350MHz IBM Intel Pentium II runs 5.9 fine

classic Classic list List threaded Threaded
12 messages Options
Reply | Threaded
Open this post in threaded view
|

350MHz IBM Intel Pentium II runs 5.9 fine

Craig Skinner-3
Runs fine for me 24*7, for about 15 years. OpenBSD is SUPERB!

5.7 dumped & 5.9 installed on 22nd October:

OpenBSD 5.9 (GENERIC) #1561: Fri Feb 26 01:22:37 MST 2016
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 349 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,PERF
real mem  = 200740864 (191MB)
avail mem = 184385536 (175MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 07/19/99, BIOS32 rev. 0 @ 0xfd861, SMBIOS rev. 2.1 @ 0xf7d95 (32 entries)
bios0: vendor IBM version "PDKT27AUS" date 07/19/99
bios0: IBM 6275500
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP
acpi0: wakeup devices PCI0(S5) PS2K(S1) PS2M(S1) COM1(S5) COM2(S5) USB0(S1)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: C1(@1 halt!)
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xec000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 1 function 0 "S3 Trio3D AGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
piixpcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 90320D2>
wd0: 16-sector PIO, LBA, 3079MB, 6306048 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
wd1 at pciide0 channel 1 drive 0: <Maxtor 90320D2>
wd1: 16-sector PIO, LBA, 3079MB, 6306048 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-540E, 1.0A> ATAPI 5/cdrom removable
wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev 0x01: irq 9
piixpm0 at pci0 dev 2 function 3 "Intel 82371AB Power" rev 0x02: SMI
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL3
spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL3
spdmem2 at iic0 addr 0x52: 64MB SDRAM ECC PC100CL2
spdmem3 at iic0 addr 0x55: 1GB DDR2 SDRAM PC2-5000CL5
xl0 at pci0 dev 16 function 0 "3Com 3c905B 100Base-TX" rev 0x64: irq 11, address 00:50:04:62:35:f8
bmtphy0 at xl0 phy 24: 3C905B internal PHY, rev. 0
xl1 at pci0 dev 18 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 10, address 00:10:5a:f1:9d:b1
exphy0 at xl1 phy 24: 3Com internal media interface
isa0 at piixpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (868fd5d94428712f.a) swap on wd0b dump on wd0b

# sysctl hw.sensors

# pcidump
Domain /dev/pci0:
 0:0:0: Intel 82443BX AGP
 0:1:0: Intel 82443BX AGP
 0:2:0: Intel 82371AB PIIX4 ISA
 0:2:1: Intel 82371AB IDE
 0:2:2: Intel 82371AB USB
 0:2:3: Intel 82371AB Power
 0:16:0: 3Com 3c905B 100Base-TX
 0:18:0: 3Com 3c905B 100Base-TX
 1:1:0: S3 Trio3D AGP

# acpidump -o acpidump; cat acpidump.headers

RSD PTR: Checksum=33, OEMID=IBM, RsdtAddress=0x0bfeff80


RSDT: Length=40, Revision=1, Checksum=233,
        OEMID=IBM, OEM Table ID=CDTPWSPD, OEM Revision=0x1000,
        Creator ID=IBM, Creator Revision=0x0


        Entries={ 0x0bfeff00 }


        DSDT=0xbfed980
        INT_MODEL=PIC
        SCI_INT=9
        SMI_CMD=0xb2, ACPI_ENABLE=0xf0, ACPI_DISABLE=0xf1, S4BIOS_REQ=0x0
        PM1a_EVT_BLK=0xfd00-0xfd03
        PM1a_CNT_BLK=0xfd04-0xfd05
        PM2_TMR_BLK=0xfd08-0xfd0b
        PM2_GPE0_BLK=0xfd0c-0xfd0f
        P_LVL2_LAT=101ms, P_LVL3_LAT=1001ms
        FLUSH_SIZE=0, FLUSH_STRIDE=0
        DUTY_OFFSET=0, DUTY_WIDTH=0
        DAY_ALRM=13, MON_ALRM=0, CENTURY=0
        Flags={WBINVD,PROC_C1,SLP_BUTTON,RTC_S4}


DSDT: Length=9450, Revision=1, Checksum=15,
        OEMID=IBM, OEM Table ID=CDTPWSPD, OEM Revision=0x1000,
        Creator ID=MSFT, Creator Revision=0x1000007

# usbdevs -dv
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
  uhub0
 port 1 powered
 port 2 powered

Reply | Threaded
Open this post in threaded view
|

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

Shazaum
awesome, congrats

On 11/29/2016 12:12 PM, Craig Skinner wrote:

> Runs fine for me 24*7, for about 15 years. OpenBSD is SUPERB!
>
> 5.7 dumped & 5.9 installed on 22nd October:
>
> OpenBSD 5.9 (GENERIC) #1561: Fri Feb 26 01:22:37 MST 2016
>     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 349 MHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,PERF
> real mem  = 200740864 (191MB)
> avail mem = 184385536 (175MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 07/19/99, BIOS32 rev. 0 @ 0xfd861, SMBIOS rev. 2.1 @ 0xf7d95 (32 entries)
> bios0: vendor IBM version "PDKT27AUS" date 07/19/99
> bios0: IBM 6275500
> acpi0 at bios0: rev 0
> acpi0: sleep states S0 S1 S4 S5
> acpi0: tables DSDT FACP
> acpi0: wakeup devices PCI0(S5) PS2K(S1) PS2M(S1) COM1(S5) COM2(S5) USB0(S1)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0: C1(@1 halt!)
> bios0: ROM list: 0xc0000/0x8000
> cpu0 at mainbus0: (uniprocessor)
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
> intelagp0 at pchb0
> agp0 at intelagp0: aperture at 0xec000000, size 0x4000000
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 1 function 0 "S3 Trio3D AGP" rev 0x01
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> piixpcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <Maxtor 90320D2>
> wd0: 16-sector PIO, LBA, 3079MB, 6306048 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> wd1 at pciide0 channel 1 drive 0: <Maxtor 90320D2>
> wd1: 16-sector PIO, LBA, 3079MB, 6306048 sectors
> atapiscsi0 at pciide0 channel 1 drive 1
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <TEAC, CD-540E, 1.0A> ATAPI 5/cdrom removable
> wd1(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
> uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev 0x01: irq 9
> piixpm0 at pci0 dev 2 function 3 "Intel 82371AB Power" rev 0x02: SMI
> iic0 at piixpm0
> spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL3
> spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL3
> spdmem2 at iic0 addr 0x52: 64MB SDRAM ECC PC100CL2
> spdmem3 at iic0 addr 0x55: 1GB DDR2 SDRAM PC2-5000CL5
> xl0 at pci0 dev 16 function 0 "3Com 3c905B 100Base-TX" rev 0x64: irq 11, address 00:50:04:62:35:f8
> bmtphy0 at xl0 phy 24: 3C905B internal PHY, rev. 0
> xl1 at pci0 dev 18 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq 10, address 00:10:5a:f1:9d:b1
> exphy0 at xl1 phy 24: 3Com internal media interface
> isa0 at piixpcib0
> isadma0 at isa0
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on wd0a (868fd5d94428712f.a) swap on wd0b dump on wd0b
>
> # sysctl hw.sensors
>
> # pcidump
> Domain /dev/pci0:
>  0:0:0: Intel 82443BX AGP
>  0:1:0: Intel 82443BX AGP
>  0:2:0: Intel 82371AB PIIX4 ISA
>  0:2:1: Intel 82371AB IDE
>  0:2:2: Intel 82371AB USB
>  0:2:3: Intel 82371AB Power
>  0:16:0: 3Com 3c905B 100Base-TX
>  0:18:0: 3Com 3c905B 100Base-TX
>  1:1:0: S3 Trio3D AGP
>
> # acpidump -o acpidump; cat acpidump.headers
>
> RSD PTR: Checksum=33, OEMID=IBM, RsdtAddress=0x0bfeff80
>
>
> RSDT: Length=40, Revision=1, Checksum=233,
> OEMID=IBM, OEM Table ID=CDTPWSPD, OEM Revision=0x1000,
> Creator ID=IBM, Creator Revision=0x0
>
>
> Entries={ 0x0bfeff00 }
>
>
> DSDT=0xbfed980
> INT_MODEL=PIC
> SCI_INT=9
> SMI_CMD=0xb2, ACPI_ENABLE=0xf0, ACPI_DISABLE=0xf1, S4BIOS_REQ=0x0
> PM1a_EVT_BLK=0xfd00-0xfd03
> PM1a_CNT_BLK=0xfd04-0xfd05
> PM2_TMR_BLK=0xfd08-0xfd0b
> PM2_GPE0_BLK=0xfd0c-0xfd0f
> P_LVL2_LAT=101ms, P_LVL3_LAT=1001ms
> FLUSH_SIZE=0, FLUSH_STRIDE=0
> DUTY_OFFSET=0, DUTY_WIDTH=0
> DAY_ALRM=13, MON_ALRM=0, CENTURY=0
> Flags={WBINVD,PROC_C1,SLP_BUTTON,RTC_S4}
>
>
> DSDT: Length=9450, Revision=1, Checksum=15,
> OEMID=IBM, OEM Table ID=CDTPWSPD, OEM Revision=0x1000,
> Creator ID=MSFT, Creator Revision=0x1000007
>
> # usbdevs -dv
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
>   uhub0
>  port 1 powered
>  port 2 powered

