[3.8] hangs at boot, USB ?

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

[3.8] hangs at boot, USB ?

Pascal A. Dupuis
Hello,

trying to install 3.8 on an ACER Aspire 1300 (Athlon XP), the boot
process, after installation and botting from LILO, hangs as follows:

[...]
uhci0 at pci0 dev 17 function 2 "VIA VT83C572 USB" rev 0x1e:irq11
usb0 at uhci0: USB revision 1.0
[...]
auvia0 at pci0 dev 17 function 5 "VIA VT82C686 AC97" rev 0x40: irq11
[...]
vr0 at pci0 dev 18 function 0 "VIA Rhine II" rev 0x51: irq11
[...]
uhci0: host controller process error
     : host controller halted
[...]
pctr: user level cycle counter enabled
mtrr: Pentium Pro MTRR support
uhci_freex:  xfer=0xd0b4a500 not busy, 0x4f48c5155

and from this point, everything is stopped.

I tried various config, with and without an USB mouse connected, with
and without a network wire plugged. Same output. Any idea ?

TIA

Pascal Dupuis

Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm