addr 2
umass3: using UFI over CBI with CCI
scsibus6 at umass3: 2 targets, initiator 0
sd11 at scsibus6 targ 1 lun 0: <MITSUMI, USB FDD, 1049> ATAPI 0/direct removable
uaudio1 at uhub4 port 2 configuration 1 interface 1 "Burr-Brown from TI USB Audio CODEC" rev 1.10/1.00 addr 2
uaudio1: class v1, full-speed, sync, channels: 2 play, 2 rec, 3 ctls
audio1 at uaudio1
uhidev3 at uhub4 port 2 configuration 1 interface 3 "Burr-Brown from TI USB Audio CODEC" rev 1.10/1.00 addr 2
uhidev3: iclass 3/0
uhid1 at uhidev3: input=1, output=0, feature=0
vscsi0 at root
scsibus7 at vscsi0: 256 targets
softraid0 at root
scsibus8 at softraid0: 256 targets
root on sd0a (f0a32f31cf87e1dc.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
initializing kernel modesetting (CAYMAN 0x1002:0x6707 0x1002:0x0B06).
radeondrm0: 3840x2160, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iwm0: hw rev 0x140, fw ver 16.242414.0, address 7c:5c:f8:f3:35:2c
WARNING: R/W mount of /mnt/int1 denied.  Filesystem is not clean - run fsck
WARNING: R/W mount of /mnt/int1 denied.  Filesystem is not clean - run fsck
--
  Patrick Harper
  [hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: 6.5 - Unresponsive ddb prompt after kernel page fault trap

Patrick Harper
At the time I sent this mail, I was aware that the SP5100 southbridge was inadequate for high-bandwidth PCI devices, but not that USB devices were also affected. About a month ago I changed the interface for the uaudio devices to the xhci hub on the pcie bus, and I can't recall a crash since then.

--
  Patrick Harper
  [hidden email]

On Mon, 20 May 2019, at 12:09, Patrick Harper wrote:

> My only resolve was to power the system off from the hardware switch.
> The filesystems on sd0 are repaired during boot up and other
> filesystems are repaired with fsck after that.
>
> I have a direct link to a photo of the console output for those with an
> image viewer:
> https://dl.dropboxusercontent.com/s/zs5pmu36f9dghkc/IMG_20190519_223420.jpg
>
> The split consoles on the screen are not an accident but a consequence
> of my xorg config files.
>
> Below is an attempt to type part of the output from the photo:
>
> Login: kernel: page fault trap, code=0
> Stopped at softclock+0x57: movq %rdx,0x8(%rcx)
> ddb{0}>
>
> At the time of the crash, Chromium, two xterms, xclock, feh and cwm
> were running, but there had been no interaction for at least 30
> seconds. Prior to the incident I had been changing and reloading
> .Xresources, mainly trying to get the Terminus font working in xterm
> with UTF-8 support.
>
> The system has a couple of other issues that might be related. After a
> halt -p, the system will sometimes freeze just short of halting the
> power so I finish the job with the hardware switch. The filesystems are
> already unmounted in this case so I consider this a lesser issue.
>
> A rarer issue is the system failing to resume after the display is
> blanked. The only thing I can do is the same as the kernel crash, power
> off from the switch. All of this happened under 6.4 as well but the 6.4
> system was an online upgrade from 6.3. The 6.5 system is a fresh
> install.