Reply | Threaded
Open this post in threaded view
|

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

KAWAMATA Yoshihiro
In reply to this post by Craig Skinner-3
From: [hidden email] (Craig Skinner)
Subject: 350MHz IBM Intel Pentium II runs 5.9 fine
Date: Tue, 29 Nov 2016 14:12:22 +0000

> Runs fine for me 24*7, for about 15 years. OpenBSD is SUPERB!
>
> 5.7 dumped & 5.9 installed on 22nd October:

Running about 24 * 365 * 15 is great!

I also have an old IBM box.
Aptiva 550 running OpenBSD 6.0

- 4 IDE HDDs, 2 ISA NICs, 4 serial ports.
- Kernel was recompiled for very small memory.
- Serial console, no VGA driver
- Good enough for a NTP server on our LAN.


OpenBSD 6.0-stable (HSV_LITE_NV) #2: Sat Nov  5 10:38:12 JST 2016
    [hidden email]:/opt/usr/src/sys/arch/i386/compile/HSV_LITE_NV
cpu0: Intel 486DX4 ("GenuineIntel" 486-class)
cpu0: FPU,V86
real mem  = 24702976 (23MB)
avail mem = 20316160 (19MB)
mainbus0 at root
bios0 at mainbus0: date 04/12/95
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0: (uniprocessor)
isa0 at mainbus0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
com3 at isa0 port 0x2e8/8 irq 9: ns16550a, 16 byte fifo
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <Conner Peripherals 425MB - CFS425A>
wd0: 16-sector PIO, CHS, 406MB, 839 cyl, 16 head, 62 sec, 832288 sectors
wd1 at wdc0 channel 0 drive 1: <WDC AC2700F>
wd1: 16-sector PIO, LBA, 696MB, 1427328 sectors
wd0(wdc0:0:0): using BIOS timings
wd1(wdc0:0:1): using BIOS timings
wdc1 at isa0 port 0x170/8 irq 15
wd2 at wdc1 channel 0 drive 0: <QUANTUM FIREBALL1280A>
wd2: 8-sector PIO, LBA, 1222MB, 2503872 sectors
wd3 at wdc1 channel 0 drive 1: <QUANTUM TRB850A>
wd3: 8-sector PIO, LBA, 810MB, 1660176 sectors
wd2(wdc1:0:0): using BIOS timings
wd3(wdc1:0:1): using BIOS timings
ne0 at isa0 port 0x240/32 irq 11, NE2000 (RTL8019), address 00:20:18:63:a9:6f
ne1 at isa0 port 0x300/32 irq 10, NE2000, address 00:00:01:13:08:80
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
softraid0 at root
scsibus0 at softraid0: 256 targets
root on wd0a swap on wd0b dump on wd0b

Reply | Threaded
Open this post in threaded view
|

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

butresin
In reply to this post by Craig Skinner-3
On 16.11.29Tue 14:12, Craig Skinner wrote:
>
> real mem  = 200740864 (191MB)
> avail mem = 184385536 (175MB)
...
> spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL3
> spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL3
> spdmem2 at iic0 addr 0x52: 64MB SDRAM ECC PC100CL2
> spdmem3 at iic0 addr 0x55: 1GB DDR2 SDRAM PC2-5000CL5

This is odd.

