4.8 fail boot

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

4.8 fail boot

FabioFVZ-3
Hello,
after boot on my DL360 G3 2Gb ram, hp array i5 (2x36gb mirroring)
with new 4.8 the boot blocked on:

npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3800 block
softraid0 at root


end .....

NO error, no other info...

4.6 boot regulary...

Reply | Threaded
Open this post in threaded view
|

Re: 4.8 fail boot

Kenneth R Westerback
On Tue, Nov 23, 2010 at 12:33:41PM +0100, fabioFVZ wrote:

> Hello,
> after boot on my DL360 G3 2Gb ram, hp array i5 (2x36gb mirroring)
> with new 4.8 the boot blocked on:
>
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> rd0: fixed, 3800 block
> softraid0 at root
>
>
> end .....
>
> NO error, no other info...
>
> 4.6 boot regulary...
>

4.6 to 4.8 is a long time. Does 4.7 boot? Does a -current snapshot?

How about the usual information about the box? Without some clues
you will get no help.

http://openbsd.org/report.html

.... Ken

Reply | Threaded
Open this post in threaded view
|

Re: 4.8 fail boot

Jiri B.
In reply to this post by FabioFVZ-3
Plug serial cable and get some info.

----------------------------------------

> Date: Tue, 23 Nov 2010 12:33:41 +0100
> From: [hidden email]
> To: [hidden email]
> Subject: 4.8 fail boot
>
> Hello,
> after boot on my DL360 G3 2Gb ram, hp array i5 (2x36gb mirroring)
> with new 4.8 the boot blocked on:
>
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> rd0: fixed, 3800 block
> softraid0 at root
>
>
> end .....
>
> NO error, no other info...
>
> 4.6 boot regulary...

Reply | Threaded
Open this post in threaded view
|

Re: 4.8 fail boot

LeviaComm Networks NOC
I've had no problem with the HP DL360 G3s

I have both
OpenBSD 4.7-current (GENERIC.MP) #560: Wed Apr 28 11:55:01 MDT 2010
and
OpenBSD 4.8 (GENERIC.MP) #359: Mon Aug 16 09:16:26 MDT 2010

running on DL360 G3s.  In a very similar setup as you are describing.
Have you installed any special hardware?  I would also check the Array
Controller utility ( F8 during boot).  The problem is likely there.
Please attach your dmesg if possible.

-Christopher Ahrens



On 23-Nov-10 03:48, Jiri B. wrote:

> Plug serial cable and get some info.
>
> ----------------------------------------
>> Date: Tue, 23 Nov 2010 12:33:41 +0100
>> From: [hidden email]
>> To: [hidden email]
>> Subject: 4.8 fail boot
>>
>> Hello,
>> after boot on my DL360 G3 2Gb ram, hp array i5 (2x36gb mirroring)
>> with new 4.8 the boot blocked on:
>>
>> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> rd0: fixed, 3800 block
>> softraid0 at root
>>
>>
>> end .....
>>
>> NO error, no other info...
>>
>> 4.6 boot regulary...