>
> dmesg is below, this is from the boot up following the crash:
>
> OpenBSD 6.5 (GENERIC.MP) #0: Wed Apr 24 23:38:54 CEST 2019
>    
> [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 34325528576 (32735MB)
> avail mem = 33275613184 (31734MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0x9ec00 (82 entries)
> bios0: vendor American Megatrends Inc. version "3303" date 10/28/2014
> bios0: ASUSTeK Computer INC. KCMA-D8
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S1 S3 S4 S5
> acpi0: tables DSDT FACP APIC MCFG SPMI OEMB HPET SRAT SLIT SSDT EINJ
> BERT ERST HEST
> acpi0: wakeup devices PC02(S4) PC03(S4) PC04(S4) PC05(S4) PC06(S4)
> PC07(S4) PC09(S4) PC0A(S4) PC0B(S4) PC0C(S4) PC0D(S4) SBAZ(S4) UAR1(S4)
> UAR2(S4) P0PC(S4) UHC1(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 16 (boot processor)
> cpu0: AMD Opteron(tm) Processor 4332 HE, 3000.43 MHz, 15-02-00
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,ITSC,BMI1
> cpu0: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB
> 64b/line 16-way L2 cache, 8MB 64b/line 64-way L3 cache
> cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully
> associative
> cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully
> associative
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 199MHz
> cpu0: mwait min=64, max=64, IBE
> cpu1 at mainbus0: apid 17 (application processor)
> cpu1: AMD Opteron(tm) Processor 4332 HE, 3000.00 MHz, 15-02-00
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,ITSC,BMI1
> cpu1: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB
> 64b/line 16-way L2 cache, 8MB 64b/line 64-way L3 cache
> cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully
> associative
> cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully
> associative
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 18 (application processor)
> cpu2: AMD Opteron(tm) Processor 4332 HE, 3000.00 MHz, 15-02-00
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,ITSC,BMI1
> cpu2: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB
> 64b/line 16-way L2 cache, 8MB 64b/line 64-way L3 cache
> cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully
> associative
> cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully
> associative
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 19 (application processor)
> cpu3: AMD Opteron(tm) Processor 4332 HE, 3000.00 MHz, 15-02-00
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,ITSC,BMI1
> cpu3: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB
> 64b/line 16-way L2 cache, 8MB 64b/line 64-way L3 cache
> cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully
> associative
> cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully
> associative
> cpu3: smt 1, core 1, package 0
> cpu4 at mainbus0: apid 20 (application processor)
> cpu4: AMD Opteron(tm) Processor 4332 HE, 3000.00 MHz, 15-02-00
> cpu4:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,ITSC,BMI1
> cpu4: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB
> 64b/line 16-way L2 cache, 8MB 64b/line 64-way L3 cache
> cpu4: ITLB 48 4KB entries fully associative, 24 4MB entries fully
> associative
> cpu4: DTLB 64 4KB entries fully associative, 64 4MB entries fully
> associative
> cpu4: smt 0, core 2, package 0
> cpu5 at mainbus0: apid 21 (application processor)
> cpu5: AMD Opteron(tm) Processor 4332 HE, 3000.00 MHz, 15-02-00
> cpu5:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,TOPEXT,CPCTR,ITSC,BMI1
> cpu5: 64KB 64b/line 2-way I-cache, 16KB 64b/line 4-way D-cache, 2MB
> 64b/line 16-way L2 cache, 8MB 64b/line 64-way L3 cache
> cpu5: ITLB 48 4KB entries fully associative, 24 4MB entries fully
> associative
> cpu5: DTLB 64 4KB entries fully associative, 64 4MB entries fully
> associative