Reply | Threaded
Open this post in threaded view
|

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

BARDOU Pierre
In reply to this post by KAWAMATA Yoshihiro
It is quite stable also :)
I love this OS... Congrats to the team for all the good work.

This router is used for etherip, and works flawlessly for more than 5 years
now (and counting).
# uptime
 5:59PM  up 1890 days,  1:02, 1 user, load averages: 0.17, 0.11, 0.09
# cat /var/run/dmesg.boot
OpenBSD 4.9-stable (GENERIC.MP) #0: Wed Sep 28 10:37:22 CEST 2011
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(TM) CPU 3.60GHz ("GenuineIntel" 686-class) 3.61 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CNXT-ID,C
X16,xTPR
real mem  = 2147000320 (2047MB)
avail mem = 2101714944 (2004MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/31/99, BIOS32 rev. 0 @ 0xf0000,
SMBIOS rev. 2.3 @ 0xec000 (56 entries)
bios0: vendor HP version "P52" date 02/14/2006
bios0: HP ProLiant DL360 G4
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP SPCR MCFG APIC SSDT
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(TM) CPU 3.60GHz ("GenuineIntel" 686-class) 3.61 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CNXT-ID,C
X16,xTPR
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 9 pa 0xfec10000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
ioapic2 at mainbus0: apid 10 pa 0xfec82000, version 20, 24 pins
ioapic3 at mainbus0: apid 11 pa 0xfec82400, version 20, 24 pins
acpiprt0 at acpi0: bus 1 (IP2P)
acpiprt1 at acpi0: bus 2 (ICHR)
acpiprt2 at acpi0: bus 7 (PCXA)
acpiprt3 at acpi0: bus 10 (PCXB)
acpiprt4 at acpi0: bus 6 (PTB0)
acpiprt5 at acpi0: bus 13 (PTA0)
acpiprt6 at acpi0: bus 3 (PTC0)
acpiprt7 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0: FVS, 3600, 3200, 2800 MHz
acpicpu1 at acpi0: FVS, 3600, 3200, 2800 MHz
acpitz0 at acpi0: critical temperature 31 degC
bios0: ROM list: 0xc0000/0x8000 0xc8000/0x4000! 0xcc000/0x1600
0xee000/0x2000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
bridge io address conflict 0x1000/0x3000
pchb0 at pci0 dev 0 function 0 "Intel E7520 Host" rev 0x0c
ppb0 at pci0 dev 2 function 0 "Intel E7520 PCIE" rev 0x0c
pci1 at ppb0 bus 13
ppb1 at pci0 dev 4 function 0 "Intel E7520 PCIE" rev 0x0c
pci2 at ppb1 bus 6
ppb2 at pci2 dev 0 function 0 "Intel PCIE-PCIE" rev 0x09
pci3 at ppb2 bus 7
ppb3 at pci2 dev 0 function 2 "Intel PCIE-PCIE" rev 0x09
pci4 at ppb3 bus 10
ppb4 at pci0 dev 6 function 0 "Intel E7520 PCIE" rev 0x0c
pci5 at ppb4 bus 3
ppb5 at pci0 dev 28 function 0 "Intel 6300ESB PCIX" rev 0x02
pci6 at ppb5 bus 2
ciss0 at pci6 dev 1 function 0 "Compaq Smart Array 64xx" rev 0x01: apic 9 int
0 (irq 5)
ciss0: 1 LD, HW rev 1, FW 2.80/2.80, 64bit fifo
scsibus0 at ciss0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <HP, LOGICAL VOLUME, 2.80> SCSI2 0/direct fixed
sd0: 34727MB, 512 bytes/sec, 71122560 sec total
bge0 at pci6 dev 2 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 9 int 1 (irq 5), address 00:15:60:ac:ea:1e
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci6 dev 2 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 9 int 2 (irq 5), address 00:15:60:ac:ea:1d
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
uhci0 at pci0 dev 29 function 0 "Intel 6300ESB USB" rev 0x02: apic 8 int 16
(irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 6300ESB USB" rev 0x02: apic 8 int 19
(irq 5)
"Intel 6300ESB WDT" rev 0x02 at pci0 dev 29 function 4 not configured
"Intel 6300ESB APIC" rev 0x02 at pci0 dev 29 function 5 not configured
ehci0 at pci0 dev 29 function 7 "Intel 6300ESB USB" rev 0x02: apic 8 int 23
(irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb6 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x0a
pci7 at ppb6 bus 1
vga1 at pci7 dev 3 function 0 "ATI Rage XL" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Compaq iLO" rev 0x01 at pci7 dev 4 function 0 not configured
"Compaq iLO" rev 0x01 at pci7 dev 4 function 2 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 6300ESB LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 6300ESB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 2.03> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com1: probed fifo depth: 0 bytes
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b