> cpu5: smt 1, core 2, package 0
> ioapic0 at mainbus0: apid 22 pa 0xfec00000, version 21, 24 pins, can't
> remap
> ioapic1 at mainbus0: apid 23 pa 0xfec20000, version 21, 32 pins, can't
> remap
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpihpet0 at acpi0: 14318180 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 6 (PC02)
> acpiprt2 at acpi0: bus -1 (PC03)
> acpiprt3 at acpi0: bus 5 (PC04)
> acpiprt4 at acpi0: bus -1 (PC05)
> acpiprt5 at acpi0: bus -1 (PC06)
> acpiprt6 at acpi0: bus -1 (PC07)
> acpiprt7 at acpi0: bus 4 (PC09)
> acpiprt8 at acpi0: bus 3 (PC0A)
> acpiprt9 at acpi0: bus 2 (PC0B)
> acpiprt10 at acpi0: bus -1 (PC0C)
> acpiprt11 at acpi0: bus -1 (PC0D)
> acpiprt12 at acpi0: bus 1 (P0PC)
> acpicpu0 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS
> acpicpu1 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS
> acpicpu2 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS
> acpicpu3 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS
> acpicpu4 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS
> acpicpu5 at acpi0: C2(0@100 io@0x815), C1(@1 halt!), PSS
> acpipci0 at acpi0 PCI0: 0x00000010 0x00000011 0x00000000
> acpicmos0 at acpi0
> "PNP0A05" at acpi0 not configured
> acpibtn0 at acpi0: PWRB
> ipmi at mainbus0 not configured
> cpu0: 3000 MHz: speeds: 3000 2600 2200 1800 1400 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "ATI SR5670 Host" rev 0x02
> ppb0 at pci0 dev 2 function 0 "ATI SR5690 PCIE" rev 0x00: msi
> pci1 at ppb0 bus 6
> radeondrm0 at pci1 dev 0 function 0 "ATI FirePro V5900" rev 0x00
> drm0 at radeondrm0
> radeondrm0: msi
> azalia0 at pci1 dev 0 function 1 vendor "ATI", unknown product 0xaa80
> rev 0x00: msi
> azalia0: no supported codecs
> ppb1 at pci0 dev 4 function 0 "ATI SR5690 PCIE" rev 0x00: msi
> pci2 at ppb1 bus 5
> iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev
> 0x73, msi
> ppb2 at pci0 dev 9 function 0 "ATI SR5690 PCIE" rev 0x00: msi
> pci3 at ppb2 bus 4
> em0 at pci3 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
> d0:17:c2:c9:fd:a1
> ppb3 at pci0 dev 10 function 0 "ATI SR5690 PCIE" rev 0x00: msi
> pci4 at ppb3 bus 3
> em1 at pci4 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
> d0:17:c2:c9:fd:a0
> ppb4 at pci0 dev 11 function 0 "ATI SR5690 PCIE" rev 0x00: msi
> pci5 at ppb4 bus 2
> xhci0 at pci5 dev 0 function 0 "VIA VL805 xHCI" rev 0x01: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "VIA xHCI root hub" rev
> 3.00/1.00 addr 1
> ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 22 int
> 22, AHCI 1.1
> ahci0: port 0: 3.0Gb/s
> ahci0: port 1: 3.0Gb/s
> ahci0: port 2: 3.0Gb/s
> ahci0: port 4: 3.0Gb/s
> ahci0: port 5: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, KINGSTON SKC400S, SAFM> SCSI3
> 0/direct fixed naa.50026b7674000e1b
> sd0: 488386MB, 512 bytes/sector, 1000215216 sectors, thin
> sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD4004FZWX-0, 81.H> SCSI3
> 0/direct fixed naa.5000cca25ddd1d0a
> sd1: 3815447MB, 512 bytes/sector, 7814037168 sectors
> sd2 at scsibus1 targ 2 lun 0: <ATA, WDC WD4004FZWX-0, 81.H> SCSI3
> 0/direct fixed naa.5000cca25ddcce45
> sd2: 3815447MB, 512 bytes/sector, 7814037168 sectors
> sd3 at scsibus1 targ 4 lun 0: <ATA, WDC WD5000BPKX-7, 01.0> SCSI3
> 0/direct fixed naa.50014ee659969bc9
> sd3: 476940MB, 512 bytes/sector, 976773168 sectors
> cd0 at scsibus1 targ 5 lun 0: <HL-DT-ST, BD-RE BH16NS55, 1.02> ATAPI
> 5/cdrom removable
> ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 22 int
> 16, version 1.0, legacy support
> ohci1 at pci0 dev 18 function 1 "ATI SB700 USB" rev 0x00: apic 22 int
> 16, version 1.0, legacy support
> ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 22 int
> 17
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "ATI EHCI root hub" rev
> 2.00/1.00 addr 1
> ohci2 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 22 int
> 18, version 1.0, legacy support
> ohci3 at pci0 dev 19 function 1 "ATI SB700 USB" rev 0x00: apic 22 int
> 18, version 1.0, legacy support
> ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 22 int
> 19
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "ATI EHCI root hub" rev
> 2.00/1.00 addr 1
> piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x3d: SMI
> iic0 at piixpm0
> iic0: addr 0x20 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00
> 0a=00 0b=00 0c=00 0d=00 0e=0d 0f=a4 10=00 11=00 12=00 13=00 14=00 15=00
> 16=17 17=a0 18=c0 19=00 1a=00 1b=00 1c=00 1d=00 1e=0c 1f=05 20=09 21=09
> 22=09 23=09 24=03 3e=03 words 00=ff00 01=0000 02=0000 03=0000 04=0000
> 05=0000 06=0000 07=0000
> iic0: addr 0x21 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 09=00
> 0a=00 0b=00 0c=00 0d=00 0e=00 0f=24 10=00 11=00 12=00 13=00 14=00 15=00
> 16=00 17=24 18=00 19=00 1a=00 1b=00 1c=00 1d=00 1e=00 1f=06 20=09 21=09
> 22=09 23=09 24=03 3e=03 words 00=ff00 01=0000 02=0000 03=0000 04=0000
> 05=0000 06=0000 07=0000
> pciide0 at pci0 dev 20 function 1 "ATI SB700 IDE" rev 0x00: DMA,
> channel 0 configured to compatibility, channel 1 configured to
> compatibility
> pcib0 at pci0 dev 20 function 3 "ATI SB700 ISA" rev 0x00
> ppb5 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00
> pci6 at ppb5 bus 1
> pciide1 at pci6 dev 2 function 0 "CMD Technology PCI0680" rev 0x02
> pciide1: bus-master DMA support present
> pciide1: channel 0 configured to native-PCI mode
> pciide1: using apic 22 int 21 for native-PCI interrupt
> pciide1: channel 1 configured to native-PCI mode
> atapiscsi0 at pciide1 channel 1 drive 0
> scsibus2 at atapiscsi0: 2 targets
> cd1 at scsibus2 targ 0 lun 0: <HL-DT-ST, DVD+-RW GSA-H53N, B104> ATAPI
> 5/cdrom removable
> cd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 2
> "ASPEED Technology AST2000" rev 0x10 at pci6 dev 5 function 0 not
> configured
> ohci4 at pci0 dev 20 function 5 "ATI SB700 USB" rev 0x00: apic 22 int
> 18, version 1.0, legacy support
> pchb1 at pci0 dev 24 function 0 "AMD AMD64 15/0xh Link Cfg" rev 0x00
> pchb2 at pci0 dev 24 function 1 "AMD AMD64 15/0xh Address Map" rev 0x00
> pchb3 at pci0 dev 24 function 2 "AMD AMD64 15/0xh DRAM Cfg" rev 0x00
> km0 at pci0 dev 24 function 3 "AMD AMD64 15/0xh Misc Cfg" rev 0x00
> pchb4 at pci0 dev 24 function 4 "AMD AMD64 15/0xh CPU Power" rev 0x00
> pchb5 at pci0 dev 24 function 5 "AMD AMD64 15/0xh Host" rev 0x00
> usb3 at ohci0: USB revision 1.0
> uhub3 at usb3 configuration 1 interface 0 "ATI OHCI root hub" rev
> 1.00/1.00 addr 1
> usb4 at ohci1: USB revision 1.0
> uhub4 at usb4 configuration 1 interface 0 "ATI OHCI root hub" rev
> 1.00/1.00 addr 1
> usb5 at ohci2: USB revision 1.0
> uhub5 at usb5 configuration 1 interface 0 "ATI OHCI root hub" rev
> 1.00/1.00 addr 1
> usb6 at ohci3: USB revision 1.0
> uhub6 at usb6 configuration 1 interface 0 "ATI OHCI root hub" rev
> 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> usb7 at ohci4: USB revision 1.0
> uhub7 at usb7 configuration 1 interface 0 "ATI OHCI root hub" rev
> 1.00/1.00 addr 1
> vmm0 at mainbus0: SVM/RVI
> uhub8 at uhub0 port 1 configuration 1 interface 0 "VIA Labs USB2.0 Hub"
> rev 2.10/4.20 addr 2
> uhub9 at uhub8 port 1 configuration 1 interface 0 "VIA Labs, Inc.
> USB2.0 Hub" rev 2.10/90.90 addr 3
> uhub10 at uhub8 port 4 configuration 1 interface 0 "GenesysLogic USB2.0
> Hub" rev 2.10/92.12 addr 4
> uhidev0 at uhub10 port 4 configuration 1 interface 0 "NEC EA244UHD" rev
> 2.00/0.02 addr 5
> uhidev0: iclass 3/0
> uhid0 at uhidev0: input=64, output=64, feature=0
> uhub11 at uhub0 port 2 configuration 1 interface 0 "VIA Labs, Inc.