--
Cordialement,
Pierre BARDOU

-----Message d'origine-----
De : KAWAMATA Yoshihiro [mailto:[hidden email]]
Envoyé : mercredi 30 novembre 2016 02:33
À : [hidden email]
Cc : [hidden email]; [hidden email]
Objet : Re: 350MHz IBM Intel Pentium II runs 5.9 fine

From: [hidden email] (Craig Skinner)
Subject: 350MHz IBM Intel Pentium II runs 5.9 fine
Date: Tue, 29 Nov 2016 14:12:22 +0000

> Runs fine for me 24*7, for about 15 years. OpenBSD is SUPERB!
>
> 5.7 dumped & 5.9 installed on 22nd October:

Running about 24 * 365 * 15 is great!

I also have an old IBM box.
Aptiva 550 running OpenBSD 6.0

- 4 IDE HDDs, 2 ISA NICs, 4 serial ports.
- Kernel was recompiled for very small memory.
- Serial console, no VGA driver
- Good enough for a NTP server on our LAN.


OpenBSD 6.0-stable (HSV_LITE_NV) #2: Sat Nov  5 10:38:12 JST 2016
    [hidden email]:/opt/usr/src/sys/arch/i386/compile/HSV_LITE_NV
cpu0: Intel 486DX4 ("GenuineIntel" 486-class)
cpu0: FPU,V86
real mem  = 24702976 (23MB)
avail mem = 20316160 (19MB)
mainbus0 at root
bios0 at mainbus0: date 04/12/95
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0: (uniprocessor)
isa0 at mainbus0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
com2 at isa0 port 0x3e8/8 irq 5: ns16550a, 16 byte fifo
com3 at isa0 port 0x2e8/8 irq 9: ns16550a, 16 byte fifo
wdc0 at isa0 port 0x1f0/8 irq 14
wd0 at wdc0 channel 0 drive 0: <Conner Peripherals 425MB - CFS425A>
wd0: 16-sector PIO, CHS, 406MB, 839 cyl, 16 head, 62 sec, 832288 sectors
wd1 at wdc0 channel 0 drive 1: <WDC AC2700F>
wd1: 16-sector PIO, LBA, 696MB, 1427328 sectors
wd0(wdc0:0:0): using BIOS timings
wd1(wdc0:0:1): using BIOS timings
wdc1 at isa0 port 0x170/8 irq 15
wd2 at wdc1 channel 0 drive 0: <QUANTUM FIREBALL1280A>
wd2: 8-sector PIO, LBA, 1222MB, 2503872 sectors
wd3 at wdc1 channel 0 drive 1: <QUANTUM TRB850A>
wd3: 8-sector PIO, LBA, 810MB, 1660176 sectors
wd2(wdc1:0:0): using BIOS timings
wd3(wdc1:0:1): using BIOS timings
ne0 at isa0 port 0x240/32 irq 11, NE2000 (RTL8019), address 00:20:18:63:a9:6f
ne1 at isa0 port 0x300/32 irq 10, NE2000, address 00:00:01:13:08:80
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
softraid0 at root
scsibus0 at softraid0: 256 targets
root on wd0a swap on wd0b dump on wd0b

Reply | Threaded
Open this post in threaded view
|

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

Craig Skinner-3
In reply to this post by butresin
Hi,

On Wed, 30 Nov 2016 17:09:13 +0100 butresin wrote:

> On 16.11.29Tue 14:12, Craig Skinner wrote:
> >
> > real mem  = 200740864 (191MB)
> > avail mem = 184385536 (175MB)
> ...
> > spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL3
> > spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL3
> > spdmem2 at iic0 addr 0x52: 64MB SDRAM ECC PC100CL2
> > spdmem3 at iic0 addr 0x55: 1GB DDR2 SDRAM PC2-5000CL5
>
> This is odd.
>

None of these IBM Pentium II machines have DDR memory installed.
I don't think it was invented in 1999. The 3 slots are old DIMM.