> USB3.0 Hub" rev 3.00/90.91 addr 6
> umass0 at uhub0 port 3 configuration 1 interface 0 "HGST G-DRIVE USB"
> rev 3.00/26.02 addr 7
> umass0: using SCSI over Bulk-Only
> scsibus3 at umass0: 2 targets, initiator 0
> sd4 at scsibus3 targ 1 lun 0: <G-DRIVE, USB, 2602> SCSI4 0/direct fixed
> serial.49718034BE0152901613
> sd4: 3815447MB, 512 bytes/sector, 7814037168 sectors
> umass1 at uhub0 port 4 configuration 1 interface 0 "HGST G-DRIVE USB"
> rev 3.00/26.02 addr 8
> umass1: using SCSI over Bulk-Only
> scsibus4 at umass1: 2 targets, initiator 0
> sd5 at scsibus4 targ 1 lun 0: <G-DRIVE, USB, 2602> SCSI4 0/direct fixed
> serial.49718034BE0152901650
> sd5: 3815447MB, 512 bytes/sector, 7814037168 sectors
> uhub12 at uhub0 port 5 configuration 1 interface 0 " " rev 3.00/92.12
> addr 9
> umass2 at uhub12 port 2 configuration 1 interface 0 "Lexar USB_3_0
> Reader" rev 3.00/0.01 addr 10
> umass2: using SCSI over Bulk-Only
> scsibus5 at umass2: 2 targets, initiator 0
> sd6 at scsibus5 targ 1 lun 0: <Lexar, CF USB_3_0 Read, LX01> SCSI3
> 0/direct removable
> sd7 at scsibus5 targ 1 lun 1: <Lexar, SD USB_3_0 Read, LX01> SCSI3
> 0/direct removable
> sd8 at scsibus5 targ 1 lun 2: <Lexar, MS USB_3_0 Read, LX01> SCSI3
> 0/direct removable
> sd9 at scsibus5 targ 1 lun 3: <Lexar, MSD USB_3_0 Read, LX01> SCSI3
> 0/direct removable
> sd10 at scsibus5 targ 1 lun 4: <Lexar, XD USB_3_0 Read, LX01> SCSI3
> 0/direct removable
> uhub13 at uhub1 port 1 configuration 1 interface 0 "NEC hub" rev
> 2.00/1.00 addr 2
> uhidev1 at uhub13 port 1 configuration 1 interface 0 "Topre Corporation
> HHKB Professional" rev 1.10/1.02 addr 3
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> uhidev2 at uhub13 port 3 configuration 1 interface 0 "Clearly Superior
> Technologies. CST Laser Trackball" rev 2.00/11.00 addr 4
> uhidev2: iclass 3/1
> ums0 at uhidev2: 5 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uvideo0 at uhub1 port 6 configuration 1 interface 0 "Microsoft
> Microsoft\M-. LifeCam VX-7000" rev 2.00/1.00 addr 5
> video0 at uvideo0
> uaudio0 at uhub1 port 6 configuration 1 interface 3 "Microsoft
> Microsoft\M-. LifeCam VX-7000" rev 2.00/1.00 addr 5
> uaudio0: class v1, high-speed, sync, channels: 0 play, 1 rec, 3 ctls
> audio0 at uaudio0
> umass3 at uhub3 port 2 configuration 1 interface 0 "MITSUMI MITSUMI USB
> FDD" rev 1.10/1.00 addr 2
> umass3: using UFI over CBI with CCI
> scsibus6 at umass3: 2 targets, initiator 0
> sd11 at scsibus6 targ 1 lun 0: <MITSUMI, USB FDD, 1049> ATAPI 0/direct
> removable
> uaudio1 at uhub4 port 2 configuration 1 interface 1 "Burr-Brown from TI
> USB Audio CODEC" rev 1.10/1.00 addr 2
> uaudio1: class v1, full-speed, sync, channels: 2 play, 2 rec, 3 ctls
> audio1 at uaudio1
> uhidev3 at uhub4 port 2 configuration 1 interface 3 "Burr-Brown from TI
> USB Audio CODEC" rev 1.10/1.00 addr 2
> uhidev3: iclass 3/0
> uhid1 at uhidev3: input=1, output=0, feature=0
> vscsi0 at root
> scsibus7 at vscsi0: 256 targets
> softraid0 at root
> scsibus8 at softraid0: 256 targets
> root on sd0a (f0a32f31cf87e1dc.a) swap on sd0b dump on sd0b
> WARNING: / was not properly unmounted
> initializing kernel modesetting (CAYMAN 0x1002:0x6707 0x1002:0x0B06).
> radeondrm0: 3840x2160, 32bpp
> wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using
> wskbd0
> wskbd1: connecting to wsdisplay0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> iwm0: hw rev 0x140, fw ver 16.242414.0, address 7c:5c:f8:f3:35:2c
> WARNING: R/W mount of /mnt/int1 denied.  Filesystem is not clean - run
> fsck
> WARNING: R/W mount of /mnt/int1 denied.  Filesystem is not clean - run
> fsck
> --
>   Patrick Harper
>   [hidden email]
>
>