The other dmesg:

spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC100CL3
spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL3
spdmem2 at iic0 addr 0x52: 64MB SDRAM non-parity PC100CL3
spdmem3 at iic0 addr 0x55: 448MB DDR2 SDRAM PC2-2500CL5

Another identical machine, but with only 2 DIMM slots filled:

spdmem0 at iic0 addr 0x50: 256MB SDRAM non-parity PC133CL2
spdmem1 at iic0 addr 0x51: 256MB SDRAM non-parity PC133CL2
spdmem2 at iic0 addr 0x55: 1GB DDR2 SDRAM PC2-6500CL5

Being an ordinary user, I dunno what that means, but the boxes run fine.

Cheers!
--
Craig Skinner | http://linkd.in/yGqkv7

Reply | Threaded
Open this post in threaded view
|

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

OpenBSD lists
Craig Skinner wrote:

> Hi,
>
> On Wed, 30 Nov 2016 17:09:13 +0100 butresin wrote:
>> On 16.11.29Tue 14:12, Craig Skinner wrote:
>>>
>>> real mem  = 200740864 (191MB)
>>> avail mem = 184385536 (175MB)
>> ...
>>> spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL3
>>> spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL3
>>> spdmem2 at iic0 addr 0x52: 64MB SDRAM ECC PC100CL2
>>> spdmem3 at iic0 addr 0x55: 1GB DDR2 SDRAM PC2-5000CL5
>>
>> This is odd.
>>
>
> None of these IBM Pentium II machines have DDR memory installed.
> I don't think it was invented in 1999. The 3 slots are old DIMM.
>
> The other dmesg:
>
> spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC100CL3
> spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL3
> spdmem2 at iic0 addr 0x52: 64MB SDRAM non-parity PC100CL3
> spdmem3 at iic0 addr 0x55: 448MB DDR2 SDRAM PC2-2500CL5
>
> Another identical machine, but with only 2 DIMM slots filled:
>
> spdmem0 at iic0 addr 0x50: 256MB SDRAM non-parity PC133CL2
> spdmem1 at iic0 addr 0x51: 256MB SDRAM non-parity PC133CL2
> spdmem2 at iic0 addr 0x55: 1GB DDR2 SDRAM PC2-6500CL5
>
> Being an ordinary user, I dunno what that means, but the boxes run fine.
>
> Cheers!
>
Looks like something is misinterpreting ID numbers form the EEPROM on
the memory modules.  But I'd like to see what is physically there before
making a call on what is going wrong, if you have any photos of the
system's motherboard.

I'm thinking that perhaps the DDR2 modules might be for an integrated
graphics chips but are reporting as part of main memory for some reason.
  Older systems like that were a mess and many times buses would be
wired together and whatever is attached to the IIC bus may be some
random peripheral that just happens to have an ID that was later re-used
for a DDR2 module.

Reply | Threaded
Open this post in threaded view
|

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

Aaron Mason
In reply to this post by Craig Skinner-3
Could just be some garbage IBM machines of that era would spit out to
confuse anything not-Winders, as part of an agreement with Microshart.

Might pull out an old machine, give it some NICs and make it a
firewall.  Got an old Lacie 1U storage appliance with a VIA C7 mobo,
just needs an additional NIC and a couple of disks in raid1 and we're
laughing.  Will dmesg once I'm done.

On Thu, Dec 1, 2016 at 11:31 PM, Craig Skinner <[hidden email]> wrote:

> Hi,
>
> On Wed, 30 Nov 2016 17:09:13 +0100 butresin wrote:
>> On 16.11.29Tue 14:12, Craig Skinner wrote:
>> >
>> > real mem  = 200740864 (191MB)
>> > avail mem = 184385536 (175MB)
>> ...
>> > spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC100CL3
>> > spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL3
>> > spdmem2 at iic0 addr 0x52: 64MB SDRAM ECC PC100CL2
>> > spdmem3 at iic0 addr 0x55: 1GB DDR2 SDRAM PC2-5000CL5
>>
>> This is odd.
>>
>
> None of these IBM Pentium II machines have DDR memory installed.
> I don't think it was invented in 1999. The 3 slots are old DIMM.
>
> The other dmesg:
>
> spdmem0 at iic0 addr 0x50: 128MB SDRAM non-parity PC100CL3
> spdmem1 at iic0 addr 0x51: 64MB SDRAM non-parity PC100CL3
> spdmem2 at iic0 addr 0x52: 64MB SDRAM non-parity PC100CL3
> spdmem3 at iic0 addr 0x55: 448MB DDR2 SDRAM PC2-2500CL5
>
> Another identical machine, but with only 2 DIMM slots filled:
>
> spdmem0 at iic0 addr 0x50: 256MB SDRAM non-parity PC133CL2
> spdmem1 at iic0 addr 0x51: 256MB SDRAM non-parity PC133CL2
> spdmem2 at iic0 addr 0x55: 1GB DDR2 SDRAM PC2-6500CL5
>
> Being an ordinary user, I dunno what that means, but the boxes run fine.
>
> Cheers!
> --
> Craig Skinner | http://linkd.in/yGqkv7
>



--
Aaron Mason - Programmer, open source addict
I've taken my software vows - for beta or for worse

Reply | Threaded
Open this post in threaded view
|

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

Alex McWhirter
On a similar note, I have a Sun E6K (circa 1996, 30x 400Mhz CPU's 30GB
of RAM) running 6.0 like a dream, with some minor patches to support
more than 8 disks in softraid 5.

Reply | Threaded
Open this post in threaded view
|

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

Aaron Mason
I've got two Sun Netra X1s (400MHz ultraSPARC IIe, 2GB RAM, 2x40GB
drives) with 5.9 installed, they crash after awhile but I suspect
that's a cooling issue since these things run pretty hot.  I'd use
them as firewalls but I can't push any more than ~50Mbps through them
and I've got a 100/40 fibre connection coming once our house is built.

On Fri, Dec 2, 2016 at 12:19 PM,  <[hidden email]> wrote:
> On a similar note, I have a Sun E6K (circa 1996, 30x 400Mhz CPU's 30GB of
> RAM) running 6.0 like a dream, with some minor patches to support more than
> 8 disks in softraid 5.



--
Aaron Mason - Programmer, open source addict
I've taken my software vows - for beta or for worse

Reply | Threaded
Open this post in threaded view
|

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

Alex McWhirter
On 2016-12-01 22:01, Aaron Mason wrote:

> I've got two Sun Netra X1s (400MHz ultraSPARC IIe, 2GB RAM, 2x40GB
> drives) with 5.9 installed, they crash after awhile but I suspect
> that's a cooling issue since these things run pretty hot.  I'd use
> them as firewalls but I can't push any more than ~50Mbps through them
> and I've got a 100/40 fibre connection coming once our house is built.
>
> On Fri, Dec 2, 2016 at 12:19 PM,  <[hidden email]> wrote:
>> On a similar note, I have a Sun E6K (circa 1996, 30x 400Mhz CPU's 30GB
>> of
>> RAM) running 6.0 like a dream, with some minor patches to support more
>> than
>> 8 disks in softraid 5.

Oddly enough i use netra X1's (500mhz) for routers. But mine routinely
push ~100mb's without issue (no crashing either). ~100mbps seems to be
pretty much the limit with them, mind you i have both nic's bonded with
lacp into some cisco switch gear with public / private traffic split
across vlans.

Reply | Threaded
Open this post in threaded view
|

Re: 350MHz IBM Intel Pentium II runs 5.9 fine

Craig Skinner-3
In reply to this post by OpenBSD lists
Hello again,

On Thu, 1 Dec 2016 16:08:16 -0800 sombody wrote:
> Looks like something is misinterpreting ID numbers form the EEPROM on
> the memory modules.  But I'd like to see what is physically there
> before making a call on what is going wrong, if you have any photos
> of the system's motherboard.
>

These are IBM "Personal Computer 300GL"
Model No. 6275-500
Machine type: 6275
Model: 500

They are used without X as small servers (DHCP, NTP, spamd SMTP
gateways, Squid proxy, package mirror, print server, console server,...)

As with the quarter rack of Sun Netras vertically Ikea racked above them,
they were all made locally in Scotland, so may differ from foreign boxes.

See here: http://web.Britvault.Co.UK/tmp/2016/06-rack/

I'm simply stoked OpenBSD is so solid!

Cool,
--
Craig Skinner | http://linkd.in/yGqkv7